Post on 29-May-2020
transcript
800.950.8277 | WWW.EAGLE-TOOL.COM
Drills, Taps, Dies, Reamers, Saw Blades, Carbide Burrs and More!Annular Cutters, Cutting Tool Alteration Services
2019/2020 PARTS CATALOG
Dear Valued Customer,
Eagle/Taptek is a veteran-owned company that has been providing high-quality tools to customers like you since 1972. Our mission is “Growing together to deliver superior products.” Here are the ways we can help your company grow by being your solution to all your cutting tool needs:
• We have a large inventory of high-quality products immediately available for you based in Houston, Texas. We stock both domestic and imported products: The Eagle brand is manufactured in the USA and the Taptek brand represents our imported inventory.
• We have highly competitive pricing.
• We can also take care of your special tool needs with an in-house grinding facility. Eagle/Taptek provides services for High Speed Steel, Cobalt and Carbide cutting tool alterations.
• We pride ourselves on having a knowledgeable staff ready to answer any questions that our clients might have. Eagle/Taptek can help you outside our normal business hours as well with a 24/7 call out service. Please give us a call if you have an emergency outside our normal business hours at 281.702.2911.
We designed this catalog to be functional and easy to use. Colored tabs identify each section of the catalog and each section has its own table of contents. A complete alphabetical index is in the back of the catalog. Our catalog is available to view online at www.eagle-tool.com.
We look forward to helping your business grow with our reliable customer service, highly competitive pricing, and readily available stock.
Thank you,
Harry Hageney
Eagle/Taptek President
Terms and Conditions:
1. No minimum orders.
2. Free freight on orders of $300.00 or more.
3. Resale Certificate is required.
4. F.O.B. Eagle/Taptek Cutting Tools (Houston, Texas).
5. Returned Goods: All items must be unused and in original condition. Merchandise returned due to customer error is subject to a restocking fee.
6. Claims: All claims must be made within 10 days after the receipt of the merchandise. Any damages must be claimed through the commercial carrier.
7. For lost or damaged shipments notify your local UPS or FedEx office immediately. Advise us so we can reship your tools and/or place a claim. Please keep the damaged tools and container until informed to dispose.
3
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
TABL
E OF
CON
TENT
S
3
Drill Sets, Jobber Length Drills, Taper Length Drills, Screw Machine Length Drills, Reduced Shank Drills, Aircraft Extension Drills, Extra Long Drills, Taper Shank Drills, Morse Taper Sleeves and Extension Sockets, Drill Drifts, Hammer Drills, Carbide, Tipped Masonry Drills, Core Drills, Carbide Tipped Drills, Solid Carbide Drills, Combined Drills/Countersinks, Spotting Drills, Body Drills, Step Drills, Countersinks, Counterbores and Pilots
Hand Taps, Spiral Pointed Taps, Special Thread Taps, Combined Tap and Drills, Pipe Taps, Pulley Taps
Split Dies–Standard Round Adjustable, Split Dies–Metric, Split Dies–Left Hand, Split Dies–Special Thread, Pipe Dies, Rethreading Dies, Tap and Die Sets, Tap and Reamer Wrenches, Round Die Stocks
Chucking Reamers, Expansion Chucking Reamers, Jobber Reamers, Taper Pipe Reamers, Taper Pin Reamers, Shell Reamers, Shell Reamer Arbors, Hand Reamers, Hand Expansion Reamers, Adjustable Hand Reamers, Bridge Reamers, Aligning Reamers
Carbide Burrs–Standard Length, Carbide Burr Box Set, Miniature Carbide Burrs, Carbide Burrs–Extra Long, Carbide Burrs for Aluminum
Hole Saws, Hole Saw Kits, Hole Saw Mandrels, Spade Wood Bits, TCT Cutters, Portable Band Saw Blades, Hack Saw Blades, Reciprocating Saw Blades, Shop Rolls, Screw Extractors, Cutting Fluids, Annular Cutters
DRILLSTAPS
DIESREAM
ERSBURRS
OTHER
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRILLS
HSS Double End End Mills - Two Flute 4 Flute, HSS Single End End Mills for Aluminum – Regular – Long - Extra Long Lengths, HSS Multi Flute End Mills Regular Length, HSS Multi Flute End Mills Long Length - Ball End, Solid Carbide Single End Mills - 2 Flute - 4 Flute Square End - Ball End, Solid Carbide Double End Mills – 2 Flute – 4 Flute Square End – Ball End
END MILLS
4Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
4
Fractional, Number, Wire, and Metric Sizes Recommended Tap Drill Sizes for approximately 75% Thread
DECIMAL EQUILAVENT CHART
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DECIMAL EQUIVALENTS
0.3mm0.32mm 800.35mm 790.38mm 1/640.4mm 780.42mm0.45mm 770.48mm0.5mm 76 750.55mm 740.6mm 730.62mm 720.65mm 710.7mm 70 690.75mm 68 1/320.8mm 67 660.85mm 650.9mm 64 630.95mm 62 611.0mm 60 591.05mm 58 571.1mm1.15mm 56 3/641.2mm1.25mm1.3mm 551.35mm 541.4mm1.45mm1.5mm 531.55mm 1/161.6mm 521.65mm1.7mm 51
1.75mm 501.8mm1.85mm 491.9mm 481.95mm 5/64 472.0mm2.05mm 46 452.1mm2.15mm 442.2mm2.25mm 432.3mm2.35mm 42 3/322.4mm 412.45mm 402.5mm 39 382.6mm 372.7mm 36 7/64 352.8mm 34 332.9mm 323.0mm 313.1mm 1/83.2mm 303.3mm3.4mm 293.5mm 28 9/643.6mm 273.7mm 26 253.8mm 243.9mm 23 5/32 224.0mm 21 20
4.1mm4.2mm 194.3mm 18 11/64 174.4mm 164.5mm 154.6mm 144.7mm 13 3/164.8mm 12 114.9mm 10 95.0mm 85.1mm 7 13/64 65.2mm 55.3mm 45.4mm 35.5mm 7/325.6mm 25.7mm 15.8mm5.9mm A 15/646.0mm B6.1mm C6.2mm D6.3mm 1/4. E6.4mm6.5mm F6.6mm G6.7mm 17/64 H6.8mm6.9mm I7.0mm J7.1mm K 9/327.2mm7.3mm
L7.4mm M7.5mm 19/647.6mm N7.7mm7.8mm7.9mm 5/168.0mm O8.1mm8.2mm P8.3mm 21/648.4mm Q8.5mm8.6mm R8.7mm 11/328.8mm S8.9mm9.0mm T9.1mm 23/649.2mm9.3mm U9.4mm9.5mm 3/8 V9.6mm9.7mm9.8mm W9.9mm 25/6410.0mm X10.2mm Y 13/32 Z10.5mm 27/6410.8mm11.0mm 7/1611.2mm11.5mm 29/6411.8mm 15/3212.0mm12.2mm 31/6412.5mm 1/212.8mm13.0mm
DRILL DECIMAL DRILL DECIMAL DRILL DECIMAL DRILL DECIMAL DRILL DECIMAL SIZE INCHES SIZE INCHES SIZE INCHES SIZE INCHES SIZE INCHES
.0118
.0126
.0135
.0138
.0145
.0150
.0156
.0157
.0160
.0165
.0177
.0180
.0189
.0197
.0200
.0210
.0217
.0225
.0236
.0240
.0244
.0250
.0256
.0260
.0276
.0280
.0292
.0295
.0310
.0312
.0315
.0320
.0330
.0335
.0350
.0354
.0360
.0370
.0374
.0380
.0390
.0394
.0400
.0410
.0413
.0420
.0430
.0433
.0453
.0465
.0469
.0472
.0492
.0512
.0520
.0531
.0550
.0551
.0571
.0591
.0595
.0610
.0625
.0630
.0635
.0650
.0669
.0670
.0689
.0700
.0709
.0728
.0730
.0748
.0760
.0768
.0781
.0785
.0787
.0807
.0810
.0820
.0827
.0846
.0860
.0866
.0886
.0890
.0906
.0925
.0935
.0938
.0945
.0960
.0965
.0980
.0984
.0995
.1015
.1024
.1040
.1063
.1065
.1094
.1100
.1102
.1110
.1130
.1142
.1160
.1181
.1200
.1220
.1250
.1260
.1285
.1299
.1339
.1360
.1378
.1405
.1406
.1417
.1440
.1457
.1470
.1495
.1496
.1520
.1535
.1540
.1562
.1570
.1575
.1590
.1610
.1614
.1654
.1660
.1693
.1695
.1719
.1730
.1732
.1770
.1772
.1800
.1811
.1820
.1850
.1875
.1890
.1910
.1929
.1935
.1960
.1969
.1990
.2008
.2010
.2031
.2040
.2047
.2055
.2087
.2090
.2126
.2130
.2165
.2188
.2205
.2210
.2244
.2280
.2283
.2323
.2340
.2344
.2362
.2380
.2402
.2420
.2441
.2460
.2480
.2500
.2520
.2559
.2570
.2598
.2610
.2638
.2656
.2660
.2677
.2717
.2720
.2756
.2770
.2795
.2810
.2812
.2835
.2874
.2900
.2913
.2950
.2953
.2969
.2992
.3020
.3031
.3071
.3110
.3125
.3150
.3160
.3189
.3228
.3230
.3268
.3281
.3307
.3320
.3346
.3386
.3390
.3425
.3438
.3465
.3480
.3504
.3543
.3580
.3583
.3594
.3622
.3661
.3680
.3701
.3740
.3750
.3770
.3780
.3819
.3858
.3860
.3898
.3906
.3937
.3970
.4016
.4040
.4062
.4130
.4134
.4219
.4252
.4331
.4375
.4409
.4528
.4531
.4646
.4688
.4724
.4803
.4844
.4921
.5000
.5039
.5118
.5156
.5197
.5312
.5315
.5433
.5469
.5512
.5610
.5625
.5709
.5781
.5807
.5906
.5938
.6004
.6094
.6102
.6201
.6250
.6299
.6398
.6406
.6496
.6562
.6594
.6693
.6719
.6791
.6875
.6890
.7031
.7087
.7188
.7283
.7344
.7480
.7500
.7656
.7677
.7812
.7874
.7969
.8071
.8125
.8268
.8281
.8438
.8465
.8594
.8661
.8750
.8858
.8906
.9055
.9062
.9219
.9252
.9375
.9449
.9531
.9646
.9688
.9843
.98441.0000
33/6413.2mm 17/3213.5mm13.8mm 35/6414.0mm14.25mm 9/1614.5mm 37/6414.75mm15.0mm 19/3215.25mm 39/6415.5mm15.75mm 5/816.0mm16.25mm 41/6416.5mm 21/3216.75mm17.0mm 43/6417.25mm 11/1617.5mm 45/6418.0mm 23/3218.5mm 47/6419.0mm 3/4 49/6419.5mm 25/3220.0mm 51/6420.5mm 13/1621.0mm 53/64 27/3221.5mm 55/6422.0mm 7/822.5mm 57/6423.0mm 29/32 59/6423.5mm 15/1624.0mm 61/6424.5mm 31/3225.0mm 63/64 1"
METRIC - GREEN FRACTIONAL - RED WIRE GAGE - PURPLE LETTER SIZE - BLUE
5
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
5
DRILLS
Drill Buddy ................................................................................. 6Jobber Length Drills ........................................................... 2–27Taper Length Drills ............................................................ 28–30Screw Machine Length Drills ............................................ 31–40Reduced Shank Drills ....................................................... 41–42Aircraft Extension Drills .......................................................... 43Extra Long Drills ............................................................... 44–52Taper Shank Drills ............................................................. 53–60Core Drills ......................................................................... 61–62Morse Taper Sleeves and Extension Sockets ........................ 63Drill Drifts ................................................................................ 63Hammer Drills .......................................................................... 64Carbide Tipped Masonry Drills ................................................ 65Core Bits .................................................................................. 66Carbide Tipped Drills ......................................................... 67–69Solid Carbide Drills .......................................................... 70–72Combined Drills/Countersinks ................................................ 73Spotting Drills ......................................................................... 74Body Drills .............................................................................. 74Step Drills ............................................................................... 74Countersinks ........................................................................... 75Counterbores and Pilots .......................................................... 76
TABL
E OF
CON
TENT
S
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
6Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS DRILL BUDDY29 Piece Set
Part # Type Color Length Origin
TAC40DB29-I JOBBER HIGH SPEED STEEL 118 POINT 1/16-1/2x64TH IMPORTTAP50DBD29-I JOBBER BLACK & GOLD 135 POINT 1/16-1/2x64TH IMPORTTAP50-DBC29-I JOBBER COBALT 135 POINT 1/16-1/2x64TH IMPORTTAP50-DB29-D - HIGH SPEED STEEL 118 POINT 1/16-1/2x64TH USA
TAP50-DBD29-D - BLACK & GOLD 135 POINT 1/16-1/2x64TH USATAP50-DBC29-D - COBALT 135 POINT 1/16-1/2x64TH USA
7
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Set No. Description OAL
J13 HSS, 118º Point 1-1/2HD13 HSS, 135º Split Point 1-3/4C13 Cobalt, 135º Split Point 2D13 Black & Gold 2-1/4
Set No. Description OAL
J15 HSS, 118º Point 1-1/2HD15 HSS, 135º Split Point 1-3/4C15 Cobalt, 135º Split Point 2D15 Black & Gold 2-1/4
Set No. Description OAL
J21 HSS, 118º Point 1-1/2HD21 HSS, 135º Split Point 1-3/4C21 Cobalt, 135º Split Point 2D21 Black & Gold 2-1/4
Set No. Description OAL
J29 HSS, 118º Point 1-1/2HD29 HSS, 135º Split Point 1-3/4C29 Cobalt, 135º Split Point 2D29 Black & Gold 2-1/4
Set No. Description OAL
J115 HSS, 118º Point 1-1/2HD115 HSS, 135º Split Point 1-3/4C115 Cobalt, 135º Split Point 2
DRILL SETSJobber Length Drill Sets
• Series TAP50 - USA• Series TAC40 - Import
15 Piece Set: 1/16” - 1/2” by 32nds13 Piece Set: 1/16” - 1/4” by 64ths
29 Piece Set: 1/16” - 1/2” by 64ths21 Piece Set: 1/16” - 3/8” by 64ths
115 Piece Set: 1/16” - 1/2” by 64ths, A-Z, 1-60
8Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Set No. Description OAL
JSD8 HSS, 118º Point 1-1/2JSD8-SP HSS, 135º Split Point 1-3/4JSD8-C Cobalt 2
Set No. Description OAL
JSD33 HSS, 118º Point 1-1/2JSD33-SP HSS, 135º Split Point 1-3/4JSD33-C Cobalt 2
Set No. Description OAL
KW90-4352
Set Includes: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 7/32, 1/4, 5/16, 3/8
1-1/2
Set No. Description OAL
KW90-14693 double-end screwdriver bits 7 nutdrivers
1-1/2
DRILL SETS
• Silver and Deming Sets Series 1080 — USA Series 1090 — Import
32 Piece Set: 33/64” - 1 by 64ths8 Piece Set: 9/16” - 1 by 16ths
• Pilot Drill Point Bits • Double End Drill Bits & Nut Drivers
10 Piece Set13 Piece Set • HSS
9
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
JOBBER LENGTH DRILLSGeneral Purpose, 118o Point
• General Purpose Drills suitable for most applications.• All drills are ground from the solid.
OXIDE Finish: Provides high resistance to abrasion. Also, helps to reduce the tendency of soft material to load on the drill.
BRIGHT Finish: Works well in a wide variety of materials. Polished flutes help with chip evacuation.
TiN Coated: Offers outstanding wear resistance, reduces friction and prevents galling. Increased lubricity and chip flow provide better surface finish and reduced torque.
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1/64 .0156 3/16 3/4 121/32 .0312 1/2 1-3/8 123/64 .0469 3/4 1-3/4 121/16 .0625 7/8 1-7/8 125/64 .0781 1 2 123/32 .0938 1-1/4 2-1/4 127/64 .1094 1-1/2 2-5/8 121/8 .1250 1-5/8 2-3/4 129/64 .1406 1-3/4 2-7/8 125/32 .1562 2 3-1/8 1211/64 .1719 2-1/8 3-1/4 123/16 .1875 2-5/16 3-1/2 1213/64 .2031 2-7/16 3-5/8 127/32 .2188 2-1/2 3-3/4 1215/64 .2344 2-5/8 3-7/8 121/4 .2500 2-3/4 4 12
17/64 .2656 2-7/8 4-1/8 129/32 .2812 2-15/16 4-1/4 619/64 .2969 3-1/16 4-3/8 65/16 .3125 3-3/16 4-1/2 621/64 .3281 3-5/16 4-5/8 611/32 .3438 3-7/16 4-3/4 623/64 .3594 3-1/2 4-7/8 6
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
3/8 .3750 3-5/8 5 625/64 .3906 3-3/4 5-1/8 613/32 .4062 3-7/8 5-1/4 627/64 .4219 3-15/16 5-3/8 67/16 .4375 4-1/16 5-1/2 629/64 .4531 4-3/16 5-5/8 615/32 .4688 4-5/16 5-3/4 631/64 .4844 4-3/8 5-7/8 61/2 .5000 4-1/2 6 6
33/64 .5156 4-13/16 6-5/8 117/32 .5312 4-13/16 6-5/8 135/64 .5469 4-13/16 6-5/8 19/16 .5625 4-13/16 6-5/8 137/64 .5781 4-13/16 6-5/8 119/32 .5938 5-3/16 7-1/8 139/64 .6094 5-3/16 7-1/8 15/8 .6250 5-3/16 7-1/8 1
41/64 .6406 5-3/16 7-1/8 121/32 .6562 5-3/16 7-1/8 143/64 .6719 5-5/8 7-5/8 111/16 .6875 5-5/8 7-5/8 123/32 .7188 5-5/8 7-5/8 13/4 .7500 5-5/8 7-5/8 1
Series J100 • Fractional Sizes (USA)Series TAC40 • Fractional Sizes (Import)
10Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS JOBBER LENGTH DRILLSGeneral Purpose, 118o Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 2-5/8 3-7/8 12
B .2380 2-3/4 4 12
C .2420 2-3/4 4 12
D .2460 2-3/4 4 12
E .2500 2-3/4 4 12
F .2570 2-7/8 4-1/8 12
G .2610 2-7/8 4-1/8 12
H .2660 2-7/8 4-1/8 12
I .2720 2-7/8 4-1/8 6
J .2770 2-7/8 4-1/8 6
K .2810 2-15/16 4-1/4 6
L .2900 2-15/16 4-1/4 6
M .2950 3-1/16 4-3/8 6
N .3020 3-1/16 4-3/8 6
O .3160 3-3/16 4-1/2 6
P .3230 3-5/16 4-5/8 6
Q .3320 3-7/16 4-3/4 6
R .3390 3-7/16 4-3/4 6
S .3480 3-1/2 4-7/8 6
T .3580 3-1/2 4-7/8 6
U .3680 3-5/8 5 6
V .3770 3-5/8 5 6
W .3860 3-3/4 5-1/8 6
X .3970 3-3/4 5-1/8 6
Y .4040 3-7/8 5-1/4 6
Z .4130 3-7/8 5-1/4 6
Series J102 • Letter Sizes (USA)Series TAC40 • Letter Sizes (Import)
11
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
JOBBER LENGTH DRILLSGeneral Purpose, 118o Point
Size Decimal Equiv.
Flute Length OAL
1 .2280 2-5/8 3-7/82 .2210 2-5/8 3-7/83 .2130 2-1/2 3-3/44 .2090 2-1/2 3-3/45 .2055 2-1/2 3-3/46 .2040 2-1/2 3-3/47 .2010 2-7/16 3-5/88 .1990 2-7/16 3-5/89 .1960 2-7/16 3-5/8
10 .1935 2-7/16 3-5/811 .1910 2-5/16 3-1/212 .1890 2-5/16 3-1/213 .1850 2-5/16 3-1/214 .1820 2-3/16 3-3/815 .1800 2-3/16 3-3/816 .1770 2-3/16 3-3/817 .1730 2-3/16 3-3/818 .1695 2-1/8 3-1/419 .1660 2-1/8 3-1/420 .1610 2-1/8 3-1/421 .1590 2-1/8 3-1/422 .1570 2 3-1/823 .1540 2 3-1/824 .1520 2 3-1/825 .1495 1-7/8 326 .1470 1-7/8 327 .1440 1-7/8 328 .1405 1-3/4 2-7/829 .1360 1-3/4 2-7/830 .1285 1-5/8 2-3/431 .1200 1-5/8 2-3/432 .1160 1-5/8 2-3/433 .1130 1-1/2 2-5/8
Size Decimal Equiv.
Flute Length OAL
34 .1110 1-1/2 2-5/835 .1100 1-1/2 2-5/836 .1065 1-7/16 2-1/237 .1040 1-7/16 2-1/238 .1015 1-7/16 2-1/239 .0995 1-3/8 2-3/840 .0980 1-3/8 2-3/841 .0960 1-3/8 2-3/842 .0935 1-1/4 2-1/443 .0890 1-1/4 2-1/444 .0860 1-1/8 2-1/845 .0820 1-1/8 2-1/846 .0810 1-1/8 2-1/847 .0785 1 248 .0760 1 249 .0730 1 250 .0700 1 251 .0670 1 252 .0635 7/8 1-7/853 .0595 7/8 1-7/854 .0550 7/8 1-7/855 .0520 7/8 1-7/856 .0465 3/4 1-3/457 .0430 3/4 1-3/458 .0420 11/16 1-5/859 .0410 11/16 1-5/860 .0400 11/16 1-5/861 .0390 11/16 1-5/862 .0380 5/8 1-1/263 .0370 5/8 1-1/264 .0360 5/8 1-1/265 .0350 5/8 1-1/266 .0330 1/2 1-3/8
Size Decimal Equiv.
Flute Length OAL
67 .0320 1/2 1-3/868 .0310 1/2 1-3/869 .0292 1/2 1-3/870 .0280 3/8 1-1/471 .0260 3/8 1-1/472 .0250 5/16 1-1/873 .0240 5/16 1-1/874 .0225 1/4 175 .0210 1/4 176 .0200 3/16 7/877 .0180 3/16 7/878 .0160 3/16 7/879 .0145 1/8 3/480 .0135 1/8 3/481 .0130 3/32 3/482 .0125 3/32 3/483 .0120 3/32 3/484 .0115 3/32 3/485 .0110 5/64 3/486 .0105 5/64 3/487 .0100 5/64 3/488 .0095 5/64 3/489 .0091 1/16 3/490 .0087 1/16 3/491 .0083 1/16 3/492 .0079 1/16 3/493 .0075 1/16 3/494 .0071 1/16 3/495 .0067 1/16 3/496 .0063 3/64 3/497 .0059 3/64 3/4
Series J102 • Wire Gauge Sizes (USA)Series TAC40 • Wire Gauge Sizes (Import)
12Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Series RF100 • Fractional Sizes (Import)Medium Production • Black, ANSI Standard
Size Decimal Equiv.
Flute Length OAL Part
No.
1/64 .0156 3/16 3/4 RF100-001-I1/32 .0312 1/2 1-3/8 RF100-002-I3/64 .0469 3/4 1-3/4 RF100-003-I1/16 .0625 7/8 1-7/8 RF100-004-I5/64 .0781 1 2 RF100-005-I3/32 .0938 1-1/4 2-1/4 RF100-006-I7/64 .1094 1-1/2 2-5/8 RF100-007-I1/8 .1250 1-5/8 2-3/4 RF100-008-I9/64 .1406 1-3/4 2-7/8 RF100-009-I5/32 .1562 2 3-1/8 RF100-010-I11/64 .1719 2-1/8 3-1/4 RF100-011-I3/16 .1875 2-5/16 3-1/2 RF100-012-I
13/64 .2031 2-7/16 3-5/8 RF100-013-I7/32 .2188 2-1/2 3-3/4 RF100-014-I15/64 .2344 2-5/8 3-7/8 RF100-015-I
1/4 .2500 2-3/4 4 RF100-016-I17/64 .2656 2-7/8 4-1/8 RF100-017-I9/32 .2812 2-15/16 4-1/4 RF100-018-I
19/64 .2969 3-1/16 4-3/8 RF100-019-I5/16 .3125 3-3/16 4-1/2 RF100-020-I
21/64 .3281 3-5/16 4-5/8 RF100-021-I11/32 .3438 3-7/16 4-3/4 RF100-022-I23/64 .3594 3-1/2 4-7/8 RF100-023-I
3/8 .3750 3-5/8 5 RF100-024-I25/64 .3906 3-3/4 5-1/8 RF100-025-I13/32 .4062 3-7/8 5-1/4 RF100-026-I27/64 .4219 3-15/16 5-3/8 RF100-027-I7/16 .4375 4-1/16 5-1/2 RF100-028-I
29/64 .4531 4-3/16 5-5/8 RF100-029-I15/32 .4688 4-5/16 5-3/4 RF100-030-I31/64 .4844 4-3/8 5-7/8 RF100-031-I
1/2 .5000 4-1/2 6 RF100-032-1
JOBBER LENGTH DRILLSGeneral Purpose, 118o Point
• Fractional Roll Forged Jobber Drills.• Black Finish, H.S. Steel ANSI Standards
13
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Decimal Equiv.
Flute Length OAL Pkg Qty
3/64 .0469 3/4 1-3/4 121/16 .0625 7/8 1-7/8 125/64 .0781 1 2 123/32 .0938 1-1/4 2-1/4 127/64 .1094 1-1/2 2-5/8 121/8 .1250 1-5/8 2-3/4 12
9/64 .1406 1-3/4 2-7/8 125/32 .1562 2 3-1/8 1211/64 .1719 2-1/8 3-1/4 123/16 .1875 2-5/16 3-1/2 12
13/64 .2031 2-7/16 3-5/8 127/32 .2188 2-1/2 3-3/4 12
15/64 .2344 2-5/8 3-7/8 121/4 .2500 2-3/4 4 12
17/64 .2656 2-7/8 4-1/8 129/32 .2812 2-15/16 4-1/4 6
19/64 .2969 3-1/16 4-3/8 65/16 .3125 3-3/16 4-1/2 621/64 .3281 3-5/16 4-5/8 611/32 .3438 3-7/16 4-3/4 623/64 .3594 3-1/2 4-7/8 6
3/8 .3750 3-5/8 5 625/64 .3906 3-3/4 5-1/8 613/32 .4062 3-7/8 5-1/4 627/64 .4219 3-15/16 5-3/8 67/16 .4375 4-1/16 5-1/2 629/64 .4531 4-3/16 5-5/8 615/32 .4688 4-5/16 5-3/4 631/64 .4844 4-3/8 5-7/8 6
1/2 .5000 4-1/2 6 6
Size Decimal Equiv.
Flute Length OAL Pkg Qty
A .2340 2-5/8 3-7/8 12B .2380 2-3/4 4 12C .2420 2-3/4 4 12D .2460 2-3/4 4 12E .2500 2-3/4 4 12F .2570 2-7/8 4-1/8 12G .2610 2-7/8 4-1/8 12H .2660 2-7/8 4-1/8 12I .2720 2-7/8 4-1/8 6J .2770 2-7/8 4-1/8 6K .2810 2-15/16 4-1/4 6L .2900 2-15/16 4-1/4 6M .2950 3-1/16 4-3/8 6N .3020 3-1/16 4-3/8 6O .3160 3-3/16 4-1/2 6P .3230 3-5/16 4-5/8 6Q .3320 3-7/16 4-3/4 6R .3390 3-7/16 4-3/4 6S .3480 3-1/2 4-7/8 6T .3580 3-1/2 4-7/8 6U .3680 3-5/8 5 6V .3770 3-5/8 5 6W .3860 3-3/4 5-1/8 6X .3970 3-3/4 5-1/8 6Y .4040 3-7/8 5-1/4 6Z .4130 3-7/8 5-1/4 6
JOBBER LENGTH DRILLSHeavy Duty, 135o Split Point
• High Speed Steel, BLACK Oxide
Series H200 • Fractional Sizes (USA) Series H202 • Letter Sizes (USA)
WE ALSOOFFER SPECIAL
SIZES ANDCUTTING TOOL
ALTERATIONSERVICES.
14Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL Pkg Qty
1 .2280 2-5/8 3-7/8 122 .2210 2-5/8 3-7/8 123 .2130 2-1/2 3-3/4 124 .2090 2-1/2 3-3/4 125 .2055 2-1/2 3-3/4 126 .2040 2-1/2 3-3/4 127 .2010 2-7/16 3-5/8 128 .1990 2-7/16 3-5/8 129 .1960 2-7/16 3-5/8 12
10 .1935 2-7/16 3-5/8 1211 .1910 2-5/16 3-1/2 1212 .1890 2-5/16 3-1/2 1213 .1850 2-5/16 3-1/2 1214 .1820 2-3/16 3-3/8 1215 .1800 2-3/16 3-3/8 1216 .1770 2-3/16 3-3/8 1217 .1730 2-3/16 3-3/8 1218 .1695 2-1/8 3-1/4 1219 .1660 2-1/8 3-1/4 1220 .1610 2-1/8 3-1/4 1221 .1590 2-1/8 3-1/4 1222 .1570 2 3-1/8 1223 .1540 2 3-1/8 1224 .1520 2 3-1/8 1225 .1495 1-7/8 3 1226 .1470 1-7/8 3 1227 .1440 1-7/8 3 1228 .1405 1-3/4 2-7/8 1229 .1360 1-3/4 2-7/8 1230 .1285 1-5/8 2-3/4 12
JOBBER LENGTH DRILLSHeavy Duty, 135o Split Point
• High Speed Steel, BLACK Oxide
Size Decimal Equiv.
Flute Length OAL Pkg Qty
31 .1200 1-5/8 2-3/4 1232 .1160 1-5/8 2-3/4 1233 .1130 1-1/2 2-5/8 1234 .1110 1-1/2 2-5/8 1235 .1100 1-1/2 2-5/8 1236 .1065 1-7/16 2-1/2 1237 .1040 1-7/16 2-1/2 1238 .1015 1-7/16 2-1/2 1239 .0995 1-3/8 2-3/8 1240 .0980 1-3/8 2-3/8 1241 .0960 1-3/8 2-3/8 1242 .0935 1-1/4 2-1/4 1243 .0890 1-1/4 2-1/4 1244 .0860 1-1/8 2-1/8 1245 .0820 1-1/8 2-1/8 1246 .0810 1-1/8 2-1/8 1247 .0785 1 2 1248 .0760 1 2 1249 .0730 1 2 1250 .0700 1 2 1251 .0670 1 2 1252 .0635 7/8 1-7/8 1253 .0595 7/8 1-7/8 1254 .0550 7/8 1-7/8 1255 .0520 7/8 1-7/8 1256 .0465 3/4 1-3/4 1257 .0430 3/4 1-3/4 1258 .0420 11/16 1-5/8 1259 .0410 11/16 1-5/8 1260 .0400 11/16 1-5/8 12
Series H204 • Wire Gauge Sizes (USA)
15
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
JOBBER LENGTH DRILLSCobalt Heavy Duty, 135o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1/64 .0156 3/16 3/4 121/32 .0312 1/2 1-3/8 123/64 .0469 3/4 1-3/4 121/16 .0625 7/8 1-7/8 125/64 .0781 1 2 123/32 .0938 1-1/4 2-1/4 127/64 .1094 1-1/2 2-5/8 121/8 .1250 1-5/8 2-3/4 129/64 .1406 1-3/4 2-7/8 125/32 .1562 2 3-1/8 1211/64 .1719 2-1/8 3-1/4 123/16 .1875 2-5/16 3-1/2 12
13/64 .2031 2-7/16 3-5/8 127/32 .2188 2-1/2 3-3/4 1215/64 .2344 2-5/8 3-7/8 121/4 .2500 2-3/4 4 12
17/64 .2656 2-7/8 4-1/8 129/32 .2812 2-15/16 4-1/4 619/64 .2969 3-1/16 4-3/8 65/16 .3125 3-3/16 4-1/2 621/64 .3281 3-5/16 4-5/8 611/32 .3438 3-7/16 4-3/4 6
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
23/64 .3594 3-1/2 4-7/8 63/8 .3750 3-5/8 5 6
25/64 .3906 3-3/4 5-1/8 613/32 .4062 3-7/8 5-1/4 627/64 .4219 3-15/16 5-3/8 67/16 .4375 4-1/16 5-1/2 629/64 .4531 4-3/16 5-5/8 615/32 .4688 4-5/16 5-3/4 631/64 .4844 4-3/8 5-7/8 6
1/2 .5000 4-1/2 6 633/64 .5156 4-13/16 6-5/8 117/32 .5312 4-13/16 6-5/8 135/64 .5469 4-13/16 6-5/8 19/16 .5625 4-13/16 6-5/8 137/64 .5781 4-13/16 6-5/8 119/32 .5938 5-3/16 7-1/8 139/64 .6094 5-3/16 7-1/8 1
5/8 .6250 5-3/16 7-1/8 141/64 .6406 5-3/16 7-1/8 121/32 .6562 5-3/16 7-1/8 143/64 .6719 5-5/8 7-5/8 111/16 .6875 5-5/8 7-5/8 1
Series C300 • Fractional Sizes (USA)Series S300 • Fractional Sizes (Import)
SEE
CUTTING FLUIDS
PAGE 128
16Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 2-5/8 3-7/8 12B .2380 2-3/4 4 12C .2420 2-3/4 4 12D .2460 2-3/4 4 12E .2500 2-3/4 4 12F .2570 2-7/8 4-1/8 12G .2610 2-7/8 4-1/8 12H .2660 2-7/8 4-1/8 12I .2720 2-7/8 4-1/8 6J .2770 2-7/8 4-1/8 6K .2810 2-15/16 4-1/4 6L .2900 2-15/16 4-1/4 6M .2950 3-1/16 4-3/8 6N .3020 3-1/16 4-3/8 6O .3160 3-3/16 4-1/2 6P .3230 3-5/16 4-5/8 6Q .3320 3-7/16 4-3/4 6R .3390 3-7/16 4-3/4 6S .3480 3-1/2 4-7/8 6T .3580 3-1/2 4-7/8 6U .3680 3-5/8 5 6V .3770 3-5/8 5 6W .3860 3-3/4 5-1/8 6X .3970 3-3/4 5-1/8 6Y .4040 3-7/8 5-1/4 6Z .4130 3-7/8 5-1/4 6
JOBBER LENGTH DRILLSCobalt Heavy Duty, 135o Split Point
Series C302 • Letter Sizes (USA)Series S302 • Letter Sizes (Import)
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
17
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
JOBBER LENGTH DRILLSCobalt Heavy Duty, 135o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 2-5/8 3-7/8 122 .2210 2-5/8 3-7/8 123 .2130 2-1/2 3-3/4 124 .2090 2-1/2 3-3/4 125 .2055 2-1/2 3-3/4 126 .2040 2-1/2 3-3/4 127 .2010 2-7/16 3-5/8 128 .1990 2-7/16 3-5/8 129 .1960 2-7/16 3-5/8 12
10 .1935 2-7/16 3-5/8 1211 .1910 2-5/16 3-1/2 1212 .1890 2-5/16 3-1/2 1213 .1850 2-5/16 3-1/2 1214 .1820 2-3/16 3-3/8 1215 .1800 2-3/16 3-3/8 1216 .1770 2-3/16 3-3/8 1217 .1730 2-3/16 3-3/8 1218 .1695 2-1/8 3-1/4 1219 .1660 2-1/8 3-1/4 1220 .1610 2-1/8 3-1/4 1221 .1590 2-1/8 3-1/4 1222 .1570 2 3-1/8 1223 .1540 2 3-1/8 1224 .1520 2 3-1/8 1225 .1495 1-7/8 3 1226 .1470 1-7/8 3 1227 .1440 1-7/8 3 1228 .1405 1-3/4 2-7/8 1229 .1360 1-3/4 2-7/8 1230 .1285 1-5/8 2-3/4 1231 .1200 1-5/8 2-3/4 1232 .1160 1-5/8 2-3/4 1233 .1130 1-1/2 2-5/8 1234 .1110 1-1/2 2-5/8 1235 .1100 1-1/2 2-5/8 1236 .1065 1-7/16 2-1/2 1237 .1040 1-7/16 2-1/2 1238 .1015 1-7/16 2-1/2 1239 .0995 1-3/8 2-3/8 1240 .0980 1-3/8 2-3/8 12
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
41 .0960 1-3/8 2-3/8 1242 .0935 1-1/4 2-1/4 1243 .0890 1-1/4 2-1/4 1244 .0860 1-1/8 2-1/8 1245 .0820 1-1/8 2-1/8 1246 .0810 1-1/8 2-1/8 1247 .0785 1 2 1248 .0760 1 2 1249 .0730 1 2 1250 .0700 1 2 1251 .0670 1 2 1252 .0635 7/8 1-7/8 1253 .0595 7/8 1-7/8 1254 .0550 7/8 1-7/8 1255 .0520 7/8 1-7/8 1256 .0465 3/4 1-3/4 1257 .0430 3/4 1-3/4 1258 .0420 11/16 1-5/8 1259 .0410 11/16 1-5/8 1260 .0400 11/16 1-5/8 1261 .0390 11/16 1-5/8 1262 .0380 5/8 1-1/2 1263 .0370 5/8 1-1/2 1264 .0360 5/8 1-1/2 1265 .0350 5/8 1-1/2 1266 .0330 1/2 1-3/8 1267 .0320 1/2 1-3/8 1268 .0310 1/2 1-3/8 1269 .0292 1/2 1-3/8 1270 .0280 3/8 1-1/4 1271 .0260 3/8 1-1/4 1272 .0250 5/16 1-1/8 1273 .0240 5/16 1-1/8 1274 .0225 1/4 1 1275 .0210 1/4 1 1276 .0200 3/16 7/8 1277 .0180 3/16 7/8 1278 .0160 3/16 7/8 1279 .0145 1/8 3/4 1280 .0135 1/8 3/4 12
Series C304 • Wire Gauge Sizes (USA)Series S304 • Wire Gauge Sizes (Import)
18Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL Pkg Qty
3/64 .0469 3/4 1-3/4 121/16 .0625 7/8 1-7/8 125/64 .0781 1 2 123/32 .0938 1-1/4 2-1/4 127/64 .1094 1-1/2 2-5/8 121/8 .1250 1-5/8 2-3/4 12
9/64 .1406 1-3/4 2-7/8 125/32 .1562 2 3-1/8 1211/64 .1719 2-1/8 3-1/4 123/16 .1875 2-5/16 3-1/2 12
13/64 .2031 2-7/16 3-5/8 127/32 .2188 2-1/2 3-3/4 12
15/64 .2344 2-5/8 3-7/8 121/4 .2500 2-3/4 4 12
17/64 .2656 2-7/8 4-1/8 129/32 .2812 2-15/16 4-1/4 6
19/64 .2969 3-1/16 4-3/8 65/16 .3125 3-3/16 4-1/2 621/64 .3281 3-5/16 4-5/8 611/32 .3438 3-7/16 4-3/4 623/64 .3594 3-1/2 4-7/8 6
3/8 .3750 3-5/8 5 625/64 .3906 3-3/4 5-1/8 613/32 .4062 3-7/8 5-1/4 627/64 .4219 3-15/16 5-3/8 67/16 .4375 4-1/16 5-1/2 629/64 .4531 4-3/16 5-5/8 615/32 .4688 4-5/16 5-3/4 631/64 .4844 4-3/8 5-7/8 6
1/2 .5000 4-1/2 6 6
Size Decimal Equiv.
Flute Length OAL Pkg Qty
A .2340 2-5/8 3-7/8 12B .2380 2-3/4 4 12C .2420 2-3/4 4 12D .2460 2-3/4 4 12E .2500 2-3/4 4 12F .2570 2-7/8 4-1/8 12G .2610 2-7/8 4-1/8 12H .2660 2-7/8 4-1/8 12I .2720 2-7/8 4-1/8 6J .2770 2-7/8 4-1/8 6K .2810 2-15/16 4-1/4 6L .2900 2-15/16 4-1/4 6M .2950 3-1/16 4-3/8 6N .3020 3-1/16 4-3/8 6O .3160 3-3/16 4-1/2 6P .3230 3-5/16 4-5/8 6Q .3320 3-7/16 4-3/4 6R .3390 3-7/16 4-3/4 6S .3480 3-1/2 4-7/8 6T .3580 3-1/2 4-7/8 6U .3680 3-5/8 5 6V .3770 3-5/8 5 6W .3860 3-3/4 5-1/8 6X .3970 3-3/4 5-1/8 6Y .4040 3-7/8 5-1/4 6Z .4130 3-7/8 5-1/4 6
• High Speed Steel, 135o Split Point
Series D250-D • Letter Sizes (USA)Series D250-I • Letter Sizes (Import)
WE ALSOOFFER SPECIAL
SIZES ANDCUTTING TOOL
ALTERATIONSERVICES.
JOBBER LENGTH DRILLSDYNO, Black & Gold,Heavy Duty
Series D250-D • Fractional Sizes (USA)Series D250-I • Fractional Sizes (Import)
19
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Decimal Equiv.
Flute Length OAL Pkg Qty
1 .2280 2-5/8 3-7/8 122 .2210 2-5/8 3-7/8 123 .2130 2-1/2 3-3/4 124 .2090 2-1/2 3-3/4 125 .2055 2-1/2 3-3/4 126 .2040 2-1/2 3-3/4 127 .2010 2-7/16 3-5/8 128 .1990 2-7/16 3-5/8 129 .1960 2-7/16 3-5/8 12
10 .1935 2-7/16 3-5/8 1211 .1910 2-5/16 3-1/2 1212 .1890 2-5/16 3-1/2 1213 .1850 2-5/16 3-1/2 1214 .1820 2-3/16 3-3/8 1215 .1800 2-3/16 3-3/8 1216 .1770 2-3/16 3-3/8 1217 .1730 2-3/16 3-3/8 1218 .1695 2-1/8 3-1/4 1219 .1660 2-1/8 3-1/4 1220 .1610 2-1/8 3-1/4 1221 .1590 2-1/8 3-1/4 1222 .1570 2 3-1/8 1223 .1540 2 3-1/8 1224 .1520 2 3-1/8 1225 .1495 1-7/8 3 1226 .1470 1-7/8 3 1227 .1440 1-7/8 3 1228 .1405 1-3/4 2-7/8 1229 .1360 1-3/4 2-7/8 1230 .1285 1-5/8 2-3/4 12
• High Speed Steel, 135o Degree Split Point
Size Decimal Equiv.
