Post on 08-Mar-2016
description
transcript
WHEEL SETWHEEL SET
MTB-DISCDOWNHILL & FREERIDEALL MOUNTAINALL MOUNTAIN, BURNISHED BALL BEARINGSCROSS COUNTRY
MTBNON-DISC, ALL MOUNTAINNON-DISC, ALL MOUNTAIN, BURNISHED BALL BEARINGS W/ALLOY EDN CAPSNON-DISC, CROSS COUNTRY
4
8
121516
171819
ROADSTRAIGHT-PULLED SPOKES LACINGSTRAIGHT-PULLED SPOKES LACING, BURNISHED BALL BEARINGS NORMAL FLANGESBURNISHED BALL BEARINGS W/ALLOY END CAPS
CYCLE CROSSCYCLE CROSS
TRACKTRACK FIXED GEAR
TREKKING / CITYDYNAMO SYSTEM
21252628
30
33
36
INDEXINDEX
3
BMXBMX DISC, DIRT-JUMP, SINGLE SPEEDBMX DIRT-JUMP, SINGLE SPEEDBMX DIRT-JUMP, SINGLE SPEED, MINI CASSETTEBMX RACING & TRIAL, SINGLE SPEEDBMX DISC, FLAT LAND FREE-COASTERBMX FLAT LAND FREE-COASTER, SEALED CARTRIDGE BEARINGSBMX FLAT LAND FREE-COASTER, LOOSE BALLS
COASTER BRAKEADULT BEACH CRUISER
OTHERSQRFREEHUB BODY SPARE PARTSEXPLORED SPARE PARTS FOR SERVICE KITREPLACEMENT INSTRUCTION
42444546474849
50
5155565862
YEAR WEEK MODEL NO. NUMBER
PRODUCTION TRACEABILITY ON EACH TAIWAN MADE HUB:
0902-Z54R-100
PATENT NO. TW I252815US 7121394B2DE 202005000114.7NL 1030207CN 201031894YDE 202007005699.0
6
8
MTB-DISCMTB-DISC
QL-DH1F EXCHANGEABLE CONVERTER CAPS Spoke Hole: 14/32, 36Axle Dim.: IDø20*110mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs [TWN brand]Weight: 190g
DOWNHILL & FREERIDE
ID5.2mm32g
ID15mm25g
ID9mm28g
QL-TW1FEXCHANGEABLE CONVERTER CAPS Spoke Hole: 14/32, 36Axle Dim.: IDø20*110mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs [TWN brand]Weight: 190gOption: Non-Disc QL-PE0F
9
Converter axle from ID15 to ID5.2mmMBQXSA5F-BD61A6 (silver) / MBQXSA5F-BD61A7 (black)
QL-DH2F EXCHANGEABLE CONVERTER CAPS Spoke Hole: 14/32, 36 Axle Dim.: IDø20*110mm Axle Material: Al7075-T6 Flange PCD: 58mm Sealed Cartridge Bearings(SB): 2pcs [SKF brand] Weight: 210g
QL-SA5FSpoke Hole: 14/32, 36Axle Dim.: IDø15*100mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs [TWN brand]Weight: 154g
ID9mmID5.2mm ID15mm
10
MTB-DISCMTB-DISC
Spoke Hole: 14/32, 36Axle Dim.: IDø12*150mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 6pcs Weight: 372g Freehub Body: CrMo 6 pawls 6 V-springs, compatible w/Shimano or
Sram 9, 10sp cassetteOptions: IDø12*165mm 6SB : QL-Y16R
IDø12*150mm 6SB, Al7075 Freehub Body for cross-country : QL-YA5R
QL-Y15R
DOWNHILL & FREERIDE
AI spacerLock-ring Flat sprocket Options :13T, 14T, 16T, 18T,(2.3t)
Shim washer 1.0t
ACCESSORIES
Spoke Hole: 14/32, 36Axle Dim.: IDø12*135mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 333g Freehub Body: CrMo 6 pawls 6 V-springs, 1sp cog
QL-YK0R
11
QR
QR
ID5.2mm
ID10mm
QL-Yu3R Spoke Hole: 14/32, 36Axle Dim.: ø15(ID12)*135, 142mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 5pcs Weight: 364gFreehub Body: CrMo 6 pawls 6 V-springs, compatible
w/Shimano or Sram 9, 10sp cassetteOptions: Converter axle from ID12 to ID10 or ID5.2mm,
3 in 1 exchangeable. Al7075 freehub body for cross country :QL-YA3R 297g
12
MTB-DISCMTB-DISC ALL MOUNTAIN
QL-SY2F Spoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 161g
QL-Y12R Spoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 5pcs Weight: 352gFreehub Body: CrMo 6 pawls 6 V-springs, compatible
w/Shimano or Sram 9, 10sp cassetteOptions: If signed the contract with Shimano
for center-lock mount : QL-TC6R4 SB : QL-Y14R
13
AI spacerLock-ring Flat sprocket Options :13T, 14T, 16T, 18T, (3t or 2.3t)
Shim washer 1.0t
ACCESSORIES
QL-YK2R Spoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 341gFreehub Body: CrMo 6 pawls 6 V-springs, 1sp cogOptions: If signed the contract with Shimano
for center-lock mount, QR type : QL-YS2RIf signed the contract with Shimano for center-lock mount, nut type : QL-YS3R
QL-MH1F Spoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 246gOptions: 3/8” solid axle : QL-MH3F
CrMo axle w/internal thread for M6 bolt : QL-MHGFIf signed the contract with Shimano for center-lock mount : QL-TC3F
QL-YK5RSpoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*110*120mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 325g Freehub Body: CrMo 6 pawls 6 V-springs, 1sp cog
14
MTB-DISCMTB-DISC ALL MOUNTAIN
QL-S16FSpoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 217gOption: no CNC disc mount, no cutting out
flanges : QL-S56F
QL-S16RSpoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 401gFreehub Body: CrMo splined type 2 pawls, compatible w/Shimano or Sram 8, 9, 10sp cassetteOption: no CNC disc mount, no cutting out flanges : QL-S56R
lock ring
same as shimano cassette removal tool
rotor
SHIMANO® Center Lock System.
NOTE: KT needs to get license agreement between Shimano &
customer which assign KT is able to manufacture
center- lock system hubs
lock ring
same as shimano cassette removal tool
rotor
SHIMANO® Center Lock System.
NOTE: KT needs to get license agreement between Shimano &
customer which assign KT is able to manufacture
center- lock system hubs
lock ring
same as shimano cassette removal tool
rotor
SHIMANO® Center Lock System.
NOTE: KT needs to get license agreement between Shimano &
customer which assign KT is able to manufacture
center- lock system hubs
lock ring
same as shimano cassette removal tool
rotor
SHIMANO® Center Lock System.
