Post on 05-Apr-2018
transcript
7/31/2019 000-565 (2)
1/50
Topic 1, Volume A
QUESTION NO: 1
A customer wants to add some logic around specific IBM Tivoli Network Manager IP Edition V3.9
poller generated events. Where would an administrator put this logic?
A. add an exception filter clause to the ncmonitor.noEvent table
B. modify the nco_p_ncpmonitor rules file to include the required logic
C. modify the ncp_poller event generation ruleset to prevent the events from being sent
D. change the EventGatewaySchema.cfg configuration file to prevent the events from reaching the
ObjectServer
Answer: B
Explanation:
QUESTION NO: 2
What does this entry do in the DiscoCollectorFinderSeeds.DOMAIN.cfg in IBM Tivoli Network
Manager IP Edition V3.9 (ITNM)?
insert into collectorFinder.collectorRules ( m_Host, m_Port, m_NumRetries ) values (
"172.16.25.1", 8082, 5 ) ;
A. The collector agent running on the ITNM server connects to the EMS running on port 8082 to
collect its data.
B. The collector agent running on the ITNM server connects to the collector running on port 8082
to collect its data.
C. The collector agent running on 172 16 25 1 connects locally to the collector running on port
8082 to collect its data.
D. The collector agent running on the ITNM server connects to the collector running on 172.16.25
1 port 8082 to collect its data.
Answer: D
Explanation:
QUESTION NO: 3
How can discovery be configured to run at 7:00 p.m. every night?
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 2
7/31/2019 000-565 (2)
2/50
A. run the script $PRECI`SION_HOME/scripts/perl/scripts/ncp_autodiscovery.pl 1900
B. edit the SPRECISIONJHOMBdisco/stitchers/FullDiscovery.stch file and add in the line within
the StitcherTrigger section:
ActOnDemand(( m_TimeOfDay) values (1900););
C. edit the $PRECISION_HOME/disco/stitchers/FullDiscovery.stch file and add in the line within
the StitcherTrigger section:
ActOnTimedTrigger(( m_TimeOfDay) values (1900););D. edit the $PRECISION_HOME/disco/stitchers/FullDiscovery stch stitcher and add in the line
within the StitcherRules section:
ActOnDemand(( m_TimeOfDay) values (1900););
Answer: C
Explanation:
QUESTION NO: 4
Which restriction is in place when using a silent install mode?
A. The installation process cannot be canceled at any time
B. The silent install file cannot be edited after it has been created.
C. The silent install file cannot be moved between hosts and then reused.
D. The silent install mode is only suitable for a default standard installation
Answer: A
Explanation:
QUESTION NO: 5
A company wants to create a new drop-down list that an operator can use when creating new
dynamic network views. The list will hold the customerName and customerLocation information.This information was collected during the discovery phase and added to the model. The
administrator has already extended the NCIM database with a new table called Customer which
has two fields: customerName and customerLocation. The model has been configured to populate
this new table. Which additional step does the administrator need to take to display the new table
in the dropdown list?
A. add this table to the appropriate section in the topoviz.properties
B. modify the ncimMetaDataxml file by adding the appropriate table and data fields
C. modify the DBEntityDetails.cfg file by specifying a new drop-down list and the name of the table
created in the NCIM database
D. no additional step is required as the network view configuration automatically has access to all
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 3
7/31/2019 000-565 (2)
3/50
of the tables in the NCIM database and will create a drop-down list for each and every table
Answer: B
Explanation:
QUESTION NO: 6
The IBM Tivoli Network Manager IP Edition V3.9 administrator received a request to create a new
domain with a default set of configuration files and poll policies. A Dbl_ogins.DOMAIN.cfg file has
already been created with the appropriate access details. Which action must be taken?
A. rundomain_create.pl -domain
B. rundomain_create.pl -domain -default
C. manually insert the domain details into the ncim.domainMgr table
D. start the ncp_ctrl process for the new domain name - defaults will be applied
Answer: A
Explanation:
QUESTION NO: 7
How should an administrator deploy IBM Tivoli Network Manager IP Edition V3.9 using a
command line installation on a Windows system?
A. console_install.exe
B. launchpad_console.exe
C. launchpad.exe -console
D. install.exe -i console
Answer: D
Explanation:
QUESTION NO: 8
If NCIM replication is enabled, which statement is true?
A. Only IBM DB2 can be used for NCIM replication.
B. Two NCIM databases exist, one in the primary domain and one in the backup domain.
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 4
7/31/2019 000-565 (2)
4/50
C. IBM Tivoli Network Manager IP Edition V3.9 (ITNM) must connect to a pair of virtual
ObjectServers.
D. There will only be one ncp_g_event running for all of ITNM.
Answer: B
Explanation:
QUESTION NO: 9
By default, which three fields are used by the event gateway to link an event to a topology entity?
(Choose three.)
A. @Node
B. @Class
C. @bEventld
D. @Identifier
E. @LocalPriObj
F. @LocalNodeAlias
Answer: C,E,F
Explanation:
QUESTION NO: 10
Which two statements are true about installing IBM Tivoli Network Manager IP Edition V3.9
(ITNMJ on a Solaris platform? {Choose two.)
A. The ITNM destination directory must be owned as root.
B. If ITNM is installed as a non-root user, all future Tivoli products must be installed as the sameuser.
C. The setup_setuid_as_root.sh script must be run as root if ITNM is installed and will run as non-
root.
D. The setup_setuid_as_root.sh script must be run as non-root if ITNM is installed and will run as
non-root.
E. Multiple ITNM installations on the same server can be installed with both the root account and a
non-root account.
Answer: B,C
Explanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 5
7/31/2019 000-565 (2)
5/50
QUESTION NO: 11
In IBM Tivoli Network Manager IP Edition V3.9 given a requirement to discover a new node but not
place it in the topology correctly, which two tasks must be performed when doing partial
rediscovery? (Choose two.)
A. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery RebuildLayers is checked
B. ensure the necessary agents are enabled under Network Discovery Configuration > Partial
Rediscovery Agents tab
C. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery Rebuild
Layers is unchecked
D. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery of
Related Devices is checked
E. ensure the option Network Discovery Configuration > Advanced > Enable Rediscovery of
Related Devices is unchecked
Answer: B,C
Explanation:
QUESTION NO: 12
Which file contains the SNMP community strings and settings for an IBM Tivoli Network ManagerIP Edition V3.9 (ITNM) domain named ITNM NCP?
A. CtrlServices.ITNM_NCP.cfg
B. SnmpStackSchema.ITNM_NCP.cfg
C. SnmpStackSecuritylnfo.ITNM_NCP.cfg
D. DiscoSnmpHelperSchema.ITNM_NCP.cfg
Answer: C
Explanation:
QUESTION NO: 13
What is the primary issue with installing IBM Tivoli Network Manager IP Edition V3.9 (ITNM) as a
root user on a single UNIX system in combination with other Tivoli products?