Flute Length OAL Pkg Qty
31 .1200 1-5/8 2-3/4 1232 .1160 1-5/8 2-3/4 1233 .1130 1-1/2 2-5/8 1234 .1110 1-1/2 2-5/8 1235 .1100 1-1/2 2-5/8 1236 .1065 1-7/16 2-1/2 1237 .1040 1-7/16 2-1/2 1238 .1015 1-7/16 2-1/2 1239 .0995 1-3/8 2-3/8 1240 .0980 1-3/8 2-3/8 1241 .0960 1-3/8 2-3/8 1242 .0935 1-1/4 2-1/4 1243 .0890 1-1/4 2-1/4 1244 .0860 1-1/8 2-1/8 1245 .0820 1-1/8 2-1/8 1246 .0810 1-1/8 2-1/8 1247 .0785 1 2 1248 .0760 1 2 1249 .0730 1 2 1250 .0700 1 2 1251 .0670 1 2 1252 .0635 7/8 1-7/8 1253 .0595 7/8 1-7/8 1254 .0550 7/8 1-7/8 1255 .0520 7/8 1-7/8 1256 .0465 3/4 1-3/4 1257 .0430 3/4 1-3/4 1258 .0420 11/16 1-5/8 1259 .0410 11/16 1-5/8 1260 .0400 11/16 1-5/8 12
Series D250-D • Wire Gauge Sizes (USA)Series D250-I • Wire Gauge Sizes (Import)
JOBBER LENGTH DRILLSDYNO, Black & Gold, Heavy Duty
20Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Flute Length OAL
1/16 7/8 1-7/85/64 1 23/32 1-1/4 2-1/47/64 1-1/2 2-5/81/8 1-5/8 2-3/4
9/64 1-3/4 2-7/85/32 2 3-1/811/64 2-1/8 3-1/43/16 2-5/16 3-1/2
13/64 2-7/16 3-5/87/32 2-1/2 3-3/415/64 2-5/8 3-7/81/4 2-3/4 4
17/64 2-7/8 4-1/89/32 2-15/16 4-1/4
19/64 3-1/16 4-3/85/16 3-3/16 4-1/2
21/64 3-5/16 4-5/811/32 3-7/16 4-3/423/64 3-1/2 4-7/83/8 3-5/8 5
25/64 3-3/4 5-1/813/32 3-7/8 5-1/427/64 3-15/16 5-3/87/16 4-1/16 5-1/2
29/64 4-3/16 5-5/815/32 4-5/16 5-3/431/64 4-3/8 5-7/81/2 4-1/2 6
JOBBER LENGTH DRILLSHeavy Duty, Tin Coated
Size Flute Length OAL
1 2-5/8 3-7/82 2-5/8 3-7/83 2-1/2 3-3/44 2-1/2 3-3/45 2-1/2 3-3/46 2-1/2 3-3/47 2-7/16 3-5/88 2-7/16 3-5/89 2-7/16 3-5/8
10 2-7/16 3-5/811 2-5/16 3-1/212 2-5/16 3-1/213 2-5/16 3-1/214 2-3/16 3-3/815 2-3/16 3-3/816 2-3/16 3-3/817 2-3/16 3-3/818 2-1/8 3-1/419 2-1/8 3-1/420 2-1/8 3-1/421 2-1/8 3-1/422 2 3-1/823 2 3-1/824 2 3-1/825 1-7/8 326 1-7/8 327 1-7/8 328 1-3/4 2-7/829 1-3/4 2-7/830 1-5/8 2-3/431 1-5/8 2-3/432 1-5/8 2-3/433 1-1/2 2-5/834 1-1/2 2-5/835 1-1/2 2-5/836 1-7/16 2-1/237 1-7/16 2-1/238 1-7/16 2-1/239 1-3/8 2-3/840 1-3/8 2-3/8
Series T500 • Fractional Sizes Series T500 • Wire Gauge Sizes
PACKAGEQUANTITY
ONLY
21
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
JOBBER LENGTH DRILLSFast Spiral
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1/64 .0156 3/16 3/4 121/32 .0312 1/2 1-3/8 123/64 .0469 3/4 1-3/4 121/16 .0625 7/8 1-7/8 125/64 .0781 1 2 123/32 .0938 1-1/4 2-1/4 127/64 .1094 1-1/2 2-5/8 121/8 .1250 1-5/8 2-3/4 12
9/64 .1406 1-3/4 2-7/8 125/32 .1562 2 3-1/8 1211/64 .1719 2-1/8 3-1/4 123/16 .1875 2-5/16 3-1/2 12
13/64 .2031 2-7/16 3-5/8 127/32 .2188 2-1/2 3-3/4 12
15/64 .2344 2-5/8 3-7/8 121/4 .2500 2-3/4 4 12
17/64 .2656 2-7/8 4-1/8 129/32 .2812 2-15/16 4-1/4 6
19/64 .2969 3-1/16 4-3/8 65/16 .3125 3-3/16 4-1/2 6
21/64 .3281 3-5/16 4-5/8 611/32 .3438 3-7/16 4-3/4 623/64 .3594 3-1/2 4-7/8 63/8 .3750 3-5/8 5 6
25/64 .3906 3-3/4 5-1/8 613/32 .4062 3-7/8 5-1/4 627/64 .4219 3-15/16 5-3/8 67/16 .4375 4-1/16 5-1/2 6
29/64 .4531 4-3/16 5-5/8 615/32 .4688 4-5/16 5-3/4 631/64 .4844 4-3/8 5-7/8 61/2 .5000 4-1/2 6 6
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 2-5/8 3-7/8 12B .2380 2-3/4 4 12C .2420 2-3/4 4 12D .2460 2-3/4 4 12E .2500 2-3/4 4 12F .2570 2-7/8 4-1/8 12G .2610 2-7/8 4-1/8 12H .2660 2-7/8 4-1/8 12I .2720 2-7/8 4-1/8 6J .2770 2-7/8 4-1/8 6K .2810 2-15/16 4-1/4 6L .2900 2-15/16 4-1/4 6M .2950 3-1/16 4-3/8 6N .3020 3-1/16 4-3/8 6O .3160 3-3/16 4-1/2 6P .3230 3-5/16 4-5/8 6Q .3320 3-7/16 4-3/4 6R .3390 3-7/16 4-3/4 6S .3480 3-1/2 4-7/8 6T .3580 3-1/2 4-7/8 6U .3680 3-5/8 5 6V .3770 3-5/8 5 6W .3860 3-3/4 5-1/8 6X .3970 3-3/4 5-1/8 6Y .4040 3-7/8 5-1/4 6Z .4130 3-7/8 5-1/4 6
• Bright Finish, 118º Point
Series FS100 • Fractional Sizes Series FS102 • Letter Sizes
SEE
CUTTING FLUIDS
PAGE 128
22Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
• Bright Finish, 118º Point
JOBBER LENGTH DRILLSFast Spiral
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 2-5/8 3-7/8 122 .2210 2-5/8 3-7/8 123 .2130 2-1/2 3-3/4 124 .2090 2-1/2 3-3/4 125 .2055 2-1/2 3-3/4 126 .2040 2-1/2 3-3/4 127 .2010 2-7/16 3-5/8 128 .1990 2-7/16 3-5/8 129 .1960 2-7/16 3-5/8 12
10 .1935 2-7/16 3-5/8 1211 .1910 2-5/16 3-1/2 1212 .1890 2-5/16 3-1/2 1213 .1850 2-5/16 3-1/2 1214 .1820 2-3/16 3-3/8 1215 .1800 2-3/16 3-3/8 1216 .1770 2-3/16 3-3/8 1217 .1730 2-3/16 3-3/8 1218 .1695 2-1/8 3-1/4 1219 .1660 2-1/8 3-1/4 1220 .1610 2-1/8 3-1/4 1221 .1590 2-1/8 3-1/4 1222 .1570 2 3-1/8 1223 .1540 2 3-1/8 1224 .1520 2 3-1/8 1225 .1495 1-7/8 3 1226 .1470 1-7/8 3 1227 .1440 1-7/8 3 1228 .1405 1-3/4 2-7/8 1229 .1360 1-3/4 2-7/8 1230 .1285 1-5/8 2-3/4 1231 .1200 1-5/8 2-3/4 1232 .1160 1-5/8 2-3/4 1233 .1130 1-1/2 2-5/8 1234 .1110 1-1/2 2-5/8 1235 .1100 1-1/2 2-5/8 1236 .1065 1-7/16 2-1/2 1237 .1040 1-7/16 2-1/2 1238 .1015 1-7/16 2-1/2 1239 .0995 1-3/8 2-3/8 1240 .0980 1-3/8 2-3/8 12
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
41 .0960 1-3/8 2-3/8 1242 .0935 1-1/4 2-1/4 1243 .0890 1-1/4 2-1/4 1244 .0860 1-1/8 2-1/8 1245 .0820 1-1/8 2-1/8 1246 .0810 1-1/8 2-1/8 1247 .0785 1 2 1248 .0760 1 2 1249 .0730 1 2 1250 .0700 1 2 1251 .0670 1 2 1252 .0635 7/8 1-7/8 1253 .0595 7/8 1-7/8 1254 .0550 7/8 1-7/8 1255 .0520 7/8 1-7/8 1256 .0465 3/4 1-3/4 1257 .0430 3/4 1-3/4 1258 .0420 11/16 1-5/8 1259 .0410 11/16 1-5/8 1260 .0400 11/16 1-5/8 1261 .0390 11/16 1-5/8 1262 .0380 5/8 1-1/2 1263 .0370 5/8 1-1/2 1264 .0360 5/8 1-1/2 1265 .0350 5/8 1-1/2 1266 .0330 1/2 1-3/8 1267 .0320 1/2 1-3/8 1268 .0310 1/2 1-3/8 1269 .0292 1/2 1-3/8 1270 .0280 3/8 1-1/4 1271 .0260 3/8 1-1/4 1272 .0250 5/16 1-1/8 1273 .0240 5/16 1-1/8 1274 .0225 1/4 1 1275 .0210 1/4 1 1276 .0200 3/16 7/8 1277 .0180 3/16 7/8 1278 .0160 3/16 7/8 1279 .0145 1/8 3/4 1280 .0135 1/8 3/4 12
Series FS104 • Wire Gauge Sizes
23
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Decimal Equiv.
Flute Length OAL Pkg Qty
1/64 .0156 3/16 3/4 121/32 .0312 1/2 1-3/8 123/64 .0469 3/4 1-3/4 121/16 .0625 7/8 1-7/8 125/64 .0781 1 2 123/32 .0938 1-1/4 2-1/4 127/64 .1094 1-1/2 2-5/8 121/8 .1250 1-5/8 2-3/4 129/64 .1406 1-3/4 2-7/8 125/32 .1562 2 3-1/8 1211/64 .1719 2-1/8 3-1/4 123/16 .1875 2-5/16 3-1/2 12
13/64 .2031 2-7/16 3-5/8 127/32 .2188 2-1/2 3-3/4 1215/64 .2344 2-5/8 3-7/8 121/4 .2500 2-3/4 4 12
17/64 .2656 2-7/8 4-1/8 129/32 .2812 2-15/16 4-1/4 619/64 .2969 3-1/16 4-3/8 65/16 .3125 3-3/16 4-1/2 621/64 .3281 3-5/16 4-5/8 611/32 .3438 3-7/16 4-3/4 623/64 .3594 3-1/2 4-7/8 6
3/8 .3750 3-5/8 5 625/64 .3906 3-3/4 5-1/8 613/32 .4062 3-7/8 5-1/4 627/64 .4219 3-15/16 5-3/8 67/16 .4375 4-1/16 5-1/2 629/64 .4531 4-3/16 5-5/8 615/32 .4688 4-5/16 5-3/4 631/64 .4844 4-3/8 5-7/8 6
1/2 .5000 4-1/2 6 6
JOBBER LENGTH DRILLSLeft Hand Drills
Size Decimal Equiv.
Flute Length OAL Pkg Qty
A .2340 2-5/8 3-7/8 12B .2380 2-3/4 4 12C .2420 2-3/4 4 12D .2460 2-3/4 4 12E .2500 2-3/4 4 12F .2570 2-7/8 4-1/8 12G .2610 2-7/8 4-1/8 12H .2660 2-7/8 4-1/8 12I .2720 2-7/8 4-1/8 6J .2770 2-7/8 4-1/8 6K .2810 2-15/16 4-1/4 6L .2900 2-15/16 4-1/4 6M .2950 3-1/16 4-3/8 6N .3020 3-1/16 4-3/8 6O .3160 3-3/16 4-1/2 6P .3230 3-5/16 4-5/8 6Q .3320 3-7/16 4-3/4 6R .3390 3-7/16 4-3/4 6S .3480 3-1/2 4-7/8 6T .3580 3-1/2 4-7/8 6U .3680 3-5/8 5 6V .3770 3-5/8 5 6W .3860 3-3/4 5-1/8 6X .3970 3-3/4 5-1/8 6Y .4040 3-7/8 5-1/4 6Z .4130 3-7/8 5-1/4 6
• Black Oxide, 118º Point
Series LHJ100 • Fractional Sizes Series LHJ102 • Letter Sizes
24Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS JOBBER LENGTH DRILLSLeft Hand Drills
• Black Oxide 118º Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 2-5/8 3-7/8 122 .2210 2-5/8 3-7/8 123 .2130 2-1/2 3-3/4 124 .2090 2-1/2 3-3/4 125 .2055 2-1/2 3-3/4 126 .2040 2-1/2 3-3/4 127 .2010 2-7/16 3-5/8 128 .1990 2-7/16 3-5/8 129 .1960 2-7/16 3-5/8 12
10 .1935 2-7/16 3-5/8 1211 .1910 2-5/16 3-1/2 1212 .1890 2-5/16 3-1/2 1213 .1850 2-5/16 3-1/2 1214 .1820 2-3/16 3-3/8 1215 .1800 2-3/16 3-3/8 1216 .1770 2-3/16 3-3/8 1217 .1730 2-3/16 3-3/8 1218 .1695 2-1/8 3-1/4 1219 .1660 2-1/8 3-1/4 1220 .1610 2-1/8 3-1/4 1221 .1590 2-1/8 3-1/4 1222 .1570 2 3-1/8 1223 .1540 2 3-1/8 1224 .1520 2 3-1/8 1225 .1495 1-7/8 3 1226 .1470 1-7/8 3 1227 .1440 1-7/8 3 1228 .1405 1-3/4 2-7/8 1229 .1360 1-3/4 2-7/8 1230 .1285 1-5/8 2-3/4 1231 .1200 1-5/8 2-3/4 1232 .1160 1-5/8 2-3/4 1233 .1130 1-1/2 2-5/8 1234 .1110 1-1/2 2-5/8 1235 .1100 1-1/2 2-5/8 1236 .1065 1-7/16 2-1/2 1237 .1040 1-7/16 2-1/2 1238 .1015 1-7/16 2-1/2 1239 .0995 1-3/8 2-3/8 1240 .0980 1-3/8 2-3/8 12
Series LHJ104 • Wire Gauge Sizes
25
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SizeDecimal Equiv.
(Inches)
FluteLength OAL
1.40 .0551 7/8 1-7/81.45 .0571 7/8 1-7/81.50 .0591 7/8 1-7/81.55 .0610 7/8 1-7/81.60 .0630 7/8 1-7/81.65 .0650 1 21.70 .0669 1 21.75 .0689 1 21.80 .0709 1 21.85 .0728 1 21.90 .0748 1 21.95 .0768 1 22.00 .0787 1 2-1/82.05 .0807 1-1/8 2-1/82.10 .0827 1-1/8 2-1/82.15 .0846 1-1/8 2-1/82.20 .0866 1-1/4 2-1/42.25 .0886 1-1/4 2-1/42.30 .0906 1-1/4 2-1/42.35 .0925 1-1/4 2-1/42.40 .0945 1-3/8 2-3/82.45 .0965 1-3/8 2-3/82.50 .0984 1-3/8 2-3/82.60 .1024 1-7/16 2-1/22.70 .1063 1-7/16 2-1/22.75 .1083 1-1/2 2-5/82.80 .1102 1-1/2 2-5/82.90 .1142 1-5/8 2-3/43.00 .1181 1-5/8 2-3/43.10 .1220 1-5/8 2-3/43.20 .1260 1-5/8 2-3/43.25 .1280 1-5/8 2-3/43.30 .1299 1-3/4 2-7/83.40 .1339 1-3/4 2-7/83.50 .1378 1-3/4 2-7/83.60 .1417 1-7/8 33.70 .1457 1-7/8 33.75 .1476 1-7/8 33.80 .1496 1-7/8 33.90 .1535 2 3-1/84.00 .1575 2-1/8 3-1/44.10 .1614 2-1/8 3-1/44.20 .1654 2-1/8 3-1/44.25 .1673 2-1/8 3-1/44.30 .1693 2-1/8 3-1/4
JOBBER LENGTH DRILLSMetric
SizeDecimal Equiv.
(Inches)
FluteLength OAL
.15 .0059 3/64 3/4
.16 .0063 3/64 3/4
.17 .0067 1/16 3/4
.18 .0071 1/16 3/4
.19 .0075 1/16 3/4
.20 .0079 1/16 3/4
.21 .0083 3/32 3/4
.22 .0087 1/16 3/4
.23 .0091 3/32 3/4
.24 .0094 3/32 3/4
.25 .0098 5/64 3/4
.26 .0102 5/64 3/4
.27 .0106 5/64 3/4
.28 .0110 5/64 3/4
.29 .0114 5/64 3/4
.30 .0118 3/32 3/4
.32 .0126 3/32 3/4
.34 .0134 5/32 3/4
.35 .0138 1/8 3/4
.36 .0142 5/32 3/4
.38 .0150 3/16 3/4
.40 .0158 3/16 7/8
.42 .0165 3/16 7/8
.44 .0173 3/16 7/8
.45 .0177 3/16 7/8
.46 .0181 3/16 7/8
.48 .0189 3/16 7/8
.50 .0197 3/16 7/8
.55 .0217 1/4 1
.60 .0236 5/16 1-1/8
.65 .0256 3/8 1-1/4
.70 .0276 3/8 1-1/4
.75 .0295 1/2 1-3/8
.80 .0315 1/2 1-3/8
.85 .0335 5/8 1-1/2
.90 .0355 5/8 1-1/2
.95 .0374 5/8 1-1/21.00 .0394 11/16 1-5/81.05 .0413 11/16 1-5/81.10 .0433 3/4 1-3/41.15 .0453 3/4 1-3/41.20 .0472 7/8 1-7/81.25 .0492 7/8 1-7/81.30 .0512 7/8 1-7/81.35 .0531 7/8 1-7/8
Series M100 • HSSSeries MC100 • Cobalt
26Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS JOBBER LENGTH DRILLSMetric
SizeDecimal Equiv.
(Inches)
Flute Length OAL
4.40 .1732 2-3/16 3-3/84.50 .1772 2-3/16 3-3/84.60 .1811 2-3/16 3-3/84.70 .1850 2-5/16 3-1/24.75 .1870 2-5/16 3-1/24.80 .1890 2-5/16 3-1/24.90 .1929 2-7/16 3-5/85.00 .1969 2-7/16 3-5/85.10 .2008 2-7/16 3-5/85.20 .2047 2-1/2 3-3/45.25 .2067 2-1/2 3-3/45.30 .2087 2-1/2 3-3/45.40 .2126 2-1/2 3-3/45.50 .2165 2-1/2 3-3/45.60 .2205 2-5/8 3-7/85.70 .2244 2-5/8 3-7/85.75 .2264 2-5/8 3-7/85.80 .2283 2-5/8 3-7/85.90 .2323 2-5/8 3-7/86.00 .2362 2-3/4 46.10 .2402 2-3/4 46.20 .2441 2-3/4 46.25 .2461 2-3/4 46.30 .2480 2-3/4 46.40 .2520 2-7/8 4-1/86.50 .2559 2-7/8 4-1/86.60 .2598 2-7/8 4-1/86.70 .2638 2-7/8 4-1/86.75 .2657 2-7/8 4-1/86.80 .2677 2-7/8 4-1/86.90 .2717 2-7/8 4-1/87.00 .2756 2-7/8 4-1/87.10 .2795 2-15/16 4-1/47.20 .2835 2-15/16 4-1/47.25 .2854 2-15/16 4-1/47.30 .2874 2-15/16 4-1/47.40 .2913 3-1/16 4-3/87.50 .2953 3-1/16 4-3/87.60 .2992 3-1/16 4-3/87.70 .3031 3-3/16 4-1/27.75 .3051 3-3/16 4-1/27.80 .3071 3-3/16 4-1/27.85 .3091 3-3/16 4-1/27.90 .3110 3-3/16 4-1/28.00 .3150 3-3/16 4-1/2
SizeDecimal Equiv.
(Inches)
Flute Length OAL
8.10 .3189 3-5/16 4-5/88.20 .3228 3-5/16 4-5/88.25 .3248 3-5/16 4-5/88.30 .3268 3-5/16 4-5/88.40 .3307 3-7/16 4-3/48.50 .3346 3-7/16 4-3/48.60 .3386 3-7/16 4-3/48.70 .3425 3-7/16 4-3/48.75 .3445 3-1/2 4-7/88.80 .3465 3-1/2 4-7/88.90 .3504 3-1/2 4-7/89.00 .3543 3-1/2 4-7/89.10 .3583 3-1/2 4-7/89.20 .3622 3-5/8 59.25 .3642 3-5/8 59.30 .3661 3-5/8 59.40 .3701 3-5/8 59.50 .3740 3-5/8 59.60 .3780 3-3/4 5-1/89.70 .3819 3-3/4 5-1/89.75 .3839 3-3/4 5-1/89.80 .3858 3-3/4 5-1/89.90 .3898 3-3/4 5-1/8
10.00 .3937 3-3/4 5-1/810.10 .3976 3-3/4 5-1/410.20 .4016 3-7/8 5-1/410.30 .4055 3-7/8 5-1/410.40 .4094 3-7/8 5-1/410.50 .4134 3-15/16 5-3/810.70 .4213 3-15/16 5-3/810.80 .4252 4-1/16 5-1/210.90 .4291 4-1/16 5-1/211.00 .4331 4-1/16 5-1/211.10 .4370 4-1/16 5-1/211.20 .4409 4-3/16 5-5/811.25 .4429 4-3/16 5-5/811.30 .4449 4-3/16 5-5/811.40 .4488 4-3/16 5-5/811.50 .4528 4-3/16 5-5/811.60 .4567 4-3/16 5-5/811.70 .4606 4-3/16 5-5/811.80 .4646 4-3/16 5-5/811.90 .4685 4-3/16 5-5/812.00 .4724 4-3/8 5-7/812.10 .4764 4-3/8 5-7/8
Series M100 • HSSSeries MC100 • Cobalt
27
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
JOBBER LENGTH DRILLSMetric
SizeDecimal Equiv.
(Inches)
FluteLength OAL
12.20 .4803 4-3/8 5-7/812.25 .4823 4-3/8 5-7/811.10 .4370 4-1/16 5-1/211.20 .4409 4-3/16 5-5/811.25 .4429 4-3/16 5-5/811.30 .4449 4-3/16 5-5/811.40 .4488 4-3/16 5-5/811.50 .4528 4-3/16 5-5/811.60 .4567 4-3/16 5-5/811.70 .4606 4-3/16 5-5/811.80 .4646 4-3/16 5-5/811.90 .4685 4-3/16 5-5/812.00 .4724 4-3/8 5-7/812.10 .4764 4-3/8 5-7/812.20 .4803 4-3/8 5-7/812.25 .4823 4-3/8 5-7/812.30 .4843 4-3/8 5-7/812.40 .4882 4-3/8 5-7/812.50 .4921 4-1/2 612.60 .4961 4-1/2 612.70 .5000 4-1/2 612.75 .5020 4-1/2 612.80 .5039 4-1/2 612.90 .5079 4-1/2 613.00 .5118 4-1/2 613.50 .5315 4-13/16 6-5/813.80 .5433 4-13/16 6-5/814.00 .5512 4-13/16 6-5/814.50 .5709 4-13/16 6-5/815.00 .5906 5-3/16 7-1/815.25 .6004 5-3/16 7-1/815.50 .6102 5-3/16 7-1/816.00 .6299 5-3/16 7-1/816.50 .6496 5-3/16 7-1/817.00 .6693 5-5/8 7-5/817.50 .6890 5-5/8 7-5/818.00 .7087 5-5/8 7-5/819.00 .7480 5-5/8 7-5/819.50 .7677 5-5/8 7-5/820.00 .7874 5-5/8 7-5/8
Series M100 • HSSSeries MC100 • Cobalt
• Continued
CALL FORSPECIAL SIZES
NOT SHOWN
28Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS TAPER LENGTH DRILLSHigh Speed Steel
Size Decimal Equiv.
Flute Length OAL Pkg
Qty1/64 .0156 5/16 1-1/2 121/32 .0312 3/4 2 123/64 .0469 1-1/8 2-1/4 121/16 .0625 1-3/4 3 125/64 .0781 2 3-3/4 123/32 .0938 2-1/4 4-1/4 127/64 .1094 2-1/2 4-5/8 121/8 .1250 2-3/4 5-1/8 129/64 .1406 3 5-3/8 125/32 .1562 3 5-3/8 1211/64 .1719 3-3/8 5-3/4 123/16 .1875 3-3/8 5-3/4 1213/64 .2031 3-5/8 6 127/32 .2188 3-5/8 6 1215/64 .2344 3-3/4 6-1/8 121/4 .2500 3-3/4 6-1/8 12
17/64 .2656 3-7/8 6-1/4 129/32 .2812 3-7/8 6-1/4 619/64 .2969 4 6-3/8 65/16 .3125 4 6-3/8 621/64 .3281 4-1/8 6-1/2 611/32 .3438 4-1/8 6-1/2 623/64 .3594 4-1/4 6-3/4 63/8 .3750 4-1/4 6-3/4 6
25/64 .3906 4-3/8 7 613/32 .4062 4-3/8 7 627/64 .4219 4-5/8 7-1/4 67/16 .4375 4-5/8 7-1/4 629/64 .4531 4-3/4 7-1/2 615/32 .4688 4-3/4 7-1/2 631/64 .4844 4-3/4 7-3/4 61/2 .5000 4-3/4 7-3/4 6
33/64 .5156 4-3/4 8 117/32 .5312 4-3/4 8 135/64 .5469 4-7/8 8-1/4 19/16 .5625 4-7/8 8-1/4 137/64 .5781 4-7/8 8-3/4 119/32 .5938 4-7/8 8-3/4 139/64 .6094 4-7/8 8-3/4 15/8 .6250 4-7/8 8-3/4 1
41/64 .6406.6562
5-1/85-1/8
99
121/32 143/64 .6719 5-3/8 9-1/4 111/16 .6875 5-3/8 9-1/4 145/64 .7031 5-5/8 9-1/2 123/32 .7188 5-5/8 9-1/2 147/64 .7344 5-7/8 9-3/4 13/4 .7500 5-7/8 9-3/4 1
Size Decimal Equiv.
Flute Length OAL Pkg
Qty49/64 .7656 6 9-7/8 125/32 .7812 6 9-7/8 151/64 .7969 6-1/8 10 113/16 .8125 6-1/8 10 153/64 .8281 6-1/8 10 127/32 .8438 6-1/8 10 155/64 .8594 6-1/8 10 1
7/8 .8750 6-1/8 10 157/64 .8906 6-1/8 10 129/32 .9062 6-1/8 10 159/64 .9219 6-1/8 10-3/4 115/16 .9375 6-1/8 10-3/4 161/64 .9531 6-3/8 11 131/32 .9688 6-3/8 11 163/64 .9844 6-3/8 11 1
1 1.0000 6-3/8 11 11-1/64 1.0156 6-1/2 11-1/8 11-1/32 1.0312 6-1/2 11-1/8 11-3/64 1.0469 6-5/8 11-1/4 11-1/16 1.0625 6-5/8 11-1/4 11-5/64 1.0781 6-7/8 11-1/2 11-3/32 1.0938 6-7/8 11-1/2 11-7/64 1.1094 7-1/8 11-3/4 11-1/8 1.1250 7-1/8 11-3/4 11-9/64 1.1406 7-1/4 11-7/8 11-5/32 1.1562 7-1/4 11-7/8 11-11/64 1.1719 7-3/8 12 11-3/16 1.1875 7-3/8 12 11-13/64 1.2031 7-1/2 12-1/8 11-7/32 1.2188 7-1/2 12-1/8 11-15/64 1.2344 7-7/8 12-1/2 11-1/4 1.2500 7-7/8 12-1/2 11-9/32 1.2812 8-1/2 14-1/8 11-5/16 1.3125 8-5/8 14-1/4 11-11/32 1.3438 8-3/4 14-3/8 11-3/8 1.3750 8-7/8 14-1/2 1
1-13/32 1.4062 9 14-5/8 11-7/16 1.4375 9-1/8 14-3/4 11-15/32 1.4688 9-1/4 14-7/8 11-1/2 1.5000 9-3/8 15 11-9/16 1.5625 9-5/8 15-1/4 11-5/8 1.6250 9-7/8 15-5/8 1
1-11/16 1.6875 10-1/8 16 11-3/4 1.7500 10-1/2 16-1/4 1
1-13/16 1.8125 10-1/2 16-1/4 11-7/8 1.8700 10-5/8 16-1/4 1
1-15/16 1.9375 10-3/4 16-5/8 12 2.0000 10-3/4 17-1/4 1
• High Speed Steel, Bright Finish
1/2” Diameter, Surface Treated over 1/2”, 118° PointTaper length drills, longer than jobbers length, are de-signed to perform under a variety of normalconditions and in a broad range of materials.
* 1/2” Shank also available for drill sizes over 1/2
• Cobalt Heavy Duty, HSS
Surface Treated, 135° PointThis drill is made of cobalt high speed steel and designed for heavy duty deep hole drilling in tough alloy steels, forg-ings and castings.
