Post on 27-Jun-2020
transcript
260
3M™ Microfinishing Film 366LFor Solid Surface Materials
• Micron graded for consistent finisheswith no wild scratches
• Use for leveling and finishing acrylicand polyester solid surfaces
• Provides superior finishing for long life
Item # Grade Min. Order5" Dia. x No Dust Holes - Hookit™ Attachment SystemMM484162* 15 Micron 50/pk
MM484164* 30 Micron 50/pk
MM484167 60 Micron 50/pk
MM484168* 80 Micron 50/pk
MM84169 100 Micron 50/pk
MM84177* 30 Micron 125/pk
MM484180 60 Micron 125/pk
MM484181* 80 Micron 125/pk
MM484182 100 Micron 125/pk
MM484184* 150 Micron 125/pk
6” Dia. x No Dust Holes - Hookit™ Attachment SystemMM499355 80 Micron 50/pk
MM499025* 100 Micron 50/pk
6” Dia. x No Dust Holes - PSA DiscMM54413 60 Micron 50/pk
MM54412* 100 Micron 50/pk
6” x 8 Hole - Hookit™ MM79226IN* 15 Micron 50/pk
MM956929* 30 Micron 50/pk
MM956927 60 Micron 50/pk
MM956928* 80 Micron 50/pk
11-1/4” x No Dust Holes - Hookit™MM000121925 30 Micron 25/pk
MM000122311 60 Micron 25/pk
MM000122329 80 Micron 25/pk
MM000122337 100 Micron 25/pk
MM000134563* 180 Micron 25/pk
3M™ Trizact™ Film Disc 268XA, 568XAFor Solid Surface Materials
• Use after leveling step• Consistent cut rate and longer life than
other conventional abrasives• Mist the surface with water during use• Often eliminates the need for messy
compounds
Item # Grade Color Min. Order5” Dia. x No Dust Holes - Hookit™MM440227928 268XAA10 Blue 50/pk
MM440227910 268XAA35 Green 50/pk
MM440227936 268XAA5 Orange 50/pk
MM440228009 568XA White 50/pk
5” Dia. x No Dust Holes - PSA Disc RollMM49744* 268XAA35 Green 25/pk
MM49749 268XAA10 Blue 25/pk
MM49748* 268XA5 Orange 25/pk
MM49674* 568XA White 25/pk
6” Dia. x No Dust Holes - PSA Disc RollMM54616* 268XAA35 Green 25/pk
11-1/4” x No Dust Holes - Hookit™MM440227985 268XAA10 Blue 25/pk
MM440227977 268XAA35 Green 25/pk
MM440227993 268XAA5 Orange 25/pk
MM000148712 568XA White 25/pk
3M™ Garnet Abrasive Sheet110N, 130N, 140N
• Use for coarse grade heavy sanding• Garnet - D wt. paper, open coat for
less sanding
Item # Grade Case Qty.MM410005* 120 1000
261
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Clean Sanding Hookit™ Disc System216U, 236U, 360L for Dry Sanding
• Featuring 3M-patented, precisemulti-hole patterns that can evacuatedust better than 5- or 6-hole products
• Resist loading to extend disc life andimprove productivity
• Facilitate exceptional dust extractionwhen used with a 3M Clean SandingSander
• Deliver uniform, consistent finishes• Use 3M™ Hookit™ Attachment System
for easy reuse• 3M™ Clean Sanding Disc Pad is designed
so hole alignment is not required, allowing quick andeasy changeovers
• 216U: Aluminum oxide mineral, open coat on a durableA wt. paper backing; load resistant coating; used forsanding on e-coat, primer, paint, sealers and topcoats
• 236U: Aluminum oxide mineral coated on a durable C wt.paper backing; load resistant coating; excellent for sandingon whitewood, primer, paint, sealers and topcoats
• 360L: Aluminum oxide mineral coated on film backing;open coat; ideal for wood, plastics, gel and solid surface
Item # Grade Backing Weight Case Qty.5” Dia. - 236UMM016934 P80 Paper C 250
MM016958 P120 Paper C 250
6” Dia. - 236UMM207537* P180 Paper C 250
MM207544* P220 Paper C 250
3M™ Clean Sanding Hookit™ Disc System236U for Dry Sanding
• Featuring 3M-patented, precisemulti-hole patterns that can evacuatedust better than 5- or 6-hole products
• Resist loading to extend disc life andimprove productivity
• Facilitate exceptional dust extractionwhen used with a 3M Clean SandingSander
• Deliver uniform, consistent finishes• Use 3M™ Hookit™ Attachment
System for easy reuse• 3M™ Clean Sanding Disc Pad is designed
so hole alignment is not required, allowingquick and easy changeovers
• 236U: Aluminum oxide mineral coated on a durable C wt. paperbacking; load resistant coating; excellent for sanding on whitewood,primer, paint, sealers and topcoats
Item # Grade Backing Weight Case Qty.
236U - 3” W x 4” LMM209494* P180 Paper C 500
MM209517 P320 Paper C 500
3M™ Aluminum Oxide Abrasive Sheet216U, 210N, 336U, 346U
• 216U: A wt. paper provides anaggressive open coat material;designed for final hand or machinesanding of wood; also serves well forfinishing, sealer sanding or defect repair
Item # Grade Min. Order216U - 9” W x 11” LMM102547 P120 250
MM02545* P180 250
MM02544* P220 50
MM02541* P320 250
210N - 9” W x 11” LMM02108* 80 50
MM402107* 100
MM402106* 120
346U - 9” W x 11” LMM02117* 50 500
3M™ Clean Sanding Hookit™ Pads
Item # Size Thread Ext.Hookit™ Backup PadMM202785* 5” x [½]” N/A
5” Dia. - Disc PadMM203539* 5” x [⅜]” [5/16]-24
Hookit™ - Sheet PadMM204352* 3” x 4” N/A
262
3M™ Hookit™ Disc - Film255L Gold Engineered
• Aluminum oxide - strong, flexible, tear resistant film backing
• Gold Color film backing provides sharp cut, durability, outstanding finish
• Load resistant coating• Longer life
Item # Grade Min. Order Discs/Pk5” Dia. x No Dust HolesMM1009677* P80 1 75
MM00966* P100 1 100
3M™ Hookit™ Disc PadNo Dust Holes
Item # Size Thread Ext.
Speed Min. Order
MM105775 5" x [¾]" [5/16]-24 12000 RPM/ 12000 OPM
1
3M™ Hookit™ Disc - Paper735U Engineered
• Aluminum oxide - intermediate C wt. paper backing• Open coat• Load resistant coating• 50 Discs
Item # Grade Min. Order5” Dia. x No Dust HolesMM207261* P80 50
MM207308* P120 50
MM207360* P220 50
3M™ Hookit™ Disc Hand Pad
• Excellent for hand sanding with A wt. or C wt. Hookit™ discs
Item # Size Min. OrderMM85095* 5" Molded 10
MM477752* 5" x [¼]" 120
3M™ Hookit Disc268L
• Microfinishing Film• Ideal for sanding plastics, paint, e-coat and wood
Item # Grade Min. Order6” Dia. x No Dust HolesMM590801* 60 Micron 25/pk
3M™ Hookit™ II Disc236U Engineered
• Aluminum oxide mineral coated on a tear-resistant C wt. paper backing
• Gold Color• Designed to resist loading and
provide an excellent finish• 50 Discs
Item # Grade Min. Order5” Dia. x No Dust HolesMM486395* P150 50
263
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Hookit™ Dust-Free Low Profile Finishing Disc Pad
Dust Free
• For use with 5" Hookit™ dust-free discs
• Soft foam construction• Recommended for grades 220 and
finer
Item # Size Thread Ext.
Speed Min. Order
MM77856* 5" x [11/16]" [5/16]-24 12000 RPM/ 12000 OPM
10
3M™ Hookit™ Dust-Free Disc PadDust Free
• For use with Hookit™ dust-free discs
• Speed: 12000 RPM/12000 OPM• Thread Ext.: [5/16]-24
Item # Size Min. OrderMM82659* 5" x [¾]" 10
3M™ Hookit™ Low Profile Finishing Disc PadNo Dust Holes
Item # Size Thread Ext.