A. The system will not run properly as a root user.
B. ITNM might not be compatible with other Tivoli products.
C. There are no issues related to installing as root on a UNIX system.
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 6
7/31/2019 000-565 (2)
6/50
D. There are extra post-installation configuration steps to complete in order to run the core
components as the root user.
Answer: B
Explanation:
QUESTION NO: 14
Which scenario is suitable for using default adaptive polls?
A. rapid confirmation that the poll is active
B. rapid confirmation that a device is down
C. rapid confirmation of a threshold resolution
D. rapid confirmation that a device is functioning
Answer: B
Explanation:
QUESTION NO: 15
During a deployment, a customer has identified location data that they would like added to both
chassis and interface events from active (IBM Tivoli Network Manager IP Edition V3.9 (ITNM)) and
passive (traps, syslog etc.) event sources.
This data has been successfully imported into the Discovery process using supported stitching
techniques and appears in the topology as three custom Extralnfo fields (see below).
Ncpjnode1 has been configured to transfer this location data to a custom extended NCIM
database table named locations (see exhibit below). This data is only held on EntityType 1(chassis entities) to reduce the NCIM load.
The customer has identified three ObjectServer fields that they would like this data :o be added to
for all suitable events -NmosGeography, NmosCountry, and NmosSite
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 7
7/31/2019 000-565 (2)
7/50
Example record in Model
Description of the ncim.locations table
The ModelNcimDb cofiguration has been modified to map:
Based on the scenario, what is the correct stitcher method to populate a record with Extralnfo >
m_Geogrpahy location data and then update the NmosGeography ObjectServer field?
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 8
7/31/2019 000-565 (2)
8/50
Assume that a chassis and locationData Records have been defined and the mainNodeld is set to
the Entityld of the chassis of the in scope event.
Example:
Record chassis;
Record locationData.
text geog-'.
chassis = GwEntityData( mainNodeld);
A. geog=@chassis.tocations.GEOGRAPHY;
@locationData.NmosGeography = geog.
GwEnrichEvent( locationData);
B. geog=@chassis.Extralnfo.m_Geography;
@locationData.NmosGeography = geog;
GwEnrichEvent(locationData);
C. NmosGeography = eval(text, '&8m_Geography');
GwEnrichEvent (NmosGeography);
D. NmosGeogrpahy = @chassis.locations.GEOGRAPHY;
@locationData.NmosGeography = eval(text, '$NmosGeography');
GwEnrichEvent (locationData);
Answer: AExplanation:
QUESTION NO: 16
A customer wants to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) in their
environment. They plan to discover and monitor specific various network devices and servers that
are throughout their enterprise. The customer wants to ensure that they manage only a list ofdevices in their network with a specific naming convention. They currently keep track of these
devices using a CSV file of IP addresses, hostnames and locations and have SNMP and ping
access to these systems. Currently their DNS server and SysName naming conventions are not
consistent. The customer also wants to ensure that they do not discover IP addresses outside the
CSV list.
Which discovery seeding method best suits their ITNM configuration?
A. configure the Collector Finder by seeding the discovery and converting the CSV file to an XML
file
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 9
7/31/2019 000-565 (2)
9/50
B. configure the Ping Finder by adding a list of subnets from the list of IP addresses using the
CSV file
C. configure the File Finder to point to the CSV file on the Network Manager server with a comma
delimiter
D. ensure Feedback is enabled and then configure the Ping Finder and the File Finder by adding a
list of subnets using the CSV file
Answer: C
Explanation:
QUESTION NO: 17
The scope of the discovery contains the IBM Tivoli Network Manager IP Edition V3.9 (ITNM)
server and the gateway trace file shows that this is being used successfully as the correctNcpServerEntity. However, the isolated suppression method is not working. What would cause
this?
A. The ITNM server is not being directly polled for status.
B. The ITNM server is not connected to the rest of the topology.
C. There was no SNMP access to the ITNM server so the IP address is not known.
D. The Root Cause Analysis plug-in has not been explicitly configured to use the ITNM server.
Answer: BExplanation:
QUESTION NO: 18
A custom event has been added requiring the creation of a new EventMap. How is this EventMap
associated with the RCA plug-in?
A. register the EventMap with the RCA plug-in using the ncp_gwplugins.pl script
B. ensure that the Eventld is mapped to the EventMap in the NcoGatelnserts.cfg file
C. edit the EventGatewaySchema.cfg and include the EventMap in the ncp2nco section
D. no action needed - any EventMap in the EventGatewaySchema.cfg file will be passed to the
RCA plug-in by default
Answer: A
Explanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 10
7/31/2019 000-565 (2)
10/50
7/31/2019 000-565 (2)
11/50
Explanation:
QUESTION NO: 22
Where is the MIB graph log located in IBM Tivoli Network Manager IP Edition V3.9?
A. $lTNMHOME/logs/tnm
B. $NCHOME/log/precision
C. $TIPHOME/profiles TIPProfile/logs/tnm
D. $ITNMHOME/profiles TIPProfile/logs/tnm
Answer: D
Explanation:
QUESTION NO: 23
Which OQL query determines the SNMP access status of seeded devices?
A. select* from Details.returns;
B. select* from Details despatch;C. select "from finders.processing;
D. select" from translations.ipToBaseName;
Answer: A
Explanation:
QUESTION NO: 24
The IBM Tivoli Network Manager IP Edition V3.9 administrator is asked to create a network path
view at a user's request. The user asks that both directions for network traffic are visualized. What
does the administrator need to do?
A. Nothing. This is performed automatically by the network path tool.
B. Nothing. Network traffic has to flow the same way in both directions.
C. Check Define All Paths in the Network Path Tool configuration screen.
D. Check the Get Return Path field in the Network Path Tool configuration screen.
Answer: D
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 12
7/31/2019 000-565 (2)
12/50
Explanation:
QUESTION NO: 25
Which two Basic views can be used in filters for creating network views? (Choose two.)
A. interfaces
B. FilterView
C. entityData
D. Detailsreturns
E. mainNodeDetails
Answer: A,E
Explanation:
QUESTION NO: 26
What is the installation directory restriction when integrating IBM Tivoli Network Manager IP
Edition V3.9 with IBM Tivoli Business Service Manager?
A. The directory must not contain spaces.
B. The directory must not contain periods.
C. The directory must not contain slashes.
D. The directory must not contain mixed case.
Answer: A
Explanation:
QUESTION NO: 27
Which file must be modified to extend NCIM to include new data that has been included in the
model for Extralnfo > City?
A. $NCHOME/etc/precision/DbSchema.cfg
B. $ITNMHOME/etc/precision/DbSchema.cfg
C. $NCHOME/etc/precision/ModelSchema.cfg
D. $NCHOME/etc/precision/DbEntityDetails.cfg
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 13
7/31/2019 000-565 (2)
13/50
Answer: D
Explanation:
QUESTION NO: 28
Which statement is true about the post-installation configuration of IBM Tivoli Network Manager IP
Edition V3.9 as a non-root user on an AIX platform?