Series TLD100 • Fractional Sizes
29
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
TAPER LENGTH DRILLSHigh Speed Steel
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 3-3/4 6-1/8 122 .2210 3-3/4 6-1/8 123 .2130 3-5/8 6 124 .2090 3-5/8 6 125 .2055 3-5/8 6 126 .2040 3-5/8 6 127 .2010 3-5/8 6 128 .1990 3-5/8 6 129 .1960 3-5/8 6 1210 .1935 3-5/8 6 1211 .1910 3-5/8 6 1212 .1890 3-5/8 6 1213 .1850 3-3/8 5-3/4 1214 .1820 3-3/8 5-3/4 1215 .1800 3-3/8 5-3/4 1216 .1770 3-3/8 5-3/4 1217 .1730 3-3/8 5-3/4 1218 .1695 3-3/8 5-3/4 1219 .1660 3-3/8 5-3/4 1220 .1610 3-3/8 5-3/4 1221 .1590 3-3/8 5-3/4 1222 .1570 3-3/8 5-3/4 1223 .1540 3 5-3/8 1224 .1520 3 5-3/8 1225 .1495 3 5-3/8 1226 .1470 3 5-3/8 1227 .1440 3 5-3/8 1228 .1405 3 5-3/8 1229 .1360 3 5-3/8 1230 .1285 3 5-3/8 1231 .1200 2-3/4 5-1/8 1232 .1160 2-3/4 5-1/8 1233 .1130 2-3/4 5-1/8 1234 .1110 2-3/4 5-1/8 1235 .1100 2-3/4 5-1/8 1236 .1065 2-1/2 4-5/8 1237 .1040 2-1/2 4-5/8 1238 .1015 2-1/2 4-5/8 1239 .0995 2-1/2 4-5/8 1240 .0980 2-1/2 4-5/8 12
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
41 .0960 2-1/2 4-5/8 1242 .0935 2-1/4 4-1/4 1243 .0890 2-1/4 4-1/4 1244 .0860 2-1/4 4-1/4 1245 .0820 2-1/4 4-1/4 1246 .0810 2-1/4 4-1/4 1247 .0785 2-1/4 4-1/4 1248 .0760 2 3-3/4 1249 .0730 2 3-3/4 1250 .0700 2 3-3/4 1251 .0670 2 3-3/4 1252 .0635 2 3-3/4 1253 .0595 1-3/4 3 1254 .0550 1-3/4 3 1255 .0520 1-3/4 3 1256 .0465 1-1/8 2-1/4 1257 .0430 1-1/8 2-1/4 1258 .0420 1-1/8 2-1/4 1259 .0410 1-1/8 2-1/4 1260 .0400 1-1/8 2-1/4 1261 .0390 1-1/8 2-1/4 1262 .0380 3/4 2 1263 .0370 3/4 2 1264 .0360 3/4 2 1265 .0350 3/4 2 1266 .0330 3/4 2 1267 .0320 3/4 2 1268 .0310 3/4 2 1269 .0292 3/4 2 1270 .0280 3/4 2 1271 .0260 3/4 2 1272 .0250 5/16 1-1/2 1273 .0240 5/16 1-1/2 1274 .0225 5/16 1-1/2 1275 .0210 5/16 1-1/2 1276 .0200 5/16 1-1/2 1277 .0180 5/16 1-1/2 1278 .0160 5/16 1-1/2 1279 .0145 5/16 1-1/2 1280 .0135 5/16 1-1/2 12
Series TLD104 • Wire Gauge Sizes
30Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS TAPER LENGTH DRILLSHigh Speed Steel & Cobalt
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 3-3/4 6-1/8 12B .2380 3-3/4 6-1/8 12C .2420 3-3/4 6-1/8 12D .2460 3-3/4 6-1/8 12E .2500 3-3/4 6-1/8 12F .2570 3-7/8 6-1/4 12G .2610 3-7/8 6-1/4 12H .2660 3-7/8 6-1/4 12I .2720 3-7/8 6-1/4 12J .2770 3-7/8 6-1/4 6K .2810 3-7/8 6-1/4 6L .2900 4 6-3/8 6M .2950 4 6-3/8 6N .3020 4 6-3/8 6O .3160 4-1/8 6-1/2 6P .3230 4-1/8 6-1/2 6Q .3320 4-1/8 6-1/2 6R .3390 4-1/8 6-1/2 6S .3480 4-1/4 6-3/4 6T .3580 4-1/4 6-3/4 6U .3680 4-1/4 6-3/4 6V .3770 4-3/8 7 6W .3860 4-3/8 7 6X .3970 4-3/8 7 6Y .4040 4-3/8 7 6Z .4130 4-5/8 7-1/4 6
Series TLD102 • Letter Sizes
SEE
CUTTING FLUIDS
PAGE 128
31
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SCREW MACHINE LENGTH DRILLSOxide Finish, / TIN Coated
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
3/64 .0469 1/2 1-3/8 121/16 .0625 5/8 1-5/8 125/64 .0781 11/16 1-11/16 123/32 .0938 3/4 1-3/4 127/64 .1094 13/16 1-13/16 121/8 .1250 7/8 1-7/8 12
9/64 .1406 15/16 1-15/16 125/32 .1562 1 2-1/16 1211/64 .1719 1-1/16 2-1/8 123/16 .1875 1-1/8 2-3/16 1213/64 .2031 1-3/16 2-1/4 127/32 .2188 1-1/4 2-3/8 1215/64 .2344 1-5/16 2-7/16 121/4 .2500 1-3/8 2-1/2 12
17/64 .2656 1-7/16 2-5/8 129/32 .2812 1-1/2 2-11/16 619/64 .2969 1-9/16 2-3/4 65/16 .3125 1-5/8 2-13/16 621/64 .3281 1-11/16 2-15/16 611/32 .3438 1-11/16 3 623/64 .3594 1-3/4 3-1/16 6
3/8 .3750 1-13/16 3-1/8 625/64 .3906 1-7/8 3-1/4 613/32 .4062 1-15/16 3-5/16 627/64 .4219 2 3-3/8 67/16 .4375 2-1/16 3-7/16 6
29/64 .4531 2-1/8 3-9/16 615/32 .4688 2-1/8 3-5/8 631/64 .4844 2-3/16 3-11/16 6
1/2 .5000 2-1/4 3-3/4 633/64 .5156 2-3/8 3-7/8 117/32 .5312 2-3/8 3-7/8 135/64 .5469 2-1/2 4 19/16 .5625 2-1/2 4 137/64 .5781 2-5/8 4-1/8 119/32 .5938 2-5/8 4-1/8 139/64 .6094 2-3/4 4-1/4 1
5/8 .6250 2-3/4 4-1/4 1
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
41/64 .6406 2-7/8 4-1/2 121/32 .6562 2-7/8 4-1/2 143/64 .6719 2-7/8 4-5/8 111/16 .6875 2-7/8 4-5/8 145/64 .7031 3 4-3/4 123/32 .7188 3 4-3/4 147/64 .7344 3-1/8 5 13/4 .7500 3-1/8 5 1
49/64 .7656 3-1/4 5-1/8 125/32 .7812 3-1/4 5-1/8 151/64 .7969 3-3/8 5-1/4 113/16 .8125 3-3/8 5-1/4 153/64 .8281 3-1/2 5-3/8 127/32 .8438 3-1/2 5-3/8 155/64 .8594 3-1/2 5-1/2 17/8 .8750 3-1/2 5-1/2 1
57/64 .8906 3-5/8 5-5/8 129/32 .9062 3-5/8 5-5/8 159/64 .9219 3-3/4 5-3/4 115/16 .9375 3-3/4 5-3/4 161/64 .9531 3-7/8 5-7/8 131/32 .9688 3-7/8 5-7/8 163/64 .9844 4 6 1
1 1.0000 4 6 11-1/64 1.0156 4 6-1/4 11-3/32 1.0312 4 6-1/4 11-3/64 1.0469 4 6-1/4 11-1/16 1.0625 4 6-1/4 11-5/64 1.0781 4 6-3/8 11-3/32 1.0938 4 6-3/8 11-7/64 1.1094 4 6-3/8 11-1/8 1.1250 4 6-3/8 1
1-9/64 1.1406 4 6-5/8 11-5/32 1.1562 4-1/4 6-5/8 11-11/64 1.1719 4-1/4 6-5/8 11-3/16 1.1875 4-1/4 6-5/8 1
1-13/64 1.2031 4-3/8 6-3/4 11-7/32 1.2188 4-3/8 6-3/4 1
Series S400 • HSS, Oxide Finish, 135° Split PointSeries S400-TI • TIN Coated, 135° Split Point
• Fractional Sizes
32Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1-15/64 1.2344 4-3/8 6-3/4 11-1/4 1.2500 4-3/8 6-3/4 1
1-17/64 1.2656 4-3/8 7 11-9/32 1.2812 4-3/8 7 1
1-19/64 1.2969 4-3/8 7 11-5/16 1.3125 4-3/8 7 1
1-21/64 1.3281 4-1/2 7-1/8 11-11/32 1.3438 4-1/2 7-1/8 11-23/64 1.3594 4-1/2 7-1/8 11-3/8 1.3750 4-1/2 7-1/8 1
1-13/32 1.4062 4-3/4 7-3/8 11-27/64 1.4219 4-3/4 7-3/8 11-7/16 1.4375 4-3/4 7-3/8 1
1-29/64 1.4531 4-7/8 7-1/2 11-15/32 1.4688 4-7/8 7-1/2 11-31/64 1.4844 4-7/8 7-1/2 11-1/2 1.5000 4-7/8 7-1/2 1
1-17/32 1.5312 4-7/8 7-3/4 11-9/16 1.5625 4-7/8 7-3/4 1
1-19/32 1.5938 4-7/8 7-3/4 11-5/8 1.6250 4-7/8 7-3/4 1
1-21/32 1.6562 5-1/8 8 11-11/16 1.6875 5-1/8 8 11-23/32 1.7188 5-1/8 8 11-3/4 1.7500 5-1/8 8 1
1-25/32 1.7812 5-3/8 8-1/4 11-13/16 1.8125 5-3/8 8-1/4 11-27/32 1.8438 5-3/8 8-1/4 11-7/8 1.8750 5-3/8 8-1/4 1
1-29/32 1.9062 5-5/8 8-1/2 11-15/16 1.9375 5-5/8 8-1/2 11-31/32 1.9688 5-5/8 8-1/2 1
2 2.0000 5-5/8 8-1/2 12-1/16 2.0625 5-5/8 8-1/2 12-1/8 2.1250 5-5/8 8-1/2 1
2-3/16 2.1875 5-5/8 8-1/2 12-1/4 2.2500 5-5/8 8-1/2 1
2-5/16 2.3125 5-5/8 8-1/2 12-3/8 2.3750 5-5/8 8-1/2 1
2-7/16 2.4375 5-5/8 8-1/2 12-1/2 2.5000 5-5/8 8-1/2 1
SCREW MACHINE LENGTH DRILLSOxide Finish, / TIN Coated
• Continued
Series S400 • HSS, Oxide Finish, 135° Split PointSeries S400-TI • TIN Coated, 135° Split Point
33
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SCREW MACHINE LENGTH DRILLSOxide Finish / TIN Coated
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
31 .1200 7/8 1-7/8 1232 .1160 7/8 1-7/8 1233 .1130 7/8 1-7/8 1234 .1110 7/8 1-7/8 1235 .1100 7/8 1-7/8 1236 .1065 13/16 1-13/16 1237 .1040 13/16 1-13/16 1238 .1015 13/16 1-13/16 1239 .0995 13/16 1-13/16 1240 .0980 13/16 1-13/16 1241 .0960 13/16 1-13/16 1242 .0935 3/4 1-3/4 1243 .0890 3/4 1-3/4 1244 .0860 3/4 1-3/4 1245 .0820 3/4 1-3/4 1246 .0810 3/4 1-3/4 1247 .0785 3/4 1-3/4 1248 .0760 11/16 1-11/16 1249 .0730 11/16 1-11/16 1250 .0700 11/16 1-11/16 1251 .0670 11/16 1-11/16 1252 .0635 11/16 1-11/16 1253 .0595 5/8 1-5/8 1254 .0550 5/8 1-5/8 1255 .0520 5/8 1-5/8 1256 .0465 1/2 1-3/8 1257 .0430 1/2 1-3/8 1258 .0420 1/2 1-3/8 1259 .0410 1/2 1-3/8 1260 .0400 1/2 1-3/8 1261 .0390 1/2 1-1/4 12
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 1-5/16 2-7/16 122 .2210 1-5/16 2-7/16 123 .2130 1-1/4 2-3/8 124 .2090 1-1/4 2-3/8 125 .2055 1-1/4 2-3/8 126 .2040 1-1/4 2-3/8 127 .2010 1-3/16 2-1/4 128 .1990 1-3/16 2-1/4 129 .1960 1-3/16 2-1/4 12
10 .1935 1-3/16 2-1/4 1211 .1910 1-3/16 2-1/4 1212 .1890 1-3/16 2-1/4 1213 .1850 1-1/8 2-3/16 1214 .1820 1-1/8 2-3/16 1215 .1800 1-1/8 2-3/16 1216 .1770 1-1/8 2-3/16 1217 .1730 1-1/8 2-3/16 1218 .1695 1-1/16 2-1/8 1219 .1660 1-1/16 2-1/8 1220 .1610 1-1/16 2-1/8 1221 .1590 1-1/16 2-1/8 1222 .1570 1-1/16 2-1/8 1223 .1540 1 2-1/16 1224 .1520 1 2-1/16 1225 .1495 1 2-1/16 1226 .1470 1 2-1/16 1227 .1440 1 2-1/16 1228 .1405 15/16 1-15/16 1229 .1360 15/16 1-15/16 1230 .1285 15/16 1-15/16 12
Series S404 • HSS, Oxide Finish, 135° Split PointSeries S404-TI • TIN Coated, 135° Split Point
• Wire Gauge Sizes
34Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS SCREW MACHINE LENGTH DRILLSOxide Finish / TIN Coated
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 1-5/16 2-7/16 12B .2380 1-3/8 2-1/2 12C .2420 1-3/8 2-1/2 12D .2460 1-3/8 2-1/2 12E .2500 1-3/8 2-1/2 12F .2570 1-7/16 2-5/8 12G .2610 1-7/16 2-5/8 12H .2660 1-1/2 2-11/16 12I .2720 1-1/2 2-11/16 6J .2770 1-1/2 2-11/16 6K .2810 1-1/2 2-11/16 6L .2900 1-9/16 2-3/4 6M .2950 1-9/16 2-3/4 6N .3020 1-5/8 2-13/16 6O .3160 1-11/16 2-15/16 6P .3230 1-11/16 2-15/16 6Q .3320 1-11/16 3 6R .3390 1-11/16 3 6S .3480 1-3/4 3-1/16 6T .3580 1-3/4 3-1/16 6U .3680 1-13/16 3-1/8 6V .3770 1-7/8 3-1/4 6W .3860 1-7/8 3-1/4 6X .3970 1-15/16 3-5/16 6Y .4040 1-15/16 3-5/16 6Z .4130 2 3-3/8 6
Series S402 • HSS, Oxide Finish, 135° Split Point
• Letter Sizes
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
35
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
15/32 .4688 2-1/8 3-5/8 631/64 .4844 2-3/16 3-11/16 61/2 .5000 2-1/4 3-3/4 6
33/64 .5156 2-3/8 3-7/8 117/32 .5312 2-3/8 3-7/8 135/64 .5469 2-1/2 4 19/16 .5625 2-1/2 4 137/64 .5781 2-5/8 4-1/8 119/32 .5938 2-5/8 4-1/8 139/64 .6094 2-3/4 4-1/4 15/8 .6250 2-3/4 4-1/4 1
41/64 .6406 2-7/8 4-1/2 121/32 .6562 2-7/8 4-1/2 143/64 .6719 2-7/8 4-5/8 111/16 .6875 2-7/8 4-5/8 145/64 .7031 3 4-3/4 123/32 .7188 3 4-3/4 147/64 .7344 3-1/8 5 13/4 .7500 3-1/8 5 1
49/64 .7656 3-1/4 5-1/8 125/32 .7812 3-1/4 5-1/8 151/64 .7969 3-3/8 5-1/4 113/16 .8125 3-3/8 5-1/4 153/64 .8281 3-1/2 5-3/8 127/32 .8438 3-1/2 5-3/8 155/64 .8594 3-1/2 5-1/2 17/8 .8750 3-1/2 5-1/2 1
57/64 .8906 3-5/8 5-5/8 129/32 .9062 3-5/8 5-5/8 159/64 .9219 3-3/4 5-3/4 115/16 .9375 3-3/4 5-3/4 161/64 .9531 3-7/8 5-7/8 131/32 .9688 3-7/8 5-7/8 163/64 .9844 4 6 11-3/8 1.0000 4 6 11-3/8 1.3750 4-1/2 7-1/8 1
SCREW MACHINE LENGTH DRILLSCobalt Heavy Duty, 135o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
3/64 .0469 1/2 1-3/8 121/16 .0625 5/8 1-5/8 125/64 .0781 11/16 1-11/16 123/32 .0938 3/4 1-3/4 127/64 .1094 13/16 1-13/16 121/8 .1250 7/8 1-7/8 12
9/64 .1406 15/16 1-15/16 125/32 .1562 1 2-1/16 1211/64 .1719 1-1/16 2-1/8 123/16 .1875 1-1/8 2-3/16 1213/64 .2031 1-3/16 2-1/4 127/32 .2188 1-1/4 2-3/8 1215/64 .2344 1-5/16 2-7/16 121/4 .2500 1-3/8 2-1/2 12
17/64 .2656 1-7/16 2-5/8 129/32 .2812 1-1/2 2-11/16 619/64 .2969 1-9/16 2-3/4 65/16 .3125 1-5/8 2-13/16 621/64 .3281 1-11/16 2-15/16 611/32 .3438 1-11/16 3 623/64 .3594 1-3/4 3-1/16 6
3/8 .3750 1-13/16 3-1/8 625/64 .3906 1-7/8 3-1/4 613/32 .4062 1-15/16 3-5/16 627/64 .4219 2 3-3/8 67/16 .4375 2-1/16 3-7/16 629/64 .4531 2-1/8 3-9/16 657/64 .8906 3-5/8 5-5/8 129/32 .9062 3-5/8 5-5/8 159/64 .9219 3-3/4 5-3/4 115/16 .9375 3-3/4 5-3/4 161/64 .9531 3-7/8 5-7/8 131/32 .9688 3-7/8 5-7/8 163/64 .9844 4 6 11-3/8 1.0000 4 6 11-3/8 1.3750 4-1/2 7-1/8 1
Series SC400-I • Fractional Sizes (Import)Series SC400-D • Fractional Sizes (USA)
36Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 1-5/16 2-7/16 12B .2380 1-3/8 2-1/2 12C .2420 1-3/8 2-1/2 12D .2460 1-3/8 2-1/2 12E .2500 1-3/8 2-1/2 12F .2570 1-7/16 2-5/8 12G .2610 1-7/16 2-5/8 12H .2660 1-1/2 2-11/16 12I .2720 1-1/2 2-11/16 6J .2770 1-1/2 2-11/16 6K .2810 1-1/2 2-11/16 6L .2900 1-9/16 2-3/4 6M .2950 1-9/16 2-3/4 6N .3020 1-5/8 2-13/16 6O .3160 1-11/16 2-15/16 6P .3230 1-11/16 2-15/16 6Q .3320 1-11/16 3 6R .3390 1-11/16 3 6S .3480 1-3/4 3-1/16 6T .3580 1-3/4 3-1/16 6U .3680 1-13/16 3-1/8 6V .3770 1-7/8 3-1/4 6W .3860 1-7/8 3-1/4 6X .3970 1-15/16 3-5/16 6Y .4040 1-15/16 3-5/16 6Z .4130 2 3-3/8 6
SCREW MACHINE LENGTH DRILLSCobalt Heavy Duty, 135o Split Point
Series SC402-I • Letter Sizes (Import)Series SC402-D • Letter Sizes (USA)
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
37
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SCREW MACHINE LENGTH DRILLSCobalt Heavy Duty, 135o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
31 .1200 7/8 1-7/8 1232 .1160 7/8 1-7/8 1233 .1130 7/8 1-7/8 1234 .1110 7/8 1-7/8 1235 .1100 7/8 1-7/8 1236 .1065 13/16 1-13/16 1237 .1040 13/16 1-13/16 1238 .1015 13/16 1-13/16 1239 .0995 13/16 1-13/16 1240 .0980 13/16 1-13/16 1241 .0960 13/16 1-13/16 1242 .0935 3/4 1-3/4 1243 .0890 3/4 1-3/4 1244 .0860 3/4 1-3/4 1245 .0820 3/4 1-3/4 1246 .0810 3/4 1-3/4 1247 .0785 3/4 1-3/4 1248 .0760 11/16 1-11/16 1249 .0730 11/16 1-11/16 1250 .0700 11/16 1-11/16 1251 .0670 11/16 1-11/16 1252 .0635 11/16 1-11/16 1253 .0595 5/8 1-5/8 1254 .0550 5/8 1-5/8 1255 .0520 5/8 1-5/8 1256 .0465 1/2 1-3/8 1257 .0430 1/2 1-3/8 1258 .0420 1/2 1-3/8 1259 .0410 1/2 1-3/8 1260 .0400 1/2 1-3/8 12
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 1-5/16 2-7/16 122 .2210 1-5/16 2-7/16 123 .2130 1-1/4 2-3/8 124 .2090 1-1/4 2-3/8 125 .2055 1-1/4 2-3/8 126 .2040 1-1/4 2-3/8 127 .2010 1-3/16 2-1/4 128 .1990 1-3/16 2-1/4 129 .1960 1-3/16 2-1/4 1210 .1935 1-3/16 2-1/4 1211 .1910 1-3/16 2-1/4 1212 .1890 1-3/16 2-1/4 1213 .1850 1-1/8 2-3/16 1214 .1820 1-1/8 2-3/16 1215 .1800 1-1/8 2-3/16 1216 .1770 1-1/8 2-3/16 1217 .1730 1-1/8 2-3/16 1218 .1695 1-1/16 2-1/8 1219 .1660 1-1/16 2-1/8 1220 .1610 1-1/16 2-1/8 1221 .1590 1-1/16 2-1/8 1222 .1570 1-1/16 2-1/8 1223 .1540 1 2-1/16 1224 .1520 1 2-1/16 1225 .1495 1 2-1/16 1226 .1470 1 2-1/16 1227 .1440 1 2-1/16 1228 .1405 15/16 1-15/16 1229 .1360 15/16 1-15/16 1230 .1285 15/16 1-15/16 12
Series SC404-I • Wire Gauge Sizes (Import)Series SC404-D • Wire Gauge Sizes (USA)
38Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS SCREW MACHINE LENGTH DRILLSLeft Hand, 118o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
3/64 .0469 1/2 1-3/8 121/16 .0625 5/8 1-5/8 125/64 .0781 11/16 1-11/16 123/32 .0938 3/4 1-3/4 127/64 .1094 13/16 1-13/16 121/8 .1250 7/8 1-7/8 129/64 .1406 15/16 1-15/16 125/32 .1562 1 2-1/16 1211/64 .1719 1-1/16 2-1/8 123/16 .1875 1-1/8 2-3/16 12
13/64 .2031 1-3/16 2-1/4 127/32 .2188 1-1/4 2-3/8 1215/64 .2344 1-5/16 2-7/16 12
1/4 .2500 1-3/8 2-1/2 1217/64 .2656 1-7/16 2-5/8 129/32 .2812 1-1/2 2-11/16 619/64 .2969 1-9/16 2-3/4 65/16 .3125 1-5/8 2-13/16 6
21/64 .3281 1-11/16 2-15/16 611/32 .3438 1-11/16 3 623/64 .3594 1-3/4 3-1/16 6
3/8 .3750 1-13/16 3-1/8 625/64 .3906 1-7/8 3-1/4 613/32 .4062 1-15/16 3-5/16 627/64 .4219 2 3-3/8 67/16 .4375 2-1/16 3-7/16 629/64 .4531 2-1/8 3-9/16 615/32 .4688 2-1/8 3-5/8 631/64 .4844 2-3/16 3-11/16 6
1/2 .5000 2-1/4 3-3/4 633/64 .5156 2-3/8 3-7/8 117/32 .5312 2-3/8 3-7/8 135/64 .5469 2-1/2 4 19/16 .5625 2-1/2 4 137/64 .5781 2-5/8 4-1/8 119/32 .5938 2-5/8 4-1/8 1
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
39/64 .6094 2-3/4 4-1/4 15/8 .6250 2-3/4 4-1/4 1
41/64 .6406 2-7/8 4-1/2 121/32 .6562 2-7/8 4-1/2 143/64 .6719 2-7/8 4-5/8 111/16 .6875 2-7/8 4-5/8 145/64 .7031 3 4-3/4 123/32 .7188 3 4-3/4 147/64 .7344 3-1/8 5 13/4 .7500 3-1/8 5 1
49/64 .7656 3-1/4 5-1/8 125/32 .7812 3-1/4 5-1/8 151/64 .7969 3-3/8 5-1/4 113/16 .8125 3-3/8 5-1/4 153/64 .8281 3-1/2 5-3/8 127/32 .8438 3-1/2 5-3/8 155/64 .8594 3-1/2 5-1/2 17/8 .8750 3-1/2 5-1/2 1
57/64 .8906 3-5/8 5-5/8 129/32 .9062 3-5/8 5-5/8 159/64 .9219 3-3/4 5-3/4 115/16 .9375 3-3/4 5-3/4 161/64 .9531 3-7/8 5-7/8 131/32 .9688 3-7/8 5-7/8 163/64 .9844 4 6 1
1 1.0000 4 6 11-1/32 1.0312 4 6-1/4 11-1/16 1.0625 4 6-1/4 11-1/8 1.1250 4 6-3/8 1
1-5/32 1.1562 4-1/4 6-5/8 11-3/16 1.1875 4-1/4 6-5/8 1
1-15/64 1.2344 4-3/8 6-3/4 11-1/4 1.2500 4-3/8 6-3/4 1
1-9/32 1.2812 4-3/8 7 11-11/32 1.3438 4-1/2 7-1/8 1
Series S400-L • Fractional Sizes
39
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SCREW MACHINE LENGTH DRILLSLeft Hand, 118o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
A .2340 1-5/16 2-7/16 12B .2380 1-3/8 2-1/2 12C .2420 1-3/8 2-1/2 12D .2460 1-3/8 2-1/2 12E .2500 1-3/8 2-1/2 12F .2570 1-7/16 2-5/8 12G .2610 1-7/16 2-5/8 12H .2660 1-1/2 2-11/16 12I .2720 1-1/2 2-11/16 6J .2770 1-1/2 2-11/16 6K .2810 1-1/2 2-11/16 6L .2900 1-9/16 2-3/4 6M .2950 1-9/16 2-3/4 6N .3020 1-5/8 2-13/16 6O .3160 1-11/16 2-15/16 6P .3230 1-11/16 2-15/16 6Q .3320 1-11/16 3 6R .3390 1-11/16 3 6S .3480 1-3/4 3-1/16 6T .3580 1-3/4 3-1/16 6U .3680 1-13/16 3-1/8 6V .3770 1-7/8 3-1/4 6W .3860 1-7/8 3-1/4 6X .3970 1-15/16 3-5/16 6Y .4040 1-15/16 3-5/16 6Z .4130 2 3-3/8 6
Series S402L • Letter Size
WE ALSOOFFER SPECIAL
SIZES ANDCUTTING TOOL
ALTERATIONSERVICES.
40Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS SCREW MACHINE LENGTH DRILLSLeft Hand, 118o Split Point
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
33 .1130 7/8 1-7/8 1234 .1110 7/8 1-7/8 1235 .1100 7/8 1-7/8 1236 .1065 13/16 1-13/16 1237 .1040 13/16 1-13/16 1238 .1015 13/16 1-13/16 1239 .0995 13/16 1-13/16 1240 .0980 13/16 1-13/16 1241 .0960 13/16 1-13/16 1242 .0935 3/4 1-3/4 1243 .0890 3/4 1-3/4 1244 .0860 3/4 1-3/4 1245 .0820 3/4 1-3/4 1246 .0810 3/4 1-3/4 1247 .0785 3/4 1-3/4 1248 .0760 11/16 1-11/16 1249 .0730 11/16 1-11/16 1250 .0700 11/16 1-11/16 1251 .0670 11/16 1-11/16 1252 .0635 11/16 1-11/16 1253 .0595 5/8 1-5/8 1254 .0550 5/8 1-5/8 1255 .0520 5/8 1-5/8 1256 .0465 1/2 1-3/8 1257 .0430 1/2 1-3/8 1258 .0420 1/2 1-3/8 1259 .0410 1/2 1-3/8 1260 .0400 1/2 1-3/8 1273 .0240 3/16 15/16 1277 .0180 3/16 15/16 1280 .0135 3/16 15/16 12
Size Decimal Equiv.
Flute Length OAL Pkg
Qty
1 .2280 1-5/16 2-7/16 122 .2210 1-5/16 2-7/16 123 .2130 1-1/4 2-3/8 124 .2090 1-1/4 2-3/8 125 .2055 1-1/4 2-3/8 126 .2040 1-1/4 2-3/8 127 .2010 1-3/16 2-1/4 128 .1990 1-3/16 2-1/4 129 .1960 1-3/16 2-1/4 1210 .1935 1-3/16 2-1/4 1211 .1910 1-3/16 2-1/4 1212 .1890 1-3/16 2-1/4 1213 .1850 1-1/8 2-3/16 1214 .1820 1-1/8 2-3/16 1215 .1800 1-1/8 2-3/16 1216 .1770 1-1/8 2-3/16 1217 .1730 1-1/8 2-3/16 1218 .1695 1-1/16 2-1/8 1219 .1660 1-1/16 2-1/8 1220 .1610 1-1/16 2-1/8 1221 .1590 1-1/16 2-1/8 1222 .1570 1-1/16 2-1/8 1223 .1540 1 2-1/16 1224 .1520 1 2-1/16 1225 .1495 1 2-1/16 1226 .1470 1 2-1/16 1227 .1440 1 2-1/16 1228 .1405 15/16 1-15/16 1229 .1360 15/16 1-15/16 1230 .1285 15/16 1-15/16 1231 .1200 7/8 1-7/8 1232 .1160 7/8 1-7/8 12
Series S404-L • Wire Gauge Sizes
41
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REDUCED SHANK DRILLS
• 1/2” Shank - Silver and Deming• Fractional Sizes• Metric Sizes
Size Decimal Equiv.
1/2 .500033/64 .515617/32 .531235/64 .54699/16 .5625
37/64 .578119/32 .593839/64 .6094
5/8 .625041/64 .640621/32 .656243/64 .671911/16 .687545/64 .703123/32 .718847/64 .7344
3/4 .750049/64 .765625/32 .781251/64 .796913/16 .812553/64 .828127/32 .843855/64 .8594
7/8 .875057/64 .890629/32 .906259/64 .921915/16 .937561/64 .953131/32 .968863/64 .9844
1 1.0000
Size Decimal Equiv.
1-1/64 1.01561-1/32 1.03121-3/64 1.04691-1/16 1.06251-5/64 1.07811-3/32 1.09381-7/64 1.10941-1/8 1.12501-9/64 1.14061-5/32 1.15621-11/64 1.17191-3/16 1.18751-13/64 1.20311-7/32 1.21881-15/64 1.23441-1/4 1.2500
1-17/64 1.26561-9/32 1.28121-19/64 1.29691-5/16 1.31251-21/64 1.32811-11/32 1.34381-23/64 1.35941-3/8 1.3750
1-25/64 1.39061-13/32 1.40621-27/64 1.42191-7/16 1.43751-29/64 1.45311-15/32 1.46881-31/64 1.48441-1/2 1.5000
SERIES 1090M (IMPORT)METRIC HSS S&D
Series C1080 • Cobalt, USASeries C1090 • Cobalt, Import
Size Decimal Equiv.
13.00 .511813.50 .531514.00 .551214.50 .570915.00 .590615.50 .610216.00 .629916.50 .649617.00 .669317.50 .689018.00 .708718.50 .728319.00 .748019.50 .767720.00 .787420.50 .807121.00 .826821.50 .846522.00 .866122.50 .885823.00 .905523.50 .925224.00 .944924.50 .964625.00 .984325.50 1.003926.00 1.023626.50 1.043327.00 1.063027.50 1.0827
Size Decimal Equiv.
28.00 1.102428.50 1.122029.00 1.141729.50 1.161430.00 1.181130.50 1.200831.50 1.240232.00 1.259832.50 1.279533.00 1.299233.50 1.318934.00 1.338634.50 1.358335.00 1.378035.50 1.397636.00 1.417336.50 1.437037.00 1.456737.50 1.476438.00 1.4961
Metric SizesFractional Sizes Metric Sizes
Series 1080 • HSS, (USA)Series 1090 • HSS, (Import)
SERIES 1090MC (IMPORT) METRIC COBALT S&D
Size Decimal Equiv.
13.00 .511813.50 .531514.00 .551214.50 .570915.00 .590615.50 .610216.00 .629916.50 .649617.00 .669317.50 .689018.00 .708718.50 .728319.00 .748019.50 .767720.00 .787420.50 .807121.00 .826821.50 .846522.00 .866122.50 .885823.00 .905523.50 .925224.00 .944924.50 .964625.00 .984325.50 1.003926.00 1.023626.50 1.043327.00 1.063027.50 1.0827
Size Decimal Equiv.
28.00 1.102428.50 1.122029.00 1.141729.50 1.161430.00 1.181130.50 1.200831.50 1.240232.00 1.259832.50 1.279533.00 1.299233.50 1.318934.00 1.338634.50 1.358335.00 1.378035.50 1.397636.00 1.417336.50 1.437037.00 1.456737.50 1.476438.00 1.4961
42Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LSREDUCED SHANK DRILLS
Size Decimal Equiv.
17/32 .53129/16 .562519/32 .59385/8 .6250
21/32 .656211/16 .687523/32 .71883/4 .7500
13/16 .81257/8 .8750
15/16 .93751 1.0000
Size Decimal Equiv.
17/64 .26569/32 .281219/64 .29695/16 .312521/64 .328111/32 .343823/64 .35943/8 .3750
25/64 .390613/32 .406227/64 .42197/16 .437529/64 .453115/32 .468831/64 .48441/2 .5000
Size Decimal Equiv.
25/64 .390613/32 .406227/64 .42197/16 .437529/64 .453115/32 .468831/64 .48441/2 .5000
33/64 .515617/32 .531235/64 .54699/16 .5625
Size Decimal Equiv.
37/64 .578119/32 .593839/64 .60945/8 .6250
41/64 .640621/32 .656243/64 .671911/16 .687545/64 .703123/32 .718847/64 .73443/4 .7500
Size Decimal Equiv.
25/32 .781213/16 .812527/32 .84387/8 .8750
29/32 .906215/16 .937531/32 .9688
1 1.00001-1/32 1.03121-1/16 1.06251-3/32 1.09381-1/8 1.1250
1-5/32 1.15621-3/16 1.1875
Size Decimal Equiv.
1-21/32 1.65621-11/16 1.68751-23/32 1.7188
1-3/4 1.75001-25/32 1.78121-13/16 1.81251-27/32 1.8438
1-7/8 1.87501-29/32 1.90621-15/16 1.93751-31/32 1.9688
2 2.0000
Size Decimal Equiv.
1-7/32 1.21881-1/4 1.2500
1-9/32 1.28121-5/16 1.31251-11/32 1.34381-3/8 1.3750
1-13/32 1.40621-7/16 1.43751-15/32 1.4688
1-1/2 1.50001-17/32 1.53121-9/16 1.56251-19/32 1.5938
1-5/8 1.6250
• 1/2” Shank - Silver and Deming• Black and Gold
Series 1090D Fractional Sizes (IMPORT)
• 1/4” Shank• Metal Working
Series 1075Fractional Sizes
• 3/4” Shank - Metal WorkingSeries 1034 • Fractional Sizes
• 3/8” Shank - Metal WorkingSeries 1038 • Fractional Sizes
Size Decimal Equiv.
17/32 .53129/16 .562519/32 .59385/8 .625
21/32 .656211/16 .687523/32 .71883/4 .7500
13/16 .81257/8 .875
15/16 .93751 1.0000
• 1/2” Shank - Silver and Deming• Black and Gold
Series 1080D Fractional Sizes (USA)
43
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
• Split Point
Series A700 • HSS, 6 Overall Length | Series AC700 • Cobalt, 6 Overall LengthSeries A712 • HSS, 12 Overall Length | Series AC712 • Cobalt, 12 Overall Length
AIRCRAFT EXTENSION DRILLS
Size Decimal Equiv.
Flute Length
1/16 .0625 7/852 .0635 7/851 .0670 150 .0700 149 .0730 148 .0760 1
5/64 .0781 147 .0785 146 .0810 1-1/845 .0820 1-1/844 .0860 1-1/843 .0890 1-1/442 .0935 1-1/4
3/32 .0938 1-1/441 .0960 1-3/840 .0980 1-3/839 .0995 1-3/838 .1015 1-7/1637 .1040 1-7/1636 .1065 1-7/16
7/64 .1094 1-1/235 .1100 1-1/234 .1110 1-1/233 .1130 1-1/232 .1160 1-5/831 .1200 1-5/81/8 .1250 1-5/830 .1285 1-5/829 .1360 1-3/428 .1405 1-3/4
9/64 .1406 1-3/427 .1440 1-7/826 .1470 1-7/825 .1495 1-7/824 .1520 223 .1540 2
Size Decimal Equiv.
Flute Length
5/32 .1562 222 .1570 2
21** .1590 2-1/820 .1610 2-1/819 .1660 2-1/818 .1695 2-1/8
11/64 .1719 2-1/817 .1730 2-3/1616 .1770 2-3/1615 .1800 2-3/1614 .1820 2-3/1613 .1850 2-5/16
3/16 .1875 2-5/1612 .1890 2-5/1611 .1910 2-5/1610 .1935 2-7/169 .1960 2-7/168 .1990 2-7/167 .2010 2-7/16
13/64 .2031 2-7/166 .2040 2-1/25 .2055 2-1/24 .2090 2-1/23 .2130 2-1/2
7/32 .2188 2-1/22 .2210 2-5/81 .2280 2-5/8A .2340 2-5/8
15/64 .2344 2-5/8B .2380 2-3/4C .2420 2-3/4D .2460 2-3/4
1/4 .2500 2-3/4F .2570 2-7/8G .2610 2-7/8
17/64 .2656 2-7/8
Size Decimal Equiv.
Flute Length
H .2660 2-7/8I .2720 2-7/8J .2770 2-7/8K .2810 2-15/16
9/32 .2812 2-15/16L .2900 2-15/16M .2950 3-1/16
19/64 .2969 3-1/16N .3020 3-1/16
5/16 .3125 3-3/16O .3160 3-3/16P .3230 3-5/16
21/64 .3281 3-5/16Q .3320 3-7/16R .3390 3-7/16
11/32 .3438 3-7/16S .3480 3-1/2T .3580 3-1/2
23/64 .3594 3-1/2U .3680 3-5/8
3/8 .3750 3-5/8V .3770 3-5/8W .3860 3-3/4
25/64 .3906 3-3/4X .3970 3-3/4Y .4040 3-7/8
13/32 .4062 3-7/8Z .4130 3-7/8
27/64 .4219 3-15/167/16 .4375 4-1/16
29/64 .4531 4-3/1615/32 .4688 4-5/1631/64 .4844 4-3/81/2 .5000 4-1/2G .2610 2-7/8
Quality Imports
44Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS EXTRA LONG DRILLSStraight Shank HSS, 118º Point
Size Decimal Equiv.
7/64 .10941/8 .12509/64 .14065/32 .156211/64 .17193/16 .1875
13/64 .20317/32 .2188
15/64 .23441/4 .2500
17/64 .26569/32 .2812
19/64 .29695/16 .3125
21/64 .328111/32 .343823/64 .35943/8 .3750
25/64 .390613/32 .406227/64 .42197/16 .4375
29/64 .453115/32 .468831/64 .48441/2 .5000
33/64 .515617/32 .531235/64 .5469
Size Decimal Equiv.
1/16 .06255/64 .07813/32 .09387/64 .10941/8 .12509/64 .14065/32 .156211/64 .17193/16 .1875
Size Decimal Equiv.
3/32 .09387/64 .10941/8 .12509/64 .14065/32 .156211/64 .17193/16 .187513/64 .20317/32 .218815/64 .23441/4 .2500
17/64 .26569/32 .281219/64 .29695/16 .312521/64 .328111/32 .343823/64 .35943/8 .3750
25/64 .390613/32 .406227/64 .42197/16 .437529/64 .453115/32 .468831/64 .48441/2 .5000
Size Decimal Equiv.
1/8 .12509/64 .14065/32 .156211/64 .17193/16 .187513/64 .20317/32 .218815/64 .23441/4 .2500
17/64 .26569/32 .281219/64 .29695/16 .312521/64 .328111/32 .343823/64 .35943/8 .3750
25/64 .390613/32 .406227/64 .42197/16 .437529/64 .453115/32 .468831/64 .48441/2 .5000
Size Decimal Equiv.
9/16 .562537/64 .578119/32 .593839/64 .60945/8 .6250
41/64 .640621/32 .656243/64 .671911/16 .687545/64 .703123/32 .718847/64 .73443/4 .7500
49/64 .765625/32 .781251/64 .796913/16 .812553/64 .828127/32 .843855/64 .85947/8 .8750
57/64 .890629/32 .906259/64 .921915/16 .937561/64 .953131/32 .968863/64 .9844
1 1.0000
• 6” OAL• 4 Flute Length
Series 1206XL
• 12” OAL• 9 Flute Length
Series 1212XL
• 10” OAL• 7-1/2 Flute Length
Series 1210XL
• 8” OAL• 5-1/2 Flute Length
Series 1206XL
• 12 OAL• 1/2 Shank
Series 1212XLD-DCALL FOR PRICING
Quality Imports
45
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
EXTRA LONG DRILLSStraight Shank HSS, 118º Point
Size Decimal Equiv.
33/64 .515617/32 .531235/64 .54699/16 .562537/64 .578119/32 .593839/64 .60945/8 .6250
41/64 .640621/32 .656243/64 .671911/16 .687545/64 .703123/32 .718847/64 .73443/4 .7500
49/64 .765625/32 .781251/64 .796913/16 .812553/64 .828127/32 .843855/64 .85947/8 .8750
57/64 .890629/32 .906259/64 .921915/16 .937561/64 .953131/32 .968863/64 .9844
1 1.0000
Size Decimal Equiv.
3/16 .18757/32 .21881/4 .25009/32 .28125/16 .312511/32 .34383/8 .3750
13/32 .406211 mm .4331
7/16 .437529/64 .453115/32 .46881/2 .5000
17/32 .53129/16 .562519/32 .59385/8 .6250
21/32 .656211/16 .687523/32 .71883/4 .7500
25/32 .781213/16 .81257/8 .8750
15/16 .93751 1.0000
33/64 .5156
Size Decimal Equiv.
33/64 .515617/32 .531235/64 .54699/16 .562537/64 .578119/32 .593839/64 .60945/8 .6250
41/64 .640621/32 .656243/64 .671911/16 .687545/64 .703123/32 .718847/64 .73443/4 .7500
49/64 .765625/32 .781251/64 .796913/16 .812553/64 .828127/32 .843855/64 .85947/8 .8750
57/64 .890629/32 .906259/64 .921915/16 .937561/64 .953131/32 .968863/64 .9844
1 1.0000
Size Decimal Equiv.
1/8 .12505/32 .15623/16 .1875
13/64 .20317/32 .2188
15/64 .23441/4 .2500
17/64 .26569/32 .2812
19/64 .29695/16 .3125
21/64 .328111/32 .343823/64 .3594
3/8 .375025/64 .390613/32 .406227/64 .42197/16 .4375
29/64 .453115/32 .468831/64 .4844
1/2 .500033/64 .515617/32 .531235/64 .54699/16 .5625
37/64 .578119/32 .593839/64 .6094
5/8 .625041/64 .640621/32 .656243/64 .671911/16 .687545/64 .703123/32 .718847/64 .7344
3/4 .750049/64 .765625/32 .781251/64 .796913/16 .812553/64 .828127/32 .843855/64 .8594
7/8 .875057/64 .890629/32 .906259/64 .921915/16 .937561/64 .953131/32 .968863/64 .9844
1 1.0000
• 15” OAL• 11 Flute Length
Series 1215XL
• 18” OAL• 12 Flute Length
Series 1218XL
• 15” OAL• 11 Flute Length• 1/2” Shank
Series 1215XLD
• 18” OAL• 12 Flute Length• 1/2” Shank
Series 1218XLD
Quality Imports
46Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length
MorseTaper No.
5/32 .1562 7 111/64 .1719 7 113/64 .2031 7 17/32 .2188 7 1
15/64 .2344 7 11/4 .2500 7 1
9/32 .2812 7 119/64 .2969 7 121/64 .3281 7 123/64 .3594 7 13/8 .3750 7 1
7/16 .4375 7 129/64 .4531 7 115/32 .4688 7 131/64 .4844 6 21/2 .5000 6 2
33/64 .5156 6 217/32 .5312 6 29/16 .5625 6 2
37/64 .5781 6 219/32 .5938 6 25/8 .6250 6 2
Size Decimal Equiv.
Flute Length
MorseTaper No.
1/8 .1250 5 19/64 .1406 5 15/32 .1562 5 111/64 .1719 5 13/16 .1875 5 1
13/64 .2031 5 17/32 .2188 5 1
15/64 .2344 5 11/4 .2500 5 1
17/64 .2656 5 19/32 .2812 5 1
19/64 .2969 5 15/16 .3125 5 15/16 .3125 4 2
21/64 .3281 5 111/32 .3438 5 123/64 .3594 5 13/8 .3750 5 1
29/64 .4531 5 115/32 .4688 5 1
• 8” Overall LengthSeries 1208TS
• 10” Overall LengthSeries 1210TS
Quality Imports
47
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
FluteLength
Morse Taper No.
5/16 .3125 10 27/16 .4375 11 1
15/32 .4688 11 115/32 .4688 10 231/64 .4844 10 21/2 .5000 10 2
33/64 .5156 10 217/32 .5312 10 237/64 .5781 10 219/32 .5938 10 239/64 .6094 10 25/8 .6250 10 2
21/32 .6562 10 211/16 .6875 10 245/64 .7031 10 223/32 .7188 10 247/64 .7344 10 23/4 .7500 10 2
49/64 .7656 10 225/32 .7812 10 227/32 .8438 9 357/64 .8906 9 331/32 .9688 9 363/64 .9844 9 3
Size Decimal Equiv.
FluteLength
Morse Taper No.
1/8 .1250 9 15/32 .1562 9 111/64 .1719 9 13/16 .1875 9 1
13/64 .2031 9 17/32 .2188 9 1
15/64 .2344 9 11/4 .2500 9 1
17/64 .2656 9 19/32 .2812 9 1
19/64 .2969 9 15/16 .3125 9 1
21/64 .3281 9 111/32 .3432 9 123/64 .3594 9 13/8 .3750 9 1
25/64 .3906 9 113/32 .4062 9 127/64 .4219 9 17/16 .4375 9 1
29/64 .4531 9 115/32 .4688 9 131/64 .4844 8 21/2 .5000 8 2
33/64 .5156 8 217/32 .5312 8 235/64 .5469 8 29/16 .5625 8 2
37/64 .5781 8 219/32 .5938 8 239/64 .6094 8 25/8 .6250 8 2
41/64 .6406 8 221/32 .6562 8 243/64 .6719 8 211/16 .6875 8 245/64 .7031 8 223/32 .7188 8 247/64 .7344 8 23/4 .7500 8 2
49/64 .7656 8 249/64 .7656 7 325/32 .7812 8 225/32 .7812 7 351/64 .7969 7 313/16 .8125 7 353/64 .8281 7 327/32 .8438 7 3
Size Decimal Equiv.
FluteLength
Morse Taper No.
55/64 .8594 7 37/8 .8750 7 3
57/64 .8906 7 329/32 .9062 7 359/64 .9219 7 315/16 .9375 7 331/32 .9688 7 3
1 1.0000 7 3
• 12” Overall Length (continued)Series 1212TS
• 12” Overall LengthSeries 1212TS
• 14” Overall LengthSeries 1214TS
Quality Imports
48Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length
MorseTaper No.
3/16 .1875 12 113/64 .2031 12 17/32 .2188 12 1
15/64 .2344 12 11/4 .2500 12 1
17/64 .2656 12 19/32 .2812 12 1
19/64 .2969 12 15/16 .3125 12 1
21/64 .3281 12 111/32 .3438 12 123/64 .3594 12 13/8 .3750 12 1
25/64 .3906 12 113/32 .4062 12 127/64 .4219 12 17/16 .4375 12 1
29/64 .4531 12 115/32 .4688 12 131/64 .4844 11 21/2 .5000 11 2
33/64 .5156 11 217/32 .5312 11 235/64 .5469 12 135/64 .5469 11 29/16 .5625 11 2
37/64 .5781 11 219/32 .5938 11 239/64 .6094 11 25/8 .6250 11 2
41/64 .6406 11 221/32 .6562 11 243/64 .6719 11 211/16 .6875 11 245/64 .7031 11 223/32 .7188 11 2
Size Decimal Equiv.
Flute Length
MorseTaper No.
47/64 .7344 11 23/4 .7500 11 2
49/64 .7656 11 225/32 .7812 11 251/64 .7969 10 313/16 .8125 10 353/64 .8281 10 327/32 .8438 10 355/64 .8594 10 37/8 .8750 10 3
57/64 .8906 10 329/32 .9062 10 359/64 .9219 10 315/16 .9375 10 361/64 .9531 10 331/32 .9688 10 363/64 .9844 10 3
1 1.0000 10 31-1/64 1.0156 10 31-1/32 1.0312 10 31-3/64 1.0469 10 31-1/16 1.0625 10 31-5/64 1.0781 9 41-3/32 1.0938 9 41-7/64 1.1094 9 41-1/8 1.1250 9 4
1-9/64 1.1406 9 41-5/32 1.1562 9 41-11/64 1.1719 9 41-3/16 1.1875 10 31-3/16 1.1875 9 41-7/32 1.2188 9 41-15/64 1.2344 9 41-1/4 1.2500 9 4
• 15” Overall LengthSeries 1215TS
Quality Imports
49
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length
MorseTaper No.
1/4 .2500 15 117/64 .2656 15 19/32 .2812 15 1
19/64 .2969 15 15/16 .3125 15 1
21/64 .3281 15 111/32 .3438 15 123/64 .3594 15 13/8 .3750 15 1
25/64 .3906 15 113/32 .4062 15 127/64 .4219 15 17/16 .4375 15 1
29/64 .4531 15 115/32 .4688 15 131/64 .4844 14 21/2 .5000 14 2
33/64 .5156 14 217/32 .5312 14 235/64 .5469 14 29/16 .5625 14 2
37/64 .5781 14 219/32 .5938 14 239/64 .6094 14 25/8 .6250 14 2
41/64 .6406 14 221/32 .6562 14 243/64 .6719 14 211/16 .6875 14 245/64 .7031 14 223/32 .7188 14 247/64 .7344 14 23/4 .7500 14 2
49/64 .7656 14 225/32 .7812 14 251/64 .7969 13 313/16 .8125 13 353/64 .8281 13 327/32 .8438 13 355/64 .8564 13 3
Size Decimal Equiv.
Flute Length
MorseTaper No.
7/8 .8750 13 357/64 .8906 13 329/32 .9062 13 359/64 .9219 13 315/16 .9375 13 361/64 .9531 13 331/32 .9688 13 363/64 .9844 13 3
1 1.0000 13 31-1/64 1.0156 13 31-1/32 1.0312 13 31-3/64 1.0469 13 31-1/16 1.0625 13 31-5/64 1.0781 12 41-3/32 1.0938 12 41-7/64 1.1094 12 41-1/8 1.1250 12 4
1-9/64 1.1406 12 41-5/32 1.1562 12 41-11/64 1.1719 12 41-3/16 1.1875 12 41-7/32 1.2188 12 41-15/64 1.2344 12 41-1/4 1.2500 12 4
1-17/64 1.2656 12 41-9/32 1.2813 12 41-5/16 1.3125 12 41-11/32 1.3438 12 41-23/64 1.3594 12 41-3/8 1.3750 12 4
1-13/32 1.4062 12 41-7/16 1.4375 12 41-15/32 1.4688 12 41-1/2 1.5000 12 4
1-9/16 1.5625 10 51-5/8 1.6250 10 5
1-11/16 1.6875 10 51-3/4 1.7500 10 5
1-13/16 1.8125 10 51-7/8 1.8750 10 5
• 18” Overall LengthSeries 1218TS
Quality Imports
50Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length
Morse Taper No.
33/64 .5156 16 29/16 .5625 16 2
19/32 .5938 16 247/64 .7344 16 213/16 .8125 15 327/32 .8438 15 37/8 .8750 15 3
15/16 .9375 15 331/32 .9688 15 31-1/16 1.0625 15 31-3/32 1.0938 14 41-1/8 1.1250 14 41-3/16 1.1875 14 41-13/64 1.2031 14 41-7/32 1.2188 14 41-1/4 1.2500 14 4
1-11/32 1.3438 14 41-13/32 1.4062 14 41-7/16 1.4375 14 41-15/32 1.4688 14 41-3/4 1.7500 13 52-7/32 2.2188 13 5
• 20” Overall LengthSeries 1220TS
WE ALSOOFFER SPECIAL
SIZES ANDCUTTING TOOL
ALTERATIONSERVICES.
Quality Imports
51
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length
MorseTaper No.
3/8 .3750 21 125/64 .3906 21 113/32 .4062 21 127/64 .4219 21 17/16 .4375 21 129/64 .4531 21 115/32 .4688 21 131/64 .4844 20 21/2 .5000 20 2
33/64 .5156 20 217/32 .5312 20 235/64 .5469 20 29/16 .5625 20 237/64 .5781 20 219/32 .5938 20 239/64 .6094 20 25/8 .6250 20 2
41/64 .6406 20 221/32 .6562 20 243/64 .6719 20 211/16 .6875 20 245/64 .7031 20 223/32 .7188 20 247/64 .7344 20 23/4 .7500 20 2
49/64 .7656 20 225/32 .7812 20 251/64 .7969 19 313/16 .8125 19 353/64 .8281 19 327/32 .8438 19 355/64 .8594 19 33/4 .7500 14 2
49/64 .7656 14 225/32 .7812 14 251/64 .7969 13 313/16 .8125 13 353/64 .8281 13 327/32 .8438 13 355/64 .8564 13 37/8 .8750 19 3
57/64 .8906 19 329/32 .9062 19 359/64 .9219 19 315/16 .9375 19 361/64 .9531 19 331/32 .9688 19 363/64 .9844 19 3
1 1.0000 19 31-1/64 1.0156 19 31-1/32 1.0312 19 3
Size Decimal Equiv.