NOTE: KT needs to get license agreement between Shimano &
customer which assign KT is able to manufacture
center- lock system hubs
Shimano or Sram 8, 9, 10spnot convertible with campy cassette
3XSPLINE CASSETTE BODY
Pat.NO.: TW211746 GE 20305039.8US 6,845,569
EASY LOCK SYSTEM
15
ALL MOUNTAIN, BURNISHED BALL BEARINGS
QL-SP6F Spoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: CrMoFlange PCD: 58mmLoose Balls: Burnished balls raceWeight: 202gOptions: 3/8" solid axle : QL-SP1F
Al7075 caps : QL-SS5F no CNC disc mount, no cutting out flanges : QL-SP2F
QL-SJ6R Spoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: CrMoFlange PCD: L: 58 / R: 45mmLoose Balls: Burnished balls race Weight: 425g Freehub Body: CrMo splined type 3 pawls, compatible
w/Shimano or Sram 8, 9, 10sp cassetteOptions: Al7075 caps : QL-SS5R
no CNC disc mount, no cutting outflanges : QL-SP2R
16
MTB-DISCMTB-DISCMTB-DISCMTB-DISC
QL-239FSpoke Hole: 14/32Axle Dim.: ID5.2ø9*100*108mmAxle Material: Al7075-T6Flange PCD: L: 57 / R: 45mmSealed Cartridge Bearings(SB): 3pcsWeight: 147gOption: Shimano center-look : QL-2K9F
QL-239R Spoke Hole: 14/32Axle Dim.: ID5.2ø10*135*145mmAxle Material: Al7075-T6Flange PCD: L: 58 / R: 51mmSealed Cartridge Bearings(SB): 4pcsWeight: 287gFreehub Body: Al7075 3 pawls 1 L-spring, compatible w/Shimano 9, 10sp cassetteOption: Shimano center-look : QL-2K9R
QL-SY2F Spoke Hole: 14/28, 32Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 161g
QL-Y62R Spoke Hole: 14/28, 32Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 295g Freehub Body: Al7075 6 pawls 6 V-springs, compatible w/Shimano or Sram 9, 10sp cassette
CROSS COUNTRY
Shimano or sram 9,10sp
CASSETTE BODY:
Shimano or Sram 8, 9, 10sp
CASSETTE BODY:
17
NON-DISC, ALL MOUNTAIN
QL-C09FSpoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 40mmSealed Cartridge Bearings(SB): 2pcs Weight: 150g
QL-C09RSpoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: Al7075-T6Flange PCD: 45mmSealed Cartridge Bearings(SB): 2pcs Weight: 364gFreehub Body: CrMo splined type 3 pawls, compatible w/Shimano or Sram 8, 9, 10sp cassette
MTBMTB
Shimano or Sram 8, 9, 10spnot convertible with campy cassette
3XSPLINE CASSETTE BODY
MTBMTB
18
NON-DISC, ALL MOUNTAIN, BURNISHED BALL BEARINGS W/ALLOY END CAPS
QL-AS5F Spoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: CrMoFlange PCD: 40mmLoose Balls: Burnished balls raceWeight: 167gOption: Rubber seal caps : QL-A05F
QL-AS5R Spoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: CrMoFlange PCD: 45mmLoose Balls: Burnished balls race Weight: 406gFreehub Body: CrMo splined type 3 pawls, compatible w/Shimano or Sram 8, 9, 10sp cassetteOption: Rubber seal caps : QL-A05R
Shimano or Sram 8, 9, 10spnot convertible with campy cassette
3XSPLINE CASSETTE BODY
19
NON-DISC, CROSS COUNTRY
QL-C09F Spoke Hole: 14/32, 36Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 40mmSealed Cartridge Bearings(SB): 2pcs Weight: 150g
QL-ZL0RSpoke Hole: 14/32, 36Axle Dim.: ø10(ID5.2)*135*145mmAxle Material: Al7075-T6Flange PCD: L:40 / R:51mmSealed Cartridge Bearings(SB): 4pcs Weight: 260g Freehub Body: Al7075 6 pawls 6 V-springs, compatible w/Shimano or Sram 9, 10sp cassette
Shimano or sram 9,10sp
CASSETTE BODY:
21
QL-ED8F Spoke Hole: 14/16, 20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 33mmSealed Cartridge Bearings(SB): 2pcs Weight: 100g Spokes Lacing: 2.0 or 2.3mm spokes, 20H-2X & 16H-1X
QL-E92R Spoke Hole: 14/20, 24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcs Weight: 271g Freehub Body: Al7075 6 pawls 6 V-springs, compatible
w/Shimano or Sram 9, 10sp cassetteOptions: CrMo cassette body compatible
w/shimano 10sp cassete : QL-E96RAl7075 cassette body compatible w/campy 9, 10, 11sp cassete : QL-E93R
QL-Z88F Spoke Hole: 14/16, 18, 20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 2pcs Weight: 90g
Shimano 9, 10sp SRAM 9,10sp Campy 9,10,11sp
CASSETTE BODY EXCHANGEABLE FOR:
ROAD STRAIGHT-PULLED SPOKES LACING
ROAD
22
STRAIGHT-PULLED SPOKES LACING
QL-Z52F Spoke Hole: 14/16, 20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 2pcs Weight: 113g
QL-Z92R Spoke Hole: 14/20, 24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcs Weight: 271gFreehub Body: Al7075 6 pawls 6 V-springs, compatible
w/Shimano or Sram 9, 10sp cassetteOptions: CrMo cassette body compatible
w/shimano 10sp cassette : QL-Z96RAl7075 cassette body compatible w/campy 9, 10, 11sp cassette : QL-Z93R
QL-Z94R Spoke Hole: 14/24 (L:8 / R:16)Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcs Weight: 279gFreehub Body: Al7075 6 pawls 6 V-springs, compatible w/Shimano or Sram 9, 10sp cassette
Shimano 9, 10sp SRAM 9,10sp Campy 9,10,11sp
CASSETTE BODY EXCHANGEABLE FOR:
23
QL-Z02FSpoke Hole: 14/16, 20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 2pcs Weight: 104g
QL-Z02RSpoke Hole: 14/20, 24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcs Weight: 274gFreehub Body: Al7075 6 pawls 6 V-springs, compatible w/Shimano or Sram 9, 10sp cassette
QL-Z88RSpoke Hole: 14/20, 24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcs Weight: 298gFreehub Body: Al7075 6 pawls 6 V-springs, compatible w/Shimano or Sram 9,10sp cassette
ROAD
24
STRAIGHT-PULLED SPOKES LACING
QL-202F Spoke Hole: 14/20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 2pcsWeight: 101g
QL-202R Spoke Hole: 14/24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcsWeight: 261gFreehub Body: Al7075 3 pawls 1 L-springs, compatible w/Shimano or Sram 9,10sp cassette
QL-GL2FSpoke Hole: 14/20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 2pcs Weight: 139g
