transcript
“... let us run w ith endurance the race that is set before us ...”
H
ebrew s 12:1
“... let us run w ith endurance the race that is set before us ...”
H
ebrew s 12:1
eb re
w s
12 :1
“...let us run with endurance the race that is set before us...”
Hebrews 12:1
2089 Crooked Oak Road Rocky Mount, Virginia 24151 888-399-6074 Fax
540-484-1756 www.DRPperformance.com
Suspension Analysis & Set-Up Equipment Tools • Low Drag Hub
Components
Lightweight Axles • Brakes & Suspension “We make the components
that make a difference!”
Suspension Analysis Products
s is
“... let us run with endurance the race that is set before us ...”
Hebrews 12:1“... let us run with endurance the race that is set
before us ...” Hebrews 12:1
Order Toll Free: 888-399-6074 www.DRPperformance.com
Dynamic Scaling Systems
Specifications DSS-2 DSS-3 DSS-3VS Base Price $11,995. $15,995.
$17,995. Weight - All Systems Ship Truck Freight Portable Billet
Aluminum Scale Platforms; 12” Tall with HD Leveling Feet Yes Yes
Yes 4500lb Dual Load Cell Scales on Each Wheel No Yes Yes Removable
Scale Pads (Scales Not Included with System) Yes No No Quick Detach
Scale Roll Off Platforms (For Zeroing Scale Pads) Yes Yes Yes
Portable Beam Style Pull Down Structure (Adjusts to Any Wheelbase
& Tread width) Yes Yes Yes
High Compliance Pull Down Structure No No Yes Optional Surface
Plate Mount System Available (No Beams) Yes Yes Yes Heavy Duty
Electric Pull Down Cylinders (3 per System) Yes Yes Yes 3 Switch
Control Panel Yes Yes No 3 Switch Control Panel with Variable
Cylinder Speed Control No No Yes 3 Drawer Control Cart with Space
for Cylinder & Mount Storage Yes Yes Yes Pull Cylinder Load
Cells (Measures Force Required to Compress Chassis) No No Yes Slip
Plates on All Four Wheels to Eliminate Tire Bind Yes Yes Yes 5 Year
System Warranty/2 Year Electronics Warranty (Repair or Replacement)
Yes Yes Yes System will work with Perimeter or Straight Rail
Chassis (with Straight Rail Kit) Yes Yes Yes
Benefits of Dynamic Scaling Technology Measure Vehicle Kinematics
By motioning the chassis to achieve on track wheel travel, the user
is able to accurately simulate suspension states and measure
suspension characteristics such as Bump Steer, Ackerman, Rear
Steer, Camber, Caster, Wheel Base, Wheel Alignment and more. These
measurements can be taken throughout the travel range and graphed
using the DSS Analysis Software. Measurements are far more accurate
than traditional means (jacking one suspension side), due to the
suspension being motioned the way it moves on the track (chassis
compressing, wheel stays on track) and the suspension being under
full load. Measure Dynamic Wheel Loads Measuring corner weights and
percentages are a foundational basic for chassis set-up. With DSS
technology, you can now accurately measure corner weights and
percentages “on the track”, allowing the user to identify problems
and track vehicle balance throughout the suspension travel range.
With basic data acquisition, you can simulate an entire lap,
tracking all measurements simultaneously. Dynamic wheel load data
is especially important for accurately testing and setting bump
stops and coil bind. Graphing wheel loads allow the user to pick up
suspension bind such as sway bars, springs or ball joints. Test
Set-Up Ideas Once wheel load baselines are established for a given
track, the user can accurately predict suspension travel with any
set- up combination. This allows the user to eliminate wasted track
time due to the chassis bottoming out or suspension binding.
Suspension component changes can be tested in the shop, with
accurate outcome predictions. Examples: Make a spindle change and
see the camber change, caster change, bump change and wheel load
variation throughout the travel range. Make a spring change and see
what offsetting adjustments must also be made. Types of Standard
Tests: Wheel Load vs. Travel Using max travel data, the suspension
is compressed and wheel loads are measured at up to 25 points
through the travel range. Typi- cal measurements are taken every
1/4” of travel. Wheel Position vs. Travel This test may be run
simultaneously with the wheel load vs. travel test. It measures Toe
(Bump), Camber, Caster, Rear Steer, Contact Patch Alignment and
more. Corner (Lap) Simulation Using basic data acquisition, the
vehicle travel data is used to create a test simulating up to 25
points. This test may be for a small section of the track such as
corner entry or for a full lap. All measurements may be taken and
graphed showing the user exact car states throughout the corner.
