Post on 04-Jul-2020
transcript
Carbide tools for the fastening industry
2018 EN
CERATIZIT is a high-tech engineering group specialised in tooling and hard material technologies.
HARD MATERIAL SOLUTIONS BY CERATIZIT 2 FASTENING INDUSTRY 2018
www.ceratizit.com
Sarah-Jane Breitenreiter,Customer Service Centre
Together towardsprofitable growth:we can give you thedecisive competitiveadvantage.
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 3
fastening-industry
Precision and stability for fastener productionThe mass production of nails, rivets and screws requires highly wear-resistant forming tools to achieve a long tool life and minimise down time. Hard Material Solutions by CERATIZIT offers ground ready-to-use carbide tools and tool holders that meet these high demands and cover all phases of nail production. In addition to knives, grippers, punches and feeders for nail making machines, our product portfolio also comprises planetary dies for thread rolling machines.
From now on our standard tools are also available for available in our online shop E-Techstore: Including availability in real time and detailed product information, such as the Example STEP Files – and that of course at 7 days a week, around the clock. MoreInformation can be found on page 37 of thisbrochure or at www.e-techstore.com.
HARD MATERIAL SOLUTIONS BY CERATIZIT 4 FASTENING INDUSTRY 2018
www.ceratizit.com
Advantages and benefits
More than 30 years of experience Extensive knowledge in the development of outstanding products
Fast and flexible production processes Short delivery times for customised products
Semi-finished products in stock, ready to be machined
Short delivery times for standard products
Reliable carbide quality A long tool life and low downtimes increase your profitability
Flexibility in using all CT grades
Development of new projects in consultation with customers
Customised tools tailored to your individual needs
Advantages Benefits
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 5
fastening-industry
A carbide solution for every wear partNail making machines that use the ‘single stroke method’ have a feeding device that automatically transports the wire from the coil to the straightening rolls and then into the tool holders (KBE, GKB). The gripper forms are integrated into the nail making tools, which close tightly around the wire before the header punch (DOP) hits on the projecting end of the wire to form the nail head with a single stroke.When the header punch moves backwards, the
nail making tools open and the feeder (EKL) moves the wire forward before the tool closes again and the knife inserts (ZBE, ZBE PRO) come together from both sides to point and cut the wire nail or rivet, leaving sufficient wire overhang to form the head of the next nail. In the last step, the knives move backwards and the finished nail is discharged before the header punch forms the next head.
Header punchPage 09
KnifePage 06-07
Wire
Tool Page 08
HARD MATERIAL SOLUTIONS BY CERATIZIT 6 FASTENING INDUSTRY 2018
www.ceratizit.com
KnivesZBE PRO and ZBH PRO
ZBE PRO is our latest generation of knives for Wafios machines (any model from N31 to N61) and similar machines from vendors like Vitari, Kovopol, Moroni and Ticho. Improved product characteristics further increase the stability and robustness of the system. The ZBE PRO knives are combined with a dedicated tool holder, the ZBH PRO, which accommodates the larger dimensions compared to our standard ZBE knives.
The most common geometries (diamond points with angles of 35°, 40° and 50°, see page 12) are available from stock. Other profiles like clinch points, blunt points, ballistic points and conical points can be produced on demand.In addition to different geometries there are two
different sizes of ZBE PRO knives available: a smaller one, called ZBE PRO N3, and a larger one, called ZBE PRO N4.
Whenever possible, the larger ZBE PRO N4 should be used. However, the decision which knife size should be used depends on the cross section of the tool holder in which the knife will be mounted. The knife must be completely embedded and the tool holder must provide the necessary mechanical resistance.
If you are unsure which size to use, please feel free to contact us! Our support staff will gladly assist you in choosing the right solution for your application.
Wafios machine ZBE PRO ZBH PRO
N3/N31 ZBE PRO N3 ZBH PRO 2014
N4/N41 ZBE PRO N4 ZBH PRO 2516
N5/N51 ZBE PRO N4 ZBH PRO 2818
N6/N61 ZBE PRO N4 ZBH PRO 3222
ZBE PRO and ZBH PRO for Wafios machines
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 7
fastening-industry
ZBE PRO dimensions
ZBE and ZBH
The ZBE knives are our proven standard solution for nail making machines. Common geometries are available from stock (see page 12). Special shapes like knives for clinch points, blunt points or ballistic points, which are specifically adapted to your needs, are available in the form of semi-finished products (ground, eroded).
The dedicated knife holder ZBH is made of steel. A screw fixes the insert on the holder. ZBH units with standard dimensions are available from stock (see page 12).
ZBE PRO N3 (mounted with M5 screw)12.6
14
15° 15°
7.5
17
ZBE PRO N4 (mounted with M6 screw)
Thanks to the greater height (9.5 mm as opposed to 8.5 mm), the ZBE PRO N4 can cut wires of larger diameter than the traditional ZBE knives.
15.5
18
15°15°
9.5
19
HARD MATERIAL SOLUTIONS BY CERATIZIT 8 FASTENING INDUSTRY 2018
www.ceratizit.com
KBE and KBH
Clamping toolsGKB (brazed)The GKB is a tool with a robust design. The carbide wear part is brazed onto the steel body of the tool holder.
Tool insert KBEOur two-part clamping tool is an economical solution. When the tool is worn out, only the carbide insert (KBE) needs to be replaced, which is mounted on the tool holder (KBH) with a screw. Normally the insert is a parallelepiped part (see page 12).
The inserts KBE 20 MRF, KBE 16 MRF, KBE 20 ND and KBE 16 ND are also available in POWER DIE 2000 split version.
The two-piece design of the insert provides unique breakage protection for clamping inserts and helps nail producers improve the tool life, thus keeping machine downtime to a minimum and optimising capacity utilisation.
Tool holder KBHThe tool holder KBH is made of steel and holds the carbide insert (KBE), which is safely locked into the tool holder with a screw that clamps the insert on the lateral surfaces.
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 9
fastening-industry
Header punch
The header punches, which form the nail head, are available in different variants:
▲ Plain▲ Serrated▲ With letters▲ With ‘calotte’ ▲ ...
HARD MATERIAL SOLUTIONS BY CERATIZIT 10 FASTENING INDUSTRY 2018
www.ceratizit.com
Planetary dies for thread rolling machinesProfiled nails are the best option when you need a nail with greater extraction strength.Compared to standard nails, the profiled shank increases the grip of the nail in the material and consequently its extraction force. Profiled nails are produced in thread rolling machines, which use planetary dies to cold-form the desired profile into the shank.
