(2.1) Fundamentals Terms for magnitudes – logarithms and logarithmic graphs Digital...

Post on 26-Dec-2015

223 views 0 download

transcript

(2.1)Fundamentals

Terms for magnitudes– logarithms and logarithmic graphs

Digital representations–Binary numbers–Text–Analog information

Boolean algebra Logical expressions and circuits

(2.2)Information Technology Magnitude Terms

Large–kilo = 1,000–mega = 1,000,000–giga = 1,000,000,000– tera = 1,000,000,000,000–peta = 1,000,000,000,000,000

Small–milli = 1/1,000–micro = 1/1,000,000–nano = 1/1,000,000,000–pico = 1/1,000,000,000,000– femto = 1/1,000,000,000,000,000

(2.3)Logarithms

Because of these great differences in magnitudes, often use logarithms to represent values–a logarithm is the power to which some base must be raised to get a particular value

For example, the base 10 logarithm of 1000 (written log10 1000) is 3, since

103 = 1000

(2.4)Logarithm Scale Graphs

Graphs often use a logarithmic scale on one axis so that the data fit on a reasonable size graph

Intel Microprocessors

1

10

100

1000

10000

100000

1000000

10000000

1971

1973

1975

1977

1979

1981

1983

1985

1987

1989

1991

1993

1995

1997

Year

Tran

sist

ors

Transistors

(2.5)Logarithm Scale Graphs (continued)

The problem with this is that such graphs lose the impact of how rapidly the magnitudes change

Intel Microprocessors

0

1000000

2000000

3000000

4000000

5000000

6000000

7000000

8000000

1971

1973

1975

1977

1979

1981

1983

1985

1987

1989

1991

1993

1995

1997

Year

Tran

sist

ors

Transistors

(2.6)Binary Numbers

Digital systems operate using the binary number system–only two digits, 0 and 1– can be represented in computer several ways»voltage high or low»magnetized one direction or another

–each digit is a binary digit, or bit– referred to as being in base 2

Magnitudes of binary numbers determined using positional notation, just like decimal–269110 = 1*100 + 9*101 + 6*102 + 2*103

–1001012 = 1*20 + 0*21 + 1*22 + 0*23 + 0*24 + 1*25

(2.7)Converting Between Number Systems

To convert binary to decimal, simply perform arithmetic in base 10–1001012 = 1*20 + 0*21 + 1*22 + 0*23 + 0*24 + 1*25 = 1 + 4 + 32 = 37

To convert decimal to binary, divide the decimal value by 2– remainder is rightmost digit of binary number

– repeat on quotient37/2 = 18 remainder 118/2 = 9 remainder 09/2 = 4 remainder 14/2 = 2 remainder 02/2 = 1 remainder 01/2 = 0 remainder 1

binary number is

100101

(2.8)Converting Between Number Systems (continued)

Alternatively, build a table of powers of 2, write 1 by largest magnitude less than value to convert, then subtract that from the number and repeat until get to 0–produces number most significant digit first

Power of 2 DecimalEquivalent

BinaryNumber

New DecimalValue

5 32 1 37 - 32 = 54 16 03 8 02 4 1 5 - 4 = 11 2 00 1 1 1 - 1 = 0

(2.9)Binary Arithmetic

What happens if you add two digits in base 10 and get a result greater than 9?–generate a carry

Same thing happens if you add two binary digits and get a result greater than 1

5

+ 5

10

0 0 1 1

+ 0 + 1 + 0 + 1

0 1 1 10

(2.10)Binary Arithmetic (continued)

To do addition, we need just one more piece of information

Then, we can add two binary numbers by using the four cases on the previous slide and the identity above

10

+ 1

11

carry 1 1 1 1 0 0 0

addend 1 0 1 1 0 1 0

addend + 1 1 1 1 0 0

result 1 0 0 1 0 1 1 0

(2.11)Binary Arithmetic (continued)

Subtraction uses a similar idea, that of a borrow from the next column left when we’re trying to subtract a larger digit from a smaller

With binary digits, the same thing holds

1 6- 9 7

0 1 1 10

- 0 - 0 - 1 - 1

0 1 0 1

(2.12)Binary Arithmetic (continued)

Consider a couple examples

1 0 0 0

- 1

1 1 1

1 0 0 1 0 1 0

- 1 1 1 0

1 1 1 1 0 0

(2.13)Binary Arithmetic (continued)

Multiplication is simple–0 times anything is 0–1 times anything is that thing again

For example 1 0 1 1 0 0 1

x 1 0 0 1 0 1

1 0 1 1 0 0 1

0 0 0 0 0 0 0

1 0 1 1 0 0 1

0 0 0 0 0 0 0

0 0 0 0 0 0 0

1 0 1 1 0 0 1

1 1 0 0 1 1 0 1 1 1 0 1

(2.14)Binary Arithmetic (continued)

For division, the divisor is either– less than or equal to what it’s dividing into, so the quotient is 1

–greater than what it’s dividing into, so the quotient is 0

For example 1 0 1 1 1 0 quotient1 0 1 0 1 1 1 0 1 1 0 0 1 1 1 0 1 1 1 0 1 0 1 0 0 1 remainder

(2.15)Octal and Hexadecimal

Reading and writing binary numbers can be confusing, so we often use octal (base 8) or hexadecimal (base 16) numbers– group binary number into sets of 3 (octal)

or 4 (hex) bits, then replace each group by its corresponding digit from the tables

– to convert back to binary, just replace each octal or hex digit with its binary equivalent

binary 000 001 010 011 100 101 110 111octal 0 1 2 3 4 5 6 7

binary 0000 0001 0010 0011 0100 0101 0110 0111hex 0 1 2 3 4 5 6 7

binary 1000 1001 1010 1011 1100 1101 1110 1111hex 8 9 A B C D E F

(2.16)Real Numbers

Previous numeric values were all integers We commonly use real numbers (with

decimal point and fractional part) as well–24.125 = 2x101 + 4x100 + 1x10-1 + 2x10-2 + 5x10-3

