Post on 28-Apr-2015
description
transcript
FF 3.1
CHAPTER 3Hinges and Flap Fittings
FF 3.2
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.3
3
Duomatic Concealed Hinges
Premium - Smuso gentle closing
3.16
3.15
3.23
3.32
3.9
3.18
3.13
3.11
3.21
3.30
3.20
3.25
3.29
Opening angle 105°
Opening angle 110°
Opening angle 155°
Push System
Opening angle 165°
For sliding on (A)
Opening angle 110°, blind corner
Standard
Mounting plates
Opening angle 110°
Opening angle 150°, corner unit
Opening angle 110°
For quick fixing (SM)
Door catches and locking parts
Opening angle 110°, glass door
Magnetic catches
Metallamat A, Metalla A Concealed hinges
Metalla mini
3.53
3.36
3.52
3.44
3.46
3.56
3.38
3.48
3.57
3.39
Opening angle 110°
Mounting plate, sliding on (A)
Opening angle 95°
Metalla A
Metallamat A
Mounting plate, sliding on (A)
Clip-on hinge for quick fixing
Opening angle 110°
Econo mini
Opening angle 175°
Stainless
Opening angle 92°
Hinges and Flap FittingsTable of Contents
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.4
3
Furniture hinges
3.72
3.69
3.68
3.77
3.70
3.78
Butt hinges
Hinges for concealed fixing
Piano hinges
Mitred hinges
Pivot hinges
Glass door hinges
Aximat Concealed Hinges with exposed axle
Drilling and Insertion Machines
Hinges and Furniture hinges
Aximat 100
Futura 100
Futura 200
Futura 300
3.64
3.58
3.60
3.62
Hinges and Flap FittingsTable of Contents
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.5
3
Flap Fittings
Double flap lift up fitting
3.87
3.85
3.88
3.92
3.81
3.82
3.95
3.89
3.93
3.90
Senso for two-piece flaps
Maxi Swing soft for one-piece flaps
Strato for one-piece flaps
Electric Senso for two-piece flaps
Verso for one-piece flaps
Electric Strato for one-piece flaps
Stay flap fitting
Fold for two-piece flaps
Electric Verso for one-piece flaps
Free two-piece flaps
Maxi for one-piece flaps
Swing up front fitting
Parallel lift up front fitting
Soft closing system - Smuso gentle closing system
3.116Soft closing mechanism for doors
3.96
3.106
3.102
3.114
3.105
3.98
3.108
3.100
3.112
Maxi for one-piece flaps
without adjustable breaking effect
Maxi Touch for one-piece flaps
with adjustable breaking effect
Maxi for one-piece flaps with handle
Duo/Duo Forte
Flap hinges with MINIFIX connection
Maxi chest fitting for wooden lids
Flap hinges
Lid stays
Flap stays
Hinges and Flap FittingsTable of Contents
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.6
3
+1 +22500
500
6004-9 9-12 12-18 17-22
600 600 600
1500
1000
2000
0 10 20 30
Door weight kgDoor width mm
Door Height
Number of hinges kg
2 3 4 5
Duomatic Premium StandardPush
Integrated soft close
Soft close as accessory
Tip-on door opening
Mounting plate with quick fixing system (SM)
Mounting plate with slide-on system (A)
On the following pages you will find the model series:
Advantages:• Easy and efficient processing• Variable three-dimensional adjusting facility with appropriate mounting plate• One hinge – two systems (slide-on and quick fixing), deter-mined by the mounting plate• Soft close integrated in cup (no visible soft close mechanism on hinge arm)
Number of concealed hinges per door The values in the table are sample measurements. Trial mounting is recommended.
The number of concealed hinges per door depends on:• Door width and height• Door weight• Door material
Side adjustment
Side adjustment of door with Duomatic con-cealed hingesA special adjusting facility allows the door to be adjusted laterally, whereas the value of 0.7 mm remains unchanged.The adjusting screw produces the lateral travel of the hinge arm from –1.5 mm up to +4.5 mm.This value is reduced to –0,5 mm with double profile door hinges.
According to the example diagram, three concealed hinges have to be fitted with a door height of 1,500 mm and a door weight of 9 – 12 kg.
The load bearing capacity can be increased by 3 kg by fitting 1 additional concealed hinge; see blue line. Fitting 2 additional con-cealed hinges increases the load bearing capacity to 6 kg; See yellow line.
InformationDuomatic Concealed Hinges
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.7
3
InformationDuomatic Concealed Hinges
Side adjustment
Depth adjustment of door with Duomatic Amounting plates with slide on systemThe door can be adjusted frontally up to +2.8 mm.The slot on the metal bottom plate allows the hingeto be adjusted. The screw must be retightened after adjustment.
Depth adjustment with Duomatic SM cruciform mounting plate with quick fixing systemThe depth of the door can be adjusted from –0.5 mm to +2.8 mm viaeccentric using Duomatic mounting plates with quick fixing system. It is not necessary to loosen other screws.
Depth adjustment with Duomatic SM straight and cruci-form mounting plate with quick fixing systemThe depth of the door can be adjusted from –0.5 mm to +2.8 mm viaeccentric using Duomatic mounting plates with quick fixing system. It is not necessary to loosen other screws.
Height adjustment
Height adjustment of door using Duomatic mounting plates with slide on and quick fixing systemThe height of the door can be adjusted frontally by ±2 mm by loosening the two fixing screws.The slots allow the mounting plate to glide in both directions. The screws must be retightened after adjustment.
Height adjustment of door using Duomatic cruciform mounting plates with quick fixing systemDoor height can be adjusted by ±2 mm via eccentric. It is not necessary to loosen other screws.
Height adjustment of door using Duomatic straight mounting plates with quick fixing systemDoor height can be adjusted by ±2 mm via eccentric. It is not necessary to loosen other screws.
!
"
§
!
"
§
0.7
+2-2
! !
"
"
§§
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.8
3
InformationDuomatic Concealed hingesNew products and systemsNew products and systems
Full overlay mounting Half overlay mounting/twin mounting Inset mounting
A Hinge arm lengthB Hinge arm heightC Door offset
D Distance (mounting plate) E Distance to cup F Gap
G Door overlayJ Material thickness
Duomatic concealed hinges Duomatic for profile doors
For screw fixing Without tools
Drilling pattern 45/9.5
Drilling pattern 48/6
Drilling pattern 52/5.5
Drilling pattern 45/9.5
Drilling pattern 48/6
Drilling pattern 52/5.5
Determine type of mounting and gap (F)
Calculate door overlay (G) See distance to cup (E) and distance
Door overlay mm
9 10 11 12 13 14 15 16 17 18
3 0
3 4 5 6 3
3 4 5 6 7 8 6
3 4 5 6 7 8 9
Distance to cup E mm Mounting plate distance mm
Dimensional data not binding. We reserve the right to alter speci�cations without notice.
Construction dimensions
Cup dimensions
Drilling pattern for Duomatic cup fixing
Calculation examples: Mounting plate (distance)
Choice of mounting plateThe different distance heights of the mounting plates allow adjustments to be made to the door overlay.The starting point for determining the required distance is the desired type of mounting with a defined door overlay.
e.g. full overlay mountingwith gap (F) 5 mm
Door overlay (G) =wood thickness (J) – gap (F)e.g. 20 – 5 = 15 mm
In the example the door overlay is defined at 15 mm. This produces distances to the cup of 3 and 6 mm. If distance to cup (E) of 6 mm is chosen, it equals a mounting plate height (distance) of 6 mm.
InformationDuomatic Concealed Hinges
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.9
3
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
Door thickness mm
Distance to cup E mm
3,0 4,0 5,0 6,0
15 1.0 0.9 0.9 0.9
16 1.0 1.0 1.0 1.0
17 1.2 1.2 1.1 1.1
18 1.4 1.3 1.2 1.2
19 1.6 1.5 1.5 1.4
20 1.9 1.8 1.8 1.7
Duomatic PremiumWith integrated soft close
Opening angle 105°
• Material: Steel cup and hinge arm• Finish: Nickel plated
• Installation: Door to cabinet with quick fixing or slide-on key • Drilling depth: Hinge cup 12.0 mm
• Adjustment facility: Variable side adjustment from -1.5 mm to +4.5 mm height adjustment from -2 mm to +2 mm, depth adjustment, with Duomatic A mounting plates +3.0 mm, • With automatic closing spring• With soft close mechanism integrated in hinge cup
Note
calculated:Dimensions and gap specifications in drawings and tables are
• Using factory settings• For mounting plate distance 0 mm• For door offset with max. opening angle
• Hinge arm: Straight
Minimum distance between door and side panel
Minimum gap
Full overlay mounting and mounting plate
Rounding off the edge of door reduces the given values.
Full overlay mounting
0
Distance to cup E mm Mounting plate distance mm
9 10 11 12 13 14 15 16 17 18 19 20 21
3 4 5 6
3 4 5 6 3
6
9
Door Overlay mm
3 4 5 6
3 4 5 6
Drilling pattern
45/9.5 48/6
Press fitting
Door thickness mm
Distance to cup E mm
3,0 4,0 5,0 6,0
15 0.0 0.4 1.0 1.6
16 0.0 0.6 1.0 1.8
17 0.0 0.7 1.2 2.0
18 0.0 0.9 1.8 2.1
19 0.1 1.1 2.0 2.3
20 0.3 1.2 2.0 2.5
Packing: 1 piece
→
• Cup fixing:
329.91.400
329.91.410
329.91.700
329.91.710
Drilling pattern
45/9.5 48/6
Press fitting
Packing: 1 piece
329.92.400
329.92.410
329.92.700
329.92.710
Quick fixing
Key hole
system using Duomatic A mounting plates.
For screw fixing or press-in dowel
Minimum distance
Minimum gap
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.10
3
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
• Hinge arm: Cranked
Half overlay mounting
Drilling pattern
45/9.5 48/6
Press fitting
Packing: 1 piece
329.91.402
329.91.412
329.91.702
329.91.712
Door Overlay mm
Distance to cup E mm Mounting plate distance mm
0 1 2 3 4 5 6 7 8 9 10 11 12
3 4 5 6
3 4 5 6
3 4 5 6
3 4 5 6
0
3
6
9
Quick fixing
Key hole
Drilling pattern
45/9.5 48/6
Press fitting
Packing: 1 piece
329.92.402
329.92.412
329.92.702
329.92.712
Door Overlay mm
-8 -7 -6 -5 -4 -3 -2 -1 0 0
3
6
9
3 4 5
3 4 5 6
3 4 5 6Distance to cup E mm Mounting plate distance mm
• Hinge arm: High Cranked
Inset mounting
Drilling pattern
45/9.5 48/6
Press fitting
Packing: 1 piece
329.91.403
329.91.413
329.91.703
329.91.713
Quick fixing
Key hole
Drilling pattern
45/9.5 48/6
Press fitting
Packing: 1 piece
329.92.403
329.92.413
329.92.703
329.92.713
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.11
3
Door thickness mm
Distance to cup E mm
3,0 4,0 5,0 6,0
18 0,9 0,9 0,9 0,9
19 1,2 1,2 1,2 1,2
20 1,5 1,5 1,5 1,5
21 1,8 1,8 1,8 1,8
22 2,4 2,1 2,1 2,1
23 3,7 2,7 2,6 2,5
24 5,1 4,1 3,1 3,0
25 6,5 5,5 4,1 3,5
26 7,8 6,8 5,4 4,4
Duomatic PremiumWith integrated soft close
→ Opening angle 110°
• Material: Steel cup and hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing with or without tools• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Drilling depth: Hinge cup 13.5 mm• Adjustment facility: Variable side adjustment from -1.5 mm to +4.5 mm height adjustment from -2 mm to +2 mm, depth adjustment, with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm• With automatic closing spring• With soft close mechanism integrated in hinge cup
NoteDimensions and gap specifications in drawings and tables are calculated:• Using factory settings• For mounting plate distance 0 mm• For door offset with max. opening angle
• Hinge arm: Straight
Premium, a stylish concealed hinge withintegrated soft close in the hinge cup.The soft close mechanism is not visible when installed. Note drilling depth for hinge cup 13.5 mm.
Minimum distance between door and side panel
Minimum gap
Rounding off the edge of door reduces the given values.
Full overlay mounting with mounting plate
Rounding off the edge of door reduces the given values.
Full overlay mounting
Minimumdistance
0
Hinge Arm: Straight
Distance to cup E mm Mounting plate distance mm
9 10 11 12 13 14 15 16 17 18 19 20 21
3 4 5 6
3 4 5 6 3
6
9
Door Overlay mm
3 4 5 6
3 4 5 6
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing 329.17.400 329.17.700 329.17.740
Without tools 329.17.430 329.17.730 329.17.770
Door thickness mm
Distance to cup E mm
3,0 4,0 5,0 6,0
18 0,0 0,3 1,6 2,5
19 0,0 0,6 1,8 2,8
20 0,2 0,9 2,1 3,1
21 0,5 1,2 2,3 3,3
22 0,8 1,4 2,6 3,6
23 1,1 1,7 2,9 3,8
24 1,4 2,0 3,1 4,1
25 1,7 2,3 3,4 4,3
26 1,9 2,6 3,6 4,6
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
Packing: 50 pieces
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.12
3
Half overlay mounting/twin mounting Inset mounting
Hinge Arm: Cranked
Door Overlay mm
Distance to cup E mm Mounting plate distance mm
0 1 2 3 4 5 6 7 8 9 10 11 12
3 4 5 6
3 4 5 6
3 4 5 6
3 4 5 6
0
3
6
9
Hinge Arm: High Cranked
Door Overlay mm
-8 -7 -6 -5 -4 -3 -2 -1 0 0
3
6
9
3 4 5
3 4 5 6
3 4 5 6Distance to cup E mm Mounting plate distance mm
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.17.403 329.17.703 329.17.743
Without tools 329.17.433 329.17.733 329.17.773
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.17.402 329.17.702 329.17.742
Without tools 329.17.432 329.17.732 329.17.772
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
Packing: 50 pieces Packing: 50 pieces
• Hinge arm: Cranked • Hinge arm: High cranked
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.13
3
Duomatic PremiumWith integrated soft close, for cabinets with extending compart-ments and shelves
→ Opening angle 155°
• Material: Zinc alloy cup, steel hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Drilling depth: Hinge cup 13.5 mm• Adjustment facility: Variable side adjustment from -1.5 mm to +4.5 mm height adjustment from -2 mm to +2 mm, depth adjustment, with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm• With automatic closing spring• With soft close mechanism integrated in hinge cup
Premium, a stylish concealed hinge withintegrated soft close in the hinge cup.The soft close mechanism is not visible when installed. Note drilling depth for hinge cup 13.5 mm.
Note
Dimensions and gap specification in drawings and tables arecalculated: Factory Settings For mounting plate distance 0 mm For door offset with max. opening angle
Minimum gap
Rounding off the edge of door reduces the given values
Outer dimensions and distances
When using a hinge with anopening angle of 90°, with astraight hinge arm and a mounting plate with distance0 mm, the door swings out laterally 2 mm when opened.
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
Door thickness mm
Distance to cup E mm
18 0,0 0,0 0,0 0,0 0,0 0,0
19 0,0 0,0 0,0 0,0 0,0 0,0
20 0,0 0,4 0,1 0,1 0,1 0,0
21 0,3 0,4 0,5 1,2 0,7 0,6
22 1,2 1,3 1,6 3,0 2,5 1,9
3,0 4,0 5,0 6,0 7,0 8,0
Minimum Gap
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.14
3
Full overlay mounting Half overlay mounting/twin mounting
E
Door overlay mm
Distance to cup E mm Mounting plate distance mm
-1 0 1 2 3 4 5 6 7 8 9 10 11 12 13
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
6
9
3
0
Hinge Arm: Cranked
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.29.200 329.29.300 329.29.340
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.29.202 329.29.302 329.29.342
Door overlay mm
Distance to cup E mm Mounting plate distance mm
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
6
9
3
0
Hinge Arm: Straight
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.15
3
For standard blind corners
95
17
3
3
Duomatic PremiumWith integrated soft close
→ For blind corner applications,opening angle 110°
Full overlay mounting with mounting plate • Opening angle: 110°
Order referenceSuitable for all Duomatic A and Duomatic SM mounting plates
Mounting plate distance 0 mm Mounting plate distance 3 mm
Mounting plate distance 6 mm
X max:For Duomatic A = 61 mmFor Duomatic SM = 70 mmFor Duomatic SM withrear eccentric = 74 mm
• Material: Steel cup, zinc alloy hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing, for press fitting, for push fitting or without tools• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Drilling depth: Hinge cup 13.5 mm• Distance to cup: 3 – 6 mm• Adjustment facility: Variable side adjustment up to +4.5 mm height adjustment from -2 mm to +2 mm, depth adjustment, with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm• With automatic closing spring• With soft close mechanism integrated in hinge cup
Cup fixing Cat. No.
For screw fixing 329.11.700
Duomatic Concealed HingesFor wooden doors – Smuso gentle closing
Premium, a stylish concealed hinge withintegrated soft close in the hinge cup.The soft close mechanism is not visible when installed. Note drilling depth for hinge cup 13.5 mm.
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.16
3
Duomatic Push
→ Opening angle 110°
• Material: Steel cup and hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing or press fitting• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Adjustment facility: Variable side adjustment from –1.5 mm to +4.5 mm height adjustment from –2 mm to +2 mm, depth adjustment with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm
• Area of application: Mechanical opening aid for furniture doors and for holding the doors in closed position, suitable for wooden doors without handles• Function: The spring force of the hinges opens the door by tapping on it. The locking parts that are screwed to or mounted in a drilled hole in the inner side of the door keep the closed door in position.
NoteDimensions and gap specifications in drawings and tables are calculated:• Using factory settings• For mounting plate distance 0 mm• For door offset with max. opening angle
Full overlay mounting with mounting plate
Cup dimensions
Press fitting Minimum gap
Minimum gap
Minimum distance
Drilling dimensions for cupfixing, screw fixing
Minimum distance betweendoor and side panel
Duomatic PushDoor opening system
Duomatic Concealed HingesFor wooden doors – for tip-on door opening
Function
Push door opening system consists of:• Push concealed hinge• Mounting plate• Push door catch• Locking part for door catch
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.17
3
Full overlay mounting
Half overlay mounting
Inset mounting
Rounding off the edge of door reduces the given values.
Door thick-ness mm
Distance to cup mm
3.0 4.0 5.0 6.0
16 0.5 0.5 0.5 0.5
17 0.7 0.7 0.7 0.7
18 0.9 0.9 0.9 0.9
19 1.2 1.2 1.2 1.2
20 1.5 1.5 1.5 1.5
21 1.8 1.8 1.8 1.8
22 2.4 2.1 2.1 2.1
23 3.7 2.7 2.6 2.5
24 5.1 4.1 3.1 3.0
25 6.5 5.5 4.1 3.5
26 7.8 6.8 5.4 4.4
Minimumgap
Duomatic Concealed HingesFor wooden doors – for tip-on door opening
Minimum gap
Minimum distance between door and side panel
Rounding off the edge of door reduces the given values.
Door thick-ness mm
Distance to cup mm
3.0 4.0 5.0 6.0
16 0.0 0.0 1.1 2.0
17 0.0 0.0 1.3 2.3
18 0.0 0.3 1.6 2.5
19 0.0 0.6 1.8 2.8
20 0.2 0.9 2.1 3.1
21 0.5 1.2 2.3 3.3
22 0.8 1.4 2.6 3.6
23 1.1 1.7 2.9 3.8
24 1.4 2.0 3.1 4.1
25 1.7 2.3 3.4 4.3
26 1.9 2.6 3.6 4.6
Minimum distance
• Hinge arm: Straight
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
9 10 11 12 13 14 15 16 17 18 19 20 213 4 5 6
3 4 5 63 4 5 6
3 4 5 6
• Hinge arm: Cranked
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
3 4 5 6 3 4 5 6
3 4 5 6
3 4 5 6
0 1 2 3 4 5 6 7 8 9 10 11 12
• Hinge arm: High cranked
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
-8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4
3 4 5 6
3 4 5 6
3 4 5
Cup fixing Cat. No.
Screw fixing 329.17.900
Press fitting 329.17.910
Cup fixing Cat. No.
Screw fixing 329.17.902
Press fitting 329.17.912
Cup fixing Cat. No.
Screw fixing 329.17.903
Press fitting 329.17.913
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.18
3
Cat. No.
With positioning aid 329.44.500
Without positioning aid 329.44.501
Cat. No.
With positioning aid 329.44.520
Cat. No.
Single door catch 329.44.571
For glue fixingPush Door Catches and Locking Parts→ Door catch
• Material: Plastic• Color: Grey• Mounting: Cabinet, top or base panel• Installation: For screw fixing or glue fixing
• Material: Plastic• Color: Grey• Mounting: Cabinet, top or base panel• Adjusting facility: Depth adjustment: –1 to +2.5 mm via knurled adapter, side adjustment ±2 mm via slot in adapter
With positioning aid
Installation1. The surface where the catch is going to be installed has to be cleaned and de greased using cleaning agents containing acetone.2. Remove protective foil from double-sided adhesive tape.3. Fix catch and press on firmly for approximately 1 minute.4. Do not use the catch constantly for the first 12 hours.