A. install the AIX Security Kit as root
B. modify the ulimit settings for the non-root user
C. run this script as root $PRECISION_HOME/scripts/setup_run_as_root.sh
D. run this script as root $PRECISION_HOME/scripts/setup_run_as_setuid_as_root.sh
Answer: D
Explanation:
QUESTION NO: 29
What are three requirements to limit discovery to only a list of nodes stored in a CSV file? (Choose
three.)
A. clear check box from Use File Finder in Discovery
B. change Enable Feedback Control to No Feedback
C. clear check boxfrom Use Ping Finder in Discovery
D. in the drop-down box labeled File Type, choose .csv
E. add new seed in the Use Ping Finder in Discovery section
F. enter the provided CSV file in the Use File Finder in Discovery section
Answer: B,C,FExplanation:
QUESTION NO: 30
Which default configuration file lists all the active finders in IBM Tivoli Network Manager IP Edition
V3.9?
A. DiscoConfig.cfg
B. DiscoSchema.cfg
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 14
7/31/2019 000-565 (2)
14/50
C. ConfigSchema.cfg
D. DiscoFileFinderParseRules.cfg
Answer: A
Explanation:
QUESTION NO: 31
A new poll has been defined within IBM Tivoli Network Manager IP Edition V3.9 (ITNM) and this
generates an event into the ObjectServer as expected. What is the default behavior for ITNM
events within the EventGateway and root cause analysis (RCA) plug-in?
A. Events generated by the ITNM poller will be passed to the RCA plug-in by default.
B. Events generated by the ITNM poller are not suitable for use within RCA calculations.
C. Events generated by the ITNM poller have to be explicitly defined to be passed to the RCA
plug-in.
D. The RCA plug-in receives events directly from the poller and do not need to pass through the
EventGateway.
Answer: C
Explanation:
QUESTION NO: 32
Which command allows access to the alerts.status table from the IBM Tivoli Network Manager IP
Edition V3.9 server?
A. itnm_start nco
B. ncp_sql -server -username
C. nco_sql -domain -username D. ncp_oql -service ObjectServer -domain -username
Answer: D
Explanation:
QUESTION NO: 33
A Juniper J6300 router with an OID of 1.3.6.1.4.1.12532.253 has been introduced the network but
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 15
7/31/2019 000-565 (2)
15/50
there is no classification for this device. What ensures the device inherits all properties of the base
Juniper class when added to the new AOC file?
A. sub_class ='Juniper1'
B. superclass ='Juniper'
C. parent_class = Juniper1
D. instantiation_class ='Juniper'
Answer: B
Explanation:
QUESTION NO: 34
Which file is modified to configure the processes that are started automatically by the ncp_ctrl
process?
A. CtrlServices.cfg
B. ItnmServices.cfg
C. DiscoSchema.cfg
D. CtrlServicesSchema.cfg
Answer: A
Explanation:
QUESTION NO: 35
In IBM Tivoli Network Manager IP Edition V3.9 which command enables NAT Translation given
write access to the configuration files?
A. edit DiscoSchema.cfg - set m_UsingNAT to 0 and m_NATStatus to 1 under disco.NATStatus
table
B. edit DiscoSchema.cfg - set m_UsingNAT to 1 and m_NATStatus to 0 under disco.NATStatus
table
C. edit DiscoConfig.cfg - set m_UsingNAT to 0 and m_NATStatus to 1 under disco.NATStatus
table
D. edit DiscoConfig.cfg - set m_UsingNAT to 1 and m_NATStatus to 0 under disco.NATStatus
table
Answer: D
Explanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 16
7/31/2019 000-565 (2)
16/50
QUESTION NO: 36
What should an administrator run to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM)
using the install wizard on a UNIX system?
A. deploy.sh
B. launchpad.sh
C. installwizard.sh
D. install.sh -i wizard
Answer: B
Explanation:
QUESTION NO: 37
Within the post-discovery filter builder, what is the correct syntax to stop all non-Cisco devices
from being instantiated to model?
A. Entity Type like 'Cisco'B. Entity Type not like'Cisco'
C. Entity OIDIike'l3\6\1\9\'
D. Entity OID not like'1\3\6\1\4\1\9\'
Answer: C
Explanation:
QUESTION NO: 38
By default, when IBM Tivoli Integrated Portal is configured to authenticate against LDAP, which
authentication method is used for ncp_oql for IBM Tivoli Network Manager IP Edition V3.9 core
processes?
A. LDAP
B. No Authentication
C. NCIM AuthenticationD. ObjectServer Authentication
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 17
7/31/2019 000-565 (2)
17/50
Answer: B
Explanation:
QUESTION NO: 39
What is the most efficient way to retrieve additional chassis information that resides in the public
MB using SNMP during the discovery process?
A. use the Details.agnt and add the additional SNMP requests
B. use the ExtraDetails.agnt and add the additional SNMP requests
C. use the IBM Tivoli integrated Portal and add the required SNMP variables in the Advanced
section of Network Discovery Configuration tab
D. use the IBM Tivoli Integrated Portal, activate the Addlnfo agent in Network Discovery
Configuration page, and add the required SNMP variables in the Configuration pane of the Agent
section
Answer: B
Explanation:
QUESTION NO: 40
A custom discovery stitcher has been used to create a custom ItnmService Service-affecting
Event (SAE) object. These objects contain a customer name field in Extralnfo-
>m_CustomerName. This data has been transferred to NCIM and is held in a column called
customerName in a custom table called customerData using a new EntityMap in
DbEntityDetails.cfg.
What must be done to ensure this field is used in the SAE summary?
A. modify the ObjectServer SAE databases (precision.service_details) to include the custom field
B. ensure that events about this service are enriched by the StandardEnrichment filter to include
the Extralnfo->m_CustomerName field
C. modify the SaeltnmService.cfgfileto include customerData->CUSTOMERNAME in the
appropriate insert statement for the CustomerNameField
D. configure the NcoSAESchema.cfg configuration file to include Extralnfo->m_CustomerName in
the appropriate insert statement for the CustomerNameField
Answer: CExplanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 18
7/31/2019 000-565 (2)
18/50
QUESTION NO: 41
Click the Exhibit button.
A user is trying to create a network view that combines standard IBM Tivoli Network Manager IP
Edition V3.9 (ITNM) topology attributes with a custom ObjectServer column. When they use the
drop-down list in the Network View Filter builder the column name does not appear. Which action
displays the custom ObjectServer column?
A. edit the EventGatewaySchema.cfg to ensure that the Adaptive Polling plug-in is configured with
the correct ObjectServer column name
B. edit the ncimMetaDataxmlTopoviz configuration file to ensure that the custom name is included
in the searchable columns for the activeEvent table
C. modiiythe ncim.mainNodedetailsviewto include the column name taking care to match the
name and type exactly as they appear in the ObjectServer
D. edit the activeEvent table in the ncmonitor database to include the custom column name and
type and restart the appropriate processes to allow these to be picked up
Answer: D
Explanation:
QUESTION NO: 42
The nco_p_ncpmonitor fails to start. Which two methods can verify connectivity to the
ObjectServer exists? (Choose two.)