Same idea holds for binary numbers–11000.001 = 1x24 + 1x23 + 0x22 + 0x21 + 0x20 + 0x2-1 + 0x2-2 + 1x2-3

Can also write these in scientific notation–0.24125 x 102

–0.11000001 x 25

Referred to as floating point numbers in “computer speak”

(2.17)Holding Binary Numbers in a Computer

Computer memory is organized into chunks of 8 bits, called bytes

The range of values that an integer can hold depends on how many bytes of memory are used–1 byte 0 - 255–2 bytes -32,768 - 32,767–4 bytes -2,147,483,648 - 2,147,483,647

Floating point numbers usually have 4 or 8 byte representations– separate exponent and magnitude

magnitude

magnitude

exp

exp

sign

0 1 7 8 31

63

(2.18)Representing Text

Text is an example of discrete information– like integers - there are only certain values that are allowed

Representing text in a computer is simply a matter of defining a correspondence between each character and a unique binary number– called a code–need different numbers for upper and lower case representation of same letter

–need representation for digits 0 - 9 as characters

–want A to be less than B so it’s possible to alphabetize character information

(2.19)Representing Text (continued)

American Standard Code for Information Interchange (ASCII) code is standard for most computers–7-bit code (128 possible characters)– stored in memory as single byte

Won’t represent non-Roman characters easily–new 16-bit UniCode will

(2.20)Representing Analog Information

If the data we want to represent in a computer is not discrete but continuous, need to turn it into a sequence of numerical values by sampling–examples are sound, pressures, images, video

– sequence of samples approximates original signal

(2.21)Representing Analog Information (continued)

Values used for the samples determine precision of measurement– too coarse a division of the range of possible input values yields a poor approximation

– too fine a division wastes storage space (since more bits needed for each sample)»8 bits, 256 levels; 16 bits, 65,536 levels

(2.22)Representing Analog Information (continued)

Number of samples in given time period is called the frequency or sample rate–defined by number of measurements per second (Hz)

– sample rate needed depends on how rapidly the input signal changes

(2.23)Representing Analog Information (continued)

Need to trade off sampling rate and precision to achieve acceptable approximation without letting resulting digital data get too large

Audio CD–44.1 KHz sampling rate–16 bit precision–1 minute of CD-quality stereo is almost 10.6 Mbytes

For images– resolution (number of samples in horizontal and vertical direction) takes role of sampling rate

–Precision is measured by number of bits per sample (samples are called pixels)

per channel

(2.24)Original – 1600 x 800 Pixels, 24 Bits per Pixel

(2.25)Lower Resolution – 300 x 150 Pixels, 24 Bit

(2.26)Lower Resolution – 150 x 75 Pixels, 24 Bit

(2.27)Lower Resolution – 50 x 25 Pixels, 24 Bit

(2.28)Lower Resolution – 25 x 12 Pixels, 24 Bit

(2.29)Base Image – 300 x 150, 24 Bit

(2.30)Lower Precision – 300 x 200 Pixels, 8 Bit

(2.31)Lower Precision – 300 x 200 Pixels, 4 Bits

(2.32)Lower Precision – 300 x 200 Pixels, 1 Bit

(2.33)Boolean Algebra

Developed in 1854 by English mathematician George Boole– logical algebra in which all quantities are either true or false

–fits well with binary representations (1 = true, 0 = false)

Foundation of all computer hardware design Three fundamental logical operations

A B not A A or B A and B0 0 1 0 00 1 1 1 01 0 0 1 01 1 0 1 1

example of a truth table

(2.34)Boolean Algebra (continued)

It’s important that the possible values for A and B are assigned so they cover all the possible combinations–assign methodically as shown on preceding slide

(2.35)Boolean Algebra (continued)

Two other logical operations (combinations of the fundamental ones) are important–not or (nor)–not and (nand)–any logic function that can be expressed using and, or, not can also be expressed using just one of nand, nor

A B A or B not (A orB)

A nor B A and B not (A andB)

A nand B

0 0 0 1 1 0 1 10 1 1 0 0 0 1 11 0 1 0 0 0 1 11 1 1 0 0 1 0 0

think of as or followed by not, or

and followed by not

(2.36)Logical Expressions

Can combine these logical operations just as we combine arithmetic expressions, to produce logical expressions–order of operations is not first, then and, then or–do equal precedence operations left to right– change order with parentheses

A B C B or C not C not C and (B or C) A and B A and B or(not C and (B or C)

0 0 0 0 1 0 0 00 0 1 1 0 0 0 00 1 0 1 1 1 0 10 1 1 1 0 0 0 01 0 0 0 1 0 0 01 0 1 1 0 0 0 01 1 0 1 1 1 1 11 1 1 1 0 0 1 1

(2.37)Implementing Logical Expressions

To convert the logical expression to a circuit that calculates the equivalent logical value, simply provide a circuit for each of the terms of the logical expression

A

B

C

and or not

(2.38)Implementing Logical Expressions (continued)

Of course, it’s not really as simple as this– there may be many possible logical expressions that produce the same output of 0s and 1s

– the hardware designer must choose the optimal one based on one or more criteria»minimum number of logic functions» fewest different types of logic functions» fewest levels of logic functions between

inputs and outputs

(2.39)Remembering the Past

The previous logic circuit is an example of a combinational circuit– the output at any given time depends solely on the current values of the input

Another kind of logic circuit is a sequential circuit– the output at any given time depends on the current values of the input and the current value of the output