Supplied with1 Door catch2 Lateral trim caps
For screw fixing
Supplied with:
With positioning aid Without positioning aid
1 Door catch2 Lateral trim capsFixing screws
Installation:
Installation referenceThe use of 2 Push door catches is recommended for doors that aremore than 1,600 mm in height.
Single Door Catch
Installation
D = door overlay, Y= min. 8.5 mm
→ Door catch with housing
Duomatic Concealed HingesFor wooden doors – for tip-on door opening
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.19
3
Double door catch
For screw fixing,For inset doors
For press fitting, For overlay doors
Installation
D = door overlay
Cat. No.
Double door catch 329.44.591
Cat. No.
Grey 329.44.532
Color Cat. No.
With positioning aid
Grey 329.44.530
Without positioning aid
Grey 329.44.531
Locking part for door catch
Installation:Locking part
With positioning aid Without positioning aid
Installation:Locking part
Duomatic Concealed HingesFor wooden doors – for tip-on door opening
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.20
3
Push Magnetic Door Catch
For mounting in drilled hole
Cruciform adapter housing for screw fixing
With counterplate for knocking inWith counterplate for glue fixing
With positioning aid
Without positioning aid
Installation Cat. No.
Counterplate for knocking in 356.06.401
Counterplate for glue fixing 356.06.402
Installation Cat. No.
With positioning aid 356.06.410
Without positioning aid 356.06.420
• Version: With magnet for holding in closed position• Material: Plastic• Color: Beige• Mounting: For mounting in drilled hole in the cabinet top or bottom
• Material: Plastic• Color: Beige• Mounting: For screw fixing to cabinet top or bottom
Duomatic Accessories for ConcealedHinges→ Drill bit without drill point
Test stamp
Diametermm
Cat. No.
35.0 001.97.507
Cat. No.
Test stamp for drill hole 13.5 mm 329.24.990
• Area of Recommended for Duomatic concealed hinges, Application: for all drilling and insertion machines, for drill holes close to the bottom cover layer, without contouring the outer decor surfaces• Total length: 57 mm
• Material: Plastic• Color: White• Area of application: For re measuring the depth of the cup drilling for Duomatic Premium concealed hinges
Duomatic Concealed HingesFor wooden doors
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.21
3
Duomatic Standard
→ Opening angle 110°
Minimum distance between door and side panel
Rounding off the edge of door reduces the given values.
Door thick-ness mm
Distance to cup E mm
3.0 4.0 5.0 6.0
16 0.0 0.0 1.1 2.0
17 0.0 0.0 1.3 2.3
18 0.0 0.3 1.6 2.5
19 0.0 0.6 1.8 2.8
20 0.2 0.9 2.1 3.1
21 0.5 1.2 2.3 3.3
22 0.8 1.4 2.6 3.6
23 1.1 1.7 2.9 3.8
24 1.4 2.0 3.1 4.1
25 1.7 2.3 3.4 4.3
26 1.9 2.6 3.6 4.6
Minimumdistance
Minimum gap
Rounding off the edge of door reduces the given values.
Door thick-ness mm
Distance to cup E mm
3.0 4.0 5.0 6.0
16 0.5 0.5 0.5 0.5
17 0.7 0.7 0.7 0.7
18 0.9 0.9 0.9 0.9
19 1.2 1.2 1.2 1.2
20 1.5 1.5 1.5 1.5
21 1.8 1.8 1.8 1.8
22 2.4 2.1 2.1 2.1
23 3.7 2.7 2.6 2.5
24 5.1 4.1 3.1 3.0
25 6.5 5.5 4.1 3.5
26 7.8 6.8 5.4 4.4
Minimumgap
• Material: Steel cup and hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing, for press fitting, for push fitting or without tools• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Adjustment facility: Side adjustment continuously from –1.5 mm to +4.5 mm, height adjustment from –2 mm to +2 mm, depth adjustment with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm• With automatic closing spring
Duomatic Concealed HingesFor wooden doors
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.22
3
Full overlay mounting
Half overlay mounting/twin mounting
Inset mounting
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
9 10 11 12 13 14 15 16 17 18 19 20 213 4 5 6
3 4 5 63 4 5 6
3 4 5 6
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.17.507 329.17.600 329.17.640
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.17.520 329.17.603 329.17.643
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.17.516 329.17.602 329.17.642
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
3 4 5 6 3 4 5 6
3 4 5 6
3 4 5 6
0 1 2 3 4 5 6 7 8 9 10 11 12
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
-8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4
3 4 5 6
3 4 5 6
3 4 5
Duomatic Concealed HingesFor wooden doors
Packing: 1 piecePacking: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.23
3
Duomatic StandardFor cabinets with pull-out components and shelves
Minimum gap
Rounding off the edge of door reduces the given values.
Door thickness mm
Distance to cup E mm
3.0 4.0 5.0 6.0 7.0 8.0
16 0.0 0.0 0.0 0.0 0.0 0.0
18 0.0 0.0 0.0 0.0 0.0 0.0
20 0.0 0.0 0.0 0.0 0.0 0.0
22 0.7 0.1 0.1 0.1 0.1 0.1
24 2.7 1.8 1.2 0.9 0.7 0.6
26 4.6 3.8 3.0 2.5 2.0 1.7
28 7.9 6.9 5.9 4.9 3.9 3.2
Minimumgap
Outer dimensions and distances
The door swings out laterally up to 5.5 mm when opened. Distance with hinge with straight arm, mounting plate height 0 mm and distance to cup 3 mm
4
28
0
24
1
• Material: Zinc alloy cup, steel hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Drilling depth: Hinge cup 11 mm• Adjustment facility: Variable side adjustment from –1.5 mm to +4.5 mm, height adjustment from –2 mm to +2 mm, depth adjustment with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm• With automatic closing spring
NoteDimensions and gap specifications in drawings and tables are calculated:• Using factory settings• For mounting plate distance 0 mm• For door offset with max. opening angle
Duomatic Concealed HingesFor wooden doors
Full overlay mounting with mounting plate
→ Opening angle 165°
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.24
3
Duomatic Concealed HingesFor wooden doors
Door overlay mm
Distance to cup E mm Mounting plate distance mm
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
6
9
3
0
Full overlay mounting Inset mounting
Half overlay mounting/twin mounting
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.07.609 329.07.700 329.07.740
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.07.620 329.07.703 329.07.743
Cup fixing Drilling pattern
45/9.5 48/6 52/5.5
For screw fixing
329.07.618 329.07.702 329.07.742
Door overlay mm
Distance to cup E mm Mounting plate distance mm
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5 6 7 8
6
9
3
0
Door overlay mm
0
3
6
9
Distance to cup E mm Mounting plate distance mm
-8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5 6
3 4 5 6 7 8
3 4 5 6 7 8
3 4 5
Packing: 1 piece
Packing: 1 piece Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.25
3
Duomatic Concealed HingesFor wooden doors
Corner Unit Folding Door Hinge
→ Opening angle 150°, gap 4-18 mm
• Material: Zinc alloy cup and hinge arm• Finish: Nickel plated• For door thickness:15-24 mm• Adjusting facility: Three-dimensional• Installation: Screw fixing
Adjusting facility
Cup fixing Cat. No.
Screw fixing 343.90.700
Drilling dimensions for cup
Installation
Door closed
Door open
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.26
3
Duomatic Concealed HingesFor wooden doors
Minimum distance between door and side panel
Duomatic StandardFor profile doors up to 40 mm
Minimum distance between door and side panel
Minimum gap
Drilling pattern for cup fixing
Rounding off the edge of door reduces the given values.
For screw fixing
Distance to cup E mm
3 – 11 12 13 14 15
0.0 0.4 1.2 2.2 3.2
7.540
3–15
13
Door thickness mm
Distance to cup E mm
3 4 5 6 7 8 9 10 11 12 13 14 15
20 0,4 0,4 0,4 0,4 0,4 0,4 0,4 0,3 0,3 0,3 0,3 0,3 0,3
21 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,4 0,4 0,4 0,4 0,4
22 0,7 0,7 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,6 0,5 0,5 0,5
23 0,8 0,8 0,8 0,8 0,8 0,8 0,7 0,7 0,7 0,7 0,7 0,7 0,7
24 1,0 1,0 1,0 0,9 0,9 0,9 0,9 0,9 0,9 0,9 0,9 0,8 0,8
25 1,2 1,2 1,2 1,1 1,1 1,1 1,1 1,1 1,0 1,0 1,0 1,0 1,0
26 1,4 1,4 1,4 1,3 1,3 1,3 1,3 1,3 1,2 1,2 1,2 1,2 1,2
27 1,6 1,6 1,6 1,6 1,5 1,5 1,5 1,5 1,4 1,4 1,4 1,4 1,4
28 1,9 1,9 1,8 1,8 1,8 1,7 1,7 1,7 1,7 1,6 1,6 1,6 1,6
29 2,2 2,1 2,1 2,1 2,0 2,0 2,0 1,9 1,9 1,9 1,8 1,8 1,8
30 2,5 2,4 2,4 2,3 2,3 2,2 2,2 2,2 2,1 2,1 2,1 2,0 2,0
31 2,8 2,7 2,7 2,6 2,6 2,5 2,5 2,4 2,4 2,4 2,3 2,3 2,3
32 3,1 3,0 3,0 2,9 2,9 2,8 2,8 2,7 2,7 2,6 2,6 2,6 2,6
33 3,5 3,4 3,3 3,3 3,2 3,1 3,1 3,0 3,0 2,9 2,9 2,8 2,8
34 4,1 3,8 3,7 3,6 3,6 3,5 3,4 3,4 3,3 3,3 3,2 3,2 3,2
35 5,0 4,4 4,1 4,0 3,9 3,8 3,8 3,7 3,6 3,6 3,5 3,5 3,5
36 6,0 5,3 4,8 4,4 4,3 4,2 4,2 4,1 4,0 3,9 3,8 3,8 3,8
37 6,9 6,3 5,7 5,2 4,8 4,7 4,6 4,5 4,4 4,3 4,2 4,2 4,2
38 7,8 7,2 6,6 6,0 5,5 5,1 5,0 4,9 4,8 4,7 4,5 4,5 4,5
39 8,8 8,1 7,5 6,9 6,4 5,9 5,5 5,4 5,2 5,1 4,9 4,9 4,9
40 9,7 9,0 8,4 7,8 7,3 6,8 6,3 6,0 5,7 5,6 5,4 5,4 5,4
• Material: Steel cup, zinc alloy hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• Installation: Door to cabinet with slide-on system using Duomatic A mounting plates or with quick fixing system using Duomatic SM mounting plates• Drilling depth: Hinge cup 13 mm• Adjustment facility: Variable side adjustment from –0.5 to +5.5 mm, height adjustment from –2 to +2 mm, depth adjustment, with Duomatic A mounting plates +2.8 mm, with Duomatic SM quick fixing mounting plates from –0.5 mm to +2.8 mm• With automatic closing spring
→ Opening angle 94°
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.27
3
Full overlay mounting
Half overlay mounting/twin mounting
Inset mounting
Door overlay mm
18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
0
3
Distance to cup E mm Mounting plate distance mm
Door overlay mm
12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
6
9
Distance to cup E mm Mounting plate distance mm
3 4 5 6 7 8 9 10 11 12 13 14 15
3 4 5 6 7 8 9 10 11 12 13 14 15
3 4 5 6 7 8 9 10 11 12 13 14 15
3 4 5 6 7 8 9 10 11 12 13 14 15
Cup fixing Drilling pattern
52/7.5
For screw fixing 329.05.605
Cup fixing Drilling pattern
52/7.5
For screw fixing 329.05.614
Cup fixing Drilling pattern
52/7.5
For screw fixing 329.05.632
Door overlay mm
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
0
3
Distance to cup E mm Mounting plate distance mm
Door overlay mm
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
6
9
Distance to cup E mm Mounting plate distance mm
3 4 5 6 7 8 9 10 11 12 13 14 15
3 4 5 6 7 8 9 10 11 12 13 14 15
3 4 5 6 7 8 9 10 11 12 13 14 15
3 4 5 6 7 8 9 10 11 12 13 14 15
Door overlay mm
-3 -2 -1 0
3 0
3 4 5 6 3
Distance to cup E mm Mounting plate distance mm
Door overlay mm
-9 -8 -7 -6 -5 -4 -3 -2 -1 0
6
9
Distance to cup E mm Mounting plate distance mm
3 4 5 6 7 8 9 10 11 12
3 4 5 6 7 8 9
Duomatic Concealed HingesFor wooden doors
Packing: 1 piece
Packing: 1 piece Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.28
3
Concealed hinge 329.05.632
Concealed hinge 329.05.632
Concealed hinge 329.05.632
Concealed hinge 329.05.632
Concealed hinge 329.05.632
Concealed hinge 329.05.632
Concealed hinge 329.05.605
Concealed hinge 329.05.614
Concealed hinge 329.05.605
Concealed hinge 329.05.614
Concealed hinge 329.05.632
InformationDuomatic Concealed Hinges
Application examples for profile door with concealed hinge for screw fixing,suitable for all Duomatic A and Duomatic SM mounting plates with quick fix system
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.29
3
Duomatic StandardFor glass and mirror doors
→ Opening angle 110°
Outer dimensions
Hinge arm: straightCup fixing: 44.0 x 25.5 mm (L x W), corner diameter 3mm
Calculation of distance mounting plateD =-1 + TAB - (A)
Gap
Installation Reference:1.) Attach plate to the glass or mirror doorwith a special adhesive
2.) To mount hinge, position cup on plateand then turn eccentric.
• Material: Zinc alloy cup, steel hinge arm• Finish: Nickel plated• Cup plate: For gluing to the door (no glass drilling required)• Fixing door Sliding on with Duomatic A mounting plates or to carcase: quick fixing with Duomatic SM mounting plates• Adjustment facility: Lateral adjustment continuously from -1.5 mm to +4.5 mm height adjustment from -2 mm to +2 mm, depth adjustment, with Duomatic A mounting plates +2.8 mm, with Duomatic SM mounting plates from -0.5 mm to +2.8 mm• With automatic closing spring
Cup fixing Cat. No.
Glue fixing 329.43.500
Full overlay mounting
Duomatic Concealed HingesFor glass and mirror doors
Full overlay mounting with mounting plate
Hinge particularly suitable for glass and mirror doors.For glue fixing to door.Fittings for all-glass constructions can be found in product group 13.
• Hinge arm: Straight• Cup fixing: 44.0 mm x 25.5 mm (L x W), 3 mm corner radius
Door overlay mm
6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 0
10 11 12 13 14 15 16 17 18 19 20 21 22 3
13 14 15 16 17 18 19 20 21 22 6
16 17 18 19 20 21 22 9
Distance to cup mm Mounting plate distance mm
Door overlay mm
0
3
6
9
Distance to cup mm Mounting plate distance mm
-10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2 3 4 5
0 1 2 3 4 5 6
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9 10 11 12
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.30
3Distance D mm Cat. No.
0 329.67.040
3 329.67.043
6 329.67.046
Distance Dmm
Drilling Depthmm
Cat. No.
For side panel thickness 19 mm
0 11.5 329.67.000
3 329.67.003
6 329.67.006
For side panel thickness 16 mm
0 7.5 329.67.050
3 329.67.053
6 329.67.056
Distance Dmm
Drilling Depthmm
Cat. No.
Dowel length 11 mm
0 11.5 329.67.010
3 329.67.013
6 329.67.016
• Material: Zinc alloy• Color: Nickel plated• Adjustment facility: Depth and height adjustment via eccentric
Duomatic SM Mounting PlatesWith quick fixing system
Duomatic Concealed HingesFor quick fixing (SM)
For screw fixingWith chipboard screws
For screw fixingWith pre–mounted special screws
→ For screw fixingWith pre–mounted special screws and spreading dowels
32 21
5
D
3221
32 21
5
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.31
3Distance D mm Cat. No.
0 329.73.500
2 329.73.502
3 329.73.503
4 329.73.504
6 329.73.506
Distance Dmm
Drilling Depthmm
Cat. No.
For side panel thickness 19 mm
0 11.0 329.73.510
2 329.73.512
3 329.73.513
4 329.73.514
6 329.73.516
For side panel thickness 16 mm
0 7.5 329.73.520
2 329.73.522
3 329.73.523
4 329.73.524
6 329.73.526
Distance Dmm
Drilling Depthmm
Cat. No.
For side panel thickness 19 mm
0 11.0 329.73.530
2 329.73.532
4 329.73.534
3 329.73.533
6 329.73.536
For side panel thickness 16 mm
0 7.5 329.73.540
2 329.73.542
3 329.73.543
4 329.73.544
6 329.73.546
• Material: Zinc alloy• Color: Nickel plated• Adjustment facility: Depth and height adjustment via eccentric, height adjustment ±2 mm via slot
Duomatic SM Cruciform Mounting PlatesWith quick fixing system
Duomatic Concealed HingesFor quick fixing (SM)
→ For screw fixingWith chipboard screws
→ For screw fixingWith pre–mounted special screws
→ For screw fixingWith pre–mounted special screws and spreading dowels
Drilling patternD
37 37
32
Drilling patternDrilling depth
37
5
32
Drilling patternDrilling depth
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.32
3
Duomatic Concealed HingesFor sliding on (A)
37
5
32
Drilling patternDrilling depth
Drilling pattern
37
5
32
Drilling depth
Drilling pattern
Drilling patternD
37 37
32
• Material: Zinc alloy• Color: Nickel plated• Adjustment facility: Depth and height adjustment via eccentric
Duomatic A Cruciform Mounting PlatesWith slide-on system
→ For screw fixingWith chipboard screws
→ For screw fixingWith pre–mounted special screws
→ For screw fixingWith pre–mounted special screws and spreading dowels
Distance D mm Material Cat. No.
Distance from edge 28 mm
0 Steel 329.87.500
1 329.87.501
2 329.87.502
3 329.87.503
9 329.87.609
12 329.87.612
Distance from edge 37 mm
0 Steel 329.80.528
2 329.80.546
3 329.80.555
4 329.80.564
6 329.80.582
9 329.80.590
Distance D mm Material Cat. No.
Distance from edge 19 mm,drilling depth 11.0 mm
0 Steel 329.81.525
2 329.81.543
3 329.81.552
4 329.81.561
6 Zinc alloy 329.81.589
9 329.81.590
For center panel thickness 19 mm,drilling depth 8.5 mm
0 Steel 329.81.800
2 329.81.802
3 329.81.803
6 329.81.806
9 329.81.809
Distance D mm Material Cat. No.
For side panel thickness 19 mm,drilling depth 11.0 mm
0 Steel 329.80.700
3 329.80.703
For center panel thickness 16 mm,drilling depth 7.5 mm
0 Steel 329.80.710
6 329.80.716
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.33
3
Packing: 1 piece
Packing: 1 piece
Distance D mm Cat. No.
0 329.84.020
2 329.84.022
3 329.84.023
6 329.84.026
9 329.84.029
Distance D mm Cat. No.
Dowel length 11 mm
0 329.84.030
Duomatic Concealed HingesFor sliding on (A)
• Material: Zinc alloy• Color: Nickel plated• Adjustment facility: Height adjustment ±2 mm via eccentric
Duomatic A Cruciform Mounting PlatesWith slide-on system
For screw fixingWith chipboard screws
For screw fixingWith pre–mounted special screws
For screw fixingWith pre–mounted dowels
Distance Dmm
Drilling depthmm
Cat. No.
For side panel thickness 19 mm
0 11.0 329.84.000
3 329.84.003
For center panel thickness 16 mm
0 7.5 329.84.010
6 329.84.01337
5
32
Drilling patternDrilling depth
D
37 3732
Drilling pattern
Drilling pattern
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.34
3
The Metallamat A (slide-on system)• The door is fitted onto the fixed mounting plate by sliding on.
Slide on system
Attachment methods
Cup for screw fixingCup fixing with chipboardscrews with countersunk head
Mounting plate for screw fixingFixing with chipboard screws or withpre-mounted special screws into32 mm series drilled holes.
Mounting door to cabinet
Metallamat Aslide-on systemHinge arm is slid onto mounting plate and screwedin position.
Adjusting facilities
Side adjustmentAdjusting distance on concealedhinge +3 mm
Height adjustmentVia mounting plates adjustingdistance 2 mm
Depth adjustmentAdjusting distance on concealedhinge +4 mm, -1 mm
Processing and mounting deviations can becorrected with the three-dimensional adjustingfacility.
Factory settingsSide, height and depth adjustment: Zero positionDoor gap: 0.5 or 2.0 mm depending on the mountingplate.
MountingMounting options
A Hinge arm lengthB Hinge arm heightC Door offsetD Distance (mounting plate)E Distance to cupF GapG Door overlay Full overlay mounting
Concealed hinge withstraight arm
Half overlay mountingConcealed hinge withcranked arm
Inset mountingConcealed hinge withhigh cranked arm
InformationMetallamat A
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.35
3
InformationMetallamat A
Drilling pattern Cup dimensions Cruciform mounting plate
Drilling pattern 48/6 for screw fixing
Determining the minimum gap that is required
The required minimum gap depends on the hinge type, distance to cup and door thickness. Once the doorthickness and the distance to cup have been determined, the minimum gap is shown in the application table.