Planetary dies are composed of a roll and a segment, between which the nails are rolled. The roll is mounted on the thread rolling machine and rotates around its central axis. One segment is mounted next to it and fixed to the machine. The nails (with both the head and the
point already made) are fed into the system from one side. When they come in contact with the moving roll they start to rotate and are transported in this way between roll and segment.
There are two main types of rolled nails: ring nails, which have a saw tooth profile, and screw nails, which have a fluted helical profile.
Over the years, we have optimised the design of the tools and the production process and so can guarantee you faultless high-quality products.
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 11
fastening-industry
Application areasThe fastening industry uses our tools to produce a broad range of fasteners and special items, e.g. for the construction industry or shipping pallet production.
▲ Nails▲ Ring nails▲ Screw nails▲ (Blind) rivets▲ Special items
Supply details: tool holder including clamping screw, but without insert Ordering example: 10 pairs of inserts 12 ∅d = 2.0+0,05; ∅D = 4.0; R = .3; β = 160°
Main features of nailheads After designation, please indicate the wire ∅, including tolerance and head shape
Types of heads and types of points
Normal head
Ballistic point Blunt point
Pan head Cup head Trumpet head Bolt head
Diamond point Short diamond point
Clinch point Chisel point
HARD MATERIAL SOLUTIONS BY CERATIZIT 12 FASTENING INDUSTRY 2018
www.ceratizit.com
Availability and rangeClamped nail making tools
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 13
fastening-industry
Tools for N1, N2, N11, N21
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1 H2
KBH2812-N1-N2 N1, N2, N11, N21 28 18 62 70 12 2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1
GKB2818-N1-N2 N1, N2, N11, N21 28 18 62 70
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH2012-N1-N2 N1, N2, N11, N21 20 12 66
ZBH2014-N1-N2 N1, N2, N11, N21 20 14 66
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
S H
KBE 12 N1, N2, N11, N21 12 12
48
B H L L1
KBH2812-N1-N2 N1, N2, N11, N21 28 18 62 70
2
S HKBE 12 N1, N2, N11, N21 12 12
B H L L1
GKB2818-N1-N2 N1, N2, N11, N21 28 18 62 70
B H LZBH2012-N1-N2 N1, N2, N11, N21 20 12 66ZBH2014-N1-N2 N1, N2, N11, N21 20 14 66
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
48
B H L L1
KBH2812-N1-N2 N1, N2, N11, N21 28 18 62 70
2
S HKBE 12 N1, N2, N11, N21 12 12
B H L L1
GKB2818-N1-N2 N1, N2, N11, N21 28 18 62 70
B H LZBH2012-N1-N2 N1, N2, N11, N21 20 12 66ZBH2014-N1-N2 N1, N2, N11, N21 20 14 66
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
48
B H L L1
KBH2812-N1-N2 N1, N2, N11, N21 28 18 62 70
2
S HKBE 12 N1, N2, N11, N21 12 12
B H L L1
GKB2818-N1-N2 N1, N2, N11, N21 28 18 62 70
B H LZBH2012-N1-N2 N1, N2, N11, N21 20 12 66ZBH2014-N1-N2 N1, N2, N11, N21 20 14 66
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
48
B H L L1
KBH2812-N1-N2 N1, N2, N11, N21 28 18 62 70
2
S HKBE 12 N1, N2, N11, N21 12 12
B H L L1
GKB2818-N1-N2 N1, N2, N11, N21 28 18 62 70
B H LZBH2012-N1-N2 N1, N2, N11, N21 20 12 66ZBH2014-N1-N2 N1, N2, N11, N21 20 14 66
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
48
B H L L1
KBH2812-N1-N2 N1, N2, N11, N21 28 18 62 70
2
S HKBE 12 N1, N2, N11, N21 12 12
B H L L1
GKB2818-N1-N2 N1, N2, N11, N21 28 18 62 70
B H LZBH2012-N1-N2 N1, N2, N11, N21 20 12 66ZBH2014-N1-N2 N1, N2, N11, N21 20 14 66
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT 14 FASTENING INDUSTRY 2018
www.ceratizit.com
Tool holder for knife – PRO version
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 2014 PRO N1, N2, N11, N21 20 14 66
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE35-PRO N3 N1, N2, N11, N21 14 7.5 17 35°
ZBE40-PRO N3 N1, N2, N11, N21 14 7.5 17 40°
ZBE40-GS-PRO N3 N1, N2, N11, N21 14 7.5 17 40°
ZBE50-PRO N3 N1, N2, N11, N21 14 7.5 17 50°
Insert for knife – PRO version
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
∅D L
DOP 11 N1, N2, N11, N21 11 52
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 15
fastening-industry
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
∅D L t α
DOP 11-R N1, N2, N11, N21 11 52 1.0 60°
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
S L
EKL 0505-35 N1, N2, N11, N21 5 35
Type,ordering description Machine type
Dimensions in mm
∅D L
DOP 11-S N1, N2, N11, N21 11 52
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Insert for knife
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT 16 FASTENING INDUSTRY 2018
www.ceratizit.com
Tools for N3, N31
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1 H2
KBH 2812 N3, N31 28 18 74 74 12
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1
GKB 2818 N3, N31 28 18 74 74
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
S H
KBE 12 N3, N31 12 12
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 2014 N3, N31 20 14 66
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 17
fastening-industry
Tool holder for knife – PRO version
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 2014 PRO N3, N31 20 14 66
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE35-PRO N3 N3, N31 14 7,5 17 35°
ZBE40-PRO N3 N3, N31 14 7,5 17 40°
ZBE40-GS-PRO N3 N3, N31 14 7,5 17 40°
ZBE50-PRO N3 N3, N31 14 7,5 17 50°
Insert for knife – PRO version
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE 43-N3 N3, N31 12 7 20 43°
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Type,ordering description Machine type
Dimensions in mm
∅D L
DOP 13 N3, N31 13 52