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 19
7/31/2019 000-565 (2)
19/50
A. ncp_ping
B. nco_ping
C. nco_probe
D. ncp_g_event
E. nco_sql-server
Answer: B,EExplanation:
QUESTION NO: 43
Which agent discovers data from devices involved in multicast groups and routes?
A. CellPath90
B. StandardPIM
C. StandardRPR
D. CollectorLayer3
Answer: B
Explanation:
QUESTION NO: 44
An IBM Tivoli Network Manager IP Edition V3.9 (ITNM) domain PRIMARY_NCP is installed and
configured with a MySQL NCIM Database. Which MySQL query verifies that the ITNM domain is
configured?
A. select* from ncpolldata.domainMgr;
B. select* from ncim.status where domain = 'PRIMARY_NCP';C. select* from ncim.domainMgr where domainName = PRIMARY_NCP';
D. select*from mainNodeDetailswhere domainName ='PRIMARY_NCP';
Answer: C
Explanation:
QUESTION NO: 45
When IBM Tivoli Network Manager IP Edition V3.9 (ITNM) is configured to a remote virtual
ObjectServer pair, which ObjectServer entry list in omni.dat is necessary on the ITNM server?
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 20
7/31/2019 000-565 (2)
20/50
A. one for Virtual ObjectServer Pair
B. one for Primary and one for Backup
C. one for Primary, one for Backup, and one for Virtual ObjectServer Pair
D. one for Primary, one for Backup, one for ITNM fail-over, and one for Virtual ObjectServer Pair
Answer: C
Explanation:
QUESTION NO: 46
Which image type is recommended for scaling when creating an icon for a device class?
A. TIF image
B. JPG image
C. PNG image
D. SVG image
Answer: D
Explanation:
QUESTION NO: 47
A discovery is running against 800 devices and the majority of the devices are Cisco routers and
switches. The current phase of Discovery is in Phase 3 and the CiscoSwitchSnmp agent is still
running. The administrator wants to know how many devices are left to be discovered. Which
query returns the IP addresses left to discover?
A. select Address from master.entityByName;
B. select m_IsManagementIP from translations.ipToBaseName where m_Protocol = 1;C. select Address from CiscoSwitchSnmp.despatch where Address NOT IN ((select Address from
CiscoSwitchSnmp.returns));
D. select mUniqueAddress from CiscoSwitchSnmp.despatch where mUniqueAddress NOT IN
((select mUniqueAddressfrom CiscoSwitchSnmp.returns));
Answer: D
Explanation:
QUESTION NO: 48
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 21
7/31/2019 000-565 (2)
21/50
Which three databases are supported by IBM Tivoli Network Manager IP Edition V3.9? (Choose
three.)
A. IDS V11.5
B. Oracle 11g
C. MySQL V4.5
D. MSSQL2008E. IBMDB2V97
F. Ingres Database 10
Answer: A,B,E
Explanation:
QUESTION NO: 49
A customer does not know the IP ranges in use in the network other than they all start with 10.0*.
Which restriction is applied to wildcard scopes in the Scope Properties dialog?
A. A wildcard scope can only be used in conjunction with the Exclude option.
B. IPv4 wildcards are not permitted; only IPv6 subnets can be entered as a wildcard.
C. A wildcard scope cannot be used in conjunction with the Add To Ping Seed List option.
D. A Class B equivalent wildcard is not permitted, wildcard scopes must be lower than a ClassB.
Answer: C
Explanation:
QUESTION NO: 50
A company is deploying the NCIM database to a remote server with hostname RM_NCIM. Inwhich file should the proper configuration setting be made so that the core components can
communicate with the remote database?
A. $NCHOME/etc/precision/NcoLogincfg
B. $NCHOME/etc/precision/DbLogins.cfg
C. $NCHOME/etc/precision/ncimLogin.cfg
D. $NCHOME/etc/precision/ModelSchema..cfg
Answer: BExplanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 22
7/31/2019 000-565 (2)
22/50
QUESTION NO: 51
How can a user set up a network view to show all devices with a primary IP address on a subnet
that starts with 172.1.2?
A. ipAddress like'171.1.2'
B. ipAddress like '172.1.2.?'
C. ipAddress like'172.1.2.#'
D. ipAddress like '172.1.2%'
Answer: D
Explanation:
QUESTION NO: 52
What two types of discoveries can be made using the graphical user interface? (Choose two.)
A. Full Discovery
B. Half Discovery
C. Fast DiscoveryD. Total Discovery
E. Partial Discovery
Answer: A,E
Explanation:
QUESTION NO: 53
A customer has created a new set of poll policies that are targeted against specific network views
using adaptive polling. The filter conditions for these network views are broad and may contain a
large number of devices for the poll policy to run against. Which two actions limit the impact this
may have on the other polling? (Choose two.)
A. assign a policy throttle to the poll policy limiting the maximum number of targets
B. assign a Maximum Node limit in the Network View Filter builder or in the template file
C. reduce the scope of the Network View filter to limit the number of devices that will be in the viewat any one time
D. change the status.map.maxnodes Topoviz status property to limit the number of devices within
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 23
7/31/2019 000-565 (2)
23/50
the networkviews
E. create a specific poller instance and assign the policy to this poller ensuring that the impact on
the existing polling is minimized
Answer: A,E
Explanation:
QUESTION NO: 54
In IBM Tivoli Network Manager IP Edition V3.9 what does the ncp_mib command do when
executed after installing the product?
A. It displays the version number of all MIB modules.
B. It loads all MIB modules from $NCHOME/precision/mibs to the NCMIB database.
C. It loads and displays a list of the MIB modules contained in the MIB files and states which ones
are resolved.
D. It reloads and displays differences whether all MIB modules ($NCHOME/precision/mibs) are in
sync with ncmib*' tables
Answer: D
Explanation:
QUESTION NO: 55
What is the correct method to temporarily unmanage an interface found in the topology?
A. locate the interface in the structure browser, use the Tools menu and chose Unmanage
B. locate the interface in the structure browser, right-click on it, and chose Unmanage from the
menuC. modify the $NCHOME/precision/disco/stitchers/ManagedStatus.stch to set the interface to
Extralnfo > ManagedStatus=1
D. modify the $NCHOME/precision/disco/stitchersyTagManagedEntities.stch to set the interface to
Extralnfo > ManagedStatus=2
Answer: A
Explanation:
QUESTION NO: 56
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 24
7/31/2019 000-565 (2)
24/50
7/31/2019 000-565 (2)
25/50
Which two statements are true about configuring fail-over? (Choose two.)
