Post on 16-Dec-2015
transcript
Why Bonding?
Some atoms are very reluctant to combine with other atoms and exist in the air around us as single atoms. These are the Noble Gases and have very stable electron arrangements i.e. their outer shells are full.
All other atoms bond together to become electronically more stable (they want noble gas configuration).
Bonding produces new substances and usually only the valence electrons are involved.
Bonding Types
The physical properties of a substance depend on its structure and type of bonding present. Bonding determines the type of structure.
CHEMICAL strong bonds ionic (or electrovalent) covalent dative covalent (or co-ordinate) metallic
PHYSICAL weak bonds van der Waals‘ forces (weakest) dipole-dipole interaction hydrogen bonds (strongest)
Bonding Types
There are 2 major ways in which atoms can bond: Ionic ally Covalently
In ionic bonding, electrons are completely transferred from one atom to another. In the process of either losing or gaining negatively charged electrons, the reacting atoms form ions. The oppositely charged ions are attracted to each other by electrostatic forces, which are the basis of the ionic bond.
Covalent bonding occurs when two (or more) elements share electrons.
Ionic Bonding
Ions are electrically charged particles formed when atoms lose or gain electrons. They have the same electronic structures as noble gases.
Metal atoms form positive ions, while non-metal atoms form negative ions. e.g. Na+, Cl-, Mg2+, O2- etc . If negative electrons are lost the excess charge from the protons
produces an overall positive ion. If negative electrons are gained there is an excess of negative charge, so a negative ion is formed.
The strong electrostatic forces of attraction between oppositely charged ions are called ionic bonds.
Ionic Bonding
Example 1: Sodium Chloride (NaCl)
2:8:1 2:8:7 2:8 2:8:8 An electron is transferred from the 3s orbital of sodium to the 3p orbital of
chlorine; both species end up with the electronic configuration of the nearest noble gas the resulting ions are held together in a crystal lattice by electrostatic attraction
What are the ionic equations? What about the bonding in MgCl2?
ONE combines with ONE to form
1s22s22p63s1 1s22s22p63s23p5 1s22s22p6 1s22s22p63s23p6
Ionic Bonding
Example 2: Magnesium Chloride (MgCl2)
Because magnesium have two outer shell electrons, they can combine with two chlorine atoms by the transfer of one electron to each atom to form one Mg2+ and two Cl- ions
What are the ionic equations?
Mg
Cl
Cl
e¯
e¯
Giant Ionic Crystal Lattice
Oppositely charged ions held in a regular 3-dimensional lattice by electrostatic attraction
The Na+ ion is small enough relative to a Cl¯ ion to fit in the spaces so that both ions occur in every plane.
Cl-Chloride ion
Na+
Sodium ion
Giant Ionic Crystal Lattice
Each Na+ is surrounded by 6 Cl¯ (co-ordination number = 6)
Each Cl¯ is surrounded by 6 Na+ (co-ordination number = 6)
Physical Properties
Melting point very highA large amount of energy must be put in to overcome the strong electrostatic attractions and separate the ions.
Strength Very brittleAny dislocation leads to the layers moving and similar ions being adjacent. The repulsion splits the crystal.
+ +
+ ++ +
+ +- -- -
- -
- -
+ +
+ +
Physical Properties
ElectricalDon’t conduct when solid - ions held strongly in the lattice conduct when molten or in aqueous solution - the ions become mobile and conduction takes place.
Na+Cl- Na+Cl-
Na+Cl-Na+ Cl-
Na+Cl- Na+Cl-
Na+ Cl-
Na+
Cl-
Na+
Cl-
Na+
Cl-
DISSOLVING AN IONIC COMPOUND IN WATER BREAKS UP THE STRUCTURE SO IONS ARE FREE TO MOVE TO THE ELECTRODES
Covalent Bonding
Covalent bonds are formed by atoms sharing electrons to form molecules.
One single covalent bond is a sharing of 1 pair of electrons, two pairs of shared electrons between the same two atoms gives a double bond and it is possible for two atoms to share 3 pairs of electrons and give a triple bond.
This kind of bond or electronic linkage does act in a particular direction i.e. along the 'line' between the two nuclei of the atoms bonded together, this is why molecules have a particular shape. In the case of ionic or metallic bonding, the electrical attractive forces act in all directions around the particles involved.
ClH
Covalent Bonding
Example 1: Two hydrogen atoms form the molecule of the element hydrogen (H2)
Example 2: One atom of hydrogen combines with one atom of Chlorine to give you hydrogen chloride (HCl)
H HH H
Cl H
Covalent Bonding
What about oxygen?
O
each atom needs two electrons to complete its outer shell
each oxygen shares 2 of its electrons to form a
DOUBLE COVALENT BOND
O O O
Covalent Bonding
Atoms share electrons to get the nearest noble gas electronic configuration
Some don’t achieve an “octet” as they haven’t got enough electrons e.g. Al in AlCl3
Others share only some - if they share all they will exceed their “octet” e.g. NH3 and H2O
Atoms of elements in the 3rd period onwards can exceed their “octet” if they wish as they are not restricted to eight electrons in their “outer shell” e.g. PCl5 and SF6
Physical Properties (Covalent Bonding)
For simple covalent molecules (not giant covalent)
ElectricalDon’t conduct electricity as they have no mobile ions or electrons
Solubility Tend to be more soluble in organic solvents than in water
Boiling point The forces between molecules (intermolecular forces) are weak and known as van der Waals forces. Attractions between molecules increases as the molecules get more electrons.e.g. CH4 -161°C C2H6 - 88°C C3H8 -42°C
as the intermolecular forces are weak, little energy is required to separate molecules from each other so boiling points are low
Previously...