Speed Min. Order
MM477855* 5" x [11/16]" [5/16]-24 12000 RPM/ 12000 OPM
10
3M™ NX Hook and Loop Paper DiscWhite Line
• Non-staining, load resistant coating• Durable,aluminum oxide, open coat
construction• Excellent for sanding on white wood,
metal, composites, primer, paint sealers and topcoats
• Excellent for high production and general purpose sanding applications
• D - weight paper backing (grade 80 grit)• C - weight paper backing (grades 100-
220 grit)• Delivers benchmark performance at a
competitive price point
Item # Grit Pack Qty.5” Dia. x No Dust HolesMM65548* 80 50
MM65555* 100 50
MM65563* 120 50
MM65571* 150 50
3M™ NX PSA Paper Disc w/Tab LinerWhite Line
• Non-staining, load resistant coating• Durable,aluminum oxide, open coat
construction• Excellent for sanding on white wood,
metal, composites, primer, paint sealers and topcoats
• Excellent for high production and general purpose sanding applications
• D - weight paper backing (grade 80 grit)
• C - weight paper backing (grades 100-220 grit)
• Delivers benchmark performance at a competitive price point
Item # Grit Pack Qty.5” Dia. x No Dust HolesMM65712* 100 50
MM65720* 120 50
MM65738* 150 50
MM65753* 220 50
264
3M™ Portable Tool Belt - Cloth340D, 341D General Use
• Aluminum oxide on a durable X wt. cotton cloth backing
• 340D is an open coat belt that provides good cut with less loading
• 341D is a closed coat belt that provides great finish
• Excellent all-around abrasive belt for everyday use
Item # Grade Min. Order3" W x 18" L - 340DMM71512* P50 25
MM71512* P150 25
3” W x 21” L - 340DMM27498* P60 50
3” W x 21” L - 341DMM01422* P36 40
MM001425* P60 5
MM001426* P80 10
MM001427* P100 10
3” W x 24” L - 340DMM27474* P50 25
MM27473* P60 50
MM27470* P120 10
3” W x 24” L - 341DMM01430* P40 40
4” W x 24” L - 340DMM27463* P60 50
MM27462 P80 10
MM427461* P100 10
MM27460* P120 50
4” W x 24” L - 341DMM001437 P40 5
MM001438* P50 5
MM001439* P60 5
MM001440 P80 10
3M™ Sanding SpongeGeneral Use
• Conformable, flexible and convenient Abrasive on four sides
• Ideal for dry or wet sanding of wood, paint, metal, plastic, and drywall
Item # Grade Min. Order3-3/4” x 2-5/8” x 1”MM500408* Medium 1
MM06968* Fine 250
MM06967* Medium 250
3M™ Portable Tool Belt - Cloth761D Purple High Performance
• Cubitron™ Abrasive Grain and premium aluminum oxide blended minerals on a heavy Y wt. cloth backing
• Film splice allows for the belt to be run bi-directional
• Purple color indicates leading edge technology…designed to provide you with the lowest possible manufacturing costs
Item # Grade Min. Order3” W x 21” LMM481400 P60 5
MM481401 P80 5
MM481402* P100 5
MM481403 P120 5
3” W x 24” LMM481410 P50 5
MM481411 P60 5
MM481412 P80 5
MM481413 P100 5
MM481414 P120 5
MM481415* P150 5
4” W x 24” LMM481429 P50 5
MM481430 P60 5
MM481431 P80 5
MM481432 P100 5
MM481433 P120 5
MM481434 P150 5
265
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ SandBlaster™ Sanding SpongeEngineered
• SandBlaster™ abrasives sand faster and last longer than 3M™ conventional abrasives of comparable grit
• Clog resistant• Color-coded by function with grit
numbers printed on the sponge• Ideal for both flat and contoured
surfaces such as raised panel doors and cabinets• Easy to hold and comfortable to use
Item # Grade Color Type Min. OrderSleeved - 3.7” x 2.6” x 1”MM11516* 60 Green Coarse 12
3M™ Silicon Carbide Abrasive Sheet405N, 415U, 415N, 435N
• 405N: A wt. paper, open coat; ideal for dry sanding between coats of varnish and other wood finishes; provides exceptional finishes and excellent conformability for contour sanding; silicon carbide cuts fast and satin smooth
• 415U/415N: A wt. paper, open coat; surface treated with load resistant coating to extend abrasive life
• 435N: C wt. paper; open coat and load resistant coating
Item # Grade Min. Order405N - 3-2/3” W x 9” LMM410275* 220 4
405N - 4-1/2” W x 5-1/2” LMM10332* 180 1
405N - 4-1/2” W x 11” LMM10260* 220 20
405N - 9” W x 11” LMM410247 180 1
MM410246* 220 1
MM410244 280 1
MM10242* 360 1
MM10240* 500 1
435N - 9" W x 11" LMM402356* 100 10
MM402354* 150 10
3M™ Softback Sanding SpongeGeneral Use
• 5-1/2” x 4-1/2” x 3/16” sponges are conformable, flexible and convenient
• Abrasive on one side
Item # Grade Min. Order20 PackMM02600* MicroFine 1
MM02601 UltraFine 1
MM1026025* SuperFine 1
MM1026049 Fine 1
MM02623* Fine 1
MM02606* Medium 1
Bulk Box of 250 SpongesMM06964* SuperFine 250
MM06965 Fine 250
3M™ Stikit Disc248D General Use
• Aluminum oxide - X wt. cloth• Heavy duty cloth backed discs for
more aggressive applications• Provides excellent adhesion while
removing easily
Item # Grade Min. Order20” Dia.MM88874* P80 10
266
3M™ Stikit™ Disc - Cloth900DZ Purple High Performance
• Premium purple disc - durable, long lasting Cubitron™ Abrasive Grain, flagship of the Stikit™ line
• J wt. cloth - open coat• Flexible, tear resistant cloth• 3M™ Xodust™ Technology reduces
static and airborne dust levels when coupled with an efficient dust- collection system
• 50 Individual discs with liner
Item # Grade Min. Order5” Dia. x No Dust HolesMM49639* 80 50
MM49640* P100 50
MM149643* P150 50
MM49644* P220 50
3M™ Stikit Disc268L
• Microfinishing film• Ideal for sanding plastics, paint, e-coat and wood• 25 Discs per pack
Item # Grade Min. Order5” x No Dust HolesMM476977* 15 Micron 25/pk
MM476975 30 Micron 25/pk
MM76974* 40 Micron 25/pk
MM414975 60 Micron 25/pk
MM414972* 90 Micron 25/pk
MM480205 100 Micron 25/pk
5” Dia. x 5 HolesMM592643* 100 Micron 25/pk
MM414851* 30 Micron 25/pk
MM414854 60 Micron 25/pk
MM414855* 80 Micron 25/pk
MM480204 100 Micron 25/pk
3M™ Stikit™ Disc - Cloth300D General Use
• Aluminum oxide - J wt. cloth• Excellent for all types of wood
sanding• Flexible cloth backing provides
excellent durability• Open coat resists loading• 250 Individual discs with liners
Item # Grade Min. Order5” Dia. x No Dust HolesMM50450* 80 250
MM50451* P100 250
MM50452* P120 250
MM50453* P150 250
3M™ Stikit™ Disc - Film255L Engineered
• Aluminum oxide - strong, flexible, tear resistant film backing - Gold Film
• Provides sharp cut, durability, outstanding finish
• Longer, heat-resistant life• Load resistant coating• Convenient disc roll form, 125 discs
per roll
Item # Grade Discs/Roll Min. Order5” Dia. x No Dust HolesMM482471 P80 125 1
MM482470 P100 125 1
MM482469 P120 125 1
MM482468 P150 125 1
MM482467 P180 125 1
MM82466* P220 125 1
267
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Stikit™ Disc Roll - Paper415U, 415N General Use
• Silicon carbide - A wt. paper• General purpose discs for white
wood and sealer sanding• Load resistant coating• Unique construction provides
excellent finish• Convenient disc roll form, 125 or
250 discs per roll
Item # Grade Min. Order Discs/Roll5” Dia. x No Dust Holes - 415U/415NMM477223* 80 1 125
3M™ Stikit™ Disc Hand Pad
• Constructed of neoprene rubber with a nylon cloth face and an elastic handband
• Designed to securely hold the disc, but allows easy removal
Item # Size Description Min. OrderMM411063* 5" x 1" Rubber Face 10
MM484229* 5" x 1" Blue Face 10
3M™ Stikit™ Disc Roll - Paper216U Engineered
• Aluminum oxide - A wt. paper• Load resistant coating• Convenient disc roll form, 125 or
175 discs per roll
Item # Grade Min. Order Discs/Roll5” Dia. x No Dust HolesMM401428 P80 1 125
MM401426* P120 1 125
MM401425* P150 1 175
MM401423* P220 1 175
5” Dia. x 5 Dust HolesMM01623* P220 1 175
3M™ Stikit™ Disc PadNo Dust Holes
• 5” non-vac• Use with Stikit™ Discs• Medium, standard profile, general
purpose • Good adhesion, easy removal• Durable plastic hub• Conformable foam body
Item # Size Thread Ext.
Face Speed Min. Order
MM05575 5" x [¾]" [5/16]-24 Blue 10000 RPM/ 12000 OPM
1
3M™ Stikit™ Disc Roll - Paper236U Engineered
• Aluminum oxide - C wt. paper - open coat Gold Color
• Load resistant coating• Durable, tear resistant backing• Convenient disc roll form, 100 discs
per roll
Item # Grade Min. Order Discs/Roll5" Dia. x No Dust HolesMM86489* P100 1 100
MM55542* P120 1 100
MM86493* P220 1 100
3M™ Stikit™ Low Profile Finishing PadNo Dust Holes
• 5” non-vac• Soft foam body, best for finishing• For fine finish and outstanding
conformability• Use on random orbital sanders only• Recommended for grades 220 and
finer
Item # Size Thread Ext.
Face Speed Min. Order
MM05545 5" x [11/16]" [5/16]-24 Brown 12000 RPM/ 12000 OPM
1
268
3M™ Stikit™ Disc Roll - Paper426U General Use
• Silicon carbide - A wt. paper
• General purpose discs for white wood and sealer sanding
• Load resistant coating• Unique construction
provides excellent finish• Convenient disc roll form,
125 or 250 discs per roll
Item # Grade Min. Order Discs/Roll5” Dia. x No Dust HolesMM127777 120A 1 125
MM277783 150 1 175
3M™ Stikit™ Sheet Roll System216U, 415U, 415N
• 216U: P-graded aluminum oxide mineral coated - durable A wt. paper backing; load resistant coating; excellent for sanding varnish, sealers and light-colored substrates and whitewood
• 415U: Silicon carbide mineral coated on a durable A wt. paper backing; load resistant coating; ideal for hand or light portable sanding of wood, sealer, varnish, and lacquer
• 415N: Silicon carbide mineral coated on a durable A wt. paper back-ing; load resistant coating; ideal for whitewood and sealer sanding
Item # Grade Min. Order2-3/4" W x 45 Yd. - 216UMM02596* P150 10
MM02595* P180 1
MM102594* P220 10
MM02698* P80 6
MM02697* P100 6
MM02696* P120 1
MM02695* P150 1
3M™ Stikit™ Dust-Free Low Profile Finishing Disc Pad
Dust Free
• For 5" Stikit™ dust-free discs• Works on most standard dust-free
sanders• Use on random orbital sanders only• Recommended for grades 220 and
finer
Item # Size Thread Ext.