QL-GL2R Spoke Hole: 14/20, 24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 4pcs Weight: 264gFreehub Body: Al7075 3 pawls 1 L-springs, compatible w/Shimano or Sram 9,10sp cassette
Shimano or Sram 8, 9, 10sp Campy 9, 10, 11sp
CASSETTE BODY EXCHANGEABLE FOR:
25
STRAIGHT-PULLED SPOKES LACING, BURNISHED BALL BEARINGS
QL-201FSpoke Hole: 14/20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: CrMoLoose Balls: Burnished balls raceWeight: 146g
QL-201RSpoke Hole: 14/24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: CrMoLoose Balls: Burnished balls race Weight: 414gFreehub Body: CrMo splined type 3 pawls, compatible w/Shimano or Sram 9,10sp cassette
QL-GE3RSpoke Hole: 14/24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: CrMoLoose Balls: Burnished balls race Weight: 448gFreehub Body: CrMo splined type 3 pawls, compatible w/Shimano or Sram 9,10sp cassette
Shimano or Sram 8, 9, 10spnot convertible with campy cassette
3XSPLINE CASSETTE BODY
ROAD
26
NORMAL FLANGES
QL-M88FSpoke Hole: 14/20Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 32mmSealed Cartridge Bearings(SB): 2pcs Weight: 83g
QL-ZL4RSpoke Hole: 14/20, 24Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Flange PCD: L:40 / R:51mmSealed Cartridge Bearings(SB): 4pcs Weight: 253gFreehub Body: Al7075 6 pawls 6 V-springs, compatible
w/Shimano or Sram 9, 10sp cassetteOptions: Al7075 cassette body compatible
w/campy 9, 10, 11sp cassette : QL-ZL5R
QL-2G2RSpoke Hole: 14/24Axle Dim.: ø10(ID5.2)*130*140mmFlange PCD: L:40 / R:49Sealed Cartridge Bearings(SB): 4pcsWeight: 253gFreehub Body: Al7075 3 pawls 1 L-spring, compatible
w/Shimano or Sram 9,10sp cassetteOptions: Al7075 cassette body compatible
w/campy 9,10,11sp cassette : QL-2G3RTPI TWN SB, Shimano 9,10sp freehub body : QL-2P2RTPI TWN SB, Campy 11sp freehub body : QL-2P3R
Shimano 9, 10sp SRAM 9,10sp Campy 9,10,11sp
CASSETTE BODY EXCHANGEABLE FOR:
Shimano or Sram 8, 9, 10sp Campy 9, 10, 11sp
CASSETTE BODY EXCHANGEABLE FOR:
27
QL-GP3FSpoke Hole: 14/18, 20, 32Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 40mmSealed Cartridge Bearings(SB): 2pcs (TPI TWN)Weight: 128gOption: BK washers/axle QL-G13F
QL-G02RSpoke Hole: 14/24, 32Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: Al7075-T6Sealed Cartridge Bearings(SB): 2pcs Weight: 352gFreehub Body: CrMo splined type 3 pawls, compatible w/Shimano or Sram 9, 10sp cassetteOption: BK washers/axle QL-G13R
Shimano or Sram 8, 9, 10spnot convertible with campy cassette
3XSPLINE CASSETTE BODY
ROAD
28
BURNISHED BALL BEARINGS W/ALLOY END CAPS
QL-5S3FSpoke Hole: 14/18, 20, 32Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: CrMoFlange PCD: 40mmLoose Balls: Burnished balls raceWeight: 159g Options: Rubber seal caps : QL-5P1F
BK washers, no burnished balls race : QL-553F
QL-GS3RSpoke Hole: 14/24, 32Axle Dim.: ø10(ID5.2)*130*140mmAxle Material: CrMoFlange PCD: 45mmLoose Balls: Burnished balls race Weight: 409gFreehub Body: CrMo splined type 3 pawls, compatible w/Shimano or Sram 8, 9, 10sp cassetteOptions: Rubber seal caps : QL-GT3R
BK washers, no burnished balls race : QL-553R
Shimano or Sram 8, 9, 10spnot convertible with campy cassette
3XSPLINE CASSETTE BODY
30
CYCLE CROSSCYCLE CROSS
QL-SY2FSpoke Hole: 14/28, 32Axle Dim.: ø9(ID5.2)*100*108mmAxle Material: Al7075-T6Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 161g
QL-Y60RSpoke Hole: 14/28,32Axle Dim.: ø10(ID5.2)*130*140mmFlange PCD: 58mmSealed Cartridge Bearings(SB): 4pcsWeight: 295gFreehub Body: Al7075 6 pawls 6 springs, compatible w/Shimano or Sram 9,10sp cassette
Shimano or sram 9,10sp
CASSETTE BODY:
31
QL-230FSpoke Hole: 14/28, 32Axle Dim.: ø9(ID5.2)*100*108mmFlange PCD: L:57 / R:45mmSealed Cartridge Bearings(SB): 3pcsWeight: 147g
QL-230RSpoke Hole: 14/28, 32Axle Dim.: ø10(ID5.2)*130*140mmFlange PCD: L:58 / R:51mmSealed Cartridge Bearings(SB): 4pcsWeight: 286gFreehub Body: Al7075 3 pawls 1 L-spring, compatible w/Shimano or Sram 9,10sp cassette
Shimano or Sram 8, 9, 10sp
CASSETTE BODY:
33
QL-DA6RSpoke Hole: 14/32, 36Axle Dim.: 3/8”*120*165mmFlange PCD: 62.5mmSealed Cartridge Bearings(SB): 2pcsWeight: 395g
QL-DA6FSpoke Hole: 14/32, 36Axle Dim.: 3/8”*100*140mmFlange PCD: 62.5mmSealed Cartridge Bearings(SB): 2pcsWeight: 283g
shim washer 1.0t
lock-ring
14T 33g 15T 40g
16T 48g 17T 46g 18T 66g
TRACK FIXED GEARTRACK
FOR TRACK FIXED GEAR HUBS, INCLUDINGSprocket, lock-ring & shim washer 1tCode no. MCPADF614PC0D (14T)
MCPADF615PC0D (15T)MCPADF616PC0D (16T)MCPADF617PC0D (17T)MCPADF618PC0D (18T)
ACCESSORY
2.7t for 1/8" chain
TRACK
34
TRACK FIXED GEAR
QL-DF6RSpoke Hole: 14/32Axle Dim.: 3/8”*120*165mmAxle Material: CrMoFlange PCD: 62.5mmSealed Cartridge Bearings(SB): 2pcsWeight: 383gFreewheel: L: fixed gear / R: BC1.37*24TCog options: 14, 16, 17, 18TOptions: M10*1.0 solid axle : QL-DQ9R
M10*1.0 hollow axle : QL-DF2R
QL-DF6FSpoke Hole: 14/32Axle Dim.: 3/8”*100*140mmAxle Material: CrMoFlange PCD: 62.5mmSealed Cartridge Bearings(SB): 2pcsWeight: 262gOptions: M9*1.0 solid axle : QL-DQ9F
M9*1.0 hollow axle : QL-DF2F
QL-DF9RSpoke Hole: 14/32Axle Dim.: 3/8”*120*165mmAxle Material: CrMoFlange PCD: 62.5mmSealed Cartridge Bearings(SB): 2pcsWeight: 380g Freewheel: L / R: fixed gearCog options: 14, 16, 17, 18TOption: M10*1.0 solid axle : QL-DQ0R
shim washer 1.0t
cog
lock-ring
FOR TRACK FIXED GEAR HUBS, INCLUDINGSprocket, lock-ring & shim washer 1tCode no. MCPA34A00000D (16T)
MCPA32100000D (14T) MCPA42200000D (17T)MCPA42X00000D (18T)
ACCESSORY
2.7t for 1/8" chain
36
DYNAMO SYSTEMDynamo system designs, manufactures, QC, technical support and patent by SP (Shutter Precision Co., Ltd.)KT Taiwan is Authorized Distributor for SP Dynamo System.