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
53
B H L βZBE 35 N4, N41 14 8,5 20 35°ZBE 40 N4, N41 14 8,5 20 40°ZBE 50 N4, N41 14 8,5 20 50°ZBE 60.1 N4, N41 14 8,5 20 60°
GS
Ø D LDOP 16 N4, N41 16 62
Ø D L t αDOP 16-R N4, N41 16 62 1,5 60°
Ø D LDOP 16-S N4, N41 16 62
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N4, N41
HARD MATERIAL SOLUTIONS BY CERATIZIT 18 FASTENING INDUSTRY 2018
www.ceratizit.com
Type,ordering description Machine type
Dimensions in mm
∅D H L α
DOP 13-R N3, N31 13 52 1.0 60°
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Type,ordering description Machine type
Dimensions in mm
∅D L
DOP 13-S N3, N31 13 52
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Type,ordering description Machine type
Dimensions in mm
S L
EKL 0707-40 N3 7 40
EKL 0707-50 N31 7 50
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 19
fastening-industry
Tools for N4, N41
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1 H2
KBH 4016 N4, N41 40 25 80 95 16.5
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
S H
KBE 16 N4, N41 16.5 16.5
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1
GKB 4025 N4, N41 40 25 80 95
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 2516 N4, N41 25 16 81
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
HARD MATERIAL SOLUTIONS BY CERATIZIT 20 FASTENING INDUSTRY 2018
www.ceratizit.com
Tool holder for knife – PRO version
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 2516 PRO Wafios N4, N41 25 16 80.5
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L
DOP 16 N4, N41 16 62
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE 35-PRO N4 N4, N41 18 9.5 19 35°
ZBE 40-PRO N4 N4, N41 18 9.5 19 40°
ZBE 40-GS-PRO N4 N4, N41 18 9.5 19 40°
ZBE 50-PRO N4 N4, N41 18 9.5 19 50°
Insert for knife – PRO version
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE 35 N4, N41 14 8.5 20 35°
ZBE 40 N4, N41 14 8.5 20 40°
ZBE 50 N4, N41 14 8.5 20 50°
ZBE 60.1 N4, N41 14 8.5 20 60°
Insert for knife
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
53
B H L βZBE 35 N4, N41 14 8,5 20 35°ZBE 40 N4, N41 14 8,5 20 40°ZBE 50 N4, N41 14 8,5 20 50°ZBE 60.1 N4, N41 14 8,5 20 60°
GS
Ø D LDOP 16 N4, N41 16 62
Ø D L t αDOP 16-R N4, N41 16 62 1,5 60°
Ø D LDOP 16-S N4, N41 16 62
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N4, N41
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 21
fastening-industry
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L
DOP 16-S N4, N41 16 62
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L t α
DOP 16-R N4, N41 16 62 1,5 60°
Feeder
Type,ordering description Machine type
Dimensions in mm
S L
EKL 0707-50 N4, N41 7 50
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT 22 FASTENING INDUSTRY 2018
www.ceratizit.com
Tools for N5, N51
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1 H2
KBH 4516 N5, N51 45 30 105 120 16.5
KBH 4520 N5, N51 45 30 105 120 16.5
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1
GKB 4530 N5, N51 45 30 105 120
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
S H
KBE 16 N5, N51 16.5 16.5
KBE 20 N5, N51 20 16.5
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH2818 N5, N51 28 18 108
ZBH2818-H N5, N51 28 18 108
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N3150
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 23
fastening-industry
Tool holder for knife – PRO version
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 2818 PRO N5, N51 28 18 108
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE35-PRO N4 N5, N51 18 9.5 19 35°
ZBE40-PRO N4 N5, N51 18 9.5 19 40°
ZBE40-GS-PRO N4 N5, N51 18 9.5 19 40°
ZBE50-PRO N4 N5, N51 18 9.5 19 50°
Insert for knife – PRO version
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE 35 N5, N51 14 8.5 20 35°
ZBE 40 N5, N51 14 8.5 20 40°
ZBE 40-H N5, N51 14 11 20 40°
ZBE 50 N5, N51 14 8.5 20 50°
ZBE 50-H N5, N51 14 11 20 50°
ZBE 60.1 N5, N51 14 8.5 20 60°
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21 53
B H L βZBE 35 N4, N41 14 8,5 20 35°ZBE 40 N4, N41 14 8,5 20 40°ZBE 50 N4, N41 14 8,5 20 50°ZBE 60.1 N4, N41 14 8,5 20 60°
GS
Ø D LDOP 16 N4, N41 16 62
Ø D L t αDOP 16-R N4, N41 16 62 1,5 60°
Ø D LDOP 16-S N4, N41 16 62
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N4, N41
HARD MATERIAL SOLUTIONS BY CERATIZIT 24 FASTENING INDUSTRY 2018
www.ceratizit.com
Feeder
Type,ordering description Machine type
Dimensions in mm
S L
EKL 1010-60 N5, N51 10 60
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L
DOP 20 N5, N51 20 75
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L t α
DOP 20-R N5, N51 20 75 1,5 60°
Type,ordering description Machine type
Dimensions in mm
Ø D L
DOP 20-S N5, N51 20 75
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mmNA
GEL
INDU
STRI
ELÖ
SUNG
EN F
ÜR D
IE U
MFO
RMTE
CHNI
K
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 25
fastening-industry
Tools for N6, N61
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1 H2
KBH 4516L N6, N61 45 30 115 134 16.5
KBH 4520L N6, N61 45 30 115 134 16.52
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L L1
GKB 4530L N6, N61 45 30 115 134
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
S H
KBE 16 N6, N61 16.5 16.5
KBE 20 N6, N61 20 16.5
Tool holder for knife
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 3222 N6, N61 32 22 130
ZBH 3222 H N6, N61 32 22 130
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
50
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N3150
B H L L1
KBH 2812 N3, N31 28 18 74 74
2
S HKBE 12 N3, N31 12 12
S S L L1
GKB 2818 N3, N31 28 18 74 74
B H LZBH 2014 N3, N31 20 14 66