Face Speed Min. Order
MM05645* 5" x [11/16]"
[5/16]-24 Brown 12000 RPM/ 12000 OPM
10
3M™ Stikit™ Refill Roll System426U
• Blocks are made of tough plastic for long life and durability
• Sand into corners with the flat end and into curved or contoured areas with the rounded end
• The abrasive used is silicon carbide coated on an A wt. paper backing with a load resistant coating
Item # Width x Length Grade Min. Order426UMM278131 2[½]” x 95” 220A 10
MM645010 2[½]” x 125” 320A 10
MM278186 3[¼]” x 55” 100A 10
MM278209 3[¼]” x 80” 150A 10
MM278223 3[¼]” x 95” 220A 10
MM149330 3[¼]” x 100” 320A 10
Stikit Sanding BlockMM445203* 2[½]" W - 1
MM445204 3[¼]" W - 1
269
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Wetordry™ Abrasive Sheet - Paper401Q, 413Q, 431Q
• 401Q: A wt. paper - silicon carbide; construction provides longer life, faster cut, more uniform finish; designed for wet or dry sanding of wood coatings that require a fine finish
• 413Q: C wt. paper- silicon carbide; excellent conformability
• 431Q: C wt. paper - silicon carbide; heavyweight paper backing for increased durability
Item # Grade Min. Order413Q - 9” W x 11” LMM02004* 320 1
3M™ Wide Belt - Cloth240D, 241D, 340D, 341D General Use
• Aluminum oxide on a durable X wt. cotton cloth backing
• 340D is an open coat belt that provides good cut with less loading
• 341D is a closed coat belt that provides great finish
• Excellent all-around abrasive belt for everyday use
Item # Grade Min. Order36” W x 75” L - 340DMM03969* P80 5
MM03971* P120 5
37” W x 60” L - 340DMM03949* P60 5
MM03950 P80 5
MM03951* P100 5
MM03952 P120 5
MM06829 P180 5
MM06830* P220 5
37” W x 75” L - 340DMM03930* P80 5
MM03931 P100 5
MM03932 P120 5
43” W x 75” L - 340DMM70472* P60 3
MM03993* P80 5
MM03994 P100 5
MM03995 P120 5
3M™ Wide Belt - Cloth370DZ Engineered
• Premium aluminum oxide mineral open coated on a durable Y weight backing
• Designed for intermediate wood sanding operations where premature loading or clogging may be a problem
Item # Grade Min. Order37” W x 60” LMM14686* 80 3
MM76928* 150 5
3M™ Wide Belt - Cloth970DZ Purple High Performance
• Cubitron™ Abrasive Grain on a heavy Y wt. cloth, open coat
• Provides extremely long life, and uniform finish
• Performs well on all wood species• Reduced burning when performing
"end-grain" sanding applications• 3M™ Xodust™ Technology reduces
static and airborne dust levels when used with an efficient dust-collection system
Item # Grade Min. OrderMM55807* P120 5
3M™ Woodworking Sanding PadGeneral Use
• Abrasives two sides• Conformable, flexible, and
convenient
Item # Grade Min. OrderMM51066 Fine 1
MM51065* Medium 1
270
Scotch-Brite™ Multi-Flex Sheet RollGeneral Use
• Handy dispenser package• Tough, highly conformable and
sharp-cutting• Great for cleaning and finishing
surfaces by hand• Denibbing coatings
Item # Size Color/Grade Min. OrderMM07521 8" W x 20’ L Maroon/VFN 1
Scotch-Brite™ Gray Production Clean and Finish Disc
Item # Description Color SizeMM116002* Ultra Fine Gray 5”
MM90392 Gray 6”
Scotch-Brite™ Maroon Production Clean and Finish Disc
Item # Description Color SizeMM116001 Ultra Fine Maroon 5”
Scotch-Brite™ Pad HolderGeneral Use
• Use with Scotch-Brite™ hand pads or roll material cut to 4" x 6"
• Provides increased leverage and eliminates "finger" marks
Item # Size Min. OrderMM961* 3[½]" W x 4[¾]" L 1
Scotch-Brite™ General Purpose Hand Pad 6” x 9”
• For hand finishing and cleaning of composites
• Ideal for wood finishing, paint prep, general cleaning
• Sealer scuffing• Defuzzing white wood• Denibbing coatings• Scuffing between coats• Produce a final hand rubbed finish
Item # Color Min. Order DescriptionMM7440* Tan 1 Heavy Duty
MM7448 Light Gray 1 Ultra Fine
MM7447 Maroon 1 All Purpose
MM7445* White 1 Light-Duty
271
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Scotch-Brite™ Production Clean & Finish DiscFor Solid Surface Materials
• Delivers high cut, long life and better finish
• Used to achieve low gloss finishes (less than 45) on solid surface materials
• Aluminum oxide mineral
Item # Grade Min. Order5” Dia. - Hookit™ Attachment SystemMM29292* AVFN 40
MM29294* S ULF 40
6” Dia. - Hookit™ Attachment SystemMM100661 Red - Very Fine 40
Scotch-Brite™ Production Clean and Finish Disc
• For final buffing• 11-1/4” to fit GEM Sanders• Conversion pad needed to use Scotch
Brite disc to switch sander from Hookit II to Hookit (part number MM4451891)
Item # Description Color SizeMM130037 Hookit II Red 11[¼]”
MM130038 Hookit II Gray 11[¼]”
Scotch-Brite™ Radial Bristle Disc
• Curved thin bristles sweep into grooves, crevices, carvings, inset corners and other tricky-to-finish areas
• Use for light sanding and polishing, vein sanding, defuzzing, denibbing and sanding raised grain between sealer coats
• Slow-wearing resin construction• Non loading• Safe handling and operation - no flying wires• Use on die grinders (3200 RPM or less) or on electric or
pneumatic drills with operating speeds of 1500-3200 RPM• Multiple discs can be mounted to form a brush• Use one or two radial bristle discs on a 990 mandrel for
thin spindle sanding
Item # Grade Description Min. Order3” Dia. x 3/8” ThickMM30126* 80 Yellow 80
Scotch-Brite™ Surface Conditioning RollFor Top Coat Rubbing
• Lofty, conformable non-woven webs used with 3M™ Finesse-it™ Compound for final polish and high gloss finishes
Item # Type Size Mineral Min. OrderMM13637* Super
Polish4" x 30' Non-Abrasive
White3
MM08748* High Gloss
4" x 30' Non-Abrasive Peach
3
3M™ Series 24 Aerosol Adhesives
• 3M Foam & Fabric 24 Spray Adhesive is a fast-tack industrial grade spray adhesive
• Bonds foam to metal, fabric, wood and many other substrates
Item # Color Can Size Net Weight Min. Order
MM07862* Orange 20 fl. oz. 13.8 fl. oz. 12
3M™ Series 20 Aerosol Adhesives
• 3M Heavy Duty 20 Spray Adhesive forms a powerful, permanent bond to wood, laminate, metal, plastic and more
• Simply spray the adhesive on one or both surfaces, wait 15 seconds to 30 minutes, and press surfaces together to form a tight bond
• Our self-contained, highly portable dispenser allows for a variable width lace spray pattern to help ensure precise placement
Item # Color Can Size Net Weight Min. Order
MM07861 Clear 20 fl. oz. 13.8 fl. oz. 12
272
3M™ Series 27 Aerosol Adhesives
• 3M Multi-Purpose 27 Spray Adhesive bonds paper, cardboard, fabrics, soft foams, plastic films, fiberglass insulation and other lightweight materials. Simply spray the adhesive on one or both surfaces, wait 15 seconds to 10 minutes, and press surfaces together to form a tight bond
• Our self-contained, highly portable dispenser provides a mist spray pattern to help ensure better coverage.
Item # Color Can Size Net Weight Min. Order
MM07832* Clear 20 fl. oz. 13.05 fl. oz. 12
3M™ White Grease Lithium Lube
• Provides good performance under high friction loads, rubbing and wiping action
Item # Size Color QuantityMM08875* 10.5 oz. White 12/case
3M™ Scotch-Weld™ Epoxy Assembly Adhesive
• 1:1 or 2:1 mix ratio that is ideal for bonding many substrates with different coefficients of expansion and contraction
• An alternative to mechanical or fusion fastening• Features greater design latitude,
cleaner lines, material substitution, less machining, lighter weight, and more durability.
Item # Color Series Size Min. OrderMM22648 Clear DP100 1.7 fl. oz. 12
MM82255* Translucent DP100NS 1.7 fl. oz. 12
3M™ Fastbond™ Contact Adhesive 30NF
• Water-based• Spray, roll, or brush apply• Post-formable and heat resistant• Product formulation as of September
2009 meets Ozone Transport Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA
Item # Size Min. OrderMM42765G/GRN 5 Gal 1
MM42745G/NEUT 5 Gal 1
MM42741G/NEUT 1 Gal 1
MM427452G/NEU 52 Gal 1
3M™ Scotch-Weld™ Cylinder Spray Adhesive Equipment and Accessories
Item # DescriptionH ApplicatorMM25039* H Applicator, Includes 4001 Tip
Spray TipsMM61990* 4001 Spray Tip
MM61707* 9501 Spray Tip
HosesMM61988* 12 ft. Hose
MM61989* 25 ft. Hose
273
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Scotch-Weld™ Hi-Strength 98NF Cylinder Spray Adhesive
• High solids, high coverage adhesive• fast tacking and designed for high
pressure laminations; especially decorative laminate to particleboard
• Fast drying formulas to help speed assembly
• High heat and moisture resistant to help protect bonds
• Nonflammable solvent and propellant adhesive
• Product formulation as of September 2009 meets Ozone Transport Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA
Item # Color Size Net Weight Min. Order
MM61675* Clear 37 lb. 26.2 lb. 1
MM61678* Red 37 lb. 26.2 lb. 1
MM61677 Clear 400 lb. 371.7 lb. 1
MM18852 Clear - 55 Gal 1
3M™ Scotch-Weld™ Hi-Strength 94CA Cylinder Spray Adhesive
VOC-Compliant
• High performance, postformable industrial grade spray adhesive