Component Change This test is used to graph the difference(s) of
any suspension component change. A baseline test is run vs. travel
or vs. wheel load, then the suspension component is changed (this
could even be a hook-up point adjustment) and the test is run
again. Results are input into DSS Analysis software and tests are
graphed. Up to 20 tests can be plotted on same graph.
DSS-3VS Variable Speed Portable Dynamic Scaling System
“... let us run with endurance the race that is set before us ...”
Hebrews 12:1 “... let us run with endurance the race that is set
before us ...” Hebrews 12:1“... let us run with endurance the race
that is set before us ...” Hebrews 12:1
Satisfaction Guaranteed! Manufactured & Supported by DRP
Performance Products Rocky Mount, VA USA
Dynamic Scaling Systems
• Available with built in 4500# Dual Load Cells or for use with
Your Existing Scales • Motion Front & Rear with Simple Toggle
Switch Controls • 12” Tall Billet Aluminum Stands • Heavy Duty
6000# Leveling Feet • 12VDC Cylinders with Power Supply &
Control Panel • Innovative Removable Roll Offs for Zeroing Scales •
Use as an Elevated Set-Up Platform for Weekly Set- Ups • Full Slip
Plates Eliminate Wheel Bind • Test Set-Up Ideas before getting to
the Track • Test & Set Bump Stops & Coil Bind • Check for
Suspension Bind • Set-up & Use in 30 minutes! • Rate Sway Bars
& Springs • Works on Any Surface - Innovative Design does not
apply additional load to floor! • Adapts to any chassis style •
Includes DSS Analysis Software • Includes User Training (Travel not
Included) • Ships Truck Freight
Add our RS400PRO Kit and instantly measure: Bump Steer, Rear Steer,
Camber Change, Caster Change, Tread Width Change & More as you
motion your car.
Take your set-up equipment to the next level. DRP Dynamic Scaling
Systems (Pull Down Fixtures) allow the user to motion the racecar
under full load and measure wheel weights, cross %, camber, caster,
bump, rear steer and more, just like the car was on the track! We
have simplified this technology for almost any level
of race team. Simple toggle switch controls motion the vehicle with
our fully electric cylinders. Read wheel weights and percentages on
the scale display. Read wheel position using our laser based wheel
fixtures.
Completely portable, use in your shop or at the track!
Item Number Description Price
PD20200E DSS-3 DYNAMIC WHEEL LOAD FIXTURE WITH INTEGRATED DUAL LOAD
CELLS/ 4500LB CAPACITY SCALES (Per wheel); BILLET ALUMINUM SCALE
STANDS WITH LEVELING FEET; TRIPLE ELECTRIC PULL DOWN CYLINDERS;
ROLLING TOOL BOX FOR SYSTEM STORAGE WITH INTEGRATED CONTROL PANEL
AND SCALE DISPLAY System Includes: •(4) 12” Billet Aluminum Scale
Boxes with Integrated 4500# Capacity Dual Load Cells •(4) Teflon®
Slip Plates (One for each wheel) •(4) Detachable Roll Off Platforms
•(1) Tool Cart with Integrated Control Box, Power Supply and Scale
Display •(3) Electric Pull/Push Cylinders; 6” Stroke (•1) DSS
Analysis Software (1) Instruction Manual •(2) 2” x 3” Steel Pull
Down Beams •1 Day Training (Travel Not Included) •(3) Pull Cylinder
Beam Mounts •(3) Pull Cylinder Chassis Mounts; Adjustable
Height
$15,995.00
PD20200EVS DSS-3VS VARIABLE SPEED DYNAMIC WHEEL LOAD FIXTURE WITH
INTEGRATED DUAL LOAD CELLS/ 4500LB CAPACITY SCALES (Per wheel);
BILLET ALUMINUM SCALE STANDS WITH LEVELING FEET; VARIABLE SPEED
TRIPLE ELECTRIC PULL DOWN CYLINDERS; ROLLING TOOL BOX FOR SYSTEM
STORAGE WITH INTEGRATED CONTROL PANEL AND SCALE DISPLAY System
Includes: •(4) 12” Billet Aluminum Scale Boxes with Integrated
4500# Capacity Dual Load Cells •(4) Teflon® Slip Plates (One for