CHEMICAL strong bonds Ionic Covalent
Today’s session: PHYSICAL weak bonds
van der Waals‘ forces dipole-dipole interactions hydrogen bonds
Inter/Intra -molecular Forces
Intermolecular attractions are attractions between one molecule and a neighbouring molecule. Weak
All intermolecular attractions are known collectively as van der Waals forces.
There are 2 types:1. Dispersion forces (London forces) or instantaneous dipole-induced
dipole forces2. Dipole-dipole interactions
The forces of attraction which hold an individual molecule together (for example, the covalent bonds) are known as intramolecular attractions. Strong
Intermolecular Forces
In the context of this session, the word dipole means an asymmetric distribution of electron electrical charge to give partially positive and partially negative regions in the same molecule.
In a simple sense its a molecule with a partially positive end and a partial negative charge at the other end.
Electric dipoles may be permanent or transient (temporary) and the molecules discussed here are electrically neutral overall.
These attractive forces can operate between ANY particles whatever their constitution including free atoms in a gas or ions in a crystal etc.
van der Waals Forces
Instantaneous dipole-induced dipole forces/Dispersion Forces Because electrons move quickly in orbitals, their position is
constantly changing; at any given instant they could be anywhere in an atom. The possibility will exist that one side will have more electrons than the other. This will give rise to a dipole...
The dipole on one atom induces dipoles on nearby atoms Atoms are now attracted to each other by a weak forces
Original temporary dipole
Induced dipole
van der Waals Forces
There is no reason why this has to be restricted to a few molecules. As long as the molecules are close together this synchronised movement of the electrons can occur over huge numbers of molecules.
Although the bonding within molecules is strong, between molecules it is weak. (Intramolecular vs. intermolecular)
Strength of Dispersion Forces
The boiling points of the noble gases are Helium -269°C Neon -246°C Argon -186°C Krypton -152°C Xenon -108°C Radon -62°C
What is happening to the boiling point as you go down the group?
Why?
Strength of Dispersion Forces
Group 18 (Noble Gases)
The boiling points increase as you go down the group
All of these elements have monatomic molecules.
The number of electrons increases and hence the radius of the atom.
The more electrons you have, and the more distance over which they can move, the bigger the possible temporary dipoles and therefore the bigger the dispersion forces
Neon molecules will break away from each other at much lower temperatures than argon molecules - hence neon has the lower boiling point.
Strength of Dispersion Forces
Long thin molecules can develop bigger temporary dipoles due to electron movement than short fat ones containing the same numbers of electrons.
Long thin molecules can also lie closer together - these attractions are at their most effective if the molecules are really close.
Butane has a higher boiling point because the dispersion forces are greater. The molecules are longer (and so set up bigger temporary dipoles) and can lie closer together than the shorter, fatter 2-methylpropane molecules.
Will molecular shape have an effect on the strength of dispersion forces?
Use butane and 2-methyl propane to explain your answer.
Electronegativity
The ability of an atom to attract the electron pair in a covalent bond to itself
Non-polar bond e.g. Cl2, O2
similar atoms have the same electronegativity they will both pull on the electrons to the same extent the electrons will be equally shared
Polar bond e.g. HCl different atoms have different electronegativities one will pull the
electron pair closer to its end it will be slightly more negative than average, and the other end slightly more positive. A dipole is formed and the bond is said to be polar.
Greater electronegativity difference = greater polarity
Pauling Scale
The Pauling Scale is a scale for measuring electronegativity values increase across periods values decrease down groups fluorine has the highest value
H 2.1
Li Be B C N O F1.0 1.5 2.0 2.5 3.0 3.5 4.0
Na Mg Al Si P S Cl 0.9 1.2 1.5 1.8 2.1 2.5 3.0
K Br 0.8 2.8
Predict the polarity for the following: S – Cl ; C – O and C – C
Dipole-dipole Interactions
A molecule like HCl has a permanent dipole because chlorine is more electronegative than hydrogen. These permanent, in-built dipoles will cause the molecules to attract each other rather more than they otherwise would if they had to rely only on dispersion forces.
Dipole-dipole interactions occur in addition to Dispersion forces . Molecules that have permanent dipoles will therefore have higher boiling
points than those that have temporary dipoles.
Use ethane and fluoromethane to explain why a molecule with a permanent dipole has a higher boiling point.
Dipole-dipole Interactions
Ethane Fluormethane
Both have the same number of electrons so we expect the dispersion forces to be the same.
Fluromethane has a higher boiling point due to the large permanent dipole on the molecule (because of the highly electronegative Fluorine).
Hydrogen Bond
the attractive force between hydrogen in a polar bond (particularly H-F, H-O, H-N bond) and an unshared electron pair on a nearby small electronegative atom or ion.
Hydrogen Bond
This other atom may be in the same molecule or in a nearby molecule, but always has to include hydrogen.
INTERMOLECULAR HYDROGEN BONDING
Hydrogen Bonds have about 5% of the strength of an average covalent bond Hydrogen Bond is the strongest of all intermolecular forces
INTRAMOLECULAR HYDROGEN BONDING
One of the most remarkable consequences of H-bonding is found in the lower density of ice in comparison to liquid water, so ice floats on water.
The molecules in the solid are more densely packed than in the liquid. A given mass of ice occupies a greater volume than that of liquid water because of an ordered open H-bonding arrangement in the solid (ice) in comparison to continual forming & breaking H-bonds as a liquid.