• Fast tacking adhesive designed for high pressure laminations
• Contains very low VOC’s; SCAQMD Compliant Contact Adhesives
• Little waste, non-telegraphing spray pattern• Fast drying, solvent based for bonding in
1 - 5 minutes• GREENGUARD Indoor Air Quality
Certified: Awarded GREENGUARD’s more stringent Children & Schools Certification and exceeds LEED IEQ Credit 4.1 Low Emitting Materials: Adhesive and Sealants requirements
• Product formulation as of September 2009 meets Ozone Transport Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA
Item # Size Color Min. Order5 Gallon PailMM25016 5 Gal Clear 1
MM61666 5 Gal Red 1
55 Gallon DrumMM25017* 55 Gal Clear 1
MM61667* 55 Gal Red 1
30 lb. CylinderMM61703 30 lb. Clear 1
150 lb. CylinderMM61664 150 lb. Red 1
300 lb. CylinderMM61705 300 lb. Clear 1
3M™ Scotch-Weld™ Neoprene Contact Adhesive 10
• Neoprene contact adhesive; can be applied with brush or roller
• Bonds high pressure plastic laminates to wood, particleboard, metal and other surfaces
• Heat and creep resistant bond
Item # Size Min. OrderMM20274* 1 gallon 4
274
Hot Melt Applicator™ EC
• Most versatile design• Uses pre-set temperature modules
to operate with most 3M™ Scotch- Weld™ Hot Melt adhesives - both standard and low-melt
• Stroke adjuster allows repeatable output quantities
• Palm trigger and on-off switch
Item # Adhesive Type/Cartridge StyleMMECPOLYGUN* Q and LMQ
Hot Melt Applicator LT with Quadrack Converter & Palm Trigger
• Easy to use, simple and rugged construction
• Designed exclusively for low melt Scotch-Weld™ adhesives
• Palm trigger design for dispensing of longer sticks
Item # Adhesive Type/Cartridge StyleMM89447* LM Q
Scotch-Weld™ Hot Melt Applicator TCwith Quadrack™ Converter & Palm Trigger
• Easy to use, simple and rugged construction
• Designed for standard Scotch-Weld™ hot melt adhesives, 5/8” dia. x 8” L
• Palm trigger design for dispensing of longer sticks
Item # Adhesive Type/Cartridge StyleMM89445 Q
Scotch-Weld™ Hot Melt Applicator TC
• Thumb controlled dispensing• Formally known as the Polygun™ TC• Use 5/8” dia. x 2” L• Applicator tip MM9921 included
Item # Adhesive Type/Cartridge StyleMMTCPOLYGUN TC
275
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Scotch-Weld™ Adhesives
• 100% solid, solvent freethermoplastic resin
• Assemblies can be movedimmediately
• No space or energy consumedfor drying
• Also available in low temperatureapplied versions
• Reaches handling strength in seconds• Applied through 3M™ Scotch-Weld™ hot melt applicators
Item # Size Net Weight
Applicator Needed
3738 Tan Applied at 350-375° F
MMTCQ3738-8 [⅝]" dia. x 8" L 11 lb. MM89445
MMTC3738-2* [⅝]" dia. x 2" L 11 lb. MMTCPOLYGUN
MMAE3738-12* [½]" dia. x 12" L 11 lb. MMPOLYGUNAEII
3762 Tan Applied at 350-375° F
MMTCQ3762-8 [⅝]" dia. x 8" L 11 lb. MM89445
3762LM Light Amber Applied at 265° F
MM3762LMQ* [⅝]" dia. x 8" L 11 lb. MM89445
MMPG3762LM-3* 1" dia. x 3" L 22 lb. -
3764 Clear Applied at 350-375° F
MMTCQ3764-8 [⅝]" dia. x 8" L 11 lb. MM89445
MMTC3764-2* [⅝]" dia. x 2" L 11 lb. MMTCPOLYGUN
3792 Clear Applied at 350-375° F
MMTCQ3792-8 [⅝]" dia. x 8" L 11 lb. MM89445
MMTC3792-2 [⅝]" dia. x 2" L 11 lb. MMTCPOLYGUN
MMAE3792-12* [½]" dia. x 12" L 11 lb. MMPOLYGUNAEII
3792LM Clear Applied at 265° F
MM3792LMQ [⅝]" dia. x 8" L 11 lb. MM89445
MM3792LMTC* [⅝]" dia. x 2" L 11 lb. MMTCPOLYGUN
3M™ Hi-Strength 90 Aerosol Spray Adhesive
• 3M Hi-Strength 90 Spray Adhesive is our fast-drying,transparent spray adhesive that bonds on concrete,wood, MDF, laminates, polyethylene and more
• It’s extremely strong bond gives you fast results tokeep projects moving forward
• This industrial grade formula is easy to dispense andapply directly to surfaces and provides the addedbenefit of high heat and moisture resistance
• Product formulation as of September 2009 meetsOzone Transport Commission (OTC) model rulesfor adhesives and sealants for the following states:CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT,and VA
Item # Spray Type Can Size Net Weight Min. OrderMM4976 Traditional 24 fl. oz. 17.6 oz. 12
3M™ Scotch-Weld™ Urethane Assembly Adhesive
• Cure at room temperature or with heat to providetough, impact-resistant bonds with high peel strength
• Good adhesion to a wide variety of substrates, especiallywoods, plastics, and primed or painted metal
Item # Color Series Size Min. Order
MM82252* Off-White DP605NS 1.7 fl. oz. Duo-pack
12
3M™ Super 77 Multipurpose Spray Adhesive
• Permanently attach foils, carpeting,lightweight foams, paper, cardboard,felt and cloth to painted or unpaintedmetals, wood and hardboard
• Excellent for jobs and displays infurniture - bonds thin decorative film,foils and fabric
• Versatile - securely bonds mostlightweight materials
• Fast, aggressive tack, high-coverage,fast drying, transparent adhesive
• Product formulation as of September 2009meets Ozone Transport Commission (OTC) modelrules for adhesives and sealants for the following states:CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA
Item # Color Can Size Net Weight Min. Order
MMSPRAY77 Clear 24 fl. oz. 16.75 oz. 1
276
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy 25 D Adhesive
• 100% solids, single component• Moisture curing urethane• Eliminates metering, mixing and curing• Low VOC - no drying equipment• MMTE031 & MMTS230 ideal for
attaching solid surface material to countertops and cabinets and for attaching wood blocks to the bottom of solid surface materials
• 10 fl. oz. cartridges
Item # Description Open Time
Set Time Min. Order
MMTE100 TE100 2 min. 1 min. 6
MMTS230* TS230 4 min. 2.5 min. 6
3M™ Jet-Weld™ Thermoset AdhesiveFor Solid Surface Materials
• Ideal for attaching solid surface material to countertops and cabinets and for attaching wood blocks to the bottom of solid surface materials
• 100% solids, single component• Moisture curing polyurethane• Eliminates metering, mixing and curing• Low VOC - no drying equipment• 10.0 fl. oz. cartridge
Item # Open Time Set Time Case Qty.MMTS230* 4 min. 2.5 min. 6
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy Adhesive System
• Hand-held• Preheater holds up to four (4) 10 fl. oz.
cartridges• 1 minute set time, 2 minute open time• Helps simplify production as well as save
energy• Eliminates nails and other mechanical
fasteners in many applications to help save finishing steps
Item # DescriptionApplicatorMM23563* Applicator
PUR-EZ250 AdhesivesMM23541* Plastic/Wood Adhesive
3M™ Scotch-Weld™ Polyurethane Reactive (PUR) Easy Adhesive System
• Hand-held• Preheater holds up to four (4) 10 fl. oz.
cartridges• Fast initial set and handling strength
in as few as 5 seconds help eliminate or minimize fixturing and speed assembly
• One-component, moisture-curing eliminates metering, mixing, and curing equipment
• Helps simplify production as well as save energy• Greater than 1,000 lbs. holding power within minutes exceeds
strength of conventional hot melt and PVA adhesives• Eliminates nails and other mechanical fasteners in many
applications to help save finishing steps• MM17010 adhesive cartridge: very fast set time, best for bonding
wood and plastics, ideal for small to medium parts assembly• MM17030 adhesive cartridge: medium set time, low viscosity,
best for bonding wood to select plastics, thin glue line• MM17060 adhesive cartridge: long open time, lower viscosity,
thin glue line
Item # DescriptionMM17060* Adhesive Cartridge - 2.5 Open Time
277
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Double Sided Tape
• Durable adhesion for dependable performance
• Fast for improved productivity• User friendly and neat to save set
up and clean up
Item # SizeMM23782* 1” x 36 yd.
Scotch-Blue™ Painter’s Tape for Multi-Surfaces 2090Specialty Masking 232
• Ideal for painted walls and trim, woodwork, glass and metal
• 14-day clean removal• For interior and exterior use• UV and sunlight-resistant• Medium adhesion• Flexible crepe backing for
exceptional conformability
Item # Size Case Qty.MM06818* 1" x 60 yd. 36
3M™ Crepe Masking Tape 231High Performance
• A premium high performance paper masking tape designed to perform well in most industrial painting situations, including the use of bake cycles
• Excellent conformability and easy tear
• Can be used at bake temperatures up to 300° F for 30 minutes and removes without adhesive transfer
• Excellent paint flake resistance
Item # Size Case Qty.MM03777* 24mm x 55m 36
MM04111* 36mm x 55m 24
Scotch® Box Sealing Tape 371
• Pressure-sensitive rubber resin adhesive to instantly seal cartons
• Biaxially oriented polypropylene backing is easy to handle and dispense
• Resists abrasion, moisture, chemicals and scuffing
• Conforms around edges and over rough surfaces for a tight seal
• Good edge tear and split resistance