Example :With a door thickness of 19 mm and a distance to cup of 4 mma minimum gap of 2 mm is required.
Number of concealed hinges per door
The values in the table are sample measurements. Trial mounting is recommended. The number of concealed hinges per door depends on:
According to the example diagram, three concealed hinges have to befitted with a door height of 1,500 mm and a door weight of 7 – 12 kg.
Choice of mounting plate
The different distance heights of the mountingplates allow adjustments to be made to thedoor overlay. The distance is determined bythe mounting plate thickness. The starting pointfor determining the required distance is thedesired type of mounting with a defined dooroverlay .
Example
4 5 6 7 8 9 10 11 12 13 3 4 5 6 7 3
3 4 5 6 7 4
6 8
3 4 5 6 73 4 5 6 7
Mounting plate distance mm
Once the door overlay and the distance to cup have been determined, the distance can be looked up in the applicationtable. In the example the door overlay is defined at 10 mm and the distance to cup at 5 mm. This produces a distance of 4 mm.
D DistanceG Door overlayF GapE Distance to cup
Door overlay mm
Distance to cup mm
Number of hinges
Hei
ght
Trial mounting is recommended
Door thickness mm Distance to cup mm
16 1,2 1,2 1,1 1,118 1,7 1,7 1,6 1,619 2,0 2,0 1,9 1,920 2,4 2,3 2,2 2,222 3,3 3,1 3,0 2,924 4,5 4,2 4,0 3,926-32
3 4 5 6
Door width and heightDoor weightDoor material
minimum gap
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.36
3
Metallamat A→ Opening angle 110°
• Material: Steel cup and hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• For door thickness: 16-22 mm• Fixing door to carcase: Sliding on system• Installation: Door to cabinet with slide-on system• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring and push version
NoteDimensions and gap specifications in drawings and tables are calculated:• Using factory settings• For mounting plate distance 0 mm
Full overlay mountingMounting platedistance
Cup fixing Cat. No.
Screw fixing 316.30.500
Screw fixing push version ** 316.30.800
** Can be used with Metallamat mounting plate and in combination with our magnetic spring catch
Cup dimensions Drilling dimensions for cup fixing
Full overlay mounting with mounting plate
Metallamat Concealed HingesFor wooden doors
Door thickness mm
Distance to cup mm
3 4 5 6 7
15 0,6 0,6 0,6 0,6 0,6
16 0,8 0,8 0,8 0,8 0,8
17 1,1 1,0 1,0 1,0 1,0
18 1,4 1,4 1,3 1,3 1,3
19 1,8 1,7 1,7 1,6 1,6
20 2,2 2,1 2,0 2,0 2,0
21 2,8 2,6 2,5 2,4 2,3
22 3,4 3,1 3,0 2,8 2,7
23 4,1 3,8 3,6 3,3 3,2
Door overlay mm
13 14 15 16 17 18 19 20 21 22 23 A
3 4 5 6 7 2
3 4 5 6 7
3 4 5 6 7 4
3 4 5 6 7 6
3 4 5 6 7 8
Distance to cup E mm Mounting plate distance mm
Mounting plates are available for slide-on system (A) with 2, 4, 6 and 8 mm
• Hinge arm: Straight
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.37
3
Half overlay mounting/twin mounting
Mounting platedistance
Mounting plate
Cup fixing Cat. No.
Screw fixing 316.30.501
Screw fixing push version ** 316.30.801
** Can be used with Metallamat mounting plate and in combination with our magnetic spring catch
Cup fixing Cat. No.
Screw fixing 316.30.502
Screw fixing push version ** 316.30.802
** Can be used with Metallamat mounting plate and in combination with our magnetic spring catch
Metallamat Concealed HingesFor wooden doors
Door overlay mm
4 5 6 7 8 9 10 11 12 13 14 A
3 4 5 6 7 2
3 4 5 6 7
3 4 5 6 7 4
3 4 5 6 7 6
3 4 5 6 7 8
Distance to cup E mm Mounting plate distance mm
Mounting plates are available for slide-on system (A) with 2, 4, 6 and 8 mm
Door overlay mm
-4 -3 -2 -1
3 4 6
3 4 5 6 8
Distance to cup E mm Mounting plate distance mm
• Hinge arm: Cranked • Hinge arm: High cranked
Inset mounting
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.38
3
Metallamat A
→ Opening angle 175°
Full overlay mounting
Cup fixing Cat. No.
Screw fixing 316.32.600
Cup dimensions Drilling dimensions for cup fixing
Mounting platedistance
Door overlay mm
11 12 13 14 15 16 17 18 19 20 21 22 A
3 4 5 6 7 8 2
3 4 5 6 7 8
3 4 5 6 7 8 4
3 4 5 6 7 8 6
3 4 5 6 7 8 8
Distance to cup E mm Mounting plate distance mm
Mounting plates are available for slide-on system (A) with 2, 4, 6 and 8 mm
Door thickness mm
Distance to cup mm
3 4 5 6 7 8
20-24 No gap required
25 3,2 3,0 2,7 2,1 1,6 0,8
26 6,0 5,2 4,4 3,6 2,8 2,0
• Material: Zinc alloy cup, steel hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• For door thickness: 16-22 mm• Fixing door to carcase: Sliding on system• Installation: Door to cabinet with slide-on system• Drilling depth: Hinge cup 12.5 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring and push version
NoteDimensions and gap specifications in drawings and tables are calculated:• Using factory settings• For mounting plate distance 0 mm
Metallamat Concealed HingesFor wooden doors
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.39
3
Metallamat AFor blind corner applications
Half overlay and inset mounting
Cup fixing Cat. No.
Screw fixing 316.32.601
For half overlay mounting / twin mounting
A mounting plate with distance 8 mm must be used for inset mounting.
Door overlay mm
-1 0 1 2 3 4 5 6 7 8 9 10 A
3 4 5 6 7 8 2
3 4 5 6 7 8
3 4 5 6 7 8 4
3 4 5 6 7 8 6
3 4 5 6 7 8 8
Distance to cup E mm Mounting plate distance mm
Mounting plates are available for slide-on system (A) with 2, 4, 6 and 8 mm
Door overlay mm
-1 0
3 4 8
Distance to cup E mm Mounting plate distance mm
Inset mounting Set back mounting plate screw-on position by door thickness.
Half overlay mounting/twin mounting
• Hinge arm: Straight
Blind corner application with mounting plate• Material: Steel cup, zinc alloy hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• For door thickness: 16-22 mm• Fixing door to carcase: Sliding on system• Installation: Door to cabinet with slide-on system• Drilling depth: Hinge cup 12.5 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring and push version
NoteDimensions and gap specifications in drawings and tables are calculated:• Using factory settings• For mounting plate distance 0 mm
Mounting plate distance 6 mm≥ 58 slide-on systemE – 3 – 7 mm
Mounting plate distance 2 mm≥ 53 slide-on system
For inset mounting
Metallamat Concealed HingesFor wooden doors
Cup fixing Cat. No.
Screw fixing 316.35.500
• Hinge arm: Straight
Installation• In order to mount the inner surface of the door flush with the inner surface of the blind corner, always use mounting plates with distance 6 mm.• The standard screw-on position of the mounting plate is 37 mm from the edge of the blind corner.
→ Opening angle 92°
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.40
3
Metallamat Concealed HingesFor wooden doors
Distance 8 mm, half overlay Distance 2 mm, full overlay
Distance 6 mm, mitre Mounting plate distance
Metallamat AFor 30° corner applications
30° Corner applications with mounting plate
• Material: Steel cup, zinc alloy hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• Fixing door to carcase: Sliding on system• Installation: Door to cabinet with slide-on system• Drilling depth: Hinge cup 12.5 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring
• Area of application: For corner applications with mounting plate that requires underlying• Material: Plastic, black• Version: Stackable
Cup fixing Cat. No.
Screw fixing 316.34.500
Heightmm
Cat. No.
6.5 317.93.630
NoteDimensions and gap specifications in drawings and tables are calcu-lated:• Using factory settings• For mounting plate distance 0 mm• For door offset with max. opening angle• Screw-on position of mounting plate sometimes differs from standard position.
→ Opening angle 92°
Wedge for 52.5° corner application
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.41
3
Metallamat Concealed HingesFor wooden doors
Metallamat A For 45° corner applications
Wedge for 52.5° corner application
→ Opening angle 92°
45° Corner applications with mounting plate
• Material: Steel cup, Zinc alloy hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• Installation: Door to cabinet with slide-on system• Drilling depth: Hinge cup 12.5 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring
• Area of application: For corner applications with mounting plate that requires underlying• Material: Plastic, black• Version: Stackable
Cup fixing Cat. No.
Screw fixing 316.34.501
Heightmm
Cat. No.
6.5 317.93.630
NoteDimensions and gap specifications in drawings and tables are calcu-lated:• Using factory settings• For mounting plate distance 0 mm• For door offset with max. opening angle• Screw-on position of mounting plate sometimes differs from stan-dard position.
Distance 6 mm, half overlay Distance 2 mm, full overlay
Distance 4 mm, mitreMounting plate distance
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.42
3
Metallamat Concealed HingesFor glass doors
Metallamat A
→ Opening angle 92°
Glass thickness mm
Distance to cup mm
3 4 5 6 7 8 9
4 - 7 The door overlay for opening is always 1 mm
Door overlay mm
13 14 15 16 17 18 19 20 21 22 23 24 25 A
3 4 5 6 7 8 9 2
3 4 5 6 7 8 9
3 4 5 6 7 8 9 4
3 4 5 6 7 8 9 6
3 4 5 6 7 8 9 8
Distance to cup E mm Mounting plate distance mm
45° Corner applications with mounting plate
Installation dimensions
Drilling pattern for cup fixing
• Material: Plastic cup, steel hinge arm• Finish: Black cup, nickel plate hinge arm• Cup fixing: For screw fixing• Installation: Door to cabinet with slide-on system• Drilling depth: 4 - 7 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring
NoteDimensions and gap specifications in drawings and tables are calcu-lated:• Using factory settings• For mounting plate distance 0 mm
Full overlay mounting
• Hinge arm: Straight
Cup fixing Cat. No.
Screw fixing 316.33.300
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.43
3
Round
Semi-circular
Half overlay mounting / twin mounting Inset mounting
Cup trim cap
• Hinge arm: Cranked • Hinge arm: High cranked
• Material: Zinc alloy
Cup fixing Cat. No.
Screw fixing 316.33.301
Cup fixing Cat. No.
Screw fixing 316.33.302
Finish Cat. No.
Chrome plated matt 316.10.420
Packing: 1 piece
Finish Cat. No.
Chrome plated matt 316.10.410
Nickel plated matt 316.10.610
Door overlay mm
4 5 6 7 8 9 10 11 12 13 14 15 16 A
3 4 5 6 7 8 9 2
3 4 5 6 7 8 9
3 4 5 6 7 8 9 4
3 4 5 6 7 8 9 6
3 4 5 6 7 8 9 8
Distance to cup E mm Mounting plate distance mm
Door overlay mm
-4 -3 -2 -1
3 4 6
3 4 5 6 8
Distance to cup E mm Mounting plate distance mm
EF
Metallamat Concealed HingesFor glass doors
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.44
3
Metallamat Concealed HingesFor Sliding on (A)
• Material: Steel• Color: Nickel plated• Adjustment facility: Height adjustment ±2 mm via slot
Metallamat A Cruciform Mounting PlatesWith slide-on system
→ For screw fixingwith chipboard screws
→ For screw fixingWith pre-mounted special screws
Drilling dimensions
Drilling dimensions
Distance D Cat. No.
2 mm 316.51.502
4 mm 316.51.504
6 mm 316.51.506
8 mm 316.51.508
Distance D Cat. No.
4 mm 316.51.524
6 mm 316.51.526
Cat. No.
Damping device with adjustable pin 316.53.730
• Material: Plastic ABS• Finish: Nickel coloured• Version: With screw adjustable for speed of closing Suitable for Metallamat A (316.30.500, 316.30.501, 316.30.502)
→ Door bufferFor screwing onto hinge cup of Metallamat A
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.45
3
Drilling pattern Cup dimensions
Mounting door to cabinet
Adjusting facilities
Mounting
Slide-on systemHinge arm is slid onto mounting plate and screwed in position.
For screw fixingDrilling pattern 48/6Cup for screw fixing with countersunkchipboard screws
For screw fixingDrilling pattern 38/7,5Cup for screw fixing with countersunkchipboard screws
Metalla A Metalla Mini A Metalla Mini AMetalla A
Side adjustmentAdjusting distance on concealedhinge +3 mm
Height adjustmentVia mounting plates adjustingdistance 2 mm
Depth adjustmentAdjusting distance on concealedhinge +4 mm, -1 mm
Processing and mounting deviations can becorrected with the three-dimensional adjustingfacility.
Factory settingsSide, height and depth adjustment: Zero position
A Hinge arm lengthB Hinge arm heightC Door offsetD Distance (mounting plate)E Distance to cupF GapG Door overlay
Mounting options
Full overlay mountingConcealed hinge withstraight arm
Half overlay mountingConcealed hinge withcranked arm
Inset mountingConcealed hinge withhigh cranked arm
InformationMetalla A and Metalla Mini Concealed Hinges
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.46
3
Metalla A� Opening angle 110°
Note
calculated:• Using factory settings• For mounting plate 0 mm
Full overlay mounting with mounting plate
• Material: Steel cup and hinge arm• Finish: Nickel plated
• Installation: Door to cabinet with slide-on system (A)• Drilling depth: Hinge cup 12.0 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring
Full overlay mounting
13.1
2
0
-2
Door overlay mm
Distance to cup E mm Mounting plate distance mm4
12 13 14 15 16 17 18 19 20 21 22
3 4 5 6 7
3 4 5 6 7
3 4 5 6 7
3 4 5 6 7
Drilling pattern 48/6
311.90.500
Metalla Concealed HingesFor wooden doors
• Hinge arm: Straight
• Hinge arm: Cranked
• Hinge arm: High cranked
Half overlay mounting / twin mounting
Inset mounting
21.1
0
-2
Door overlay mm
Distance to cup E mm Mounting plate distance mm4
2
4 5 6 7 8 9 10 11 12 13 14
3 4 5 6 7 3 4 5 6 7
3 4 5 6 7 3 4 5 6 7
4
2
0
Door overlay mm
Distance to cup E mm Mounting plate distance mm
3 2 1 0 -1 -2 -3 -4 -5
3 4 5 6 7
3 4 5 6 7
3 4 5 6 7
Drilling pattern 48/6
311.90.501
Drilling pattern 48/6
311.90.502
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.47
3
Metalla Concealed HingesFor sliding on (A)
• Material: Steel• Finish: Nickel plated• Adjustment facility: Height adjustment ± 2 mm via slot• Distance from edge: 37 mm
Drilling pattern
Drilling pattern
Distance D mm Drilling pattern 48/6
-2 311.98.505
0 311.98.500
2 311.98.502
4 311.98.504
Distance D mm Screw length mm Drilling pattern 48/6
-2 14 311.98.515
0 311.98.510
2 311.98.512
4 311.98.514
Metalla A Cruciform Mounting PlatesWith slide-on system
→ For screw fixing With chipboard screws
→ For screw fixing With pre-mounted special screws
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.48
3
Metalla Mini AFor narrow frames
Door overlay mm
11 12 13 14 15 16 17 18 19
3 4 5 -2
3 4 5 0
3 4 5 2
3 4 5 4
Distance to cup E mm Mounting plate distance mm
Door overlay mm
1 2 3 4 5 6 7 8 9
3 4 5 -2
3 4 5 0
3 4 5 2
3 4 5 4
Distance to cup E mm Mounting plate distance mm
Door overlay mm
5 4 3 2 1 0 -1 -2 -3
3 4 5 -2
3 4 5 0
3 4 5 2
3 4 5 4
Distance to cup E mm Mounting plate distance mm
EF
Full overlay mounting with mounting plate
• Material: Steel cup and hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing • Installation: Door to cabinet with slide-on system• Drilling depth: Hinge cup 10.0 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• For door thickness:12 – 22 mm• With automatic closing spring
Full overlay mounting
Half overlay mounting / twin mounting
Inset mounting
• Hinge arm: Straight • Hinge arm: High cranked
• Hinge arm: Cranked
Cup fixing Drilling pattern 38/7.5
For screw fixing 311.41.500
Cup fixing Drilling pattern 38/7.5
For screw fixing 311.41.502
Cup fixing Drilling pattern 38/7.5
For screw fixing 311.41.501
Metalla Mini Concealed HingesFor wooden doors
→ Opening angle 95°
Packing: 1 piece Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.49
3
3 4 5
13 0.2 0.2 0.2
14 0.4 0.3 0.3
15 0.6 0.5 0.5
16 0.8 0.8 0.7
17 1.3 1.1 1.0
18 1.9 1.5 1.3
19 2.8 2.3 1.9
20 3.6 3.1 2.7
Metalla Mini AFor 45° corner applications
Full overlay mounting with mounting plate
• Material: Steel cup, zinc alloy hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing • Installation: Door to cabinet with slide-on system• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring
Blind corner mounting for wood
Door thickness mm Distance to cup mm
Cup fixing Drilling pattern 38/7.5
For screw fixing 311.46.500
Cup fixing Drilling pattern 38/7.5
For screw fixing 311.45.500
Metalla Mini Concealed HingesFor wooden doors
→ Opening angle 95°
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.50
3
Metalla Mini A
→ Opening angle 95°
Glass thick-ness mm
Distance to cup mm
3 4 5 6
4 – 6 The door overlay for opening is always 1 mm
Door overlay mm
14 15 16 17 18 19 20 21
3 4 5 6 0
3 4 5 6 2
3 4 5 6 4
Distance to cup E mm Mounting plate distance mm
Door overlay mm
4 5 6 7 8 9 10 11
3 4 5 6 0
3 4 5 6 2
3 4 5 6 4
Distance to cup E mm Mounting plate distance mm
Full overlay mounting
Half overlay mounting / twin mounting
• Hinge arm: Straight
• Hinge arm: Cranked
26
4-6
Installation dimensions
Drilling pattern for cup fixing
Full overlay mounting with mounting plate
• Material: Plastic cup, steel hinge arm• Finish: Black cup, nickel plated hinge arm• Cup fixing: For screw fixing • Installation: Door to cabinet with slide-on system• For glass thickness:4 – 6 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)• With automatic closing spring
Cup fixing Cat. No.
For screw fixing 311.42.500
Cup fixing Cat. No.
For screw fixing 311.42.501
Metalla Mini Concealed HingesFor glass doors
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.51
3
Metalla Mini AFor blind corner applications
→ Opening angle 92°
Half overlay mounting
Blind corner mounting for glass
Cup trim cap
• Hinge arm: Straight
• Material: Plastic
Blind corner application with mounting plate
• Material: Plastic cup, steel hinge arm• Finish: Black cup, nickel plated hinge arm• Cup fixing: For screw fixing • Installation: Door to cabinet with slide-on system• For glass thickness:4 – 6 mm• Adjustment facility: 3-dimensional (with appropriate mounting plate)
Cup fixing Cat. No.
For screw fixing 311.42.502
Cup fixing Cat. No.
For screw fixing 311.45.510
Finish Cat. No.
Aluminum colored 311.43.200
Chrome colored 311.43.210
Door overlay mm
4 3 2 1 0 -1 -2 -3
3 4 5 6 0
3 4 5 6 2
3 4 5 6 4
Distance to cup E mm Mounting plate distance mm
Installation dimensions
Drilling pattern for cup fixing
Metalla Mini Concealed HingesFor glass doors
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.52
3
Metalla Mini Concealed HingesFor sliding on (A)
• Material: Steel• Color: Nickel plated• Adjustment facility: Height adjustment ±2 mm via slot
Metalla Mini A Cruciform Mounting Plates
→ For screw fixingWith chipboard screws
→ For screw fixingWith pre-mounted special screws, edge distance 37 mm
→ For screw fixingWith pre-mounted special screws, edge distance 28 mm
Drilling pattern
Drilling pattern
Drilling pattern
Distance Dmm
Screw lengthmm
Cat. No.
-2 11 316.51.515
0 316.51.511
2 316.51.513
0 14 316.51.510
2 316.51.512
4 316.51.514
Distance Dmm
Screw lengthmm
Cat. No.
0 11 311.51.561
2 311.51.563
Distance Dmm
Cat. No.
0 311.51.520
2 311.51.522
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.53
3
Metalla Concealed HingesFor wooden doors
Metalla SM,cup Ø35 mm
Metalla A,cup Ø35 mm
• Material: Steel• Finish: Galvanized• Cup fixing: Screw fixing• Fixing door to carcase: Clip on system• For door thickness: 16-22 mm• Adjustment: 3-dimensional
Version Cat. No.
