1. Package Contents 3. Media Converter Chassis 5. Media ...

transcript

1. Package Contents

Before start installing the Converter, verify the package contains the following parts:

● TheMediaConverterChassisx1

● User'sManualx1

● MountingAccessory(for10/19”ChassisShelf)x1

● RubberFeetx4

● ACPowerCordx1

Ifanyofthesearemissingordamaged,pleasecontactyourdealer immediately, if possible, retain the carton includingthe original packing material, and use them against torepacktheproductincasethereisaneedtoreturnittousfor repair.

3. Media Converter Chassis Front Panel

Figure 3-1 & 3-2 & 3-3 shows a front panel of MC-700 /MC-1500/MC-1500R/MC-1500R48.

Figure 3-1 MC-700 Front Panel

Figure 3-2 MC-1500 Front Panel

Figure 3-3 MC-1500R / 1500R48 Front Panel

6. Installing the Media Converter Chassis

6.1 Installing Media Converter Chassis to 10/19-inch Wiring Closet Rack

» Installfourscrewsthroughmountingearsintoeachside.

» Locate Converter Chassis at 10/19-inch mounting railsandscrewupthefrontbrackets.

» Set Main power switch at “OFF” position beforeconnectingthepowercord.

Figure 6-1 InstallingMediaChassisinWiringClosetRails

5. Media Converter Chassis Rear Panel

Figure 5-1 & 5-2 & 5-3 shows a rear panel of MC-700 /MC-1500/MC-1500R/MC-1500R48.

The rear panel of the MC-700 is with one fan, one ON/OFF Switch and a power inlet that accept 100~240V AC,50/60Hzpowerinput.

Figure 5-1 MC-700 Rear Panel

The rear panel of the MC-1500 is with two fans, one ON/OFF Switch and a power inlet that accept 100~240V AC,50/60Hzpowerinput.

Figure 5-2 MC-1500 Rear Panel

2. Product Features

● Highquality10" / 19”Rack-MountableChassisinstallation

● Supports up to seven (7) / fifteen (15) hot-swappablemediaconverters

● One fan brings the air-flow for system cooling, and LEDindicatorsforsystemandfanstatus(MC-700)

● Two fan brings the air-flow for system cooling, and LEDindicatorsforsystemandfanstatus(MC-1500/1500R/1500R48)

● Thepowerslotatrearpanelforredundantpowersupportwith options of 100~240V AC or -48V DC supplies(MC-1500R/1500R48)

● Bay power isolation, ensure each bay is electricallyisolatedfromeachother

● Support multiple converters with 10/100/1000Mbps,copper,Fiber,single/multi-modeST/SC/SFPconnectors

● Reducetheeffortofconvertermaintenanceandmanage-ment,diagnosethestatusatonetime

● Cost-effective,easyinstall

4. LED Indicators

MC-700

Printing LED Status Description

ON Thechassisispowered.

Thechassisisnotpoweredorpowerfailure,iftheACoutletiswith100~240VACvoltage.Pleaseconsultyourlocaldealerifpowerfailure.

ON Thefanisfunctionalok.

Thefanisnotpoweredoritismalfunction.IfthefanLEDremainsoffwhilepowerison.PleaseconsultyourlocaldealertoreplacetheFAN.

MC-1500 Series

Printing LED Status Description

ON Thechassisispowered.

OFFThechassisisnotpoweredorpowerfailure.

FANA/FANB

ON ThefanisfunctionalO.K.

Thefanisnotpoweredoritismalfunction.IfthefanLEDremainsoffwhilepowerison.PleaseconsultyourlocaldealertoreplacetheFAN.

TherearpaneloftheMC-1500R/1500R48.

Figure 5-3 MC-1500R / 1500R48 Rear Panel

1.TheMC-1500Rshippedwithone100~240VACpowersupplymodule(MC-15RPS130).

2.TheMC-1500R48shippedwithoneDC-48Vpowersupplymodule(MC-15RPS48).

PowerNotice

1.Thedeviceisapower-requireddevice,itmeans,itwillnotworktillitispowered.Ifyournetworksshouldactiveallthetime,pleaseconsideruseaproperUPS(UninterruptedPowerSupply)foryourdevice.Itwillpreventyoufromnetworkdatalossornetworkdowntime.

2.Insomearea,installingasurgesuppressiondevicemayalsohelptoprotectyourchassisfrombeingdamagedbyunregulatedsurgeorcurrenttotheconverterorthepoweradapter.