Item # Size Color Case Qty.MM15873* 48mm x 100m Clear 36
278
3M™ Clean-View Pad 5850
• Multi-sheeted adhesive system designed to protect paint booth windows and light fixtures from over- spray
• Helps eliminate the labor and mess associated with conventional cleaning solvents and chemicals
• Transparent sheets provide light transmittance
• Individually tabbed and numbered sheets remove easily and indicate remaining applications
• Eliminates the re-application of single layer protection films
• Acrylic adhesive removes cleanly• Reduces labor expense, downtime and use of chemicals for cleanup
Item # Size Min. OrderMM55042* 24" W x 50" L 6
3M™ Paper Masking Tape 2214General Use
• A general purpose paper tape for holding, bundling, sealing, non-critical masking and a vast number of other jobs where a pressure-sensitive tape is needed
• Typically used at room temperature but will function up to 150° F (66° C) for periods up to 30 minutes; should not be subject to outdoor exposure
• Resists lifting or curling/helps reduce rework
• Resists slivering, yet hand tearable
Item # Size Case Qty.MM45587* 12mm x 55m 72
MM26074* 18mm x 55m 48
MM26076* 36mm x 55m 24
3M™ Masking Tape 2307General Use
• A general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other jobs where a pressure-sensitive tape is needed
• Typically used at room temperature, but will function up to 200° F (93° C) for up to one hour
• Should not be subjected to outdoor exposure; tape may become very difficult to remove
Item # Size Case Qty.MM71117* 18mm x 55m 48
MM71118 24mm x 55m 36
MM71119 36mm x 55m 24
MM71120 48mm x 55m 24
Scotch® Masking Tape for Hard-to-Stick Surfaces 2060
Specialty Masking
• A tape to mask lacquer paints from surfaces and to mask lacquered surfaces from other types of paints and lacquers
• Removes with little or no adhesive transfer to most surfaces for up to three days after application, even when subjected to sunlight exposure
• Tape should be removed at a 90° angle• Resists curl off when coated with paints
and lacquers• Resists paint and lacquer flaking when the
tape is removed from the job• Typically used at room temperature, but will function
up to 200° F (93° C) for one hour• Should not be subject to prolonged outdoor exposure;
tape may become difficult to remove
Item # Size Case Qty.MM71132* 24mm x 55m 36
MM71133* 36mm x 55m 24
MM71134 48mm x 55m 24
279
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
3M™ Paper Masking TapeGeneral Use
• A utility purpose paper tape for holding, bundling, sealing, non-critical masking and a vast number of other jobs where a pressure-sensitive tape is needed
• Typically used at room temperature, but will function up to 200° F (93° C) for periods up to 1/2 hour
• Good holding power to help resist lifting or curling
• Should not be subjected to outdoor or UV exposure
Item # Size Case Qty.MM71183* 12mm x 55m 72
MM71180* 24mm x 55m 36Canister Spray Equipment
Item # DescriptionCCGN23ADJ Spray Gun for cylinders w/65° adjustable fluid tip
CCMH982 65° Replacement Tip
CCMH973 12 ft. hose
CCMH978 25 ft. hose
Tartan™ Strapping Tape 8934
• General purpose strapping tape designed for light-duty strapping applications such as reinforcing boxes and bundling light items
Item # Size Min. OrderMM86519* 18mm x 55m 48
Premium Quality Masking Paper
• Premium quality is designed to minimize bleed-through
Item # Size Min. OrderMM77402* 6" x 60 yd. 12
Scotch® Filament Tape 897
• Translucent polypropylene film backed product reinforced with glass yarn filaments
• Light-duty tensile strength, nick resistance, abrasion resistance and good handling for utility applications
• Suitable for bundling and reinforcing and pallet unitizing applications
Item # Size Min. OrderMM86522* 9mm x 55m 96
280
Weldwood® Carpenter’s Glue
• Professional quality aliphatic resin wood and multi- purpose glue
• High strength bond• Sets fast, grips tight and sands easily when dry• Heat, water and solvent resistant• Non-toxic• Yellow
Item # Size Case Qty.DA00494 5 gallons 1
DA00495* 55 gallons 1
Weldwood® Plastic Resin Glue
• Ideal for interior wood applications• Excellent water resistance• Cured glue resists fungi, rot, oil,
gasoline, and many solvents• Powdered, ureaformaldehyde wood
glue activated by mixing with water• Forms a bond stronger than the wood
itself• Meets Federal Specification A-A-3052
Item # Size Color Qty./CaseDA00204* 4[½] lb. Tan 4
100% Silicone Rubber Sealant
• Superior quality, multi-purpose sealant• Long-lasting flexibility and excellent adhesion• Provides a weatherproof, watertight seal• Resists cracking, crumbling and chalking• Interior/exterior use• 50 year durability guarantee
Item # Color Size Case Qty.DA08646* White 10.1 oz. 12
DA08641 Clear 10.1 oz. 12
DA08642* Black 10.1 oz. 12
DA08649 Almond 10.1 oz. 12
Alex Plus® Acrylic Latex Caulk Plus Silicone
• Superior quality, multi-purpose acrylic latex caulk plus silicone
• Highly flexible and durable• Excellent adhesion• Cured caulk is mildew resistant• Interior/exterior use• Paintable• Water clean-up• 35 year durability guarantee
Item # Color Size Case Qty.DA18101 White 10.1 oz. 12
DA18071 Clear 10.1 oz. 12
DA18120* Brown 10.1 oz. 12
DA18118* Slate Gray 10.1 oz. 12
DA18111* Cedar Tan 10.1 oz. 12
DA18124* Dark Bronze 10.1 oz. 12
DA18126* Black 10.1 oz. 12
DA18135 Almond 10.1 oz. 12
281
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Dynaflex 230® Premium Elastomeric Latex Sealant
• Combines the superior flexibility and durability of a silicone with the easy tooling, excellent paintability, and low odor of a latex
• Provides excellent adhesion and a watertight, weatherproof seal
• Cured caulk is mildew resistant• Interior/exterior use• Water clean-up• 35 year durability guarantee
Item # Color Size Case Qty.DA18301 Aluminum Gray 10.1 oz. 12
Phenoseal Caulk10 Ounce
• Used both for caulking and adhesive purposes • It bonds, caulks and seals on wood, masonry, ceramic,
fiberglass, glass, metal, canvas and numerous other substrates
• Easy application, easy clean-up• Flexible, rugged, waster-resistant, paintable and mildew
resistant• Non-toxic, non-flammable• 10 oz. cartridge fits into a standard caulking gun
Item # ColorGL110AM Almond
GL110TR Translucent
GL110W White
2P-10 Installation Kit with Case
• Complete starter kit in a hardshell case
• Kit includes: 2 oz. Jel Adhesive (1), 2 oz. Thick Adhesive (1), 2 oz. Medium Adhesive (1), 2 oz. Thin Adhesive (1), 2 oz. Activator (1), 2 oz. Debonder (1), and MicroTips
Item # DescriptionFC2P10KIT* Starter Kit
Kit RefillsFC2P10THIN2OZ* 2 oz. Thin Adhesive
FC2P10THICK* 2 oz. Thick Adhesive
FC2P10JEL2OZ* 2 oz. Jel Adhesive
FC2P10ACTIVAT* 2 oz. Activator
FC2P10DEBONDE* 2 oz. Debonder
TFL50 Dry Lube Spray
• 10 oz. can• Long lasting professional thin film lube• Free of any ozone depleting chemicals• Fluorocarbon dispersion• Contains no Class I or Class II substances as
defined under the Clean Air Act• Clean, non-staining• Static free, non-conductive• Dries on contact• Non-transferrable• Easy to use
Item #DSTFL50
282
2P-10 Adhesive Gel
• 10 second bonding• 30 seconds to cure• Designed for vertical surfaces• Gap filling capacity• Works on most surfaces• Will not run
Item # DescriptionFC2P10JEL 8 oz.
2P-10 Adhesive Gel
• 10 second bonding• 30 seconds to cure• Designed for vertical surfaces• Gap filling capacity• Works on most surfaces
Item # DescriptionFC2P10THIN10Z* 10 oz
Glu-Bot
• Wide mouth for easy filling• Designed for vertical application• Wide bottom for extra stability• Suction prevents dripping• Includes two replaceable tips (1 Blade tip
and 1 Yorker tip included)
Item # Description QuantityFCGLUBOT* 16 oz. 1
Power Magnets
• High-performance neodymium magnets
• They are versatile and powerful and can be used to make invisible magnetic catches, as well as hold anything and everything to metal
Item # Pack Qty.FCPOWER MAG* 10
Sanding Sponge Pads
• Extremely flexible and tear resistant• Can be used wet or dry• Aluminum Oxide or Silicon Carbide• Foam backing
Item # Thickness Width Length Grit Pack Qty.
ID3000320* ¼" 4[½]” 5[½]” Fine 20/pk
ID3000400* ¼" 4[½]” 5[½]” Fine 20/pk
ID3000800* ¼" 4[½]” 5[½]” Super Fine
20/pk
ID30001200* ¼" 4[½]” 5[½]” Micro Fine
20/pk
2P-10 Solo Activator
• • Accelerates curing of 2P-10 adhesive
Item # DescriptionFC2PACT12OZ 12 oz.
283
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Abrasive BlocksSanding Pads
• Dense low flexibility backing sponge• Modified synthetic resins• Anti-clogging lubricating layer• Four sanding surfaces• Fast hand sanding in wet or dry
applications• Designed for leveling of flat surfaces• Sanding of raw white wood 36-180
grits removes orbital sander marks• Fine sanding of primers or top coats
120-220 grits
Item # Grit Pack Qty.3-3/4” x 3-3/4” x 1” 4 Sided - Aluminum OxideID320080* 80 250/pk
