Post on 08-Aug-2018
transcript
8/22/2019 02 the Occupants.
1/18
2D Graphics Exercise 02CT 421 Computer Graphics Application2nd Semester AY
By: Ivy Kim D. Machica, MSIS
8/22/2019 02 the Occupants.
2/18
Contents
A. Overview
B. Starting the Poster
C. The Mysterious HouseD. Lighting up the windows
E. Creating the light beams
F. The EyeG. Adding type
8/22/2019 02 the Occupants.
3/18
A. Overview
Fig1. Finished Product
Fig2. Forest
Fig3. The Eye
Fig4. The House
8/22/2019 02 the Occupants.
4/18
B. Starting the Project
1. Set the ff.:
width to 2816 px,
height to 4200 px,
resolution to 300 px Background to black
2. Rename the
background layer to
background.
Fig5. Document
setup
8/22/2019 02 the Occupants.
5/18
B. Starting the Project
3. Open and place the
forest image to yourdocument. (Movie
Poster2\640388_32065741.jpeg)4. Position the image at the
top. Use the Transform
tool to resize and fit the
entire image at the top.(see Fig6)
5. Rename layer to Forest
Fig6. Forest
8/22/2019 02 the Occupants.
6/18
B. Starting the Project
6. Click the create new filland adjustment layerwhile holding the ALTkey and select Levelsand check the UsePrevious Layer to CreateClipping Mask. (Fig.7)
7. Move the middle sliderto the right or set the
value to 0.48 (Fig.8)
8. Add layer mask to forestand remove the grass.(Fig10)
Fig7. Rename Layer
Fig8. Set the levels
Fig9. After adjusting the level
Fig10. After removing the grass
8/22/2019 02 the Occupants.
7/18
B. Starting the Project
9. Click the top layer10. Open and place the image
house on the bottom ofyour document.(703916_73558928.jpeg)
11. Place the new layer on topand rename to House
12. Use the Pen tool andmake paths around thehouse.
13. Right click inside the pathand choose makeselection. Press ok
Fig11. Make sure the path isselected
Fig12. House with pathselection
8/22/2019 02 the Occupants.
8/18
C. The Mysterious House
14. Add layer mask
15. Click the House Filterand Click Filter / Other
/ Minimum and setRadius to 4.
16. Click on the HouseMask, then Click
Image \ Adjustments \Brightness andContrast
Fig13. House after
masking
Fig13. Filter Menu
8/22/2019 02 the Occupants.
9/18
C. The Mysterious House
17. Hold the ALT key and
press the House Mask
18. Click on the House
Layer.19. Hold the ALT key and
select the
Adjustment Icon and
select Levels
20. Set the Output Level
to 103
8/22/2019 02 the Occupants.
10/18
D. Light Beams
21. Add new layer namedWindows
22. Select the PolygonalLasso Tool
23. Choose color Yellow onthe foreground
24. Click Edit and chooseFill
25. Choose Foregroundcolor and click Ok
26. Click Select and chooseDeselect
8/22/2019 02 the Occupants.
11/18
D. Light Beams
27. Make a new layer namedBeam1
28. Click Polygonal LassoTool and draw a lightbeam.
29. Click the Foregroundand switch to orange
30. Choose the Paint BucketTool and fill the beam.
31. Set the Opacity to 20%
8/22/2019 02 the Occupants.
12/18
D. Light Beams
32. Add a new layers namedBeam2 and Beam3(Opacity 22%) and followsteps 28 to 31.
33. Hold the SHIFT key andselect the Beam1 toBeam3
34. Select New Group From
Layers and Rename asBeam Group
35. Add a New layer maskon the Beam Group
36. Select the Gradient Tool
8/22/2019 02 the Occupants.
13/18
D. Light Beams37. Set the Foreground
color to black.
38. Select the Foreground toTransparent and drawthe a horizontal line on
the light beam39. Select Beam3, click on
the Filter menu andselect Blur and choose
Gaussian Blur40. Select Beam2 and choose
Gaussian Blur
41. Select Beam1 and choose
Gaussian Blur
8/22/2019 02 the Occupants.
14/18
D. Light Beams
42. Add a new layer namedGrass Light
43. Select the Paint Brushand draw a curved linebelow the beam.
44. Set the Opacity to 26%
45. Click the Filter menuand set Gaussian Filterto 46.5
8/22/2019 02 the Occupants.
15/18
F. The Eye
46. Open and place The Eyeto your document.
47. Add Layer Mask
48. Remove the sides49. Add an Adjustment
Layer (hold the ALT key)and set the output level to191
50. Select Adjustment layerand choose Photo Filter.
51. Choose Color Orangeand set Density to 75%.
8/22/2019 02 the Occupants.
16/18
F. The Texts
52. Change Foreground
color to white
53. Use Baskerville Old
Face and for the Creditblock, use NiagaraSolid
8/22/2019 02 the Occupants.
17/18
Activity
Create your own Movie Poster. Follow theinstructions. You may use other photos.
8/22/2019 02 the Occupants.
18/18
End of Module 02