TREKKING / CITY DYNAMO SYSTEM
Ultra Small Dynamo Hub
Our dynamo hubs are not only the lightest, but also the most efficient at converting cyclists’ efforts into electrical energy. The lightest model we have weighs in at an unprecedented 360g while attaining an unmatched efficiency of 72%. These dynamo hubs are premium products designed and engineered for the most demanding cycle tourists, commuters and enthusiasts!
Unique Free Form Optical Dynamo Light
Technical achievements are sometimes not easily expressed but are readily appreciated in use. Our dynamo light boasts innovative optics designed to produce superb lighting performance attaining 35 LUX at 10M. It has StVZO approval.
37
Fish Eye Lens Dynamo Light
Fashion. Simple. Aerodynamic.Up to 35 LUX for brightness. Cut off line on beam profile... Functional performance for safety is our basic design philosophy. Also add design elements on the shape. Stylish & distinctive. Make a difference and make riding better.
38
DYNAMO SYSTEMDynamo system designs, manufactures, QC, technical support and patent by SP (Shutter Precision Co., Ltd.)KT Taiwan is Authorized Distributor for SP Dynamo System.
TREKKING / CITY DYNAMO SYSTEM
Small Dynamo Hub When small is not only small!The S-Series dynamo hubs are not only the smallest physically, but are also the lightest weight on the market at 360g. This model is designed for 20” wheels at a 6V3W rating. It is also ready for use with 700C wheels at 6V2.4W output. Enjoy small and light…
Part No. SV-8 SV-8 (NUT) SV-8 SV-8 (NUT) SD-8 SD-8 (NUT)
Weight 360g 440g 367g 460g 385g 480gAxle Type QR NUT QR NUT QR NUTBrake Type V-Brake V-Brake Disc BrakeSpoke P.C.D 52mm 52mm 52mm & 58mm (Disc side)
Flange Diameter 60mm 60mm 60mm & 66mm (Disc side)
O.L.D 74mm 100mmMax Hub Diameter 58mmSpoke Holes 20H / 24H / 28H / 32HSealed Cartridge Bearing 2pcs
Color JY-001JY-002JY-022JY-004JY-007JY-025 JY-023
39
Part No. PV-8 PV-8 (NUT) PD-8 PD-8 (NUT)
Weight 390g 480g 410g 500gAxle Type QR NUT QR NUTBrake Type V-Brake Disc BrakeSpoke P.C.D 52mm 52mm & 58mm (Disc side)
Flange Diameter 60mm 60mm & 66mm (Disc side)
O.L.D 100mmMax Hub Diameter 58mmSpoke Holes 32H / 36HSealed Cartridge Bearing 2pcs
Color JY-001JY-002JY-022JY-004JY-007JY-025 JY-023
Powerful Dynamo Hub
When powerful is not only powerful!The P-Series dynamo hubs not only provide powerful output, but are also the most efficient on the market attaining 72% at 15km/hr. P-Series dynamo hubs are ideally suited to 26”/ 700C bikes at 6V3W output. They are very light weight beginning from as low as 390g. This is a dream dynamo hub…
BMX
42
BMX DISC, DIRT-JUMP, SINGLE SPEED
AI spacerLock-ring Flat sprocket Options :13T, 14T, 16T, 18T (3t or 2.3t)
Shim washer 1.0t
ACCESSORIES
QL-Y03RSpoke Hole: 14/32Axle Dim.: 3/8”*135*175, 180mmAxle Material: CrMoFlange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 504g Driver: 6 pawls 6 V-springs,
one-piece forged driver (9, 10, 11T 1/8”) RHD
QL-YK1RSpoke Hole: 14/32Axle Dim.: M14(Hollow ID5.2)*135*175, 180mmAxle Material: CrMoFlange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 516g Freehub Body: 6 pawls 6 V-springs,
forged cassette 1sp RHDOptions: 3/8” solid axle : QL-YK6R
M10 hollow axle w/internal thread for M6 bolt : QL-YK7R
QL-Y04RSpoke Hole: 14/32Axle Dim.: M14(hollow ID5.2)*135*175, 180mmAxle Material: CrMoFlange PCD: 58mmSealed Cartridge Bearings(SB): 4pcs Weight: 501g Driver: 6 pawls 6 V-springs,
one-piece forged driver (9, 10, 11T 1/8”) RHD
43
QL-YB6RSpoke Hole: 14/32Axle Dim.: M14*135*175,180mmAxle Material: CrMoFlange PCD: 58mmSealed Cartridge Bearings(SB): 5pcs Weight: 634g Freehub Body: 6 pawls 6 V-springs, forged mini cassette 1sp RHD, exchangeable between 3/8” & 14mm axle adaptors
PATENT NO.CN ZL 2008 2 0117603.XPATENT NO.CN ZL 2008 2 0117603.X
BMX
44
BMX DIRT-JUMP, SINGLE SPEED
AI spacerLock-ring Flat sprocket Options :13T, 14T, 16T, 18T (3t or 2.3t)
Shim washer 1.0t
ACCESSORIES
QL-Y24RSpoke Hole: 14/36, 48 Axle Dim.: 3/8”*110*175, 180mm Axle Material: CrMo Flange PCD: L: 51 / R: 53mm Sealed Cartridge Bearings(SB): 4pcs Weight: 379g Driver: 6 pawls 6 V-springs,
one-piece forged cassette 1sp RHDOption: Alloy end cap w/wider flange,
laser etched logo : QL-Y34R
QL-Y29RSpoke Hole: 14/36, 48 Axle Dim.: M14(hollow ID5.2)*110*175,180mm Axle Material: CrMo Flange PCD: L: 51 / R: 53mm Sealed Cartridge Bearings(SB): 4pcs Weight: 505g Driver: 6 pawls 6 V-springs, one-piece
forged driver (8, 9, 10, 11T 1/8”)RHDOptions: LHD driver : QL-Y19R
RHD driver 3/8” solid axle : QL-Y28R