A. A static port can be configured in Configltnm.cfg file.
B. A static port can be configured in ServiceData.cfg file.
C. Ctrl Services is the preferred method for configuring fail-over.
D. The Configltnm.cfg files must be identical on both primary and backup.
E. Only ncp_model, ncp_poller and ncp_disco can be configured to fail-over
Answer: B,D
Explanation:
QUESTION NO: 60
The administrator of TELCO would like to create a page with a MIB browser to present two key
metrics on a video wall. These metrics are not straightforward OIDs but the result of some basic
calculations. Each result is based on the sum of three OID values. What should the administrator
do?
A. This is not possible because the MIB browser only supports the mapping of up to two plain
OD's.
B. The calculation of each metric (OID1 + OID2 + OID3) should be entered in the MIB OID
configuration of the MIB browser.
C. A poll definition should be created for each metric and used as entry in the Poll Data
configuration field of the MIB browser.
D. This is not possible because the two metrics are based on a total of six OIDs which is more
than the maximum two allowed.
Answer: C
Explanation:
QUESTION NO: 61
One feature of IBM Tivoli Network Manager IP Edition V3.9 is the ability to launch context-based
Web applications. The network view can be launched with the context. How is this done in the
URL?
A. https://host:port/ibm/console/ncp_topoviz/id=10690
B. https://host:port/ibm/console/NetworkView.do?id=10690C. https://host:port/ibm/ncp_topoviz/NetworkView.do?id=10690
D. https://host:ponVibm/console/ncp_topoviz/NetworkView.do?id=10690
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 26
7/31/2019 000-565 (2)
26/50
Answer: D
Explanation:
Topic 2, Volume B
QUESTION NO: 62
Which configuration file holds authentication mode for the OQL Service Provider?
A. Configltnm.cfg
B. CtrlSchema.cfg
C. AuthScherna.cfg
D. ConfigSchema.cfg
Answer: D
Explanation:
QUESTION NO: 63
What is the recommended number of domains for a network with 400,000 entities?
A. 1
B. 2
C. 3
D. 4
Answer: B
Explanation:
QUESTION NO: 64
Which two polling methods can be used for Active Polling in IBM Tivoli Network Manager IP
Edition V3.9 (ITNM)? (Choose two.)
A. ICMP Polling
B. SNMP Polling
C. Adaptive Polling
D. SNMP Trap Reception
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 27
7/31/2019 000-565 (2)
27/50
E. CLI-based Demand/Response Polling
Answer: A,B
Explanation:
QUESTION NO: 65
In IBM Tivoli Network Manager IP Edition V3.9 (ITNM), which statement is true in NAT Discovery?
A. ITNM discovers the NAT gateways before discovering the rest of the network.
B. Discovery process must discover the NAT environment from inside (private network).
C. Devices within a NAT domain that have only private IP addresses can be discovered or
managed
D. ITNM can discover the NAT domains and the rest of the network simultaneously during
discovery.
Answer: A
Explanation:
QUESTION NO: 66
Which default directory contains icon images for a device class?
A./opt/IBM/tivoli/netcool/precision
B./opt/IBM/tivoli/tip/profiles/TIPProfile/etc/tnm/resource
C./opt/IBM/tivoli/tipv2/profiles/nPProfile/etc/tnm/resource
D./opt/IBM/tivoli/netcool/precision/prof iles/TIPProfile/etc/tnm/resource/
Answer: D
Explanation:
QUESTION NO: 67
IBM Tivoli Network Manager IP Edition V3.9 (ITNM) events from IBM Tivoli Netcool/OMNIbus are
not showing up in the topology views in ITNM. What can be done to determine the source of the
problem?
A. check that nco_g_event_trace.domain has entries
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 28
7/31/2019 000-565 (2)
28/50
B. check that nco_poller is configured to send events
C. increase the log level for nco_p_ncpmonitor and ncp_g_event to level 4
D. increase the log level for ncp_p_ncomonitor and ncp_g_event to level 4
Answer: C
Explanation:
QUESTION NO: 68
A company is experiencing problems accessing their remote topology database. What could they
do to see if the core components still have access to the NCIM database and determine the cause
of the problem?
A. use the script $NCHOME/precision/perl/scripts/ncp_db_access.pl to check the communications
and access to the databases
B. access the $NCHOME/etc/precision/DbLogins.cfg file and change the value for m_LogLevel to
DEBUG for the problem database
C. access the $NCHOME/etc/precision/ncimLogin.cfg file and change the value for
m_ChckConnect to true for the problem database
D. log in to the IBM Tivoli Integrated Portal and test the database connections under
Administration > Database Access > Configuration
Answer: AExplanation:
QUESTION NO: 69
Which action is required for the ncp_virtualdomain service to use a specific port?
A. The ServiceData.cfg file must be altered to use DYNAMICNO.
B. The ConfigltnmData.cfg file must be altered to use DYNAMICNO.
C. The CtrlServices.cfg file must have a value set in the StaticPort field.
D. The ConfigltnmData.cfg file must have a value set in the StaticPort field.
Answer: A
Explanation:
QUESTION NO: 70
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 29
7/31/2019 000-565 (2)
29/50
Which action is required for a customer to use a custom ObjectServer field in the topology lookup
and Root Cause Analysis (RCA) calculations?
A. modilythe ncmonitor.activeEvent table to include the custom ObjectServer field
B. edit the EventGatewaySchema.cfg file to add the new field to the nco2ncp section
C. register the ObjectServer alerts.status field with the RCA plug-in using the ncp_gwplugins.pl
scriptD. no action is necessary - all ObjectServer alerts.status fields are passed to the EventGateway
and plug-ins
Answer: B
Explanation:
QUESTION NO: 71
Which two factors require the Custom installation method rather than the Basic installation
method? (Choose two.)
A. There is a fail-over requirement
B. The database for topology data is IDS.
C. The database for topology data is IBM DB2.
D. There is a requirement to install as a non-root user.
E. The installation uses existing Tivoli Netcool/OMNIbus.
Answer: C,E
Explanation:
QUESTION NO: 72
How is IBM Tivoli Network Manager IP Edition V3.9 (ITNM) completely uninstalled on a Windows
server?
A. remove the files and directories
B. uninstall the Deployment Engine
C. runthescriptUninstall_ITNM.exe
D. runthescriptlnstall.exe -uninstall
Answer: CExplanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 30
7/31/2019 000-565 (2)
30/50
QUESTION NO: 73
In IBM Tivoli Network Manager IP Edition V3.9 for domain NCOMS, the new scope additions are
not reflecting in Discovery Configuration graphical user interface or in DiscoScope.NCOMS.cfg.
Which log must be verified to determine the possible cause?
A. $NCHOME/log/precision/ncp_disco.NCOMS.Iog
B. $ITNMHOME/profiles/TIPProfile/logs/tnm/ncp_disco.0.log
C. $ITNMHOME/profiles/TIPProfile/logs/tnm/ncp_topoviz.0.log
D. $ITNMHOME/profilesTIPProfile/logs/tnm/ncp_guiconfig.0.log
Answer: D
Explanation:
QUESTION NO: 74
Within the pre-discovery fitter builder, what is the correct syntax to filter out devices without SNMP
access?