Full overlay mounting 311.60.520
Half overlay mounting 311.60.521
Inset mounting 311.60.522
→ Opening angle 110°
→ Opening angle 105°
• For door thickness: 12-24 mm
Version Cat. No.
Full overlay mounting 311.64.501
Half overlay mounting 311.64.502
Insert mounting 311.64.503
Packing: 1 piece
Packing: 1 set
• Material: Steel• Finish: Galvanized• Cup fixing: Screw fixing• Fixing door to carcase: Clip-on system• For door thickness: Min. 22 mm
Version Cat. No.
Full overlay mounting 311.67.511
Half overlay mounting 311.67.512
Inset mounting 311.67.513
Packing: 1 piece
Metalla SM,Cup Ø 40 mm→ Opening angle 92°→ Opening angle 105°
Econo hinge including mounting plate, cup Ø35 mm
• Material: Steel• Finish: Nickel plated• Cup fixing: Screw fixing• Fixing door to carcase: Slide on system
Version Cat. No.
Full overlay mounting 311.92.500
Half overlay mounting 311.92.501
Insert mounting 311.92.502
Packing: 1 set
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.54
3
Metalla Concealed HingesFor wooden doors
Metalla SMwith integrated damping
Opening angle 105°
NoteDimensional and gap specifications in drawing and tables arecalculated:• Using factory settings• For mounting plate 0 mm
Full overlay mounting
Packing: 200 pieces /carton
Packing: 200 pieces /carton
Inset mounting
Full overlay mounting with mounting plate
• Material: Steel cup and hinge arm• Finish: Nickel plated• Cup fixing: For screw fixing• Installation: Door to cabinet with
quick-fixing system (SM)• Drilling depth: Hinge cup12.0 mm• Adjustment: 3-dimensional
(with appropriate mounting plate)• With automatic closing spring• With integrated damping
• Hinge arm: Straight
Door overlay mm
12 13 14 15 16 17 18 19
3 4 5 6 0
3 4 5 6 2
3 4 5 6 4
Distance to cup E mm Mounting plate distance mm
Cup fixing 45/9.5 48/6 52/5.5For screw fixing 311.60.505 311.60.525 311.60.515
• Hinge arm: Cranked
Door overlay mm
5 6 7 8 9 10 11 12
3 4 5 6 0
3 4 5 6 2
3 4 5 6 4
Distance to cup E mm Mounting plate distance mm
45/9.5 48/6 52/5.5Screw fixing 311.60.506 311.60.526 311.60.516
• Hinge arm: High Cranked
Door overlay mm-3 -2 -1 0
6 5 4 3 0
6 5 2
Distance to cup E mm
45/9.5 48/6 52/5.5311.60.507 311.60.527 311.60.517
Half overlay mounting→
Cup fixing
Packing: 200 pieces /carton
Cup fixingFor screw fixing
Mounting plate distance mm
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.55
3
Metalla Concealed HingesFor quick fixing (SM)
For screw fixingwith chipboard screws
Drilling pattern
Metalla SM Mounting Plates
→
Height Cat. No.
0 mm 311.71.540
2 mm 311.71.542
4 mm 311.71.544
Packing: 1 piece or 200 pieces /carton
• Material: Zinc• Finish: Galvanized
Height Cat. No.
0 mm 311.71.500
2 mm 311.71.502
4 mm 311.71.504
Height Cat. No.
0 mm 311.71.580
2 mm 311.71.582
4 mm 311.71.584
Packing: 1 piece
Packing: 1 piece
• Material: Zinc• Finish: Galvanized
• Material: Steel• Finish: Nickel plated
Cover cap
• Material: Steel• Finish: Galvanized• Version: With HÄFELE logo
Version Cat. No.
With HÄFELE logo 311.65.700
Order reference
Cover caps can be individually printed from minimum order quantity of 100,000.
Packing: 1 piece
• Material: Zinc• Finish: Galvanized
Height Cat. No.
0 mm 311.70.570
2 mm 311.70.572
4 mm 311.70.574
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.56
3
Econo Mini Hinge, cup Ø 26 mm
• Material: Steel• Finish: Nickel plated• Cup fixing: Screw fixing• Fixing door to carcase: Slide on system• 3-dimensional (with appropriate mounting plate)• With automatic closing spring
• Material: Steel• Finish: Nickel plated
Cup fixing Cat. No.
Screw fixing 311.20.500
Cup fixing Cat. No.
Screw fixing 311.20.501
Cup fixing Cat. No.
Screw fixing 311.20.503
Cup fixing Cat. No.
Screw fixing 311.51.520
Econo Mini HingesFor wooden doors
Cup dimensions Drilling dimensions for cup fixing
Full overlay mounting
Half overlay mounting / twin mounting
Inset mounting
Mounting platedistance
Mounting platedistance
Mounting platedistance
Drilling pattern
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Metalla Mini A Mounting Plate
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.57
3
Stainless Steel Concealed HingeFor wooden doors
Stainless steel hinge,cup Ø35 mm
• Material: 304 Stainless steel• Finish: Polished
• Fixing door to carcase: Clip on system
Drilling dimensions
• Cup fixing:
Full overlay mounting
Door thickness (D)Distance to cup mm
3 4 515 0.5 0.5 0.516 0.7 0.7 0.717 0.8 0.8 0.818 1.0 1.0 1.019 1.2 1.2 1.220 1.4 1.4 1.4
Half overlay mounting
Door thickness (D)Distance to cup mm
3 4 515 0.5 0.5 0.516 0.7 0.7 0.717 0.8 0.8 0.818 1.0 1.0 1.019 1.2 1.2 1.220 1.4 1.4 1.4
Inset mounting
Door thickness (D)Distance to cup mm
3 4 515 0.5 0.5 0.516 0.7 0.7 0.717 0.8 0.8 0.818 1.0 1.0 1.019 1.2 1.2 1.220 1.4 1.4 1.4
Mounting Plate
Cat. No.
Screw fixing 327.20.000Cat. No.
Screw fixing 327.30.030
Cat. No.
Screw fixing 327.20.002
Cat. No.
Screw fixing 327.20.001
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
→ Opening angle 100°
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.58
3
Drilling and Insertion MachinesFutura 100
45/9,5/32 48/6/32 52/5,5/32
Machine for vertical drilling4-spindle drilling head suitable fordrilling holes for fittings
• Area of application: For surface drilling of drilling patterns, For press fitting concealed hinges and connectors, with matrixes• Version: With bi-rotary drilling spindles, For drill bits with 10 mm hex shank, with one flat side for clamping and adjusting screw• Power consumption: 1.1 kW• Dimensions: Work top 600 x 400 mm• Weight: approximately 30 kg
FunctionDrilling unit for surface (vertical) drilling:4-spindle drilling head with switching function, for drilling patterns(concealed hinges, connectors)
Adjusting facilities:Vertical, Y-position of locating ruler can be adjusted at work top from8 to 26 mm (scale).Horizontal, drilling depth adjustable from above from 8 to13 mm viascrew.Position on locating ruler can be adjusted with swivel stops(extends up to 2,500 mm).
Supplied with:
1 Futura 100 Drilling and insertion machine1 Vertical drilling unit with manual feed lever without drilling head1 Work top1 Locating ruler 600 mm2 Swivel stops with clamping lever
Model series Cat. No.
Futura 103 1-phase motor 110V/60Hz 001.85.103
Futura 101 1-phase motor 220V/60Hz 001.85.101
Futura 102 3-phase motor 400V/50Hz 001.85.102
Order referenceThe vertical spindle drilling head is not supplied and must be orderedseparately.The machine will be delivered with a pre-mounted vertical 4-spindledrilling head in accordance with your choice.Please compare the above shown power supply specifications withthe mains voltage in your country. If no motor version is suitable,please contact your responsible Häfele employee.
→ Vertical spindle drilling head fordrilling patterns
Drilling pattern
Cat. No.
Drilling pattern 45/9.5/32,vertical 4-spindle drilling headincluding press-in matrix for Clip Top concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 8 x 57 mm left
001.85.141
Drilling pattern 48/6/32,vertical 4-spindle drilling headincluding press-in matrix for Metallamat A concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 10 x 57 mm left
001.85.142
Drilling pattern 52/5.5/32,vertical 4-spindle drilling headincluding press-in matrix for Metallamat con-cealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 10 x 57 mm left
001.85.143
Order reference
All spindle drilling heads can be used to drill holes forRTA connectors, for example.The press-in matrix for RTA connectors is not supplied,please order separately.
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.59
3
Drilling and Insertion MachinesFutura 100
→ Accessories
Cat. No.
Extension ruler 1,250 mm 001.87.100
Extension ruler from 1,250 mm to 2,500 mm 001.87.110
Swivel stop with clamping lever 001.87.120
Press-in matrix for Metallamat concealed hinges,drilling pattern 52/5.5/32 and 48/6/32
001.87.210
Press-in matrix for Duomatic concealed hinges 94°,drilling pattern 52/5.5/32 and 48/6/32
001.87.211
Press-in matrix for Clip Top concealed hinges 120°,drilling pattern 45/9.5/32
001.87.212
Press-in matrix for Snap On concealed hinges 120°,drilling pattern 42/11/32
001.87.213
Press-in matrix for Rafix 20, Rasant-Tab, Slimfix andOnefix RTA connectors
001.87.220
Press-in matrix for Tab 18 RTA connector 001.87.221
Press-in matrix for Solo 32 RTA connector 001.87.222
Packing: 1 piece
Packing: 1 piece
Drill bitFor Futura drilling and insertion machine
• Version: Drill bit with hex shank 10 mm, with one flat side for clamping, adjusting screw for re-adjusting the drill bit length after sharpening• Material: Steel, cutting material hard metal HM• Effective length: 25 mm
Diametermm
Cat. No.
Total length 57 mm
Rotation direction right 3.0 001.85.400
5.0 001.85.402
6.0 001.85.404
8.0 001.85.406
12.0 001.85.410
15.0 001.85.412
18.0 001.85.444
19.0 001.85.446
20.0 001.85.448
23.0 001.85.452
26.0 001.85.454
35.0 001.85.458
40.0 001.85.459
Rotation direction left 3.0 001.85.401
5.0 001.85.403
6.0 001.85.405
8.0 001.85.407
10.0 001.85.409
Total length 77 mm
Rotation direction right 5.0 001.85.422
6.0 001.85.424
8.0 001.85.426
Rotation direction left 5.0 001.85.423
6.0 001.85.425
8.0 001.85.427
Order reference
Drill bits with a total length of 77 mm are used for the Futura 300drilling and insertion machine and must be inserted with the11 spindle drilling head turned (surface drilling).
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.60
3
Drilling and Insertion MachinesFutura 200
Packing: 1 piece
Machine for vertical drilling
4-spindle and 7-spindle drilling heads are suitable fordrilling holes for fittings and for series drilled holes
• Area of application: For surface drilling of drilling patterns and series drilled holes, for press fitting concealed hinges and connectors, with matrixes• Version: With bi-rotary drilling spindles, with blow function when lifting the spindle drilling head, for drill bits with 10 mm hex shank, with one flat side for clamping and adjusting screw• Power consumption: 1.1 kW• Dimensions: Work top 600 x 400 mm• Weight: approximately 40 kg
Note
A 6 bar compressed-air supply must be provided to operate themachine.
FunctionDrilling unit for surface (vertical) drilling:4-spindle drilling head with change function, for drilling patterns(concealed hinges, connectors)7-spindle drilling head, for series drilled holes (interval 32)
Control:Electric-pneumatic control with 2 semi-automatic processes and1 additional function:Work procedures for concealed hinges, series drilled holes andsurface drilled RTA connectors• First process: Vertical surface drilling with pulse drive• Second process: Vertical surface insertion with pulse drive• Additional function: Use of vertically clamping pneumatic holddown clamps, for fixing work pieces in position (optional)
Adjusting facilities:Vertical, Y-position of locating ruler can be adjusted at work top from8 to 95 mm (scale)Horizontal, drilling depth adjustable from above from 8 to 13 mm viahandwheel and scalePosition on locating ruler can be adjusted with swivel stops (extendsup to 2,500 mm);Pre-fixing possible for adjusting the distances of hinge cup drillholes, connector drill holes and series drilled holes.
Supplied with:
1 Futura 200 Drilling and insertion machine1 Vertical drilling unit without drilling head1 Pneumatic control1 Pair of pneumatic hold down clamps1 Work top1 Locating ruler 600 mm2 Swivel stops1 Pre-fixing facility
Order reference
The vertical spindle drilling head and press-in matrix are notsupplied, please order separately.The machine will be delivered with a pre-mounted vertical 4-spindledrilling head in accordance with your choice.Please compare the above shown power supply specifications withthe mains voltage in your country. If no motor version is suitable,please contact your responsible Häfele employee.
Model series Cat. No.
Futura 203 1-phase motor 110V/60Hz 001.85.203
Futura 201 1-phase motor 220V/60Hz 001.85.201
Futura 202 3-phase motor 400V/50Hz 001.85.202
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.61
3
Drilling and Insertion MachinesFutura 200
→ Vertical spindle drilling head fordrilling patterns
45/9,5/32 48/6/32 52/5,5/32
Cat. No.
Drilling pattern 45/9.5/32,vertical 4-spindle drilling headincluding press-in matrix for Clip Top concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 8 x 57 mm left
001.85.241
Drilling pattern 48/6/32,vertical 4-spindle drilling headincluding press-in matrix for Metallamat A concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 10 x 57 mm left
001.85.242
Drilling pattern 52/5.5/32,vertical 4-spindle drilling headincluding press-in matrix for Metallamat concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 10 x 57 mm left
001.85.243
Cat. No.
Series drilled holes,vertical 7-spindle drilling head, rigid for interval 32,with integrated marking pins and 7 HM drill bits5 x 57 mm
001.85.251
Cat. No.
Extension ruler 1,250 mm 001.87.100
Extension ruler from 1,250 mm to 2,500 mm 001.87.110
Swivel stop with clamping lever 001.87.120
Press-in matrix for Metallamat concealed hinges,drilling pattern 52/5.5/32 and 48/6/32
001.87.210
Press-in matrix for Duomatic concealed hinges 94°,drilling pattern 52/5.5/32 and 48/6/32
001.87.211
Press-in matrix for Clip Top concealed hinges 120°,drilling pattern 45/9.5/32
001.87.212
Press-in matrix for Snap On concealed hinges 120°,drilling pattern 42/11/32
001.87.213
Press-in matrix for Rafix 20, Rasant-Tab, Slimfix andOnefix RTA connectors
001.87.220
Press-in matrix for Tab 18 RTA connector 001.87.221
Press-in matrix for Solo 32 RTA connector 001.87.222
Chip suction funnel for horizontal drilling unit 001.85.260
Machine frame (can be dismantled), with 2 shelves 001.85.365
Packing: 1 piece
Packing: 1 piece
Order reference
All spindle drilling heads can be used to drill holes forRTA connectors, for example.The press-in matrix for RTA connectors is not supplied,please order separately.
→ Vertical spindle drilling head for seriesdrilled holes
→ Accessories
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.62
3
Drilling and Insertion MachinesFutura 300
The Futura 300 produces surface and front edge drillings without resetting the work piece.This allows drilling patterns to be created quickly and precisely, e.g. for Minifix RTA connector.
Machine for vertical and horizontal drilling
4-spindle, 7-spindle and 11-spindle drilling heads aresuitable for drilling holes for fittings, series drilled holesand blind holes
• Area of application: For surface drilling of drilling patterns and series drilled holes, for front edge drilling, for press fitting concealed hinges and RTA connectors, with matrixes• Version: With bi-rotary drilling spindles, with blow function when lifting the spindle drilling head, vertical drilling head can be extended up to 300 mm, for drill bits with 10 mm hex shank, with one flat side for clamping and adjusting screw• Power consumption: 1.1 kW• Dimensions: Work top 850 x 420 mm• Weight: approximately 110 kg
Note
A 6 bar compressed-air supply must be provided to operate themachine.
FunctionDrilling unit for surface (vertical) drilling:4-spindle drilling head with quick change function (toolless), fordrilling patterns (concealed hinges, connectors)7-spindle and 11-spindle drilling heads, for series drilled holes(interval 32).The 11-spindle drilling head rotates through 90° which allowssurface drillings for e.g. drawer runners or intermediate shelves
Drilling unit for front edge (horizontal) drillings:3-spindle drilling head, for series drilled holes (interval 32)
Control:Electric-pneumatic control with 3 pulse driven processes and2 additional functions:Work procedures for concealed hinges, series drilled holes andsurface drilled RTA connectors• First process: Vertical surface drilling• Second process: Vertical surface insertion• Additional function 1: Use of vertically clamping pneumatic holddown clamps, for fixing work pieces in position (optional)• Additional function 2: Vertical return travel restriction, for seriesdrilled holes, for example, the travel height of the machine can berestricted which reduces the cycle time of multiple drillings.Work processes for surface and front edge drilled RTA connectors• First process: Vertical surface drilling• Third process: Horizontal front edge drilling
Adjusting facilities:Vertical, Y-position of locating ruler can be adjusted at work top from0 to 200 mm (digital counter and crank). The locating ruler can bemoved by a further 100 mm which equals a max. adjusting range of300 mm.Horizontal, drilling depth adjustable from above from 8 to 13 mm viahandwheel and digital counter.Position on locating ruler can be adjusted with swivel stops (extendsup to 2,500 mm);The hinge cup, connector and series drilled holes distances areadjusted via crank and digital counter. The distance from the workpiece edge to the drill hole can be adjusted in depth via a pair ofstops that is integrated in the work top.
Supplied with:
1 Futura 300 Drilling and insertion machine1 Horizontal drilling unit with 3-spindle drilling head (interval 32)1 Vertical drilling unit without drilling head1 Electric-pneumatic control1 Pair of pneumatic hold down clamps1 Work top1 Locating ruler 900 mm2 Swivel stops1 Pair of stops
Order reference
The vertical spindle drilling head is not supplied and must be orderedseparately.The machine will be delivered with a pre-mounted vertical 4-spindledrilling head in accordance with your choice.Please compare the above shown power supply specifications withthe mains voltage in your country. If no motor version is suitable,please contact your responsible Häfele employee.
Packing: 1 piece
Model series Cat. No.
Futura 301 1-phase motor 220V/60Hz 001.85.301
Futura 304 3-phase motor 220V/60Hz 001.85.304
Futura 302 3-phase motor 400V/50Hz 001.85.302
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.63
3
Drilling and Insertion MachinesFutura 300
→ Vertical spindle drilling head fordrilling patterns
Drilling pattern
45/9,5/32 48/6/32 52/5,5/32
Order reference
All spindle drilling heads can be used to drill holes forRTA connectors, for example.The press-in matrix for RTA connectors is not supplied,please order separately.
Cat. No.
Drilling pattern 45/9.5/32,vertical 4-spindle drilling headincluding press-in matrix for Clip Top concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 8 x 57 mm left
001.85.341
Drilling pattern 48/6/32,vertical 4-spindle drilling headincluding press-in matrix for Metallamat A concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 10 x 57 mm left
001.85.342
Drilling pattern 52/5.5/32,vertical 4-spindle drilling headincluding press-in matrix for Metallamat concealedhinges;1 HM drill bit 35 x 57 mm right;2 HM drill bits 10 x 57 mm left
001.85.343
Packing: 1 piece
→ Vertical spindle drilling head for seriesdrilled holes
Cat. No.
Series drilled holes,vertical 7-spindle drilling head, rigid for interval 32,with integrated marking pins and 7 HM drill bits5 x 57 mm
001.85.351
Series drilled holes,vertical 11-spindle drilling head, rotates through 90°for interval 32,with integrated marking pins and11 HM drill bits 5 x 57 mm
001.85.353
Packing: 1 piece
→ Accessories
Cat. No.
Extension ruler 1,250 mm 001.87.101
Extension ruler from 1,250 mm to 2,500 mm 001.87.111
Swivel stop with clamping lever 001.87.120
Press-in matrix 001.87.200
Press-in matrix for Metallamat concealed hinges,drilling pattern 52/5.5/32 and 48/6/32
001.87.210
Press-in matrix for Duomatic concealed hinges 94°,drilling pattern 52/5.5/32 and 48/6/32
001.87.211
Press-in matrix for Clip Top concealed hinges 120°,drilling pattern 45/9.5/32
001.87.212
Press-in matrix for Snap On concealed hinges 120°,drilling pattern 42/11/32
001.87.213
Press-in matrix for Rafix 20, Rasant-Tab, Slimfix andOnefix RTA connectors
001.87.220
Press-in matrix for Tab 18 RTA connector 001.87.221
Press-in matrix for Solo 32 RTA connector 001.87.222
Chip suction funnel for horizontal drilling unit 001.85.360
Machine frame (can be dismantled), with 2 shelves 001.85.365
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.64
3
Arm fixing
Aximat 100 SM:For screw fixing• With pre-mounted special screws
Aximat 100:For screw fixing• With pre-mounted special screws• With chipboard screws
For press fitting• With pre-mounted spreading dowels
Aximat 100 SM with quick fixing system
3 270° – 0
250° – 3
6 250° – 0
180° – 0
Flat arm inside Outside withexposed axle
Gapmm
Aximat 100 SM
Aximat 100
Openingangle
Door offsetmm
Page For wooden doors
Full
over
lay
mou
ntin
g
With
open
ing
angl
e 90
°
With
open
ing
angl
e 18
0°
Hal
f ove
rlay
mou
ntin
g
Twin
mou
ntin
g
Inse
t mou
ntin
g
Application MatrixAximat 100 Concealed Hinges
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.65
3
Aximat 100 SM (quick fixing system)
Mounting and removing the door
Aximat 100 SM
Aximat 100 A
InstallationSlide cup onto the hinge arm andallow to engage
Lock securing facility, close cupcover
RemovingRelease securing facility
Open cover and remove cup fromhinge arm
Aximat 100 A (slide-on system)
InstallationSlide cup onto the hinge arm Tighten screws Remove
Loosen screwRemove cup form hinge arm
Mounting options
Full overlay mounting Half overlay mounting Twin mounting Inset mounting
Installation dimensionsAximat 100 SM
Drilling patternFor arm fixing
Drilling patternFor cup fixing
Aximat 100 A Full overlay mounting Inset mounting
InformationAximat 100 Concealed hinges with exposed axle
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.66
3
Number of concealed hinges per door
The values in the table are sample measurements for doors up to 600 mm.