B H L βZBE 43-N3 N3, N31 12 7 20 43°
GS
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N3, N31
HARD MATERIAL SOLUTIONS BY CERATIZIT 26 FASTENING INDUSTRY 2018
www.ceratizit.com
2
GS
Brazed nail making tool
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE 35 N6, N61 14 8.5 20 35°
ZBE 40 N6, N61 14 8.5 20 40°
ZBE 40-H N6, N61 14 11 20 40°
ZBE 50 N6, N61 14 8.5 20 50°
ZBE 50-H N6, N61 14 11 20 50°
ZBE 60.1 N6, N61 14 8.5 20 60°
Tool holder for knife – PRO version
Type,ordering description Machine type
Dimensions in mm
B H L
ZBH 3222 PRO N6, N61 32 22 128
Type,ordering description Machine type
Dimensions in mm
B H L ß
ZBE35-PRO N4 N6, N61 18 9,5 19 35°
ZBE40-PRO N4 N6, N61 18 9,5 19 40°
ZBE40-GS-PRO N4 N6, N61 18 9,5 19 40°
ZBE50-PRO N4 N6, N61 18 9,5 19 50°
Insert for knife – PRO version
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21 53
B H L βZBE 35 N4, N41 14 8,5 20 35°ZBE 40 N4, N41 14 8,5 20 40°ZBE 50 N4, N41 14 8,5 20 50°ZBE 60.1 N4, N41 14 8,5 20 60°
GS
Ø D LDOP 16 N4, N41 16 62
Ø D L t αDOP 16-R N4, N41 16 62 1,5 60°
Ø D LDOP 16-S N4, N41 16 62
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N4, N41
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 27
fastening-industry
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L
DOP 25 N6, N61 25 90
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
Ø D L t α
DOP 25-R N6, N61 25 90 1,5 60°
Type,ordering description Machine type
Dimensions in mm
Ø D L
DOP 25-S N6, N61 25 90
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Feeder
Type,ordering description Machine type
Dimensions in mm
S L
EKL 1010-60 N6, N61 10 60
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mmNA
GEL
INDU
STRI
ELÖ
SUNG
EN F
ÜR D
IE U
MFO
RMTE
CHNI
K
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mmNA
GEL
INDU
STRI
ELÖ
SUNG
EN F
ÜR D
IE U
MFO
RMTE
CHNI
K
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
49
B H L βZBE 43-N3 N1, N2, N11, N21 12 7 20 43°
Ø D LDOP 11 N1, N2, N11, N21 11 52
Ø D L t αDOP 11-R N1, N2, N11, N21 11 52 1,0 60°
Ø D LDOP 11-S N1, N2, N11, N21 11 52
S LEKL 0505-35 N1, N2, N11, N21 5 35
Zwickbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, glatt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Döpper, geriffelt
Type, Bestellbezeichnung Maschinentyp
Maße in mm
... Weitere Stirnprofile auf Anfrage
Döpper, beschriftet
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N1, N2, N11, N21
HARD MATERIAL SOLUTIONS BY CERATIZIT 28 FASTENING INDUSTRY 2018
www.ceratizit.com
Tools for N80
Cutting knife
Cutting tool
Clamping insert
Tool holder
Cutting knife
Cutting tool
Clamping insert
Tool holder
Type,ordering description
Dimensions in mm
S H
KBE 16-ND 16.5 16.5
Cutting knife
Cutting tool
Clamping insert
Tool holder
Type,ordering description
Dimensions in mm
B H L
KBH 3716 37 16.4 68.5
Type,ordering description Wafios-Nº
Dimensions in mm
B H L
ASW-N80 4221.5.1305... 30 15 50
61
B H LKBH 3716 37 16,4 68,5
S HKBE 16-ND 16,5 16,5KBE 16-ND-G 16,5 16,5
B H LASW-N80 4221.5.1305... 30 15 50
B H LASM-N80 4221.5.1301... 30 15 50
Klemmbackenhalter
Type, Bestellbezeichnung
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung
Maße in mm
Abschneidewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80
61
B H LKBH 3716 37 16,4 68,5
S HKBE 16-ND 16,5 16,5KBE 16-ND-G 16,5 16,5
B H LASW-N80 4221.5.1305... 30 15 50
B H LASM-N80 4221.5.1301... 30 15 50
Klemmbackenhalter
Type, Bestellbezeichnung
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung
Maße in mm
Abschneidewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80 61
B H LKBH 3716 37 16,4 68,5
S HKBE 16-ND 16,5 16,5KBE 16-ND-G 16,5 16,5
B H LASW-N80 4221.5.1305... 30 15 50
B H LASM-N80 4221.5.1301... 30 15 50
Klemmbackenhalter
Type, Bestellbezeichnung
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung
Maße in mm
Abschneidewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80
Cutting knife
Cutting tool
Clamping insert
Tool holder
Type,ordering description Wafios-Nº
Dimensions in mm
B H L
ASM-N80 4221.5.1301... 30 15 50
61
B H LKBH 3716 37 16,4 68,5
S HKBE 16-ND 16,5 16,5KBE 16-ND-G 16,5 16,5
B H LASW-N80 4221.5.1305... 30 15 50
B H LASM-N80 4221.5.1301... 30 15 50
Klemmbackenhalter
Type, Bestellbezeichnung
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung
Maße in mm
Abschneidewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 29
fastening-industry
N80HN80
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
B H L ß
ZBE 30.0-N80-H 4222.5.1346.03 16.5 20 20 30°
ZBE 40.0-N80-H 4222.5.1346.00 16.5 20 20 40°
ZBE 60.0-N80-H 4222.5.1346.04 16.5 20 20 60°
ZBE 35.0-N80 4222.5.1346.03 12 12 25 35°
ZBE 40.0-N80 4222.5.1346.00 12 12 25 40°
ZBE 47.0-N80 4222.5.1346.02 12 12 25 47°
ZBE 60.0-N80 4222.5.1346.04 12 12 25 60°
N80HN80
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
Ø D L
DOP 20-N80 4222.5.1377.00 20 138
N80HN80
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
Ø D L t α
DOP 20-N80-R 4222.5.1376.00 20 138 1,0 60°
HARD MATERIAL SOLUTIONS BY CERATIZIT 30 FASTENING INDUSTRY 2018
www.ceratizit.com
Feeder
Type,ordering description Wafios-Nº
Dimensions in mm
∅D L
EKL 1045 4226.5.1308.01 10 45
63
B H LFHW-N80 4221.5.1310... 16 10 67,5FHW-N80 4227.5.1312... 18 12 78
Ø D H LFHA-N80 4222.5.1315... 30 15 50
Ø D LEKL 1045 4226.5.1308.01 10 45
B H LABO-N80 4221.5.1320... 21 12 12ABO-N80-N 4227.5.1304.00 Ø 20 x 19,5
HM-Festhaltewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Festhalteamboss
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Amboss
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80
N80HN80