A. m_HaveAccess = 0B. m_HaveAccess 0
C. m_HaveAccess is null
D. m_HaveAccess is not null
Answer: B
Explanation:
QUESTION NO: 75
In a two server distributed IBM Tivoli Network Manager IP Edition V3.9 (ITNM) setup, when both
IBM Tivoli Integrated Portal (TIP) and ITNM Core components are deployed on separate servers,
which server has all the MIB modules and ncp_mib binary?
A. TIP server
B. ITNM Core server
C. both TIP and ITNM serversD. ITNM server has ncp_mib binary and all modules are located on the TIP server
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 31
7/31/2019 000-565 (2)
31/50
Answer: A
Explanation:
QUESTION NO: 76
Given command line access to an IBM Tivoli Network Manager IP Edition V3.9 UNIX server,
running which binary ensures the changes made to omni .dat are synchronized to interfaces
?
A. nco_sql
B. ncp_oql
C. ncojgenD. nco dbinit
Answer: C
Explanation:
QUESTION NO: 77
What is the maximum number of OIDs that can be presented in any one MIB browser?
A. 1
B. 2
C. 3
D. 4
Answer: B
Explanation:
QUESTION NO: 78
Which steps add a new node to the ping finder?
A. 1) Navigate to the Scope page within the Network Discovery Configuration pane.
2) Click the icon to add a new scope.
3) Complete the dialog box to add a new range to the scope.
B. 1) Navigate to the Seed page within the Network Discovery Configuration pane.
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 32
7/31/2019 000-565 (2)
32/50
2) In the section for Use File Finder in Discovery, click the icon to add a new seed.
3) Complete the dialog box to add a new file name.
C. 1) Navigate to the Seed page within the Network Discovery Configuration pane.
2) In the section for Use Ping Finder in Discovery, click the icon to add a new seed.
3) Complete the dialog box to add a new IP address.
D. 1) Navigate to the Advanced page within the Network Discovery Configuration pane.
2) In the section for Use Ping Finder in Discovery, click the icon to add a new seed.3) Complete the dialog box to add a new IP address.
Answer: C
Explanation:
QUESTION NO: 79
What is the minimum role the administrator must give an IBM Tivoli Network Manager IP Edition
V3.9 user to copy a view from his/her view collection to a global view?
A. netcool_ro
B. itnmadmin
C. networks ew
D. ncp_networkview
Answer: DExplanation:
QUESTION NO: 80
What does this IBM Tivoli Network Manager IP Edition V3.9 (ITNM) command do: ncp_dh_XML
rpc?
A. It enables ITNM to communicate directly to EMS systems.
B. It enables ITNM to communicate with the collectors using the XML-RPC interface.
C. It retrieves local neighbor and entity and associates address data for each device on the
collector.
D. It reads the collector host seeds from a seed table in the collector Finder database and then
queries the collectors specified in this table to get a list of devices managed by the EMS.
Answer: B
Explanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 33
7/31/2019 000-565 (2)
33/50
QUESTION NO: 81
Before designing the architecture for IBM Tivoli Network Manager IP Edition V3.9 (ITNM), what
are two requirements prior to installation? (Choose two.)
A. configure LDAP settings in Tivoli Integrated Portal
B. configure customized discovery stitchers for enrichmentC. configure the unidirectional OMNIbus to the ITNM gateway
D. designate which type of database will house the NCIM database for ITNM
E. estimate the number of interfaces that will be discovered and managed by ITNM
Answer: D,E
Explanation:
QUESTION NO: 82
A customer has an overlay management network and must discover the target devices through
this network. This is currently seeded with a ping sweep of the network. The devices do not show
these addresses in the standard MIB-II ipAdEntAddr table and the devices are not discovered.
Which action discovers these devices accurately?
A. Use the file finder, listing the management addresses and explicitly adding m_IsOutOfBand to
the column parse rules with a value of 1.
B. Define the overlay network details in scope special and select Allow If In scope.special in the
Advanced Tab of the discovery configuration.
C. Alternative valid addresses must be used when seeding these devices; addresses that do not
appear in ipAdEntAddr are ignored by the AssocAddress agent an IpToBaseName stitcher.
D. Enable the Feedback option in the Advanced Tab of the discovery configuration which allows
the alternative addresses on these devices to be passed back to the seeding process and
bypasses the management network addresses.
Answer: BExplanation:
QUESTION NO: 83
The administrator wants to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM) but has no
X-client on the UNIX system. What should be done?
A. ITNM cannot be deployed without an X-client
B. run the dedicated command line installation script consolejnstall.sh
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 34
7/31/2019 000-565 (2)
34/50
C. run the installation script using the install, sh -i console option
D. deploy ITNM on another sytem, make a tar file of the installation, and copy the tar file across to
the server
Answer: C
Explanation:
QUESTION NO: 84
Which option should be run from the IBM Tivoli Network Manager IP Edition V3.9 server to verify
connectivity to an Oracle NCIM database?
A. ncp_oql
B. ncp_ncim_diff.pl
C. telnet host 3306
D. ncp_db_access.pl
Answer: D
Explanation:
QUESTION NO: 85
What can be run to verify SNMP access to a device from the IBM Tivoli Network Manager IP
Edition V3.9 server?
A. ncpjnib
B. snmp_walk.pl
C. ncp_d_helpserv
D. ManageNode.pl
Answer: B
Explanation:
QUESTION NO: 86
What is the correct syntax for running a silent install with a response file on a Windows server?
A. install.exe -s -f
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 35
7/31/2019 000-565 (2)
35/50
B. install.exe -i silent -f
C. install.exe -i response -f
D. install.exe -i console -s -f
Answer: B
Explanation:
QUESTION NO: 87
Which step is required to add additional discovery information to the Structure browser in IBM
Tivoli Network Manager IP Edition V3.9?
A. It only needs the appropriate necessary inserts in the DbEntityDetails.cfg file.
B. There are no modifications necessary All additional discovery information is automatically
added.
C. This requires a modification of the NCIM schema and will require a reinstallation of the NCIM
database.
D. It is not possible to add additional information gathered during the discovery to the structure
browser as different display fields are all hard coded.
Answer: A
Explanation:
QUESTION NO: 88
What is required to install IBM Tivoli Network Manager IP Edition V3.9 on a Windows Server 2008
system?
A. The user must be the administrator.B. The user must be IBM Tivoli Netcool/OMNIbus.
C. The tipadmin user must be created on the system.
D. The user must be configured in the IBM DB2 NCIM database
Answer: A
Explanation:
QUESTION NO: 89
A new set of ZyXEL devices have been added to the network with OID 1.3.6.1.4.1.890. Which two
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 36
7/31/2019 000-565 (2)
36/50
7/31/2019 000-565 (2)
37/50
7/31/2019 000-565 (2)
38/50
to reduce the NCIM load.