Flute Length
MorseTaper No.
1-3/64 1.0469 19 31-1/16 1.0625 19 31-5/64 1.0781 18 41-3/32 1.0938 18 41-1/8 1.1250 18 4
1-9/64 1.1406 18 41-5/32 1.1562 18 41-11/64 1.1719 18 41-3/16 1.1875 18 4
1-13/64 1.2031 18 41-7/32 1.2188 18 4
1-15/64 1.2344 18 41-1/4 1.2500 18 4
1-17/64 1.2656 18 41-9/32 1.2812 18 41-5/16 1.3125 18 41-11/32 1.3438 18 41-23/64 1.3594 18 41-3/8 1.3750 18 4
1-13/32 1.4062 18 41-7/16 1.4375 18 4
1-15/32 1.4688 18 41-1/2 1.5000 18 4
1-9/16 1.5625 17 51-5/8 1.6250 17 5
1-11/16 1.6875 17 51-3/4 1.7500 17 5
1-25/32 1.7812 17 51-13/16 1.8125 17 51-7/8 1.8750 18 41-7/8 1.8750 17 5
1-15/16 1.9375 17 52 2.0000 18 42 2.0000 17 5
2-1/16 2.0625 17 52-1/8 2.1250 17 5
2-3/16 2.1875 17 52-7/32 2.2188 17 52-1/4 2.2500 17 5
2-5/16 2.3125 17 52-3/8 2.3750 17 5
2-7/16 2.4375 17 52-1/2 2.5000 17 5
2-9/16 2.5625 17 52-5/8 2.6250 17 5
2-11/16 2.6875 17 52-3/4 2.7500 17 5
2-13/16 2.8125 17 52-7/8 2.8750 17 5
2-15/16 2.9375 17 53 3.0000 17 5
• 20” Overall Length (continued)Series 1220TS
Quality Imports
52Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS EXTRA LONG DRILLSTaper Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length
Morse Taper No.
3/4 .7500 26 213/16 .8125 25 37/8 .8750 25 3
15/16 .9375 25 31 1.0000 25 3
1-1/16 1.0625 25 31-1/8 1.1250 24 41-3/16 1.1875 24 41-1/4 1.2500 24 41-5/16 1.3125 24 41-3/8 1.3750 24 41-7/16 1.4375 24 41-1/2 1.5000 24 41-9/16 1.5625 23 51-5/8 1.6250 23 5
1-11/16 1.6875 23 51-3/4 1.7500 23 5
1-13/16 1.8125 23 51-7/8 1.8750 23 5
1-15/16 1.9375 23 52 2.0000 23 5
2-1/16 2.0625 23 52-1/8 2.1250 23 52-3/16 2.1875 23 52-1/4 2.2500 23 52-5/16 2.3125 23 52-3/8 2.3750 23 52-7/16 2.4375 23 52-1/2 2.5000 23 52-5/8 2.6250 23 52-3/4 2.7500 23 52-7/8 2.8750 23 5
3 3.0000 23 53-1/8 3.1250 23 53-1/4 3.2500 23 53-3/8 3.3750 23 53-1/2 3.5000 23 5
Size Decimal Equiv.
Flute Length
Morse Taper No.
1-1/2 1.5000 30 41-3/4 1.7500 29 5
2 2.0000 29 52-1/8 2.1250 29 52-1/4 2.2500 29 52-3/8 2.3750 29 52-1/2 2.5000 29 52-5/8 2.6250 29 52-3/4 2.7500 29 5
3 3.0000 29 53-1/8 3.1250 29 53-1/4 3.2500 29 53-3/8 3.3750 29 53-1/2 3.5000 29 5
• 36” Overall LengthSeries 1236TS
• 30” Overall LengthSeries 1230TS
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
Quality Imports
53
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
TAPER SHANK DRILLSStandard Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.1/16 .0625 1-1/4 4-5/8 15/64 .0781 1-3/8 4-3/4 11/8 .1250 1-7/8 5-1/8 19/64 .1406 2-1/8 5-3/8 15/32 .1562 2-1/8 5-3/8 111/64 .1719 2-1/2 5-3/4 13/16 .1875 2-1/2 5-3/4 113/64 .2031 2-3/4 6 17/32 .2188 2-3/4 6 115/64 .2344 2-7/8 6-1/8 1
1/4 .2500 2-7/8 6-1/8 117/64 .2656 3 6-1/4 19/32 .2812 3 6-1/4 119/64 .2969 3-1/8 6-3/8 15/16 .3125 3-1/8 6-3/8 121/64 .3281 3-1/4 6-1/2 111/32 .3438 3-1/4 6-1/2 123/64 .3594 3-1/2 6-3/4 1
3/8 .3750 3-1/2 6-3/4 125/64 .3906 3-5/8 7 113/32 .4062 3-5/8 7 127/64 .4219 3-7/8 7-1/4 17/16 .4375 3-7/8 7-1/4 129/64 .4531 4-1/8 7-1/2 115/32 .4688 4-1/8 7-1/2 131/64 .4844 4-3/8 8-1/4 2
1/2 .5000 4-3/8 8-1/4 233/64 .5156 4-5/8 8-1/2 217/32 .5312 4-5/8 8-1/2 235/64 .5469 4-7/8 8-3/4 29/16 .5625 4-7/8 8-3/4 237/64 .5781 4-7/8 8-3/4 219/32 .5938 4-7/8 8-3/4 239/64 .6094 4-7/8 8-3/4 2
5/8 .6250 4-7/8 8-3/4 241/64 .6406 5-1/8 9 221/32 .6562 5-1/8 9 243/64 .6719 5-3/8 9-1/4 211/16 .6875 5-3/8 9-1/4 245/64 .7031 5-5/8 9-1/2 223/32 .7188 5-5/8 9-1/2 247/64 .7344 5-7/8 9-3/4 2
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.
3/4 .7500 5-7/8 9-3/4 149/64 .7656 6 9-7/8 125/32 .7812 6 9-7/8 151/64 .7969 6-1/8 10-3/4 113/16 .8125 6-1/8 10-3/4 153/64 .8281 6-1/8 10-3/4 127/32 .8438 6-1/8 10-3/4 155/64 .8594 6-1/8 10-3/4 17/8 .8750 6-1/8 10-3/4 1
57/64 .8906 6-1/8 10-3/4 129/32 .9062 6-1/8 10-3/4 159/64 .9219 6-1/8 10-3/4 115/16 .9375 6-1/8 10-3/4 161/64 .9531 6-3/8 11 131/32 .9688 6-3/8 11 163/64 .9844 6-3/8 11 1
1 1.0000 6-3/8 11 11-1/64 1.0156 6-1/2 11-1/8 11-1/32 1.0312 6-1/2 11-1/8 11-3/64 1.0469 6-5/8 11-1/4 11-1/16 1.0625 6-5/8 11-1/4 11-5/64 1.0781 6-7/8 12-1/2 11-3/32 1.0938 6-7/8 12-1/2 11-7/64 1.1094 7-1/8 12-3/4 11-1/8 1.1250 7-1/8 12-3/4 11-9/64 1.1406 7-1/4 12-7/8 21-5/32 1.1562 7-1/4 12-7/8 21-11/64 1.1719 7-3/8 13 21-3/16 1.1875 7-3/8 13 21-13/64 1.2031 7-1/2 13-1/8 21-7/32 1.2188 7-1/2 13-1/8 2
1-15/64 1.2344 7-7/8 13-1/2 21-1/4 1.2500 7-7/8 13-1/2 2
1-17/64 1.2656 8-1/2 14-1/8 21-9/32 1.2812 8-1/2 14-1/8 2
1-19/64 1.2969 8-5/8 14-1/4 21-5/16 1.3125 8-5/8 14-1/4 2
1-21/64 1.3281 8-3/4 14-3/8 21-11/32 1.3438 8-3/4 14-3/8 21-23/64 1.3594 8-7/8 14-1/2 21-3/8 1.3750 8-7/8 14-1/2 2
1-25/64 1.3906 9 14-5/8 2
Series HTD • Fractional Sizes
54Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS TAPER SHANK DRILLSStandard Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.
1-13/32 1.4062 9 14-5/8 41-27/64 1.4219 9-1/8 14-3/4 41-7/16 1.4375 9-1/8 14-3/4 4
1-29/64 1.4531 9-1/4 14-7/8 41-15/32 1.4688 9-1/4 14-7/8 41-31/64 1.4844 9-3/8 15 41-1/2 1.5000 9-3/8 15 4
1-33/64 1.5156 9-3/8 16-3/8 51-17/32 1.5312 9-3/8 16-3/8 51-35/64 1.5469 9-5/8 16-5/8 51-9/16 1.5625 9-5/8 16-5/8 5
1-37/64 1.5781 9-7/8 16-7/8 51-19/32 1.5938 9-7/8 16-7/8 51-39/64 1.6094 10 17 5
1-5/8 1.6250 10 17 51-41/64 1.6406 10-1/8 17-1/8 51-21/32 1.6562 10-1/8 17-1/8 51-43/64 1.6719 10-1/8 17-1/8 51-11/16 1.6875 10-1/8 17-1/8 51-45/64 1.7031 10-1/8 17-1/8 51-23/32 1.7188 10-1/8 17-1/8 51-47/64 1.7344 10-1/8 17-1/8 51-3/4 1.7500 10-1/8 17-1/8 5
1-49/64 1.7656 10-1/8 17-1/8 51-25/32 1.7812 10-1/8 17-1/8 51-51/64 1.7969 10-1/8 17-1/8 51-13/16 1.8125 10-1/8 17-1/8 51-53/64 1.8281 10-1/8 17-1/8 51-27/32 1.8438 10-1/8 17-1/8 51-55/64 1.8594 10-3/8 17-3/8 51-7/8 1.8750 10-3/8 17-3/8 5
1-57/64 1.8906 10-3/8 17-3/8 51-29/32 1.9062 10-3/8 17-3/8 51-59/64 1.9219 10-3/8 17-3/8 51-15/16 1.9375 10-3/8 17-3/8 51-61/64 1.9531 10-3/8 17-3/8 51-31/32 1.9688 10-3/8 17-3/8 51-63/64 1.9844 10-3/8 17-3/8 5
2 2.0000 10-3/8 17-3/8 52-1/64 2.0156 10-3/8 17-3/8 52-1/32 2.0312 10-3/8 17-3/8 52-3/64 2.0469 10-1/4 17-3/8 5
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.
2-1/16 2.0625 10-1/4 17-3/8 52-3/32 2.0938 10-1/4 17-3/8 52-1/8 2.1250 10-1/4 17-3/8 52-5/32 2.1562 10-1/4 17-3/8 52-3/16 2.1875 10-1/4 17-3/8 52-7/32 2.2188 10-1/8 17-3/8 52-1/4 2.2500 10-1/8 17-3/8 52-9/32 2.2812 10-1/8 17-3/8 52-5/16 2.3125 10-1/8 17-3/8 52-11/32 2.3438 10-1/8 17-3/8 52-3/8 2.3750 10-1/8 17-3/8 5
2-13/32 2.4062 11-1/4 18-3/4 52-7/16 2.4375 11-1/4 18-3/4 52-15/32 2.4688 11-1/4 18-3/4 52-1/2 2.5000 11-1/4 18-3/4 5
2-17/32 2.5312 11-7/8 19-1/2 52-9/16 2.5625 11-7/8 19-1/2 52-19/32 2.5938 11-7/8 19-1/2 52-5/8 2.6250 11-7/8 19-1/2 5
2-21/32 2.6562 12-3/4 20-3/8 52-11/16 2.6875 12-3/4 20-3/8 52-23/32 2.7188 12-3/4 20-3/8 52-3/4 2.7500 12-3/4 20-3/8 5
2-25/32 2.7812 13-3/8 21-1/8 52-13/16 2.8125 13-3/8 21-1/8 52-27/32 2.8438 13-3/8 21-1/8 52-7/8 2.8750 13-3/8 21-1/8 5
2-29/32 2.9062 13-3/8 21-1/8 52-15/16 2.9375 14 21-3/4 52-31/32 2.9688 14 21-3/4 5
3 3.0000 14 21-3/4 53-1/16 3.0625 14-5/8 24-1/2 63-1/8 3.1250 14-5/8 24-1/2 63-3/16 3.1875 14-5/8 24-1/2 63-1/4 3.2500 15-1/2 25-1/2 63-5/16 3.3125 15-1/2 25-1/2 63-3/8 3.3750 15-1/2 25-1/2 63-7/16 3.4375 15-1/2 25-1/2 63-1/2 3.5000 16-3/8 26-1/2 63-5/8 3.6250 16-3/8 26-1/2 63-3/4 3.7500 16-3/8 26-1/2 63-7/8 3.8750 16-3/8 26-1/2 6
4 4.0000 17-1/2 27-1/2 6
Series HTD • Fractional Sizes (continued)
55
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
TAPER SHANK DRILLStandard Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.
A .2340 2-7/8 6-1/8 1B .2380 2-7/8 6-1/8 1C .2420 2-7/8 6-1/8 1D .2460 2-7/8 6-1/8 1E .2500 2-7/8 6-1/8 1F .2570 3 6-1/4 1G .2610 3 6-1/4 1H .2660 3 6-1/4 1I .2720 3 6-1/4 1J .2770 3 6-1/4 1K .2810 3 6-1/4 1L .2900 3-1/8 6-3/8 1M .2950 3-1/8 6-3/8 1N .3020 3-1/8 6-3/8 1O .3160 3-1/4 6-1/2 1P .3230 3-1/4 6-1/2 1Q .3320 3-1/4 6-1/2 1R .3390 3-1/4 6-1/2 1S .3480 3-1/2 6-3/4 1T .3580 3-1/2 6-3/4 1U .3680 3-1/2 6-3/4 1V .3770 3-5/8 7 1W .3860 3-5/8 7 1X .3970 3-5/8 7 1Y .4040 3-5/8 7 1Z .4130 3-7/8 7-1/4 1
Size Decimal Equiv.
1 .22802 .22103 .21304 .20905 .20556 .20407 .20108 .19909 .196010 .193511 .191012 .189013 .185014 .182015 .180016 .177017 .173018 .169519 .166020 .161021 .159022 .157023 .154024 .152025 .149526 .147027 .144028 .140529 .136030 .128531 .120037 .104039 .099540 .098044 .086047 .0785
Series HTD • Letter Sizes Series HTD • Wire Gauge Sizes
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
Quality Imports
56Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS TAPER SHANK DRILLSLarger Than Standard Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.
21/64 .3281 3-1/2 7-3/8 223/64 .3594 3-1/2 7-3/8 23/8 .3750 3-1/2 7-3/8 2
25/64 .3906 3-5/8 7-1/2 213/32 .4062 3-5/8 7-1/2 227/64 .4219 3-7/8 7-3/4 27/16 .4375 3-7/8 7-3/4 229/64 .4531 4-1/8 8 215/32 .4688 4-1/8 8 241/64 .6406 5-1/8 9-3/4 321/32 .6562 5-1/8 9-3/4 343/64 .6719 5-3/8 10 311/16 .6875 5-3/8 10 345/64 .7031 5-5/8 10-1/4 323/32 .7188 5-5/8 10-1/4 347/64 .7344 5-7/8 10-1/2 33/4 .7500 5-7/8 10-1/2 3
49/64 .7656 6 10-5/8 325/32 .7812 6 10-5/8 3
1 1.0000 6-3/8 12 41-1/32 1.0312 6-1/2 12-1/8 41-1/16 1.0625 6-5/8 12-1/4 4
Series LHTD • Fractional Sizes
Quality Imports
57
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
TAPER SHANK DRILLSSmaller Than Standard Shank HSS, 118º Point
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.31/64 .4844 4-3/8 7-3/4 11/2 .5000 4-3/8 7-3/4 1
33/64 .5156 4-5/8 8 117/32 .5312 4-5/8 8 135/64 .5469 4-7/8 8-1/4 19/16 .5625 4-7/8 8-1/4 137/64 .5781 4-7/8 8-1/4 121/32 .6562 5-1/8 9-3/4 151/64 .7969 6-1/8 10 213/16 .8125 6-1/8 10 253/64 .8281 6-1/8 10 227/32 .8438 6-1/8 10 255/64 .8594 6-1/8 10 27/8 .8750 6-1/8 10 2
57/64 .8906 6-1/8 10 229/32 .9062 6-1/8 10 2
1 1.0000 6-1/4 10-1/8 21-5/64 1.0781 6-7/8 11-1/2 31-3/32 1.0938 6-7/8 11-1/2 31-7/64 1.1094 7-1/8 11-3/4 31-1/8 1.1250 7-1/8 11-3/4 31-9/64 1.1406 7-1/4 11-7/8 31-5/32 1.1562 7-1/4 11-7/8 31-11/64 1.1719 7-3/8 12 31-3/16 1.1875 7-3/8 12 3
1-13/64 1.2031 7-1/2 12-1/8 31-7/32 1.2188 7-1/2 12-1/8 3
1-15/64 1.2344 7-7/8 12-1/2 31-1/4 1.2500 7-7/8 12-1/2 31-9/32 1.2812 8-1/2 13-1/8 31-5/16 1.3125 8-5/8 13-1/4 31-11/32 1.3438 8-3/4 13-3/8 31-3/8 1.3750 8-7/8 13-1/2 3
1-13/32 1.4062 9 13-5/8 31-7/16 1.4375 9-1/8 13-3/4 3
1-15/32 1.4688 9-1/4 13-7/8 31-1/2 1.5000 9-3/8 14 3
1-33/64 1.5156 9-3/8 15 41-17/32 1.5312 9-3/8 15 41-35/64 1.5469 9-5/8 15-1/4 41-9/16 1.5625 9-5/8 15-1/4 4
1-37/64 1.5781 9-7/8 15-1/2 41-19/32 1.5938 9-7/8 15-1/2 41-39/64 1.6094 10 15-5/8 4
1-5/8 1.6250 10 15-5/8 41-41/64 1.6406 10-1/8 15-3/4 41-21/32 1.6562 10-1/8 15-3/4 41-43/64 1.6719 10-1/8 15-3/4 4
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.1-23/32 1.7188 10-1/8 15-3/4 41-47/64 1.7344 10-3/8 16-1/4 4
1-3/4 1.7500 10-3/8 16-1/4 41-49/64 1.7656 10-3/8 16-1/4 41-25/32 1.7812 10-3/8 16-1/4 41-51/64 1.7969 10-3/8 16-1/4 41-13/16 1.8125 10-3/8 16-1/4 41-53/64 1.8281 10-3/8 16-1/4 41-27/32 1.8438 10-3/8 16-1/4 41-55/64 1.8594 10-1/2 16-1/2 4
1-7/8 1.8750 10-1/2 16-1/2 41-57/64 1.8906 10-1/2 16-1/2 41-29/32 1.9062 10-1/2 16-1/2 41-59/64 1.9219 10-5/8 16-5/8 41-15/16 1.9375 10-5/8 16-5/8 41-61/64 1.9531 10-5/8 16-5/8 41-31/32 1.9688 10-5/8 16-5/8 41-63/64 1.9844 10-5/8 16-5/8 4
2 2.0000 10-5/8 16-5/8 42-1/32 2.0312 10-3/8 16-1/4 42-1/16 2.0625 10-1/4 16-1/4 42-3/32 2.0938 10-1/4 16-1/4 42-1/8 2.1250 10-1/4 16-1/4 42-5/32 2.1562 10-1/4 16-1/4 42-3/16 2.1875 10-1/4 16-1/4 42-7/32 2.2188 10-1/8 16-1/8 42-1/4 2.2500 10-1/8 16-1/8 42-9/32 2.2812 10-1/8 16-1/8 42-5/16 2.3125 10-1/8 16-1/8 42-11/32 2.3438 10-1/8 16-1/8 42-3/8 2.3750 10-1/8 16-1/8 4
2-13/32 2.4062 11-1/4 17-1/4 42-7/16 2.4375 11-1/4 17-1/4 4
2-15/32 2.4688 11-1/4 17-1/4 42-1/2 2.5000 11-1/4 17-1/4 42-5/8 2.6250 11-7/8 18 42-3/4 2.7500 12-3/4 19-1/8 43-1/16 3.0625 14-1/4 22 53-1/8 3.1250 14-1/4 22 53-3/16 3.1875 14-1/4 22 53-1/4 3.2500 15-1/4 23 53-5/16 3.3125 15-1/4 23 53-3/8 3.3750 15-1/4 23 53-7/16 3.4375 15-1/4 23 53-1/2 3.5000 16-1/4 24 53-5/8 3.6250 16-1/4 24 53-3/4 3.7500 16-1/4 24 53-7/8 3.8750 16-1/4 24 5
4 4.0000 16-1/2 24-1/4 5
Series SHTD • Fractional Sizes
Quality Imports
58Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS TAPER SHANK DRILLSMetric HSS
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.3.00 .1181 1-7/8 5-1/8 13.20 .1260 1-7/8 5-1/8 13.50 .1378 2-1/8 5-3/8 13.80 .1496 2-1/8 5-3/8 14.00 .1575 2-1/8 5-3/8 14.20 .1654 2-1/2 5-3/4 14.50 .1772 2-1/2 5-3/4 14.80 .1890 2-1/2 5-3/4 15.00 .1969 2-3/4 6 15.20 .2047 2-3/4 6 15.50 .2165 2-3/4 6 15.80 .2283 2-7/8 6-1/8 16.00 .2362 2-7/8 6-1/8 16.20 .2441 2-7/8 6-1/8 16.50 .2559 3 6-1/4 16.80 .2677 3 6-1/4 17.00 .2756 3 6-1/4 17.20 .2835 3-1/8 6-3/8 17.50 .2953 3-1/8 6-3/8 17.80 .3071 3-1/8 6-3/8 18.00 .3150 3-1/4 6-1/2 18.20 .3228 3-1/4 6-1/2 18.50 .3346 3-1/4 6-1/2 18.80 .3465 3-1/2 6-3/4 19.00 .3543 3-1/2 6-3/4 19.20 .3622 3-1/2 6-3/4 19.50 .3740 3-1/2 6-3/4 19.80 .3858 3-5/8 7 110.00 .3937 3-5/8 7 110.20 .4016 3-5/8 7 110.50 .4134 3-7/8 7-1/4 110.80 .4252 3-7/8 7-1/4 111.00 .4331 3-7/8 7-1/4 111.20 .4409 4-1/8 7-1/2 111.50 .4528 4-1/8 7-1/2 111.80 .4646 4-1/8 7-1/2 112.00 .4724 4-3/8 8-1/4 212.20 .4803 4-3/8 8-1/4 212.50 .4921 4-3/8 8-1/4 212.80 .5039 4-5/8 8-1/2 213.00 .5118 4-5/8 8-1/2 213.20 .5197 4-5/8 8-1/2 2
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.13.50 .5315 4-5/8 8-1/2 213.80 .5433 4-7/8 8-3/4 214.00 .5512 4-7/8 8-3/4 214.25 .5610 4-7/8 8-3/4 214.50 .5709 4-7/8 8-3/4 214.75 .5807 4-7/8 8-3/4 215.00 .5906 4-7/8 8-3/4 215.25 .6004 4-7/8 8-3/4 215.50 .6102 4-7/8 8-3/4 215.75 .6201 4-7/8 8-3/4 216.00 .6299 5-1/8 9 216.25 .6398 5-1/8 9 216.50 .6496 5-1/8 9 216.75 .6594 5-3/8 9-1/4 217.00 .6693 5-3/8 9-1/4 217.25 .6791 5-3/8 9-1/4 217.50 .6890 5-5/8 9-1/2 218.00 .7087 5-5/8 9-1/2 218.50 .7283 5-5/8 9-1/2 219.00 .7480 5-7/8 9-3/4 219.50 .7677 6 9-7/8 220.00 .7874 6 9-7/8 320.50 .8071 6-1/8 10-3/4 321.00 .8268 6-1/8 10-3/4 321.50 .8465 6-1/8 10-3/4 322.00 .8661 6-1/8 10-3/4 322.50 .8858 6-1/8 10-3/4 323.00 .9055 6-1/8 10-3/4 323.50 .9252 6-1/8 10-3/4 324.00 .9449 6-3/8 11 324.50 .9646 6-3/8 11 325.00 .9843 6-3/8 11 325.50 1.0039 6-1/2 11-1/8 326.00 1.0236 6-1/2 11-1/8 326.50 1.0433 6-5/8 11-1/4 327.00 1.0630 6-5/8 11-1/4 327.50 1.0827 6-7/8 12-1/2 428.00 1.1024 7-1/8 12-3/4 428.50 1.1220 7-1/8 12-3/4 429.00 1.1417 7-1/4 12-7/8 429.50 1.1614 7-3/8 13 430.00 1.1811 7-3/8 13 4
Series MTD • Millimeter Sizes
Quality Imports
59
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
TAPER SHANK DRILLSMetric HSS
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.30.50 1.2008 7-1/2 13-1/8 431.00 1.2205 7-7/8 13-1/2 431.50 1.2402 7-7/8 13-1/2 432.00 1.2598 8-1/2 14-1/8 432.50 1.2795 8-1/2 14-1/8 433.00 1.2992 8-5/8 14-1/4 433.50 1.3189 8-3/4 14-3/8 434.00 1.3386 8-3/4 14-3/8 434.50 1.3583 8-7/8 14-1/2 435.00 1.3780 9 8 14-5/8 435.50 1.3976 9 8 14-5/8 436.00 1.4173 9-1/8 14-3/4 436.50 1.4370 9-1/8 14-3/4 437.00 1.4567 9-1/4 14-7/8 437.50 1.4764 9-3/8 15 438.00 1.4961 9-3/8 15 438.50 1.5157 9-5/8 16-5/8 539.00 1.5354 9-5/8 16-5/8 539.50 1.5551 9-7/8 16-7/8 540.00 1.5748 9-7/8 16-7/8 541.00 1.6142 10 8 17 541.50 1.6338 10-1/8 17-1/8 5
Series MTD • Millimeter Sizes
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.42.00 1.6535 10-1/8 17-1/8 542.50 1.6732 10-1/8 17-1/8 543.00 1.6929 10-1/8 17-1/8 543.50 1.7125 10-1/8 17-1/8 544.00 1.7323 10-1/8 17-1/8 544.50 1.7519 10-1/8 17-1/8 545.00 1.7717 10-1/8 17-1/8 546.00 1.8110 10-1/8 17-1/8 547.00 1.8504 10-3/8 17-3/8 548.00 1.8898 10-3/8 17-3/8 549.00 1.9291 10-3/8 17-3/8 550.00 1.9685 10-3/8 17-3/8 551.00 2.0079 10-3/8 17-3/8 555.00 2.1653 10-3/8 17-3/8 557.00 2.2441 10-3/8 17-3/8 559.00 2.3228 10-3/8 17-3/8 560.00 2.3622 11-7/8 19-1/2 565.00 2.5591 11-7/8 19-1/2 566.00 2.5984 11-7/8 19-1/2 569.00 2.7165 12-3/4 20-3/8 570.00 2.7559 13-3/8 21-1/8 572.00 2.8346 13-3/8 21-1/8 5
Quality Imports
60Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS TAPER SHANK DRILLSCobalt, Heavy Duty
Size Decimal Equiv.
Flute Length
MorseTaper No.
1/4 2-7/8 6-1/8 117/64 3 6-1/4 19/32 3 6-1/4 119/64 3-1/8 6-3/8 15/16 3-1/8 6-3/8 121/64 3-1/4 6-1/2 111/32 3-1/4 6-1/2 123/64 3-1/2 6-3/4 1
3/8 3-1/2 6-3/4 1*3/8 3-1/2 7-3/8 2
25/64 3-5/8 7-1/2 213/32 3-5/8 7-1/2 227/64 3-7/8 7-3/4 27/16 3-7/8 7-3/4 229/64 4-1/8 8 215/32 4-1/8 8 231/64 4-3/8 8-1/4 2
1/2 4-3/8 8-1/4 233/64 4-5/8 8-1/2 217/32 4-5/8 8-1/2 235/64 4-7/8 8-3/4 29/16 4-7/8 8-3/4 237/64 4-7/8 8-3/4 219/32 4-7/8 8-3/4 239/64 4-7/8 8-3/4 2
5/8 4-7/8 8-3/4 241/64 5-1/8 9-3/4 321/32 5-1/8 9-3/4 343/64 5-3/8 10 311/16 5-3/8 10 345/64 5-5/8 10-1/4 323/32 5-5/8 10-1/4 347/64 5-7/8 10-1/2 3
3/4 5-7/8 10-1/2 349/64 6 10-5/8 325/32 6 9-7/8 2*25/32 6 10-5/8 351/64 6-1/8 10-3/4 313/16 6-1/8 10 2*13/16 6-1/8 10-3/4 353/64 6-1/8 10-3/4 327/32 6-1/8 10-3/4 355/64 6-1/8 10-3/4 3
7/8 6-1/8 10-3/4 357/64 6-1/8 10-3/4 329/32 6-1/8 10-3/4 3
Size Decimal Equiv.
Flute Length
MorseTaper No.
59/64 6-1/8 10-3/4 315/16 6-1/8 10-3/4 361/64 6-3/8 11 331/32 6-3/8 11 363/64 6-3/8 11 3
1 6-3/8 11 31-1/64 6-1/2 12-1/8 41-1/32 6-1/2 12-1/8 41-3/64 6-5/8 12-1/4 41-1/16 6-5/8 12-1/4 41-5/64 6-7/8 12-1/2 41-3/32 6-7/8 12-1/2 41-7/64 7-1/8 12-3/4 41-1/8 7-1/8 12-3/4 41-9/64 7-1/4 12-7/8 41-5/32 7-1/4 12-7/8 41-11/64 7-3/8 13 41-3/16 7-3/8 12 3*1-3/16 7-3/8 13 41-13/64 7-1/2 13-1/8 41-7/32 7-1/2 13-1/8 41-15/64 7-7/8 13-1/2 41-1/4 7-7/8 13-1/2 4
1-17/64 8-1/2 14-1/8 41-9/32 8-1/2 14-1/8 41-19/64 8-5/8 14-1/4 41-5/16 8-5/8 14-1/4 4*1-5/16 8-5/8 15-7/8 51-21/64 8-3/4 14-3/8 41-11/32 8-3/4 14-3/8 41-23/64 8-7/8 14-1/2 41-3/8 8-7/8 14-1/2 4*1-3/8 8-7/8 15-7/8 5
1-25/64 9 14-5/8 41-13/32 9 14-5/8 41-27/64 9-1/8 14-3/4 41-7/16 9-1/8 14-3/4 4*1-7/16 9-1/8 16-1/8 51-29/64 9-1/4 14-7/8 41-15/32 9-1/4 14-7/8 41-31/64 9-3/8 15 41-1/2 9-3/8 15 4*1-1/2 9-3/8 16-3/8 51-5/8 10 17 51-3/4 10-1/8 17-1/8 5
1-13/16 10-1/8 17-1/8 52 10-3/8 17-3/8 5
Series CHTD • Fractional Sizes
61
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
CORE DRILLSStraight Shank HSS
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.1/4 .2500 3-3/4 6-1/8 2
17/64 .2656 3-7/8 6-1/4 29/32 .2812 3-7/8 6-1/4 25/16 .3125 4 6-3/8 211/32 .3438 4-1/8 6-1/2 223/64 .3594 4-1/4 6-3/4 2
3/8 .3750 4-1/4 6-3/4 213/32 .4062 4-3/8 7 27/16 .4375 4-5/8 7-1/4 215/32 .4688 4-3/4 7-1/2 231/64 .4844 4-3/4 7-3/4 2
1/2 .5000 4-3/4 7-3/4 217/32 .5312 4-3/4 8 29/16 .5625 4-7/8 8-1/4 219/32 .5938 4-7/8 8-3/4 2
5/8 .6250 4-7/8 8-3/4 221/32 .6562 5-1/8 9 211/16 .6875 5-3/8 9-1/4 223/32 .7188 5-5/8 9-1/2 2
3/4 .7500 5-7/8 9-3/4 225/32 .7812 6 9-7/8 27/8 .8750 6-1/8 10 3
29/32 .9062 6-1/8 10 331/32 .9688 6-3/8 11 31-7/16 1.4375 9-1/8 14-3/4 31-9/16 1.5625 9-5/8 15-1/4 31-5/8 1.6250 9-7/8 15-5/8 3
1-13/16 1.8125 10-1/2 16-1/4 31-27/32 1.8438 10-3/4 16-1/2 3
Size Decimal Equiv.
Flute Length
Morse Taper No.
13/32 .4062 4-3/8 727/64 .4219 4-5/8 7-1/47/16 .4375 4-5/8 7-1/429/64 .4531 4-3/4 7-1/215/32 .4688 4-3/4 7-1/21/2 .5000 4-3/4 7-3/4
33/64 .5156 4-3/4 817/32 .5312 4-3/4 89/16* .5625 4-7/8 8-1/419/32 .5938 4-7/8 8-3/45/8 .6250 4-7/8 8-3/4
41/64 .6406 5-1/8 921/32 .6562 5-1/8 911/16 .6875 5-3/8 9-1/423/32 .7188 5-5/8 9-1/23/4 .7500 5-7/8 9-3/4
49/64 .7656 6 9-7/825/32 .7812 6 9-7/813/16 .8125 6-1/8 1027/32 .8438 6-1/8 107/8 .8750 6-1/8 10
57/64 .8906 6-1/8 1029/32 .9062 6-1/8 1015/16 .9375 6-1/8 10-3/431/32 .9688 6-3/8 11
1 1.0000 6-3/8 111-1/32 1.0312 6-1/2 11-1/81-1/16 1.0625 6-5/8 11-1/41-3/32 1.0938 6-7/8 11-1/21-1/8 1.1250 7-1/8 11-3/41-9/64 1.1406 7-1/4 11-7/81-5/32 1.1562 7-1/4 11-7/81-3/16 1.1875 7-3/8 121-7/32 1.2188 7-1/2 12-1/81-1/4 1.2500 7-7/8 12-1/21-9/32 1.2812 8-1/2 14-1/81-5/16 1.3125 8-5/8 14-1/41-11/32 1.3438 8-3/4 14-3/81-3/8 1.3750 8-7/8 14-1/2
1-13/32 1.4062 9 8 14-5/81-7/16 1.4375 9-1/8 14-3/41-15/32 1.4688 9-1/4 14-7/8
1-1/2 1.5000 9-3/8 151-9/16 1.5625 9-5/8 15-1/41-5/8 1.6250 9-7/8 15-5/8
1-11/16 1.6875 10-1/8 161-3/4 1.7500 10-1/2 16-1/4
1-49/64 1.7656 10-1/2 16-1/41-13/16 1.1875 10-1/2 16-1/4
1-7/8 1.8750 10-5/8 16-1/41-15/16 1.9375 10-3/4 16-5/8
2 2.0000 10-3/4 17-1/4
• 1/2” Shank also available for drill sizes over 1/2”
Series TLCD-3 • Three Flute Series TLCD-4 • Four Flute (continued)
Series TLCD-4 • Four Flute
Size Decimal Equiv.
Flute Length
Morse Taper No.
15/64 .2344 3-3/4 6-1/81/4 .2500 3-3/4 6-1/8
17/64 .2656 3-7/8 6-1/49/32 .2812 3-7/8 6-1/45/16 .3125 4 6-3/821/64 .3281 4-1/8 6-1/211/32 .3438 4-1/8 6-1/223/64 .3594 4-1/4 6-3/43/8 .3750 4-1/4 6-3/4
Quality Imports
62Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS CORE DRILLSTaper Shank HSS
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.1/4 .2500 2-7/8 6-1/8 19/32 .2812 3 6-1/4 15/16 .3125 3-1/8 6-3/8 111/32 .3438 3-1/4 6-1/2 13/8 .3750 3-1/2 6-3/4 1
25/64 .3906 3-5/8 7 113/32 .4062 3-5/8 7 17/16 .4375 3-7/8 7-1/4 115/32 .4688 4-1/8 7-1/2 131/64 .4844 4-3/8 8-1/4 2
1/2 .5000 4-3/8 8-1/4 233/64 .5156 4-5/8 8-1/2 217/32 .5312 4-5/8 8-1/2 235/64 .5469 4-7/8 8-3/4 29/16 .5625 4-7/8 8-3/4 237/64 .5781 4-7/8 8-3/4 219/32 .5938 4-7/8 8-3/4 2
5/8 .6250 4-7/8 8-3/4 241/64 .6406 5-1/8 9 221/32 .6562 5-1/8 9 211/16 .6875 5-3/8 9-1/4 245/64 .7031 5-5/8 9-1/2 223/32 .7188 5-5/8 9-1/2 247/64 .7344 5-5/8 9-1/2 2
3/4 .7500 5-7/8 9-3/4 249/64 .7656 6 9-7/8 225/32 .7812 6 9-7/8 251/64 .7969 6-1/8 10-3/4 313/16 .8125 6-1/8 10-3/4 327/32 .8438 6-1/8 10-3/4 355/64 .8594 6-1/8 10-3/4 3
7/8 .8750 6-1/8 10-3/4 329/32 .9062 6-1/8 10-3/4 359/64 .9219 6-1/8 10-3/4 315/16 .9375 6-1/8 10-3/4 361/64 .9531 6-3/8 11 331/32 .9688 6-3/8 11 363/64 .9844 6-3/8 11 3
1 1.0000 6-3/8 11 31-1/64 1.0156 6-1/2 11-1/8 31-1/32 1.0312 6-1/2 11-1/8 31-3/64 1.0469 6-5/8 11-1/4 31-1/16 1.0625 6-5/8 11-1/4 31-5/64 1.0781 6-7/8 11-1/2 31-3/32 1.0938 6-7/8 12-1/2 41-1/8 1.1250 7-1/8 12-3/4 41-5/32 1.1562 7-1/4 12-7/8 41-3/16 1.1875 7-3/8 13 41-13/64 1.2031 7-1/2 13-1/8 41-7/32 1.2188 7-1/2 13-1/8 41-15/64 1.2344 7-7/8 13-1/2 4
Size Decimal Equiv.
Flute Length OAL Morse
Taper No.1-1/4 1.2500 7-7/8 13-1/2 4
1-17/64 1.2656 8-1/2 14-1/8 41-9/32 1.2812 8-1/2 14-1/8 41-5/16 1.3125 8-5/8 14-1/4 41-11/32 1.3438 8-3/4 14-3/8 41-3/8 1.3750 8-7/8 14-1/2 4
1-13/32 1.4062 9 14-5/8 41-7/16 1.4375 9-1/8 14-3/4 4
1-15/32 1.4688 9-1/4 14-7/8 41-1/2 1.5000 9-3/8 15 4
1-17/32 1.5312 9-3/8 16-3/8 51-35/64 1.5469 9-5/8 16-5/8 51-9/16 1.5625 9-5/8 16-5/8 5
1-37/64 1.5781 9-7/8 16-7/8 51-19/32 1.5938 9-7/8 16-7/8 51-39/64 1.6094 10 17 5
1-5/8 1.6250 10 17 51-21/32 1.6562 10-1/8 17-1/8 51-43/64 1.6719 10-1/8 17-1/8 51-11/16 1.6875 10-1/8 17-1/8 51-23/32 1.7188 10-1/8 17-1/8 51-47/64 1.7344 10-1/8 17-1/8 5
1-3/4 1.7500 10-1/8 17-1/8 51-25/32 1.7812 10-1/8 17-1/8 51-13/16 1.8125 10-1/8 17-1/8 51-27/32 1.8438 10-1/8 17-1/8 41-27/32 1.8438 10-1/8 17-1/8 5
1-7/8 1.8750 10-3/8 17-3/8 51-29/32 1.9062 10-3/8 17-3/8 51-15/16 1.9375 10-3/8 17-3/8 41-15/16 1.9375 10-3/8 17-3/8 51-31/32 1.9688 10-3/8 17-3/8 5
2 2.0000 10-3/8 17-3/8 52-1/32 2.0312 10-3/8 17-3/8 52-1/16 2.0625 10-1/4 17-3/8 52-1/8 2.1250 10-1/4 17-3/8 5
2-5/32 2.1562 10-1/4 17-3/8 52-3/16 2.1875 10-1/4 17-3/8 52-1/4 2.2500 10-1/8 17-3/8 5
2-5/16 2.3125 10-1/8 17-3/8 52-3/8 2.3750 10-1/8 17-3/8 5
2-7/16 2.4375 11-1/4 18-3/4 52-1/2 2.5000 11-1/4 18-3/4 5
2-9/16 2.5625 11-7/8 19-1/2 52-5/8 2.6250 11-7/8 19-1/2 5
2-11/16 2.6875 12-3/4 20-3/8 52-3/4 2.7500 12-3/4 20-3/8 5
2-13/16 2.8125 13-3/8 21-1/8 52-7/8 2.8750 13-3/8 21-1/8 5
2-15/16 2.9375 14 21-3/4 53 3.0000 14 21-3/4 5
• Special Sizes Also Available
Series TSCD-3 • Three Flute SeriesTSCD-4 • Four Flute Series
Quality Imports
63
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size
Morse Taper No. Morse Taper Sleeves Morse Taper Extension Sockets
Internal External OALHard Tang Only Hard & Ground
OAL Tool No.Tool No. Tool No.
