BIODEXBiodex Medical Systems, Inc.

20 Ramsey Road, Shirley, New York, 11967-4704, Tel: 800-224-6339 (Int’l 631-924-9000), Fax: 631-924-9241, Email: info@biodex.com, www.biodex.com

ATOMLAB 960 SOFTWARE UPGRADE v1.0.66.0 INSTRUCTIONS MANUAL 187-600 187-601

FN: 13-149 Rev A 5/13

2 Biodex Medical Systems, Inc. © 2013

This manual covers download and installation procedures for the following software: Atomlab™ 960 Updater Program This software can be used with the following products: 187-600 Atomlab 960™ Thyroid Uptake System 187-601 Atomlab 960™ Thyroid Uptake System

Need Help? Contact Biodex Software Support 1-800-224-6339 ext 2803 or softwaresupport@biodex.com

SOFTWARE UPGRADE V2.02 3

Download Instruction – Software On the Biodex website, Nuclear Medicine section, navigate to the ‘Software Downloads’ page under ‘Products’ in the left navigation bar, and select Atomlab 960 Software Upgrade v1.0.66.0 See Figure 1 and follow the download instructions below:

Figure 1. Atomlab 960 Software Upgrade v1.0.66.0 Download screen

4 Biodex Medical Systems, Inc. © 2013

How to Download and Prepare the Updater Program

1. Using a PC with internet access, download and save the Updater Program

<Atomlab960Updater.exe> file to the PC. Go to the folder location to where the file was downloaded.

2. Select and right click on the <Atomlab960Updater.exe> file. Select the <Copy> option.

3. Insert a Flash drive into the PC’s USB port. Take note of what drive letter is assigned to it. (In this example we are using the “E” drive.) Go to <Start> <Computer>. Select the USB Flash drive.

4. Right click on the Flash drive and select the <Paste> option. Now the <Atomlab960Updater.exe> file will be on the Flash drive.

SOFTWARE UPGRADE V2.02 5

5. Remove the Flash drive from the PC and go to the Atomlab 960 flat panel PC.

6 Biodex Medical Systems, Inc. © 2013

How to Run the Atomlab 960 Updater Program To run the Atomlab 960 Updater Program, log in using the Biodex username on the Atomlab 960 flat panel PC. If you are currently logged on as another user, log off the system. Log back in as Biodex. TIP: In order to perform this operation, it is best to connect a USB mouse to the panel. The settings, screen and buttons of the Windows Operating System respond better using a mouse rather than using the touch screen. 1. Make sure that no test is currently running on the Atomlab 960 software. Exit out of the

Atomlab Software using (X) from the Home screen.

2. Connect the USB Flash drive to the Atomlab 960 flat panel PC. 3. Go to <Start> <Computer>. Double click on the USB Flash drive. Take note of what drive

letter is assigned to it. (In this example we are using the “E” drive.)

4. Double click on the <Atomlab960Updater.exe> file. A pop-up dialog box titled User Access Control may appear. Click the <Yes> button.

5. Once executed, the following screen will appear (assuming the Atomlab 960 program is not

running in the background). If the program is running, refer to the FAQ section of this document, “Atomlab Software Running in the Background.”

SOFTWARE UPGRADE V2.02 7

6. The Updater Program will search for the Atomlab 960 software and will update the existing

version.

At this stage, it may take a while to start updating the database. The following screen will be displayed once the database update process begins.

8 Biodex Medical Systems, Inc. © 2013

7. Once the program and database are finished updating, Finished will be displayed on the screen. Click <Close> button to close the Updater Program.

8. This completes the Updater Program. Remove the Flash drive. Restart the Atomlab 960

software. NOTE: While running the software updater program, if the user does not see the screen shots provided in this document, they should contact the Biodex Customer Service Department.

SOFTWARE UPGRADE V2.02 9

FAQ: Atomlab Software Running in the Background: If the Atomlab 960 software is running in the background while trying to run Updater, the Updater will display the following message.

Click <Accept> to proceed with updating the Atomlab 960 software. If <Cancel> is chosen, the Updater Program will be aborted.

10 Biodex Medical Systems, Inc. © 2013

Atomlab Updater - Run More Than Once: If the Updater Program and the existing program are the same version, the following message will be displayed.

SOFTWARE UPGRADE V2.02 11

12 Biodex Medical Systems, Inc. © 2013

BIODEXBiodex Medical Systems, Inc.

20 Ramsey Road, Shirley, New York, 11967-4704, Tel: 800-224-6339 (Int’l 631-924-9000), Fax: 631-924-9241, Email: info@biodex.com, www.biodex.com