The door’s width should not exceed its height.Door width max. 600 mm. Please inquire for doors wider than 600 mm.
The distance between the hinges of doors with two hinges must be at leastas long as the door is wide, if possible even longer
In case of heavy loads, an additional hinge mounted approx. 100 mm belowthe top hinge is recommended.DIm. X = max. 100 mm
The number of concealed hinges per door depends on: Door width and height Door weight Door material
A third screw must be used for securing the hinge arm
According to the example diagram, four concealed hinges have to be fitted with a door height of 2,000 mm and a door weight of 16 kg.
With doors under 400 mm wide the number of concealed hinges must be determined by a mounting test.Trial mounting is recommended.
Adjusting facilitiesThe two and three-dimensional adjusting facilities allowcorrecting processing and installation deviations.Side, height and depth adjustments are factory set to zeroposition.
Aximat 100 SM with 3-dimensional adjusting facility - 3 mm via eccentric 2 mm via eccentric 2.5 mm via slot
Aximat 100 SM with 2-dimensional adjusting facility - 3 mm via eccentric - 2 mm via slots
Aximat 100 A with 2-dimensional adjusting facility - 3 mm via eccentric 2 mm via slots
Side adjustment
Height adjustment
Depth adjustment
InformationAximat 100 Concealed Hinges with exposed axle
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.67
3
Planning and ConstructionAximat 100 Concealed hinges with exposed axle
Calculation of the door widthDiagram abbreviationsLSB = internal cabinet widthTA = door overlayTB = door widthF = gap
Cabinet with 1 door
Cabinet with twin door
Continuous construction with twin doors
External cabinet width 400 mmSide panel thickness 2 x 19 mm - 38 mm
Internal cabinet width 362 mm
LSB + (2 x TA) = door widthExample362 mm + (2 x 15 mm) = 392 mm
External cabinet width 800 mmSide panel thickness 2 x 19 mm - 38 mm
Internal cabinet width 762 mm
2
= door widthLSB + (2 x TA) - (1 x F)
Example
762 mm + (2 x 16 mm) - (1 x 6 mm)2 394 mm
External cabinet width 800 mmSide panel thickness 1 x 19 mm - 19 mm
Internal cabinet width 781 mm
2
= door widthLSB + (2 x TA) - (1 x F)
Example
781 mm + (2 x 6.5 mm) - (1 x 6 mm)2 394 mm
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.68
3
InformationFurniture Hinges
InformationFurniture hingesNew products and systemsNew products and systemsPlanning and ConstructionDimensional data not bindin g. We reserve the right to alter specifications without notice.
To distinguish between hinges with screw-on flanges,view them in open position from the front against the countersunk screw hole side.If the female flange (= door flange) is on the left, it is aleft hand hinge. If it is on the right, it is a right hand hinge.
Recommended number of hinges per doorThe key factors for the required number of furniture hinges per doorare: Door width and height Door weight Door material
The number of furniture hinges shown in the diagram is a recommendation and provides a guideline for 600 mm wide doorsmade from 19 mm chipboard. Trial mounting is recommended. Thedistance X between the furniture hinges must always be as long aspossible for stability reasons.
CrankThere are 4 different types of crank.
Crank A,straight hingeFor butting inset oroverlay doors.The hinge pin ispositioned centrallybetween the two flanges.
Crank BFor set back doors.One flange is cranked by the materialthickness.
Crank DFor rebated doors, withshorter female flange.
Crank L1For butting overlaydoors. Door openingangle 270. The hingehas an internal knuckle.
According to the examplediagram two furniture hinges haveto be fitted with a door height of 900 mm.
Left hand hinge Right hand hinge
•••
Butt Hinges Brass, with decorative finial
• Length: 50 mm or 60 mm• Flange thickness: 1.7 mm• Barrel Ø: 8 mm• Installation: For screw fixing
• Gap: 1 mm
Crank A, straight
Finish Mounting Cat. No.
Length 50 mm
Polished Left 321.40.828
Right 321.40.837
Antique Left 321.40.122
Right 321.40.131
Length 60 mm
Polished Left 321.40.846
Right 321.40.855
Antique Left 321.40.140
Right 321.40.159
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.69
3
Piano HingesFor inset doors
For screw fixing
• Length: 3.5 mm• Manufactured in compliance with DIN 7956
Order referenceAlso available in fixed lengths
• Flange thickness: 0.7 mm (width open 40 mm: 0.8 mm)• Barrel Ø: 3.3 mm (width open 40 mm: 3.5 mm)• Version: Rolled• Material: Steel pin
• Flange thickness: 0.8 mm• Barrel Ø: 3.5 mm• Version: Rolled• Material: Brass pin
• Flange thickness: 0.8 mm• Barrel Ø: 3.5 mm• Version: Rolled• Material: Stainless steel pin
• Flange thickness: 1.0 mm• Barrel Ø: 3.8 mm• Version: Without groove• Material: Aluminum pin
Steel
Rustproof stainless steel, quality 1.4016
Aluminum
Brass
Open width B mm
Finish Cat. No.
20 Brass plated 351.01.501
Nickel plated 351.01.707
25 Brass plated 351.01.510
Nickel plated 351.01.716
32 Brass plated 351.01.538
Brass color lacquered 351.00.531
Nickel plated 351.01.734
Burnished 351.01.136
40 Brass plated 351.01.547
Packing: 3.5 m
Open width B mm Finish Cat. No.
32 Polished 351.03.836
Open width B mm Finish Cat. No.
32 Bright 351.20.837
Open width B mm Cat. No.
32 351.04.039
Packing: 3.5 m
Packing: 3.5 m
Packing: 3.5 m
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.70
3
Pivot Hinges
Corner pivot hinge Pivot hinge for writing bureau• Material: Brass• Opening angle restraint: Without stop• Installation: For screw fixing• Outer knuckle
• Opening angle: 250°• Finish: Polished• Plange thickness: 2 mm
• Area of application: From drop-down worktop flap• Opening angle: 90°• Material: Brass• Finish: Polished• Flange thickness: 3/3 or 4/5 mm• Opening angle restraint: With stop at 90° opening• Version: With one short flange• Installation: For screw fixing
• Opening angle: 180°• Finish: Matt• Plange thickness: 4 mm
Straight
Straight
Length Cat. No.
50 mm 351.20.803
Length mm Thickness mm Cat. No.
80 3 361.50.802
150 5 361.50.820
Length Cat. No.
70 mm 362.01.500
Application
Order referencePlease use chipboard screws Ø 3.0 mm for length 80 mm and chip-board screws with Ø 4.0 mm for length 150 mm.
Packing: 3.5 m
Packing: 3.5 m
Packing: 3.5 m
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.71
3
Pivot Hinges
Function
Removing the door:Lift the spring loaded pin with ascrewdriver.Condition: Drilled hole in door and slottedhole in sleeve must be alignment.
Setting the door gap:Widen or reduce door gap by turning theflange. Fix adjusted door gap with a small chipboard screw.
Application
Pivot hinge
• Material: Brass• Opening angle restraint: Without stop• Installation: For screw fixing• Outer knuckle
• Opening angle: 140°• Material: Plastic• For door thickness: 12 – 21 mm• Opening angle restraint: Without stop• Installation: For press fitting
Color Cat. No.
White 361.22.710
Brown 361.22.110
Black 361.22.310
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.72
3
Hinges for Concealed Fixing
Vici HingeFor wood thicknesses from 19 mm
HingesFor wood thicknesses from 18 – 26 mm
• Opening angle: 180°• Material: Zinc alloy housing, Brass link• Installation: For screw fixing
• Opening angle: 180°• Material: Steel• Finish: Brass plated• Installation: For screw fixing
Finish Cat. No.
Nickel plated housing 341.25.712
Brass plate housing 341.25.516
For wood thicknessmm
Packingpieces
Cat. No.
18-20 140 341.05.500
14-16 341.05.510
19-21 100 341.05.521
24-26 30 341.05.530
Drilling Dimensions
Drilling pattern
Application and planning dimensions
For wood thickness mm
18 – 20 14 – 16 19 – 21 24 – 26
Screw mm 4,0 4,0 4,0 4,5Dim A mm 12,0 10,0 13,0 18,0
Dim B mm 39,0 42,0 65,0 79,0
Dim C mm 12,0 16,0 20,0 28,0
Dim D mm 1,5 1,8 2,0 2,5
Dim E mm 15,5 14,0 18,0 21,5
Gap F mm 24,0 19,0 23,0 29,0
Gap G mm 4,0 2,0 3,0 3,5
Gap H mm 4,0 5,0 4,0 4,0
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.73
3
For wood thick-nessmm
Finish PackingPieces
Cat. No.
13 - 16 Brass Plated 1 or 24 341.07.518
Nickel Plated 1 or 24 341.07.718
19 - 24 Brass Plated 1 or 24 341.07.527
Nickel Plated 1 or 24 341.07.727
19 - 25 Brass Plated 1 or 12 341.07.536
Nickel Plated 1 or 12 341.07.736
22 - 26 Brass Plated 1 or 4 341.07.545
Nickel Plated 1 or 4 341.07.745
28 - 34 Brass Plated 1 or 2 341.07.554
Nickel Plated 1 or 2 341.07.754
35 - 38 Brass Plated 1 or 2 341.07.563
Nickel Plated 1 or 2 341.07.763
Hinge Soss
Drilling pattern
• Opening angle: 180°• Material: Zinc alloy housing, links: Steel• Version: For wood thicknesses 41 – 51 mm, link with plastic slide plates• Installation: For screw fixing• Fixing material supplied
Reference table for calculating the number of required door hingesExample:A door 700 mm wide that weighs 45 kg and has a thickness of 41 mm would require three concealed hinges Cat. No. 341.07.572 or 341.07.772.
s
Application and planning dimensions
For wood thicknessmm
13 – 16
19 – 24
19 – 25
22 – 26
28 – 34
35 – 38
41 – 45
48 – 51
Dim. A mm
9.6 13.0 13.0 15.9 19.0 25.4 28.6 35.0
Dim. B mm
43.0 44.5 60.3 69.0 95.3 117.5 117.5
Dim. C mm
22.0 19.0 31.5 34.0 52.1 65.3 62.5 74.2
Dim. D mm
5.5 5.0 6.4 7.0 12.0
Dim. E mm
6.0 13.1 12.0 15.6 17.8 24.3 30.0 39.1
Gap F mm
17.0 21.1 21.8 27.2 32.5 43.7 50.8
Gap G mm
2.4 3.2 3.2 4.0 4.8 6.4 6.4
Gap H mm
2.7 2.7 2.7 3.5 4.0 5.5 9.5
12.0
12.0
62.2
140.0
9.5 10.3
7.5
Hinges for Concealed Fixing
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.74
3
Vici Super HingeFor wood thicknesses from 12 mm
HingeFor wood thicknesses from 24 mm
HingeFor wood thicknesses from 16 mm
Drilling pattern
Drilling pattern
Drilling pattern
Color Finish Cat. No.:
Brass link
White housing Nickel plated link 341.04.701
Brown housing Bronzed link 341.04.101
Black housing Burnished link 341.04.301
Steel link
White housing Galvanized link 341.04.700
Brown housing Yellow chromatized link 341.04.100
Finish Color Cat. No.:
Galvanized link White housing 341.04.710
Drilling pattern
• Opening angle: 180°• Material: Plastic housing, brass link• Finish: Brass plated• Installation: For screw fixing
• Opening angle: 180°• Material: Plastic housing, steel link• Finish: Galvanized link• Installation: Expanding by turning the screw
• Opening angle: 180°• Material: Plastic housing, brass or steel link• Installation: For screw fixing
Color Cat. No.
Black 341.00.322
Brass link
Steel link
Hinges for Concealed Fixing
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.75
3
• Opening angle: 180°• Material: Brass• Finish: Matt• Mounting: For right and left hand use• Installation: Screw fixing
Mounting example for butting overlay doors
Mounting example for butting inset doors
Mounting example for butting overlay flaps
Example of folding door
Drilling dimensions
Installation• Position is secured by tightening the tensioning screw• With extremely heavy loads, each of the cylinders can be secured from the front using a chipboard or wood screw
Application
Door closed
Side Side
Door
Hinge
Door
Hinge
Door open
Door closed
Side Side
Door
Hinge
Door
Hinge
Door open
Flap closed
Shelf
Flap
Hinge
Shelf
Hinge Flap
Flap open
Panel closed Panel open
Mounting example for two panels
Drilling dimensions
Drill hole
Zysa HingeFor wood thicknesses 14 – 40 mm
Application and planning dimensionsFor wood thickness mm
14 – 19 17 – 22 20 – 26 22– 28
Screw mm 2.5 3.0 3.5 3.5 4.0 4.5
Length L mm 11.0 13.5 15.5 16.5 17.5 25.0
Drill hole mm 10.0 12.0 14.0 16.0 18.0 24.0
Drilling depth T mm 11.0 13.5 15.5 16.5 17.5 25.0
Dim A mm 16.5 20.0 23.0 25.0 27.0 36.5
Dim B mm 2.0 2.2 3.0 3.0 3.0 3.5
Gap F mm 2.5 3.5 3.0 3.0 3.0 3.5
24– 32 31– 40
For wood thicknessmm
Packingpieces
Cat. No.
14 – 19 48 341.22.506
17 – 22 341.23.503
20 – 26 24 341.13.507
22 – 28 341.11.503
24 – 32 24 341.12.500
31 – 40 12 300.14.504
Hinges for Concealed Fixing
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.76
3
Dim. Lmm
Dim. L1mm
Number ofdrillings
Finish Packing pieces
Cat. No.
41 23 6 Polish nickel plated
20 341.26.701
Matt 20 341.26.501
52 34 8 Polish nickel plated
20 341.26.702
Matt 20 341.26.502
88 70 8 Polish nickel plated
10 341.26.703
Matt 10 341.26.503
Dim. Lmm
Dim. L1mm
Finish Cat. No.
39 23 Polish nickel plated 341.27.700
Matt 341.27.500
• Opening angle: 180°• Material: Brass• Installation: Screw fixing
• Opening angle: 180°• Material: Brass• Installation: Screw fixing
Sepa HingeFor wood thicknesses from 24 mm
Sepa HingeFor wood thicknesses from 24 mm
Installation
Drilling pattern
Installation
Drilling pattern
Hinges for Concealed Fixing
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.77
3
GS 22.5 and GS 45 Mitred Hinge
Mitred HingesFor designer doors
Adjustment facility
Height adjustment 3 mm,width and depth adjustment 1.5 mm
Door Mounting
closed
Drilling pattern 22.5 mitre°cut
Door open
The only hinge that can be used for furniture structureswith mitred cabinet corners and door.The mitred hinge is not visible from outside whenthe door is closed.
Application example GS 45° mitred hinge
• Material: Zinc alloy cup, steel hinge arm• Finish: Nickel plated• For door thickness: 16 – 22 mm• Side panel thickness: 16 – 20 mm, from 20 mm and above the edge has to be chamfered by 3 mm• Adjustment facility: 3-dimensional• Installation: For screw fixing
Door Mounting
Flap Cabinet
closed
35 3552 52
5.5 7 713.5 5.5 13.5
Door open
Drilling pattern 45 mitre°cut
GS 22.5 Mitred Hinge
GS 45 Mitred Hinge
Opening angle Cat. No.
120° 325.00.726
Opening angle Cat. No.
135° 325.00.708
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.78
3
Glass door hinge
Glass Door HingesWithout glass drilling
Full overlay mounting
• Material: Zinc alloy cup• For door height: max. 600 mm• For door width: max. 450 mm• For glass thickness: max. 5 mm• Adjustment facility: Depth and side adjustment• Installation: For screw fixing to side panel, for direct fixing to glass door• With spring• No drilling in glass necessary
• Area of application: For overlay glass doors• Hinge arm: Cranked• Adjustment facility: Depth adjustment with slot• Can be fixed with additional third screw
• Area of application: For inset glass doors• Hinge arm: Straight• Adjustment facility: Height adjustment with slot
• Area of application: For inset glass doors• Adjustment facility: Depth and side adjustment• With spring
Opening angle 170°
Finish Cat. No.
Chrome plated polished 361.93.241
Nickel plated polished 361.93.641
Brass plated polished 361.93.841
Finish Cat. No.
Chrome plated polished 361.93.240
Nickel plated polished 361.93.640
Brass plated polished 361.93.840
Finish Cat. No.
Chrome plated polished 361.93.242
Nickel plated polished 361.93.642
Brass plated polished 361.93.842
Installation
Supplied with
Plastic spacer plate
Installation
Full overlay mounting
Inset mounting
Center hinge only in combination with hinge for inset mounting,For door height of 600 mm
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.79
3
Simplex Glass Door Hinge Simplex-Clip Glass Door HingeFor direct fixing without tools
Glass Door HingesFor hifi furniture
Opening angle 110° Opening angle 110°
Installation
Installation
• Area of application: For inset glass doors• Material: Steel, plastic cup• For door height: max. 600 mm• For door width: max. 400 mm• For glass thickness: max. 4.7 mm• Version: With cup• Adjustment facility: Depth and side adjustment• Installation: For plug fitting into base panel, for direct fixing to glass door with screw• Without spring• No drilling in glass necessary
• Area of application: For inset glass doors• Material: Steel, plastic cup and clips• For door height: max. 600 mm• For door width: max. 400 mm• For glass thickness: max. 5.0 mm• Version: With cup• Adjustment facility: Depth and side adjustment• Installation: For plug fitting into base panel, for direct fixing to glass door with screw• Without spring• No drilling in glass necessary
Inset mountingInset mounting
Finish Cat. No.
Hinge: Chrome plated polished, cup: Black 361.42.202
Hinge: Black matt, cup: Black 361.42.300
Finish Cat. No.
Hinge: Chrome plated polished, cup and clip: Black
361.42.221
Hinge: Black matt, cup and clip: Black 361.42.321Packing: 1 piecePacking: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.80
3
Mounting Description Model Flap height Flap weight
• Flap is held reliably in any position• For two-piece flaps• Gentle closing• With hinge connection• Auto-stop• Easy installation• Low installation depth
(Senso and E-Senso)
Senso 3674 up to 900 mm up to 24.5 kg
E-Senso 3686 (electric) up to 900 mm up to 22.0 kg
Fold 3672 up to 840 mm up to 16.2 kg
Double flap lift up fitting
• Flap is held reliably in any position• Without hinge connection• Soft close possible• Easy installation
Free 3677 up to 700 mm up to 17.0 kg
Stay flap fitting
• Flap is held reliably in any position• For one-piece flaps• Flap swings up above the cabinet top• Gentle closing• Without hinge connection• Easy installation• Low installation depth (Verso and E-Verso)
Maxi swing soft 3676 up to 800 mm up to 14.0 kg
Verso 3684 up to 800 mm up to 17.0 kg
E-Verso 3687 (electric) up to 800 mm up to 18.0 kg
Swing up front fitting
• Parallel upwards action• Gentle closing• Without hinge connection• Easy installation• Low installation depth
Strato 3685 up to 650 mm up to 16.0 kg
E-Strato 3688 (electric) up to 650 mm up to 14.0 kg
up to 8.0 kg
Parallel lift up front fitting
• Holds the flap reliably in any position• With hinge connection• Easy installation
Duo 3667 up to 500 mm up to 15.0 kg
Duo forte 3666 up to 700 mm up to 15.0 kg
Maxi 3675 overview
Maxi 3675 up to 1000 mm up to 13.6 kg
Maxi Touch opening 3675 up to 1000 mm up to 27.3 kg
Lid stays Maxi 3675 up to 1000 mm up to 15.0 kg
• Flap function in combination with flap hinges
Duo 3667 up to 500 mm up to 15.0 kg
Duo forte 3666 up to 700 mm up to 15.0 kg
Flap stays
• Lid is held reliably in any position• With hinge connection• Easy installation
Maxi up 3675 up to 600 mm up to 18.8 kg
Lid stays specially for chests
Flap FittingsDouble flap lift up fitting
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.81
3
Senso 3674 Complete set,For two-piece flapsmade of wood or with aluminum frame
Flap FittingsDouble flap lift up fitting
Adjustment facility
Installation
Installation dimensions
Supplied with1 Double flap lift up fitting2 Screw-on brackets for wooden flaps or flaps with aluminium frame,
from frame width 45 mm1 Set of installation instructions
Packing: 1 set
Order referenceScrew-on brackets, adapters for 20 mm aluminium profiles and connecting hinge are not supplied. Please order separately.Special models with 2/3 and 1/3 flap heights possible on request.