1 to 1 1 1 — — — 6-1/4 ES111 to 2 1 2 3-9/16 DS12 DSH12 6-1/4 ES121 to 3 1 3 3-15/16 DS13 DSH13 6-7/8 ES131 to 4 1 4 4-7/8 DS14 DSH14 7-1/2 ES141 to 5 1 5 6-1/8 DS15 DSH15 9-1/16 ES152 to 1 2 1 — — — 6-1/4 ES212 to 2 2 2 — — — 6-7/8 ES222 to 3 2 3 4-7/16 DS23 DSH23 7-5/8 ES232 to 4 2 4 4-7/8 DS24 DSH24 8-1/2 ES242 to 5 2 5 6-1/8 DS25 DSH25 9-3/4 ES253 to 1 3 1 — — — 7-1/4 ES313 to 2 3 2 — — — 7-3/4 ES323 to 3 3 3 — — — 8-1/2 ES333 to 4 3 4 5-3/8 DS34 DSH34 9-1/2 ES343 to 5 3 5 6-1/8 DS35 DSH35 10-1/2 ES354 to 2 4 2 — — — 8-1/2 ES424 to 3 4 3 — — — 9-1/2 ES434 to 4 4 4 — — — 10-1/2 ES444 to 5 4 5 6-5/8 DS45 DSH45 11-7/8 ES454 to 6 4 6 8-5/8 DS46 DSH46 14 ES465 to 3 5 3 — — — 10-1/2 ES535 to 4 5 4 — — — 11-3/8 ES545 to 5 5 5 — — — 13-3/4 ES555 to 6 5 6 8-5/8 DS56 DSH56 15-3/8 ES56
Size Fits Morse # Length Tool #
1 #1 4-1/2 DD-12 #2 5-1/4 DD-23 #3 6 DD-34 #4, #5, #6 7 DD-4
Set (1,2,3 & 4) #1 thru #6 same as above DD-523/64 .3594 4-1/4 6-3/4
MACHINE TOOL ACCESSORIES
• Morse Taper Sleeves and Extension Sockets
Series ES • Extension SocketsSeries DS • Sleeves
Series DD • Drill Drifts
Quality Imports
64Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Approx. Overall Length
Approx. Usable Length
5/32 6-5/8 43/16 4-5/8 23/16 6-5/8 43/16 8-5/8 67/32 6-5/8 41/4 4-5/8 21/4 6-5/8 41/4 8-5/8 61/4 12 91/4 14-5/8 125/16 4 25/16 6-5/8 45/16 8 65/16 12-5/8 103/8 6-5/8 43/8 8 63/8 12-5/8 107/16 6-5/8 47/16 12-5/8 107/16 18-5/8 161/2 6-5/8 41/2 8 61/2 12-5/8 101/2 18-5/8 141/2 24 229/16 6-3/4 49/16 12-3/4 109/16 18-3/4 165/8 6-3/4 45/8 8 65/8 12-3/4 105/8 18-3/4 165/8 24 22
11/16 6-3/4 43/4 6-3/4 43/4 8-5/8 63/4 12-3/4 103/4 16 143/4 18-3/4 167/8 6-3/4 47/8 10 87/8 12-3/4 107/8 18-3/4 141 13-3/4 101 18-3/4 14
1-1/8 1.1250 7-1/81-5/32 1.1562 7-1/41-3/16 1.1875 7-3/81-13/64 1.2031 7-1/21-7/32 1.2188 7-1/21-15/64 1.2344 7-7/8
Size Approx. Overall Length
Approx. Usable Length
1/2 13 71/2 21 155/8 13 75/8 21 155/8 36 303/4 13 73/4 21 153/4 36 307/8 13 71 13 71 21 151 36 30
1-1/8 17 111-1/8 23 171-1/4 23 171-1/4 36 301-3/8 23 171-1/2 23 17
HAMMER DRILLSCarbide TippedSDS-Plus / SDS Max / Adapters
Series SDSM • SDS max Masonry Drills4 Slot Shank
Series SDS4350 • SDS-Plus Masonry Drills4 Slot Shank
AdaptersCall For Pricing And Availability
RE-PM SDS MAX
RE-SDS SDS PLUG
RE-PL ½ STRAIGHT SHANK
65
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Shank Size
1/8 1/85/32 5/32
11/64 11/643/16 3/167/32 7/321/4 1/49/32 1/45/16 1/43/8 1/47/16 1/41/2 1/4
Size Shank Size
1/8 1/83/16 3/161/4 1/49/32 1/45/16 1/43/8 1/47/16 1/47/16 3/81/2 1/41/2 3/89/16 3/89/16 1/25/8 1/2
11/16 1/23/4 1/27/8 1/21 1/2
1-1/8 1/21-1/4 1/21-3/8 1/21-1/2 1/2
Size Shank Size
1/8 1/83/16 3/161/4 1/45/16 1/43/8 1/47/16 3/81/2 1/41/2 3/89/16 1/25/8 1/2
11/16 1/23/4 1/27/8 1/21 1/2
1-1/8 1/21-3/8 1/2
1 1/21-1/8 1/21-1/4 1/21-3/8 1/21-1/2 1/2
Size Shank Size
1/4 1/43/16 3/165/16 1/43/8 5/167/16 3/81/2 3/89/16 1/25/8 1/25/8 3/8
11/16 1/23/4 1/27/8 1/21 1/2
1-1/8 1/21-1/4 1/21-3/8 1/21-1/2 1/21-1/8 1/21-1/4 1/21-3/8 1/21-1/2 1/2
CARBIDE TIPPED MASONRY DRILLSStraight ShankRegular Helix Type
Series VM440018” Overall Length
Series VM440012” Overall Length
Series VM43506” Overall Length
Series VM43503” or 4” Overall Length
66Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LSCORE BITS
• NOW Available! Wet Core Bits• Available from 1” to 8”• All bits are designed to drill through the toughest reinforced concrete
Series CDW • Wet Core Bits
NEW ITEM
Part Number Description
CDW-10000-5/8-11 1 Core Drill Wet 5/8-11CDW-10000-1-1/4-7 1 Core Drill Wet 1-1/4-7CDW-11250-5/8-11 1 1/8 Core Drill Wet 5/8-1CDW-12500-5/8-11 1 1/4 Core Drill Wet 5/8-1CDW-12500-1-1/4-7 1 1/4 Core Drill Wet 1-1/4-7CDW-15000-5/8-11 1 1/2 Core Drill Wet 5/8-11CDW-15000-1-1/4-7 1 1/2 Core Drill Wet 1-1/4-7CDW-17500-1-1/4-7 1 3/4 Core Drill Wet 1-1/4-7CDW-20000-1-1/4-7 2 Core Drill Wet 1-1/4-7CDW-22500-1-1/4-7 2 1/4 Core Drill Wet 1-1/4-7CDW-25000-1-1/4-7 2 1/2 Core Drill Wet 1-1/4-7CDW-27500-1-1/4-7 2 3/4 Core Drill Wet 1-1/4-7CDW-30000-1-1/4-7 3 Core Drill Wet 1-1/4-7CDW-32500-1-1/4-7 3 1/4 Core Drill Wet 1-1/4-7CDW-35000-1-1/4-7 3 1/2 Core Drill Wet 1-1/4-7CDW-40000-1-1/4-7 4 Core Drill Wet 1-1/4-7CDW-42500-1-1/4-7 4 1/4Core Drill Wet 1-1/4-7CDW-45000-1-1/4-7 4 1/2 Core Drill Wet 1-1/4CDW-50000-1-1/4-7 5 Core Drill Wet 1-1/4-7CDW-55000-1-1/4-7 5 1/2 Core Drill Wet 1-1/4-7CDW-60000-1-1/4-7 6 Core Drill Wet 1-1/4-7CDW-62500-1-1/4-7 6 1/4 Core Drill Wet 1-1/4-7CDW-65000-1-1/4-7 6 1/2 Core Drill Wet 1-14-7CDW-70000-1-1/4-7 7 Core Drill Wet 1-1/4-7CDW-80000-1-1/4-7 8 Core Drill Wet 1-1/4-7
CDE-6-5/8-11 6 Extension 5/8-11CDE-6-1-1/4-7 6 Extension 1-1/4-7CDE-12-5/8-11 12 Extension 5/8-11CDE-12-1-1/4-7 12 Extension 1-1/4-7
CD-ADAPTOR 5/8-11 Female to 1-1/4-7 Male AdaptorCD-ADAPTOR 1-1/4-7 Female to 5/8-11 Male Adaptor
CD-ADAPTOR THREAD 5/8-11 Male Thread to 1/2 Shank Adaptor
67
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Decimal Equiv.
Flute Length OAL
1/8 .1250 1-5/8 2-3/49/64 .1406 1-3/4 2-7/85/32 .1562 2 3-1/811/64 .1719 2-1/8 3-1/43/16 .1875 2-5/16 3-1/213/64 .2031 2-7/16 3-5/87/32 .2188 2-1/2 3-3/415/64 .2344 2-5/8 3-7/81/4 .2500 2-3/4 4
17/64 .2656 2-7/8 4-1/89/32 .2812 2-15/16 4-1/419/64 .2969 3-1/16 4-3/85/16 .3125 3-3/16 4-1/221/64 .3281 3-5/16 4-5/811/32 .3438 3-7/16 4-3/423/64 .3594 3-1/2 4-7/83/8 .3750 3-5/8 5
25/64 .3906 3-3/4 5-1/813/32 .4062 3-7/8 5-1/427/64 .4219 3-15/16 5-3/87/16 .4375 4-1/16 5-1/229/64 .4531 4-3/16 5-5/815/32 .4688 4-5/16 5-3/431/64 .4844 4-3/8 5-7/81/2 .5000 4-1/2 6
33/64 .5156 4-13/16 6-5/817/32 .5312 4-13/16 6-5/835/64 .5469 4-13/16 6-5/89/16 .5625 4-13/16 6-5/837/64 .5781 4-13/16 6-5/819/32 .5938 5-3/16 7-1/839/64 .6094 5-3/16 7-1/85/8 .6250 5-3/16 7-1/8
41/64 .6406 5-3/16 7-1/821/32 .6562 5-3/16 7-1/843/64 .6719 5-5/8 7-5/811/16 .6875 5-5/8 7-5/8
Size Decimal Equiv.
Flute Length OAL
A .2340 2-5/8 3-7/8B .2380 2-3/4 4C .2420 2-3/4 4D .2460 2-3/4 4E .2500 2-3/4 4F .2570 2-7/8 4-1/8G .2610 2-7/8 4-1/8H .2660 2-7/8 4-1/8I .2720 2-7/8 4-1/8J .2770 2-7/8 4-1/8K .2810 2-15/16 4-1/4L .2900 2-15/16 4-1/4M .2950 3-1/16 4-3/8N .3020 3-1/16 4-3/8O .3160 3-3/16 4-1/2P .3230 3-5/16 4-5/8Q .3320 3-7/16 4-3/4R .3390 3-7/16 4-3/4S .3480 3-1/2 4-7/8T .3580 3-1/2 4-7/8U .3680 3-5/8 5V .3770 3-5/8 5W .3860 3-3/4 5-1/8X .3970 3-3/4 5-1/8Y .4040 3-7/8 5-1/4Z .4130 3-7/8 5-1/4
Size Decimal Equiv.
Flute Length OAL
1 .2280 2-5/8 3-7/82 .2210 2-5/8 3-7/83 .2130 2-1/2 3-3/44 .2090 2-1/2 3-3/45 .2055 2-1/2 3-3/46 .2040 2-1/2 3-3/47 .2010 2-7/16 3-5/88 .1990 2-7/16 3-5/89 .1960 2-7/16 3-5/810 .1935 2-7/16 3-5/811 .1910 2-5/16 3-1/212 .1890 2-5/16 3-1/213 .1850 2-5/16 3-1/214 .1820 2-3/16 3-3/815 .1800 2-3/16 3-3/816 .1770 2-3/16 3-3/817 .1730 2-3/16 3-3/818 .1695 2-1/8 3-1/419 .1660 2-1/8 3-1/420 .1610 2-1/8 3-1/421 .1590 2-1/8 3-1/422 .1570 2 3-1/823 .1540 2 3-1/824 .1520 2 3-1/825 .1495 1-7/8 326 .1470 1-7/8 327 .1440 1-7/8 328 .1405 1-3/4 2-7/829 .1360 1-3/4 2-7/830 .1285 1-5/8 2-3/431 .1200 1-5/8 2-3/432 .1160 1-5/8 2-3/4
CARBIDE TIPPED DRILLSJobber Length 118º Point
Series CT150Fractional Sizes
Series CT150Wire Gauge Sizes
Series CT150Letter Sizes
68Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Flute Length OAL
3/32 2-5/8 5-1/81/8 2-3/4 5-1/89/64 3 5-3/85/32 3 5-3/811/64 3-3/8 5-3/43/16 3-3/8 5-3/45.00 3-1/2 6-1/4
13/64 3-5/8 67/32 3-5/8 615/64 3-3/4 6-1/8
C 3-3/4 6-1/86.30 3-3/4 6-1/81/4 3-3/4 6-1/8F 3-7/8 6-1/4
17/64 3-7/8 6-1/49/32 3-7/8 6-1/4
19/64 4 6-3/85/16 4 6-3/8
O 3-1/2 6-1/421/64 4-1/8 6-1/211/32 4-1/8 6-1/223/64 4-1/4 6-3/49.40 4 6-3/43/8 4-1/4 6-3/4
25/64 4-3/8 713/32 4-3/8 727/64 4-5/8 7-1/47/16 4-5/8 7-1/4
29/64 4-3/4 7-1/215/32 4-3/4 7-1/212.00 5-1/2 7-1/431/64 4-3/4 7-3/41/2 4-3/4 7-3/4
Size Flute Length OAL Morse
Taper No.
1/4 2-7/8 6-1/8 117/64 3 6-1/4 19/32 3 6-1/4 1
19/64 3-1/8 6-3/8 15/16 3-1/8 6-3/8 1
21/64 3-1/4 6-1/2 111/32 3-1/4 6-1/2 123/64 3-1/2 6-3/4 13/8 3-1/2 6-3/4 1
25/64 3-5/8 7 113/32 3-5/8 7 127/64 3-7/8 7-1/4 17/16 3-7/8 7-1/4 1
29/64 4-1/8 7-1/2 115/32 4-1/8 7-1/2 131/64 4-3/8 8-1/4 21/2 4-3/8 8-1/4 2
33/64 4-5/8 8-1/2 217/32 4-5/8 8-1/2 235/64 4-7/8 8-3/4 29/16 4-7/8 8-3/4 2
37/64 4-7/8 8-3/4 219/32 4-7/8 8-3/4 239/64 4-7/8 8-3/4 25/8 4-7/8 8-3/4 2
41/64 5-1/8 9 221/32 5-1/8 9 243/64 5-3/8 9-1/4 211/16 5-3/8 9-1/4 245/64 5-5/8 9-1/2 223/32 5-5/8 9-1/2 247/64 5-7/8 9-3/4 23/4 5-7/8 9-3/4 2
49/64 6 9-7/8 225/32 6-1/8 9-7/8 251/64 6-1/8 10-3/4 313/16 6-1/8 10-3/4 353/64 6-1/8 10-3/4 327/32 6-1/8 10-3/4 355/64 6-1/8 10-3/4 37/8 6-1/8 10-3/4 3
57/64 6-1/8 10-3/4 329/32 6-1/8 10-3/4 359/64 6-1/8 10-3/4 315/16 6-1/8 10-3/4 361/64 6-3/8 11 331/32 6-3/8 11 363/64 6-3/8 11 3
1 6-3/8 11 31-1/32 6-1/2 11-1/8 31-1/16 6-5/8 11-1/4 41-3/32 6-7/8 12-1/2 41-1/8 7-1/8 12-3/4 4
1-5/32 7-1/4 12-7/8 41-3/16 7-3/8 13 41-7/32 7-1/2 13-1/8 41-1/4 7-7/8 13-1/2 4
Size Flute Length OAL
33/64 4-3/4 817/32 4-3/4 835/64 4-7/8 8-1/49/16 4-7/8 8-1/437/64 4-7/8 8-1/419/32 4-7/8 8-3/439/64 4-7/8 8-3/45/8 4-7/8 8-3/4
41/64 5-1/8 8-3/421/32 5-1/8 943/64 5-3/8 911/16 5-3/8 9-1/445/64 5-5/8 9-1/423/32 5-5/8 9-1/247/64 5-7/8 9-1/23/4 5-7/8 9-3/4
49/64 6 9-3/425/32 6 9-7/851/64 6-1/8 9-7/813/16 6-1/8 1053/64 6-1/8 1027/32 6-1/8 1055/64 6-1/8 107/8 6-1/8 10
57/64 6-1/8 1029/32 6-1/8 1059/64 6-1/8 10-3/415/16 6-1/8 10-3/461/64 6-3/8 1131/32 6-3/8 1163/64 6-3/8 11
1 6-3/8 11
Series CTD350 - Taper Shank
Series CT250 - Taper Length
CARBIDE TIPPED DRILLS118º Point
69
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Flute Length OAL
1/16* — 1-1/25/64* — 1-1/23/32* — 27/64* — 21/8* — 29/64* — 25/32* — 211/64 1-1/2 3-1/23/16 1-1/2 3-1/2
13/64 1-3/4 3-3/47/32 1-3/4 3-3/4
15/64 2 41/4 2 4
17/64 2-1/4 4-1/49/32 2-1/4 4-1/4
19/64 2-1/2 4-1/25/16 2-1/2 4-1/2
21/64 2-3/4 4-3/411/32 2-3/4 4-3/423/64 3 53/8 3 5
25/64 3 5-1/413/32 3 5-1/427/64 3 5-1/27/16 3 5-1/229/64 3-1/4 5-3/415/32 3-1/4 5-3/431/64 3-1/2 6
1/2 3-1/2 617/32 3-1/2 69/16 3-1/2 619/32 4 75/8 4 7
21/32 4-1/2 7-1/211/16 4-1/2 7-1/223/32 4-3/4 8
3/4 4-3/4 813/16 4-3/4 8
7/8 4-3/4 815/16 4-3/4 8
1 4-3/4 8
Size Flute Length OAL
1/8 7/8 1-7/89/64 15/16 1-15/165/32 1 2-1/163/16 1-1/8 2-3/167/32 1-1/4 2-3/81/4 1-3/8 2-1/2
9/32 1-1/2 2-11/165/16 1-5/8 2-13/163/8 1-13/16 3-1/8
7/16 2-1/16 3-7/161/2 2-1/4 3-3/4
CARBIDE TIPPED DRILLSDie Drills / Screw Machine Drills
Series CT400Screw Machine Drills
Series CTD450Die Drills
70Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL
1/64 .0156 1/4 1-1/41/32 .0312 5/16 1-1/43/64 .0469 3/4 1-1/21/16 .0625 3/4 1-1/25/64 .0781 7/8 1-3/43/32 .0938 1 27/64 .1094 1-1/4 2-1/41/8 .1250 1-1/4 2-1/49/64 .1406 1-3/8 2-1/25/32 .1562 1-3/8 2-1/211/64 .1719 1-5/8 2-3/43/16 .1875 1-5/8 2-3/413/64 .2031 1-3/4 37/32 .2188 1-3/4 315/64 .2344 2 3-1/41/4 .2500 2 3-1/4
17/64 .2656 2-1/8 3-1/29/32 .2812 2-1/8 3-1/2
SOLID CARBIDE DRILLSStandard Length
Size Decimal Equiv.
Flute Length OAL
19/64 .2969 2-3/8 3-3/45/16 .3125 2-3/8 3-3/421/64 .3281 2-1/2 411/32 .3438 2-1/2 423/64 .3594 2-3/4 4-1/43/8 .3750 2-3/4 4-1/4
25/64 .3906 2-7/8 4-1/213/32 .4062 2-7/8 4-1/227/64 .4219 2-7/8 4-1/27/16 .4375 2-7/8 4-1/229/64 .4531 3 4-3/415/32 .4688 3 4-3/431/64 .4844 3 4-3/41/2 .5000 3 4-3/4
17/32 .5312 4 69/16 .5625 4 65/8 .6250 4 63/4 .7500 4 6
Size Decimal Equiv.
Flute Length OAL
A .2340 2 3-1/4B .2380 2 3-1/4C .2420 2 3-1/4D .2460 2 3-1/4E .2500 2 3-1/4F .2570 2 3-1/4G .2610 2-1/8 3-1/2H .2660 2-1/8 3-1/2I .2720 2-1/8 3-1/2J .2770 2-1/8 3-1/2K .2810 2-1/8 3-1/2L .2900 2-1/8 3-1/2M .2950 2-3/8 3-3/4
Size Decimal Equiv.
Flute Length OAL
N .3020 2-3/8 3-3/4O .3160 2-3/8 3-3/4P .3230 2-3/8 3-3/4Q .3320 2-1/2 4R .3390 2-1/2 4S .3480 2-1/2 4T .3580 2-3/4 4-1/4U .3680 2-3/4 4-1/4V .3770 2-3/4 4-1/4W .3860 2-7/8 4-1/2X .3970 2-7/8 4-1/2Y .4040 2-7/8 4-1/2Z .4130 2-7/8 4-1/2
Series SCD102 • Letter Sizes
Series SCD100 • Fractional Sizes
71
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SOLID CARBIDE DRILLSStandard Length
Size Decimal Equiv. Flute Length OAL
1 .2280 1-3/4 32 .2210 1-3/4 33 .2130 1-3/4 34 .2090 1-3/4 35 .2055 1-3/4 36 .2040 1-3/4 37 .2010 1-3/4 38 .1990 1-3/4 39 .1960 1-3/4 3
10 .1935 1-5/8 2-3/411 .1910 1-5/8 2-3/412 .1890 1-5/8 2-3/413 .1850 1-5/8 2-3/414 .1820 1-5/8 2-3/415 .1800 1-5/8 2-3/416 .1770 1-5/8 2-3/417 .1730 1-5/8 2-3/418 .1695 1-5/8 2-3/419 .1660 1-5/8 2-3/420 .1610 1-3/8 2-1/221 .1590 1-3/8 2-1/222 .1570 1-3/8 2-1/223 .1540 1-3/8 2-1/224 .1520 1-3/8 2-1/225 .1495 1-3/8 2-1/226 .1470 1-3/8 2-1/227 .1440 1-3/8 2-1/228 .1405 1-3/8 2-1/229 .1360 1-3/8 2-1/230 .1285 1-1/4 2-1/431 .1200 1-1/4 2-1/432 .1160 1-1/4 2-1/433 .1130 1-1/4 2-1/434 .1110 1-1/4 2-1/435 .1100 1-1/4 2-1/436 .1065 1-1/4 2-1/437 .1040 1-1/4 2-1/438 .1015 1-1/4 2-1/439 .0995 1-1/4 2-1/440 .0980 1 2
Size Decimal Equiv.
Flute Length OAL
41 .0960 1 242 .0935 1 243 .0890 1 244 .0860 1 245 .0820 7/8 1-3/446 .0810 7/8 1-3/447 .0785 7/8 1-3/448 .0760 7/8 1-3/449 .0730 7/8 1-3/450 .0700 7/8 1-3/451 .0670 3/4 1-1/252 .0635 3/4 1-1/253 .0595 3/4 1-1/254 .0550 3/4 1-1/255 .0520 3/4 1-1/256 .0465 3/4 1-1/257 .0430 3/4 1-1/258 .0420 3/4 1-1/259 .0410 3/4 1-1/260 .0400 3/4 1-1/261 .0390 5/8 1-1/262 .0380 5/8 1-1/263 .0370 5/8 1-1/264 .0360 5/8 1-1/265 .0350 5/8 1-1/266 .0330 5/16 1-1/467 .0320 5/16 1-1/468 .0310 5/16 1-1/469 .0292 5/16 1-1/470 .0280 5/16 1-1/471 .0260 5/16 1-1/472 .0250 5/16 1-1/473 .0240 1/4 1-1/474 .0225 1/4 1-1/475 .0210 1/4 1-1/476 .0200 1/4 1-1/477 .0180 1/4 1-1/478 .0160 1/4 1-1/479 .0145 1/4 1-1/480 .0135 1/4 1-1/4
Series SCD104 • Wire Gauge Sizes
72Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL
1/32 .0312 3/8 1-1/83/64 .0469 1/2 1-1/21/16 .0625 5/8 1-5/85/64 .0781 11/16 1-11/163/32 .0938 3/4 1-3/47/64 .1094 13/16 1-13/161/8 .1250 7/8 1-7/89/64 .1406 15/16 1-15/165/32 .1562 1 2-1/1611/64 .1719 1-1/16 2-1/83/16 .1875 1-1/8 2-3/16
13/64 .2031 1-3/16 2-1/47/32 .2188 1-1/4 2-3/815/64 .2344 1-5/16 2-7/161/4 .2500 1-3/8 2-1/2
17/64 .2656 1-7/16 2-5/89/32 .2812 1-1/2 2-11/16
19/64 .2969 1-9/16 2-3/45/16 .3125 1-5/8 2-13/16
21/64 .3281 1-11/16 2-15/1611/32 .3438 1-11/16 323/64 .3594 1-3/4 3-1/163/8 .3750 1-13/16 3-1/8
25/64 .3906 1-7/8 3-1/413/32 .4062 1-15/16 3-5/1627/64 .4219 2 3-3/87/16 .4375 2-1/16 3-7/16
29/64 .4531 2-1/8 3-9/1615/32 .4688 2-1/8 3-5/831/64 .4844 2-3/16 3-11/16
1/2 .5000 2-1/4 3-3/4
SOLID CARBIDE DRILLSScrew Machine Length
Series SC600 • Screw Machine Length
73
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
• Fits all standard centersUsed for centering work ends, where the workpiece is to be revolved on machine centers.
Size Body Diameter
Drill Dia. and Length
OAL PkgQty
000 1/8 .020 1-1/4 1200 1/8 .025 1-1/4 120 1/8 1/32 1-1/4 121 1/8 3/64 1-1/4 122 3/16 5/64 1-7/8 123 1/4 7/64 2 124 5/16 1/8 2-1/8 12
4-1/2 3/8 9/64 2-1/2 65 7/16 3/16 2-3/4 66 1/2 7/32 3 67 5/8 1/4 3-1/4 18 3/4 5/16 3-1/2 19 7/8 11/32 3-5/8 1
10 1 3/8 3-3/4 1
Size Body Diameter
Drill Dia. and Length OAL
1 1/8 3/64 31 1/8 3/64 41 1/8 3/64 51 1/8 3/64 62 3/16 5/64 42 3/16 5/64 52 3/16 5/64 63 1/4 7/64 43 1/4 7/64 53 1/4 7/64 64 5/16 1/8 44 5/16 1/8 54 5/16 1/8 6
4-1/2 3/8 9/64 44-1/2 3/8 9/64 54-1/2 3/8 9/64 6
5 7/16 3/16 45 7/16 3/16 55 7/16 3/16 66 1/2 7/32 56 1/2 7/32 67 5/8 1/4 68 3/4 5/16 6
COMBINED DRILLS/COUNTERSINKS60o Countersink Angle
Series CDC-L • LongSeries CDC • Plain type
Quality Imports
74Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Size Decimal Equiv.
Flute Length OAL
1/8 .1250 1/2 1-7/83/16 .1875 9/16 2-3/161/4 .2500 3/4 2-1/23/8 .3750 1-1/8 3-1/81/2 .5000 1-3/8 3-3/45/8 .6250 1-5/8 4-3/83/4 .7500 1-7/8 51 1.0000 2-1/4 6
Size Decimal Equiv.
7/64 .10941/8 .1250#30 .12859/64 .14065/32 .15623/16 .18757/32 .21881/4 .2500
Size Range Step Increments
No. of Hole Sizes
Shank Size
HSS Tool No.
Tin Coated ToolNo.
1/8-1/2 32nd 13 1/4 #1 #1TI3/16-1/2 16th 6 1/4 #2 #2TI1/4-3/4 16th 9 3/8 #3 #3TI3/16-7/8 16th 12 3/8 #4 #4TI1/4-1-3/8 16th 10 7/16 #5 #5TI
9/16-1 16th 8 7/16 #20 #20TI13/16-1-3/8 16th 10 7/16 #21 #21TI
DRILLSSpotting Drills / Body Drills / Step Drills
• NC/CNC Spotting Drills
• Self-Starting Step DrillsSingle-Fluted Cutting Edge3-Flatted Shank Prevents Slipping in Drill Chucks
Series SCD • HSS, 90º Point
• Body Drills
Series T460 • Double End HSS135º Split Point
Series TKX50
Quality Imports
75
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Shank Dia. OAL
1/8 1/8 1-1/43/16 3/16 1-1/21/4 1/4 1-1/25/16 1/4 1-5/83/8 1/4 1-3/41/2 1/4 25/8 3/8 2-1/43/4 1/2 2-5/87/8 1/2 2-3/41 1/2 2-3/4
1-1/4 1/2 2-3/41-1/2 3/4 2-7/81-3/4 3/4 3
2 3/4 3-1/4
Size Shank Dia. OAL
1/4 3/16 1-1/23/8 1/4 1-3/41/2 3/8 25/8 3/8 2-1/43/4 1/2 2-5/81 1/2 2-3/4
1-1/4 1/2 31-1/2 3/4 3
2 3/4 3-1/4
Series MCS Shank Dia. OAL
1/4 3/16 1-1/23/8 1/4 1-3/41/2 3/8 25/8 3/8 2-1/43/4 1/2 2-5/81 1/2 2-3/4
1-1/4 1/2 31-1/2 3/4 3
Size Shank Dia. OAL
1/4 1/4 25/16 1/4 23/8 1/4 21/2 1/4 25/8 1/2 2-3/43/4 1/2 2-3/47/8 1/2 2-3/41 1/2 2-3/4
1-1/4 3/4 3-3/81-1/2 3/4 3-1/21-3/4 1 4-1/4
2 1 4-3/8
COUNTERSINKS
• Single-Flute CountersinkHigh Speed Steel60º, 82º, 90º, 100º
• Three-Flute CountersinkHigh Speed Steel60º, 82º, 90º, 100º
• Four-Flute Machine CountersinkHigh Speed Steel60º, 82º, 90º
Series CRSeries MCS
• Six-Flute Chatterless CountersinksHigh Speed Steel60º, 82º, 90º
Series CS-6 • Single ToolsSeries MCS
Quality Imports
76Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LS
Counterbore Size Pilot Hole Size Range of Pilot Sizes No of Flutes OAL Shank Dia. Morse Taper No.
Smallest Dia. To Largest Dia.3/16 3/32 1/8 5/32 3 3-1/2 15/64 —7/32 3/32 1/8 3/16 3 3-5/8 15/64 —15/64 3/32 1/8 3/16 3 3-5/8 15/64 —
1/4 3/32 1/8 3/16 3 3-13/16 15/64 117/64 3/32 1/8 3/16 3 3-13/16 17/64 —9/32 3/32 1/8 7/32 3 3-13/16 17/64 119/64 3/32 1/8 7/32 3 3-13/16 17/64 —5/16 3/32 1/8 1/4 3 3-13/16 19/64 111/32 3/32 1/8 9/32 3 3-13/16 5/16 13/8 5/32 3/16 5/16 3 4-1/16 5/16 1
25/64 5/32 3/16 5/16 3 4-1/16 3/8 —13/32 5/32 3/16 11/32 3 4-1/16 3/8 17/16 5/32 3/16 3/8 3 4-1/16 3/8 115/32 3/16 1/4 13/32 3 4-5/16 7/16 131/64 3/16 1/4 7/16 3 4-5/16 7/16 —
1/2 3/16 1/4 7/16 3 4-5/16 7/16 117/32 3/16 1/4 15/32 3 4-5/16 1/2 19/16 3/16 1/4 1/2 3 4-5/16 1/2 137/64 3/16 1/4 1/2 3 5-1/8 1/2 —19/32 3/16 1/4 17/32 3 5-1/8 1/2 2
5/8 3/16 1/4 9/16 3 5-1/8 1/2 241/64 3/16 1/4 9/16 3 5-1/8 1/2 —21/32 3/16 1/4 19/32 3 5-1/8 1/2 211/16 3/16 1/4 5/8 3 5-1/8 1/2 223/32 1/4 5/16 21/32 3 5-3/8 1/2 2
3/4 1/4 5/16 11/16 3 5-3/8 1/2 225/32 1/4 5/16 23/32 3 5-3/8 5/8 213/16 1/4 5/16 3/4 3 5-3/8 5/8 227/32 1/4 5/16 25/32 3 5-3/8 3/4 2
7/8 1/4 5/16 13/16 3 5-3/8 3/4 229/32 1/4 5/16 27/32 3 6-1/8 3/4 315/16 1/4 5/16 7/8 3 6-1/8 3/4 331/32 5/16 3/8 15/16 3 6-3/8 3/4 3
1 5/16 3/8 15/16 3 6-3/8 3/4 31-1/16 5/16 3/8 1 3 6-3/8 3/4 31-1/8 5/16 3/8 1-1/16 3 6-3/8 1 3
1-3/16 5/16 3/8 1-1/8 3 6-3/8 1 31-1/4 3/8 7/16 1-3/16 5 6-5/8 1 3
1-5/16 3/8 7/16 1-1/4 5 6-5/8 1 31-3/8 3/8 7/16 1-5/16 5 6-5/8 1 3
1-7/16 3/8 7/16 1-3/8 5 7-7/8 1-1/4 41-1/2 3/8 7/16 1-7/16 5 7-7/8 1-1/4 41-5/8 7/16 1/2 1-9/16 5 8-1/8 1-1/4 4
1-11/16 7/16 1/2 1-5/8 5 8-1/8 1-1/4 41-3/4 7/16 1/2 1-11/16 5 8-1/8 1-1/4 4
1-13/16 7/16 1/2 1-3/4 5 8-1/8 1-1/2 41-7/8 7/16 1/2 1-13/16 5 8-1/8 1-1/2 4
2 1/2 9/16 1-15/16 5 8-3/8 1-1/2 42-1/8 1/2 9/16 2-1/16 5 9-7/8 1-1/2 52-1/4 1/2 9/16 2-3/16 5 9-7/8 1-1/2 52-3/8 1/2 9/16 2-5/16 5 9-7/8 1-1/2 52-1/2 1/2 9/16 2-7/16 5 9-7/8 1-1/2 52-5/8 1/2 9/16 2-9/16 5 9-7/8 1-3/4 52-3/4 1/2 9/16 2-11/16 5 9-7/8 1-3/4 52-7/8 1/2 9/16 2-13/16 5 9-7/8 1-3/4 5
3 1/2 9/16 2-15/16 5 9-7/8 1-3/4 5
COUNTERBORES AND PILOTSInterchangeable Pilot Counterbores
Series 375 • Straight ShankSeries 376 • Taper Shank Quality Imports
77
DRILLS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Pilot Dia.
Shank Diameter
3/32 1/8 5/321/8 a a Spec Order
9/64 a Spec Order Spec Order
5/32 a a a3/16 a a a7/32 a a a1/4 a a aF a Spec Order Spec Order
9/32 a a a5/16 a a a11/32 a a a3/8 Spec Order a a
13/32 Spec Order a a7/16 Spec Order a a15/32 Spec Order a a
1/2 Spec Order a Spec Order
9/16 Spec Order a Spec Order
Pilot Dia.
Shank Diameter
3/16 1/4 5/167/32 a Spec Order Spec Order
1/4 a Spec Order Spec Order
F a Spec Order Spec Order
9/32 a Spec Order Spec Order
5/16 a a Spec Order
11/32 a a a3/8 a a a
13/32 a a a7/16 a a a15/32 a a a
1/2 a a a17/32 a a a9/16 a a a19/32 a a a
5/8 a a a21/32 a a a11/16 a a a23/32 Spec Order a a3/4 a a a
25/32 a a a13/16 Spec Order a a27/32 Spec Order a a
7/8 a a a29/32 Spec Order a a15/16 a Spec Order a31/32 Spec Order Spec Order a
1 a Spec Order a1-1/16 Spec Order Spec Order a1-1/8 Spec Order Spec Order a1-3/16 Spec Order Spec Order a
Pilot Dia.
Shank Diameter
3/8 7/16 1/213/32 a Spec Order Spec Order
7/16 a Spec Order Spec Order
15/32 a Spec Order Spec Order
1/2 a Spec Order Spec Order
17/32 a a Spec Order
9/16 a a a19/32 a a a5/8 a a a
21/32 a a a11/16 a a a23/32 a a a3/4 a a a
25/32 a a Spec Order
13/16 a a a27/32 a a a7/8 a a a
29/32 a Spec Order Spec Order
15/16 a a a31/32 a Spec Order Spec Order
1 a a a1-1/16 a a a1-1/8 a a a1-3/16 a a a1-1/4 a a a1-5/16 a a a1-3/8 a a a1-7/16 a a a1-1/2 Spec Order a a
1-9/16 Spec Order a a1-5/8 Spec Order a a
1-11/16 Spec Order a a1-3/4 Spec Order a a
1-13/16 Spec Order a a1-7/8 Spec Order a a
1-15/16 Spec Order Spec Order a2 Spec Order Spec Order a
COUNTERBORES AND PILOTSPilots for Interchangeable Pilot Counterbores
Series 373 • Pilots
• Import Quality Imports
78Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LSEN
D M
ILLS
HSS Double End End Mills - 2 Flute, 4 Flute ........................................................ 79HSS Single End End Mills for Aluminum - Regular - Long - Extra Long Lengths ..80HSS Multi Flute End Mills Regular Length ........................................................... 81 HSS Multi Flute End Mills Long Length - Ball End ............................................... 82 Solid Carbide Single End Mills - 2 Flute, 4 Flute Square End Ball End ................ 83Solid Carbide Double End Mills - 2 Flute, 4 Flute Square End Ball End ............... 84
TABL
E OF
CON
TENT
S
79Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRILLSEND M
ILLSPREMIUM CUTTING TOOLSDouble-End End Mills
Series EM20D2 Flute Double-End End Mills
• High Speed Steel• Center Cutting
Part No. Mill Diameter
Shank Diameter
Flute Length OAL
C-4 1/8 3/8 3/8 3-1/16C-5 4/32 3/8 7/16 3-1/8C-6 3/16 3/8 7/16 3-1/8C-7 7/32 3/8 1/2 3-1/8C-8 1/4 3/8 1/2 3-1/8C-9 9/32 3/8 9/16 3-1/8C-10 5/16 3/8 9/16 3-1/8C-11 11/32 3/8 9/16 3-1/8C-12 3/8 3/8 9/16 3-1/8C-13 13/32 1/2 13/16 3-3/4C-14 7/16 1/2 13/16 3-3/4C-15 15/32 1/2 13/16 3-3/4C-16 1/2 1/2 13/16 3-3/4C-18 9/16 5/8 1-1/8 4-1/2C-20 5/8 5/8 1-1/8 4-1/2C-22 11/16 3/4 1-5/16 5C-24 3/4 3/4 3/8 5C-26 13/16 7/8 7/16 5-1/2C-28 7/8 7/8 7/16 5-1/2C-30 15/16 1 1/2 5-7/8C-32 1 1 1/2 5-7/8
Series EMC40D4 Flute Double-End End Mills
Part No. Mill Diameter
Shank Diameter
Flute Length OAL
B-4 1/8 3/8 3/8 3-1/16B-5 5/32 3/8 7/16 3-1/8B-6 3/16 3/8 1/2 3-1/8B-7 7/32 3/8 9/16 3-1/4B-8 1/4 3/8 5/8 3-1/4B-9 9/32 3/8 11/16 3-3/8B-10 5/16 3/8 3/4 3-3/8B-11 11/32 3/8 3/4 3-1/2B-12 3/8 3/8 3/4 3-1/2B-13 13/32 1/2 1 3-1/2B-14 7/16 1/2 1 4-1/8B-15 15/32 1/2 1 4-1/8B-16 1/2 1/2 1 4-1/8B-18 9/16 5/8 1-3/8 5B-20 5/8 5/8 1-3/8 5B-22 11/16 3/4 1-5/8 5-5/8B-24 3/4 3/4 1-5/8 5-5/8B-26 13/16 7/8 1-5/8 6-1/8B-28 7/8 7/8 1-7/8 6-1/8B-30 15/16 1 1-7/8 6-3/8B-32 1 1 1-7/8 6-3/8
80Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LSEN
D M
ILLS
Series TDA50 • Regular Length2 Flute Single-End End Mills
• High Speed Steel• For Cutting Aluminum
Part No. Mill Diameter
Shank Diameter
Flute Length OAL
A-8 1/4 3/8 3/8 2-1/2A-10 5/16 3/8 7/16 2-1/2A-12 3/8 3/8 7/16 2-1/2A-14 7/16 3/8 3/8 2-11/16A-16 1/2 3/8 7/16 3-1/4
A-20X 5/8 3/8 7/16 3-3/8A-20 5/8 3/8 3/8 3-3/4A-24 3/4 3/8 7/16 3-7/8A-28 7/8 3/8 7/16 4-1/8A-32 1 3/8 3/8 4-1/2A-40 1 1/4 3/8 7/16 4-1/2A-48 1-1/2 3/8 7/16 4-1/2A-56 1-3/4 1-1/4 2 4-1/2A-64 2 1-1/4 2 4-1/2
Series TDA51 • Long Length2 Flute Single-End End Mills
Part No. Mill Diameter
Shank Diameter
Flute Length OAL
AL-8 1/4 3/8 1-1/4 3-1/8AL-10 5/16 3/8 1-3/8 3-1/8AL-12 3/8 3/8 1-1/2 3-1/4AL-14 7/16 1/2 1-3/4 3-3/4AL-16 1/2 1/2 2 4AL-20 5/8 5/8 2-1/2 4-5/8AL-24 3/4 3/4 3 5-1/4AL-28 7/8 7/8 3-1/2 5-3/4AL-32 1 1 4 6-1/2AL-40 1-1/4 1-1/4 4 6-1/2AL-48 1-1/2 1-1/2 4 6-1/2AL-56 1 -/4 5/8 4 6-1/2AL-64 2 1-1/4 4 6-1/2
Series TDA52 • Extra Long Length2 Flute Single-End End Mills
Part No. Mill Diameter
Shank Diameter
Flute Length OAL
AX-8 1/4 3/8 1-3/4 3-9/16AX-10 5/16 3/8 1 3-3/4AX-12 3/8 3/8 2-1/2 4-1/4AX-14 7/16 1/2 3 4-3/4AX-16 1/2 1/2 4 5AX-20 5/8 5/8 4 6-1/8AX-24 3/4 3/4 5 6 -/4AX-28 7/8 7/8 6 7-1/4AX-32 1 1 6 8-1/2AX-40 1-1/4 1-1/4 6 8-1/2
AX-48X 1-1/2 1-1/4 6 8-1/2AX-48 1-1/2 1-1/4 8 10-1/2
PREMIUM CUTTING TOOLSSingle-End End Mills
81Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRILLSEND M
ILLSPREMIUM CUTTING TOOLSMulti-Flute End Mills
Series EMC40SRegular Length
• High Speed Steel• Center Cutting
Part No.
Mill Dia.
Shank Dia.
