Radiator GuardHonda CBR650/CB650

Installation Instructions

Installation Instructions

Kit Contents PRN014416

4 x M4 x 6mm Black Button Heads A

4 x Special Washer B

6 x Rubber Bungs C

10 x Nitrile Rubber Pads D

1Installation Instructions

CCC

C C C

Locate round holesamongst hexagons.

Push Rubber Spacerthrough from the back of the guard

so Hexagonal shapesits on the front face

2Installation Instructions

D D

D

RepeatBoth Sides

3Installation Instructions

RepeatBoth Sides

D

D

4Installation Instructions

5Installation Instructions

6Installation Instructions

BA

7Installation Instructions

8Installation Instructions

9Installation Instructions

BA

Installation Instructions

It is recommended that periodic inspections are made to ensurethat dirt and debris have not become trapped between the guard

and the radiator/oil cooler. Such dirt and debris would reduce the cooling e�ciency of the radiator/oil cooler.

It is recommended that periodic inspections are made to ensure that all �xings are fully tightend.

www.evotech-performance.com