QL-Y95RSpoke Hole: 14/36, 48 Axle Dim.: M14(hollow ID5.2)*110*175, 180mm Axle Material: CrMo Flange PCD: L: 51 / R: 53mm Sealed Cartridge Bearings(SB): 4pcs Weight: 485g Driver: 6 pawls 6 V-springs,
one-piece forged cassette 1sp RHD
QL-G33FSpoke Hole: 14/36 Axle Dim.: 3/8”*100*140,155mm Axle Material: CrMo Flange PCD: 38mm Sealed Cartridge Bearings(SB): 2pcs Weight: 229g Option: Alloy end cap : QL-G35F
45
BMX DIRT-JUMP, SINGLE SPEED, MINI CASSETTE
QL-YB9RSpoke Hole: 14/36Axle Dim.: M14(hollow ID5.2)*110*175, 180mmAxle Material: CrMoFlange PCD: L: 51 / R: 53mmSealed Cartridge Bearings(SB): 4pcs Weight: 468gDriver: 6 pawls & 6 v-springs, forged mini cassette,
exchangeable for 9, 10, 11T 1/8” cog
PATENT NO.CN ZL 2008 2 0117603.XPATENT NO.CN ZL 2008 2 0117603.X
QL-299RSpoke Hole: 14/36Axle Dim.: M14(hollow ID5.2)*110*175, 180mmAxle Material: CrMoFlange PCD: 53mmSealed Cartridge Bearings(SB): 4pcs Weight: 478gDriver: 4 pawls & 4 v-springs, forged mini cassette,
exchangeable for 9, 10, 11T 1/8” cog
BMX
46
BMX RACING & TRIAL, SINGLE SPEED
QL-MX7RSpoke Hole: 14/32, 36Axle Dim.: M10 (hollow w/internal thread
M6)*135*145mmAxle Material: CrMoFlange PCD: 58mm, Flange distance changed to 75mm.Sealed Cartridge Bearings(SB): 2pcs Weight: 283gOptions: 3/8” solid axle : QL-MX9R
3/8”*135*175mm solid axle & freewheel thread M30*1.0 : QL-MX3R
AI spacerLock-ring Flat sprocket Options :13T, 14T, 16T, 18T (3t or 2.3t)
Shim washer 1.0t
ACCESSORIES
QL-YB5RSpoke Hole: 14/32, 36Axle Dim.: M14(hollow w/internal thread
M6)*135*145mmAxle Material: Al7075Flange PCD: L: 51 / R: 53mmSealed Cartridge Bearings(SB): 4pcs Weight: 314gDriver: 6 pawls & 6 v-springs, forged cassette 1sp RHDOption: 130w : QL-YB0R
QL-SY1FSpoke Hole: 14/32Axle Dim.: M9(hollow w/internal thread
M6)*100*108mmAxle Material: Al7075Flange PCD: 58mmSealed Cartridge Bearings(SB): 2pcs Weight: 182g
QL-Y25RSpoke Hole: 14/32, 36Axle Dim.: M14(hollow w/internal thread
M6)*110*120mmAxle Material: Al7075Flange PCD: L: 51 / R: 53mmSealed Cartridge Bearings(SB): 4pcs Weight: 304gDriver: 6 pawls & 6 v-springs, forged cassette 1sp RHD
47
Spoke Hole: 14/32, 36 Axle Dim.: M14(hollow w/internal thread M8)*110*120mm Axle Material: CrMo Flange PCD: 53mm Sealed Cartridge Bearings(SB): 4pcs Weight: 385g Driver: 6 pawls & 6 v-springs, forged one piece driver
(9,10,11T 1/8”) RHD Options: Disc mount w/internal thread M10*135*145mm
Al7075 axle : QL-Y17RDisc mount w/internal thread M10*135*145mm CrMo axle : QL-YC7R3/8”*24T bolts : QL-Y9PR(front hub w/female bolts 3/8”*24T : QL-Y9PF)
QL-Y96R
Spoke Hole: 14/32, 36Axle Dim.: 3/8”*135*175, 180mmAxle Material: CrMoFlange PCD: 58mmSealed Cartridge Bearings(SB): 3pcs Weight: 542gDriver: forged one piece driver(9, 10, 11T 1/8”) RHD
QL-3v8RSpoke Hole: 14/32, 36Axle Dim.: 3/8”*135*175, 180mmAxle Material: CrMoFlange PCD: 58mmSealed Cartridge Bearings(SB): 3pcs Weight: 587gDriver: forged driver, threaded for cog 12T, 14T (3/32” 2.3t)Option: M14 axle adaptor : QL-3T7R
QL-387R
BMX DISC, FLAT LAND FREE-COASTER PATENT NO.CN 1005977 / TW I316488PATENT NO.CN 1005977 / TW I316488
FLAT LAND FREE-COASTER
BMX
48
BMX FLAT LAND FREE-COASTER, SEALED CARTRIDGE BEARINGS
QL-3u8RONE-PIECE DRIVER Spoke Hole: 14/36Axle Dim.: 3/8”*110*175, 180mmAxle Material: CrMoFlange PCD: 46mmSealed Cartridge Bearings(SB): 3pcs Weight: 488gDriver: forged one piece freecoaster driver
(9T 3/32”) RHDOptions: M14 axle adaptor : QL-3T8R
M14 through axle : QL-391R3/8” axle & 8T driver : QL-3A8R
QL-G33FSpoke Hole: 14/36Axle Dim.: 3/8”*100*140, 155mmAxle Material: CrMoFlange PCD: 38mmSealed Cartridge Bearings(SB): 2pcs Weight: 229gOption: Alloy end cap : QL-G35F
QL-39ARONE-PIECE DRIVERSpoke Hole: 14/36Axle Dim.: M14(hollow w/internal thread
M10)*110*120mmAxle Material: CrMoFlange PCD: 51mmSealed Cartridge Bearings(SB): 3pcs Weight: 602gDriver: forged one piece freecoaster driver
(9T 3/32”) RHD
QL-397RTHREADED DRIVERSpoke Hole: 14/36Axle Dim.: 3/8”*110*175, 180mmAxle Material: CrMoFlange PCD: 46mmSealed Cartridge Bearings(SB): 3pcs Weight: 534gDriver: forged driver, threaded for cog 12T,
14T (3/32” 2.3t)
PATENT NO.CN 1005977 / TW I316488PATENT NO.CN 1005977 / TW I316488
49
MINI FREECOASTER DRIVERSpoke Hole: 14/36Axle Dim.: 3/8”*110*175, 180mmAxle Material: CrMoFlange PCD: 51.5mmLoose Balls: regular cups & conesWeight: 620gDriver: forged mini freecoaster driver
(exchangeable for 9T, 10T, 11T 3/32”) RHD
QL-39BR
BMX FLAT LAND FREE-COASTER, LOOSE BALLS
14mm axle converter axle: Please check the compatibility before inquiry:
1. End nut thickness on 3/8” axle should be same as E size from left chart. 2. The distance should be shorter 0.5mm than B dim. after disassembly 3/8” axle end nut
AB
E±
0.1
±0.
1
M14X1.0
D
23
+0.