each wheel) •(4) Detachable Roll Off Platforms •(1) Tool Cart with
Integrated Variable Speed Control Panel, Power Supply and Scale
Display •(3) Electric Pull/Push Cylinders; 6” Stroke •(1) DSS
Analysis Software (1) Instruction Manual •(2) 2” x 3” Steel Pull
Down Beams with High Compliance Mounting System •1 Day Training
(Travel Not Included) •(3) Pull Cylinder Beam Mounts • (2)
Hydraulic Pull Cylinder Load Cells •(3) Pull Cylinder Chassis
Mounts; Adjustable Height
$17,995.00
$1,139.00
PD20400 DIRT LATE MODEL INSTALLATION KIT; INCLUDES (2) Cross Bars
with Brackets, Center Rail; Left Side Beam Cage Mounts; Left Side
Cylinder Lift Mounts; 10” Stroke Cylinders; Round Tube Cylinder
Chassis Clamps (Exchange)
$1450.00
20300 System with Customer Supplied Scales
Note Fixture Angle showing Caster Change at Travel
Car at Static Ride Height
Car at Corner Entry Height
DSS-3 Portable Dynamic Scaling System
“... let us run with endurance the race that is set before us ...”
Hebrews 12:1“... let us run with endurance the race that is set
before us ...” Hebrews 12:1
Order Toll Free: 888-399-6074 www.DRPperformance.com
Dynamic Scaling Systems
Designed for the do-it-yourself team, our DSS kits include all the
major components to build your own dynamic system. DSS Kits use
your wheel scales and your scale boxes, built with the included
plans. You supply the labor, steel and scales, we supply the
electric pull cylinders, frame mounts, beam mounts, beam rollers,
control panel, power supply, cables and construction plans.
Our DSS-2 Systems are identical to the DSS-3 other than integrated
load cells. With this system you use your existing scales (contact
us to determine if your scales have the necessary capacity) or add
a set of removable high
load scales. The DSS-2 billet scale boxes are ultra rigid and
incorporate removable roll off platforms and heavy duty leveling
feet. Set-up height is 12”. Control cart and beam system is
identical to DSS-3 systems.
Item Number Description Price
PD20300E DSS-2 DYNAMIC WHEEL LOAD FIXTURE WITHOUT LOAD CELLS;
BILLET ALUMINUM WITH LEVELING FEET; TRIPLE ELECTRIC PULL DOWN
CYLINDERS; ROLLING TOOL BOX FOR SYSTEM STORAGE WITH INTEGRATED
CONTROL PANEL AND SCALE DISPLAY STORAGE; CUSTOMER SUPPLIES SCALES;
SPECIFY 2.5” or 4” SCALE PADS System Includes: •(4) 12” Billet
Aluminum Scale Boxes with Place for Your Scales •(4) Teflon® Slip
Plates (One for each wheel) •(4) Detachable Roll Off Platforms •(1)
Tool Cart with Integrated Control Box & Power Supply •(3)
Electric Pull/Push Cylinders; 6” Stroke • DSS Analysis Software
•Instruction Manual •(2) 2” x 3” Steel Pull Down Beams •Complete
Training (Travel Not Included) •(3) Pull Cylinder Beam Mounts •(3)
Pull Cylinder Chassis Mounts; Adjustable Height
$11,995.00
PD20500 ASPHALT STRAIGHT RAIL INSTALLATION KIT FOR
PD20200E/PD20300E; INCLUDES: (2) CROSS BARS WITH BRACKETS &
CENTER RAIL $1,139.00
PD20400 DIRT LATE MODEL INSTALLATION KIT; INCLUDES (2) Cross Bars
with Brackets, Center Rail; Left Side Beam Cage Mounts; LS Cylinder
Lift Mounts; 10” Stroke Cylinders; Round Tube Cylinder Chassis
Clamps (Exchange)
$1450.00
Item Number Description Price
PD20200K DSS Components Kit for Building & Adapting Homemade
Pull Down Fixtures Kit Includes: •(4) Teflon® Slip Plates (One for
each wheel) •Control Panel & Power Supply •(3) Electric
Pull/Push Cylinders; 6” Stroke • DSS Analysis Software •Instruction
Manual •(3) Pull Cylinder Beam Mounts • (3) Aluminum Beam Rollers
& Shafts •(3) Pull Cylinder Chassis Mounts; Adjustable
Height
$5,995.00
DSS Scale Boxes available in Black or Blue Anodize or Polished
Aluminum.