Flute Length
No. OfFlutes OAL
F-4 1/8 3/8 3/8 4 2-5/16F-6 3/16 3/8 1/2 4 2-3/8F-8 1/4 3/8 5/8 4 2-7/16
F-10 5/16 3/8 3/4 4 2-1/2F-12 3/8 3/8 3/4 4 2-1/2F-14 7/16 3/8 1 4 2-11/16
F-16X 1/2 3/8 1 4 2-11/16F-16 1/2 1/2 1-1/4 4 3-1/4F-18 9/16 1/2 1-3/8 4 3-3/8
F-20X 5/8 1/2 1-3/8 4 3-3/8F-20 5/8 5/8 1-5/8 4 3-3/4
F-22X 11/16 1/2 1-5/8 4 3-5/8F-22 11/16 5/8 1-5/8 4 3-3/4
F-24X 3/4 1/2 1-5/8 4 3-5/8F-24 3/4 5/8 1-5/8 4 3-3/4
F-24W 3/4 3/4 1-5/8 4 3-7/8F-26 13/16 5/8 1-7/8 6 4
F-26Y 13/16 3/4 1-7/8 4 4-1/8F-28Y 7/8 1/2 1-5/8 4 3-5/8F-28X 7/8 5/8 1-7/8 6 4F-28W 7/8 3/4 1-7/8 4 4-1/8F-28 7/8 7/8 1-7/8 4 4-1/8
F-30X 15/16 5/8 1-7/8 6 4F-30Y 15/16 3/4 1-7/8 4 4-1/8F-30 15/16 7/8 1-7/8 4 4-1/8
F-32A 1 1/2 1-7/8 4 3-7/8
Part No.
Mill Dia.
Shank Dia.
Flute Length
No. OfFlutes OAL
F-32X 1 5/8 1-7/8 6 4F-32W 1 3/4 1-7/8 4 4-1/8F-32 1 7/8 1-7/8 4 4-1/8
F-32Y 1 1 2 4 4-1/2F-36W 1-1/8 3/4 2 6 4-1/8F-36X 1-1/8 7/8 2 6 4 1/4F-36 1-1/8 1 2 6 4-1/2
F-39W 1-1/4 3/4 2 6 4 1/4F-40X 1-1/4 7/8 2 6 4 1/4F-40 1-1/4 1 2 6 4-1/2
F-40Y 1-1/4 1-1/4 2 6 4-1/2F-40A 1-1/4 1-1/4 2 4 4-1/2F-44W 1-3/8 3/4 2 6 4-1/4F-44 1-3/8 1 2 6 4-1/2
F-48W 1-1/2 3/4 2 6 4 1/4F-48 1-1/2 1 2 6 4-1/2
F-48A 1-1/2 1-1/4 2 4 4-1/2F-48X 1-1/2 1-1/4 2 6 4-1/2F-52 1-5/8 1-1/4 2 6 4-1/2F-56 1-3/4 1-1/4 2 6 4-1/2
F-56A 1-3/4 1-1/4 2 4 4-1/2F-60 1-7/8 1-1/4 2 6 4-1/2F-64 2 1-1/4 2 8 4-1/2
F-64A 2 1-1/4 2 4 4-1/2F-64B* 2 1-1/4 2 6 4-1/2F-64W* 2 3/4 2 8 4-1/2
*Available while supplies last The Eagle-Taptek AdvantageUnmatched quantities in stock allow same-day shipmentEagle Taptek maintains a large Inventory of hard to find products in stockTools not normally shown as standard sizes in catalogs are available for immediate delivery at prices below made-to-order items.
82Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LSEN
D M
ILLS
PREMIUM CUTTING TOOLSMulti-Flute End Mills
Series EMC40LLong Length
• High Speed Steel• Center Cutting
Part No.
Mill Dia.
Shank Dia.
Flute Length
No. OfFlutes OAL
FL-8 1/4 3/8 1-1/4 4 3-1/16FL-10 5/16 3/8 1-3/8 4 3-1/8FL-12 3/8 3/8 1-1/2 4 3-1/4FL-14 7/16 1/2 1-3/4 4 3-3/4FL-16 1/2 1/2 2 4 4FL-20 3/8 3/8 2-1/2 4 4-5/8
FL-20X 5/8 1/2 2-1/2 4 4-5/8FL-24 3/4 3/4 3 4 5-1/4
FL-24X 3/4 1/2 3 4 5-1/4FL-28 7/8 7/8 3-1/2 4 5-3/4FL-32 1 1 4 4 6-1/2FL-36 1-1/8 1 4 6 6-1/2FL-40 1-1/4 1 4 6 6-1/2
FL-40X 1-1/4 1-1/4 4 6 6-1/2FL-40A 1-1/4 1-1/4 4 4 6-1/2FL-44 1-3/8 1 4 6 6-1/2FL-48 1-1/2 1-1/4 4 6 6-1/2
FL-48A 1-1/2 1-1/4 4 4 6-1/2FL-48X 1-1/2 1 4 6 6-1/2FL-56 1-3/4 1-1/4 4 6 6-1/2
FL-56A 1-3/4 1-1/4 4 4 6-1/2FL-64 2 1-1/4 4 8 6-1/2
FL-64A 2 1-1/4 4 4 6-1/2FL-64B 2 1-1/4 4 6 6-1/2
Part No.
Mill Dia.
Shank Dia.
Flute Length OAL
RF-4 1/8 3/8 3/8 2-5/16RF-6 3/16 3/8 1/2 2-3/8RF-8 1/4 3/8 5/8 2-1/16RF-10 5/16 3/8 3/4 2-1/2RF-12 3/8 3/8 3/4 2-1/2RF-14 7/16 3/8 1 2-11/16RF-16 1/2 1/2 1-1/4 3-1/4RF-18 9/16 1/2 1-3/8 3-3/8RF-20 5/8 5/8 1-3/8 3-3/4RF-24 3/4 3/4 1-5/8 3-7/8RF-28 7/8 7/8 1-7/8 4-1/8RF-32 1 1 2 4-1/2RF-40 1-1/4 1-1/4 2 4-1/2RF-48 1-1/2 1-1/4 2 4-1/2
The Eagle-Taptek AdvantageUnmatched quantities in stock allow same-day shipmentEagle Taptek maintains a large Inventory of hard to find products in stockTools not normally shown as standard sizes in catalogs are available for immediate delivery at prices below made-to-order items.
Series TCX53 • Regular Length, Ball End4 Flute thru 1 • 6 Flute over 1
83Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRILLSEND M
ILLSPREMIUM CUTTING TOOLSSolid Carbide End Mills
Series TDD50 • Standard LengthSquare End Center Cutting
• Single End General Purpose End Mills• 30° Helix - Right Hand Spiral/Right Hand Cut
Flute Dia.
Dec. Equil.
Shank Dia.
Flute Length OAL 2
Flute4
Flute
1/16 .0625 1/8 3/16 1-1/2 2004S 4004S5/64 .0781 1/8 1/4 1-1/2 2005S 4005S3/32 .0938 1/8 3/8 1-1/2 2006S 4006S7/64 .1094 1/8 3/8 1-1/2 2007S 4007S1/8 .1250 1/8 3/8 1-1/2 2008S 4008S9/64 .1406 3/16 9/16 2 2009S 4009S5/32 .1562 3/16 9/16 2 2010S 4010S11/64 .1719 3/16 9/16 2 2011S 4011S3/16 .1875 3/16 9/16 2 2012S 4012S
13/64 .2031 1/4 5/8 2 2013S 4013S7/32 .2188 1/4 5/8 2-1/2 2014S 4014S
15/64 .2344 1/4 3/4 2-1/2 2015S 4015S1/4 .2500 1/4 3/4 2-1/2 2016S 4016S
17/64 .2656 5/16 3/4 2-1/2 2017S 4017S9/32 .2812 5/16 3/4 2-1/2 2018S 4018S19/64 .2969 5/16 13/16 2-1/2 2019S 4019S5/16 .3125 5/16 13/16 2-1/2 2020S 4020S3/8 .3750 3/8 7/8 2-1/2 2024S 4024S7/16 .4375 7/16 1 2-3/4 2028S 4028S1/2 .5000 1/2 1 3 2032S 4032S
9/16 .5625 9/1 1-1/4 3-1/2 2036S 4036S5/8 .6250 5/8 1-1/4 3-1/2 2040S 4040S
11/16 .6875 3/4 1-1/2 4 2044S 4044S3/4 .7500 3/4 1-1/2 4 2048S 4048S7/8 .8750 7/8 1-1/2 4 2056S 4056S1 1.0000 1 1-1/2 4 2100S 4100S
Tolerances:Sizes to 1/4: +.000, -.0029/32 to 1: +.000, -.003Shank Dia.: +.0000, -.0005
Series TDD60 • Standard LengthBall End
Flute Dia.
Dec. Equil.
Shank Dia.
Flute Length OAL 2
Flute4
Flute
1/16 .0625 1/8 3/16 1-1/2 2004B 4004B5/64 .0781 1/8 1/4 1-1/2 2005B 4005B3/32 .0938 1/8 3/8 1-1/2 2006B 4006B7/64 .1094 1/8 3/8 1-1/2 2007B 4007B1/8 .1250 1/8 3/8 1-1/2 2008B 4008B9/64 .1406 3/16 9/16 2 2009B 4009B5/32 .1562 3/16 9/16 2 2010B 4010B11/64 .1719 3/16 9/16 2 2011B 4011B3/16 .1875 3/16 9/16 2 2012B 4012B
13/64 .2031 1/4 5/8 2 2013B 4013B7/32 .2188 1/4 5/8 2-1/2 2014B 4014B15/64 .2344 1/4 3/4 2-1/2 2015B 4015B1/4 .2500 1/4 3/4 2-1/2 2016B 4016B
17/64 .2656 5/16 3/4 2-1/2 2017B 4017B9/32 .2812 5/16 3/4 2-1/2 2018B 4018B19/64 .2969 5/16 13/16 2-1/2 2019B 4019B5/16 .3125 5/16 13/16 2-1/2 2020B 4020B3/8 .3750 3/8 7/8 2-1/2 2024B 4024B7/16 .4375 7/16 1 2-3/4 2028B 4028B1/2 .5000 1/2 1 3 2032B 4032B
9/16 .5625 9/16 1-1/4 3-1/2 2036B 4036B5/8 .6250 5/8 1-1/4 3-1/2 2040B 4040B
11/16 .6875 3/4 1-1/2 4 2044B 4044B3/4 .7500 3/4 1-1/2 4 2048B 4048B7/8 .8750 7/8 1-1/2 4 2056B 4056B1 1.0000 1 1-1/2 4 2100B 4100B
2 Flute
4 Flute
2 Flute
4 Flute
84Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DRIL
LSEN
D M
ILLS
2 Flute
4 Flute
PREMIUM CUTTING TOOLSSolid Carbide End Mills
Series TDD50 • Stub LengthSquare End Center Cutting
• Double End General Purpose End Mills• 30° Helix - Right Hand Spiral/Right Hand Cut
Flute Dia.
Dec. Equil.
Shank Dia.
Flute Length OAL 2
Flute4
Flute
1/32 .0312 1/8 3/32 1-1/2 2002D 4002D3/64 .0469 1/8 1/8 1-1/2 2003D 4003D1/16 .0625 1/8 1/8 1-1/2 2004D 4004D3/32 .0938 1/8 3/16 1-1/2 2006D 4006D1/8 .1250 1/8 1/4 1-1/2 2008D 4008D
5/32 .1562 3/16 5/16 2 2010D 4010D3/16 .1875 3/16 3/8 2 2012D 4012D7/32 .2188 1/4 1/2 2-1/2 2014D 4014D1/4 .2500 1/4 1/2 2-1/2 2016D 4016D
5/16 .3125 5/16 1/2 2-1/2 2020D 4020D3/8 .3750 3/8 1/2 2-1/2 2024D 4024D
7/16 .4375 7/16 5/8 3 2028D 4028D1/2 .5000 1/2 5/8 3 2032D 4032D
Tolerances:Sizes to 1/4: +.000, -.0029/32 to 1: +.000, -.003Shank Dia.: +.0000, -.0005
Series TDD60 • Stub LengthBall End
Flute Dia.
Dec. Equil.
Shank Dia.
Flute Length OAL 2
Flute4
Flute
1/32 .0312 1/8 3/32 1-1/2 2002DB 4002DB3/64 .0469 1/8 1/8 1-1/2 2003DB 4003DB1/16 .0625 1/8 1/8 1-1/2 2004DB 4004DB3/32 .0938 1/8 3/16 1-1/2 2006DB 4006DB1/8 .1250 1/8 1/4 1-1/2 2008DB 4008DB
5/32 .1562 3/16 5/16 2 2010DB 4010DB3/16 .1875 3/16 3/8 2 2012DB 4012DB7/32 .2188 1/4 1/2 2-1/2 2014DB 4014DB1/4 .2500 1/4 1/2 2-1/2 2016DB 4016DB
5/16 .3125 5/16 1/2 2-1/2 2020DB 4020DB3/8 .3750 3/8 1/2 2-1/2 2024DB 4024DB
7/16 .4375 7/16 5/8 3 2028DB 4028DB1/2 .5000 1/2 5/8 3 2032DB 4032DB
Series TDD50 • Extra LongSquare End Center Cutting
• Single End General Purpose End Mills• 30° Helix - Right Hand Spiral/Right Hand Cut
Flute Dia.
Dec. Equil.
Shank Dia.
Flute Length OAL 2
Flute4
Flute
1/8 .1250 1/8 1 3 2008SL 4008SL3/16 .1875 3/16 1-1/8 3 2012SL 4012SL1/4 .2500 1/4 1-1/2 4 2016SL 4016SL5/16 .3125 5/16 1-5/8 4 2020SL 4020SL3/8 .3750 3/8 1-3/4 4 2024SL 4024SL7/16 .4375 7/16 3 6 2028SL 4028SL1/2 .5000 1/2 3 6 2032SL 4032SL5/8 .6250 5/8 3 6 2040SL 4040SL3/4 .7500 3/4 3 6 2048SL 4048SL1 1.0000 1 3 6 2100SL 4100SL
2 Flute
4 Flute
85
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Hand Taps ..........................................................................86Spiral Pointed Taps ............................................................87Special Thread Taps .....................................................88–89Combine Tap & Drill ...........................................................90Pipe Taps .....................................................................91–92Pulley Taps .........................................................................93Metric Taps ........................................................................94
TABL
E OF
CON
TENT
S
TAPS
86
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Series HT • HSS, Ground ThreadSeries HT-S • 3 Piece Set: Taper, Plug and Bottoming Chamfer
Taper: 7-10 Thread Chamfer Plug: 3-5 Thread Chamfer Bottoming: 1-2 Thread Chamfer
Size ThreadsPer Inch
Thread Limits
No.of Flutes
1/4 20 H3 41/4 28 H3 45/16 18 H3 45/16 24 H3 43/8 16 H3 43/8 24 H3 47/16 14 H3 47/16 20 H3 41/2 13 H3 41/2 20 H3 49/16 12 H3 49/16 18 H3 45/8 11 H3 45/8 18 H3 4
11/16 11 H3 411/16 16 H3 43/4 10 H3 43/4 16 H3 47/8 9 H4 47/8 14 H4 41 8 H4 41 12 H4 41 14 H4 4
1-1/8 7 H4 41-1/8 12 H4 41-1/4 7 H4 41-1/4 12 H4 61-3/8 6 H4 41-3/8 12 H4 61-1/2 6 H4 41-1/2 12 H4 6
2 4 -1/2 H4 6
Size ThreadsPer Inch
Thread Limits
No.of Flutes
0 80 H1 21 64 H1 21 72 H2 22 56 H2 32 64 H2 33 48 H2 33 56 H2 34 36 H2 34 40 H2 34 48 H2 35 40 H2 35 44 H2 36 32 H3 36 40 H2 38 32 H3 48 36 H2 410 24 H3 410 32 H3 412 24 H3 412 28 H3 4
HAND TAPSStandard HSS
Fractional Sizes Machine Screw Sizes
CALL FORSPECIAL SIZES
NOT SHOWN
87
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size ThreadsPer Inch
Thread Limits
No.of Flutes
1/4 20 H3 21/4 28 H3 25/16 18 H3 25/16 24 H3 23/8 16 H3 33/8 24 H3 37/16 14 H3 37/16 20 H3 31/2 13 H3 31/2 20 H3 39/16 12 H3 39/16 18 H3 35/8 11 H3 35/8 18 H3 33/4 10 H3 33/4 16 H3 37/8 9 H4 37/8 14 H4 31 8 H4 31 12 H4 31 14 H4 3
Size ThreadsPer Inch
Thread Limits
No.of Flutes
0 80 H1 21 64 H1 21 72 H2 22 56 H2 22 64 H2 23 48 H2 23 56 H2 24 36 H2 24 40 H2 24 48 H2 25 40 H2 25 44 H2 26 32 H3 26 40 H2 28 32 H3 28 36 H2 210 24 H3 210 32 H3 212 24 H3 212 28 H3 214 20 H3 2
SPIRAL POINTED TAPSStandard Plug Chamfer
Series SP • HSS, Ground Thread
Fractional Sizes Machine Screw Sizes
SEE
CUTTING FLUIDS
PAGE 128
SEE
TAP WRENCHES
PAGE 101
88
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Available Threads per Inch0 764 325 32, 366 36, 38, 48, 56, 607 36, 40, 488 24, 30, 40, 48, 56, 609 2410 28, 30, 36, 40, 48, 6012 32, 36, 40, 4814 20, 24
3/32 501/8 44, 485/32 32, 36, 403/16 16, 18, 24, 327/32 28, 32, 401/4 18, 22, 24, 26, 27, 30, 32, 36, 38, 40, 48, 56, 609/32 32, 405/16 13, 20, 22, 26, 27, 28, 30, 32, 36, 4011/32 323/8 13, 14, 18, 20, 22, 24, 27, 28, 30, 32, 36, 40
13/32 20, 327/16 12, 16, 18, 24, 26, 27, 28, 32, 4015/32 24, 32, 401/2 11, 12, 14, 16, 18, 20, 22, 24, 26, 28, 32, 36, 37, 40, 48, 50
17/32 329/16 10, 13, 16, 20, 24, 27, 28, 32, 36, 40, 485/8 10, 12, 13, 14, 16, 20, 24, 26, 27, 28, 30, 32, 36, 40, 48
11/16 12, 18, 20, 24, 27, 30, 32, 36, 403/4 8, 11, 11-1/2, 12, 14, 18, 20, 22, 24, 26, 27, 28, 30, 32, 36, 40, 48, 50
13/16 8, 10, 12, 14, 16, 18, 20, 24, 26, 27, 28, 32, 367/8 8, 10, 11, 12, 16, 18, 20, 24, 26, 27, 28, 30, 32, 36, 40
15/16 9, 10, 12, 14, 16, 18, 20, 24, 27, 321 7, 9, 10, 11, 16, 18, 20, 24, 26, 27, 28, 30, 32, 36, 40, 50
1-1/16 8, 10, 12, 14, 16, 18, 20, 24, 27, 28, 32
SPECIAL THREAD TAPSGround Thread
Size Available Threads per Inch1-1/8 10, 14, 16, 18, 20, 24, 27, 28, 321-5/32 141-3/16 8, 10, 12, 14, 16, 18, 20, 24, 27, 321-1/4 10, 14, 16, 18, 20, 24, 26, 27, 28, 321-5/16 6, 11, 241-3/8 10, 14, 16, 18, 20, 241-7/16 8, 12, 16, 18, 20, 271-1/2 4, 10, 14, 16, 18, 20, 24, 28, 321-9/16 12, 16, 18, 201-5/8 5-1/2, 10, 12, 14, 16, 18, 20
1-11/16 12, 16, 18, 20, 271-3/4 5, 6, 10, 12, 14, 16, 18, 20, 24, 36
1-13/16 8, 10, 12, 14, 16, 18, 201-7/8 5, 10, 12, 14, 16, 18, 20, 26
1-15/16 8, 10, 12, 16, 18, 202 6, 10, 14, 16, 18, 20
2-1/16 122-1/8 12, 16, 182-1/4 4-1/2, 12, 14, 16, 182-5/16 12, 14, 16, 182-3/8 12, 16, 182-1/2 4, 12, 162-9/16 122-5/8 8, 12, 16, 182-3/4 12, 16, 182-7/8 8, 12, 16
3 4, 12, 16, 183-1/8 8, 123-1/4 8, 123-1/2 4, 8, 123-3/4 8, 12
4 8, 124-1/2 12
High Speed SteelGround Thread
Series HTSpecify plug, bottoming, or taper when ordering
89
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SPECIAL THREAD TAPSGround Thread
• Eight Pitch Taps
Size No. of Flutes
1-1/8 41-1/4 41-3/8 41-1/2 61-5/8 61-3/4 61-7/8 6
2 62-1/8 62-1/4 62-3/8 62-1/2 62-3/4 6
3 63-1/2 8
4 8
Size Threadsper Inch
Thread Limits No. of Flutes
6 32 H3 36 40 H3 38 32 H3 48 36 H3 410 24 H3 410 32 H3 41/4 20 H3 41/4 28 H3 41/4 32 H3 45/16 18 H3 45/16 24 H3 43/8 16 H3 43/8 24 H3 47/16 14 H3 47/16 20 H3 41/2 13 H3 41/2 20 H3 49/16 12 H3 49/16 18 H3 45/8 11 H3 45/8 18 H3 4
11/16 11 H3 411/16 16 H3 43/4 10 H3 43/4 16 H3 47/8 9 H4 47/8 14 H4 41 8 H4 41 12 H4 41 14 H4 4
1-1/8 7 H4 41-1/8 12 H4 41-1/4 7 H4 41-1/4 12 H4 41-3/8 6 H4 41-3/8 12 H4 41-1/2 6 H4 41-1/2 12 H4 41-3/4 8 H4 4
• Left Hand Taps
Series HT • Ground Thread Series LHT • Ground Thread
Quality Imports
90
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Nominal Size Drill Size Thread
Length OAL
1/4-20 .2080 13/16 2-1/21/4-28 .2200 23/32 2-1/25/16-18 .2660 31/32 2-27/325/16-24 .2770 7/8 2-27/323/8-16 .3225 1-1/8 3-3/83/8-24 .3395 1 3-3/8
7/16-14 .3770 1-5/16 3-3/47/16-20 .3955 1-3/16 3-3/41/2-13 .4350 1-15/32 4-1/161/2-20 .4580 1-15/16 4-1/165/8-11 .5750 1-3/4 53/4-10 .7200 2 6
Nominal Size Drill Size Thread
Length OAL
4-40 .0910 3/8 1-7/84-48 .0945 11/32 1-7/85-40 .1040 13/32 1-15/166-32 .1115 15/32 26-40 .1170 7/16 28-32 .1375 33/64 2-1/810-24 .1545 5/8 2-3/810-32 .1635 9/16 2-3/812-24 .1805 11/16 2-3/812-28 .1860 21/32 2-3/8
COMBINED TAP AND DRILLGround Thread, Two Flute
Series DT Combined Tap & DrillGround Thread, Two Flute
Fractional Sizes Machine Screw Sizes
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
91
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Threads Per Inch
1/16 271/8 27(sm/sk)1/8 27(lg/sk)1/4 183/8 181/2 143/4 141 11-1/2
1-1/4 11-1/21-1/2 11-1/2
2 11-1/22-1/2 8
3 83-1/2 8
4 8
Size Threads Per Inch
1/16 271/8 271/4 183/8 181/2 143/4 141 11-1/2
1-1/4 11-1/21-1/2 11-1/2
2 11-1/22-1/2 8
3 83-1/2 8
4 8
PIPE TAPS
HSS Taper Pipe TapsGround Thread
HSS Straight Pipe TapsGround Thread, NPS
HSS Interrupted ThreadTaper Pipe TapsGround Thread, INT/NPT
Carbon Taper Pipe TapsCut Thread, NPT, Right Hand
Size Threads Per Inch
1/16 271/8 271/4 183/8 181/2 143/4 141 11-1/2
1-1/4 11-1/21-1/2 11-1/2
2 11-1/22-1/2 8
3 83-1/2 8
4 8
Size Threads Per Inch
1/16 271/8 271/4 183/8 181/2 143/4 141 11-1/2
1-1/4 11-1/21-1/2 11-1/2
2 11-1/2
Series PT Series PTS
Series IPT Series CPT
92
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Threads Per Inch
1/16 271/8 271/4 183/8 181/2 143/4 141 11-1/2
Size Threads Per Inch10 2410 321/4 20
5/16 183/8 161/2 13
LONG REACH NPT PIPE TAPS
Long Reach NPT Pipe TapsGround Thread
6” Extension TapsGround Thread, Plug Chamfer, Reduced Shank
Series PT-4 • NPT, 4” OALSeries PT-6 • NPT, 6” OALSeries PT-8 • NPT, 8” OAL
Series PT-12 • NPT, 12” OAL
Series ET • Hand TapsSeries ETS • Spiral Pointed
93
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Threads Per Inch No. of Flutes
6 32 28 32 210 24 210 32 21/4 20 21/4 28 25/16 18 25/16 24 23/8 16 33/8 24 37/16 14 37/16 20 31/2 13 31/2 20 35/8 11 35/8 18 33/4 10 33/4 16 37/8 14 3
Size Threads Per Inch No. of Flutes
6 32 48 32 410 24 410 32 41/4 20 41/4 28 4
5/16 18 45/16 24 43/8 16 43/8 24 4
7/16 14 47/16 20 41/2 13 41/2 20 45/8 11 45/8 18 43/4 10 43/4 16 4
1-3/8 12 6
Size Threads Per Inch No. of Flutes
1/4 20 41/4 28 45/16 18 45/16 24 43/8 16 43/8 24 47/16 14 47/16 20 41/2 13 41/2 20 45/8 11 45/8 18 43/4 10 43/4 16 47/8 9 4
PULLEY TAPS
• Ground Thread, Plug Chamfer
Series PLTS • Spiral Pointed Taps6” OAL
Series PLT • Hand Taps6” & 8” OAL
Series PLT • Hand Taps10” & 12” OAL
94
TAPS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Taper: 7-10 Thread Chamfer Plug: 3-5 Thread Chamfer Bottoming: 1-2 Thread Chamfer
Size Pitch mm
No. of Flutes
1.6 .35 21.8 .35 22 .40 3
2.2 .45 32.3 .40 32.5 .45 32.6 .45 32.8 .45 33 .50 33 .60 3
3.5 .60 34 .50 44 .70 44 .75 4
4.5 .75 45 .50 45 .80 45 .90 46 .50 46 .75 46 1.00 4
6.3 1.00 47 .50 47 1.00 48 .75 48 1.00 48 1.25 48 1.50 49 .50 49 1.00 49 1.25 410 .75 410 1.00 410 1.25 410 1.50 411 .75 4
Size Pitch mm
No. of Flutes
27 1.50 427 2.00 427 3.00 428 1.50 430 1.50 430 2.00 430 3.00 430 3.50 432 1.50 432 2.00 433 1.50 433 2.00 433 3.50 434 1.50 435 1.00 436 1.50 436 2.00 436 3.00 436 4.00 438 1.50 439 3.00 639 4.00 640 1.50 642 1.50 642 2.00 645 1.50 645 4.00 645 4.50 648 1.50 648 3.00 648 5.00 652 1.50 652 5.00 6
METRIC TAPSHigh Speed Steel
Size Pitch mm
No. of Flutes
11 1.25 411 1.50 412 1.00 412 1.25 412 1.50 412 1.75 413 1.25 414 1.00 414 1.25 414 1.50 414 2.00 415 1.00 415 1.50 415 2.00 416 1.00 416 1.50 416 2.00 417 1.50 418 1.00 418 1.50 418 2.00 418 2.50 420 1.00 420 1.50 420 2.00 420 2.50 422 1.00 422 1.50 422 2.00 422 2.50 424 1.00 424 1.50 424 2.00 424 3.00 425 1.50 426 1.50 4
Series MT • HSS, Ground ThreadSeries MT-S • 3 Piece Set: Plug, Bottoming and Taper Chamfer
95Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIESDIES
Split Dies ................................................................... 96-100Pipe Dies ..........................................................................101Rethreading Dies .....................................................102–104Tap & Die Sets .........................................................105–106Tap Wrenches ..................................................................107Die Stocks ........................................................................107
TABL
E OF
CON
TENT
S
96Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
13/16” Diameter
Threads Per Inch
0 801 641 722 562 643 483 564 404 485 405 446 326 408 328 3610 2410 3212 2412 281/4 201/4 285/16 185/16 24
1-1/2” Diameter
Threads Per Inch
1/4 201/4 285/16 185/16 243/8 163/8 247/16 147/16 201/2 131/2 209/16 129/16 185/8 115/8 18
11/16 1111/16 163/4 103/4 16
3” Diameter
Threads Per Inch
1 81 121 14
1-1/8 71-1/8 121-1/4 71-1/4 121-3/8 61-3/8 121-1/2 61-1/2 121-3/4 51-3/4 12
2 4-1/22 12
SPLIT DIESStandard Round Adjustable
• Screw Adjusting Type, Right Hand• Series RD
Fractional And Machine Screw Sizes
1” Diameter
Threads Per Inch
0 801 641 722 562 643 483 564 404 485 405 446 326 408 328 3610 2410 3212 2412 281/4 201/4 28
5/16 185/16 243/8 163/8 24
7/16 147/16 201/2 131/2 20
2” Diameter
Threads Per Inch
1/4 201/4 28
5/16 185/16 243/8 163/8 24
7/16 147/16 201/2 131/2 20
9/16 129/16 185/8 115/8 18
11/16 1111/16 163/4 103/4 167/8 197/8 141 81 121 14
2-1/2” Diameter
Threads Per Inch
1 81 121 14
1-1/8 71-1/8 121-1/4 71-1/4 121-3/8 61-3/8 121-1/2 6
SEE
ROUND DIE STOCKS
PAGE 101
97Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
Size mm Pitch mm13/16” Diameter
1 .251.2 .251.4 .301.6 .351.7 .351.8 .352 .40
2.2 .452.3 .402.5 .452.6 .453 .503 .60
3.5 .604 .504 .704 .75
4.5 .504.5 .755 .505 .805 .906 .506 .756 1.007 1.008 1.008 1.25
1” Diameter1.6 .351.8 .352 .40
2.2 .452.3 .402.5 .452.6 .453 .503 .60
3.5 .604 .504 .704 .75
4.5 .504.5 .755 .505 .805 .905 1.00
5.5 .906 .506 .756 1.006 1.25
Size mm Pitch mm2” Diameter
17 1.5018 1.5018 2.0018 2.5020 1.5020 2.0020 2.5022 1.0022 1.5022 2.0022 2.5024 1.5024 2.0024 3.0026 1.5027 2.0027 3.0028 1.5030 1.5030 2.0030 3.50
2-1/2” Diameter22 1.0022 1.5022 2.0022 2.5024 1.5024 2.0024 3.0026 1.5027 2.0027 3.0028 1.5028 2.0030 1.5030 2.0030 3.0030 3.5033 2.0033 3.5036 2.0036 3.0036 4.00
3” DiameTer30 2.0030 3.0030 3.5036 3.0036 4.0039 3.0039 4.0042 4.5045 4.5048 5.00
SPLIT DIESMetric
• Standard Round Adjustable Metric Split Dies• Screw Adjusting Type
Series RDM • Right Hand
Size mm Pitch mm1” Diameter
6.3 1.007 .757 1.008 .758 1.008 1.259 1.009 1.25
10 .7510 1.0010 1.2510 1.5011 1.0011 1.5012 1.0012 1.2512 1.75
1-1/2” Diameter6 1.007 1.008 1.259 1.009 1.25
10 .7510 1.0010 1.2510 1.5011 1.0011 1.5012 1.0012 1.2512 1.5012 1.7514 1.0014 1.2514 1.5014 2.0015 1.5016 1.0016 1.5016 2.0017 1.5018 1.5018 2.0018 2.5020 1.5020 2.0020 2.50
2” Diameter15 1.5016 1.0016 1.5016 2.00
Quality Imports
98Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
Size Threads per Inch
13/16” Diameter0 802 562 644 405 406 328 3210 24
Size Threads per Inch
2” Diameter3/4 103/4 167/8 97/8 141 81 121 14
SPLIT DIESLeft Hand
• Left Hand Round• Adjustable Split
Series RDL • Left HandFractional and Machine Screw Sizes
Size Threads per Inch
1” Diameter3 564 404 485 405 446 326 408 328 3610 2410 3212 2412 281/4 201/4 285/16 185/16 243/8 163/8 247/16 147/16 201/2 131/2 209/16 12
Size Threads per Inch
1-1/2” Diameter1/4 201/4 285/16 185/16 243/8 163/8 247/16 147/16 201/2 131/2 209/16 129/16 185/8 115/8 18
11/16 1111/16 163/4 103/4 16
Size Threads per Inch
2-1/2” Diameter1-1/8 71-1/8 121-1/4 71-1/4 121-3/8 61-3/8 121-1/2 61-1/2 12
Size Threads per Inch
3” Diameter1-1/2 61-1/2 121-3/4 5
2 4-1/2
SEE
ROUND DIE STOCKS
PAGE 101
99Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
• Round Adjustable Special• Thread Split Dies• High Speed Steel
Size Threads per Inch
13/16” Diameter4 365 486 36, 488 4010 36, 40, 48, 56, 6412 32
7/32 329/32 32
1” Diameter4 36, 56, 60, 645 48, 56, 646 30, 36, 48, 568 24, 30, 40, 48, 56, 6410 26, 27, 28, 30, 36, 40, 48, 56, 64, 8012 26, 27, 30, 32, 36, 40, 48, 50
5/32 407/32 24, 32, 4014 27, 28, 30, 321/4 14, 16, 18, 22, 24, 26, 27, 30, 32, 36, 40, 48, 56, 64, 80
5/16 16, 20, 22, 26, 27, 28, 30, 32, 36, 40, 48, 56, 64, 803/8 14, 18, 20, 22, 26, 27, 28, 30, 32, 36, 40, 48, 56, 64, 72
13/32 327/16 12, 16, 18, 24, 27, 28, 30, 32, 36, 40, 481/2 12, 14, 16, 18, 22, 24, 27, 28, 30, 32, 36, 40, 48, 56
1-1/2” Diameter1/4 22, 24, 27, 30, 32, 36, 40, 48
5/16 16, 20, 22, 27, 28, 30, 32, 36, 40, 483/8 14, 18, 20, 22, 26, 27, 28, 30, 32, 36, 40, 487/16 12, 16, 18, 22, 24, 27, 28, 30, 32, 36, 40, 4815/32 32
1/2 12, 14, 16, 18, 28, 22, 24, 27, 28, 30, 32, 36, 40, 489/16 14, 16, 20, 22, 24, 27, 28, 30, 32, 36, 40, 485/8 10, 12, 14, 16, 20, 22, 24, 26, 27, 28, 30, 32, 36, 40, 48
11/16 12, 14, 18, 20, 24, 27, 32, 36, 403/4 11-1/2, 12, 14, 18, 20, 24, 27, 28, 30, 32, 36, 40, 48
13/16 10, 12, 16, 20, 24, 28, 32 2” Diameter
7/16 18, 241/2 12, 16, 18, 24, 27, 28, 30, 32
9/16 14, 20, 24, 27, 28, 30, 32, 365/8 10, 12, 14, 16, 20, 24, 27, 28, 30, 32, 40
11/16 12, 14, 18, 20, 24, 27, 28, 32, 36, 403/4 12, 14, 18, 20, 24, 27, 28, 32, 36, 40
13/16 10, 12, 14, 16, 18, 20, 24, 27, 28, 30, 32, 36, 407/8 10, 12, 16, 18, 20, 24, 27, 28, 30, 32, 36, 40, 48
15/16 10, 12, 14, 16, 18, 20, 24, 27, 28, 30, 321 10, 16, 18, 20, 24, 26, 27, 28, 30, 32, 36, 40, 48, 56
1-1/16 12, 14, 16, 18
SPLIT DIESSpecial Thread
Series RD • Right Hand
Quality Imports
100Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
• Round Adjustable Special• Thread Split Dies• High Speed Steel
SPLIT DIESSpecial Thread
Series RD • Right Hand (continued)
Size Threads per Inch
2-1/2” Diameter1 10, 16, 18, 20, 24, 26, 27, 28, 32
1-1/16 7, 8, 10, 12, 14, 16, 18, 20, 24, 281-1/8 8, 10, 14, 16, 17, 20, 24, 27, 28, 30, 321-3/16 7, 8, 10, 12, 14, 16, 18, 20, 24, 27, 28, 321-1/4 6, 8, 10, 14, 16, 18, 20, 24, 26, 27, 28, 30, 32, 36, 401-5/16 8, 12, 14, 16, 18, 20, 24, 27, 321-3/8 7, 8, 10, 14, 16, 18, 20, 24, 27, 321-7/16 6, 8, 12, 16, 18, 201-1/2 7, 8, 10, 14, 16, 18, 20, 24, 27, 30, 32
3” Diameter1 10, 16, 18, 20, 24
1-1/16 8, 10, 12, 14, 16, 18, 20, 241-1/8 8, 10, 14, 16, 18, 20, 241-3/16 8, 12, 161-1/4 6, 8, 10, 14, 16, 18, 20, 241-5/16 8, 10, 12, 14, 16, 18, 201-3/8 8, 10, 14, 16, 18, 20, 241-7/16 6, 8, 12, 16, 181-1/2 8, 10, 14, 16, 18, 20, 241-9/16 6, 8, 12, 16, 18, 20, 321-5/8 5, 5-1/2, 6, 8, 10, 12, 14, 16, 18, 20
1-11/16 6, 8, 12, 16, 181-3/4 5-1/2, 6, 8, 10, 14, 16, 18, 20, 24
1-13/16 8, 10, 12, 14, 16, 18, 201-7/8 5, 5-1/2, 6, 8, 10, 12, 14, 16, 18, 20
1-15/16 10, 12, 14, 16, 18, 202 4, 6, 8, 10, 14, 16, 18, 20, 24
4” Diameter2-1/8 182-1/4 4-1/2, 8, 12, 162-3/8 162-1/2 4, 8, 122-3/4 12, 16
3 8, 12
Quality Imports
101Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
Size Threadsper Inch
1” Diameter1/16 271/8 27
1-1/2” Diameter1/8 271/4 183/8 181/2 14
2” Diameter1/4 183/8 181/2 143/4 14
Size Threadsper Inch
2-1/2” Diameter1 11-1/2
3” Diameter1-1/4 11-1/21-1/2 11-1/2
4” Diameter1-1/2 11-1/2
2 85” Diameter
2-1/2 83 8
Size Threadsper Inch
1/8 271/4 183/8 181/2 143/4 141 11-1/2
1-1/4 11-1/21-1/2 11-1/2
2 11-1/23 8
PIPE DIES
Series RPDNPT Pipe Sizes, Right Hand
Series RPSDNPS Pipe Sizes, Right Hand
Series SPD • Carbon SteelSolid Square Pipe Dies
QUALITYIMPORTSFOR OVER30 YEARS
102Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
Size Threads per Inch Available
1/4 24, 27, 32, 36, 40, 485/16 16, 20, 27, 32, 403/8 18, 20, 27, 32, 407/16 24, 28, 32, 401/2 16, 18, 24, 28, 32, 409/16 16, 20, 24, 325/8 16, 20, 24, 32
11/16 18, 20, 243/4 18, 20, 24, 32
13/16 16, 20, 24, 327/8 16, 18, 20, 24, 32, 40
15/16 14, 16, 18, 201 10, 16, 18, 20, 24, 32
1-1/16 8, 12, 16, 181-1/8 8, 16, 18, 201-3/16 8, 10, 12, 181-1/4 5, 8, 10, 16, 18, 201-5/16 8, 12, 181-3/8 7, 8, 10, 16, 18, 201-7/16 6, 8, 12, 16, 181-1/2 8, 14, 16, 18, 20
1-9/16 12, 16, 18, 201-5/8 4, 5, 5-1/2, 6, 8, 10, 12, 14, 16, 18
1-11/16 181-3/4 5-1/2, 6, 8, 10, 14, 16, 18, 20
1-13/16 12, 181-7/8 5, 8, 12, 16, 18
2 4, 8, 10, 12, 14, 16, 18, 20, 242-1/8 6, 8, 12, 14, 16, 182-1/4 4, 6, 8, 10, 12, 14, 16, 182-3/8 4, 8, 10, 12, 14, 182-1/2 4-1/2, 5, 6, 8, 10, 12, 16, 182-5/8 6, 8, 12, 14, 162-3/4 6, 8, 10, 12, 14, 182-7/8 6, 8, 12
3 8, 123-1/8 4, 8, 123-1/4 5, 8, 123-3/8 4, 8, 123-1/2 8, 123-5/8 4, 8, 123-3/4 8, 123-7/8 4, 8, 12
4 8, 12
RETHREADING DIES
• Hexagon Special Rethreading Dies• Carbon Steel
Series CHD • Right Hand
103Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
• Hexagon Rethreading Dies• Carbon Steel
RETHREADING DIES
Size Threads per Inch Available
2 564 364 404 485 405 446 326 408 328 36
10 2410 3212 2412 281/4 201/4 28
5/16 185/16 243/8 163/8 24
7/16 147/16 201/2 131/2 20
9/16 129/16 185/8 115/8 18
11/16 1111/16 16
Series CHD • Right HandSeries LHD • Left Hand
Series MHD • Right HandMetric Sizes
Size Threads per Inch Available
3/4 103/4 167/8 97/8 141 81 121 14
1-1/8 71-1/8 121-1/4 71-1/4 121-3/8 61-3/8 121-1/2 61-1/2 12
1-5/8 5-1/2
1-3/4 5
2 4-1/2
2-1/4 4-1/2
2-1/2 4
2-3/4 4
3 4
3-1/4 4
3-1/2 4
3-3/4 44 4
Size mm Threads per Inch Available
20 2.5022 1.5022 2.5024 2.0024 3.0026 1.5027 2.0027 3.0028 1.5030 2.0030 3.5033 2.0033 3.5036 3.0036 4.0039 3.0039 4.0040 1.5042 1.5042 3.0045 1.5045 4.5048 1.5048 5.0052 1.5052 5.00
Size mm Threads per Inch Available
3 .503 .60
3.5 .604 .704 .75
4.5 .755 .805 .906 .756 1.00
6.3 1.007 1.008 1.008 1.259 1.009 1.25
10 1.2510 1.5011 1.5012 1.2512 1.5012 1.7514 1.5014 2.0016 1.5016 2.0018 1.5018 2.0018 2.5020 1.50
Quality Imports
104Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
Size Threads Per Inch
1/8 271/4 183/8 181/2 143/4 141 11-1/2
1-1/4 11-1/21-1/2 11-1/2
2 11-1/22-1/2 8
3 8
RETHREADING DIES
• High Speed Hexagon• Rethreading Dies
Size Threads per Inch
1/4 201/4 28
5/16 185/16 243/8 163/8 24
7/16 147/16 201/2 131/2 20
9/16 129/16 185/8 115/8 183/4 103/4 167/8 97/8 141 81 121 14
• NPT Hexagon• Rethreading Dies
Series HHD Series NHD – Carbon SteelSeries HND – High Speed Steel
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
105Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
77 Piece Carbon Fractional and Metric Tap &Hex Die Set
Tap and Dies Included Sizes Tools Included4-40 3x0.50
•1 Die stock•1 Plain Die stock•1 T-Tap Wrench
•1 Hex Nut with 3/8 Sq. Drive
•1 Hex Nut Screw Pitch Gauge(Metric)
•1 Screw Pitch Gauge•1 Screwdriver
•2 Adj. Handle Tap Wrenches
6-32 4x0.708-32 4x0.7510-24 5x0.8010-32 5x0.9012-24 6x1.001/4-20 7x1.001/4-28 8x1.005/16-18 8x1.255/16-24 9x1.003/8-16 9X1.253/8-24 10X1.257/16-14 10X1.507/16-20 11X1.501/2-13 12X1.501/2-20 12X1.75
1/8-27 NPT 1/8-28 BSP
40 Piece Inch HSS Tap &Round Adjustable Die Set
Tap and Dies Included Sizes Tools Included4-40 5/16-24
•3 Tap Wrenches•1 Die Stock (1OD)
•1 Screw Pitch Gauge•1 Screwdriver
6-32 3/8-168-32 3/8-2410-24 7/16-1410-32 7/16-2012-24 1/2-131/4-20 1/2-201/4-28 1/8 NPT5/16-18
40 Piece Inch Carbon Tap &Round Adjustable Die Set
Tap and Dies Included Sizes Tools Included4-40 5/16-24
•3 Tap Wrenches•1 Die Stock (1OD)
•1 Screw Pitch Gauge•1 Screwdriver
6-32 3/8-168-32 3/8-24
10-24 7/16-1410-32 7/16-2012-24 1/2-131/4-20 1/2-201/4-28 1/8 NPT5/16-18
TAP AND DIE SETS
40 Piece Carbon Metric Tap &Round Adjustable Die Set
Tap and Dies Included Sizes Tools Included3x0.50 8x1.25
•1 Tap Wrench•1 Piece Die Stock(1OD)
•1 Screw Pitch Gauge•1 Screwdriver
3x0.60 9x1.004x0.70 9x1.254x0.75 10x1.255x0.80 10x1.505x0.90 11x1.506x1.00 12x1.507x1.00 12x1.758x1.00 1/8 NPT
Set No. T&DS6040HS Set No. T&DS6040CS
Set No. T&DS6540M Set No. T&DS6076M/F
106Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
58 Piece Master Carbon Tap &Hex Die Set
Tap and Dies Included Sizes Tools Included
1/4-20 NC 5/8-11 NC
•5 Screw Extractors (#1 through #5)
•T-Handle Tap Wrench•2 Tap & Reamer
Wrenches•2 Die Stocks
•1 US Screw Pitch Gauge•1 Screwdriver
1/4-28 NF 5/8-18 NF
5/16-18 NC 3/4-10 NC
5/16-24 NF 3/4-16 NF
3/8-16 NC 1/8-27 NPT
3/8-24 NF 1/4-18 NPT
7/16-14 NC 6-32 NC
7/16-20 NF 8-32 NC
1/2-13 NC 10-32 NF
1/2-20 NF 10-24 NC
9/16-12 NC 12-24 NC
9/16-18 NF
77 Piece Master Carbon Tap &Hex Die Set
Tap and Dies Included Sizes Tools Included
1/4-20 NC 3/4-16 NF
•7 Screw Extractors (#1 through #7)
•T-Handle Tap Wrench•3 Tap & Reamer
Wrenches•3 Die Stocks
•1 US Screw Pitch Gauge•1 Screwdriver
1/4-28 NF 7/8-9 NC
5/16-18 NC 7/8-14 NF
5/16-24 NF 1-8 NC
3/8-16 NC 1-12 NF
3/8-24 NF 1/8-27 NPT
7/16-14 NC 1/4-18 NPT
7/16-20 NF 3/8-18 NPT
1/2-13 NC 1/2-14 NPT
1/2-20 NF 4-40 NC
9/16-12 NC 6-32 NC
9/16-18 NF 8-32 NC
5/8-11 NC 10-32 NF
5/8-18 NF 10-24 NC
3/4-10 NC 12-24 NC
TAP AND DIE SETS
12 Piece Carbon Pipe Tap & Hex Die Set
Tap and Dies Included Sizes1/8 NPT
1/43/81/23/41
Set No. T&DS6039-D Set No. T&DS6077-D
Set No. TDC500-40012
107Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
DIES
Tool Holding CapacityTool No.Fractional
Tap Sizes
Machine Screw Tap
Sizes
Pipe Tap Sizes
Hand Reamer Sizes
1/16 - 1/4 0-14 — 1/8 - 21/64 TW05/32 - 1/2 8-14 1/8 11/64 - 7/16 TW55/32 - 3/4 8-14 1/8 - 1/4 11/64 - 41/64 TW61/4 - 1-1/8 — 1/8 - 3/4 9/32 - 29/32 TW71/2 - 1-3/8 — 1/8 - 1 3/8 - 1-5/32 TW753/4 - 1-5/8 — 3/8 - 1-1/4 37/64 - 1-11/32 TW8
Holding CapacityToolNo.Fractional
Tap SizesMachine Screw
Tap Sizes
1/16-5/32 0-8 TWH-1-I5/32-1/4 8-12 TWH-2-I1/4-1/2 12 TWH-3-I
Holding CapacityToolNo.Fractional
Tap SizesMachine Screw
Tap Sizes
5/32-1/4 8-12 TWR-2-I1/4-1/2 12 TWR-3-I
TAP WRENCHES / DIE STOCKS
Diameter of Die
13/161
1-1/22
2-1/23
Series TW500 • Straight Type Series THT • Plain TypeT-Handle Tap Wrenches
Series THT-RReversible Ratchet Type
Series DS50Round Die Stocks
Quality Imports
108Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
REAMERS
Chucking Reamers ..................................................109–114Expansion Chucking Reamers .........................................115Jobber Reamers ..............................................................116Taper Pipe ........................................................................117Taper Pin Reamers ...........................................................117Shell Reamers .................................................................118Arbors ..............................................................................118Hand Reamers .................................................................119Hand Expansion Reamers ...............................................120Adjustable Hand Reamers ................................................121Bridge Reamers ................................................................122Aligning Reamers ............................................................123
TABL
E OF
CON
TENT
S
109Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
Size Decimal Equiv.