ID3200100* 100 250/pk
ID3200180* 180 250/pk
ID3200220* 220 250/pk
4-3/4” x 3-3/4” x 1/2” 2 Sided - Silicon CarbideID3100100* 100 250/pk
ID3100220 220 250/pk
Aluminum Oxide Belts
• High quality Aluminum Oxide grain• Tough X-weight cloth backing• Strong glued joint• Consistent sizing
Item # Size Grit Pack Qty.3” x 21”IDB3X2140* 3” x 21” 40 10
IDB3X2160* 3” x 21” 60 10
IDB3X2180* 3” x 21” 80 10
IDB3X21100* 3” x 21” 100 10
IDB3X24120* 3” x 24” 120 10
3” x 24”IDB4X2436* 4” x 24” 36 10
4” x 24”IDB4X2460* 4” x 24” 60 10
IDB4X2480* 4” x 24” 80 10
IDB4X24100* 4” x 24” 100 10
Backup Pads
• Maximum RPM speed 10,000• Shock resistant foam body
Item # DescriptionPSA Backup PadsID6003* 6" dia. x No Holes
Hook & Loop Backup PadsID6002* 5" dia. x No Holes
ID6004* 6" dia. x No Holes
Nylon WebScuff Pad
• Durable nylon woven pads• For quick scuffing of paint, primer
and fillers• Adaptable to shapes and contours• Usable on both sides, no waste• Resistant to tearing• Consistent surface finish• Can be used with water• 6" x 9" • 20 pads per box
Item # Color Grit Pack Qty.ID8500G* Gray Fine 20/pk
284
Rhynalox PlusLineAluminum Oxide Abrasive Sheet
• D/C/B wt. latex paper • Extra flexibility• Anti-clogging lubricant layer• High performance on softer materials• High quality finish• Dry sanding • Ideal for sanding and finishing fillers,
primers, top and clear coats, composite material, wooden surfaces and wood coatings
• 50 Sheets per pack• 9” W x 11” L
Item # Grit Pack Qty.ID3150 150 50/pk
ID3220 220 50/pk
ID3240* 240 50/pk
ID3320 320 50/pk
Rhynalox & Rhynodry WhiteLineAluminum Oxide Abrasive Sheet
• Heavy-duty D/C wt. paper• High cutting power, very high stock removal• High performance and good surface finish• Anti-clogging lubricant layer• Dry sanding• Ideal for sanding fillers, primers, and wood
and smoothing or cleaning walls• 9” x 11” - 50 sheets per pack
Item # Grit Pack Qty.ID3100* 100D 50/pk
ID3120* 120D 50/pk
Rhynalox Aluminum Oxide PSA DiscD wt. White Line
• Production-grade D wt. paper• It is manufactured on the basis of
productivity, efficiency, durability, and is extremely cost effective
• High performance• Long life• High cut power
Item # Grit Pack Qty.5” Dia. x No Dust HolesID5060* 60 100/pk
ID5080 80 100/pk
ID50100 100 100/pk
ID50120 120 100/pk
5’’ Dia. x 5 Dust HolesID5160* 60 100/pk
ID5180* 80 100/pk
ID51120* 120 100/pk
6” Dia. x No Dust HolesID6080* 80 100/pk
ID60100* 100 100/pk
ID60120 120 100/pk
285
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Rhynogrip RedLineAluminum Oxide Hook & Loop Rolls
• Heavy duty D wt. paper• Extra flexibility in the finer grits• High cut power and efficiency• High performance on hard materials• Anti-clogging lubricant layer; longer
life• Ideal for scuffing and rectifying clear
coats, sanding and finishing composite materials, wooden surfaces and metal surfaces and coatings
Item # Grit Pack Qty.4-1/2” x 10 Yd.ID8200100* 100 5 rolls/pk
Rhynogrip RedLineAluminum Oxide Hook & Loop Disc
• D wt. paper/ B wt. paper with velour backing• Extra flexibility in the finer grits• High cut power and efficiency• High performance on hard materials• Anti-clogging lubricant layer; longer life• 120 grit C wt., all others A wt.• Ideal for scuffing and rectifying clear
coats, sanding and finishing composite materials, wooden surfaces and metal surfaces and coatings
• 11-1/4” discs for use with Gem Sander (Item #GMBWH)
Item # Grit Pack Qty.5” Dia. x No Dust HolesID510120* 120 50/pk
ID510150* 150 50/pk
ID510180* 180 50/pk
ID510220* 220 50/pk
5” Dia. x 8 Dust HolesID550120* 120 50/pk
ID550150* 150 50/pk
6" Dia. x No Dust HolesID620120* 120 50/pk
ID620150* 150 50/pk
ID620180* 180 50/pk
ID620220* 220 50/pk
ID620320* 320 50/pk
11-1/4” Dia. x No Dust HolesID620GEM100* 100 10/pk
ID620GEM150* 150 10/pk
ID620GEM180* 180 10/pk
ID620GEM220 220 10/pk
ID620GEM320* 320 10/pk
ID620GEM360* 360 10/pk
ID620GEM800* 800 10/pk
286
Item # Grit Pack Qty.5” Dia. x 8 Dust HolesID5560* 60 50/pk
ID5580 80 50/pk
ID55100 100 50/pk
ID55120 120 50/pk
ID55150 150 50/pk
ID55180 180 50/pk
ID55220 220 50/pk
ID55320* 320 50/pk
ID55400* 400 50/pk
ID55600* 600 50/pk
6” Dia. x No Dust HolesID6180 80 50/pk
ID61100* 100 50/pk
ID61120* 120 50/pk
ID61150* 150 50/pk
ID61220 220 50/pk
ID61400* 400 50/pk
ID61600* 600 50/pk
6” Dia. x 6 Dust HolesID6240* 40 50/pk
ID6260* 60 50/pk
ID6280* 80 50/pk
ID62100* 100 50/pk
ID62120* 120 50/pk
ID62150 150 50/pk
ID62180* 180 50/pk
ID62220* 220 50/pk
ID62320* 320 50/pk
ID62400* 400 50/pk
6” Dia. x 8 Dust HolesID63150* 150 50/pk
ID63220* 220 50/pk
Rhynogrip WhiteLineAluminum Oxide Hook & Loop Disc
• D/C wt. paper with velour backing, lubricant coating
• High cut power and efficiency• Anti-clogging lubricant layer• High performance and good surface
finish• Dry sanding• 50 Discs per box
Item # Grit Pack Qty.
5” Dia. x No Dust HolesID5280 80 50/pk
ID52100* 100 50/pk
ID52120 120 50/pk
ID52150 150 50/pk
ID52180* 180 50/pk
ID52220 220 50/pk
ID52320* 320 50/pk
ID52400* 400 50/pk
5” Dia. x 5 Dust HolesID5460* 60 50/pk
ID5480* 80 50/pk
ID54100* 100 50/pk
ID54120* 120 50/pk
ID54150* 150 50/pk
ID54180* 180 50/pk
ID54220* 220 50/pk
ID54320* 320 50/pk
287
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Rhynosoft Rolls1-Sided
• High flexibility backing sponge• Modified flexible synthetic resins• Anti-clogging lubricating layer• Machine or hand sanding• Wet or dry operations• Adaptable for rounded parts, contours• Shaping of contours P180 - P320• Fine sanding of primers, thermoplastics P400• Rolls allow exact length needed for the job• 4-1/2” W x 27-1/2 L
Item # Grit Pack Qty.4-1/2” x 27-1/2” yds. Sanding Pad RollID3700R320* P320 1 roll/pk
Rhynosoft Plus & RedLineSoftback Sponge
• C/D wt. latex paper with foam backing• High flexibility • Modified flexible synthetic resins• Anti-clogging lubricating layer• Machine or hand sanding• Wet or dry operations• Adaptable for rounded parts, contours• Shaping of contours: 180 - 320• Fine sanding of primers, thermoplastics: 400• Scuffing of primers, lacquers: 600-800• Finishing application: 1200
Item # Grit Pack Qty.4-1/2” x 5-1/2” Sanding PadsID3600P180 180 20/pk
ID3600P240* 240 20/pk
ID3600P320* 320 20/pk
ID3600P400* 400 20/pk
4-1/2” x 27-1/2” yds. Sanding Pad RollID3700R320* 320 1 roll/pk
Rhynosponge Sanding Sponge2-Sided
• Low density high flexibility backing sponge
• Modified synthetic resins• Anti-clogging lubricating layer• Silicone carbide abrasive for fast cut• Two sanding surfaces• Fast hand sanding in wet or dry
applications• Adaptable for rounded parts, contours• Shaping of contours P100-220• Sanding of raw white wood P100-220• Fine sanding of primers or top coats 220 grit• 1/2" thick• 250 sponges per pack
Item # Thickness Grit Pack Qty.4-3/4” x 3-3/4” x 1/2” 2 Sided - Silicon CarbideID3100100* ½" 100 250/pk
ID3100220 ½" 220 250/pk
288
Rhynostick WhiteLineAluminum Oxide PSA Disc
• D/C wt. paper with self-adhesive backing, lubricant coating
• High cut power and efficiency• Anti-clogging lubricant layer, long life• Easy release tabs• High performance and good surface
finish • Dry sanding• 100 Discs per box
Item # Grit Pack Qty.5” Dia. x No Dust HolesID5060* 60 100/pk
ID5080 80 100/pk
ID50100 100 100/pk
ID50120 120 100/pk
ID50150 150 100/pk
ID50180 180 100/pk
ID50220 220 100/pk
ID50320 320 100/pk
ID50400 400 100/pk
ID50500* 500 100/pk
5’’ Dia. x 5 Dust HolesID5160* 60 100/pk
ID5180* 80 100/pk
ID51120* 120 100/pk
ID51150 150 100/pk
ID51180* 180 100/pk
ID51220* 220 100/pk
ID51500* 500 100/pk
6” Dia. x No Dust HolesID6080* 80 100/pk
ID60100* 100 100/pk
ID60120 120 100/pk
ID60150 150 100/pk
ID60180* 180 100/pk
ID60220* 220 100/pk
6” Dia. x 6 Dust HolesID64220* 220 100/pk
Rhynostick RedLineAluminum Oxide PSA Disc
• D/C wt. paper with velour backing, lubricant coating
• High cut power and efficiency• Anti-clogging lubricant layer, long life• Superior finish and easy release tabs• High performance on hard materials • For solid surface and sanding of
fillers, fibers, and aluminum• 100 Discs per box
Item # Grit Pack Qty.5” Dia. x No Dust Holes
ID500100* 100 100/pk
ID500120* 120 100/pk
ID500150* 150 100/pk
ID500180* 180 100/pk
ID500220 220 100/pk
5” Dia. x 5 Dust HolesID540150* 150 100/pk
ID540180* 180 100/pk
6” Dia. x No Dust HolesID60080* 80 100/pk
ID600120* 120 100/pk
ID600150* 150 100/pk
ID600180* 180 100/pk
ID600220* 220 100/pk
ID600320* 320 100/pk
289
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
ColorFlex
• High viscosity acrylic latex caulk with silicone• Custom colored to match almost any host
color• Water-based, inorganic pigments are added
by computer formulation to the base caulk in order to achieve the variety of custom colors
• The cured product exhibits excellent adhesion and color retention
• Will shrink as it cures
Item # Size Color Pionite MatchKA1001TUBE* 4 oz. White SW806 Carnation White,