Flap made of wood
• Material: Fitting: Steel, aluminium, cover cap: Plastic
• Finish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006
• Screw-on brackets for wood supplied
Height adjustment ±3 mm
Side adjustment±3 mm
Holding power adjustment
Opening angle adjustment
Centre pull adjustment
kg
+ -
Flap height mm
D H R T U V W
550 101° 57.5 290 63.5 70 139 192 390
600 101° 73.5 326 79.5 70 130 170 405
650 103° 67.5 340 73.5 95 160 220 425
720 102° 75.5 378 81.5 96 207 261 456
800 100° 71.5 392 77.5 85 255 260 500
865 102° 47.5 400 53.5 120 260 315 525
Flap heightmm
Flap weightkg
Cat. No.
550 (540 – 580) 3.0 – 6.5 372.64.6016.0 – 12.0 372.64.6029.0 – 18.0 372.64.60312.0 – 24.5 372.64.604
600 (580 – 640) 3.0 – 6.0 372.64.6116.0 – 11.0 372.64.6129.0 – 17.0 372.64.61312.0 – 23.0 372.64.614
650 (640 – 700) 3.0 – 5.5 372.64.6215.5 – 10.0 372.64.6228.0 – 16.0 372.64.62310.5 – 21.5 372.64.624
720 (700 – 780) 3.5 – 5.5 372.64.6315.0 – 9.0 372.64.6327.0 – 15.0 372.64.6339.0 – 20.0 372.64.634
800 (780 – 840) 5.0 – 9.0 372.64.6427.0 – 13.0 372.64.6439.0 – 17.0 372.64.644
865 (840 – 900) 5.5 – 12.0 372.64.6537.5 – 16.0 372.64.654
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.82
3
Flap FittingsElectric double flap lift up fitting
Senso 3674 Double flap lift up fitting,individual component
E-Senso 3686 (electric) Complete setFor two-piece flapsmade of wood or with aluminum frame
Supplied with1 Double flap lift up fitting1 Set of installation instructions
Packing: 1 set
Order referenceAll accessories must be ordered separately.
Adjustment facility
• Material: Fitting: Steel, aluminium, cover cap: Plastic
• Finish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006
Flap heightmm
Flap weightkg
Cat. No.
550 (540 – 580) 3.0 – 6.5 372.64.9016.0 – 12.0 372.64.9029.0 – 18.0 372.64.90312.0 – 24.5 372.64.904
600 (580 – 640) 3.0 – 6.0 372.64.9116.0 – 11.0 372.64.9129.0 – 17.0 372.64.91312.0 – 23.0 372.64.914
650 (640 – 700) 3.0 – 5.5 372.64.9215.5 – 10.0 372.64.9228.0 – 16.0 372.64.92310.5 – 21.5 372.64.924
720 (700 – 780) 3.5 – 5.5 372.64.9315.0 – 9.0 372.64.9327.0 – 15.0 372.64.9339.0 – 20.0 372.64.934
800 (780 – 840) 5.0 – 9.0 372.64.9427.0 – 13.0 372.64.9439.0 – 17.0 372.64.944
865 (840 – 900) 5.5 – 12.0 372.64.9537.5 – 16.0 372.64.954
• Electric opening and closing system for flaps• Programmable push-button sender for opening and closing
the flap• Push-button sender suitable for operating several flap fittings• Quiet drive and soft closing action• Operating the flap in case of power failure possible with
increased amount of effort• Flap can be operated without additional power assistance• Obstacle detection with auto-stop on both sides
• Material: Fitting: Steel, aluminium, cover cap: Plastic
• Finish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006
• Nominal voltage: 18 V• Input voltage: 100 – 240 V, 50 – 60Hz
Height adjustment ±3 mm
Side adjustment ± 3 mm
Holding power adjustment
Opening angle adjustment
Centre pull adjustment
kg
+ -
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.83
3
Flap FittingsElectric double flap lift up fitting
Senso 3686 (electric) Complete setFor two-piece flapsmade of wood or with aluminum frame
Installation
Installation dimensions
Supplied with1 Push-putton sender with battery1 Connecting cable (length 2000 mm) with
angled Euro plug/male adapter 1 Control unit with female adapter1 Allen key 4 mm2 Fittings with cover caps2 Base plates2 screw-on brackets for wooden doors and wide aluminium frames2 Connecting cables fo r drives/control unit4 Screws M5 x 16 mm1 Set of installation and operating instructions
Packing: 1 set
Order referenceScrew-on brackets, adapters for aluminium profiles and connecting hinges are not supplied. Please order separately.
Push-button sender for recess installation in 35 mm cup drilling
The push-button sender can be recess mounted in the furniture.
Flap height mm
D H R T U V W
540 – 580 101° 57.5 290 63.5 70 139 192 390
580 – 640 101° 73.5 326 79.5 70 130 170 405
640 – 700 103° 67.5 340 73.5 95 160 220 425
700 – 780 102° 75.5 378 81.5 96 207 261 456
780 – 840 100° 71.5 392 77.5 85 255 260 500
840 – 900 102° 47.5 400 53.5 120 260 315 525
Flap heightmm
Flap weightkg
Cat. No.
555 (540 – 580) 2.5 – 6.5 372.64.801555 (540 – 580) 6.0 – 11.0 372.64.802555 (540 – 580) 9.5 – 18.0 372.64.803555 (540 – 580) 13.0 – 22.0 372.64.804600 (580 – 640) 2.5 – 6.0 372.64.811600 (580 – 640) 5.5 – 10.0 372.64.812600 (580 – 640) 7.5 – 17.0 372.64.813600 (580 – 640) 12.0 – 21.0 372.64.814650 (640 – 700) 3.0 – 5.5 372.64.821650 (640 – 700) 5.5 – 9.0 372.64.822650 (640 – 700) 7.0 – 14.5 372.64.823650 (640 – 700) 10.5 – 18.5 372.64.824720 (700 – 780) 3.0 – 5.0 372.64.831720 (700 – 780) 4.5 – 8.0 372.64.832720 (700 – 780) 7.0 – 14.0 372.64.833720 (700 – 780) 9.0 – 16.5 372.64.834800 (780 – 840) 4.5 – 8.0 372.64.841800 (780 – 840) 7.0 – 11.0 372.64.842800 (780 – 840) 9.0 – 14.0 372.64.843865 (840 – 900) 5.0 – 10.0 372.64.851865 (840 – 900) 7.0 – 12.0 372.64.852
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.84
3
Senso 3674 and E-Senso 3686 accessories
Screw-on bracket with round holeFor wooden flaps or flaps with aluminum frame,from frame width 45 mm
Flap FittingsDouble flap lift up fitting
Adapter for aluminum profileFor screw fixing to screw-on bracket Cat. No. 372.64.991
Area of application: For mounting the double flap lift up fittingMaterial: Plastic
FinishSilver coloured, similar to RAL 9006
Packing: 1 or 10 pieces
372.64.990Cat. No.
Area of application: For mounting the double flap lift up fittingMaterial: Plastic
ColourGrey, similar to RAL 9006 372.64.991
Cat. No.
Packing: 1 or 10 pieces
Order referencePlease order separately for aluminium frameCat. No. 372.64.995.
Packing: 1 or 10 pieces
Area of application: For wooden flaps and flaps with aluminium frame, from frame width 20 mmMaterial: Zinc alloyFinish: Nickel plated
Order referencePlease order screw-on bracket Cat. No. 372.64.991 separately.
FinishNickel plated 372.64.995
Cat. No.
Packing: 1 or 10 pieces
Drilling pattern
Area of application: For right and left hand useMaterial: Zinc alloy
Version Function Installation Cat. No.
With Not With 372.64.795 guide pin adjustable Varianta special screw With chipboard screws
372.64.790
372.64.792
372.64.793
372.64.794
372.64.791
Without Not With guide pin adjustable Varianta special screws With chipboard screws
Adjustable With Varianta special screwsWithout Adjustable With guide pin chipboard screws
Screw-on bracket with slot,For flaps with aluminum frame, frame width 20 mm
Connecting hinge
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.85
3
Flap FittingsDouble flap lift up fitting
Fold 3672 individual componentFor two-piece flapsmade of wood or with aluminum frame
Adjustment facility
Installation
Supplied with1 Double flap lift up fittingInstallation instructions
NoteThe double flap lift up fitting can be used on one side up to a cabinet width of 600 mm and a flap weight of 5 kg.
Packing: 1 or 10 pieces
Order referencePlease order mounting bracket and centre hinge separately.
Flap with aluminium frame
• Material: Housing and hinged lever: Steel, cover cap: Plastic
• Finish: Housing: Galvanized, hinged lever: Plastic coated white aluminium, similar to RAL 9006, cover cap: Grey-white, similar to RAL 9002
• Version: Spiral spring• Installation: For screw fixing• Mounting: With 120° concealed hinges
Height adjustment ±2 mm
Side adjustment +3/-1 mm
Tilt adjustment ±1.5 mm
Pull adjustment with SW4 Allen key
kg
Flap height mm
Flap weight kg
Mounting Grey white White aluminium
600 (590–630) 6.0–6.7 Right 372.64.701 372.64.201Left 372.64.702 372.64.202
6.8–8.1 Right 372.64.703 372.64.203Left 372.64.704 372.64.204
8.2–10.0 Right 372.64.705 372.64.205Left 372.64.706 372.64.206
10.1–13.0 Right 372.64.707 372.64.207Left 372.64.708 372.64.208
13.1–16.0 Right 372.64.709 372.64.209Left 372.64.710 372.64.210
720 (700–750) 5.3–6.5 Right 372.64.721 372.64.221Left 372.64.722 372.64.222
6.6–8.7 Right 372.64.723 372.64.223Left 372.64.724 372.64.224
8.8–11.0 Right 372.64.725 372.64.225Left 372.64.726 372.64.226
11.1–13.3 Right 372.64.727 372.64.227Left 372.64.728 372.64.228
13.4–14.8 Right 372.64.729 372.64.229Left 372.64.730 372.64.230
800 (780–840) 5.0–6.1 Right 372.64.741 372.64.241Left 372.64.742 372.64.242
6.2–8.0 Right 372.64.743 372.64.243Left 372.64.744 372.64.244
8.1–10.0 Right 372.64.745 372.64.245Left 372.64.746 372.64.246
10.1–12.5 Right 372.64.747 372.64.247Left 372.64.748 372.64.248
12.6–13.5 Right 372.64.749 372.64.249Left 372.64.750 372.64.250
CDE
228.5108.5
37
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.86
3
Flap FittingsDouble flap lift up fitting
• Area of application: For mounting the double flap lift up fitting to wooden flaps or flaps with aluminium frame, from frame width 45 mm
• Material: Steel, plastic cover cap
• Area of application: For mounting the double flap lift up fitting to flaps with aluminium frame, frame width 20 mm
• Material: Steel, plastic cover cap
• Area of application: For wooden flaps and flaps with aluminium frame, from frame width 20 mm
• Material: Zinc alloy• Finish: Nickel plated
Fold 3672 Accessories Connecting hinge
For flaps with aluminum frame, frame width 20 mm
Mounting Grey white Grey
Right 372.64.773 372.64.771
Left 372.64.774 372.64.772
Mounting Grey white Grey
Right 372.64.783 372.64.781
Left 372.64.784 372.64.782
Version Function Installation Cat. No.
Withguide pin
Notadjustable
With Varianta special screw
372.64.795
With chipboard screws
372.64.790
Withoutguide pin
Notadjustable
With Varianta special screw
372.64.792
With chipboard screws
372.64.793
Adjustable With Varianta special screw
372.64.794
With chipboard screws
372.64.791
Mounting bracketFor wooden flaps or flaps with aluminum frame,from frame width 45 mm
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.87
3
Flap FittingsStay flap fitting
Free 3677 Complete setFor two-piece flapsmade of wood or with aluminum frame
Installation
Adjustment facility
Sample measurements table for max. flap weight
Supplied with2 Stay flap fittings (left/right)2 Cover caps for fitting2 Mounting brackets (left/right)2 Cover caps for mounting bracketsInstallation instructions
Packing: 1 set
→ Free 3677 AccessoriesAdapter for 20 mm aluminium profile
Packing: 2 pieces
• Area of application: For wooden flaps and flaps with aluminium frame
• Opening angle: 90 or 100• Material: Fitting: Steel,
cover cap: Plastic• Finish: Fitting: Nickel plated,
cover cap: Grey, RAL 9006• Installation: Fitting for screw fixing,
flap without tools (clip system) onto pre-mounted mounting bracket
• Hinges not required• Flap locks in any position• With soft close
Height adjustment +1/-1.5 mm
Side adjustment +1/-1.5 mm
Tilt adjustment
Holding poweradjustment
+- kg
Model A B C D E F
Flap height mm
Flap weight kg
250 2.4 – 4.0
4.6 – 8.2
7.0 – 12.0
9.4 – 16.4
– –
400 1.5 – 2.5
3.0 – 5.0
4.4 – 7.6
5.9 – 10.2
8.7 – 14.1
–
500 – 2.3 – 4.1
3.5 – 6.1
4.7 – 8.2
7.0 – 11.3
10.4 – 17.0
600 – – – 3.9 – 6.8
5.8 – 9.4
8.6 – 14.0
700 – – – 3.3 – 5.8
5.0 – 8.1
7.4 – 12.1
Model Opening angle90° 100°
A 372.91.521 372.91.511B 372.91.522 372.91.512C 372.91.523 372.91.513D 372.91.524 372.91.514E 372.91.525 372.91.515F 372.91.526 372.91.516
• Material: Zinc alloy• Mounting: Suitable for left hand and right hand use
Finish Side panel thicknessmm
Cat. No.
Chrome plated 16 372.91.59119 372.91.592
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.88
3
Adjustment facility
Installation
Sample measurements table for max. flap weight
Supplied with2 Swing up front fittings (left/right)2 Cover caps for fitting2 Cover caps for mounting bracketsInstallation instructions
Packing: 1 set
Supplied withIncluding 12 fixing screws.
Packing: 2 pieces
• Area of application: For wooden flaps or flaps with aluminium frame
• Material: Fitting: Zinc alloy, steel, cover cap: Plastic
• Finish: Fitting: Nickel plated, cover cap: Grey, RAL 9006
• Installation: Fitting for screw fixing, flap without tools (clip system) onto pre-mounted mounting bracket
• Hinges and cross bar not required• Flap locks in any position• With soft close
Height adjustment ±2 mm
Side adjustment +3/-1 mm
Tilt adjustment ±1.5 mm
Holding poweradjustment with SW10 Allen key
+- kg
Model A B C D
Flap height mm Flap weight kg
350 2.0 – 4.0 4.0 – 9.0 – –
450 2.0 – 4.0 4.0 – 8.0 6.5 – 11.0 –
600 1.9 – 3.4 3.4 – 5.5 5.5 – 9.0 8.0 – 14.0
700 – 3.0 – 4.5 4.5 – 7.5 7.5 – 11.0
800 – – 4.5 – 7.0 7.0 – 10.0
Model With soft close Without soft closeA 372.92.201 372.92.211B 372.92.202 372.92.212C 372.92.203 372.92.213D 372.92.204 372.92.214
• Material: Zinc alloy• Mounting: Suitable for left hand and right hand use
Finish Cat. No.Chrome plated matt 372.91.590
Flap FittingsSwing up front fitting
Maxi Swing Soft 3676 Complete setFor one-piece flapsmade of wood or with aluminum frame
Swing Soft 3676 AccessoriesAdapter for 20 mm aluminum profile
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.89
3
Adjustment facility
Installation
Supplied with1 Swing up front fitting2 Cover caps2 Screw-on brackets1 Set of installation instructions
Packing: 1 set
Order referencePlease order mounting brackets for aluminium profile and cross bar separately.
Screw-on brackets for wood supplied.
• Material: Fitting: Steel, cover cap: Plastic
• Finish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006
Height adjustment ±3 mm
Side adjustment ±3 mm
Tiltadjustment
Holding power adjustment
Opening angle adjustment
+-
kg
Model A B C D
Flap height mm Flap weight kg
420 – 550 2.0 – 4.0 4.0 – 8.0 6.0 – 10.0 8.0 – 17.0
550 – 650 2.0 – 3.5 3.5 – 7.0 6.0 – 10.0 9.0 – 16.0
650 – 800 – 3.0 – 6.5 5.0 – 10.0 9.0 – 15.0
Model Cat. No.A 372.67.901B 372.67.902C 372.67.903D 372.67.904
Flap FittingsSwing up front fitting
Verso 3684 Complete setFor one-piece flapsmade of wood or with aluminum frame
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.90
3
Flap FittingsElectric swing up front fitting
E-Verso 3687 (electric) Complete setFor one-piece flapsmade of wood or with aluminum frame
Adjustment facility
Installation
• Electric opening and closing system for flaps• Programmable push-button sender for opening and closing
the flap• Push-button sender suitable for operating several flap fittings• Quiet drive and soft closing action• Operating the flap in case of power failure possible with
increased amount of effort• Flap can be operated without additional power assistance• Obstacle detection with auto-stop on both sides
• Material: Fitting: Steel, aluminium, cover cap: Plastic
• Finish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006
• Nominal voltage: 18 V• Input voltage: 100 – 240 V, 50 – 60Hz
Height adjustment ±3 mm
Side adjustment ±3 mm
Tilt adjustment
Holding power adjustment
Opening angle adjustment
+-
kg
Push-button sender for recess installation in 35 mm cup drilling
The push-button sender can be recess mounted in the furniture.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.91
3
Supplied with:
1 Push-button sender with battery1 Connecting cable (length 2000 mm)
with angled Euro plug/male adapter 1 Control unit with female adapter1 Allen key 4 mm2 Fittings with cover caps2 Base plates2 Screw-on brackets for wooden doors and wide aluminium frames2 Connecting plates left/right2 Adjusting parts2 Cam follower left/right2 Connecting cables for drives/control unit4 Screws M5 x 16 mm1 Set of installation and operating instructions
Packing: 1 set
Order referencePlease order mounting brackets for 20 mm wide aluminium frames and cross bar separately.
Screw-on brackets for wood supplied.
Installation
Packing: 2 pieces
Cross bar
Packing: 1 piece
Model A B C D
Flap height mm
Flap weight kg
420 2.0 – 5.0 4.0 – 9.0 6.0 – 12.0 10.0 – 18.0
500 2.0 – 4.5 4.0 – 8.0 6.0 – 14.0 8.0 – 16.0
600 2.0 – 4.5 4.0 – 8.0 6.0 – 11.0 8.0 – 15.0
700 – 3.5 – 6.5 6.0 – 10.0 8.5 – 14.0
800 – 3.0 – 5.5 5.0 – 9.5 8.0 – 12.0
Model Cat. No.A 372.67.931B 372.67.932C 372.67.933D 372.67.934
• Area of application: For mounting the swing up front fitting to flaps with aluminium frame, frame width 20 mm
• Material: Steel• Finish: Nickel plated
Suitable for Height H Cat. No.mm
Side panel thickness 16 mm
16 372.67.795
Side panel thickness 19 mm
19 372.67.796
• Area of application: For connecting both fitting components• Material: Aluminium• Finish: Silver coloured anodized
Suitable for Side panel thickness W
Length Cat. No.
mm mmFlap width 600 mm
16/19 477 372.67.983
Flap width 900 mm
16/19 777 372.67.985
Flap width 1200 mm
16/19 1077 372.67.987
Flap width 1500 mm
16/19 1377 372.67.989
Flap width 1800 mm
16/19 1677 372.67.990
Flap FittingsElectric swing up front fitting
Verso 3674 and E-Senso 3687 accessoriesMounting brackets for flaps with aluminum frame,frame width 20 mm
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.92
3
Material: Fitting: Steel, cover cap: PlasticFinish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006Integrated soft close
••
•
Adjustment facility
Heightadjustment 3 mm
Sideadjustment 3 mm
Tiltadjustment
Holding poweradjustment
Opening angleadjustment
Installation
Order reference
Please order screw-on brackets for aluminium profiles andcross bar separately.Screw-on brackets for wood supplied.
Supplied with
1 Parallel lift up front fitting2 Cover caps2 Screw-on brackets for wood1 Set of installation instructions
Installation dimensions
Flapheightmm
X Y D H K R S T U V ca. ca. ca.
