Post on 30-Dec-2015
transcript
1
09/2
002
ISO
9001
cert
ified
JOANNEUM RESEARCH
Applied Geophysics
Institute of Applied Geophysics – new Dam Project
2nd IMPACT Project Workshop2nd IMPACT Project Workshop Mo-i-Rana, Norway 12-13th September 2002
presented by: Rainer Morawetz
INSTITUTEof
2
09/2
002
ISO
9001
cert
ified
Overview
Introduction to JOANNEUM RESEARCH and its Institute of Applied Geophysics
New Key-Project – „Dam Investigation Methods and Geotechnical Applications“ Project Description Geophysical Methods Goals Further Work
4
09/2
002
ISO
9001
cert
ified
Background - Company JOANNEUM RESEARCH is Austria’s largest
research organisation owned by a provincial government
Bridge between Research and Application Applied R&D Technology transfer Promotion of future experts and executives
5
09/2
002
ISO
9001
cert
ified
Institute of Applied Geophysics
Background –Institute of Applied Geophysics
Founded 1981 in co-operation with Montan University
Located in Leoben
Highly competent centre for development and application of geophysical methods
Institute offers full spectrum of geophysical methods
Staff: Scientific staff: 11 Technical and administrative staff: 4 Students: 3 .... 4
6
09/2
002
ISO
9001
cert
ified
Institute of Applied Geophysics
Main Research Fields
1. Seismic reflection for rock structure studies and reservoir characterisation
2. Borehole geophysics and petrophysics for complex rock characterisation
3. Geophysical methods for use in geotechnics, risk assessment and archaeology
7
09/2
002
ISO
9001
cert
ified
Institute of Applied Geophysics
Main Research Field 3 – Key Project:
„Development of Dam Investigation Methods and Geotechnical Applications“
Extend the use of geophysical methods in geotechnical fields Focus on development of a method for non-destructive, fast
and effective investigation of dams and embankments
Milestones: Literature Review Test Measurements Systematic Analysis of Methods
8
09/2
002
ISO
9001
cert
ified
Institute of Applied Geophysics
Geophysical Methods Non-destructive
Repeatable
Ground characterisation using physical values
Subsurface structure Subsurface properties
%V
9
09/2
002
ISO
9001
cert
ified
Institute of Applied Geophysics
Geophysical Methods - Dams
In general, better results gained by using a combination of methods
Geophysical Methods -
Dam InvestigationsIn
frar
ed (
A)
Geo
elec
tric
sG
rou
nd
Pen
etra
tin
g R
adar
Mic
ro-s
eism
icB
ore
ho
le m
easu
rem
ents
Gam
ma-
Sp
ectr
osc
op
y (A
)
Layer boundaries (X) X X XCavities X X XSand/Clay X X XSeepage Paths X XWater Saturation X (X) XElectrical Properties X XMonitoring X X X
10
09/
2002
ISO
9001
cert
ified
Institute of Applied Geophysics
Goals Identification and relevant geotechnical
assessment of inhomogeneities using non-destructive techniques
Method for the economic investigation of long lengths of dam (eg. flood defence embankment)
Development of techniques for long-term monitoring
11
09/
2002
ISO
9001
cert
ified
Institute of Applied Geophysics
Further Work Implementation, trial, and refinement within
scope of EU project and with industrial partners (particularly of mobile but economic investigation techniques suitable for long lengths of dam)
Development of techniques to derive absolute geotechnical values (eg. degree of saturation, shear strength…)
12
09/
2002
ISO
9001
cert
ified
JOANNEUM RESEARCH
INSTITUTEofApplied Geophysics
Please talk to me in the breaks!
•your opinion?
•which geotechnical parameters are particularly relevant to dams?
•have you any data/ideas which may help us?