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
Ø D L
DOP 20-N80-S – 20 138
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 31
fastening-industry
Tools for N90, N90A
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder
Type,ordering description Machine type
Dimensions in mm
B H L L = L1
KBH 4016-N90 N90 40 25 16.5 80 2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder
Type,ordering description Machine type
Dimensions in mm
S H
KBE 16 N90 16.5 16.5
KBE 16A-14 N90 16,5 14
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder
Type,ordering description Machine type
Dimensions in mm
B H L = L1
GKB 4025-N90 N90 40 25 90
2
Brazed nail making tool
Clamping insert
Tool holder
Tool holder
Type,ordering description Machine type
Dimensions in mm
B H H1 H2 L = L1
KBH 4016-N90A-20 N90 40 25 20 14 80
64
B H H2 LKBH 4016-N90 N90 40 25 16,5 80
2
B H H1 H2 LKBH 4016-N90A-20 N90A 40 25 20 14 80
S HKBE 16 N90 16,5 16,5KBE 16A-14 N90A 16,5 14KBE 16-20 N90 16,5 20
B H LGKB 4025-N90 N90 40 25 80GKB 4025-N90-35 N90 40 35 80
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N90, N90A, Wafios-Nº64
B H H2 LKBH 4016-N90 N90 40 25 16,5 80
2
B H H1 H2 LKBH 4016-N90A-20 N90A 40 25 20 14 80
S HKBE 16 N90 16,5 16,5KBE 16A-14 N90A 16,5 14KBE 16-20 N90 16,5 20
B H LGKB 4025-N90 N90 40 25 80GKB 4025-N90-35 N90 40 35 80
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N90, N90A, Wafios-Nº
64
B H H2 LKBH 4016-N90 N90 40 25 16,5 80
2
B H H1 H2 LKBH 4016-N90A-20 N90A 40 25 20 14 80
S HKBE 16 N90 16,5 16,5KBE 16A-14 N90A 16,5 14KBE 16-20 N90 16,5 20
B H LGKB 4025-N90 N90 40 25 80GKB 4025-N90-35 N90 40 35 80
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N90, N90A, Wafios-Nº
64
B H H2 LKBH 4016-N90 N90 40 25 16,5 80
2
B H H1 H2 LKBH 4016-N90A-20 N90A 40 25 20 14 80
S HKBE 16 N90 16,5 16,5KBE 16A-14 N90A 16,5 14KBE 16-20 N90 16,5 20
B H LGKB 4025-N90 N90 40 25 80GKB 4025-N90-35 N90 40 35 80
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackenhalter
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Gelöteter Klemmbacken
Type, Bestellbezeichnung Maschinentyp
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N90, N90A, Wafios-Nº
HARD MATERIAL SOLUTIONS BY CERATIZIT 32 FASTENING INDUSTRY 2018
www.ceratizit.com
Header punch, plain
Brazed nail making tool
Brazed nail making tool for D-head
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H H1 L
GKB 4025-N90A-20 N90A 40 25 20 80
GKB 4025-N90A-16 N90A 40 25 16 80
Header punch, plain
Brazed nail making tool
Brazed nail making tool for D-head
Insert for knife
Type,ordering description Machine type
Dimensions in mm
B H1 H2 L
GKB 4028-N90-16 N90 40 28 16 80
GKB 4028-N90-20 N90 40 28 20 80
GKB 4028-N90-22 N90 40 28 22 80
Header punch, plain
Brazed nail making tool
Brazed nail making tool for D-head
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
B H L ß
ZBE 30.0-N90 4226.5.1267.00 12 12 25 30°
ZBE 35.0-N90 4226.5.1227.00 12 12 25 35°
ZBE 40.1-N90 4226.5.1202.00 12 12 25 40°
ZBE 47.0-N90 4226.5.1203.00 12 12 25 47°
ZBE 60.0-N90 4226.5.1241.02 12 12 25 60°
Header punch, plain
Brazed nail making tool
Brazed nail making tool for D-head
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
Ø D L
DOP N90-122 4226.5.1170.00 20 122
DOP N90-126 4226.5.1370.00 20 126
DOP N90-130 4226.5.1351.00 20 130
DOP N90-137 4226.5.1395.01 20 137
DOP N90-144 4226.5.1379.00 20 144
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 33
fastening-industry
Type,ordering description Wafios-Nº
Dimensions in mm
∅D L
DOP N90-122-S – 20 122
DOP N90-126-S – 20 126
DOP N90-130-S – 20 130
DOP N90-137-S – 20 137
DOP N90-144-S – 20 144
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Type,ordering description Wafios-Nº
Dimensions in mm
∅D L
DOP N90-122-R – 20 122
DOP N90-126-R 4226.5.1384... 20 126
DOP N90-130-R 4226.5.1354... 20 130
DOP N90-137-R 4226.5.1388... 20 137
DOP N90-144-R 4226.5.1387... 20 144... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Type,ordering description Wafios-Nº
Dimensions in mm
∅D L
EKL 1045 4226.5.1308.01 10 45
63
B H LFHW-N80 4221.5.1310... 16 10 67,5FHW-N80 4227.5.1312... 18 12 78
Ø D H LFHA-N80 4222.5.1315... 30 15 50
Ø D LEKL 1045 4226.5.1308.01 10 45
B H LABO-N80 4221.5.1320... 21 12 12ABO-N80-N 4227.5.1304.00 Ø 20 x 19,5
HM-Festhaltewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Festhalteamboss
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Amboss
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80
HARD MATERIAL SOLUTIONS BY CERATIZIT 34 FASTENING INDUSTRY 2018
www.ceratizit.com
Tools for ND90, ND91, ND92-S
Clamping insert
Tool holder
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
B H L ß
ZBE 30.0-ND 4233.5.3920.00 16.5 28 28 30°
ZBE 40.1-ND 4233.5.3919.00 16.5 28 28 40°
ZBE 45.0-ND 4233.5.3921.00 16.5 28 28 45°
Clamping insert
Tool holder
Insert for knife
Type,ordering description Machine type
Dimensions in mm
S H
KBE 16-ND ND90, ND91, ND92-S 16.5 16.5
KBE 20-ND ND90, ND91, ND92-S 20 16.5
Clamping insert
Tool holder
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
B H L
KBH 4816-ND 4233.5.1302.00+1303.00 48.2 16.4 78.5
KBH 4820-ND 4236.5.1302.00+1303.00 48,2 16.4 78.5
Supply details: tool holder including clamping screw, but without insertOrdering example: 10 pairs of inserts 16 ∅d = 3.1+0,05; ∅D = 7.0; R = 0.3; ß = 160°
67
B H LKBH 4816-ND 4233.5.1302.00+1303.00 48,2 16,4 78,5KBH 4820-ND 4236.5.1302.00+1303.00 48,2 16,4 78,5KBH 5020-ND-H 4236.5.1306.00+1307.00 50,2 20 78,5
S HKBE 16-ND ND90, ND91, ND92-S 16,5 16,5KBE 20-ND ND90, ND91, ND92-S 20 16,5KBE 20-ND-H ND90, ND91, ND92-S 20 20