SW811 White, SW826 Angel White, SW836 Winter White
KA1003TUBE* 4 oz. Putty N/A
KA1006TUBE* 4 oz. Almond N/A
KA1075TUBE* 4 oz. Dolphin SG213 Opti Gray
KACPAB121* 4 oz. Nickel AB121 Opal Impression
KACPAT991* 4 oz. Wheat Fiber AT991 Wheat Fiber
KACPWC421* 4 oz. Cider WC421 Oiled Cherry
KACPWO581* 4 oz. Cinnamon WO581 Wisconsin Oak
KACPWO891* 4 oz. Butcherblock WO891 Sherwood Oak
KACPMT300* 4 oz. Dust MT300 Natural Limestone
ColorFlex II
• Custom colored, high-gloss acrylic caulk for decorative surfaces
• Can be used for sealing miter joints, setting backsplashes on counter decks, and caulking vertical and horizontal corners
• 4 oz. tube
Item # Color Pionite MatchKA2001TUBE* White N/A
SeamFil
• Match any laminate pattern, color or woodgrain by applying SeamFil directly or by mixing colors using color guides
• Scientifically blended to resist moisture, detergent, and other household products as effectively as the original plastic laminate
• Fills in seams, seals joints and repairs defects to laminated plastic surfaces
• Resists fading• Standard kit contains: 12 most popular SeamFil colors in 1 oz. tubes
- white, gray, tan, brown, black, primary yellow, primary red, orange, almond, retarder, spectrum green, and spectrum blue; polished putty knife; 1/2 pint of SF-99 solvent; and complete usage instructions
• Woodgrain kit contains: 12 SeamFil colors in 1 oz. tubes - white, brown, black, mahogany, maple, teak, birch, primary yellow, primary red, orange, butcher block, and retarder; polished putty knife; 1/2 pint of SF-99 solvent; and complete usage instructions
• Solvent is ideal for use in preparing joint, cleaning up excess SeamFil, print from laminate, and spray and rolling equipment
Item # Color Size Pionite MatchKA901 White 1 oz. N/A
KA902 Gray 1 oz. N/A
KA903* Dark Gray 1 oz. N/A
KA904 Tan 1 oz. N/A
KA913* Brown 1 oz. N/A
KA914 Black 1 oz. N/A
KA918* Mahogany 1 oz. N/A
KA919* Pink 1 oz. N/A
KA931* Maple 1 oz. N/A
KA933* Teak 1 oz. N/A
KA934* Gray Walnut 1 oz. N/A
KA935* Birch 1 oz. N/A
KA936* Primary Yellow 1 oz. N/A
KA937* Primary Red 1 oz. N/A
KA939* Olive 1 oz. N/A
KA940* Orange 1 oz. N/A
KA941 Almond 1 oz. N/A
KA942* Butcher Block 1 oz. N/A
KA943* Clear Gloss 1 oz. N/A
KA944* Retarder 1 oz. N/A
KA945* Spectrum Green 1 oz. N/A
KA946* Spectrum Blue 1 oz. N/A
KASPWC421* N/A 1 oz. WC421 Oiled Cherry
KASPWM951* N/A 1 oz. WM951 Honey Maple
KASTSFK (12) Assorted Standard Kit
(12) 1 oz. -
KAWGSFK (12) Assorted Woodgrain Kit
(12) 1 oz. -
KASF99* - [½] pt. -
KASF99QT* - 1 qt. -
290
Axiom 25
• Translucent silicone colors developed specifically for solid surfaces
• 10.3 oz. (305 ml), two piece cartridge system with screw on nozzle for superior bead control
• Cartridges filled under vacuum to eliminate air bubbles and fish eyes when applying bead
• Highly resistant to ultraviolet light, ozone, moisture, mildew, and extreme temperature variations
Item # Color Qty/CaseKAAXCLEAR Clear 12
KAAXWHITE White 12
KAAXBEIGE Beige 12
KAAXGRAY Gray 12
KAAXEARTH Earth 12
KAAXCHARCOAL Charcoal 12
KAAXBLUE* Blue 12
STA’-PUT® S120 Solvent Based Contact Adhesive
Nonflammable, Spray Grade
• High performance contact bond adhesive in a non-flammable solvent
• Suitable for bonding decorative laminate, wood, particleboard, metal, rubber, hardboard, plywood, leather, canvas and many other materials
• It is fast drying, oil and waterproof and requires no clamping
• Its high tack plus excellent combinability and green strength provides uniform high strength bonds under a wide variety of laminating conditions
• Quick Dry Time• High Strength Bonds• Aggressive Grab Tack • Good Spray Pattern• High Green Strength • Postformable• Excellent adhesion to many substrates • Long Open Time• 9 month shelf life• Made in USA by ITW TACC
Item # Size Description UN No.CCS12005C 5 Gal Clear UN2810
CCS12005R 5 Gal Red UN2810
CCS12055C 52 Gal Clear UN2810
CCS12055R 52 Gal Red UN2810
WoodFil Epoxy Stick
• A two-part, 7" x 7/8" dia., hand mixable epoxy putty stick used to repair and rebuild real wood
• Can be used for staple holes, seams at butt joints, nail holes, and more
• Completely fills the defect or damaged area and does not shrink
• 15-25 minute work-life and after 60 minutes it can be sanded, filed, drilled, machined, stained, and/or painted
• Easy to use, safe, contains no solvents, and does not require special storage
•
Item # Color Qty/CaseKAW9904MA* Maple 12
KAW9904WH* White 12
291
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
STA’-PUT® S150/S151 Post-Form Contact Adhesive
Flammable, Spray Grade
• Product formulation as of September 2009 does not meet Ozone Transport Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, MD, NJ and RI
• Solvent-based, high solids contact adhesive excellent for postforming applications
• Specifically formulated for use in bonding a wide variety of materials including decorative laminate, steel, particle board and rigid plastics
• Offers ease of use• Fast drying• Excellent heat resistance• Long open tack• 1 year shelf life - sealed container• Made in USA by ITW TACC
Item # Size Description UN No.CCS15105C* 5 Gal Clear UN1133
STA’-PUT® S170/S171 Solvent Based Contact Adhesive
Nonflammable, Brush/Spray Grade
• Product formulation as of April 2010 meets Ozone Transport Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA.
• Formulated for use in bonding a wide variety of materials, including, but not limited to: decorative laminates, metals (not copper), plywood, particleboard, polyurethane foam, and rigid plastics
• Quick Dry Time • High Strength Bonds• Aggressive Grab Tack • Good Spray Pattern• High Green Strength • Flatwork applications (non-postforming)• Excellent adhesion to many substrates • Long Open Time• 9 month shelf life - sealed container• Made in USA by ITW TACC
Item # Size Description UN No.CCS17005B 5 Gal Blue UN2810
CCS17055B 52 Gal Clear UN2810
CCS17105C 5 Gal Blue UN2810
STA’-PUT® S140 Contact AdhesiveFlammable, Brush Grade
• Product formulation as of September 2009 does not meet Ozone Transport Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, MD, NJ and RI
• Formulated for industrial use in bonding a wide variety of materials including decorative laminates, metals (not copper), plywood, particleboard, polyurethane foam, and rigid plastics
• Provides easy and uniform coverage in all types and sizes of industrial operations
• Quick Dry Time • High Strength Bonds• Aggressive Grab Tack • Brush or Roller Applied• High Green Strength • Excellent Heat Resistance• Excellent adhesion to many substrates • Long Open Time• 1 year shelf life - sealed container• Made in USA by ITW TACC
Item # Size Description UN No.CCS14005C* 5 Gal Clear UN1133
292
STA’-PUT® SPHS Low-VOC Canister Contact Adhesive
Nonflammable, Canister
• High strength bond and aggressive grab tack • Designed to bond wide variety of materials
including: laminate, wood products, most metals, urethane foams, and particleboard.
• VOC free and no CFCs• Has a drier pattern than most pebble-spray
adhesives• Exceptional heat and UV stability, water
resistance, and a long working time• Fast drying• User friendly - no cleanup required• 1 year shelf life - sealed container• Patent-pending propellant system• Made in USA by ITW TACC• 34lb. recyclable canister - return to ITW TACC to recycle• Product formulation as of September 2009 meets Ozone Transport
Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA.
Item # Size Description UN No.CCSPHS35ABC 34 lb. Clear UN3163
CCSPHS35ABR* 34 lb. Red UN3163
CCSPHS190ARC 190 lb. Clear UN3163
CCSPHS375C2V 375 lb. Clear UN3163
Titebond® II Dark Wood Glue
• Specifically formulated for darker woods
• Strong initial tack and fast speed of set to reduce clamp time
• Dries to a dark brown glue line which blends better with some selected wood species
• Outstanding sandability• Unaffected by finishes• Provides excellent resistance to heat,
solvents and mildew• Ideal for both hardwoods and
softwoods, as well as most other porous materials• Non-toxic, solvent free and cleans up with water
Item # Size Units/CaseFR3706 1 gallon 2
FR3707 5 gallons 1
STA’-PUT® SP80 Low-VOC Canister Contact AdhesiveFlammable, Canister
• Provides a high yield with a smooth, flat spray pattern
• Water-resistant, non-staining bond• Quick dry time• Aggressive grab with high green
strength• Greenguard, Children & Schools and
Indoor Air Quality Certified• 1 year shelf life - sealed container• GREENGUARD Indoor Air Quality
Certified: Awarded GREENGUARD’s more stringent Children & Schools Certification and exceeds LEED IEQ Credit 4.1 Low Emitting Materials: Adhesive and Sealants requirements
• Made in USA by ITW TACC• Product formulation as of September 2009 meets Ozone Transport
Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA.
