Post on 08-Jul-2020
transcript
1.800.932.2263 • brick.com • acmetccladding.com
History Table of Contents2
4-5
6-9
10-13
14-17
18-21
22-25
26-27
28
29
30-31
History
Projects
TC Tile
TC Rainscreen Light
TC Rainscreen
TC Sealed
TC Sunshade
Textures, Shapes & Color Options
Glazed, Engobed & Digital Printed Options
Corner Options
Customization
2
Fired clay is in our DNA. And from the day we were founded, architects
have challenged us to extend and adapt this timeless material for use in
their most innovative projects. Acme TC Cladding is the latest chapter of a
collaboration between architect and brickmaker now in its third century.
Like brick, terracotta has roots in antiquity and has evolved into a highly
engineered product. We use modern extrusion techniques to manufacture
large-format panels that can be installed at any height – by themselves
or with other cladding materials. Over the last decade panels have been
installed on 76.4 million square feet of exterior wall in 32 countries.
Acme TC Cladding comes in 28 vibrant, earth-derived colors and 5 distinct
product lines: tile, rainscreen, rainscreen light, sealed, and sunshade.
This beautiful innovation also draws on the expertise of IBP, an Acme
subsidiary, which developed the Fast Track masonry support system.
As with all products offered by Acme, the commitment behind Acme
TC Cladding is more than 125 years old. Our desire and dedication is to
help today’s architects execute their most exciting designs in natural clay
materials that withstand the test of time.
3
Natural Clay
TC Tile
TC Rainscreen Light
TC Rainscreen
TC Sealed
TC Sunshade
5
Acme TC Cladding consists of five product lines: Tile, Rainscreen Light, Rainscreen, Sealed, and Sunshade.
These products have an international pedigree. Over the past decade, extruded terracotta panels have been installed on thousands of buildings around the world. These precision-engineered units offer the traditional benefits of fired clay – beauty, durability, water and fire resistance - yet are light enough to be installed at virtually any height.
TC Rainscreen & TC SunshadeCustom Glazed White Sunshade: 55mm x 220mm x 1800mmRainscreen: 400mm x 1200mm x 30mm
TC Tile
6 TC Tile TC Tile 7
Each TC Tile production run is tailored to the specific color,
shape, and texture characteristics unique to your project.
Profiles, shown to the left, are available with ship-lap and
square edges. The panels can be 6 to 24 inches tall and up to
24 inches long and a maximum of 3 square feet in face area per
code. Ship-lap panels are only available in 12mm thickness.
This product is best suited for walls. Corner edges can be
miter cut at the plant, or metal trim can be used as outside
corner treatments. Custom sizes, shapes, colors, and glazing are
available upon request.
Specifications
Standard Size Thickness Colors Finishes Weight Coursing Installation
12”x 24”16”x 24”18”x 24”
min 6” highmax 24” highmax 24” long
10 mm or12mm
solid panel with grooved
backing
See pages 27-28 for options.
See page 26 for options.
~4 lbs per square foot for 10mm
~5 lbs per square foot for 12mm
No limitations in coursing or
orientation
Adhered or embedded in
precast concrete
6’Vertical Stacked Bond
Vertical RunningBond
HorizontalStacked Bond
Diagonal Running Bond(any orientation)
Horizontal Zipper Bond
Coursing Patterns
No Limitations. Suggested coursing patterns shown.