B H L βZBE 30.0-ND 4233.5.3920.00 16,5 28 28 30°ZBE 40.1-ND 4233.5.3919.00 16,5 28 28 40°ZBE 45.0-ND 4233.5.3921.00 16,5 28 28 45°
B H LASM-ND-G 4233.5.1809... 27 26 61ASM-ND-M 4233.5.3907... 23 22 48
Klemmbackenhalter
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – ND90, ND91, ND92-S
67
B H LKBH 4816-ND 4233.5.1302.00+1303.00 48,2 16,4 78,5KBH 4820-ND 4236.5.1302.00+1303.00 48,2 16,4 78,5KBH 5020-ND-H 4236.5.1306.00+1307.00 50,2 20 78,5
S HKBE 16-ND ND90, ND91, ND92-S 16,5 16,5KBE 20-ND ND90, ND91, ND92-S 20 16,5KBE 20-ND-H ND90, ND91, ND92-S 20 20
B H L βZBE 30.0-ND 4233.5.3920.00 16,5 28 28 30°ZBE 40.1-ND 4233.5.3919.00 16,5 28 28 40°ZBE 45.0-ND 4233.5.3921.00 16,5 28 28 45°
B H LASM-ND-G 4233.5.1809... 27 26 61ASM-ND-M 4233.5.3907... 23 22 48
Klemmbackenhalter
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – ND90, ND91, ND92-S
67
B H LKBH 4816-ND 4233.5.1302.00+1303.00 48,2 16,4 78,5KBH 4820-ND 4236.5.1302.00+1303.00 48,2 16,4 78,5KBH 5020-ND-H 4236.5.1306.00+1307.00 50,2 20 78,5
S HKBE 16-ND ND90, ND91, ND92-S 16,5 16,5KBE 20-ND ND90, ND91, ND92-S 20 16,5KBE 20-ND-H ND90, ND91, ND92-S 20 20
B H L βZBE 30.0-ND 4233.5.3920.00 16,5 28 28 30°ZBE 40.1-ND 4233.5.3919.00 16,5 28 28 40°ZBE 45.0-ND 4233.5.3921.00 16,5 28 28 45°
B H LASM-ND-G 4233.5.1809... 27 26 61ASM-ND-M 4233.5.3907... 23 22 48
Klemmbackenhalter
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – ND90, ND91, ND92-S
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 35
fastening-industry
Tools for NAILMASTER (N93)
Clamping insert
Tool holder
Insert for knife
Type,ordering description Wafios-Nº
Dimensions in mm
∅ H ß
ZBE 40-NM 4400-5-132040 9.75 13.45 40°
Clamping insert
Tool holder
Insert for knife
Type,ordering description
Dimensions in mm
S H
KBE 16 16.5 16.5
Clamping insert
Tool holder
Insert for knife
Type,ordering description
Dimensions in mm
B H L
KBH 3716-NM 37 16.4 56.5
67
B H LKBH 4816-ND 4233.5.1302.00+1303.00 48,2 16,4 78,5KBH 4820-ND 4236.5.1302.00+1303.00 48,2 16,4 78,5KBH 5020-ND-H 4236.5.1306.00+1307.00 50,2 20 78,5
S HKBE 16-ND ND90, ND91, ND92-S 16,5 16,5KBE 20-ND ND90, ND91, ND92-S 20 16,5KBE 20-ND-H ND90, ND91, ND92-S 20 20
B H L βZBE 30.0-ND 4233.5.3920.00 16,5 28 28 30°ZBE 40.1-ND 4233.5.3919.00 16,5 28 28 40°ZBE 45.0-ND 4233.5.3921.00 16,5 28 28 45°
B H LASM-ND-G 4233.5.1809... 27 26 61ASM-ND-M 4233.5.3907... 23 22 48
Klemmbackenhalter
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – ND90, ND91, ND92-S
67
B H LKBH 4816-ND 4233.5.1302.00+1303.00 48,2 16,4 78,5KBH 4820-ND 4236.5.1302.00+1303.00 48,2 16,4 78,5KBH 5020-ND-H 4236.5.1306.00+1307.00 50,2 20 78,5
S HKBE 16-ND ND90, ND91, ND92-S 16,5 16,5KBE 20-ND ND90, ND91, ND92-S 20 16,5KBE 20-ND-H ND90, ND91, ND92-S 20 20
B H L βZBE 30.0-ND 4233.5.3920.00 16,5 28 28 30°ZBE 40.1-ND 4233.5.3919.00 16,5 28 28 40°ZBE 45.0-ND 4233.5.3921.00 16,5 28 28 45°
B H LASM-ND-G 4233.5.1809... 27 26 61ASM-ND-M 4233.5.3907... 23 22 48
Klemmbackenhalter
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Klemmbackeneinsatz
Type, Bestellbezeichnung Maschinentyp
Maße in mm
Zwickbackeneinsatz
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Abschneidemesser
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – ND90, ND91, ND92-S
HARD MATERIAL SOLUTIONS BY CERATIZIT 36 FASTENING INDUSTRY 2018
www.ceratizit.com
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Feeder
Type,ordering description Wafios-Nº
Dimensions in mm
∅D L
EKL 1045 4226.5.1308.01 10 45
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
∅D L t α
DOP 25-NM-R NAILMASTER – 25 – 161.5
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
∅D L
DOP 25-NM NAILMASTER 25 161.5
Header punch, plain
... additional profiles upon request
Header punch, serrated
Header punch, with letters
Type,ordering description Machine type
Dimensions in mm
∅D L
DOP 25-NM-S NAILMASTER 25 161.5
63
B H LFHW-N80 4221.5.1310... 16 10 67,5FHW-N80 4227.5.1312... 18 12 78
Ø D H LFHA-N80 4222.5.1315... 30 15 50
Ø D LEKL 1045 4226.5.1308.01 10 45
B H LABO-N80 4221.5.1320... 21 12 12ABO-N80-N 4227.5.1304.00 Ø 20 x 19,5
HM-Festhaltewerkzeug
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Festhalteamboss
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Einschubklinge
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
Amboss
Type, Bestellbezeichnung Wafios-Nº
Maße in mm
NAG
ELIN
DUST
RIE
LÖSU
NGEN
FÜR
DIE
UM
FORM
TECH
NIK
NAGELINDUSTRIEPROGRAMM – N80
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 37
fastening-industry
A majority of our standard products are available from stock. A well-organised warehouse means that we can respond quickly and reliably to your order, even for bulk quantities. Thanks toour advanced supply chain management, our production capacity is flexible and able to
produce very large quantities, even in a short time frame.
You can order stock products online around the clock at our E-Techstore.
Your benefits▲ Live product availability check▲ Detailed up-to-date technical information and graphic illustrations▲ Fast delivery: orders up to 6.30 pm will leave our warehouse in Kempten, Germany, on the same day▲ Reliable delivery: we work only with the best and most reliable service providers in the sector
Supreme availability
e-techstore.comAvailable 24/7 for you
HARD MATERIAL SOLUTIONS BY CERATIZIT 38 FASTENING INDUSTRY 2018
www.ceratizit.com
Planetary die geometriesMachines for the nail rolling process are available from different companies, such as for example Enkotec, Wafios, Saspi, Prutton and Zeus. The dimensions of the roll and the geometry of the segments must be adapted in accordance with the machine.