5-0
14mm CrMo axle converter, patent no.: GE 29702091.9/TW 131401
Slot type with lock-ring & sprocket options: 14, 16, 18, 19, 20T(2.3t)Threaded type sprocket options: 12, 14, 16T (2.3t)
THREADED DRIVER Spoke Hole: 14/36, 48Axle Dim.: 3/8”*110*175, 180mmAxle Material: CrMoFlange PCD: 51.5mmLoose Balls: regular cups & conesWeight: 626gDriver: forged freecoaster driver, threaded type
(exchangeable for 12T, 14T 3/32” 2.3t) RHDOption: slot type driver
(exchangeable for 14T, 16T 3/32” 2.3t) RHD : QL-396R
QL-395R
THREADED DRIVERSpoke Hole: 14/36Axle Dim.: 3/8”+M14 axle adaptor*110*175, 180mmAxle Material: CrMoFlange PCD: 51.5mmLoose Balls: regular cups & conesWeight: 724gDriver: forged driver, threaded for cog 12T, 14T (3/32” 2.3t)Option: forged driver, slot type for cog 14T, 16T
(3/32” 2.3t) : QL-393R
QL-394R
Options (Tightening torque: 250 kgf.cm) unit: mm
Total length after assembly A B D E
175 42.5 35.5 3/8”*26T 5
155 32.5 25.5 3/8”*26T 5
185 47.5 40.5 3/8”*26T 5
180 46.0 39.0 3/8”*24T 6
185 48.5 41.5 3/8”*24T 6
175 43.5 36.5 3/8”*24T 6
153 32.5 25.5 3/8”*24T 6
160 36.0 29.0 3/8”*24T 6
165 38.5 31.5 3/8”*24T 6
170 41.0 34.0 3/8”*24T 6
171 42.5 35.5 3/8”*24T 7
161 37.5 30.5 3/8”*24T 7
168 40.0 33.0 3/8”*24T 6
165 37.5 30.5 3/8”*26T 5
170 40.0 33.0 3/8”*26T 5
160 35.0 28.0 3/8”*26T 5
50
COASTER BRAKE ADULT BEACH CRUISER
Test approved by CHC , standard BSEN14764, Contract No.11060303BAll complete with sprocket(E-22) & associated parts(E-20, 21, 23, 24, 25, 26), additional accessory will be upcharge Axle length options: 3/8”*24T*110*150, 155, 163, 170, 175Sprocket teeth options: same price for choosing 14T, 16T, 18T, 19T, if 20T, 22T will be upcharge
E-25 E-23 E-24 E-21 E-26
E-20
E-22
new brake arm
17 X 6 hex nut
19 X 3 washer
cap nuts
KT-307R-T100% MADE IN TAIWAN ONLYSpoke Hole: 14/36, 12/36Axle Material: CrMoFlange PCD: 48.5mm Flange distance: 47.4mm Weight: 704g+94g (7 accessories)Surface: Chrome Plated(CP) or ED black
QL-3A7R 100% MADE IN TAIWAN ONLYAl6061-T6 hub bodySpoke Hole: 14/36Axle Material: CrMoFlange PCD: 51mm Flange distance: 53mm Weight: 714g+94g (7 accessories)Surface: Color anodized optionalOption: 3SB Japan QL-3B7R 710g
ACCESSORIES (optional)
E-1 Shell
E-2 Flange
E-3 Axle
E-4 Brake cone
E-5 Dust cap
E-6 Driver
E-7 Brake shoe
E-8 Spring holder
E-9 Clutch spring
E-10 Clutch washer
E-11 Clutch cone
E-12 Ball retainer 7/32” x 9 pcs
E-13 Ball retainer 1/4” x 7 pcs
E-14 Cone cover
E-15 Cone
E-16 Lock nut (a) 17x9mm
E-17 Lock nut (b) 17x7mm
E-18 Washer
E-19 Brake arm
E-20 Flange nut 3/8” x 24t
E-21 Lock ring
E-22 Sprocket 14t, 16t, 18t, 19t, 20t, 22t
E-23 Clip nut
E-24 Clip screw
E-25 Arm clip
E-26 Dust cap
E-27 Bend arm clip
Alloy one piece
51
QROTHER
QL-205vv[R] 52g
QL-204vv[F] 47g
QL-205v3 [R] 56.5g
QL-204v3[F] 50.5g
QL-205v1 [R] 23g
QL-204v1 [F] 21g
Titanium material
52
OTHERS QR
QL-205T[R] 50g
QL-204T[F] 47g
QL-205D[R] 59g
QL-204D[F] 54g
QL-205Y[R] 60g
QL-204Y[F] 55g
Titanium material
53
QL-205W 10MM[R] 111g
QL-204W 9MM[F] 80g
QL-205P[R] 67g
QL-204P[F] 61g
QL-205F8[R] 63g
QL-204F8[F] 58g
QL-205M[R] 71g
QL-204M[F] 65g
54
OTHERS QR
QL-205B[R] 65g
QL-204B[F] 60g
QL-205N[R] 64g
QL-204N[F] 58g
QL-205FK[R] 35g
QL-204FK[F] 30g
QL-205C[R] 100g
QL-204C[F] 95g
55
FREEHUB BODY
Q-LAI FREEHuB BODY / ONE-PIECE DRIvER
6X12 FREEHUB BODY Al7075 for Campy 9, 10, 11sp cassette.One-piece forged, hard anod.Code no. MCPAZJ521HCFD
6X12 FREEHUB BODY CrMo for sram or Shimano 9, 10sp cassette.Cold forged, titanium coated.Code no. MCPAY1121T902
3XSPLINE FREEHUB BODY1 Spring & 3 pawls for MTB, ROAD, CrMo cold forged, Shimano or Sram 8, 9, 10spCode no. MCPAST611T901 (QL-SS8-3, 1SB)
MCPAST600005D (QL-SB8-3, losse balls)
6X12 FREEHUB BODY CrMo One-piece cold forged, 1sp cassette RHD phosphoric coated.Code no. MCPAY9521PC3D
6X12 FREEHUB BODY Al7075 for Shimano or Sram 9, 10sp cassette. One-piece forged, hard anod.Code no. MCPAZJ421HCFD
3X3 FREEHUB BODY 1 L-Spring & 3 pawls for ROADAl7075 One-piece forged for Shimano or Sram 9, 10sp cassette, hard anod.Code no. MCPA2G221HCFD
3X3 FREEHUB BODY 1 L-Springs & 3 pawls for MTB, Cross Country Al7075 cold forged, Shimano or Sram 9, 10sp cassette, hard anod.Code no. MCPA23921HCFD
4X1 FREEHUB BODY 1 L-Spring & 4 pawls for MTB, CrMo for Shimano or Sram 9sp cassette phosphoric coatedCode no. MCPAM3DR000E2
3X3 FREEHUB BODY 1 L-Spring & 3 pawls for ROADAl7075 one-piece forged for Campy 9, 10, 11sp cassette, hard anod.Code no. MCPA2G321HCFD
6X12 ONE-PIECE DRIVEROne-piece cold forged, phosphoric coatedCode no. MCPAY2929PC00 9T 1/8” RHD
MCPAY2920PC00 10T 1/8” RHDMCPAY2921PC00 11T 1/8” RHDMCPAY2928PC00 8T 1/8” RHD
56
OTHERS
FOR CAMPY CASSETTE BODY 11TCrMo cold forged in Chrome Plated (CP)Code no. MCOGGU330CP
LOCK-RING
ID15mm, threaded type for QL-DH2FCode no. MCPA25IA700D2 [BK]
ID15mm, push-in type for QL-DH1F or QL-TW1FCode no. MCPA45NA700D2 [BK]
ID9mm, push-in type for QL-DH1F or QL-TW1FCode no. MCPA45PA700D2 [BK]
ID5.2mm, push-in type for QL-DH1F or QL-TW1FCode no. MCPA05DA700D2 [BK]
ID9mm, threaded type for QL-DH2FCode no. MCPA25DA700D2 [BK]
ID5.2mm, threaded type for QL-DH2FCode no. MCPA25SA700D2 [BK]
EXCHANGEABLE CONvERTER CAPS FOR DH F HuBS
SPARE PARTS
FOR 9SP TO 1SP, ACCESSORY INCLUDINGSprocket, 2 Alloy spacers 13.5L & 20L, lock-ring & shim washer 1tCode no. MCPAHY313CP23 (13T)
MCPAHY314CP23 (14T) MCPAHY316CP23 (16T) MCPAHY31200C5 (12T) MCPAHY318CP23 (18T)
CONvERTER KIT
14T 33g 15T 40g 16T 48g 17T 46g
18T 66g
FOR TRACK FIXED GEAR HUBS, INCLUDINGSprocket, lock-ring & shim washer 1tCode no. MCPA34A00000D (16T)
MCPA32100000D (14T) MCPA42200000D (17T)MCPA42X00000D (18T)MCPADF614PC0D (14T)MCPADF615PC0D (15T)MCPADF616PC0D (16T)MCPADF617PC0D (17T)MCPADF618PC0D (18T)
ACCESSORY
2.7t for 1/8" chaineconomic, BK
2.7t for 1/8" chainlighter, Chrome Plated
57
Converter axle for DH R freehubCrMo solid axle, w/serrated washers & flange nutsM12 step down to 3/8”*200MMCode no.: MBAXZ40R-C02061
14mm CrMo axle converter Patent no.: GE 29702091.9 / TW 131401Please check the compatibility before inquiry:
1.End nut thickness on 3/8” axle should be same as E size from the chart2.The distance should be shorter 0.5mm than B dim. After disassembly 3/8” axle end nut
Converter axle for DH R freehubCrMo solid axle, w/flange nutsM12 step down to 3/8”*185mmCode no.: MBAXME0R-002061
AB
E±
0.1
±0.