16”x 24”
12”x 24”
18”x 24”TC Rainscreen Light18in x 36in x 18mm in TumbleweedSmooth Texture
8 TC Tile TC Tile 9
Parapet cap assembly by others
Wall framing per type, size and spacing required
Water resistant barrier
Exterior insulation by others
Drainage mat material by others (can be in front of or behind insulation layer)
Mortar, scratch coat w/ lath embedded
Mortar, bond coat
TC Tile
Weep screed
Flashing by others
Recommended brick ledge (size based on amount of insulation required)
Foundation by others
Panel Manufacturing Tolerances
Linear panels with groove in Nutmeg115mm x 600mm x 15mm
Characteristics
AbsorptionASTM C67-02C7%
Modulus of RuptureASTM E880/C880M-151370 psi
Moisture ExpansionISO 10545-10< 0.02 - 0.03
Freeze & ThawASTM C67Tested to 50 Cycles & Passed
Reaction to FireASTM C67Non flammable
Breaking StrengthASTM E880/C880-15127 lbf
EfflorescenceASTM C67-02CNo efflorescence
Chemical ResistanceASTM C67-02CResistant to low concentrations of acid and alkalis
Wall Assembly
TC Tile
Scratch Coat
Water Resistant Barrier
Metal Lath
Metal or Wood Stud
Sheathing
Bonding Coat
Smooth panels in custom colors300mm x 600mm x 10mm
± 2mm600.000
300m
m
10mm thick
6.500 min.
± 2
mm
± 2
mm
± 2
mm
± 2mm
± 3mm
± 2mm
keyway at back panel surfaceper requirements
2.000
2.00
0 m
ax.
2.00
0 m
ax.
Back of Panel
Front of Panel
keyway at back panel surface
670.820
10x300x600mm
10 TC Rainscreen Light TC Rainscreen Light 11
TC Rainscreen LightEach TC Rainscreen Light panel production run is tailored to
the specific color, shape, and texture characteristics unique to
your project. These panels have a ship-lapped profile, as shown
left, with a minimum height of 6 inches, maximum height
of 24 inches, and maximum length of 4 feet. TC Rainscreen
Light is attached to Fast Track Light. This is the thinner of
the our two open ventilated facade options. TC Rainscreen
Light allows moisture drainage and air flow through the back
of the panels. Refer to page 29 for details on corners and rain
blockers. Panel edges are cut per shop drawings. This product
is best suited for walls and soffits. Custom sizes, shapes, colors,
and glazing are available upon request.
Specifications
Standard Size Thickness Colors Finishes Weight Coursing Installation
12”x 24”12”x 36”16”x 36”18”x 36”
min 6” highmax 24” highmax 4’ long
18mm
panels cored according to production
specifications
See pages 27-28 for options.
See page 26 for options.
~6.4 lbs per square foot
Continuous horizontal,
flexible vertical joint
Attached to Fast Track Light Brackets with clips at each panel corner inserted into
slots at the back of the panel.
12”x 24”
12”x 36”
16”x 36”
18”x 36”
HorizontalStacked Bond
Horizontal Running Bond
Horizontal Zipper Bond
Horizontal Random
Running Bond
6’
Coursing PatternsSuggested coursing patterns shown.
Smooth and Linear panels in Honeycomb
12 TC Rainscreen Light TC Rainscreen Light 13
Parapet cap assembly by others
Fast Track Light end bracket assembly attached to sub frame
Wall framing per type, size and spacing required
Water resistant barrier
Fast Track Light intermediate bracket assembly attached to sub frame
Exterior insulation by others
All fasteners per engineering requirements
Fast Track Light intermediate bracket assembly attached to sub frame
Sub-frame assembly attached to metal studs
TC Rainscreen Light panel
Fast Track Light intermediate bracket assembly attached to sub frame
Sub-frame assembly attached to metal studs
Fast Track Light end bracket assembly attached to sub frame
Recommended brick ledge (size based on amount of insulation required)
Foundation by others
Smooth panel in Linen and Sierra Sands500mm x 1200mm x 18mm
Smooth panel in Desert Stone400mm x 900mm x 18mm Sanded surface panels in Silver Mist
250mm x 18mm
Characteristics
AbsorptionASTM C67-02C0.8 - 3.1%
Modulus of RuptureASTM E880/C880M-153843.5 psi
Moisture ExpansionISO 10545-10< 0.02 - 0.03%
Freeze & ThawASTM C67Tested to 50 Cycles & Passed
Reaction to FireASTM C67Non flammable
Breaking StrengthASTM E880/C880-15903.7 lbf
EfflorescenceASTM C67-02CNo efflorescence
Chemical ResistanceASTM C67-02CResistant to low concentrations of acid and alkalis
Wall Assembly
Exterior Insulation
Fast Track Light Intermediate Bracket
Water Resistant Barrier
TC Rainscreen Light Panel
Sheathing
Fast Track Light Clip Assembly
Panel Manufacturing Tolerances
± 2mm900.000
304.