Flute Length OAL
1/32 .0312 1/2 2-1/23/64 .0469 1/2 2-1/21/16 .0625 1/2 2-1/25/64 .0781 3/4 33/32 .0938 3/4 37/64 .1094 7/8 3-1/21/8 .1250 7/8 3-1/29/64 .1406 1 45/32 .1562 1 411/64 .1719 1-1/8 4-1/23/16 .1875 1-1/8 4-1/213/64 .2031 1-1/4 57/32 .2188 1-1/4 5
15/64 .2344 1-1/2 61/4 .2500 1-1/2 6
17/64 .2656 1-1/2 69/32 .2812 1-1/2 6
19/64 .2969 1-1/2 65/16 .3125 1-1/2 6
21/64 .3281 1-1/2 611/32 .3438 1-1/2 623/64 .3594 1-3/4 73/8 .3750 1-3/4 7
25/64 .3906 1-3/4 713/32 .4062 1-3/4 727/64 .4219 1-3/4 77/16 .4375 1-3/4 7
29/64 .4531 1-3/4 715/32 .4688 1-3/4 731/64 .4844 2 81/2 .5000 2 8
33/64 .5156 2 817/32 .5312 2 835/64 .5469 2 89/16 .5625 2 8
37/64 .5781 2 819/32 .5938 2 839/64 .6094 2-1/4 95/8 .6250 2-1/4 9
41/64 .6406 2-1/4 9
Size Decimal Equiv.
Flute Length OAL
21/32 .6562 2-1/4 943/64 .6719 2-1/4 911/16 .6875 2-1/4 945/64 .7031 2-1/4 923/32 .7188 2-1/4 947/64 .7344 2-1/2 9-1/2
3/4 .7500 2-1/2 9-1/249/64 .7656 2-1/2 9-1/225/32 .7812 2-1/2 9-1/251/64 .7969 2-1/2 9-1/213/16 .8125 2-1/2 9-1/253/64 .8281 2-1/2 9-1/227/32 .8438 2-1/2 9-1/255/64 .8594 2-5/8 107/8 .8750 2-5/8 10
57/64 .8906 2-5/8 1029/32 .9062 2-5/8 1059/64 .9219 2-5/8 1015/16 .9375 2-5/8 1061/64 .9531 2-5/8 1031/32 .9688 2-5/8 1063/64 .9844 2-3/4 10-1/2
1 1.0000 2-3/4 10-1/21-1/32 1.0313 2-3/4 10-1/21-1/16 1.0625 2-3/4 10-1/21-3/32 1.0938 2-7/8 111-1/8 1.1250 2-7/8 111-5/32 1.1562 2-7/8 111-3/16 1.1875 2-7/8 111-1/4 1.2500 3 11-1/21-5/16 1.3125 3 11-1/21-3/8 1.3750 3-1/4 121-7/16 1.4375 3-1/4 121-1/2 1.5000 3-1/2 12-1/2
1-9/16 1.5625 3-1/2 12-1/21-5/8 1.6250 3-5/8 13
1-11/16 1.6875 3-5/8 131-3/4 1.7500 4 13-1/21-7/8 1.8750 4 14
2 2.0000 4 14
CHUCKING REAMERSHSS - Straight Shank
• Special Sizes Also Available
Quality ImportsSeries 533 • Straight Flute
Series 535 • Spiral Flute
FRACTIONAL SIZES
110Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
CHUCKING REAMERSHSS - Straight Shank
• Chucking Reamers• High Speed Steel - Straight Shank
Size Decimal Equiv.
Flute Length OAL
1 .2280 1-1/2 62 .2210 1-1/2 63 .2130 1-1/4 54 .2090 1-1/4 55 .2055 1-1/4 56 .2040 1-1/4 57 .2010 1-1/4 58 .1990 1-1/4 59 .1960 1-1/4 510 .1935 1-1/4 511 .1910 1-1/4 512 .1890 1-1/8 4-1/213 .1850 1-1/8 4-1/214 .1820 1-1/8 4-1/215 .1800 1-1/8 4-1/216 .1770 1-1/8 4-1/217 .1730 1-1/8 4-1/218 .1695 1-1/8 4-1/219 .1660 1-1/8 4-1/220 .1610 1-1/8 4-1/221 .1590 1-1/8 4-1/222 .1570 1 423 .1540 1 424 .1520 1 425 .1495 1 426 .1470 1 427 .1440 1 428 .1405 1 429 .1360 1 430 .1285 7/8 3-1/231 .1200 7/8 3-1/232 .1160 7/8 3-1/233 .1130 7/8 3-1/234 .1110 7/8 3-1/235 .1100 7/8 3-1/2
Size Decimal Equiv. Size Decimal
Equiv.
0.75 .0295 11.50 .45281.00 .0394 12.00 .47241.15 .0453 12.50 .49211.90 .0748 13.00 .51182.00 .0787 13.50 .53152.10 .0827 14.00 .55122.40 .0945 14.50 .57092.50 .0984 15.00 .59062.75 .1083 15.50 .61022.80 .1102 16.00 .62993.00 .1181 16.50 .64963.50 .1378 17.00 .66934.00 .1575 17.50 .68904.50 .1772 18.00 .70875.00 .1969 18.50 .72835.30 .2087 19.00 .74805.50 .2165 19.50 .76776.00 .2362 20.00 .78746.50 .2559 20.50 .80717.00 .2756 21.00 .82687.50 .2953 21.50 .84658.00 .3150 22.00 .86618.50 .3346 22.50 .88589.00 .3543 23.00 .90559.50 .3740 23.50 .925210.00 .3937 24.00 .944910.50 .4134 24.50 .964611.00 .4331 25.00 .9843
Size Decimal Equiv.
Flute Length OAL
36 .1065 7/8 3-1/237 .1040 7/8 3-1/238 .1015 7/8 3-1/239 .0995 7/8 3-1/240 .0980 7/8 3-1/241 .0960 7/8 3-1/242 .0935 3/4 343 .0890 3/4 344 .0860 3/4 345 .0820 3/4 346 .0810 3/4 347 .0785 3/4 348 .0760 3/4 349 .0730 3/4 350 .0700 3/4 351 .0670 1/2 2-1/252 .0635 1/2 2-1/253 .0595 1/2 2-1/254 .0550 1/2 2-1/255 .0520 1/2 2-1/256 .0465 1/2 2-1/257 .0430 1/2 2-1/258 .0420 1/2 2-1/259 .0410 1/2 2-1/260 .0400 1/2 2-1/261 .3900 1/2 2-1/262 .0380 1/2 2-1/263 .0370 1/2 2-1/264 .0360 1/2 2-1/265 .0350 1/2 2-1/266 .0330 1/2 2-1/267 .0320 1/2 2-1/268 .0310 1/2 2-1/269 .0292 1/2 2-1/270 .0280 1/2 2-1/2
Series 533 • Straight Flute
Series 535 • Spiral Flute
WIRE GAUGE SIZES METRIC SIZES
Quality Imports
111Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
• Chucking Reamers• High Speed Steel - Straight Shank Series 533 • Straight Flute
Series 535 • Spiral FluteQuality Imports
Size Flute Length OAL
.0623 7/8 3-1/2
.0627 7/8 3-1/2
.0780 7/8 3-1/2
.0782 7/8 3-1/2
.1230 7/8 3-1/2
.1240 7/8 3-1/2
.1247 7/8 3-1/2
.1251 7/8 3-1/2
.1260 7/8 3-1/2
.1855 1-1/8 4-1/2
.1865 1-1/8 4-1/2
.1870 1-1/8 4-1/2
.1885 1-1/8 4-1/2
.2480 1-1/2 6
.2490 1-1/2 6
.2495 1-1/2 6
.2510 1-1/2 6
.3105 1-1/2 6
.3115 1-1/2 6
.3120 1-1/2 6
.3135 1-1/2 6
.3730 1-3/4 7
Size Decimal Equiv.
Flute Length OAL
A .2340 1-1/2 6B .2380 1-1/2 6C .2420 1-1/2 6D .2460 1-1/2 6E .2500 1-1/2 6F .2570 1-1/2 6G .2610 1-1/2 6H .2660 1-1/2 6I .2720 1-1/2 6J .2770 1-1/2 6K .2810 1-1/2 6L .2900 1-1/2 6M .2950 1-1/2 6
CHUCKING REAMERSHSS - Straight Shank
Size Flute Length OAL
.3740 1-3/4 7
.3745 1-3/4 7
.3760 1-3/4 7
.4355 1-3/4 7
.4365 1-3/4 7
.4370 1-3/4 7
.4385 1-3/4 7
.4980 2 8
.4990 2 8
.4995 2 8
.5010 2 8
.6230 2-1/4 9
.6240 2-1/4 9
.6245 2-1/4 9
.6260 2-1/4 9
.7480 2-1/2 9-1/2
.7490 2-1/2 9-1/2
.7510 2-1/2 9-1/2
.8740 2-5/8 10
.8760 2-5/8 10
.9980 2-3/4 10-1/2
.9990 2-3/4 10-1/21.0010 2-3/4 10-1/2
Size Decimal Equiv.
Flute Length OAL
N .3020 1-1/2 6O .3160 1-1/2 6P .3230 1-1/2 6Q .3320 1-1/2 6R .3390 1-1/2 6S .3480 1-1/2 7T .3580 1-1/2 7U .3680 1-1/2 7V .3770 1-1/2 7W .3860 1-1/2 7X .3970 1-1/2 7Y .4040 1-1/2 7Z .4130 1-1/2 7
LETTER SIZES
DOWEL PIN SIZES
112Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
CHUCKING REAMERSHSS - Straight Shank
• Chucking Reamers• High Speed Steel - Straight Shank
SPECIAL DECIMAL SIZES
Quality Imports
Series 533 • Straight Flute
Series 535 • Spiral Flute
Size
.0305 .0727 .1010 .1244 .1390 .1557 .1750 .1937 .2150 .2330
.0325 .0755 .1017 .1245 .1395 .1580 .1755 .1940 .2155 .2335
.0340 .0757 .1025 .1248 .1397 .1582 .1760 .1942 .2160 .2340
.0355 .0767 .1045 .1249 .1400 .1583 .1765 .1945 .2170 .2350
.0365 .0777 .1050 .1253 .1402 .1585 .1775 .1950 .2175 .2352
.0405 .0790 .1055 .1255 .1410 .1595 .1780 .1955 .2180 .2355
.0415 .0792 .1057 .1258 .1415 .1600 .1785 .1965 .2185 .2360
.0425 .0802 .1067 .1265 .1420 .1605 .1790 .1975 .2190 .2365
.0435 .0805 .1070 .1267 .1421 .1615 .1795 .1980 .2195 .2370
.0470 .0812 .1075 .1268 .1425 .1620 .1800 .1985 .2200 .2375
.0475 .0815 .1082 .1270 .1427 .1625 .1805 .1995 .2205 .2385
.0490 .0822 .1084 .1275 .1430 .1630 .1810 .2005 .2215 .2390
.0495 .0826 .1097 .1277 .1432 .1635 .1815 .2015 .2220 .2395
.0500 .0845 .1107 .1280 .1435 .1640 .1822 .2020 .2225 .2400
.0505 .0867 .1112 .1290 .1445 .1645 .1825 .2025 .2230 .2405
.0510 .0875 .1115 .1295 .1450 .1650 .1830 .2030 .2235 .2410
.0525 .0880 .1120 .1297 .1455 .1655 .1832 .2035 .2240 .2415
.0535 .0887 .1125 .1300 .1460 .1665 .1835 .2045 .2242 .2425
.0540 .0902 .1132 .1305 .1465 .1670 .1845 .2050 .2245 .2430
.0545 .0912 .1155 .1310 .1475 .1675 .1860 .2060 .2250 .2435
.0555 .0915 .1175 .1315 .1480 .1680 .1862 .2065 .2255 .2437
.0560 .0918 .1180 .1320 .1485 .1685 .1863 .2070 .2260 .2438
.0565 .0920 .1185 .1322 .1490 .1690 .1872 .2075 .2265 .2440
.0575 .0922 .1190 .1325 .1500 .1695 .1877 .2080 .2270 .2442
.0590 .0930 .1192 .1335 .1505 .1700 .1882 .2085 .2275 .2445
.0613 .0950 .1195 .1340 .1510 .1705 .1885 .2095 .2285 .2447
.0622 .0952 .1200 .1345 .1512 .1707 .1897 .2100 .2290 .2450
.0632 .0957 .1205 .1350 .1515 .1710 .1900 .2105 .2295 .2455
.0637 .0962 .1210 .1355 .1525 .1715 .1905 .2110 .2300 .2465
.0662 .0964 .1215 .1365 .1530 .1720 .1915 .2115 .2305 .2470
.0667 .0970 .1220 .1370 .1535 .1725 .1920 .2120 .2310 .2475
.0680 .0971 .1225 .1375 .1545 .1727 .1925 .2125 .2312 .2482
.0682 .0985 .1227 .1377 .1550 .1735 .1927 .2135 .2315 .2485
.0702 .0992 .1235 .1380 .1552 .1740 .1930 .2140 .2320 .2492
.0722 .1005 .1243 .1385 .1555 .1745 .1933 .2145 .2325 .2497
113Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
CHUCKING REAMERSHSS - Straight Shank
• Chucking Reamers• High Speed Steel - Straight Shank
SPECIAL DECIMAL SIZES
Quality Imports
Series 533 • Straight Flute
Series 535 • Spiral Flute
Size
.2499 .2870 .3220 .3610 .3980 .4340 .4690 .5040 .5410 .5750 .6130
.2505 .2880 .3240 .3620 .3990 .4350 .4691 .5050 .5420 .5760 .6140
.2512 .2890 .3250 .3630 .3992 .4360 .4700 .5060 .5430 .5770 .6150
.2515 .2910 .3260 .3640 .4000 .4380 .4710 .5070 .5440 .5790 .6160
.2520 .2920 .3270 .3650 .4010 .4390 .4720 .5080 .5450 .5800 .6170
.2530 .2930 .3280 .3660 .4020 .4400 .4730 .5090 .5470 .5810 .6180
.2540 .2940 .3290 .3670 .4030 .4410 .4740 .5100 .5480 .5820 .6190
.2550 .2960 .3300 .3690 .4050 .4420 .4750 .5110 .5490 .5830 .6200
.2560 .2970 .3310 .3700 .4060 .4430 .4752 .5120 .5500 .5840 .6210
.2580 .2980 .3330 .3710 .4070 .4440 .4760 .5130 .5510 .5850 .6220
.2583 .2990 .3340 .3714 .4080 .4450 .4770 .5140 .5520 .5860 .6230
.2590 .3000 .3350 .3720 .4090 .4460 .4780 .5160 .5530 .5870 .6245
.2600 .3010 .3360 .3742 .4100 .4470 .4790 .5170 .5540 .5880 .6255
.2620 .3030 .3370 .3747 .4110 .4480 .4800 .5180 .5550 .5890 .7480
.2630 .3040 .3380 .3748 .4120 .4490 .4810 .5190 .5560 .5900 .7520
.2640 .3050 .3400 .3755 .4140 .4500 .4820 .5200 .5570 .5910 .7530
.2650 .3060 .3410 .3780 .4150 .4510 .4830 .5210 .5580 .5920 .7540
.2670 .3070 .3420 .3790 .4160 .4520 .4840 .5220 .5590 .5940 .7580
.2680 .3080 .3430 .3800 .4170 .4530 .4850 .5230 .5600 .5950 .8780
.2690 .3090 .3440 .3810 .4180 .4533 .4860 .5240 .5610 .5960 .8800
.2700 .3100 .3450 .3813 .4190 .4540 .4870 .5250 .5615 .5970 .9980
.2710 .3110 .3457 .3820 .4200 .4550 .4880 .5260 .5620 .5980 1.002
.2730 .3112 .3460 .3830 .4210 .4560 .4890 .5270 .5630 .5990 .5990
.2740 .3122 .3470 .3840 .4220 .4570 .4900 .5280 .5635 .6000
.2750 .3129 .3490 .3850 .4230 .4580 .4910 .5290 .5640 .6010
.2760 .3130 .3500 .3870 .4240 .4590 .4920 .5300 .5650 .6020
.2780 .3133 .3510 .3880 .4250 .4600 .4930 .5320 .5660 .6030
.2785 .3140 .3520 .3890 .4260 .4610 .4940 .5330 .5670 .6040
.2790 .3145 .3530 .3900 .4270 .4620 .4950 .5340 .5680 .6050
.2800 .3165 .3540 .3910 .4280 .4630 .4960 .5350 .5690 .6060
.2820 .3170 .3550 .3920 .4290 .4640 .4970 .5360 .5700 .6070
.2830 .3180 .3560 .3930 .4300 .4650 .5005 .5370 .5710 .6080
.2840 .3190 .3570 .3940 .4310 .4660 .5015 .5380 .5720 .6100
.2850 .3200 .3590 .3950 .4320 .4670 .5020 .5390 .5730 .6110
.2860 .3210 .3600 .3960 .4330 .4680 .5030 .5400 .5740 .6120
114Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
Size Decimal Equiv.
Flute Length OAL
MORSE TAPER
NO.
7/32 .2188 1-1/4 5 11/4 .2500 1-1/2 6 1G .2610 1-1/2 6 1
17/64 .2656 1-1/2 6 19/32 .2812 1-1/2 6 15/16 .3125 1-1/2 6 121/64 .3281 1-1/2 6 111/32 .3438 1-1/2 6 123/64 .3594 1-3/4 7 1
3/8 .3750 1-3/4 7 113/32 .4062 1-3/4 7 17/16 .4375 1-3/4 7 115/32 .4688 1-3/4 7 131/64 .4844 2 8 11/2 .5000 2 8 1
33/64 .5156 2 8 117/32 .5312 2 8 135/64 .5469 2 8 19/16 .5625 2 8 137/64 .5781 2 8 119/32 .5938 2 8 15/8 .6250 2-1/4 9 2
21/32 .6562 2-1/4 9 211/16 .6875 2-1/4 9 2
CHUCKING REAMERSHSS - Taper Shank
• Special Sizes Also Available
Series 536 • Straight FluteSeries 537 • Spiral Flute
Size Decimal Equiv.
Flute Length OAL
MORSE TAPER
NO.
45/64 .7031 2-1/4 9 223/32 .7188 2-1/4 9 247/64 .7344 2-1/2 9-1/2 2
3/4 .7500 2-1/2 9-1/2 225/32 .7812 2-1/2 9-1/2 213/16 .8125 2-1/2 9-1/2 227/32 .8438 2-1/2 9-1/2 2
7/8 .8750 2-5/8 10 229/32 .9062 2-5/8 10 215/16 .9375 2-5/8 10 331/32 .9688 2-5/8 10 3
1 1.0000 2-3/4 10-1/2 31-1/32 1.0312 2-3/4 10-1/2 31-1/16 1.0625 2-3/4 10-1/2 31-1/8 1.1250 2-7/8 11 31-5/32 1.1562 2-7/8 11 31-3/16 1.1875 2-7/8 11 31-1/4 1.2500 3 11-1/2 4
1-5/16 1.3125 3 11-1/2 41-3/8 1.3750 3-1/4 12 41-7/16 1.4375 3-1/4 12 41-1/2 1.5000 3-1/2 12-1/2 41-3/4 1.7500 4 13-1/2 4
2 2.0000 4 14-1/2 4
Quality Imports
115Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
EXPANSION CHUCKING REAMERSHigh Speed Steel
Size Decimal Equiv.
FluteLength OAL
11/32 .3438 3/4 6-3/43/8 .3750 3/4 7
13/32 .4062 3/4 77/16 .4375 7/8 7
15/32 .4688 7/8 71/2 .5000 1 8
17/32 .5312 1 89/16 .5625 1-1/8 8
19/32 .5938 1-1/8 85/8 .6250 1-1/4 9
21/32 .6562 1-1/4 911/16 .6875 1-1/4 923/32 .7188 1-1/4 93/4 .7500 1-3/8 9-1/2
25/32 .7812 1-3/8 9-1/213/16 .8125 1-3/8 9-1/227/32 .8438 1-3/8 9-1/2
7/8 .8750 1-1/2 1029/32 .9062 1-1/2 1015/16 .9375 1-1/2 1031/32 .9688 1-1/2 10
1 1.0000 1-5/8 10-1/21-1/32 1.0312 1-5/8 10-1/21-1/16 1.0625 1-5/8 10-1/2
Series 531 • Straight ShankSeries 532 • Taper Shank
Size Decimal Equiv.
FluteLength OAL
1-3/32 1.0938 1-3/4 10-1/21-1/8 1.1250 1-3/4 111-5/32 1.1562 1-5/8 10-1/21-3/16 1.1875 1-3/4 111-7/32 1.2188 1-7/8 111-1/4 1.2500 1-7/8 11-1/2
1-5/16 1.3125 1-7/8 11-1/21-3/8 1.3750 2 121-7/16 1.4375 2 121-1/2 1.5000 2-1/8 12-1/2
1-9/16 1.5625 2-1/8 12-1/21-5/8 1.6250 2-1/4 13
1-11/16 1.6875 2-1/4 131-3/4 1.7500 2-3/8 13-1/2
1-13/16 1.8125 2-3/8 13-1/21-7/8 1.8750 2-1/2 14
1-15/16 1.9375 2-1/2 142 2.0000 2-1/2 14
2-1/16 2.0125 2-3/4 14-1/22-1/8 2.1250 2-3/4 14-1/22-1/4 2.2500 2-3/4 14-1/22-3/8 2.3750 2-3/4 152-1/2 2.5000 3 15
3 3.0000 3 16
Quality Imports
116Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
JOBBER REAMERSHigh Speed Steel - Taper Shank
Size Decimal Equiv.
Flute Length OAL
MORSE TAPER
NO.
1/4 .2500 2 5-3/16 19/32 .2812 2 5-3/16 15/16 .3125 2-1/4 5-1/2 111/32 .3438 2-1/4 5-1/2 13/8 .3750 2-1/2 5-13/16 1
13/32 .4062 2-1/2 5-13/16 17/16 .4375 2-3/4 6-1/8 1
15/32 .4688 2-3/4 6-1/8 11/2 .5000 3 6-7/16 1
17/32 .5312 3 6-7/16 19/16 .5625 3-1/4 6-3/4 1
19/32 .5938 3-1/4 6-3/4 15/8 .6250 3-1/2 7-9/16 2
21/32 .6562 3-1/2 7-9/16 211/16 .6875 3-7/8 8 223/32 .7188 3-7/8 8 23/4 .7500 4-3/16 8-3/8 2
25/32 .7812 4-3/16 8-3/8 213/16 .8125 4-9/16 8-13/16 227/32 .8438 4-7/8 9-13/16 27/8 .8750 4-7/8 9-13/16 2
15/16 .9375 5-1/8 10 31 1.0000 5-7/16 10-3/8 3
1-1/16 1.0625 5-5/8 10-5/8 31-1/8 1.1250 5-13/16 10-7/8 31-3/16 1.1875 6 11-1/8 31-1/4 1.2500 6-1/8 12-9/16 41-5/16 1.3125 6-1/4 12-11/16 41-3/8 1.3750 6-5/16 12-13/16 41-7/16 1.4375 6-7/16 13 41-1/2 1.5000 6-1/2 13-1/8 4
Special Decimal Size
.2437 .2650 .3010 .3310 .3650 .3940 .4270
.2438 .2670 .3030 .3330 .3660 .3950 .4280
.2440 .2680 .3040 .3340 .3670 .3960 .4290
.2442 .2690 .3050 .3350 .3690 .3980 .4300
.2445 .2700 .3060 .3360 .3700 .3990 .4310
.2447 .2710 .3070 .3370 .3710 .3992 .4320
.2450 .2730 .3080 .3380 .3714 .4000 .4330
.2455 .2740 .3090 .3400 .3720 .4010 .4340
.2465 .2750 .3100 .3410 .3742 .4020 .4350
.2470 .2760 .3110 .3420 .3747 .4030 .4360
.2475 .2780 .3112 .3430 .3748 .4050 .4380
.2482 .2785 .3122 .3440 .3755 .4060 .4390
.2485 .2790 .3129 .3450 .3780 .4070 .4400
.2492 .2800 .3130 .3457 .3790 .4080 .4410
.2497 .2820 .3133 .3460 .3800 .4090 .4420
.2499 .2830 .3140 .3470 .3810 .4100 .4430
.2505 .2840 .3145 .3490 .3813 .4110 .4440
.2512 .2850 .3165 .3500 .3820 .4120 .4450
.2515 .2860 .3170 .3510 .3830 .4140 .4460
.2520 .2870 .3180 .3520 .3840 .4150 .4470
.2530 .2880 .3190 .3530 .3850 .4160 .4480
.2540 .2890 .3200 .3540 .3870 .4170 .4490
.2550 .2910 .3210 .3550 .3880 .4180 .4500
.2560 .2920 .3220 .3560 .3890 .4190 .4510
.2580 .2930 .3240 .3570 .3900 .4200 .4520
.2583 .2940 .3250 .3590 .3910 .4210 .4530
.2590 .2960 .3260 .3600 .3920 .4220 .4533
.2600 .2970 .3270 .3610 .3930 .4230 .4540
.2620 .2980 .3280 .3620 .3940 .4240 .4550
.2630 .2990 .3290 .3630 .3950 .4250 .4560
.2640 .3000 .3300 .3640 .3960 .4260 .4570
Series 600 • Straight Flute
Quality Imports
117Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
SizeDiameter Flute
Length OAL ShankSizeSmall End Large End
1/16 .2450 .2910 3/4 2 —1/8 .3160 .3620 3/4 2-1/8 .43751/4 .4060 .4720 1-1/16 2-7/16 .56253/8 .5400 .6060 1-1/16 2-9/16 .70001/2 .6650 .7510 1-3/8 3-1/8 .68753/4 .8760 .9620 1-3/8 3-1/4 .90631 1.1030 1.2120 1-3/4 3-3/4 1.1250
1-1/4 1.4440 1.5530 1-3/4 4 1.31251-1/2 1.6840 1.7930 1-3/4 4-1/4 1.5000
2 2.1590 2.2680 1-3/4 4-1/2 1.87502-1/2 2.5610 2.7220 2-5/8 5-1/2 2.2050
3 3.2020 3.3800 2-3/4 6 2.6250
SizeDiameter
Flute Length OAL Shank SizeSmall End Large End
7/0 .0497 .0666 13/16 1-13/16 5/646/0 .0611 .0806 15/16 1-15/16 3/325/0 .0719 .0966 1-3/16 2-3/16 7/644/0 .0869 .1142 1-5/16 2-5/16 1/83/0 .1029 .1302 1-5/16 2-5/16 9/642/0 .1137 .1462 1-9/16 2-9/16 5/320 .1287 .1638 1-11/16 2-15/16 11/641 .1447 .1798 1-11/16 2-15/16 3/162 .1605 .2008 1-15/16 3-3/16 13/643 .1813 .2294 2-5/16 3-11/16 15/644 .2071 .2604 2-9/16 4-1/16 17/645 .2409 .2994 2-13/16 4-5/16 5/166 .2773 .3540 3-11/16 5-7/16 23/647 .3297 .4220 4-7/16 6-5/16 13/328 .3971 .5050 5-3/16 7-3/16 7/169 .4805 .6066 6-1/16 8-5/16 9/16
10 .5799 .7216 6-13/16 9-5/16 5/811 .7060 .8780 8-1/4 11-1/4 11/1612 .8420 1.0500 10 13-5/8 3/413 1.0090 1.2590 12 16 1-1/1614 1.2500 1.5420 14 18-1/4 1-3/8
TAPER PIPE / TAPER PIN REAMERS
• Taper Pipe Reamers• High Speed Steel
Series 680 • Straight FluteSeries 680S • Spiral Flute
• Taper Pin Reamers• High Speed Steel
Series TR850 • Straight Flute Series TR875 • Spiral Flute Series TR800 • Helical Flute
118Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
Size OAL Hole Diameter
3/4 2-1/4 3/813/16 2-1/2 1/2
7/8 2-1/2 1/229/32 2-1/2 1/215/16 2-1/2 1/2
1 2-1/2 1/21-1/64 2-3/4 5/81-1/16 2-3/4 5/81-3/32 2-3/4 5/81-1/8 2-3/4 5/8
1-3/16 2-3/4 5/81-1/4 2-3/4 5/8
1-9/32 3 5/81-5/16 3 3/41-11/32 3 3/41-3/8 3 3/4
1-13/32 3 3/41-7/16 3 3/41-15/32 3 3/4
1-1/2 3 3/41-9/16 3 3/41-19/32 3 3/4
Size OAL Hole Diameter
2-5/8 4 1-1/22-11/16 4 1-1/22-3/4 4 1-1/2
2-13/16 4 1-1/22-7/8 4 1-1/2
2-15/16 4 1-1/23 4 1-1/2
3-1/16 4-1/2 1-3/43-1/8 4-1/2 1-3/43-3/16 4-1/2 1-3/43-1/4 4-1/2 1-3/43-5/16 4-1/2 1-3/43-3/8 4-1/2 1-3/43-7/16 4-1/2 1-3/43-1/2 4-1/2 1-3/43-9/16 5 23-5/8 5 2
3-11/16 5 23-3/4 5 2
3-13/16 5 23-7/8 5 2
3-15/16 5 24 5 2
SHELL REAMERS AND ARBORS
SizeFits Reamer Sizes
Arbor Dia. OALStraight Shank Taper Shank
Smallest Largest Shank Size Morse Taper No.4 21/32 25/32 3/8 9 1/2 25 13/16 1-1/32 1/2 9-1/2 5/8 26 1-1/16 1-9/32 5/8 10 3/4 37 1-5/16 1-21/32 3/4 11 7/8 38 1-11/16 2 1 12 1-1/8 49 2-1/16 2-1/2 1-1/4 13 1-3/8 410 2-9/16 3 1-1/2 14 1-5/8 511 3-1/16 3-1/2 1-3/4 15 2 512 3-9/16 4 2 16 2-1/8 5
• Shell Reamer Arbors• Hardend and Ground
Series 910 • Straight FluteSeries 911 • Spiral Flute
• Shell Reamers• High Speed Steel
Size OAL Hole Diameter
1-5/8 3 3/41-21/32 3-1/2 11-11/16 3-1/2 11-3/4 3-1/2 1
1-23/32 3-1/2 11-13/16 3-1/2 11-25/32 3-1/2 11-27/32 3-1/2 1
1-7/8 3-1/2 11-29/32 3-1/2 11-15/16 3-1/2 11-31/32 3-1/2 1
2 3-1/2 12-1/16 3-3/4 1-1/42-1/8 3-3/4 1-1/42-3/16 3-3/4 1-1/42-1/4 3-3/4 1-1/42-5/16 3-3/4 1-1/42-3/8 3-3/4 1-1/42-7/16 3-3/4 1-1/42-1/2 3-3/4 1-1/42-9/16 4 1-1/2
Series SRAS • Straight ShankSeries SRAT • Taper Shank
Quality Imports
119Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
HAND REAMERS
Size Decimal Equiv.
Flute Length OAL
3/64 .0469 1 21/16 .0625 1 25/64 .0781 1 23/32 .0938 1-1/4 2-1/27/64 .1094 1-1/4 2-1/21/8 .1250 1-1/2 3
9/64 .1406 1-5/8 3-1/45/32 .1560 1-5/8 3-1/411/64 .1719 1-3/4 3-1/23/16 .1875 1-3/4 3-1/27/32 .2188 1-7/8 3-3/415/64 .2344 2 41/4 .2500 2 4
9/32 .2812 2-1/8 4-1/419/64 .2969 2-1/4 4-1/25/16 .3125 2-1/4 4-1/211/32 .3438 2-3/8 4-3/423/64 .3594 2-1/2 53/8 .3750 2-1/2 5
25/64 .3906 2-5/8 5-1/413/32 .4062 2-5/8 5-1/427/64 .4219 2-3/4 5-1/27/16 .4375 2-3/4 5-1/229/64 .4531 2-7/8 5-3/415/32 .4688 2-7/8 5-3/431/64 .4844 3 61/2 .5000 3 6
17/32 .5312 3-1/8 6-1/435/64 .5469 3-1/4 6-1/29/16 .5625 3-1/4 6-1/237/64 .5781 3-3/8 6-3/419/32 .5938 3-3/8 6-3/439/64 .6094 3-1/2 75/8 .6250 3-1/2 7
41/64 .6406 3-11/16 7-3/8
Size Decimal Equiv.
Flute Length OAL
21/32 .6562 3-11/16 7-3/843/64 .6719 3-7/8 7-3/411/16 .6875 3-7/8 7-3/445/64 .7031 4-1/16 8-1/823/32 .7188 4-1/16 8-1/847/64 .7344 4-3/16 8-3/8
3/4 .7500 4-3/16 8-3/849/64 .7656 4-3/16 8-3/825/32 .7812 4-3/8 8-3/451/64 .7969 4-9/16 9-1/813/16 .8125 4-9/16 9-1/853/64 .8281 4-9/16 9-1/827/32 .8438 4-11/16 9-3/8
7/8 .8750 4-7/8 9-3/457/64 .8906 5 1029/32 .9062 5 1059/64 .9219 5-1/8 10-1/415/16 .9375 5-1/8 10-1/431/32 .9688 5-5/16 10-3/8
1 1.0000 5-7/16 10-7/81-1/16 1.0625 5-5/8 11-1/41-1/8 1.1250 5-13/16 11-5/81-3/16 1.1875 6 121-1/4 1.2500 6-1/8 12-1/4
1-5/16 1.3125 6-1/4 12-1/21-3/8 1.3750 6-5/16 12-5/81-7/16 1.4375 6-7/16 12-7/81-1/2 1.5000 6-1/2 13
1-19/32 1.5938 6-1/2 131-11/16 1.6875 6-3/4 13-1/21-3/4 1.7500 6-3/4 13-1/2
1-13/16 1.8125 7 13-3/41-15/16 1.9375 7 14
2 2.0000 7 142-1/2 2.5000 7-1/2 15
• High Speed Steel
Series 500 • Straight FluteSeries 503 • Spiral Flute
Quality Imports
120Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
• High Speed Steel
Size Decimal Equiv.
FluteLength OAL
1/4 .2500 1-7/16 4-1/45/16 .3125 1-3/4 4-1/23/8 .3750 1-3/4 5
13/32 .4062 1-3/4 57/16 .4375 1-3/4 5
15/32 .4688 1-13/16 5-1/21/2 .5000 1-13/16 5-1/2
17/32 .5312 2-1/8 69/16 .5625 2-1/8 65/8 .6250 2-1/2 6-1/2
11/16 .6875 2-1/2 6-3/43/4 .7500 2-11/16 7-1/16
13/16 .8125 3-1/16 7-9/167/8 .8750 3-5/16 8
15/16 .9375 3-9/16 8-3/81 1.0000 3-3/4 8-7/8
1-1/16 1.0625 4 9-3/161-1/8 1.1250 4-1/8 9-1/2
1-3/16 1.1875 4-1/4 9-7/81-1/4 1.2500 4-3/8 10-1/41-5/16 1.3125 4-1/2 10-5/81-3/8 1.3750 4-9/16 111-7/16 1.4375 4-3/4 11-3/81-1/2 1.5000 4-13/16 11-5/81-9/16 1.5625 4-13/16 11-7/81-5/8 1.6250 4-7/8 121-3/4 1.7500 5 12-3/81-7/8 1.8750 5 12-3/4
2 2.0000 5 13-1/16
HAND EXPANSION REAMERS
Series 750 • Straight FluteSeries 850 • Spiral Flute
Quality Imports
121Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
Size Range of Adjustment
Blade Length OAL
8/A 1/4 to 9/32 1-11/32 3-1/47/A 9/32 to 5/16 1-11/32 3-1/26/A 5/16 to 11/32 1-1/2 4-1/85/A 11/32 to 3/8 1-1/2 4-3/84/A 3/8 to 13/32 1-1/2 4-3/43/A 13/32 to 7/16 1-1/2 52/A 7/16 to 15/32 1-5/8 5-1/4A 15/32 to 17/32 1-5/8 5-1/2B 17/32 to 19/32 1-13/16 5-3/4C 19/32 to 21/32 2-1/16 6-1/2D 21/32 to 23/32 2-3/16 6-3/4E 23/32 to 25/32 2-1/2 7F 25/32 to 27/32 2-5/8 7-3/8G 27/32 to 15/16 3 8H 15/16 to 1-1/16 3-1/4 9I 1-1/16 to 1-3/16 3-3/8 10J 1-3/16 to 1-11/32 3-7/8 11K 1-11/32 to 1-1/2 4-1/4 12L 1-1/2 to 1-13/16 4-7/16 14M 1-13/16 to 2-7/32 5 16N 2-7/32 to 2-3/4 4-13/16 18O 2-3/4 to 3-11/32 5-3/16 20
ADJUSTABLE HAND REAMERS
• High Speed Steel
Series AHR
Quality Imports
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
122Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAM
ERS
• High Speed Steel
Size Approx. Point Size
No. of Flutes
FluteLength OAL Morse Taper
No.