1
M14X1.0
D
23
+0.
5-0
Flat sprocket options: 13,14,16,18T (3/32” 2.3t & 1/8” 3t)
Converter axle for QL-SA5F from ID15 to ID5.2mmMBQXSA5F-BD61A6(silver) / MBQXSA5F-BD61A7(black)
Shimano center-lock adaptor & lock-ringCode no.: MCPAADAPTORNK
Options (Tightening torque: 250 kgf.cm) unit: mm
Total length after assembly A B D E
175 42.5 35.5 3/8”*26T 5
155 32.5 25.5 3/8”*26T 5
185 47.5 40.5 3/8”*26T 5
180 46.0 39.0 3/8”*24T 6
185 48.5 41.5 3/8”*24T 6
175 43.5 36.5 3/8”*24T 6
153 32.5 25.5 3/8”*24T 6
160 36.0 29.0 3/8”*24T 6
165 38.5 31.5 3/8”*24T 6
170 41.0 34.0 3/8”*24T 6
171 42.5 35.5 3/8”*24T 7
161 37.5 30.5 3/8”*24T 7
168 40.0 33.0 3/8”*24T 6
165 37.5 30.5 3/8”*26T 5
170 40.0 33.0 3/8”*26T 5
160 35.0 28.0 3/8”*26T 5
Converter axle for DH R freehubCrMo hollow, with or w/o QROption: M10(ID5.2)*145mm Code no. : MBQXME0R-C00061
Converter axle for DH R freehubM12 step down to M10(ID5.2)*145mm Code no. : MBQXME0R-C000A6
Axle for DH R freehubAl7075 solid or CrMo with 2 Al7075 CNC flange nutsOptions: 135W: M12*185mm
150W: M12*196mm165W: M12*211mm
Code no. MBAXME0R-C020A6 (185mm) MBAXME5R-0020A6 (196mm) MBAXME6R-A020A6 (211mm)
58
OTHERS
14
2
3
5
6
7
7
7
8
9
1011
EXPLORED SPARE PARTS FOR SERVICE KIT
ITEM# DESCRIPTION Q’TY
1 Al7075 axle 1
2
Freehub body 1
Sealed cartridge bearing 2
Spacer 1
Alloy cap to prevent mud 1
3 Shim washer 1
4 Seal (above 6 pawls) 1
5 Pawls 6
6 V-springs 6
7 Sealed cartridge bearing (under 6 pawls) 1
8 Sealed cartridge bearing (non-drive side) 1
9 Seal (non-drive side) 1
10 Alloy end cap (non-drive side) 1
11 Alloy end cap (drive side) 1
12 Seal (drive side) 1
13 Hub shell 1
Q-Lai 6x12 MTB freehub
QL-Y12R
Q-Lai 6x12 ROAD freehub for Shimano or sram cassette
QL-ZL4R
Q-Lai 6x12 ROAD freehub for campy cassette
QL-ZL5R
ITEM# DESCRIPTION Q’TY
1 Alloy end cap (non-drive side) 1
2 Seal (non-drive side) 1
3 Sealed cartridge bearing (non-drive side) 1
4 Al7075 axle 1
5 Hub shell 1
6 Sealed cartridge bearing (under 6 pawls) 1
7 Shim washer 1
8 Seal (above 6 pawls) 1
9 V-springs 6
10 Pawls 6
11
Freehub body 1
Sealed cartridge bearing 2
Spacer 1
Alloy cap to prevent mud 1
12 External seal 1
13 Alloy end cap (drive side) 1
ITEM# DESCRIPTION Q’TY
1 Alloy end cap (non-drive side) 1
2 Seal (non-drive side) 1
3 Sealed cartridge bearing (non-drive side) 1
4 Al7075 axle 1
5 Hub shell 1
6 Sealed cartridge bearing (under 6 pawls) 1
7 Shim washer 1
8 Seal (above 6 pawls) 1
9 V-springs 6
10 Pawls 6
11
Freehub body 1
Sealed cartridge bearing 2
Spacer 1
Alloy cap to prevent mud 1
12 External seal 1
13 Alloy end cap (drive side) 1
59
3
13
12
4
5
6
7
8
9
10
11
12
2
ITEM# DESCRIPTION Q’TY
1 CrMo solid axle 1
2 One-piece driver 9t 1
3 Bearing, driver side 1
4 Bearing seat, steel in thread 1
5 Bearing, outer driver 1
6 Patent clutch cone 1
7 Ball retainer 1
8 Washer 1
9 Hub shell 1
10 Bearing, non-drive side 1
11 Alloy end cap, non-driver side 1
12 Cone nut 2
13 Alloy end cap, driver side 1
ITEM# DESCRIPTION Q’TY
1 CrMo axle 1
2
One-piece driver 9t,10t,11t available 1
Sealed cartridge bearing 2
Shim washer between 2 bearings 1
3 Shim washer 1
4 Seal (above 6 pawls) 1
5 Pawls 6
6 V-springs 6
7 Sealed cartridge bearing (under 6 pawls) 1
8 Sealed cartridge bearing (non-drive side) 1
9 Alloy end cap (non-drive side) 1
10 Lock-nut (non-drive side) 1
11 Lock-nut (drive side) 1
12 Hub shell 1
ITEM# DESCRIPTION Q’TY
1 CrMo axle 1
2
CrMo 1sp freehub body 1Sealed cartridge bearing 2
Spacer 1Alloy cap (to prevent mud) 1
3 Shim washer 1
4 Seal (above 6 pawls) 1
5 V-springs 6
6 Pawls 6
7 Sealed cartridge bearing v(under 6 pawls) 1
8 Sealed cartridge bearing (non-drive side) 1
9 Alloy end cap (non-drive side) 1
10 Lock-nut (non-drive side) 1
11 Lock-nut (drive side) 1
12 Hub shell 1
U-FREE BMX freecoaster one-piece driver
QL-3u8R
Q-Lai 6x12 BMX one-piece driver
QL-Y29R
Q-Lai 6x12 BMX 1sp freehub
QL-Y95R
60
OTHERS EXPLORED SPARE PARTS FOR SERVICE KIT
Q-Lai 3x3 MTB freehub for Shimano cassette
QL-239R
Q-Lai 3x3 ROAD freehub for Shimano or sram cassette
QL-2G2R
Q-Lai 3x3 ROAD freehub for campy cassette
QL-2G3R
ITEM# DESCRIPTION Q’TY
1 Alloy end cap (L) 1
2 Alloy end cap (R) 1
3 Sealed cartridge bearing (non-drive side) 1
4 Sealed cartridge bearing (drive side) 1
5 Hub shell 1
6 Al7075 axle 1
7 Washer 1
8 Ratchet ring 1
9 Steel spacer 1
10 Internal seal 1
11 L-spring 1
12 Pawl 3
13 Al7075 freehub body (Shimano) 1
14 External seal (drive side) 1
ITEM# DESCRIPTION Q’TY
1 Alloy end cap (L) 1
2 Seal (non-drive side) 1
3 Sealed cartridge bearing (non-drive side) 1
4 Al7075 axle 1
5 Hub shell 1
6 Sealed cartridge bearing (drive side) 1
7 Washer 1
8 Ratchet ring 1
9 Steel spacer 1
10 Internal seal 1