009
18.000 thick
8.316 thick
36.209
236.225
31.575
10.307 thick
± 3
mm
± 2
mm
± 2
mm
± 2mm
± 3mm
± 2mm
± 2mm
± 2mm
± 2mm
± 1mm
± 1mm
coring and back surface of panel per requirements
2.000
2.00
0 m
ax.
2.00
0 m
ax.
Back of Panel
Front of Panel
bottom lipof paneltop lip
of panel
949.958
the
dept
h at
the
bott
om sh
ipla
p is
to
be
a m
inim
um
1.5m
m d
eepe
r tha
n th
e de
pth
of th
e lip
at
the
top
of th
e pa
nel
18x300x900mm
14 TC Rainscreen TC Rainscreen 15
TC Rainscreen Each TC Rainscreen panel production run is tailored to the
specific color, shape, and texture characteristics unique to
your project. These panels have a ship-lapped profile, shown
left, with a minimum height of 6 inches, maximum height
of 24 inches, and maximum length of 5'-6". TC Rainscreen
is attached to Fast Track Bronze. This is an open, ventilated
facade system that allows moisture drainage and air flow at the
back of the panels. Refer to page 29 for details on corners and
rain blockers. These are best suited for walls and soffits. Panel
edges are cut per shop drawings at the plant. Custom sizes,
shapes, colors, and glazing are available upon request.
Specifications
Standard Size Thickness Colors Finishes Weight Coursing Installation
16”x 36”16”x 48”18”x 36”
min 6” highmax 24” high
max 5’-6" long
30mm
panels cored according to production
specifications
See pages 27-28 for options.
See page 26 for options.
~8.4 lbs per square foot
Continuous horizontal,
flexible vertical joint, vertical orientation
possible with special cut kerfs at panel ends
Panel rests on horizontal Fast Track Bronze brackets & is secured with clips at the
top lip
16”x 36”
18”x 36”
16”x 48”
Coursing Patterns
Vertical Stacked Bond
HorizontalStacked Bond
Horizontal Running Bond
Horizontal Zipper Bond
Horizontal Random
Running Bond
6’
Suggested coursing patterns shown.
Smooth panel in Colonial Maple
16 TC Rainscreen TC Rainscreen 17
Parapet cap assembly by others
Fast Track Bronze top receiver bracket assembly attached to sub frame
Wall framing per type, size and spacing required
Water resistant barrier
Exterior insulation by others
All fasteners per engineering requirements
Fast Track Bronze intermediate bracket assembly attached to sub frame
TC Rainscreen panel
Sub frame attached to stand-off
TC Rainscreen panel
Fast Track Bronze starter bracket assembly attached to sub frame
Recommended brick ledge (size based on amount of insulation required)
Foundation by others
Smooth and Linear textures in Colonial Maple410mm x 30mm, 35mm, 80mm
TC Rainscreen 17
Characteristics
AbsorptionASTM C67-02C2.6 - 4.7%
Modulus of RuptureASTM E880/C880M-151838 -1874 psi
Moisture ExpansionISO 10545-10< 0.06 %
Freeze & ThawASTM C67Tested to 50 Cycles & Passed
Reaction to FireASTM C67Non flammable
Breaking StrengthASTM E880/C880-151180 - 1198 lbf
EfflorescenceASTM C67-02CNo efflorescence
Chemical ResistanceASTM C67-02CResistant to low concentrations of acid and alkalis
Wall Assembly
Exterior Insulation
Fast Track Bronze Intermediate Bracket
Fast Track Bronze Clip
Water Resistant Barrier
TC Rainscreen Panel
Sub Frame
SheathingSmooth panel in Redwood300mm x 900mm x 20mm
Panel Manufacturing Tolerances
± 3mm1200.000
412.