The drawing on the next page illustrates some of the possible shapes for planetary dies. All the tools in the picture have a thickness of 3’’ (76.2 mm). TYPE 75 is the most commonly used planetary die and can be mounted on Enkotec and Zeus machines. The dies used on Wafios machines are similar but have a different thickness (82 mm) and internal diameter of the roll (5’’, 127 mm).
Based on the design of a machine’s feeding system, we can add additional features such as feeding slots or holes on the sides of the segments.
An important aspect that needs to be considered for carbide tools is the mounting system for the roll inside the machine.▲ On some machines the roll is mounted with
three wedges that press against its inside diameter. For carbide tools this solution is not recommended since it exposes the material to tensile stresses which are critical for hard metal. To avoid this kind of problem, a steel interface ring must be mounted between the roll and the wedges of the machine to distribute the stress. The mounting systems on newer machines already comprise this kind of solution so carbide tools can be mounted directly without any problems.
▲ The most common machines like those made by Zeus & Enkotec for instance already have a mounting system that is suitable for using carbide rolls.
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 39
fastening-industry
= = __,-
N Ln N " 0 0 � = +1 +I +1 N � 0 N Ln � � cYl CO " 0 = 0
= +1 +I +1 M
= � N Ln cYl 0 = 0 " +1 +I +I '°
Ln
'° = � r,; 0 = 0 " +1 +I +1
rri
cYl LI, " 0 � N
0 = 0
+1 +I +1 = 0 c:::
d 0 d OJ - � " c::: D 0
d - OJ 1/1
1 D 4-- E 1/1 0 L =
1
0 1
1 1
1
0 y N 1
1 N E w OJ 1
1 0::: c::: = LJ L '-0
OJ r---D +- N L c::: ::J - 0
D L/1 Ln QJ - �
D � �
D -� QJ _o LJ
d d c::: 0 +- D L/1
OJ f- LJ -
:=: 0 OJ QJ l/l OJ LJ N c::: c::: D c:::
LJ OJ d OJ LJ L l/l OJ � �� �0 D
f- f-
0 �-N -� 0 <[ +-er +-w -
L 0 --
+- D d d -� LJ d C: � QJ
-01 C: +-
D ::J +- 0 -
E L d 0 LJ OJ
+- LJ 1/1 01 Finitum Norne Doto QJ 01 - 0 QJ OJ
C � o_ 0 0 --
l,}.. CE RG�o! PI Z IT Dis do Bernardo Bezzola XXX 0 +-
ND L +-o_ 0 d d App,_ do d -g N E N
IE�> - L Srnlo Descrizione - L L 0 l/1 [l 0
L +-� ::J d LJ OJ d 1/1 L QJ QJ d d XXX -- 1/1 N >
D 1/1 C L OJ QJ OJ
QJ - l/1 l/1 --d L -
0 L N --C::+- L l/1 01 0 QJ Disegno Pos Mod QJ 0. +- -
d Formrrto
- c::: d +-D 0 QJ A3 XXX X X -QJ C: LJ
+-OJ
0 C L/1 QJ l/1 d
[liente XXXQJ _J
L D. � No Modifirn Norne Doto Dis [liente XXX -
==__,- N Ln N " 0 0 � = +1 +I +1 N � 0 N Ln � � cYl CO " 0 = 0
= +1 +I +1 M
= � N Ln cYl 0 = 0 " +1 +I +I '°
Ln
'° = � r,; 0 = 0 " +1 +I +1
rri
cYl LI, " 0 � N
0 = 0
+1 +I +1 = 0 c:::
d 0 d OJ - � " c::: D 0
d - OJ 1/1 D 4-- E 1/1
0 L =
0
0 y N 1 N E w
OJ 0::: c::: = LJ L '-0
OJ r---D +- N L c::: ::J 0
D QJ L/1 Ln
D 0
QJ D CD
d .0 LJ d c::: 0 +- D L/1
OJ f- LJ
0 OJ QJ 1/l
OJ LJ N c::: c::: D c:::
LJ OJ d OJ LJ L 1/l OJ
0 D f- f-
0 �
N � 0 <[ +-
er +-
w LJ 0
D +-
d d d C:
QJ C: +- 01 D ::J 0
E L d 0 LJ OJ
+- 1/1 01 Finitum QJ 01 Norne Data L 0 QJ OJ
C � D. 0 0 ·-0 +-
ND L +-
D. 0 d d
d -g N E N > L L L Srnla 0
l/1 [l 0 L +-
LJ ::J d OJ d 1/1 L
l,}.. CE RG�o! PI Z IT Dis da Bernardo Bezzola XXX
App,. da
Et� Descrizione
QJ QJ d d 1/1 N >
D 1/1 C L OJ QJ OJ
QJ • l/1 l/1
XXX d
0 L N C:: +- L l/1 01 0 QJ QJ 0. +- .
d l/l Formrrto Disegno Pos Mod
D c::: d +-
0 QJ
QJ C: LJ +-
OJ 0
C L/1 A3 XXX X X
QJ l/1 d QJ _J [liente XXXL D.
No Modifirn Norne Data Dis [liente XXX
ø 177.8
ø 190.5ø 228.6
ø 139.7
[7]
[7.5][9]
[5.5]
Model 75:
Model 155:
Standard dimensions for planetary dies
HARD MATERIAL SOLUTIONS BY CERATIZIT 40 FASTENING INDUSTRY 2018
www.ceratizit.com
Tool mounting
Exclusively use KBE 16ND and KBE 20 ND inserts with chamfered rear side.
Carefully position carbide insert as shown in the picture
Press in manually.
Position with soft hammer (plastic, copper, ...) in the seat
Tool is ready for application in production
Correct mounting Incorrect mounting
Axial displacemente.g.: KBE 12
Height displacemente.g.: ZB 40.1 N90
Angle displacemente.g.: ZBE 40
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 41
fastening-industry
HARD MATERIAL SOLUTIONS BY CERATIZIT 42 FASTENING INDUSTRY 2018
www.ceratizit.com
Extract from our product portfolio
Individual carbide solutions for your application
Tools for metal forming High-performance components for tool construction
Hard Material Solutions by CERATIZITWear protection for all applications and industries
CERATIZIT is a high-tech engineering group specialised in tooling and hard material technologies.
Premium hot rollsmade of cemented carbide and ceramic
2018.V1 EN
www.ceratizit.com
Tooling the Future
CERATIZIT is a high-tech engineering groupspecialised in tooling and hard material technologies.
Solutions for theplastics industry
2017.V1 EN
www.ceratizit.com
Tooling the Future
CERATIZIT is a high-tech engineering groupspecialized in tooling and hard material technologies.