DSS-2 Drop-In Scale Portable Dynamic Scaling System
DSS-KIT Do It Yourself Dynamic Scaling System Components Kit
“... let us run with endurance the race that is set before us ...”
Hebrews 12:1 “... let us run with endurance the race that is set
before us ...” Hebrews 12:1“... let us run with endurance the race
that is set before us ...” Hebrews 12:1
Satisfaction Guaranteed! Manufactured & Supported by DRP
Performance Products Rocky Mount, VA USA
Wheel Measurement Systems
Our most popular DSS System Add-on! Save time and increase accuracy
with precision DRP wheel fixtures and wheel measurement systems.
Measure individual wheel locations, referenced to the chassis, in
minutes without
tape measures or strings. Instantly measure rear end location,
front and rear toe, camber and more. Use for weekly static set-ups
and dynamically with our DSS-3 systems. Make a change and see it
immediately. Designed to work
with our DSS Analysis Software. Our customers love the time savings
from using this system!
The RS400PRO sets the Standard for all Motorsports Wheel Alignment
Systems. Quickly
and Accurately Measure:
PFour Wheel Toe PFour Wheel Camber PCaster PBump Steer PAckermann
PWheel Base
PRear End Location PAxle Tube Camber/Toe PRear Steer PHook-Up
Points PBody Location
PSquare Lower Control Arms
Item Number Description Price
90400P Real Square RS400PRO Four Wheel/Dual Laser Professional
Wheel Measurement System $3295.00
90200P Real Square RS200PRO Dual Wheel/Dual Laser Professional
Alignment System $2695.00
RS200PRO Includes only (2) Wheel Measurement Fixtures & (2)
Axle Alignment Fixtures Specify hub adapters and frame squares. See
page 10 for options.
98130A Centerline Laser Option $499.00
96375 Offset Late Model Installation Kit (Port City, Lefthander,
Hamke, Others) $89.00
96380 Asphalt Modified Installation Kit (Troyer, Spafco, Chassis
Dynamics, Others) $230.00
96390 Dirt Late Model Installation Kit (Barry Wright, Mastersbuilt,
Rocket, Others) $230.00
• Save Time & Improve Accuracy • 5 Year Warranty on
Fixtures
• 2 Year Warranty on Electronics • Single Person Operation
• Read All Four Wheel Locations Instantly • Works on any shop
floor, surface plate, set-up platform or
suspension rig. • Entire system mounts to the chassis
• Customise for almost any application
RS400PRO System Includes: 4 Adjustable Wheel Measurement
Fixtures
4 Hub or Spindle Mount Axle Alignment Fixtures
2 Magnetic or Clamp-on Frame Squares
1 Dual Laser Stand with Chassis Mount Kit
4 Adjustable Shaft Locks for Axle Alignment Fixtures
1 Caster/Camber Gauge Adapter
1 Tool Kit
RS400PRO Dynamic Wheel Measurement System
“... let us run with endurance the race that is set before us ...”
Hebrews 12:1“... let us run with endurance the race that is set
before us ...” Hebrews 12:1
Order Toll Free: 888-399-6074 www.DRPperformance.com
Software Make your measurements come to life with our DSS Analysis
Software. Developed for DRP by Stackpole Engineering, leaders in
suspension and tire simulation and analysis software. Input wheel
loads and wheel positions from our DRP wheel fixtures and let the
software do the rest. Graph all measurements verses position or
wheel travel. Overlay graphs to pinpoint differences. Software
automatically calculates load totals, percentages, toe change, rear
steer and contact patch alignment - completely through the travel
range! Use the software to create custom tests or simulation tests
using actual vehicle travel data. Zoom and manipulate graphs, print
reports and more. Very versatile and user friendly. Use
with DRP DSS or any other pull down systems. Download online via
www.DRPperformance.com or order a CD-ROM. Windows XP through
Windows 7.