000
392.
000
30.000
10.000
8.500
± 2
mm
± 2
mm
± 2
mm
± 3
mm
± 2mm
± 3mm
± 1.6mm
+ 1
.6m
m/ -
1mm
± 1mm
± 1mm
coring & back of panel surface per requirements
2.000
3.00
0 m
ax.
Back of Panel
Front of Panel
1262.404
30x400x1200mm
2.00
0 m
ax.
'tongue' width
kerf groove width
8.00
0de
pth
ofke
rf gr
oove
18 TC Sealed TC Sealed 19
TC Sealed Each TC Sealed panel production run is tailored to the specific
color, shape, and texture characteristics unique to your project.
These panels have kerfed top and bottom edges, as shown
in the profile to the left. They have a minimum height of 6
inches, a maximum height of 24 inches, and maximum length
of 5'-6". TC Sealed is attached to Fast Track Silver. This is a
sealed facade system with backer rod and sealant installed at
all joints. It is best suited for walls and soffits. We recommend
polyurethane or silicone sealant for sealing all joints. Panel
edges can be cut per shop drawings at the plant. See page 29
for corner details. Custom colors, glazing, and engobe glazing
are available upon request.
Specifications
Standard Size Thickness Colors Finishes Weight Coursing Installation
16”x 36”16”x 48”18”x 36”
min 6” highmax 24” high
max 5’-6" long
31.75mm
panels cored according to production
specifications
See pages 27-28
for options.
See page 26
for options.
~9 lbs per square foot
Continuous horizontal,
flexible vertical joint, vertical orientation
possible with special cut kerfs at panel ends
Panel rests on horizontal Fast
Track Silver brackets & is secured with clips at the
top lip
6’16”x 36”
18”x 36”
16”x 48”
Vertical Stacked
Bond
HorizontalStacked Bond
Horizontal Running Bond
Horizontal Zipper Bond
Horizontal Random
Running Bond
Coursing PatternsSuggested coursing patterns shown.
Smooth panels in Sandstone450mm x 900mm x 31.75mm
20 TC Sealed TC Sealed 21
Parapet cap assembly by others
Fast Track Silver top receiver bracket assembly attached to sub frame
Wall framing per type, size and spacing required
Water resistant barrier
Exterior insulation by others
All fasteners per engineering requirements
Sub frame assembly attached to metal studs
Fast Track Silver intermediate bracket assembly attached to sub frame
TC Sealed panel
TC Sealed panel
Sub frame assembly attached to metal studs
Fast Track Silver starter bracket assembly attached to sub frame
Recommended brick ledge (size based on amount of insulation required)
Foundation by others
Wood Grain surfaces and Smooth panels in Linen150, 250, 350, 400mm x 900mm x 18mm
Characteristics
AbsorptionASTM C67-02C4.7%
Modulus of RuptureASTM E880/C880M-151838 - 1974 psi
Moisture ExpansionISO 10545-10< 0.06%
Freeze & ThawASTM C67Tested to 50 Cycles & Passed
Reaction to FireASTM C67Non flammable
Breaking StrengthASTM E880/C880-151180 - 1198 lbf
EfflorescenceASTM C67-02CNo efflorescence
Chemical ResistanceASTM C67-02CResistant to low concentrations of acid and alkalis
Wall Assembly
Exterior Insulation
Metal or Wood Stud
Sub Frame
Water Resistant Barrier
TC Sealed Panel
Sheathing
Fast Track Silver Clip
Fast Track Silver Intermediate Bracket
Panel Manufacturing Tolerances
± 3mm1200.000
31.750
6.349
15.875
± 1
.5m
m
± 2
mm
± 3
mm
± 2mm
± 3mm
± 1.5mm
± 1
.5m
m
± 1mm
± 1mm
coring & back of panel surface per requirements
2.000
3.00
0 m
ax.