The customer has identified three ObjectServer fields that they would like this data:o be added to
for all suitable events -NmosGeography, NmosCountry, and NmosSite
Example record in Model
Description of the ncim.locations table
The ModelNcimDb configuration has been modified to map:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 39
7/31/2019 000-565 (2)
39/50
Based on the scenario, the location data is held in NCIM at the chassis (EntityType 1) but not
against each interface entity.
If an SNMP linkDown trap was received by the ObjectServer, could it be enriched with the location
data held on the chassis?
A. No. An interface event cannot be related to the parent chassis by the gateway
B. Yes. Interface events can be enriched with chassis level data by the EventGateway
C. No. The data would need to be held at both the interface and chassis level to allow this
enrichment
D. Yes. But only if the event is sent across the gateway for further root cause analysis and entityidentification
Answer: B
Explanation:
QUESTION NO: 94
What should an administrator run to deploy IBM Tivoli Network Manager IP Edition V3.9 (ITNM)
using the install wizard on a Windows system?
A. deploy.exe
B. launchpad.exe
C. installwizard.exe
D. launchwizard.exe -I
Answer: BExplanation:
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 40
7/31/2019 000-565 (2)
40/50
QUESTION NO: 95
What is a user restriction when installing IBM Tivoli Network Manager IP Edition V3.9 (ITNM) on
Windows Server 2008?
A. ITNM must be installed as the Administrator user.
B. ITNM cannot be installed as the Administrator user.
C. ITNM must be installed as a non-administrative user.
D. The installation user must belong to the Users group.
Answer: A
Explanation:
QUESTION NO: 96
What should be done to start IBM Tivoli Network Manager IP Edition V3.9 automatically in a
Windows environment?
A. use the ncp_ctri.bat script
B. usethecommanditnm_start.bat -autoC. configure auto-startup of ncp_ctrl in CtrlServices_Domain.cfg
D. change the ncp_ctrl service from manual to automatic
Answer: D
Explanation:
QUESTION NO: 97
By default, which three statements are true about SNMP and Telnet account settings in the
Discovery Configuration window? (Choose three.)
A. SNMP version 3 is required.
B. SSH access can be configured.
C. Expected Telnet prompts can be modified.
D. SNMP strings have to be specified based on IP subnet range.
E. SNMP and Telnet accounts require the Administrator to run ncp_crypt.F. SNMP and Telnet accounts are automatically encrypted into the cfg file.
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 41
7/31/2019 000-565 (2)
41/50
Answer: B,C,F
Explanation:
QUESTION NO: 98
After IBM Tivoli Netcool/OMNIbus, WebGUI, and IBM Tivoli Network Manager IP Edition V3.9
(ITNM) have been installed, the Administrator will have to configure the systems in a hot standby
fail-over environment. The ITNM domains are named ITNM_PRI and ITNM_BAK.
Which three files are required to configure fail-over for WebGUI and ITNM? (Choose three.)
A. server.init
B. wimconfig.xml
C. ServiceData.cfg
D. DbLogins.ITNM_PRI.cfg
E. Configltnm.ITNM_BAK.cfg
F. ncwDataSourceDefinitions.xml
Answer: C,E,F
Explanation:
QUESTION NO: 99
Which step is required for setting up NCIM replication?
A. in CtrlServices.cfg, set the value of ReplicateNcimto 1
B. in Configltnm.cfg.set the value of Is Replicating Ncimto 1
C. in Configltnm.cfg, set both primary and backup to point to the same NCIM
D. in ServiceData.cfg, add a line such as: SERVICE: ncim DOMAIN: VIRTUAL ADDRESS:127.123.209.55 PORT: 1234 SERVERNAME: my host name DYNAMIC: NO
Answer: B
Explanation:
QUESTION NO: 100
IBM Tivoli Network Manager IP Edition V3.9 can create right-click tools from the topology display.
Which two steps need to be taken to enable this functionality? (Choose two.)
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 42
7/31/2019 000-565 (2)
42/50
A. create the CGI script that will launch for the tool
B. create the HTML page for the scripted tool page
C. edit the tool and menu XML configuration files to incorporate the tool
D. determine the users and security context for those who will be using the tool
E. determine which fields from alerts.status will be sent as arguments to the tool
Answer: C,DExplanation:
QUESTION NO: 101
Which stitcher is designated to add in custom entities and connections to the discovered topology?
A. PresetLayer.stch
B. FullDiscovery.stch
C. BuildFinalEntity.stch
D. ModifylPContainment.stch
Answer: A
Explanation:
QUESTION NO: 102
Which action must be taken on the ObjectSetver to allow the IBM Tivoli Network Manager IP
Edition V3.9 Service-affecting Events (SAE) to be raised?
A. ensure the update_service_affecting_events trigger is enabled
B. no action - the ObjectServer is not responsible for managing SAE
C. no action - SAE are raised by the SAE plug-in directly to the ObjectServerD. populate the precision.service_details and precision.entity_service tales with data
Answer: A
Explanation:
QUESTION NO: 103
A discovery has completed successfully but does not contain the IBM Tivoli Network Manager IP
Edition V3.9 (ITNM) server, and the EventGateway has not been configured to use another IP
address. What is the impact on the EventGateway functionality?
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 43
7/31/2019 000-565 (2)
43/50
A. The EventGateway will start but all plug-ins will be disabled.
B. No events will be passed to the root cause analysis (RCA) plug-in.
C. RCA will work for all suppression types except isolated suppression.
D. Standard event enrichment will function for chassis but not interface level entities.
Answer: C
Explanation:
QUESTION NO: 104
Which OQL query determines which devices in a model are Permanently Unmanaged?
A. select from master.entityByName where Extralnfo->m_ManagedStatus =1 and EntityType=1;
B. select * from master.entityByName where Extralnfo->m_ManagedStatus = 2 and EntityType=1;
C. select "from ncim.managedStatus where Extralnfo->m_ManagedStatus NULL and
EntityType=1;
D. select"from scratchTopology.entityByName where Extralnfo->m_ManagedStatus = 2
andEntityType=1;
Answer: B
Explanation:
QUESTION NO: 105
An administrator is adding a new table to hold some customer data in NCIM. Which table does this
additional table need to be linked to (using entityId) to ensure that the data is properly displayed
and managed?
A. EntityB. Chassis
C. Interface
D. Entity Data
Answer: D
Explanation:
QUESTION NO: 106
IBM Tivoli Network Manager IP Edition V3.9 (ITNM) cannot connect to the ObjectServer. Which
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 44
7/31/2019 000-565 (2)
44/50
file contains the connection information for the ObjectServer which ITNM is attempting to connect
to?
A. $NCHOME/etc/omni.dat
B. $NCHOME/etc/precision/NcoConnectionSchema.cfg
C. $NCHOME/etc/omnibus/interfaces. (arch = operating system name)
D. $NCHOME/etc/precision/interfaces (arch = operating system name)
Answer: A
Explanation:
QUESTION NO: 107
A customer uses IBM Tivoli Netcool/lmpact to populate a column named ServiceLevel in the
ObjectServer. This column is populated after some additional operator driven workflow and can
have dynamic values. The customer would like to see the discovered network topology partitioned
using this ServiceLevel column in conjunction with some asset data discovered from the device.
