18A Universal joint18B Shaft link18C Left Track rod

18D Right Track rod

18E Rubber bellows ( x2 )

18F Link arms ( x2 )18G Anti-roll bar

18H Clip ( x4 )

18I Clamp ( x2 )

18J Clamp ( x2 )AM M1.7 x 3 mm (x10 ) CM M1.7 x 4 mm (x3 ) BM M2.0 x 4 mm (x5 ) JM M2.0 x 4 x 5 mm (x5 )

DP M1.7 x 3 mm (x3 )

1

2

Fit two 18F Link arms to 18G anti-roll bar and fix with

two DP screws .

Attach 18G Anti-roll bar to 16B Subframe with two

18I Clamps and fix each clamp with two AM screws .

3

Fit two 18J Clamps to 16B Subframe and fix with two

BM screws .

4

Fit 18A Universal joint to 18B Shaft link and fix with

two AM screws .

Fit 18A Universal joint to 17G Intermediate shaft and

fix with two AM screws .

5

Fit two 18E Rubber bellows to 18C Left and 18D Right

Track rods . Fit 18C Left and 18D Right Track rods to 17A

Steering rack ends and fix with two CM screws .

Slide two 18E Rubber bellows to cover 17A Steering rack

end joints .

6

18E Rubber bellows fit home .

Fit 12A and 14A Hub carriers to 18C Left and 18D Right

Track rod ends and fix with two JM screws .

7

Fit 17B Steering column to 16B Subframe and fix with

two BM screws . At the same time , guide two 18F Link

arms to fit 12F and 14F Front suspension struts .

8

Align 12A Hub carrier to 16C Left trailing link arm and fix

with JM screw . Don’t overtighten , to allow steering function .

Align 14A Hub carrier to 16D Right trailing link arm and fix

with JM screw . Don’t overtighten , to allow steering function .

9

Secure 18F Link arm top end to 12F Front suspension

strut with 18H Clip .

Secure 18F Link arm top end to 14F Front suspension

strut with 18H Clip .

10

Final views .

11

Assembly drawings .

12