Back of Panel
Front of Panel
1263.926
32x400x1200mm
2.00
0 m
ax.
groove width
back of panel to
centerline of kerf groove
14.2
88de
pth
ofke
rf gr
oove
(= 47.25in panel length in US system)
396.
875
(= 1
5.62
5in
mod
ular
pan
el h
eigh
t in
US sy
stem
)
22 TC Sunshade TC Sunshade 23
TC SunshadeEach TC Sunshade baguette production run is
tailored to the specific color, shape and texture characteristics
unique to your project. We offer four standard profiles, shown
to the left. They are fin, 2"x 6" rectangle, 2"x 4" rectangle, and
square. TC Sunshade baguettes come in a standard length of
5 feet with shorter lengths formed or cut to length according
to project needs. These units can be installed in a horizontal
or vertical orientation. Units can have various attachment
methods based on design, orientation, and location. Baguettes
are used in various applications, including as awnings over
windows, parking garage screens, or mechanical equipment
screens. Custom colors, glazing and engobe glazing are
available upon request.
Specifications
Standard Shapes Colors Finishes Weight Coursing Installation
2”x 7” fin See pages 27-28 for options.
See page 26
for options.
5.8 lbs/linear ft Can be installed horizontally,
vertically, or in other
orientations
Varies.Typically interior
support tube attached to wall hanger or angle clips attached to
a sub frame.
2”x 6” rectangle 5.33 lbs/linear ft
2”x 4” rectangle 4.5 lbs/linear ft
2”x 2” square 2.25 lbs/linear ft
6’
5’
Smooth Sunshade in Copperstone50mm x 150mm x 1200mm
24 TC Sunshade
AbsorptionASTM C67-02C3.3 - 5.6%
Modulus of RuptureASTM E880/C880M-151305 psi
Moisture ExpansionISO 10545-10< 0.06%
Freeze & ThawASTM C67Tested to 50 Cycles & Passed
Reaction to FireASTM C67Non flammable
Breaking StrengthASTM E880/C880-155230 lbf
EfflorescenceASTM C67-02CNo efflorescence
Chemical Resistance
Characteristics
TC Sunshade 25
Sub Frame
2”x 2” Square TC Sunshade
Wall Bracket
Interior Support Tube
ASTM C67-02CResistant to low concentrations of acid and alkalis
Smooth panels and sunshade in Copperstone50mm x 150mm x 1200mm
Attachment Assembly
Panel Manufacturing Tolerances
± 3mm1200.000
± 2
mm
50x50x1200mm
2.00
0 m
ax.
(= 47.25in baguette length in US system)
50.000
±2m
m
± 2mm
± 1
mm
± 2mm
2.000
10.0
00
50.0
00
All Profiles of Baguette
center core of baguette to allow 28mm x 28mm metal tube to be passed unimpeded through it
Color Options
Acme TC Cladding comes in a wide palette of standard colors. Custom colors, textures, glazing and engobing are available upon request.
Blue Manor 999
Gauntlet Gray 883
Pewter 884
Sierra Sands 886
Sable 889
Dragon Glass 899
Tumbleweed 003
Linen 001
Desert Stone 002
Silver Mist 880
Coastal Jetty 994
Stirling 996
Patagonia 011
Sandstone 230
Honeycomb 232
Amber Sky 235
Spicewood 236
Papaya 238
Redwood 639
Nutmeg 770
Coffee 773
Mahogany 777
Chocolate 789
Pumpkin Cider 630
Colonial Maple 632
Terra Cotta 633
Copperstone 635
Black Cherry 692
There is a variety of shapes to suit any look; perfect for a pop of pattern and bold designs. Shapes can align with facade elements or continue the eye along TC Sunshade lines. Custom shapes are available upon request. All panels are produced in metric sizes.