11 L-spring 1
12 Pawl 3
13 Al7075 freehub body 1
14 Seal (drive side) 1
15 Alloy end cap (R) 1
ITEM# DESCRIPTION Q’TY
1 Alloy end cap (L) 1
2 Seal (non-drive side) 1
3 Sealed cartridge bearing (non-drive side) 1
4 Al7075 axle 1
5 Hub shell 1
6 Sealed cartridge bearing (drive side) 1
7 Washer 1
8 Ratchet ring 1
9 Steel spacer 1
10 Internal seal 1
11 L-spring 1
12 Pawl 3
13 Al7075 freehub body 1
14 Seal (drive side) 1
15 Alloy end cap (R) 1
61
1
2
3
45
6
7
8
9
10
11
12
13
2
3
5
7
8
4
1 6
Q-Lai 3xspline freehub, 2 sealed bearings
QL-S16R
Q-Lai 3xspline freehub, loose balls
QL-SJ6R
ITEM# DESCRIPTION Q’TY
1 Axle 1
2 Cassette body set, splined type 1
3 Sealed cartridge bearing, Inside cassette body 1
4 Seal, drive side 1
5 Al end cap, drive side 1
6 Al end cap, non-drive side 1
7 Seal, non-drive side 1
8 Sealed cartridge bearing, non-drive side 1
9 C-clamp 1
10 Fixing bolt 1
11 Shim washer 1
12 Hub shell 1
13 Seal, outer cassette body 1
ITEM# DESCRIPTION Q’TY
1 Axle set 1
2 Cassette body set 1
3 Rubber seal, drive side 1
4 Seal, non-drive side 1
5 Steel balls 9
6 Rubber seal 1
7 Hub shell 1
8 Seal, outer cassette body 1
62
OTHERSOTHERS REPLACEMENT INSTRUCTION
1. Un-tigthten the lock-nut from drive side
2. Take off the one-piece driver
3. Take the 1sp freehub body and slide into the axle
4. Threaded the lock-nut in drive side
5. Tighten the lock-nut in drive side
1. Tighten the lock-nut in disc side
2. Un-tighten the lock-nut in drive side
3. Take out the freehub body
4. Slide in the new freehub body
5. Threaded the lock-nut in drive side
6. Tighten the lock-nut in drive side
Q-LAI TAIWAN 6X12 6 PAWLS & 6 v-SPRINGS, ONE-PIECE DRIvER
Q-LAI TAIWAN 6X12 6 PAWLS & 6 v-SPRINGS, DH FREEHuB SYSTEM
63
1. Tighten the alloy end cap in non-drive side
2. Un-tighten the alloy end cap from drive side
3. Take out the freehub body
4. Slide in the new freehub body
5. Threaded the lock-nut in drive side
6. Tighten the lock-nut in drive side
Q-LAI TAIWAN 3X3 3 PAWLS & 1 L-SPRING, ROAD FREEHuB SYSTEM
64
OTHERSOTHERS REPLACEMENT INSTRUCTION
1. Un-tighten the lock-nut by wrench
2. Take out the freehub body
3. Un-tighten the lock-nut by disassembly tool with wrench
4. Take off the lock-nut 5. Put down the hub(disc side) on holding tool(A)
6. Push out the bearing by rubber hammer
7. Put down the axle & bearing to hold-ing tool(A)
8. Push out the bearing by rubber hammer
9. Put the axle inside the hub shell from disc side
10. Push the other bear-ing out by rubber hammer
11. Put down the hub shell(drive side) onto holding tool(B)
12. Put the axle inside the hub shell
13. Take on bear-ing onto hub shell(disc side)
14. Take the hold-ing tool(C) onto the bearing (disc side)
15. Install the bearing with rubber hammer
Q-LAI TAIWAN 6X12 RATCHET RING 4 PAWLS & 1 SPRING SYSTEM
65
16. Put down the hub on holding tool(C)
20. Take the other bear-ing for drive side
17. Take one bearing on the axle(drive side)
18. Take the holding tool(B) onto the bear-ing (drive side)
19. Install the bearing with rubber hammer
24. Slide the new free-hub body inside the axle
21. Take the holding tool(B) onto the bear-ing (drive side)
25. Threaded the lock-nut (drive side)
22. Threaded the al-loy end cap(disc side) onto axle
23. Tighten the alloy end cap(disc side) onto axle
26. Tighten the lock-nut(drive side) with wrench
66
OTHERSOTHERS REPLACEMENT INSTRUCTION
1. Un-tighten lock-nut from non-drive side
2. Take off the lock-nut 3. Un-tighten lock-nut from from drive side
4. Take off the lock-nut 5. Take out the freehub body
6. Put down the hub on holding tool(A)
7. Push out the bearing out of the freehub by rubber hammer
8. Take off the bearing and axle
9. Put the axle down to the holding tool(A)
10. Push out the bearing from the axle by rub-ber hamme
11. Put the hub shell onto holding tool(B)
12. Put the axle inside the hub shell
13. Put the bearing on non-drive side
14. Put the holding tool (C) onto the bearing
15. Install the bearing with rubber hammer
Q-LAI 6 PAWLS & 6 v-SPRINGS SYSTEM, ROAD SYSTEM
67
16. Put down the hub(non-drive side) on holding tool(C)
20. Put the shim washer above the bearing in drive side
24. Threaded the end nut from non-drive side
17. Put the bearing
21. Take the new freehub body
25. Tighten the alloy end cap(non-drive side) with force 100kgf.cm by allen key
18. Put the holding tool(B) onto the axle and bearing
22. Slide the new freehub body into the axle
26. Threaded the alloy end cap in drive side
19. Install the bearing with rubber hammer
23. Take the seal and push it into hub shell (non drive side)
27. Tighten the alloy end caps in drive side with force 120kgf.cm by allen key