Rack Mount InstructionsA) ElevatedOperating Ambient - If installed in a closed or

multi-unitrackassembly,theoperatingambienttemper-ature of the rack environment may be greater thanroomambient.Therefore, considerationshouldbegivento installing the equipment in an environment compat-ible with the maximum ambient temperature (Tma)specifiedbythemanufacturer.

B) Reduced Air Flow - Installation of the equipment in arackshouldbesuchthattheamountofairflowrequiredforsafeoperationoftheequipmentisnotcompromised.

C)Mechanical Loading -Mounting of the equipment in therack should be such that a hazardous condition is notachievedduetounevenmechanicalloading.

D) Circuit Overloading - Consideration should be given tothe connection of the equipment to the supply circuitandtheeffectthatoverloadingofthecircuitsmighthaveonovercurrentprotectionandsupplywiring.Appropriateconsiderationofequipmentnameplate ratingsshouldbeusedwhenaddressingthisconcern.

E) Reliable Earthing - Reliable earthing of rack-mountedequipment should be maintained. Particular attentionshouldbegiven to supply connectionsother thandirectconnections to the branch circuit (e.g. use of powerstrips)."

- 10 -

- 11 -

- 12 - - 13 - - 14 -

6.2 Installing Converters to the Media Converter Chassis

» TurnofftheConverterChassispower.

» Verify the Media Converter is right for this Chassis andlocate +5VDC power jack on converter back, carefullyslide in and plug to match 10”/19” Chassis slot +5VDC receptacle. Push up the picket fence to lock theconverters.

The slide-in Media Converters and ConverterChassis shouldbe suppliedonly fromPLANET,both Media Converters and Chassis are builttomatcheachotheratdimensions,DCpowerjack,andDCreceptacleandpowersafety.

» Ensurethatthereisnoactivityinthenetwork.

» Connectthemediacablefornetworkconnection.

» Turnonthechassispower,thePowerLED,andbothFANLEDindicatorswilllightup.

7. Product Specifications

MC-700 Converter Chassis Specifications

Dimension217mmx88.5mmx140mm(WxHxD),2Uheight

Converter Slots 7slots

Power Input 100~240VAC,50/60Hz

Power Consumption

40Wattsmaximum/136BTU

Power Output Per Slot

DC Plug Per Slot 2.5mmDCreceptacle

LED Indication 2;Power,FAN

Temperature / Humidity

Operating Environment0~50DegreeC;Humidity:5~90%non-condensingStorage Environment-40~70DegreeC;Humidity:5~90%non-condensing

Emission FCCPart15ClassA,CE

6.3 Converter Check Point

Fiber Port

Attachthefibercable.TheTx,Rxfibercablemustbepairedatbothends.

2.5mmDCReceptacle2.5mm+5Vforeachslot

DCreceptacleis2.5mmwidethatconformstoandmatchestheMediaConverter2.5mmDCjack'scentralpole.Donotinstallanyimproperunit,modeloftheMediaConverter.

TP Port

Attach UTP Cat. 3 or 5 ca-ble to TP port.

For safety reason, it is recommended storingthe AC adapter of the converter in a knownsecuredplace.Formoreaboutconverter,refertotheuserguideoftheconverter.

MC-1500 Converter Chassis Specifications

Dimension440mmx103mmx180mm(WxHxD),2.4Uheight

Power Input 100~240VAC,50/60Hz

Power Consumption

70Wattsmaximum/238BTU

Power Output Per Slot

DC Plug Per Slot 2.5mmDCreceptacle

LED Indication 3;Power1,FANA,FANB

MC-1500R / MC-1500R48 Converter Chassis Specifications

Model MC-1500R MC-1500R48

Dimension440mmx103mmx180mm(WxHxD),2.4Uheight

Power Input100~240VAC,3.3A,50-60Hz

DC-48V,2A,Range:-40V~-60V

Power Consumption

10.7Watts/36BTU(1xpowersupply,notincludeconverters)88.3Watts/301BTU(Fullloading)

5.3Watts/18BTU(1xpowersupply,notincludeconverters)80Watts/272BTU(Fullloading)

Power Output Per Slot Eachslot5V 1A

DC Plug Per Slot

2.5mmDCreceptacle

LED Indication 4;Power1,Power2,FANA,FANB

8. Customer Support

Thank you for purchase PLANET products. You can browseour online FAQ resource at the PLANET Web site first tocheck if it couldsolveyou issue. Ifyouneedmoresupportinformation,pleasecontactPLANETMediaConvertersupportteam.

PLANETonlineFAQ:

http://www.planet.com.tw/en/support/faq.php?type=3

MediaConvertersupportteammailaddress:

support_converter@planet.com.tw

Contents subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

1. Package Contents 3. Media Converter Chassis 5. Media ...

Documents