342 - 342 186 308 295 205 28 0.8 333 200 50420
350 186 308 295 205 38 0.8 346 200 50
420 186 308 295 205 98 0.8 416 200 50
420 255 380 395 271 5 1.2 414 265 37420 -500
500 -550
550 -650
450 255 380 395 271 35 1.2 444 265 37
500 255 380 395 271 85 1.2 494 265 37
500 293.5 420 450 312.5 30 1.3 494 265 37
550 293.5 420 450 312.5 80 1.3 544 295 37
550 313.5 440 480 332.5 50 1.3 544 315 37
600 313.5 440 480 332.5 100 1.3 594 315 37
600 313.5 440 480 332.5 150 1.3 644 315 37
Strato 3685 Complete setFor one-piece flapsmade of wood or with aluminum frame
Flap FittingsParallel lift up front fitting
Flap heightmm
Flap weightkg
Cat. No.
342 – 420 1.5 – 4.0 372.68.931
4.0 – 7.2 372.68.932
6.5 – 11.5 372.68.933
420 – 500 2.0 – 3.5 372.68.901
3.5 – 7.0 372.68.902
6.5 – 11.0 372.68.903
8.0 – 16.0 372.68.904
500 – 550 3.8 – 10.0 372.68.913
6.0 – 15.0 372.68.914
550 – 650 3.5 – 10.0 372.68.923
6.0 – 14.5 372.68.924Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.93
3
Strato 3688 (electric) Complete setFor one-piece flaps made of wood or with aluminum frame
Flap FittingsElectric parallel lift up front fitting
Adjustment facility
Installation
• Electric opening and closing system for flaps• Programmable push-button sender for opening and closing
the flap• Push-button sender suitable for operating several flap fittings• Quiet drive and soft closing action• Operating the flap in case of power failure possible with
increased amount of effort• Flap can be operated without additional power assistance• Obstacle detection with auto-stop on both sides
• Material: Fitting: Steel, aluminium, cover cap: Plastic
• Finish: Fitting: Silver coloured anodized, cover cap: Grey, similar to RAL 9006
• Nominal voltage: 18 V• Input voltage: 100 – 240 V, 50 – 60Hz
Height adjustment ±3 mm
Side adjustment ± 3 mm
Tilt adjustment
Holding power adjustment
Opening angle adjustment
+-
kg
Push-button sender for recess installation in 35 mm cup drilling
The push-button sender can be recess mounted in the furniture.28
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.94
3
Installation dimensions
Supplied with1 Push-button sender with battery1 Connecting cable (length 2,000 mm)
with angled Euro plug/male adapter 1 Control unit with female adapter1 Allen key 4 mm2 Fittings with cover caps2 Base plates2 Screw-on brackets for wooden doors and wide aluminium frames2 Connecting plates left/right2 Adjusting parts2 Cam follower left/right2 Connecting cables for drives/control unit4 Screws M5 x 16 mm1 Set of installation and operating instructions
Packing: 1 set
Order referencePlease order mounting brackets for 20 mm wide aluminium frames and cross bar separately.
Screw-on brackets for wood supplied.
Installation
Packing: 2 pieces
Packing: 1 piece
Flap height mm
X Y D ca.
H K R ca.
S T U ca.
342 – 420 342 186 308 295 205 28 0.8 333 200
350 186 308 295 205 38 0.8 346 200
420 186 308 295 205 98 0.8 416 200
420 – 500 420 255 380 395 271 5 1.2 414 265
450 255 380 395 271 35 1.2 444 265
500 255 380 395 271 85 1.2 494 265
500 – 550 500 293.5 420 450 312.5 30 1.3 494 295
550 293.5 420 450 312.5 80 1.3 544 295
550 – 650 550 313.5 440 480 332.5 50 1.3 544 315
600 313.5 440 480 332.5 100 1.3 594 315
600 313.5 440 480 332.5 150 1.3 644 315
Flap height Flap weight Cat. No.mm kg342 – 420 1.5 – 4.0 372.68.941342 – 420 3.5 – 7.0 372.68.942342 – 420 6.0 – 10.5 372.68.943420 – 500 2.0 – 3.5 372.68.951420 – 500 3.0 – 7.0 372.68.952420 – 500 6.0 – 10.5 372.68.953420 – 500 8.0 – 14.0 372.68.954500 – 550 3.8 – 9.0 372.68.961500 – 550 7.0 – 12.0 372.68.962550 – 650 4.5 – 10.0 372.68.971550 – 650 6.0 – 11.0 372.68.972
• Area of application: For mounting the parallel lift up front fitting to flaps with aluminium, frame width 20 mm
• Material: Steel• Finish: Nickel plated
Suitable for Height H Cat. No.mm
Side panel thickness 16 mm
16 372.67.795
Side panel thickness 19 mm
19 372.67.796
• Area of application: For connecting both fitting components• Material: Aluminium• Finish: Silver coloured anodized
Suitable for Side panel thickness W
Length Cat. No.
mm mmFlap width 600 mm
16/19 477 372.67.983
Flap width 900 mm
16/19 777 372.67.985
Flap width 1200 mm
16/19 1077 372.67.987
Flap width 1500 mm
16/19 1377 372.67.989
Flap width 1800 mm
16/19 1677 372.67.990
Flap FittingsElectric parallel lift up front fitting
Cross bar
Strato 3685 and E-Senso 3688 accessories
Mounting brackets for flaps with aluminum frame,frame width 20 mm
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.95
3
Flap FittingsParallel lift up front fitting – lid stay
Maxi 3675For flaps made of wood orwith aluminum frame
Model variants/mounting options
• For one-piece flaps made of wood or with aluminium frame, with handle
• Locks the flap reliably in any position and lets it gently slide downwards
• With power assisted opening
Maxi – edge distance 28/37 mm
• For one-piece flaps made of wood or with aluminium frame, without handle
• Locks the flap reliably in any position and lets it gently slide downwards
• Opening: A gentle push opens the flap slightly Closing: The flap is pushed back into the cabinet Stay closed feature: Magnet in the opening fitting and counterplate on the flap
• Handle drilling not required
Maxi Touch opening – edge distance 63 mm
• For one-piece flaps made of wood or with aluminium frame, with handle
• The Maxi fitting can also be used as classical version without "push-to-open" function for specific flap heights and weights by turning the screw-on bracket by 180° (screw-on bracket to the front) in flap direction. This reduces the opening resistance to a minimum.
• Locks the flap reliably in any position and lets it gently slide downwards
• Soft close• Trial mounting required
Maxi – edge distance 63 mm
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.96
3
Flap FittingsLid stay
Maxi 3675 Complete setFor flaps made of wood or with aluminum frame
Adjustment facility
Supplied with1 Lid stay1 Mounting bracket for cabinet, edge distance 28 or 37 mm1 Mounting bracket for wooden flap (wide aluminium frame) or
for 20 mm aluminium frameInstallation instructions
Packing: 1 or 10 pieces
Order referenceThe weight specification applies to one Maxi fitting. Order two Maxi fittings for flap widths from 600 mm and above.
• Opening angle: 75°, 90° or 110°• Material: Stay: Zinc alloy,
mounting bracket and screw-on bracket: Steel, cover cap for adjusting screw: Plastic
• Finish: Nickel plated, cover cap: Grey
• Colour: Model A: Grey, model B: Beige, model C: White, model D: Black
• Version: With power assisted opening• Mounting: Suitable for left hand and right hand use• Installation: Without tools (clip system) onto
pre-mounted mounting bracket• Distance from edge: 28 or 37 mm (optional)
Height adjustment ±2 mm
Side adjustment +3/-1 mm
Tilt adjustment ±1.5 mm
Holding power adjustment with SW10 Allen key
Adjusting the braking effect
kg
Construction dimensions
Angular bracket for mounting to wooden flaps
Screw-on bracket for mounting to aluminium frames
Model Distance from edgemm
Cat. No.
For wooden flaps and flaps with aluminium frame, from frame width 45 mmA 28 373.69.511
37 373.69.512B 28 373.69.411
37 373.69.412C 28 373.69.711
37 373.69.712D 28 373.69.311
37 373.69.312For flaps with aluminium frame, frame width 20 mmA 28 373.69.501
37 373.69.502B 28 373.69.401
37 373.69.402C 28 373.69.701
37 373.69.702D 28 373.69.301
37 373.69.302
716.5
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.97
3
• Locks the flap reliably in any position and lets it gently slide downwards
• With power assisted opening
Maxi 3675 complete set on page 18
Flap with aluminium frame Wooden flap
Model A B C D
Flap height Flap weight kg
300 mm 3.8 – 7.1 6.7 – 13.7 11.9 – 21.0 15.4 – 27.3
400 mm 2.8 – 5.3 5.0 – 10.3 8.9 – 15.8 11.6 – 20.5
500 mm 2.3 – 4.3 4.1 – 8.3 7.2 – 12.5 9.4 – 16.2
600 mm 1.9 – 3.5 3.3 – 7.0 5.9 – 10.6 7.6 – 13.7
700 mm 1.6 – 3.0 2.8 – 5.7 5.0 – 8.8 6.5 – 11.4
800 mm 1.4 – 2.7 2.5 – 5.1 4.4 – 7.9 5.7 – 10.4
900 mm 1.3 – 2.4 2.2 – 4.6 4.0 – 7.0 5.2 – 9.1
1000 mm 1.1 – 2.1 2.0 – 4.1 3.6 – 6.3 4.6 – 8.2
Flap with aluminium frame Wooden flap
Model A B C D
Flap height Flap weight kg
300 mm 3.0 – 5.3 5.1 – 10.2 9.1 – 15.8 11.9 – 20.8
400 mm 2.3 – 4.0 3.8 – 7.6 6.9 – 11.9 8.9 – 15.6
500 mm 1.8 – 3.2 3.1 – 6.1 5.5 – 9.6 7.2 – 12.5
600 mm 1.5 – 2.7 2.6 – 5.1 4.6 – 7.9 6.0 – 10.4
700 mm 1.3 – 2.2 2.1 – 4.2 3.8 – 6.6 4.9 – 8.7
800 mm 1.1 – 2.0 1.9 – 3.9 3.4 – 5.9 4.4 – 7.8
900 mm 1.0 – 1.8 1.7 – 3.4 3.0 – 5.2 3.9 – 6.9
1000 mm 0.9 – 1.6 1.5 – 3.0 2.7 – 4.7 3.6 – 6.2
Flap with aluminium frame Wooden flap
Model A B C D
Flap height Flap weight kg
300 mm 2.4 – 4.0 3.9 – 7.5 6.8 – 11.6 9.2 – 15.0
400 mm 1.8 – 3.0 2.9 – 5.6 5.1 – 8.7 6.9 – 11.2
500 mm 1.4 – 2.4 2.4 – 4.5 4.0 – 7.1 5.7 – 9.0
600 mm 1.2 – 2.0 1.9 – 3.8 3.3 – 5.9 4.5 – 7.6
700 mm 1.0 – 1.7 1.7 – 3.1 2.9 – 4.8 3.8 – 6.2
800 mm 0.9 – 1.4 1.4 – 2.8 2.6 – 4.3 3.4 – 5.6
900 mm 0.8 – 1.3 1.3 – 2.5 2.3 – 3.8 3.0 – 5.0
1000 mm 0.7 – 1.2 1.1 – 2.2 2.0 – 3.5 2.7 – 4.5
Flap FittingsLid stay
Maxi 3675 For one-piece flaps made of wood or with aluminum frame
With opening angle 75°
With opening angle 110°
With opening angle 90°
Choice of Maxi – edge distance 28/37 mm
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.98
3
Order referenceThe Maxi Touch opening fitting consists of Maxi 3675 lid stays, mounting brackets, magnetic door catches and counterplates.The weight specification applies to one Maxi fitting. Order two Maxi fittings for flap widths from 600 mm and above.
• Locks the flap reliably in any position and lets it gently slide downwards
• Opening: A gentle push opens the flap slightly Closing: The flap is pushed back into the cabinet Stay closed feature: Magnet in the opening fitting and counterplate on the flap
• Handle drilling not required
Model A B C D
Flap height Flap weight kg
75° 300 mm 2.0 – 3.8 4.0 – 7.7 7.0 – 14.0 –
400 mm 1.6 – 3.1 3.0 – 6.3 5.0 – 11.5 7.0 – 12.5
500 mm 1.3 – 2.5 2.7 – 5.2 4.7 – 8.4 5.5 – 10.5
600 mm – 2.4 – 4.5 4.3 – 7.8 4.7 – 8.4
700 mm – 2.2 – 4.0 4.0 – 7.5 4.3 – 8.0
800 mm – – 3.6 – 6.2 3.9 – 7.3
900 mm – – 3.4 – 5.8 3.5 – 6.7
90° 300 mm 2.0 – 3.5 3.3 – 6.7 6.0 – 10.3 7.8 – 13.6
400 mm 1.5 – 2.6 2.5 – 5.0 5.5 – 7.8 3.8 – 10.2
500 mm 1.2 – 2.1 2.0 – 4.0 3.6 – 6.3 4.7 – 8.2
600 mm 1.0 – 1.8 1.7 – 3.3 3.0 – 5.2 3.9 – 6.8
700 mm 0.9 – 1.4 1.4 – 2.7 2.5 – 4.3 3.2 – 5.7
800 mm 0.7 – 1.3 1.2 – 2.6 2.2 – 3.9 2.9 – 5.1
900 mm 0.7 – 1.2 1.1 – 2.2 2.0 – 3.4 2.6 – 4.5
1000 mm 0.6 – 1.0 1.0 – 2.0 1.8 – 3.1 2.4 – 4.1
110° 300 mm 1.2 – 2.9 2.6 – 5.5 4.6 – 9.5 –
400 mm 0.9 – 2.2 2.0 – 4.4 3.8 – 7.0 4.6 – 8.7
500 mm 0.7 – 1.8 1.7 – 3.4 3.1 – 5.8 3.7 – 6.5
600 mm – 1.4 – 3.0 2.6 – 4.7 3.1 – 5.8
700 mm – – 2.3 – 4.1 2.8 – 4.5
800 mm – – 2.0 – 3.8 2.4 – 4.1
900 mm – – – 2.1 – 3.9
1000 mm – – – 1.8 – 3.7
133
32
149
75°
19
19.5
262
32
32
32
63
~183
81
Flap FittingsLid stay
Maxi Touch opening 3675For one-piece flaps without handle,made of wood or with aluminum frameFor door opening system with mechanical opening aid
With opening angle 75°
With opening angle 110°
Choice of Maxi Touch opening, edge distance 63 mm
With opening angle 90°
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.99
3
Order referenceMagnetic door catch not supplied, please order separately.
• For Flaps without handle (Touch opening) followingcomponents are required:Maxi 3675 individual component + mounting brackets
Magnetic door catch
With counterplate for glue fixing
With counterplate for knocking in
• Version: With magnet for holding in closed position• Material: Plastic• Colour: Beige• Mounting: For mounting in drilled hole in cabinet top or
base
Installation Cat. No.Counterplate for knocking in 356.06.401Counterplate for glue fixing 356.06.402
With counterplate for knocking in
• Material: Steel• Installation: For knocking in
Finish Cat. No.Galvanized 246.08.910
With positioning aid
With positioning aid Without positioning aid
• Material: Plastic• Colour: Beige• Mounting: For screw fixing to cabinet top or base
Cat. No.With positioning aid 356.06.410Without positioning aid 356.06.420
Flap FittingsLid stay
Cruciform adapter housing for screw fixing
Counterplate for knocking in
Accessories for Maxi Touch opening 3675
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Push magnetic door catch, for mounting drilled hole
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.100
3
Choice of Maxi, edge distance 63 mm
Model A B C D
Flap height Flap weight kg
75° 400 mm 2.2 – 4.0 4.3 – 8.2 7.1 – 14.0 –
500 mm 1.8 – 3.2 3.4 – 7.0 6.4 – 11.5 6.8 – 13.4
600 mm 1.6 – 3.0 2.9 – 5.5 5.1 – 10.0 6.4 – 11.2
700 mm 1.4 – 2.8 2.6 – 5.1 4.9 – 9.1 5.3 – 10.2
800 mm – 2.4 – 4.6 4.0 – 7.4 4.9 – 9.0
900 mm – 2.2 – 4.4 3.8 – 7.0 4.7 – 8.2
1000 mm – 2.0 – 4.2 3.5 – 6.7 4.4 – 7.6
90° 300 mm 2.7 – 5.1 5.0 – 8.5 8.0 – 12.0 9.0 – 15.0
400 mm 2.1 – 3.5 4.5 – 6.7 5.8 – 11.2 7.2 – 13.5
500 mm 1.6 – 2.6 3.5 – 5.5 4.5 – 8.8 6.0 – 11.0
600 mm 1.3 – 2.2 2.7 – 4.3 3.9 – 7.7 4.8 – 8.5
700 mm 1.2 – 2.0 2.5 – 3.7 3.2 – 6.4 4.2 – 7.6
800 mm – 2.4 – 3.4 3.0 – 5.4 3.5 – 6.7
900 mm – – 2.7 – 5.2 3.0 – 6.0
1000 mm – – – 2.7 – 5.5
110° 300 mm 1.4 – 3.2 3.1 – 5.9 5.4 – 10.0 –
400 mm 1.2 – 2.5 3.0 – 5.0 4.2 – 8.1 4.8 – 9.0
500 mm 0.9 – 2.0 2.2 – 3.8 3.2 – 6.3 2.8 – 7.5
600 mm 0.7 – 1.5 1.9 – 3.5 2.7 – 6.0 3.5 – 6.8
700 mm – 1.7 – 2.7 2.5 – 4.5 3.0 – 5.2
800 mm – – 2.2 – 3.6 2.6 – 4.7
900 mm – – – 2.3 – 4.3
1000 mm – – – 2.0 – 4.0
With opening angle 75
With opening angle 90
With opening angle 110
Flap FittingsLid stay
Maxi 3675, Edge distance 63 mm (screw-on bracket turned)For one-piece flaps with handle,made of wood or with aluminum frame
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.101
3
Supplied with1 Lid stayInstallation instructions
Packing: 1 piece
Packing: 1 piece
Mounting bracket
Packing: 1 piece
Soft-closing mechanism
Packing: 1 or 10 pieces
Packing: 1 piece
• Opening angle: 75°, 90° or 110°• Material: Zinc alloy• Finish: Nickel plated• Version: With power assisted opening• Mounting: Suitable for left hand and right hand use
Model Colour Cat. No.A Grey 373.69.902B Beige 373.69.900C White 373.69.901D Black 373.69.903
• Area of application: For mounting the lid stay to the cabinet• Material: Steel• Finish: Nickel plated
Cat. No.For edge distance (cabinet) 37 or 63 mm 373.69.906For edge distance (cabinet) 28 mm 373.69.907
For wooden flaps or flaps with aluminium frame, from frame width 45 mm
For flaps with aluminium frame, frame width 20 mm
• Area of application: For mounting the lid stay to the flap• Material: Steel• Finish: Nickel plated
Installation Cat. No.For wooden flaps or flaps with aluminium frame, from frame width 45 mmFor Varianta special screw 373.69.904For chipboard screws 373.69.911With slide-on clip (for quick fixing), for Varianta special screw
373.69.908
With slide-on clip (for quick fixing), for chipboard screws
373.69.912
For flaps with aluminium frame, frame width 20 mmWith slide-on clip (for quick fixing) 373.69.909Without slide-on clip 373.69.905
• Area of application: For edge distance 28 and 37 mm• Material: Zinc alloy
Finish Cat. No.Nickel plated 373.69.799
• Material: Steel
Key sizemm
Finish Cat. No.
10 Black 008.28.100
Flap FittingsLid stay
Mounting bracket
Mounting bracket
Allen key, L shape
Individual component for Maxi and Maxi Touch opening 3675 and accessoriesMaxi 3675 Lid stay
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.102
3
Flap FittingsLid stay
Duo 3667/Duo forte 3666 Complete set,For flaps made for wood orwith aluminum frameWith adjustable spring force
Function
Note on DuoWhen used as flap stay, a magnet has to be fitted.
Note on Duo forteWhen used as flap stay, a magnet has to be fitted with an installation height of 189 + 32 mm and a projection of 160 + 32 mm.