Individual Wheel Load Graphs
Camber Graph
Caster Graph
• Choose From 2 different data input screens. • Prints 20+ page
reports for each test. • Overlay up to 20 tests per graph. • Edit
& Zoom Graphs. • Create Custom Tests. • Quickly Duplicate
Tests. • Add Notes for each position. • Up to 25 Positions per
Test. • Included with DRP DSS Systems • Use with Any Pull Down
System
Master Input Page
Graphical Input Page
Features: • Graph up to 25 vehicle positions at one time •
Calculates & Graphs Cross %, Front %, Rear %, Left %, Right %,
Bump Steer, Rear Steer & Contact Patch Alignment • Graphs
Individual Wheel Loads, Camber, Caster, System Load, Wheel Base
& Pinion Angle • Custom Fields for Sway Bar Rates, Chassis
Flex, Torque Arm Lift and more.
We’ve added a must have resource for all serious race teams. “An
Introduction to Race Car Engineering” BOOK 1, 3rd edition, by
Warren J. Rowley is 600+ pages of valuable information to help you
understand how suspensions work and how to tune them. All
suspension aspects are covered from Tires to Front Suspension, Rear
Suspension, Roll Centers,
CG, Shocks, Springs and more. Titled “An introduction”, this book
is very thorough, yet written in a way to make comprehension easy.
This is a modern book with tons of pictures, charts and drawings.
The table of contents alone
covers 15 pages! Includes a CD with Mitchell software’s WInGeo3
Demo version and Wan31/32 Software. This book is easily worth 3
times the asking price. For beginners to advanced. Satisfaction
guaranteed.
Item Number Description Price
SL15100 “An Introduction to Race Car Engineering” by Warren J.
Rowley $129.00
Item Number Description Price
SL70013 DRP DSS Analysis Software - CD-ROM $159.00
“An Introduction to Racecar Engineering” By Warren Rowley
DRP DSS Analysis Software
“... let us run with endurance the race that is set before us ...”
Hebrews 12:1 “... let us run with endurance the race that is set
before us ...” Hebrews 12:1“... let us run with endurance the race
that is set before us ...” Hebrews 12:1
Satisfaction Guaranteed! Manufactured & Supported by DRP
Performance Products Rocky Mount, VA USA
Data Acquisition
Accurate suspension analysis requires accurate wheel travel data.
Our Aim EVO-4 systems are custom set-up by DRP for your
application. These systems include everything you need to record
suspension travel and steering data for use with dynamic scaling
systems. Great for
testing, systems record data automatically with no track side
inputs required. Expandable to include almost any information you
can imagine! Simple instructions and in house tech support.
Affordable, accurate & easy to use.
You’ll be amazed at the functionality of this simple unit. Displays
lap times for the driver using GPS technology, so no beacons are
necessary. Once your finished the run, download the data into your
computer and view track maps showing each laps line along with
g
loads, segment times, acceleration speed, predictive lap times and
more. Includes lap timer & software. Mounting bracket sold
separately.
Item Number Description Price
DA21500 AIM EVO-4 Data Aq System; 4 Shock/1 Steering/RPM/G
Meter/Track Map; with Installation Kit, Instructions &
Case
$3495.00
DA21550 4 Channel Expansion for AIM Data Aq System with Cable
(Required for Additional Sensors) $299.00
DA21560 Data Hub for DA21500 System (use with USB Memory Key)
$60.00
DA21565 USB Memory Key for DA21500 System; Stores Data for Easy
Downloading $125.00
DA21570 Dash Display for DA21500 System; Displays Lap Times &
More $199.00
DA21575 Battery Pack for DA21500 System; Rechargeable; Eliminates
need for Power Wire $90.00
DA21600 Replacement Linear Potentiometer (For Shocks/Steering) with
Cables $319.00
DA21610 Potentiometer Mount; Screws on 1/2”-20 Shock Bolt; Hex
Steel $14.95
DA21611 Potentiometer Mount; Screws on 1/2”-13 Shock Bolt; Hex
Steel $14.95
DA21615 Potentiometer Extension Mount; 3” Billet Aluminum; Multi
Hole $15.95
DA21650 Throttle Position String Potentiometer with Cables
$299.00
DA21670 Brake Sensor Kit; 1 2000psi Sensor/Extension Cable/Whip
Line, Bleeder and Fittings (One wheel kit) $219.00
DA21690 Tire Temp Sensor Kit; 8 IR Temp Sensors/Cables, 4 Mounting
Brackets (will hold 3 sensors each), 2 Channel Expanders
$3560.00
DA40000 Coil-Over Spring Load Cell; Hydraulic with Pressure Sensor
Call
DA40010 Coil Spring Load Cell; Hydraulic with Pressure Sensor
Call
DA40020 Panhard/Trailing Arm Load Cell; Hydraulic with Pressure
Sensor; 3/4”-16 Call
DA40030 Sway Bar Load Cell; Hydraulic with Pressure Sensor; 1/2”-20
Call
Item Number Description Price
DA22000 Aim SOLO GPS Lap Timer with Track Mapping $399.95
DA22100 SOLO Chassis Mount; 1.75” Round Tube; Clamp-On; Includes
Storage Case $69.95
• 5 Channels - Expandable up to 25+ • Simple Wiring System •
Lightweight and Compact • 1.75” Clamp-on Chassis Mount • 2 Speed
Channels • GPS Based - No Beacons • 9-15v Power DA21500 Kit
Records: • RPM • G-Loads • Track Map (Drivers Line) • All Four
Shock Travels with Velocity • Steering Position • Lap Times wit
Segment Times • Add Throttle Position, Brake Pressures, Tire Temps,
Oil Temp, Oil Pressure, Water Temp & More!