2017.V1 EN
www.ceratizit.com
CERATIZIT is a high-tech engineering group specialized in tooling and hard material technologies.
Tooling the Future
Premium blanksfor rotary cutters
2017.V1 EN
www.ceratizit.com
CERATIZIT is a high-tech engineering group specialized in tooling and hard material technologies.
Tooling the Future.
Drawing Tools & Drawing Nibs
HARD MATERIAL SOLUTIONS BY CERATIZIT 30 TOOL AND DIE INDUSTRY 2016
www.ceratizit.com/tool-and-die-industry
ACustomer-specific carbide solutions for your application A Tools for metal forming AHigh-performance components for the tool and die industry
Hard Material Solutions by CERATIZITWear protection for all applications and industries
Our product portfolio
Specialist for customised blanks and semi- finished products
2016.V1 EN
www.ceratizit.com
Tooling the Future.
CERATIZIT is a high-tech engineering group in tooling and hard materials technology.
2016.V1 ENWater-jetcuttingCarbide focusing tubes
www.ceratizit.com
CERATIZIT is a high-tech engineering group in tooling and hard materials technology.
Tooling the Future.www.ceratizit.com
Tooling the Future.
Solutions for the tool and die industry
CERATIZIT is a high-tech engineering group in tooling and hard materials technology.
2016.V1 EN
Rotary forgingPremium hammers and mandrels
CERATIZIT is a high-tech engineering group specialised in tooling and hard material technologies.
2018 EN
HARD MATERIAL SOLUTIONS BY CERATIZIT FASTENING INDUSTRY 2018 43
fastening-industry
Facts and figures
> 9,000employees
> 200employees in R&D
1 headquartersMamer (Luxembourg)
> 100,000different products
> 10innovation awards
> 1,000patents and utility models
30 %of products developed in the last 5 years
34production sites
> 70sales subsidiaries
The CERATIZIT Group
For over 95 years, CERATIZIT has been a pioneer developing exceptional hard material products for cutting tools and wear protection.
The privately owned company, based in Mamer, Luxembourg, develops and manufactures highly specialised carbide cutting tools, inserts and rods made of hard materials as well as wear parts.
The CERATIZIT Group is the global market leader in several wear part application areas, and successfully develops new types of cemented carbide, cermet and ceramic grades which are used for instance in the wood, metal and stone working industries.
7003
099
M
A-P
RO
-069
2-E
N-0
3/17
Tech
nisc
he Ä
nder
unge
n, P
rodu
ktio
nsve
rbes
seru
ngen
vor
beha
lten.
Headquarters
CERATIZIT S.A. LU-8232 MamerT. +352 31 20 85-1E. info@ceratizit.com
www.ceratizit.com
Sales
AustriaCERATIZIT Austria GmbHAT-6600 ReutteT. +43 5672 200-0E. info.austria@ceratizit.com
BrazilCERATIZIT América Latina Ltda.BR-Campinas, São Paulo 13069-310 / BrazilT. +55 19 3115 9500E. info.americalatina@ceratizit.com
BulgariaCERATIZIT Bulgaria AGBG-5301 GabrovoT. +359 66 812 206E. info.bulgaria@ceratizit.com
China CB-CERATIZIT XiamenCN-361022 Xiamen T. +86 592 666 1000 E. sales@cbceratizit.com
Czech Republic /Slovak RepublicCERATIZIT Office Czech RepublicCZ-594 01 Velké MeziříčíT. +420 566 520 341E. info.czechrepublic@ceratizit.com
France/Luxembourg/BelgiumCERATIZIT Luxembourg S.à r.l. LU-8232 MamerT. +352 31 20 85-1E. info@ceratizit.com
GermanyCERATIZIT Empfingen GmbHDE-72186 EmpfingenT. +49 7485 99802 0E. info.empfingen@ceratizit.com
CERATIZIT Hitzacker GmbHDE-29456 HitzackerT. +49 5862 969 100E. info.hitzacker@ceratizit.com
Great BritainCERATIZIT Office UK UK-Sheffield S9 1XUToll Free 0800 048 4877 / 4878T. +44 1925 261 161E. info.uk@ceratizit.com
HungaryCERATIZIT Office HungaryHU-1138 BudapestT. +36 1 437 0930E. info.hungary@ceratizit.com
IndiaCERATIZIT India Pvt. Ltd.IN-Bengaluru 560099T. +91 80 4043 1262E. ctindia.south@ceratizit.com
CERATIZIT India Pvt. Ltd.IN-Chennai 600037T. +91 44 4269 4350E. ctindia.south@ceratizit.com
CERATIZIT India Pvt. Ltd.IN-Coimbatore 641009T. +91 4224 273 373E. ctindia.south@ceratizit.com
CERATIZIT India Pvt. Ltd.IN-Gurgaon 122002T. +91 124 4018 481E. ctindia.north@ceratizit.com
CERATIZIT India Pvt. Ltd.IN-Pune 411018T. +91 20 6529 0628E. ctindia.west@ceratizit.com
IndonesiaCB-CERATIZIT IndonesiaID-17530 BekasiT. +62-21-2961-2351
ItalyCERATIZIT Como S.p.AIT-22040 Alserio (CO)T. +39 031 6349 211E. info.como@ceratizit.com
JapanCERATIZIT Japan Co., Ltd. JP-3-13-9, Mizuho, Suruga-kuT. +81 54 268 1060 E. info.japan@ceratizit.com
MexicoCERATIZIT México, S.A. de C.V.MX-76040 Querétaro, QROT. +52 442 225 9173E. info.mexico@ceratizit.com
NetherlandsCERATIZIT Nederland B.V.NL-4707 AT RoosendaalT. +31 165 55 08 00E. info.nederland@ceratizit.com
PolandCERATIZIT Office PolandPL-30-443 KrakówT. +48 12 252 8591E. info.polska@ceratizit.com
Spain / PortugalCERATIZIT Ibérica S.L.ES-28660 Boadilla del Monte (Madrid)T. +34 91 351 0609E. info.iberica@ceratizit.com
SwitzerlandCERATIZIT Schweiz AGCH-Orpund 2552T. +41 32 344 93 93
TaiwanCB-CERATIZIT TamsuiTW-25152-TamsuiT. +886 2 2622 1668
TurkeyCERATIZIT TurkeyTR-34870 Kartal, İstanbulT. +90 216 353 66 43E. info.turkey@ceratizit.com
USA / CanadaCERATIZIT USA, Inc.US-Warren, MI 48089-1833Toll free +1-800-783-2280T. +1-586-759-2280E. info.usa@ceratizit.com