Item # Size Description UN No.CCSP8013C 14 oz. Clear UN1133
CCSP8028C 27 lb. Clear UN1133
CCSP8028R 27 lb. Red UN1133
CCSP80140C 140 lb. Clear UN1133
CCSP80140R 140 lb. Red UN1133
CCSP80270C 270 lb. Clear UN1133
CCSP80270R* 270 lb. Red UN1133
CCSP8005C 5 Gal Clear UN1133
CCSP8005R 5 Gal Red UN1133
CCSP8055C 52 Gal Clear UN1133
CCSP8055R 52 Gal Red UN1133
293
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Titebond® II Fluorescent Wood Glue
• Visible under black light• Enables detection and removal of dried
glue before finishing• Passes ANSI Type II water-resistance• Veratile- bonds wood, hardwood, high
pressure laminate and particleboard• Excellent heat and solvent resistance• Fast set- shortens clamp time• Ideal for radio frequency (R-F) gluing
systems• Easy cleanup with water
Item # Size Units/CaseFR2316* 1 gallon 2
Titebond® II Extend Wood Glue
• Combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set
• Ideal for exterior applications that involve more complex assemblies
• It provides a translucent glue line, offers excellent sandability and is unaffected by finishes
• Offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials
• Compatible for use with Hot Press and radio frequency (R-F) gluing systems
Item # Size Units/CaseFR4134* 16 oz. 12
FR4136 1 gallon 2
FR4137* 5 gallons 1
Titebond® II Premium Wood Glue
• Ideal for exterior woodworking projects, including outdoor furniture, birdhouses, planters, mailboxes and picnic tables
• Water-resistant• Offers strong initial tack and outstanding
bond strength• Fast speed of set• Excellent sandability• FDA approved for indirect food contact• Ideal for radio-frequency gluing
systems• Non-toxic, solvent free, and cleans up
with water
Item # Size Units/CaseFR5006 1 gallon 2
FR5007 5 gallons 1
FR5008* 55 gallons 1
Titebond® III Waterproof Wood Glue
• An advanced, proprietary technology that offers superior bond strength
• Waterproof formula• Longer open assembly time and
lower application temperature• Non-toxic, solvent free and
cleans up with water - safer than traditional waterproof wood glues
• Strong initial tack and sands easily without softening
• FDA approved for indirect food contact (cutting boards)
• Ideal for both interior and exterior applications
Item # Size Case Qty.FR1414* 16 oz. 12
FR1416 1 gallon 2
FR1417 5 gallons 1
FR1418* 55 gallons 1
294
Titebond® Cold Press for High Pressure Laminate
• Specifically designed for use on applications with large surface areas
• Moderate speed of set• Economical alternative to contact cement• Suitable for large-scale flat laminating• Dries translucent• No harmful vapors
Item # Size Units/CaseFR4617* 5 gallons 1
Titebond® Melamine Glue
• Designed for bonding wood, particleboard, MDF and other porous substances to synthetic materials such as melamine, vinyl, and HPL as well as metals
• Thicker formulation - fewer runs and drips• Nonflammable - no offensive odor• Dries clear
Item # Size Units/CaseFR4014* 16 oz. 12
FR4016 1 gallon 2
FR4017 5 gallons 1
Titebond® Cold Press for Veneer
• Economical alternative to contact cement• Ideal for large-scale bonding of veneers
to flat surfaces• Specifically formulated for cold press
laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials
• Moderate speed of set• No harmful vapors• Formulated to minimize "bleed-
through"• Nonflammable
Item # Size Units/CaseFR5176 1 gallon 2
FR5177* 5 gallons 1
Titebond® Doweling Glue Low Viscosity
• Specifically designed for use with automatic doweling equipment
• Fast speed of set to reduce assembly time• Very low viscosity• Excellent flow characteristics• Dries translucent• Exceptional strength
Item # Size Units/CaseFR3817 5 gallons 1
Titebond® Original Wood Glue
• A standard for general woodworking applications
• Strong initial tack and fast speed of set to reduce clamp time
• Outstanding sandability• Unaffected by finishes• Excellent resistance to heat, solvents
and mildew• Ideal for both hardwoods and softwoods,
as well as most other porous materials
• Non-toxic, solvent free and cleans up with water
Item # Size Units/CaseFR5066 1 gallon 2
FR5067 5 gallons 1
Titebond® Extend Wood Glue
• A slower setting version of Original Wood Glue
• Offers superior performance in a broad range of applications, including edge and face gluing
• Ideal for complex operations such as curved railings and other assemblies that require more time to align
• Develops a bond stronger than wood itself and offers excellent sandability and is unaffected by finishes
• Compatible with all species of wood, as well as particleboard, MDF, plywood and other porous materials
Item # Size Units/CaseFR9106 1 gallon 2
FR9107* 5 gallons 1
295
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Titebond® White Glue
• Fast set - strong bond• Excellent heat-resistance• Safe - no solvent vapors• Water cleanup• Ideal for general woodworking
applications, as well as many other porous and semi-porous materials
Item # Size Units/CaseFR5026 1 gallon 2
FR5027 5 gallons 1
Super Titebond® Wood Glue
• High-quality, professional woodworking glue• Superior sandability• Excellent solvent resistance• Very high heat resistance• Easy cleanup with water
Item # Size Units/CaseFR5077 5 gallons 1
Molding & Trim Wood Glue
• Versatile - Bonds most porous and semi=porous materials• Extra-thick formula helps fill small cracks and gaps• No-runs, no-drips• Strong initial tack• Unaffected by finishes• Excellent sandability• Easy cleanup with water• Nonflammable - No offensive odor
Item # Size Units/CaseFR2404* 16 oz. 12
Titebond® Instant Bond Wood AdhesivesGel
• Fast set - Eliminates clamping or reduces clamp time• Bonds stronger than wood• Excellent heat and solvent-resistance• Unaffected by finishes• Versatile - Bonds wood, MDF, acrylic, granite,
natural rubber, PVC and more• 2 year shelf life• Triple distilled for purity & consistency• Impact-resistant• No-clog applicator for easy use
and waste reduction• Ideal for bonding miter joints on MDF and porous
woods• Excellent for filling large gaps• High viscosity allows time for positioning parts• MIL Spec (A46050C) Type II, Class 2
Item # Size Units/Case Type ViscosityFR6232* 4 oz. 10 Gel >50,000 cps
ActivatorFR6311 2 oz. 15 Activator 3 cps
Titebond® Instant Bond Wood AdhesivesThin
• Fast set - Eliminates clamping or reduces clamp time• Bonds stronger than wood• Excellent heat and solvent-resistance• Unaffected by finishes• Versatile - Bonds wood, MDF, acrylic,
granite, natural rubber, PVC and more• 2 year shelf life• Triple distilled for purity & consistency• Impact-resistant• No-clog applicator for easy use and
waste reduction• MIL Spec (A46050C) Type II, Class 1
Item # Size Units/Case Type ViscosityFR6202 4 oz. 10 Thin 5 cps
ActivatorFR6311 2 oz. 15 Activator 3 cps
296
Titebond® Instant Bond Wood AdhesivesThick
• Fast set - Eliminates clamping or reduces clamp time• Bonds stronger than wood• Excellent heat and solvent-resistance• Unaffected by finishes• Versatile - Bonds wood, MDF, acrylic, granite,
natural rubber, PVC and more• 2 year shelf life• Triple distilled for purity & consistency• Impact-resistant• No-clog applicator for easy use and
waste reduction• Ideal for bonding miter joints on MDF and
porous woods• Designed for finish & trim carpentry• High viscosity allows time for positioning parts• MIL Spec (A46050C) Type II, Class 3
Item # Size Units/Case Type ViscosityFR6222 4 oz. 10 Thick 2400 cps
ActivatorFR6311 2 oz. 15 Activator 3 cps
Titebond® Instant Bond Wood AdhesivesMedium
• Fast set - Eliminates clamping or reduces clamp time• Bonds stronger than wood• Excellent heat and solvent-resistance• Unaffected by finishes• Versatile - Bonds wood, MDF, acrylic, granite,
natural rubber, PVC and more• 2 year shelf life• Triple distilled for purity & consistency• Impact-resistant• No-clog applicator for easy use and
waste reduction• Adhesion of pen tubes to blanks in
pen making• MIL Spec (A46050C) Type II, Class 2
Item # Size Units/Case Type ViscosityFR6212* 4 oz. 10 Medium 120 cps
Activator FR6311 2 oz. 15 Activator 3 cps
Titebond® Painter’s Plus Caulk
• High-quality, versatile siliconized acrylic caulk designed for both interior and exterior applications
• Seals joints, repairs cracks and fills gaps• Paints & stains easily with one coat• Provides a flexible, watertight seal• Tools easily and cleans up with water• No residual odor• De-aired for a smoother bead
Item # Color Size Units/CaseFR8311* Almond 10.1 oz. 12
Solvent Free Construction AdhesiveGreenChoice Heavy Duty
• Environmentally safe - VOC-compliant• Bonds wood, paneling, plywood, metal, plastics
and more• Can be used on wet, frozen or treated lumber• Interior/Exterior - Waterproof• Offers freeze/thaw stability• Post-consumer recycled cartridge and carton
Item # Size Units/CaseFR7471* 10.5 oz. 12
Titebond® Polyurethane Liquid Glue
• A breakthrough in adhesive technology, this polyurethane glue combines a long 20 minute working time with a short 45 minute clamp time
• Ideal for metals, ceramics, most plastics, HPL, Corian®, stone and other porous/non-porous materials
• It is ready to use, offers excellent sandability and is unaffected by finishes
• As moisture causes the glue to foam, it has the ability to fill gaps and bridge irregularities in substrates; however, it will not expand or contract in the joint once fully cured
Item # Size Units/CaseFR7803* 8 oz. 12
297
Decorative
Knobs, Pulls &
Hinges
Surface M
aterialsBoards
& Panels
Adhesives, A
brasives &
LubricantsCatches &
LocksD
rawer Slides,
Systems &
Ergo
Fasteners &
Fittings
Hinges,
Mounting
Plates &
Bumpers
Kitchen &
Bath Accessories
LightingO
ther Functional H
ardware
Safety Products
Shelving, Closets &
Tracks
Tools &M
achinesW
ood Finishes
Wood
Products
Product offerings and descriptions are subject to change without notice. *Indicates lead-time item. Please contact Customer Care or your Strategic Account Manager for more information.
Top Grip® ST-102 Solvent Cleaner/ThinnerFlammable
• Thinner for TACC flammable solvent products• Cleaner for over-spray and spray equipment• Quick cut action• Made in USA by ITW TACC
Item # Size UN No.CCS125G 5 gallons UN1294
Top Grip® ST-172 Solvent Cleaner/ThinnerNonflammable
• Thinner for TACC nonflammable solvent products• Cleaner for over-spray and spray equipment• Quick cut action• Made in USA by ITW TACC
Item # Size UN No.CCSOLVENTM 5 gallons UN2810-2
Titebond® 100% Silicone Sealant
• Designed for both interior and exterior applications• 100% silicone formula• Excellent adhesion to most building materials, including
vinyl, aluminum, brick, glass and painted surfaces• Provides a watertight, mildew-resistant seal• Withstands extreme temperature changes• Maintains color with age - will not crack or become brittle• Safe for applications involving indirect food contact
Item # Color Size Units/CaseFR2611 Clear 10.1 oz. 12
FR2601* White 10.1 oz. 12
Z Solvent-Free Postformable AdhesiveNonflammable, Spray/Brush/Roller Grade
• Ideal for bonding HPL, decorative metals, phenolic-backed veneers, and many other materials
• Combines neoprene bond strength with regulatory compliance
• Zero VOCs, zero flammability, zero Methylene Chloride, zero HAPs, zero solvents
• Excellent green strength and ideal for postforming
• Stronger bond than most solvent- based adhesives
• Delivers 3-4 times the coverage of most solvent-based adhesives
• High solids, high rubber content helps Z dry faster than most water-based contact adhesives
• Easy to spray, brush, or roll on• GREENGUARD Indoor Air Quality Certified: Awarded GREEN-
GUARD’s more stringent Children & Schools Certification and exceeds LEED IEQ Credit 4.1 Low Emitting Materials: Adhesive and Sealants requirements
• Made in USA by ITW TACC• Product formulation as of September 2009 meets Ozone Transport
Commission (OTC) model rules for adhesives and sealants for the following states: CT, DE, DC, MD, ME, MA, NH, NJ, NY, PA, RI, VT, and VA.
Item # Size DescriptionCCZ10005C 5 gallons Clear
CCZ10005G 5 gallons Green
Plastic Glue Bottle with Cap
Item # DescriptionZU101WCAP 16 oz. bottle with cap
ZU0101 Replacement bottle only
ZU0102 Replacement cap with spout