Which action must be taken to allow the ServiceLevel column to be used in the creation of a
Network View?
A. create a new table in NCIM to hold the ServiceLevel data and add the required configuration to
the DbEntityDetails configuration file
B. add the ServiceLevel column name to a dynamic template and add the ServiceLevel column
details to the ncpgui.dynamicView table
C. modify/the ncmonitor activeEvent table to include the ServiceLevel column name and type and
then restart the EventGateway process
D. modify the EventGateway configuration to enable the ServiceLevel column name to be passed
to the plug-ins using the nco2ncp configuration section
Answer: C
Explanation:
QUESTION NO: 108
Which OQL query monitors the current discovery status?
A. select*from disco.status;
B. select*from discovety.status;C. select m_CurrentStatus from disco.status;
D. select m_CurrentStatus from stitchers status;
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 45
7/31/2019 000-565 (2)
45/50
Answer: A
Explanation:
QUESTION NO: 109
What does IBM Tivoli Network Manager IP Edition V3.9 require to connect to an IBM DB2
database?
A. SID, database account name, database account password
B. hostname, port, database name, SID, database account password
C. hostname, port, database name, database account name, database account password
D. hostname, port, database name, server type, database account name, database account
password
Answer: C
Explanation:
QUESTION NO: 110
A new custom field was created in model to accommodate data regarding the building location of adevice. Which table in NCIM should this data go into so that this field may be used to create a
custom view?
A. ncim.entity
B. ncim.extralnfo
C. ncpgui mappings
D. create a custom table specifically for this purpose
Answer: DExplanation:
QUESTION NO: 111
Which discovery phase runs the query of routing tables in the network?
A. Phase-1
B. Phase 1
C. Phase 2
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 46
7/31/2019 000-565 (2)
46/50
D. Phase 3
Answer: B
Explanation:
QUESTION NO: 112
Which option verifies the availability of the seed list in IBM Tivoli Network Manager IP Edition
V3.9?
A. in DiscoConfig.cfg set m_Ping Verification=1 under disco.config
B. in DiscoSchema.cfg set m_PingVerification=1 under disco.config
C. in DiscoConfig.cfg set m_CheckFileFinderReturns=1 under disco.config
D. in DiscoSchema.cfg set m_CheckFileFinderReturns=1 under disco.config
Answer: C
Explanation:
QUESTION NO: 113
When performing a full or partial rediscovery, what does the m_Rebuildl_ayers=1 option do in IBM
Tivoli Network Manager IP Edition V3.9?
A. Disco rebuilds the entire topology on partial discovery cycles.
B. Disco does not build connectivity tables on any discovery cycles.
C. Disco rebuilds topology on partial but not on full discovery cycles.
D. Disco rebuilds the entire topology only on scheduled discovery cycles.
Answer: A
Explanation:
QUESTION NO: 114
During discovery, the AssocAddress receives device information from the Details agent. The
AssocAddress agent then downloads all the IP addresses associated with the device and adds
them to which table?
A. finders.returns
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 47
7/31/2019 000-565 (2)
47/50
B. master.entityByName
C. translations.ipToBaseName
D. scratchTopology.entityByName
Answer: C
Explanation:
QUESTION NO: 115
Click the Exhibit button.
A new poll definition named MyNewPollDefinition is defined and assigned to a new poll policy. Thepolicy has been enabled as MyNewPollPolicy and the poll definition and policy information is in the
exhibit. How can this be interpreted?
A. The poll has failed to execute correctly.
B. The poll has resulted in some events being raised.
C. The policy has no targets within the current topology.
D. The poll is not enabled as indicated by the x cross icon.
Answer: AExplanation:
QUESTION NO: 116
Which EventGateway OQL configuration table controls the mapping of Eventlds to EventMaps?
A. config.defaults
B. config.nco2ncp
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 48
7/31/2019 000-565 (2)
48/50
C. config.eventMaps
D. config.precedence
Answer: D
Explanation:
QUESTION NO: 117
Which command provides the installed version of IBM Tivoli Netcool/OMNIbus?
A. itnm_status nco
B. nco_sql -version
C. nco_objserv -version
D. ncp objserv -version
Answer: C
Explanation:
QUESTION NO: 118
Which data is required for the Collector Finder Seed File? (Choose two.)
A. The name of the collector process.
B. The port on that device on which the collector is listening.
C. The hostname of the device on which the collector is running.
D. The port of the Enterprise Management Server the collector is talking to.
E. The hostname of the Enterprise Management Server the collector is talking to.
Answer: B,C
Explanation:
QUESTION NO: 119
Which default file must be modified for configuring discovery to run every Friday at 1:00 a.m. in the
morning?
A. Feedback.stch
B. FullDiscovery.stch
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 49
7/31/2019 000-565 (2)
49/50
C. FullDiscoveryPending.stch
D. FnderRediscoveryToPingFinder.stch
Answer: B
Explanation:
QUESTION NO: 120
A user is running the ObjectServer in secure mode. Which file must be changed to allow
connections to the ObjectServer by the nco_p_ncpmonitor probe?
A. NcoLogins.cfg
B. NcoGatelnserts.cfg
C. nco_p_ncpmonitor.props
D. EventGatewaySchema.cfg
Answer: C
Explanation:
QUESTION NO: 121
In IBM Tivoli Network Manager IP Edition V3.9 (ITNM), which command increases the trace level
logging dynamically of the ncpjnodel using ncp_oql?
A. It is not possible to change trace level logging with ncp_oql. It is performed only using the -
USR2 signal.
B. ncp_oql -domain NCOMS -service Ctrl -query "update services.inTray set logLevel=4 where
serviceName=ncp_mode1;
C. ncp_oql -domain NCOMS -service Ctrl -query "update services.inTray set traceLevel = 4 whereserviceName = ncp_mode1;
D. ncp_oql -domain NCOMS -service Ctrl -query "update services.inTray set messageLevel = 4
where serviceName = t ncp_mode1;
Answer: C
Explanation:
QUESTION NO: 122
When configuring a new agent definition, what does the command DiscoAddTagsnmpGetNext
IBM 000-565 Exam
"Pass Any Exam. Any Time." - 100% Pass Guarantee 50
7/31/2019 000-565 (2)
50/50
("SubnetworkName") do?
A. It creates a text field under the Extralnfo column which stores the retrieved value for the
SubnetworkName.
B. It creates a list (type text) field under the Extralnfo column which stores the retrieved table
values for the SubnetworkName.
C. It creates an additional text field in the scratchTopology.entityByName which stores theretrieved value for the SubnetworkName.
D. It creates an additional list field (type text) in the scratchTopology.entityByName which stores
the retrieved table values for the SubnetworkName.
Answer: B
IBM 000-565 Exam