Post on 27-Dec-2015
transcript
1
Cisco Certified Network
Associate
2
COMPANY PROFILE
It have been the first institute for training non technical students set up in 1990.
Jetking has come a long way today with over 100 training centers, 2500 faculty members, international academic partnerships and ISO 9001:2000 certification since 2003
3
NETWORK A computer network is a group
of interconnected computers TYPES OF NETWORK Personal area
network(PAN) Local area network(LAN) Campus area
network(CAN) Metropolitan area
network(MAN) Wide area network(WAN)
4
NETWORK TOPOLOGIES
BUS TOPOLOGY STAR TOPOLOGY
RING TOPOLOGY MESH TOPOLOGY
5
NETWORK DEVICES Lan card:- The network interface card(NIC)
used as interface between the device and the network.
It has Buffer memory. Memory of LAN card is 1024 byte. Lan card is used for both
transmission and receiving of data MAC address is physical or
hardware address. Size of MAC address is 48 bit
RJ-45
6
Hub Hub is a layer 1physical layer
device. Hub provides data transfer rate
(D.T.R)= 10 mbps maximum. Hub works on half duplex mode Hub is used over a small LAN
network.
7
Switch Switch is a layer 2(data link
layer) device. Switch is a LAN device. Switch understands MAC
address. Switch is used to design a large
and complex network. Switch improves network
performance and speed. Switch works on full duplex
mode i.e both sending and receiving data at the same time.
8
ROUTER It is used for wan connectivity.
Router is a layer-3 (network layer) device.
Routers are used to interconnect different wan sites.
Router is a IP and routing enabled device.
Router only understands logical address i.e IP address.
Router uses a routing table which maintains shortest and best path for each destination.
9
OSI MODEL(Open Systems Interconnection Basic Reference Model )
7) Application : Provides different services to the applications
6) Presentation : Handles the format of different applications and files
5) Session : Responsible to make logical connection b/w application and server
4) Transport : Provides end to end communication control
3) Network : Routes the information in the network
2) Data Link : Provides error control between adjacent nodes
1) Physical : Connects the entity to the transmission media
10
IP ADDRESS An Internet Protocol (IP) address is a numerical identification (
logical address) that is assigned to devices participating in a computer network utilizing the Internet Protocol for communication between its nodes. Although IP addresses are stored as binary numbers, they are often displayed in more human-readable notations, such as 192.168.100.1 (for IPv4), and 2001:db8:0:1234:0:567:1:1 (for IPv6).
IP address was defined as a 32-bit number and this system, now named Internet Protocol Version 4 (IPv4) , a new addressing system (IPv6), using 128 bits for the address An IP address is designed with two parts:-
Network:- net-id host:- host-id
11
Different classes of IP version 4 Class A:- 8 bit for network and 24 bit for host. First block consists of Network bits
from 1-126. Mask value is 255.0.0.0 Class B:- 16 bit for network and 16 bit for host. First block consists of network bits
from 128-191. Mask value is 255.255.0.0 Class C:- 24 bit for network and 8 bit for host. First block consists of network bits
from 192-223. Mask value is 255.255.255.0 Class D:- It is used for video conferencing . First block consists of network bits from
224-239. Class E:- It is used for voice conferencing . First block consists of network bits from
240-254. Special IP(Reserve IP):- 127.0.0.0:- This IP is called loopback or local host IP. It is used for self testing or
trouble shooting. Its command is C:> ping 127.0.0.1 255.255.255.255:- This IP is called Broadcast IP and used in lan broadcasting. 169.254.0.0:- It is called APIPA(automatic private IP address).
12
IP Addressing
13
IP Address Classes
14
NAT(Network Address Translation)STATIC NAT
DYNAMIC NATNAT is a layer 3 protocol and it use to translates public IP into private and private IP into publicPRIVATE IP ADDRESS: -CLASS A-----10.0.0.0---------10.255.255.255--------10.0.0.0/8CLASS B-----172.16.0.0------172.31.255.255--------172.16.0.0/12CLASS C-----192.168.0.0----192.168.255.255-------192.168.0.0/16
15
ROUTER FUNDAMENTALS Router memory types Router booting process
and registered numbers Router interface and
ports IOS(internet operating
system) Consol pc
Modes of router:-
User mode
Privilege mode
Global mode
Interface mode
16
Overview of Router Modes
17
Configuring Router Identification
18
Configuring a Router Password
19
Static Route Uses a route that a
network administrator enters into the router manually
Dynamic Route Uses a route that a
network routing protocol adjusts automatically for topology or traffic changes
Identifying Static and Dynamic Routes
20
Static Routes
21
22
23
Project code Mumbai>enable Mumbai#configure terminal Mumbai(config)#Ip route 30.0.0.0
255.255.255.0 20.1.1.2 Mumbai(config)#Ip route 20.1.1.4
255.255.255.252 20.1.1.2 Mumbai(config)#Ip route 40.0.0.0
255.255.255.0 20.1.1.2 Mumbai(config)#Ip route 50.0.0.0
255.255.255.0 20.1.1.2 Mumbai(config)# exit Mumbai#
Banglore>enable Banglore# configture terminal Banglore(config)#ip address 40.0.0.0
255.255.255.0 20.1.1.9 Banglore(config)#ip address 20.1.1.4
255.255.255.252 20.1.1.9 Banglore(config)#ip address 30.0.0.0
255.255.255.0 20.1.1.9 Banlore(config)#ip address 20.1.1.0
255.255.255.252 20.1.1.9 Banglore(config)#ip address 10.0.0.0
255.255.255.0 20.1.1.9 Banglore(config)#exit
24
PING Ping is a command used to test the connectivity
and troubleshooting states between the network devices over a network. Its syntax is:-
Router#ping Ip address If the device is connected (!!!!!!) If not connected (…….)
25
26
27
28
29