Shapes
Texture Options
Smooth Sanded Corrugated Grooved Linear
Acme TC Cladding comes in five standard textures, with many subtypes. Custom textures are available.
26 Textures & Shapes Colors 27
Standard
Half Grooved
Combed
Double Groove
Scalloped
Convex
Beveled
Ribbed
Flange
$$
$
$
$
$$
$$
Printed colors are representative only.
Glazed Panels
Glaze & Engobe
Glazed Acme TC Cladding produces vivid colors with a glassy surface like most ceramics. All standard colors can be manufactured with a shiny engobe finish, while enhancing the character of the terracotta. Custom colors also available.
Digital Surfaces
Corners
Rain Blockers
Terracotta corner treatments should not be overlooked. Corners can be incorporated in any design style. These options are a separate attachment from Fast Track and are based on the panel type. We offer metal trim. Mitered corners are cut at the factory. Special shape terracotta corners blend seamlessly with panels and use a separate attachment system.
Rain blockers are typically installed at vertical joints for TC Rainscreen and TC Rainscreen Light. The zinc aluminum metal rain blocker is typically installed at all the vertical joints between panels. The standard option is powder coated in black. However it can be powder coated in other options as specified. The EPDM rain blocker is installed at mitered outside corners. Rain blockers are optional for interior installations.
Metal Post 1 Corner Option
Metal Post 2 Corner Option
TC Special Shape Corner Option
TC Panel Mitered Corner Option
28 29
White 012 Peach 251 Mustard 252 Orange 256 Vermilion 258
Sky Blue 962 Gray Blue 963 Denim 892 Blue 895 Indigo 898
Moss 952 Kelly 956 Forest 959 Dark Aqua 965 Mallard 968
Ash 217 Red Oak 618Alder 617 Mesquite 627
Walnut 625Pecan 626Royal Rosa 550 Cedar 717
Cashmere Gold 252
Lancaster 258 Southern Gray 725 Amaretto 727Ivory Brown 255
Portabello 256 Shoreline 258 Cinnamon 259 Desert Green 552 Desert Brown 554
Aspen White 008 Graphite 009 Dakota 820 Blue Pearl 826
Achieving amazing replication of natural materials, like marble, wood and stone, is possible through digital inkjet printing on smooth 12mm TC Cladding panels. This technology is proven and has been used on floor tile for decades. Custom printed surfaces are available.
Mitered Corner smooth panels in Sierra Sands and Sable250mm x 1200mm x 18mm
Special Shapes
EPDM Rain blocker(for mitered corners)
Aluminum Rain blocker(for vertical joints)
30
Customization
Combining color and texture are the basics of design, but when you consider the full scope of TC Cladding you realize it’s true custom potential.
Right: The smooth shapes and colors of TC Sunshade create the illusion of color
blocking a on the facade of this parking garage, while
allowing ventilation and screening for automobiles.
Below: TC Tile and inkjet printed wood grain surfaces.
Left: Combining colors can make an eye catching detail.
Right: Etching into solid panels can be done in any design.
31
Top: Combine sunshade and panels for a dramatic look.
Above: Subtle flower etched into white panels.
Left: Many other TC Sunshade profiles available upon request.
Etched TC Rainscreen Light panel in Linen450mm x 1000mm x 18mm
TC Sunshade
TC Sunshade40mm x 180mm x 900mm
TC Rainscreen Light150mm, 250mm, 350mm, 400mm x 1000mm x 18mm
P.O. Box 425, Fort Worth, TX 76101phone 1.800.932.2263 • fax 1.817.332.1406
email tccladding@brick.com acmetccladding.com • brick.com
01/17/2019