• No Wiring - Internal Battery & GPS Antennae • Rechargeable
Battery or Hard Wire • Compact • 1.75” Clamp-on Chassis Mount
Available • Magnetic Attachment for Quick Removal • GPS Based - No
Beacons • Easy to Use
DA22000 SOLO Features: • Displays Lap Times • Predictive Lap Times
• Best Time • Records Track Map • G-Loads • Lap Times wit Segment
Times • Acceleration & Braking Speeds & More!
DRP Data Acquisition Kits
Aim SOLO In Car Lap Timer with Track Map
“... let us run w ith endurance the race that is set before us ...”
H
ebrew s 12:1
eb re
w s
12 :1
Jigs & Fixtures Our new rear end checking fixture measures
individual wheel toe and camber quick and easy. No more rotating
the rear and trying to keep up with the dial indicator. This
fixture is machined from heavy duty billet aluminum plate, with
integrated v-blocks to accurately
center the rear and caps to allow the user to set the desired
pinion angle and hold the rear in position. Once in place, take the
included digital caliper, and place it on the fixture pegs located
below the rear cover and on the hub plate. Press zero. Move the
caliper to the
front pegs and read the toe for that axle tube to .001”. Repeat
procedure for the other axle tube. For camber, simply use a digital
caliper on the wheel plate or rotate the rear 90 degrees and repeat
procedure. Anyone can use this fixture accurately and quickly.
Straighten rear by jacking or heating/cooling, your choice.
Included struts allow precise straightening when heat cool method
is used. Wide Five
hub plates are standard, 1” thick 5x5 plate adapters Works on any
3” OD axle tube rear.
Item Number Description Price
007 92010 5x5 Adapter Plates (Set of 2) $240.00
Top teams and chassis builders use our adjustable spindle fixture
to check, repair and build new spindles. Teams utilize this fixture
to check purchased spindles and develop new combinations “in
house”. Chassis builders utilize the fixture for custom spindles.
Build and check both fabricated and forged spindles. This fixture
is heavy duty, yet fully adjustable. Fixtures weighs over 60 lbs.
Adjustable height, spindle pin drop, pin angle, steering arm
length, steering arm angle & spindle pin offset. Easily jigs
existing spindles, allowing for repairs and changes.
Available
for Standard Wide Five, 2 7/8” Wide Five, 5x5 GN, 2 1/2” 5x5 &
2” Bearing 5x5 style spindles. Custom configurations
available.
Item Number Description Price
007 80200 Spindle Jig Assembly; Wide Five & 2” 5x5 (Late Model
Dirt & Asphalt) $1495.00
007 80280 Spindle Pin Reducer for 80200 Spindle Jig (Adapts to
1.75” Spindle Pins) $28.80
Fixtures Available for 2.5” Spindle Pins, 2 7/8” Spindle Pins &
Custom Applications
Fixture for Measuring & Building Spindles:
• Adj. Spindle Height 6”-12” • Ball Joint Alignment • King Pin
Angle 0-15deg • Steering Arm Location • Spindle Pin Drop • Spindle
Pin Offset • Spindle Pin Lead
888-399-6074 www.DRPperformance.com
Spindle Fixtures