Installation referenceNote minimum installation depth.Duo: 135 mmDuo forte: 175 mm
Installation
Duo 3667
Duo forte 3666
Use as lid stay, wooden flap
Use as lid stay, flap with aluminium frame
Use as flap stay, wooden flap
• Area of application: Also suitable for use as flap stay• Opening angle: 75°, 90° or 110°• Material: Stay: Zinc alloy,
mounting bracket: Steel• Finish: Nickel plated• Version: With self closing function• Mounting: For left and right hand use• Installation: Without tools (clip system)• Distance from edge: 28 mm or 37 mm (optional)• For aluminium frame width 20 mm or from 45 mm• Lock function: Flap locks in any position,
braking function: Flap locks in end position,release by slight pressure
Setting the braking effect to locking and braking by adjusting the screw with a SW4 hexagon socket
Lid stay Lid stay
Lid stay Flap stay
Lid stay Lid stay
Lid stay
Flap stay Flap stay
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.103
3
Flap FittingsLid stay
Duo 3667 Complete set Duo forte 3666 Complete set
Sample measurements table for max. flap weight
Supplied with1 Lid stay1 Mounting bracket1 Screw-on bracket Installation instructions
Packing: 1 piece
Adjustment facility
Sample measurements table for max. flap weight
Supplied with1 Lid stay1 Mounting bracket1 Screw-on bracket Installation instructions
Packing: 1 piece
Flap height mm
max. flap weight kgLock function Braking function1 Stay 2 Stays 1 Stay 2 Stays
For opening angle 75°200 9.0 15.0 11.5 15.0250 7.0 15.0 9.0 15.0300 6.0 12.0 7.5 15.0350 5.0 10.0 6.5 13.0400 4.5 9.0 6.0 11.5450 4.0 8.0 5.0 10.0500 3.5 7.0 4.5 9.0For opening angle 90 °200 7.5 15.0 9.5 15.0250 6.0 12.0 7.5 15.0300 5.0 10.0 6.0 13.0350 4.0 8.5 5.5 11.0400 3.5 7.0 5.0 10.0450 3.5 6.5 4.0 8.5500 3.0 6.0 4.0 8.0For opening angle 110 ° 200 6.0 12.0 8.0 15.0250 5.0 9.5 6.0 12.0300 4.0 8.0 5.0 10.0350 3.0 7.0 4.0 9.0400 3.0 6.0 4.0 7.5450 2.5 5.0 3.5 7.0500 2.0 5.0 3.0 6.0
Area of application Edge distance mm
Cat. No.
For wooden flaps or flaps with aluminium frame, from frame width 45 mm
28 373.66.61137 373.66.612
For flaps with aluminium frame, frame width 20 mm
28 373.66.62137 373.66.622
Height adjustment ±2 mm
Side adjustment +3/-1 mm
Tilt adjustment ±1.5 mm
Pull adjustment
+- kg
Flap height mm
max. flap weight kgLock function Braking function1 Stay 2 Stays 1 Stay 2 Stays
For opening angle 75 °200 14.0 15.0 15.0 15.0250 11.5 15.0 15.0 15.0300 9.0 15.0 12.0 15.0350 8.0 15.0 11.0 15.0400 7.0 14.0 9.0 15.0450 6.0 12.5 8.0 15.0500 5.5 11.0 7.0 15.0550 5.0 10.0 6.5 13.0600 5.0 9.5 6.0 12.0650 4.0 8.5 5.5 11.0700 4.0 8.0 5.0 10.5For opening angle 90 °200 12.5 15.0 15.0 15.0250 9.5 15.0 12.0 15.0300 8.0 15.0 10.0 15.0350 7.0 13.5 9.0 15.0400 6.0 12.0 8.0 15.0450 5.0 11.0 7.0 14.0500 5.0 9.5 6.0 12.0550 4.0 8.5 5.5 11.0600 4.0 8.0 5.0 10.0650 3.5 7.0 5.0 9.5700 3.0 7.0 4.0 9.0For opening angle 110 ° 200 9.5 15.0 12.5 15.0250 7.5 15.0 10.0 15.0300 6.5 12.5 8.0 15.0350 5.5 11.0 7.0 14.0400 4.5 9.5 6.0 12.5450 4.0 8.5 5.5 11.0500 4.0 7.5 5.0 10.0550 3.5 7.0 4.0 9.0600 3.0 6.0 4.0 8.0650 3.0 5.5 4.0 7.5700 3.0 5.0 3.5 7.0
Area of application Edge distance mm
Cat. No.
For wooden flaps or flaps with aluminium frame, from frame width 45 mm
28 373.66.63137 373.66.632
For flaps with aluminium frame, frame width 20 mm
28 373.66.64137 373.66.642
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.104
3
Supplied with1 Lid stayInstallation instructions
Packing: 1 piece
Order referenceMounting brackets and screw-on brackets not supplied. Please order separately.
Packing: 1 or 20 pieces
Packing: 1 or 20 pieces
• Opening angle: 75°, 90° or 110°• Material: Zinc alloy• Finish: Nickel plated• Version: With self closing function• Mounting: For left and right hand use• Installation: Without tools (clip system) onto pre-mounted
mounting bracket• Lock function: Flap locks in any position,
braking function: Flap locks in end position,release by slight pressure
Model series Cat. No.Duo 373.66.660Duo forte 373.66.661
• Area of application: For mounting the lid stay to the cabinet• Material: Steel• Finish: Nickel plated
Cat. No.For edge distance (cabinet) 28 mm 373.66.693For edge distance (cabinet) 37 mm 373.66.694
For wooden flaps or flaps with aluminium frame, from frame width 45 mm
For flaps with aluminium frame, frame width 20 mm
• Area of application: For mounting the lid stay to the flap• Material: Steel• Finish: Nickel plated
Cat. No.For wooden flaps or flaps with aluminium frame, from frame width 45 mm
373.66.681
For flaps with aluminium frame,frame width 20 mm
373.66.682
Mounting bracket
Duo 3667 and Duo forte 3666 lid stays, individual components
Accessories forDuo 3667 and Duo forte 3666
Flap FittingsLid stay
Mounting bracket
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.105
3
Adjustment facility
Installation
Sample measurements table for max. flap weight
Packing: 1 piece
Order referenceMounting brackets and screw-on brackets not supplied. Please order separately.
Packing: 20 pieces
Packing: 100 pieces
• Area of application: For wooden lids on chests• Opening angle: approx. 75°• Material: Stay: Zinc alloy,
mounting bracket and screw-on bracket: Steel, cover cap for adjusting screw: Plastic
• Finish: Nickel plated, cover cap: Grey• Colour: Model F: blue,
model G: brown, model H: black
• Installation: Without tools (clip system) onto pre-mounted mounting bracket
Height adjustment ±2 mm
Side adjustment +3/-1 mm
Tilt adjustment ±1.5 mm
Holding power adjustment
kg
Model F G H
Flap height mm Flap weight kg
1 Flap fitting
400 1.6 – 3.1 3.0 – 5.3 5.2 – 9.4
500 1.3 – 2.6 2.5 – 4.2 4.3 – 7.5
600 1.1 – 2.5 2.3 – 4.2 4.0 – 6.7
2 Flap fittings
400 3.2 – 6.2 6.6 – 10.6 10.4 – 18.8
500 2.6 – 5.2 5.0 – 8.4 8.6 – 15.0
600 2.2 – 5.0 4.6 – 8.4 8.0 – 13.4
Model Colour Cat. No.F Blue 373.85.700G Brown 373.85.701H Black 373.85.702
• Area of application: For mounting the lid stay to the cabinet• Material: Steel• Finish: Nickel plated
Cat. No.For edge distance (cabinet) 37 or 63 mm 373.69.906For edge distance (cabinet) 28 mm 373.69.907
For wooden flaps orflaps with aluminium frame,from frame width 45 mm
For flaps with aluminium frame, frame width 20 mm
• Area of application: For mounting the lid stay to the lid• Material: Steel• Finish: Nickel plated
Installation Cat. No.For wooden flaps or flaps with aluminium frame, from frame width 45 mmFor Varianta special screw 373.69.904For chipboard screws 373.69.911With slide-on clip (for quick fixing), for Varianta special screw
373.69.908
With slide-on clip (for quick fixing), for chipboard screws
373.69.912
For flaps with aluminium frame, frame width 20 mmWith slide-on clip (for quick fixing) 373.69.909Without slide-on clip 373.69.905
Mounting bracket
Mounting bracket
Accessories for Maxi up 3675
Flap FittingsLid stay
Maxi up 3675 individual component,chest fitting for wooden lids
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.106
3
Flap FittingsWithout braking effect
Lid stay Lid stay
With joint, for wooden flaps With joint, for flaps and lids made of wood
Color Cat. No.
Housing: Black 365.31.300
Housing: White 365.31.700
Mounting Cat. No.
Left 366.30.770
Right 366.30.761
• Opening angle: 80° – 100°, adjustable with adjusting screw• Material: Steel, plastic housing• Finish: Nickel plated, black and white housing• Mounting: For left and right hand use• Installation: For screw fixing, at angular bracket for plug fitting (quick fixing system)
• Opening angle: 80° – 100°, adjustable with adjusting screw• Material: Steel, plastic housing• Finish: Nickel plated, black and white housing• Mounting: For left and right hand use• Installation: For screw fixing, at angular bracket for plug fitting (quick fixing system)
NoteLid stay with right hand side mounting is converted to left hand sidemounting when used as a flap stay, and vice versa.
Drilling pattern
Supplied with:
Fixing screw and installation instructions
Installation
Side panel
Installation
FunctionFor use as lid stay or flap stay.
Packing: 1 piece Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.107
3
Flap FittingsFor designer doors
GS 45 Mitred flap hinge Lid stay Opening angle approximately 70-100°
Height adjustment 3 mm,width and depth adjustment1.5 mm
Adjustment facility
Mounting
Flap closed Flap open
Drilling pattern 45° mitre cut
Width
Height
The only hinge that can be used for furniture structures withmitred cabinet corners and flap.
• Opening angle: 90°• Mitre cut: 45°• Material: Zinc alloy cup, steel arm• Finish: Nickel plated• For door thickness: 16 – 22 mm• Side panel thickness: 16 – 22 mm, from 20 mm and above the edge has to be chamfered by 3 mm• Adjustment facility: 3-dimensional• Installation: For screw fixing
• Version: For wood or aluminum framed flaps• Opening angle: 70°/90°/100°• Material: Steel, plastic housing• Mounting: For left and right hand use• Installation: For screw fixing
Opening angle Cat. No.
90° 325.02.702
Note:
To be used in combination with flap stays only
Packing: 1 piece
20
242
77
bracket for wooden door bracket for aluminum door Round racket
Spring force Color Cat. No.
80 N Grey 373.82.002
100 N 373.82.003
120 N 373.82.004
150 N 373.82.005
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.108
3
Flap FittingsWith adjustable braking effect
Adjusting the braking effect withthe screw Unscrew to increase braking effect Tighten screw to decrease braking effect
Braking effect
Opening angle: 90°Material: SteelFinish: Nickel platedMounting: For left or right hand useInstallation: Angular bracket for screw fixing at angular bracket for plug fitting (quick fixing system)
Lid stay
Installation
S = flap overlay dimension on cabinet
InstallationAluminium frame
S = flap overlay dimension on cabinet
With joint, for wooden flaps For wooden flaps
Openingangle
Supplied with:Fixing screws and installation instructions
S = flap overlay dimension on cabinet
Piano hinges or hinges with exposed axle
Concealed hinges
Dim. Amm
Dim. Bmm
Dim. Cmm
Dim. Dmm
Dim. Emm
80° 106 105-S 121-S90° 98 97-S 113-S100° 92,5 91.5-S 107.5-S
80° 100 99 115
90° 91,5 90,5 106,5100° 85 84 100
Mounting Cat. No.
Left 365.31.611
Right 365.31.610
Mounting Cat. No.
Left hand 365.31.621
Right hand 365.31.620
Packing: 1 piece Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.109
3
Flap FittingsWith adjustable braking effect
• Opening angle: Steel housing: Plastic• Finish: Nickel plated housing: White• Mounting: For left or right hand use• Installation: For screw fixing
Mounting Length Lmm
Cat. No.
Left 160 365.86.713
190 365.86.731
220 365.86.759
Right 160 365.86.704
190 365.86.722
220 365.86.740
Vertical mountingInstallation
Dimension CDetermine dimension C bytrial mounting
Dimension CDetermine dimension C bytrial mounting
Horizontal mounting
Adjusting the braking effect withthe screw Unscrew to increase braking effect Tighten screw to decrease braking effect
Braking effect
Dorana-Stop Flap stay with brakingmechanism
1 arm, with housing and screw-on bracket
Length L mm Internal cabinet height mm Dimension A mm
160 250 - 350 127
190 300 - 400 151
220 350 - 450 175
Length L mm Internal cabinet height mm Dimension A mm
160 250 - 350 82
190 300 - 400 105
220 350 - 450 127
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.110
3
Flap FittingsWith adjustable braking effect
Fall-Ex Flap stay with braking mechanism 1 arm, with piston rod for wooden flaps Vertical mounting
Installation
Dimension CDetermine dimension C by trial mounting
Dimension CDetermine dimension C bytrial mounting
Horizontal mounting
Braking effectAdjusting braking effect by turning the piston rod.• Turn clockwise to decrease• Turn anticlockwise to increase
• Opening angle: Steel, brass square tube• Finish: Nickel plated• Version: With angular bracket• Mounting: For left and right hand use• Installation: For screw fixing into 32 mm series drilled holes
Length L mm Internal cabinet height mm Dimension A mm
250 300 - 400 22.5
330 350 - 450 54.5
465 400 - 500 118.5
Length L mm Internal cabinet height mm Dimension A mm
250 300 - 400 241.5
330 350 - 450 288.0
465 400 - 500 406.5
Length L mm Cat. No.
250 372.17.753
330 372.17.762
465 372.17.771
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.111
3
Flap FittingsWith adjustable braking effect
Flap stay with braking mechanism 1 arm, With joint for wooden flaps
• Opening angle: 90°• Material: Steel• Finish: Nickel plated• Version: With angular bracket• Mounting: For left and right hand use• Installation: For screw fixing, at angular bracket for plug fitting (quick fix system)
Mounting Cat. No.
Left 365.30.611
Right 365.30.610
Installation
Adjusting the braking effect withthe screw Unscrew to increase braking effect Tighten screw to decrease braking effect
Braking effect
Concealed hinges 97 106 122
Dim. A Dim. B Dim. C
Piano hinges or hinges with exposed 90 99 115axle
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.112
3
Flap FittingsWith Minifix connection
For wooden flapsFor press fitting°
Flap made of wood, application example with Fall-Ex flap stay with braking mechanism
Flap with aluminium frame, application example with Fall-EX flap stay with braking mechanism
Detail view: Flap made of wood
Drilling pattern wooden flap
Application and planning dimensions
Flap open
Flap closedFlap hinge for wooden and aluminium frames.Construction in combination with Minifix connector housing.
• Material: Zinc alloy• Finish: Nickel plated
Application• The flap hinges are mounted with the Minifix 15 connector housing• Quick and easy mounting through drilling from the front• High stability as the connecting bolt and the hinge were made in one casting• LGA tested in accordance with DIN 68841
Installation• Push flap hinge into drilled hole of flap• Fixing through inner side of cup with countersunk chipboard screw• Ø 3.5 x 20 mm
Installation Cat. No.
For press fitting 342.77.700
Order referencePlease order Minifix 15 connector housing and chipboard screws separately.
Flap hingeWith adjustable spring force
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.113
3
Flap FittingsWith Minifix connection
For aluminum framesFor plug fitting
Minifix 15 Connector housing
• Material: Zinc alloy• Finish: For wood thicknesses from 19 mm and above
Installation• Insert flap hinge in aluminum frame• Fixing from beneath with countersunk chipboard screw Ø 3.5 x 13 mm
Installation Cat. No.
For plug fitting 342.77.710
Order reference
Minifix 15 connector housing and chipboard screws separate.
Finish Cat. No.
Bright 262.26.075
Nickel plated 262.26.575
Detail view: Closed flap made of wood, viewed from beneath
Detail view: Closed flap with aluminium frame, viewed from beneath
Drilling pattern cabinet
Detail view: Flap with aluminium frame
Drilling pattern for aluminium frames
Application and planning dimensions
Flap open
Flap closed
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.114
3
Flap FittingsFlap hinges
Piano-Medial Flap hinge Flap hinge Opening angle 270°
Finish/color Cat. No.
Chrome plated, white 342.75.226
Gold colored, brown 342.75.520
Finish/color Cat. No.
Nickel plated 342.75.628
Gold colored 342.75.824
Burnished 342.75.128
Material Finish Cat. No.
Steel Black matt 342.62.310
Nickel plated polished 342.62.710
Brass Nickel plated matt 342.63.600
Matt 342.63.502
Burnished 342.63.100
• Material: Plastic/zinc alloy or zinc alloy• Finish: For screw fixing
• Installation: For screw fixing
Drilling pattern
Application and planning dimensions
Drilling dimensions in base and in flap
Flap open Flap closed
Drilling pattern
Application and planning dimensions for base thickness
Drilling dimensions in base Drilling dimensions in flap
12 mm 16 mm 19 mm
Plastic/zinc alloy
Plastic/zinc alloy
Opening angle 90°
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.115
3
Flap FittingsFlap hinges
Flap hinge 3-dimensionally adjustable, Opening angle 90°
Finish Cat. No.
Nickel plated 342.66.730
Finish/color Cat. No.
Nickel plated, black 342.76.303
Nickel plated 342.76.705
Door overlay mm 6,0 7,0 8,0
Gap A mm 2,5 2,0 1,6
Gap B mm 0,5 1,0 1,6
• Material: Plastic/zinc alloy or zinc alloy• Finish: For screw fixing
Zinc alloy
Plastic/zinc alloy
Drilling pattern for base and flap
Application and planning dimensions
Adjustment facility
Flap open Flap closed
Gap calculation with 1 mm curve
Drilling pattern for flap Drilling pattern for base panel
Application and planning dimensions
Adjustment facility
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.116
3
Hinges and Flap FittingsSoft closing system – Smuso gentle closing
Door Buffer Door buffer for mounting in drilled holes
• Material: Plastic
• Area of application: For gently closing doors • Installation: For inserting the door buffer into an adapter plate, with overlay doors following is also possible: Inserting the door buffer into a drill hole in the front edge of the cabinet
Note:
Buffer is recommended for doors with width from 450 mm up to 600 mm. For doors above a height of 1,600 mm or doors with aluminum or wooden frames it may be required to use 2 Smoves which have to be inserted at top or bottom of the furniture side panel.
Position buffer in the centre of the side panel front edge
Door buffer for mounting in drilledhole
Adapter housing for screw fixing Insert buffer into adapterhousing
Insert buffer into drill hole infront edge
Installation in side panels opposite the hinge side
Installation in top or base panel
Color Cat. No.
Orange, grey 356.33.509
Color Cat. No.
Light grey, grey 356.33.510
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.117
3
Hinges and Flap FittingsSoft closing system – Smuso gentle closing
• Material: Plastic• Color: Grey
Installation in side panels opposite the hinge side
With positioning aidCruciform adapter housingFor screw fixing with chipboard screw
Without positioning aidCruciform adapter housingFor screw fixing with chipboard screw
Cruciform adapter housingFor screw fixing with chipboard screw
Cruciform adapter housingFor screw fixing with chipboard screw
Color Cat. No.
Grey, grey 356.11.520
Cat. No.
Edge distance 37 mm 356.11.560
Cat. No.
Edge distance 28 mm 356.33.501
Cat. No.
Edge distance 37 mm 356.11.562
Cat. No.
Edge distance 37 mm 356.11.563
Mounting with positioning aidfor screw fixing
Without positioning aidfor screw fixing
37
61
32
37
60
32
37
60
32
28
61
32
Adapter housing for screw fixing
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.118
3
Hinges and Flap FittingsSoft closing system – Smuso gentle closing
Installation
Insert door buffer into an adapter housing
Insert door buffer into a drill hole in the front edge of cabinet
Soft closing mechanism for doors
• Area of application: For gently closing doors• Installation: For inserting into adapter housing or plug fitting into Ø10 mm drill hole
• Material: Plastic
• Material: Plastic
• Characteristics: Air cushioned• Material: Plastic
Soft closing mechanism for doorsFor inserting into adapter housing or drill hole
Adapter housing Without positioning aid
Adapter housingWith positioning aid
Color Cat. No.
Grey 356.37.650
Color Cat. No.
Grey 356.37.571
Nickel plated matt 356.37.671
Color Cat. No.
Grey 356.37.591
Packing: 1 piece
Packing: 1 piece
Packing: 1 piece
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - Cebu
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
FF 3.119
3
Installation in side panels on the hinge side
Door damping device
Corner
Twin
Door Damper Turbo
16
24
45
X
Door Damper Uni
• Material: Housing: Plastic Damper: Plastic• Surface / color: Housing: Grey Damper: black / grey• Adjustment: adjustable damping pressure at front and back side
For carcase with overlapping door or flaps(try out recommended) can be used for concealed hinges withclosing mechanism
• Material: Housing: Zinc die-cast Damper: Plastic• Surface / color: Housing: nickel-plated Damper: black / grey / silvergrey• Adjustment: adjustable damping pressure at front and back side
Damping Force Color Cat. No.
10N black / grey 356.15.510
Damping Force Color Cat. No.
2x20N black / grey 356.15.640
Damping Force Color Cat. No.
20N black / grey 356.15.520
40N black / grey 356.15.521
Damping Force Color Cat. No.
20N black / grey 356.15.629
40N black / grey / silver grey 356.15.630
Packing: 1 to 20 pieces
Packing: 1 to 20 pieces
Packing: 1 to 10 pieces
Packing: 1 to 20 pieces
Hinges and Flap FittingsSoft closing system – Smuso gentle closing
Dim
ensi
onal
dat
a no
t bin
ding
. We
rese
rve
the
right
to a
lter
spec
ifica
tions
with
out n
otic
e.
Dimensions in mmInches are approximate
Prices • Availability • Ordering • www.hafele.comCall +632 571 3683 - Manila • +6332 345 3672 - CebuFF 3.120
3