- Sensor/Scheduler Interface TCNIC IN

transcript

the complete control solution for Motorized FlexShades® Compatible Components

Part Number

ices Single Zone Wired Wall Switch (S1) C112.161

Dual Zone Wired Wall Switch (S2) C112.162

Handheld RF Remote (RFR) C156.270

IR Transmitter and Receiver (IRT/R) 121227

IR Transmitter (IRT) 121228

Network Device Connector (NDC) C156.267

Wireless Network Gateway (WNG) C156.268

A\V Gateway (AVG) C156.269

Sensor/Scheduler Interface (SSI) C156.272

SSI w/ Automated glare control (SSI+) C156.304

Contact Closure Interface (CCI) C156.273

Central Network Controller (CNC) C156.271

IP Gateway (IPG) C156.305

3-Port Network Device Connector (NDC3) C156.311

rol 1 Motor Controller w/enclosure (1MC) C156.285SA

1 Motor Controller (1MC) C156.285

4 Motor Controller w/enclosure (4MC) C156.286SA

s Motor Limit Tool (MLT) C202.047

IntelliFlex I/O Installation Kit (IO-Kit) C504.206SA

For info on other I/O compatible products, visit draperinc.com.

For low voltage wiring requirements, Draper recommends consulting with a

professional low voltage electrical contractor. All low voltage wiring must be run separately from line voltage wiring.

OverviewThe IntelliFlex I/O Sensor / Scheduler Interface allows up to 4 sensors to be added to an IntelliFlex I/O network.

Includes built-in support for brightness, wind and precipitation sensors as well as pyranometers.

Also provided support for up to 8 scheduled override events. Configuration is done using on-board buttons and LCD display.

Features• Supports 0-10V, 4-20mA, photodiode and pulse sensors

• Simple configuration using built-in buttons and LCD display

• Scheduled events can be configured to run on any combination of days of the week

• External power input for sensors provides support for any sensor power requirements

by SSI - Sensor/Scheduler Interface

Technical Specifications - Sensor/Scheduler Interface

Material: ABS plastic

Operating Temp: Ambient

Dimensions: 4 7/8" x 3" x 1" 124 x 76 x 25mm

Mounting: Mounting Hardware Provided

Shipping Weight: 1 lb. 0.45 kg

Indoor Use Only

NDC Required (included)

Optional Power Supply: (C103.154)

C156.272

SSI+ with Automated Glare ControlSensor / Scheduler Interface (SSI) Internal Sun Sensor

External Brightness Sensor

Wind Speed Sensor

Motorized FlexShade® A/C 1MCMotorized FlexShade® A/C 4MC

Motorized FlexShade® A/C

Network Device Connector (NDC)

NDC NDC

NDC NDC NDC

A\V Gateway

Wireless Network Gateway

Central Network Controller

IPGateway

Contact Closure Interface

Motor Limit Tool

Required for use with Wireless RF Remote

Wired Dual Zone SwitchWired Single Zone Switch

Building Management System IntegrationAllows IntelliFlex I/O shading systems to integrate via BACnet IP. Acts as a BMS integration option for I/O systems. They also act as a router between the control network and a building IP network, allowing for communication between networks as well as IP integration with other systems.

3rd Party Control IntegrationRequires A\V GatewayThe AV Gateway is used to integrate with 3rd party control systems such as Lutron, Crestron and others.

Requires WNG

Handheld RF Remote

MOTOR LEADS

SENSOR WIRINGShade Control System Overview

Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999

DATA SHEET TECHNICAL INFO

C156.272_SSI_IO_TechSpec21-R

- Sensor/Scheduler Interface TCNIC IN

Documents