9/32 5/32 4 4 7-1/4 111/32 5/32 4 4 7-1/4 27/16 1/4 5 4-3/8 8-1/4 2
15/32 1/4 5 5-1/8 9 21/2 9/32 5 5-1/8 9 2
33/64 9/32 5 5-1/8 9 217/32 9/32 5 5-1/8 9 29/16 11/32 5 5-1/8 9 2
37/64 3/8 5 5-1/8 9 25/8 3/8 5 6-1/8 10 2
11/16 25/64 5 7-1/8 11-3/4 33/4 7/16 5 7-3/8 12 3
25/32 1/2 5 7-3/8 12 313/16 1/2 5 7-3/8 12 3
7/8 9/16 5 7-3/8 12 329/32 5/8 5 7-3/8 12 315/16 5/8 5 7-3/8 12 3
1 11/16 5 7-3/8 12 31-1/32 3/4 5 7-3/8 12 31-1/16 3/4 5 7-3/8 12 31-1/8 13/16 5 7-3/8 12 31-5/32 7/8 5 7-3/8 12 31-3/16 7/8 5 7-3/8 12 31-7/32 15/16 4 7-3/8 13 41-1/4 15/16 5 7-3/8 13 41-9/32 1 5 7-3/8 13 41-5/16 1 5 7-3/8 13 41-11/32 1-1/8 4 7-3/8 13 41-3/8 1-1/8 5 7-3/8 13 4
1-13/32 1-3/16 4 7-3/8 13 41-7/16 1-3/16 5 7-3/8 13 41-1/2 1-1/4 5 7-3/8 13 4
1-17/32 1-3/8 4 7-3/8 13 41-9/16 1-3/8 4 7-3/8 13 41-5/8 1-3/8 5 7-3/8 13 4
1-11/16 1-11/16 5 7-3/8 13 41-3/4 1-11/16 5 7-3/8 13 51-7/8 1-11/16 4 7-3/8 13 5
2 1-11/16 6 7-3/8 13 5
BRIDGE REAMERS
Series BR850 • Type C Straight FluteSeries BR800 • Type D Spiral Flute
Quality Imports
123Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
REAMERS
Size FluteLength OAL Shank Size
1/4 2-1/2 4-3/8 1/4*5/16 2-3/4 4-5/8 5/163/8 2-3/4 4-5/8 3/87/16 3-1/2 5-3/8 7/161/2 4 5-7/8 1/29/16 4 5-7/8 1/239/64 4-1/2 6-3/8 1/2
5/8 4-1/2 6-3/8 1/211/16 4-1/2 6-3/8 1/23/4 5 6-7/8 1/2
13/16 5 6-7/8 1/27/8 5 6-7/8 1/2
15/16 5 6-7/8 1/21 5 6-7/8 1/2
1-1/16 5 6-7/8 1/2
ALIGNING REAMERS
• Straight Shank with 3-Equal Flats to Fit 1/2 Chuck• High Speed Steel
• Hex Shank Style• High Speed Steel
Series CR925 – Spiral Flute
Series CR975
Quality Imports
Size FluteLength OAL Shank Size
9/16 4" 6" 6-1/25/8 4-1/2" 7" 6-1/2
11/16 4-1/2" 7" 6-1/23/4 5" 7" 1-1/4
13/16 5" 7" 1-147/8 5" 7" 1-7/16
15/16 5" 7" 1-7/161" 5" 7" 1-7/16
1-1/16 5" 7" 1-5/81-1/8 5" 7" 1-5/8
1-3/16 5" 7" 1-13/161-1/4 5" 7" 1-13/16
1-5/16 5" 7" 2"1 5 6-7/8 1/2
1-1/16 5 6-7/8 1/2
124
BURR
S
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
BURRS
TABL
E OF
CON
TENT
S BURRS
Carbide Burrs Double Cut ................................................125Carbide Burr Sets .............................................................126Miniature Carbide Burrs ...................................................127Carbide Burrs Extra Long ..................................................128Carbide Burrs Aluminum ...................................................129
125
BURRS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
CARBIDE BURRSStandard Length
Tool No. Cutter Dia. Lengthof Cut
SA-11 1/8 1/2SA-14 3/16 5/8SA-1 1/4 5/8
SA-1L 1/4 1SA-2 5/16 3/4SA-3 3/8 3/4
SA-3L 3/8 1SA-3XL 3/8 1-1/2
SA-4 7/16 1SA-5 1/2 1SA-6 5/8 1SA-16 3/4 3/4SA-7 3/4 1SA-9 1 1
Tool No. Cutter Dia. Lengthof Cut
SB-11 1/8 1/2SB-14 3/16 5/8SB-1 1/4 5/8
SB-1L 1/4 1SB-2 5/16 3/4SB-3 3/8 3/4
SB-3L 3/8 1SB-4 7/16 1SB-5 1/2 1SB-6 5/8 1SB-16 3/4 3/4SB-7 3/4 1SB-9 1 1
Tool No. Cutter Dia. Lengthof Cut
SC-11 1/8 1/2SC-12 1/8 5/8SC-14 3/16 5/8SC-1 1/4 5/8
SC-1L 1/4 1SC-2 5/16 3/4SC-3 3/8 3/4
SC-3L 3/8 1SC-4 7/16 1SC-5 1/2 1SC-6 5/8 1SC-7 3/4 1SC-9 1 1
Tool No. Cutter Dia. Lengthof Cut
SD-11 1/8 1/8SD-14 3/16 3/16SD-1 1/4 1/4SD-2 5/16 5/16SD-3 3/8 3/8SD-4 7/16 7/16SD-5 1/2 1/2SD-6 5/8 5/8SD-7 3/4 3/4SD-9 1 1
Tool No. Cutter Dia. Lengthof Cut
SF-11 1/8 1/2SF-1 1/4 5/8SF-3 3/8 3/4SF-4 7/16 1
SF-13 1/2 3/4SF-5 1/2 1SF-6 5/8 1SF-7 3/4 1
SF-14 3/4 1-1/4SF-15 3/4 1-1/2
• Series CB• 1/4” Shank, Double Cut, Solid Carbide
Tool No. Cutter Dia. Lengthof Cut
SG-1 1/4 5/8SG-2 5/16 3/4SG-3 3/8 3/4SG-13 1/2 3/4SG-5 1/2 1SG-6 5/8 1SG-7 3/4 1SG-15 3/4 1
Cylindrical Round Tree ShapeCylindrical Ball End
Cylindrical End Cut Pointed Tree ShapeBall Shape
126
BURR
S
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Tool No. Cutter Dia. Lengthof Cut
SE-11 3/16 5/16SE-1 1/4 3/8SE-3 3/8 5/8SE-5 1/2 7/8SE-6 5/8 1SE-7 3/4 1
CARBIDE BURRSStandard Length
• Series CB • 1/4” Shank, Double Cut, Solid Carbide
Tool No. Cutter Dia. Lengthof Cut
SH-1 1/4 1/2SH-2 5/16 3/4SH-5 1/2 1-1/4SH-6 5/8 1-7/16SH-7 3/4 1-5/8
Tool No. Cutter Dia. Lengthof Cut
SJ-1 1/4 3/16SJ-2 5/16 1/4SJ-3 3/8 1/4SJ-5 1/2 7/16SJ-6 5/8 1/2SJ-7 3/4 5/8SJ-9 1 3/4
Flame Shape 60º Included AngleOval Shape
Set Includes Pieces Per Set
SA-1, SA-5, SC-3, SC-5, SD-1, SD-5, SF-3, SF-5
8
CB-S8-SET-608-D
Set Includes Pieces Per Set
SA-3, SC-3, SF-3, SG-3,
SL-35
CB-S5-SET-3/8-D
Set Includes Pieces Per Set
SA-5, SC-3, SC-5, SD-5, SF-3, SF-5, SG-3, SL-4
8
CB-S8-SET-D
Tool No. Cutter Dia.
Lengthof Cut
SK-1 1/4 1/8SK-2 5/16 3/16SK-3 3/8 3/16SK-5 1/2 1/4SK-6 5/8 5/16SK-7 3/4 3/8SK-9 1 1/2
Tool No. Cutter Dia.
Lengthof Cut
SM-1 1/4 1/2SM-2 1/4 3/4SM-3 1/4 1SM-4 3/8 5/8SM-5 1/2 7/8SM-6 5/8 1
Tool No. Cutter Dia.
Lengthof Cut
SL-1 1/4 5/8SL-2 5/16 7/8SL-3 3/8 1-1/16SL-4 1/2 1-1/8SL-5 5/8 1-3/16SL-6 5/8 1-5/16SL-7 3/4 1-1/2
90º Included Angle 14º Included AngleCone Shape
Tool No. Cutter Dia.
Lengthof Cut
SN-1 1/4 5/16SN-2 3/8 3/8SN-4 1/2 1/2SN-6 5/8 3/4SN-7 3/4 5/8
Inverted Cone Shape
127
BURRS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
MINIATURE CARBIDE BURRS
• 1/8” Shank, Double Cut• Solid Carbide• 1-1/2” Overall Length
Tool No. Cutter Dia. Lengthof Cut
SA-41 1/16 1/4SA-42 3/32 7/16SA-43 1/8 9/16SC-41 3/32 7/16SC-42 1/8 9/16SD-41 3/32 3/32SD-42 1/8 1/8SE-41 1/8 7/32SF-41 1/8 1/4SF-42 1/8 1/2SG-41 1/8 1/4SG-42 1/8 5/16SG-43 1/8 3/8SG-44 1/8 1/2SH-41 1/8 1/4SJ-42 1/8 3/32SK-42 1/8 1/16SL-41 1/8 3/8SL-42 1/8 1/2SM-41 1/8 11/32SM-42 1/8 7/16SM-43 1/8 5/8SN-42 1/8 3/16SA-51 1/4 1/2SB-51 1/4 3/16SC-51 1/4 1/2SD-51 1/4 7/32SE-51 1/4 3/8SF-51 1/4 1/2SG-51 1/4 1/2SM-51 1/4 1/2SN-51 1/4 1/4
Series CB
128
BURR
S
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
CARBIDE BURRSExtra Long
Tool No. Cutter Dia.
Lengthof Cut
SA-1L6 1/4 1/2SA-3L6 3/8 3/4SA-5L6 1/2 1
Tool No. Cutter Dia.
Lengthof Cut
SC-1L6 1/4 1/2SC-3L6 3/8 3/4SC-5L6 1/2 1
Tool No. Cutter Dia.
Lengthof Cut
SD-1L6 1/4 7/32SD-3L6 3/8 5/16SD-5L6 1/2 7/16
Tool No. Cutter Dia.
Lengthof Cut
SE-1L6 1/4 3/8SE-3L6 3/8 5/8SE-5L6 1/2 7/8
Tool No. Cutter Dia.
Lengthof Cut
SF-1L6 1/4 1/2SF-3L6 3/8 3/4SF-5L6 1/2 1
Tool No. Cutter Dia.
Lengthof Cut
SG-1L6 1/4 1/2SG-3L6 3/8 3/4SG-5L6 1/2 1
Tool No. Cutter Dia.
Lengthof Cut
SH-2L6 5/16 3/4SH-5L6 1/2 1-1/4
Tool No. Cutter Dia.
Lengthof Cut
SL-1L6 1/4 5/8SL-3L6 3/8 1-1/16SL-4L6 1/2 1-1/8
• 1/4” Shank• Double Cut• Solid Carbide
Series CB-L6 • 6” Overall Length
Cylindrical Shape Ball ShapeCylindrical Ball End
Oval Shape Pointed Tree ShapeRound Tree Shape
Flame Shape 14º Included Angle
129
BURRS
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
CARBIDE BURRSAluminum
Tool No. Cutter Dia. Lengthof Cut
SA-1NF 1/4 3/4SA-3NF 3/8 3/4SA-5NF 1/2 1SA-6NF 5/8 1SA-7NF 3/4 1
Tool No. Cutter Dia. Lengthof Cut
SC-1NF 1/4 3/4SC-3NF 3/8 3/4SC-5NF 1/2 1SC-6NF 5/8 1SC-7NF 3/4 1
Tool No. Cutter Dia. Lengthof Cut
SD-1NF 1/4 7/32SD-3NF 3/8 5/16SD-5NF 1/2 7/16SD-6NF 5/8 9/16SD-7NF 3/4 11/16
Tool No. Cutter Dia. Lengthof Cut
SE-3NF 3/8 5/8SE-5NF 1/2 7/8
SE-6NF 5/8 1SE-7NF 3/4 1
Tool No. Cutter Dia. Lengthof Cut
SF-1NF 1/4 3/4SF-3NF 3/8 3/4SF-5NF 1/2 1SF-6NF 5/8 1
SF-14NF 3/4 1-1/4
Tool No. Cutter Dia. Lengthof Cut
SL-3NF 3/8 1-1/16SL-4NF 1/2 1-1/8SL-5NF 5/8 1-3/16SL-6NF 5/8 1-5/16SL-7NF 3/4 1-1/2
• 1/4” Shank
Series CB-AL • 1/4 Shank
Cylindrical Shape Ball ShapeCylindrical Ball End
Oval Shape 14º Included AngleRound Tree Shape
130
OTHE
R
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
OTHER
TABL
E OF
CON
TENT
S OTHER / ANNULAR CUTTERS
Hole Saws ........................................................................131Mandrels ..........................................................................131Spade Wood Drills .............................................................132Tri-Cut Tungsten Hole Cutters ...........................................133Saw Blades ......................................................................134Shop Rolls ........................................................................135Files .................................................................................135Screw Extractors .............................................................136Cutting Fluids ...................................................................137Lubricants ........................................................................137Annular Cutters ........................................................ 138-139Carbide Tipped Cutters - Universal Shank ........................140
131
OTHER
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
HOLES SAWS / MANDRELS
Part No. Diameter
509 9/16510 5/8511 11/16512 3/4513 13/16514 7/8515 15/16516 1517 1-1/16518 1-1/8519 1-3/16520 1-1/4521 1-5/16522 1-3/8523 1-7/16524 1-1/2525 1-9/16526 1-5/8527 1-11/16528 1-3/4529 1-13/16530 1-7/8532 2533 2-1/16534 2-1/4536 2-1/4537 2-5/16538 2-3/8540 2-1/2541 2-9/16542 2-5/8544 2-3/4546 2-7/8558 3550 3-1/8552 3-1/4554 3-3/8556 3-1/2558 3-5/8560 3-3/4562 3-7/8564 4566 4-1/8568 4-1/4570 4-3/8572 4-1/2576 4-3/4580 5588 5-1/2592 5-3/4596 6
Part No. Diameter
C12 3/4C14 7/8C16 1C18 1-1/8C20 1-1/4C22 1-3/8C24 1-1/2C28 1-3/4C32 2C36 2-1/4C40 2-1/2C48 3C56 3-1/2C68 4-1/4
Part No. Diameter Length
8534 1/4 3-1/48536 1/4 4-1/4
Part No. Fits Hole Saws Shank For Chuck 5514 9/16 to 1-3/16 1/4 RND 1/45520 1-1/4 to 1-1/2 7/16 HEX 1/25545 1-1/4 to 6 7/16 HEX 1/25573 1-1/4 to 6 5/8 HEX 3/45519 9-16 to 1-3/16 3/8 HEX 1/2
5519 CT 9-16 to 1-3/16 3/8 HEX 1/25546 1-1/4 to 6 3/8 HEX 1/2
Series HS100Hole Saws
1-1/8” Cutting DepthStandard
Series HS100Pilot Pins
Series HS100 Carbide Tipped Hole Saws
1-7/8” Cutting DepthDeep Cuts
Series HSK100Hole Saw Kits
Series HS100Mandrels
Part No. Description
9595 Handyman’s KitDiameters = 7/8, 1, 1-1/8, 1-1/4, 1-1/2
9596 Journeyman’s KitDiameters = 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2
9599 Industrial KitDia = 1, 1-1/2, 1-1/4, 1-3/8, 1-3/4, 2, 2-1/4, 2-1/2, 3-1/4, 4
9592 Plumber’s KitDiameters = 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, 4, 2-1/4
9593Electrician’s Kit
Contains 6 Bi-Metal Hole SawsDiameters = 7/8, 1-1/8, 1-3/8, 1-3/4, 2, 2-1/2
132
OTHE
R
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SPADE WOOD DRILLS
Part No. Size
SB-WB.250 1/4"SB-WB.312 5/16"SB-WB.375 3/8"SB-WB.437 7/16"SB-WB.500 1/2"SB-WB.562 9/16"SB-WB.625 5/8"SB-WB.687 11/16"SB-WB.750 3/4"SB-WB.812 13/16"SB-WB.875 7/8"SB-WB.937 15/16"SB-WB.1000 1"SB-WB.1.125 1-1/8"SB-WB.1.250 1-1/4"SB-WB.1.375 1-3/8"SB-WB.1.500 1-1/2”
Part No. Size
SB-WB.25016 1/4"SB-WB.37516 3/8"SB-WB.43716 7/16"SB-WB.50016 7/8"SB-WB.62516 5/8"SB-WB.75016 3/4"SB-WB.81216 13/16"SB-WB.87516 7/8"SB-WB.93716 15/16"
SB-WB.100016 1"SB-WB1-12516 1-1/8”
6” LongSeries SB
16” Long
133
OTHER
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Inches MM
5/8 1611/16 173/4 19
13/16 217/8 22
15/16 241 25
1-1/16 27
1-1/8 291-3/16 301-1/4 32
1-5/16 331-3/8 35
1-7/16 371-1/2 38
1-9/16 401-5/8 41
1-11/16 431-3/4 44
1-13/16 461-7/8 48
1-15/16 492 51
• For Cutting Steels Up To 1” Thick
Series TCT – Long CutCarbide Tipped Hole Cutters
TRI-CUT TUNGSTEN CARBIDE TIPPED HOLE CUTTERS
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
134
OTHE
R
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Teeth Per Inch
14
18
24
SAW BLADES
Teeth Per Inch
14
18
24
32
Blade Length
Teeth Per Inch For Cutting
4 10 METAL OR WOOD
6 14 METAL OR WOOD
8 10-14 COMBO METAL & WOOD
12 2-3 METAL OR WOOD
12 6 METAL OR WOOD
Series BB-B44Portable Band Saw Blades
Bi-Metal
Series HS100-12Hack Saw Blades • Bi-Metal
12” Long Blades
Series RB-ULB1-2 Reciprocating Saw Blades
135
OTHER
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
SHOP ROLLS / FILES
Width Grit Size
1 401 501 601 801 1001 1201 1501 1801 2201 2401 2801 3201 400
Width Grit Size
1-1/2 401-1/2 501-1/2 601-1/2 801-1/2 1001-1/2 1201-1/2 1501-1/2 1801-1/2 2201-1/2 2401-1/2 2801-1/2 400
Width Grit Size
2 402 502 602 802 1002 1502 1802 2202 2402 2802 3202 4002 Crocus Cloth
Length Type
14 Half Round, Bastard
• Shop Rolls
Series TMM91Aluminum Oxide • Length = 50 Yards
• Files
Series F5000Sold in package of 12 only
Quality Imports
136
OTHE
R
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size
For Extracting Screws & Bolts
FractionalSizes
For Extracting Screws & Bolts
Metric SizesPipe Size Use Drill
Size
1 3/16 -1/4 2.5MM-4MM — 5/64"2 1/4-5/16 4MM-6MM — 7/64"3 5/16-7/16 6MM-8MM — 5/32"4 7/16-9/16 8MM-10MM 1/8 1/4"5 9/16-3/4 10MM-16MM 1/4 19/64"6 3/4 - 1 16MM-22MM 3/8 13/32"7 1 - 1-3/8 22MM-27MM 1/2 17/32"8 1-3/8 - 1-3/4 27MM-36MM 3/4 13/16"9 1 - 3/4 - 2-1/8 36MM-52MM 1 1-1/16"10 2-1/8 - 2-1/2 52MM-68MM 1-1/4 1-15/16"11 2-1/2 - 3 68MM-76MM 1/1/2 1-9/16"12 3 - 3-1/2 76MM-99MM 2 1-15/16"
5 Piece Screw Extractor Set
Contains 1 piece of each:Spiral Flute, #1 through #5Supplied in a vinyl pouch
SCREW EXTRACTORS
5 Piece Screw Extractor Set
Contains 1 piece of each:Spiral Flute, #1 through #5Supplied in a vinyl pouch
Set No. TSE500SP-5S-D
Series TSE 500SP • Straight Flute Series TSE500SP • Spiral Flute
Set No. TSE500SP-5S
EAGLE TAPTEKOFFERS
SAME DAYSHIPPING
137
OTHER
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Size Part No. Pkg Qty
1 lb TX25-6001-D 24
Size Part No. Pkg Qty
Dark1 gallon TX25-3003-D 45 gallon TX25-3004-D 1
55 gallon TX25-3005-D 1Light
1 gallon TX25-2003-D 45 gallon TX25-2004-D 155 gallon TX25-2005-D 1
Size(Net Wt.) Part No. Pkg Qty
17oz TX25-D1502-D 12
Size Part No. Pkg Qty
16 oz TX25-1332-D 121 gallon TX25-1333-D 45 gallon TX25-1334-D 1
EXTREME DUTY TAPPING FLUIDMIKE-O-CUT NO. 87• Increases Productivity• Extends Tool Life• Provides Excellent Finish and Accurate Threads• Will Not EvaporateMike-O-Cut No. 87 is an extreme duty tapping and drilling fluid. Considered environmentally safe. It is thick like honey and sticks to the tap throughout the operation. It is ideal for tapping and drilling stainless steel, carbon steel, inconel, monel, hastalloy, titanium, aluminum and other alloys and exotics.
THREAD CUTTING OILSMIKE-O-THREAD DARK AND LIGHT• Superb Cutting Ability• Penetrates Quickly• Rapidly Cools Dies• Fats and Sulfur Content Remain High• Provides an Excellent Finish on ThreadsMike-O-Thread Dark and Light are premium quality, heavy viscosity cutting oils which provide smooth, clean and accurate thread cutting on all metals. Sulfurized andchlorinated extreme pressure additives provide excellent lubrication in severe cutting applications such as pipe threading, sawing, and other difficult slowspeed operations.
AEROSOL TAPPING FLUIDTD FOAMY• Superior Finish & Threads• Extends Tool Life• Excellent Foaming Action• Use on All MetalsTD Foamy is an extreme duty tapping and drilling fluid designed for ease of application. This high performance product works well on ferrous and nonferrous materials and can be applied before or during the cutting operation. Its excellent foaming action penetrates deep into the cut to extend tap life and promote a superior finish.
MULTI-PURPOSE WAX LUBRICANTASHBURN WAX STICK• Safe for the Environment• Replaces Petroleum Cutting Oils and Solvent Based Tapping Fluids• Unaffected by Heat from Friction• Improves Finish and Size• Very Easy to UseAshburn Wax Stick is an innovative, multi-purpose lubricant which effectively removes heat and lubricates while withstanding tremendous pressures. It is often used as a replacement for tapping and cutting fluids. Wax Stick is ideal for sawing, drilling, tapping, pipe threading, and as a cement form release agent.
CUTTING FLUIDS
138
OTHE
R
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
ANNULAR CUTTERS, HSS
Diameter Decimal 1 DOC 2 DOC
7/16 0.438 TFZ-24114-ET* TFZ-24214-ET*
1/2 0.500 TFZ-24116-ET TFZ-24216-ET
9/16 0.563 TFZ-24118-ET TFZ-24218-ET
5/8 0.625 TFZ-24120-ET TFZ-24220-ET
11/16 0.688 TFZ-24122-ET TFZ-24222-ET
3/4 0.750 TFZ-24124-ET TFZ-24224-ET
13/16 0.813 TFZ-24126-ET TFZ-24226-ET
7/8 0.875 TFZ-24128-ET TFZ-24228-ET
15/16 0.938 TFZ-24130-ET TFZ-24230-ET
1 1.000 TFZ-24132-ET TFZ-24232-ET
1.1/16 1.063 TFZ-24134-ET TFZ-24234-ET
1.1/8 1.125 TFZ-24136-ET TFZ-24236-ET
1.3/16 1.188 TFZ-24138-ET TFZ-24238-ET
Diameter Decimal 1 DOC 2 DOC
1.1/4 1.250 TFZ-24140-ET TFZ-24240-ET
1.5/16 1.313 TFZ-24142-ET TFZ-24242-ET
1.3/8 1.375 TFZ-24144-ET TFZ-24244-ET
1.7/16 1.438 TFZ-24146-ET TFZ-24246-ET
1.1/2 1.500 TFZ-24148-ET TFZ-24248-ET
1.9/16 1.563 TFZ-24150-ET TFZ-24250-ET
1.5/8 1.625 TFZ-24152-ET TFZ-24252-ET
1.11/16 1.688 TFZ-24154-ET TFZ-24254-ET
1.3/4 1.750 TFZ-24156-ET TFZ-24256-ET
1.13/16 1.813 TFZ-24158-ET TFZ-24258-ET
1.7/8 1.875 TFZ-24160-ET TFZ-24260-ET
1.15/16 1.938 TFZ-24162-ET TFZ-24262-ET
2 2.000 TFZ-24164-ET TFZ-24264-ET
Series 24000 - Standard Imperial Sizes
• Max Hardness Rating 275 BHN (29 HRC)• Metric Sizes AvailableSofter Metals: YesMid Steels: YesStainless: Cobalt or TCT Recommended
• Pilot Pins For 24000 and T-Series • BHN (29 HRC)• Metric Sizes AvailableUSP-1A*: 1-A Tapered Pilot Pin for 1”USP-1s: Standard 1/4 Diameter Pin for 1” CuttersUSP-2A*: Tapered Pilot Pin for 2” Depth Cutters with Smaller Diameters USP-2: Standard 1/4 Diameter Pin for 2” Cutters
139
OTHER
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Series M42
Diameter Decimal 1DOC
2DOC
3DOC
4DOC
7/16 0.438 TFZ-25114-ET* TFZ-25214-ET* N/A N/A1/2 0.500 TFZ-25116-ET TFZ-25216-ET N/A N/A9/16 0.563 TFZ-25118-ET TFZ-25218-ET N/A N/A5/8 0.625 TFZ-25120-ET TFZ-25220-ET N/A N/A
11/16 0.688 TFZ-25122-ET TFZ-25222-ET N/A N/A3/4 0.75 TFZ-25124-ET TFZ-25224-ET TFZ-25324-ET TFZ-25424-ET
13/16 0.813 TFZ-25126-ET TFZ-25226-ET TFZ-25326-ET TFZ-25426-ET7/8 0.875 TFZ-25128-ET TFZ-25228-ET TFZ-25328-ET TFZ-25428-ET
15/16 0.938 TFZ-25130-ET TFZ-25230-ET TFZ-25330-ET TFZ-25430-ET1 1.000 TFZ-25132-ET TFZ-25232-ET TFZ-25332-ET TFZ-25432-ET
1-1/16 1.063 TFZ-25134-ET TFZ-25234-ET TFZ-25334-ET TFZ-25434-ET1-1/8 1.125 TFZ-25136-ET TFZ-25236-ET TFZ-25336-ET TFZ-25436-ET1-3/16 1.188 TFZ-25138-ET TFZ-25238-ET TFZ-25338-ET TFZ-25438-ET1-1/4 1.25 TFZ-25140-ET TFZ-25240-ET TFZ-25340-ET TFZ-25440-ET
1-5/16 1.313 TFZ-25142-ET TFZ-25242-ET TFZ-25342-ET1-3/8 1.375 TFZ-25144-ET TFZ-25244-ET TFZ-25344-ET1-7/16 1.438 TFZ-25146-ET TFZ-25246-ET TFZ-25346-ET1.-1/2 1.500 TFZ-25148-ET TFZ-25248-ET TFZ-25348-ET1-9/16 1.563 TFZ-25150-ET TFZ-25250-ET TFZ-25350-ET1-5/8 1.625 TFZ-25152-ET TFZ-25252-ET TFZ-25352-ET
1-11/16 1.688 TFZ-25154-ET TFZ-25254-ET TFZ-25354-ET1-3/4 1.750 TFZ-25156-ET TFZ-25256-ET TFZ-25356-ET
1-13/16 1.813 TFZ-25158-ET TFZ-25258-ET TFZ-25358-ET1-7/8 1.875 TFZ-25160-ET TFZ-25260-ET TFZ-25360-ET
1-15/16 1.938 TFZ-25162-ET TFZ-25262-ET TFZ-25362-ET2 2.000 TFZ-25164-ET TFZ-25264-ET TFZ-25364-ET
2-1/16 2.063 TFZ-25166-ET TFZ-25266-ET TFZ-25366-ET2-1/8 2.125 TFZ-25168-ET TFZ-25268-ET TFZ-25368-ET2-3/16 2.188 TFZ-25170-ET TFZ-25270-ET TFZ-25370-ET2-1/4 2.250 TFZ-25172-ET TFZ-25272-ET TFZ-25372-ET2-5/16 2.313 TFZ-25174-ET TFZ-25274-ET TFZ-25374-ET2-3/8 2.375 TFZ-25176-ET TFZ-25276-ET TFZ-25376-ET2-7/16 2.438 TFZ-25178-ET TFZ-25278-ET TFZ-25378-ET2-1/2 2.500 TFZ-25180-ET TFZ-25280-ET TFZ-25380-ET2-9/16 2.563 TFZ-25182-ET TFZ-25282-ET TFZ-25382-ET2-5/8 2.625 TFZ-25184-ET TFZ-25284-ET TFZ-25384-ET
2-11/16 2.688 TFZ-25186-ET TFZ-25286-ET TFZ-25386-ET2-3/4 2.750 TFZ-25188-ET TFZ-25288-ET TFZ-25388-ET
2-13/16 2.813 TFZ-25190-ET TFZ-25290-ET TFZ-25390-ET2-7/8 2.875 TFZ-25191-ET TFZ-25292-ET TFZ-25392-ET
2-15/16 2.938 TFZ-25194-ET TFZ-25294-ET TFZ-25394-ET3 3.000 TFZ-25196-ET TFZ-25296-ET TFZ-25396-ET
ANNULAR CUTTERS, COBALT
Now made with M42 Cobalt Incredible Tool lifeMore sizes than beforeNew Flute designMaximum Holes Per DollarMax Hardness Rating 350NHN (38HRC)
Softer Metals: YesSofter Metals: YesMild Steels YesStainless : YesHarder Alloys: TCT recommended
• Pilot Pins 25000 SeriesUSP1-A* Tapered Pilot Pin 1” Depth Cutters with Smaller Diameters USP-1 Standard 1/4 Diameter Pin for 1” CuttersUSP-2A* Tapered Pilot Pin for 2” Depth Cutters with Smaller Diameters USP-2 Standard 1/4 Diameter Pin for 2” CuttersUSP-3 1/4 Diameter Pin for 3” CuttersUSP-4 1/4 Diameter Pilot Pin for 4” Depth Cutters
140
OTHE
R
Eagle/Taptek Cutting Toolseagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Diameter Decimal 1DOC
2DOC
3DOC
4DOC
6DOC
9/16" 0.563 TFZ-27118-ET TFZ-27218-ET - - -5/8" 0.625 TFZ-27120-ET TFZ-27220-ET - - -
11/16" 0.688 TFZ-27122-ET TFZ-27222-ET - - -3/4" .0750 TFZ-27124-ET TFZ-27224-ET TFZ-27324-ET - -
13/16" 0.813 TFZ-27126-ET TFZ-27226-ET TFZ-27326-ET TFZ-27426-ET TFZ-27626-ET7/8" 0.875 TFZ-27128-ET TFZ-27228-ET TFZ-27328-ET TFZ-27428-ET TFZ-27628-ET
15/16" 0.938 TFZ-27130-ET TFZ-27230-ET TFZ-27330-ET TFZ-27430-ET TFZ-27630-ET1" 1.000 TFZ-27132-ET TFZ-27232-ET TFZ-27332-ET TFZ-27432-ET TFZ-27632-ET
1-1/16" 1.063 TFZ-27134-ET TFZ-27234-ET TFZ-27334-ET TFZ-27434-ET TFZ-27634-ET1-1/8" 1.125 TFZ-27136-ET TFZ-27236-ET TFZ-27336-ET TFZ-27436-ET TFZ-27636-ET1-3/16" 1.188 TFZ-27138-ET TFZ-27238-ET TFZ-27338-ET TFZ-27438-ET TFZ-27638-ET1-1/4" 1.250 TFZ-27140-ET TFZ-27240-ET TFZ-27340-ET TFZ-27440-ET TFZ-27640-ET1-5/16" 1.313 - TFZ-27242-ET TFZ-27342-ET TFZ-27442-ET TFZ-27642-ET1-3/8" 1.375 - TFZ-27244-ET TFZ-27344-ET - -1-7/16" 1.438 - TFZ-27246-ET TFZ-27346-ET - -1-1/2" 1.500 - TFZ-27248-ET TFZ-27348-ET - -1-9/16" 1.563 - TFZ-27250-ET TFZ-27350-ET - -1-5/8" 1.625 - TFZ-27252-ET TFZ-27352-ET - -
1-11/16" 1.688 - TFZ-27254-ET TFZ-27354-ET - -1-3/4" 1.750 - TFZ-27256-ET TFZ-27356-ET - -
1-13/16" 1.813 - TFZ-27258-ET TFZ-27358-ET - -1-7/8" 1.875 - TFZ-27260-ET TFZ-27360-ET - -
1-15/16" 1.938 - TFZ-27262-ET TFZ-27362-ET - -2" 2.000 - TFZ-27264-ET TFZ-27364-ET - -
2-1/16" 2.063 - TFZ-27266-ET TFZ-27366-ET - -2-1/8" 2.125 - TFZ-27268-ET TFZ-27368-ET - -2-3/16" 2.188 - TFZ-27270-ET TFZ-27370-ET - -2-1/4" 2.250 - TFZ-27272-ET TFZ-27372-ET - -2-5/16" 2.313 - TFZ-27274-ET TFZ-27374-ET - -2-3/8" 2.375 - TFZ-27276-ET TFZ-27376-ET - -
CARBIDE TIPPED CUTTERS WITH A UNIVERSAL SHANK
Carbide teeth can cut almost any metal.Carbide teeth can cut cast iron, hard and exotic alloys.Carbide teeth can cut interrupted or overlapping holes.Carbide teeth work great on bridges, truck frames, rail, plate, pipe, beam.Universal 3/4 shanks fit most magnetic base drills.
- E -EIGHT PITCH TAPS ....................................87EXPANSION REAMERS Chucking ...........................................113 Hand ..................................................118EXTENSION SOCKETS ..............................61EXTENSION TAPS ......................................90EXTRA LONG DRILLS Stright Shank HSS .........................42-43 Taper Shank HSS ...........................44-50EXTRACTORS, SCREW ...........................134
- F -FAST SPIRAL DRILLS ...........................19-20FILES .........................................................133FLUIDS, CUTTING .....................................135
- H -HACK SAW BLADES ................................132HAMMER DRILLS .......................................62HAND REAMERS ......................................117HAND TAPS .................................................84HEXAGON RETHREADING DIES ......100-102HOLE SAWS ..............................................129HOLE SAWS MANDRELS .........................129
- I -INTERCHANGABLE COUTERROBERS 74-75INTERRUPTED THREAD PIPE TAPS ........89
- J -JOBBER LENGTH DRILLS Aircraft .................................................41 Black & Gold ..................................16-17 Cobalt .............................................13-15 Fast Spiral ......................................19-20 General Purpose ..............................7-10 Heavy Duty .....................................11-12 Left Hand ........................................21-22 Metric ..............................................23-25 Tin Coated ...........................................18
- L -LEFT HAND Dies ......................................................96 Drills ...............................................21-22 Taps .....................................................87
- M -MACHINE TOOL ACCESSORIES ...............61MANDRELS FOR HOLE SAWS ................129MASONRY DRILLS Carbide Tipped ...................................63 Hammer ...............................................62 SDS Bits ..............................................62MINIATURE CARBIDE BURRS .................125MORSE TAPER Extension Sockets .............................61 Sleeves ................................................61
- N -NC/CNC SPOTTING DRILLS ......................72NPT DIES ..............................................99-102
- P -PILOTS ....................................................74-75PIPE DIES Hexagon Rethreading ...............100-102 Solid Square .......................................99 Round Adjustable ...............................99PIPE TAPSPREMIUM CUTTING TOOLS Double-End End Mills ........................77 Single-End End Mills ..........................78 Multi Flute End Mills ......................79-80 Solid Carbide End Mills ................81-82PULLEY TAPS .............................................91
- R -REAMERS Adjustable Hand ...............................119 Aligning .............................................121 Bridge ................................................120 Chucking ....................................107-113 Hand ..................................................117 Hand Expansion ...............................118 Jobber ...............................................114 Shell ...................................................116 Taper Pin ...........................................115 Taper Pipe .........................................115REDUCED SHANK DRILLS ...................39-40RETHREADING DIES .........................100-102ROUND ADJUSTABLE SPLIT DIES-STD 94-95ROUND DIE STOCKS ...............................105
- S -SAW BLADES ............................................132SCREW EXTRACTORS ............................134SCREW MACHINE LENGTH DRILLS Oxide Finish/ TIN Coated ..............29-32 Cobalt Heavy Duty .........................33-35 Left Hand ........................................36-38SDS DRILLSSHELL REAMERS & ARBORSSHOP ROLLS/ FILES ................................133SILVER & DEMING DRILLS ...................39-40SLEEVES, MORSE TAPERSPADE WOOD DRILLS .............................130SOLID CARBIDE DRILLS ......................68-70SPOTTING DRILLS .....................................72STEP DRILLS ..............................................72
- A -ADJUSTALE HAND REAMERS ................119AIRCRAFT DRILLS Extension ............................................41ALIGNING REAMERS ...............................121ANNULAR CUTTERS High Speed Steel ..............................136 Cobalt ................................................137 Carbide Tipped .................................138
- B -BODY DRILLS .............................................72BRIDGE REAMERS ...................................120BURRS Aluminum Carbide ...........................127 Carbide .......................................123-126
- C -CARBIDE Solid Drill ........................................68-70 Tipped Drills ...................................65-67CARBON TAPER PIPE TAPS .....................89CNC SPOTTING DRILLS ............................72COMBINED DRILL & COUNTERSINKS .....71COMBINED TAP & DRILLS ........................88CORE BITS ..................................................64CORE DRILLS ........................................59-60COUNTERBORES Interchangeable and Pilots ...........74-75CUTTING FLUIDS ......................................135COUNTERSINKS .........................................73
- D -DIES Hexagon Rethreading ...............100-102 Left Hand .............................................96 Metric Split ..........................................95 Pipe ......................................................99 Round Adjustable Split-Standard .....94 Special Thread ...............................97-98 Square .................................................99 Stocks ................................................105DRILL BUDDY ...............................................4DRILL SETS ................................................5-6DRILLS Aircraft Extension ..............................41 Black & Gold ..................................16-17 Body ....................................................72 Carbide Tipped ..............................65-67 Core ........................................................59-60 Extra Long ......................................42-50 Fast Spiral ......................................19-20 Jobber Length .................................7-25 Left Hand ........................................21-22 Masonry ...............................................63 Metric ..............................................23-25 NC/CNC Spotting ................................72 Reduced Shank .............................39-40 Screw Machine ..............................29-38 Silver & Deming .............................39-40 Solid Carbide .................................68-70 Spotting ...............................................72 Step ......................................................72 Taper Length ..................................26-28 Taper Shank ...................................51-58
ALPHABETICAL INDEXINDEX
141Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
ALPHABETICAL INDEX
INDE
X
- T -TAP & DIE SETS .................................103-104TAP WRENCHES .......................................105TAPER LENGTH DRILLS High Speed Steel ...........................26-28 Cobalt ..................................................28TAPER PIN REAMERS ..............................115TAPER PIPE TAPS ....................................115TAPER SHANK DRILLS Standard Shank HSS .....................51-53 Shank-Larger than Standard .............54 Shank-Smaller than Standard ...........55 Metric ..............................................56-57 Cobalt, Heavy Duty .............................58TAPS Combined Tap & Drill .........................88 Eight Pitch ...................................................87 Extentsion ...........................................90 Hand ....................................................84 Interrupted Thread .............................89 Left Hand .............................................87 Metric ...................................................92 Pipe .................................................89-90 Pulley ...................................................91 Spiral Pointed .....................................85 Special Thread ...............................86-87 Taper Pipe .........................................115TRI-CUT TUNGSTEN CARBIDE TIPPED HOLE CUTTERS ........................................131
- W -WRENCHES, TAP ....................................105
142Eagle/Taptek Cutting Tools
eagle-tool.com | 701 Sampson St. Houston, TX 77003 | (P) 800.950.8277 • (F) 713.227.2378
Flexible shipping ratesNo minimum orders
Most items immediately availableIn stock same day delivery
Blind drop shippingHard to find everyday items
Made in USA and Import brands
SALES@EAGLE-TOOL.COM | PHONE: 713.221.1600 OR 800.950.8277FAX: 713.227.2378 | 24/7 EMERGENCY CALL OUT NUMBER 281-702-2911
701 SAMPSON STREET, HOUSTON, TX 77003
WWW.EAGLE-TOOL.COM
EAGLE TAPTEK MAKES A DIFFERENCE