miniature shafts,metal dowels,(4x4, 4x6,4.5x4.5,4.5x6 aluminium oxid...owels pins 4x21.8, 4x23.8, 4x25.8, 4x27.8, 4x29.8, 4x34.8, 4x39.8).

miniature shafts,metal dowels,(4x4, 4x6,4.5x4.5,4.5x6 aluminium oxide rollers 4x8, 4x11.8, 4x13.8, loose needles,cylindrical rollers,4x15.8, 4x17.8, 4x19.8,dowels pins 4x21.8, 4x23.8, 4x25.8, 4x27.8, 4x29.8, 4x34.8, 4x39.8).

Font: Normal mid large Print Close Bookmark

miniature shafts, pins dowels(4x4, 4x6,zirconia rollers 4x8, 4x11.8, 4x13.8, loose needles,cylindrical rollers,4x15.8, 4x17.8, 4x19.8,dowels pins 4x21.8, 4x23.8, 4x25.8, 4x27.8, 4x29.8, 4x34.8, 4x39.8).

locating bearings require large axial

displacement, and it is not technically or

economically feasible to harden and grind the

shaft surface, needle roller outer and cage

assemblies can be combined with separable

wider inner rings.

needle roller bearings are available in several designs including variants without inner rings.

the most important design variations are shown on the opposite page.

we supply high quality rollers with hardened

steel,all of the rollers had hardened. usually,

the material of needle rollers and cylindrical

rollers, is chrome steel 52100(HRC60-65) or

stainless steel 420 (HRC53-56), the material of balls, is stainless steel

440C(HRC55-58).

in both inch and metric sizes. we also custom manufacture special dowel pins to your

specification, and will be pleased to offer our quotation upon receipt of your detailed

requirements.

pillow block bearings incorporate a bearing

into a specific type of housing and are

generally sold as a single unit. The outer ring

is intended to be stationary, with only the

inner ring actually moving. This type of bearing is well balanced and

typically delivers long service cycles without a great deal of user maintenance

we also manufactures precision cylindrical rollers and needle rollers according to customer's

drawing.

● home

● products

● contact

● equipments

● steel balls

● capillary tubes

● cylindrical roller

● needle rollers

● ceramic rollers

● Si3N4 rollers

● ZrO2 rollers

● sizes or stocks

● D0.5mm series

● D1.0 series

● D1.5 series

● D2.0 series

● D2.5 series

● D3.0 series

● D3.5 series

● D4.0 series

● D5.0 series

● D6.0 series

● D7.0 series

● D8.0 series

● D9.0 series

● D10.0-D60.0 series

● 2x2, 3x3,

http://www.bearing-needle.com/4x6+4.5x4.5+be...x23.8+4x25.8+4x27.8+4x29.8+4x34.8+4x39.8.htm（第 1／2 页）[2015-12-23 1:39:44]

miniature shafts,metal dowels,(4x4, 4x6,4.5x4.5,4.5x6 aluminium oxid...owels pins 4x21.8, 4x23.8, 4x25.8, 4x27.8, 4x29.8, 4x34.8, 4x39.8).

stock of diameter 4(mm) series: dowels, rollers and pins,cylindrical rollers and needle rollers

loose needle rollers, precision dowels and pins,cylindrical rollersD*L Qty(pcs) D*L Qty(pcs) D*L Qty(pcs) D*L Qty(pcs)

4*1.45 5000 4*1.55 1800 4*2.7 2100 4*3.85 1300

4*3.9 3200 4*3.93 2410 4*3.95 5000 4*4 9900

4*4.5 306400 4*4.5SS 92700 4*5 55220 4*6 219500

4*7 8800 4*7.3 78500 4*7.5 147400 4*8 24730

4*9 16800 4*10 95600 4*10.8 8800 4*11 66000

4*11.5 20500 4*12 7300 4*12.4 6600 4*12.5 3800

4*13 58220 4*14 37580 4*15 1750 4*15.2 18700

4*15.5 6200 4*15.8 2500 4*16 109870 4*16.2 12630

4*16.7 1300 4*17 2000 4*17.2 41600 4*18 37800

4*18.5 300 4*19 88900 4*19.3 600 4*19.5 1200

4*20 79800 4*21 55000 4*22 4000 4*22.1 1200

4*23 79000 4*24 88500 4*25 3400 4*25.8 2500

4*26 26610 4*27 7190 4*28 2400 4*28.5 2500

4*28.7 3000 4*28.98 1200 4*29 65210 4*30 16200

4*30.8 2560 4*31 5540 4*32 6500 4*33 5540

4*34 1660 4*34.8 9680 4*35 5540 4*36 5650

4*37 7800 4*38 87440 4*39 252510 4*39.8 9290

4*40 21800 4*41 7800 4*41 25110 4*42 4400

4*43 4500 4*44 66550 4*45 5400 4*46 6600

4*47 8800 4*48 8710 4*49 1200 4*50 2200

4*51 6500 4*52 5500 4*53 3230 4*54 4500

4*54.8 16800 4*55 2200 4*56 1100 4*57 5500

4*58 2200 4*59 5520 4*60 2200 4*65 5570

4*78.6 1700 4.05*16* 12000 4.05*20* 3900 4.1*18* 12000

4.1*20* 9500 4.1*28.7* 1400 415*16* 17500 4.15*18* 20200

4.15*20* 11500 4.2*16* 26500 4.2*18* 16500 4.25*16* 16500

4.45*16* 7400 4.5*4.5 12100 4.5*6 2400 4.5*8 27000

4.5*10 93200 4.5*12 5500 4.5*13 15800 4.5*13.8 6000

4.5*15 4810000 4.5*16 10400 4.5*18 11300 4.5*24 24700

4.5*25 4000 4.5*37 6900 4.5*38 10600 4.5*50 1020

4.55*16 11000 4.55*18 10500 4.55*20 5000 4.6*16 10000

4.6*18 4000 4.6*25.8* 500 4.65*16 26900 4.65*18 10400

4.65*20 3000 4.7*16 14800 4.7*18 8600 4.75*16 2800

4.75*20 9800 4.75*22 9100 4.75*50.9 400 4.754*30.1 3050

4.76*12.5* 39500 4.76*28* 8800 4.7625*20* 7800 4.7625*23.8* 25300

4.7625*26* 880 4.7623*6 64700 4.8*20 13700 4.8*21.8 12000

4.8*23.8 43500 4.8*27.8 10120 4.82.12 3200 4.9*13* 12400

4.9*16* 33200 4.93*7.9* 10400 4.95*13 11500 4.95*16 700

4.95*20 4500 4.98*27.8 10000 4.995*39.6 900

needles and rollers,miniature pins,precision needles,miniature shafts,cylindrical rollers,dowels and pins,

4x4, 5x5, 6x6, 7x7, 8x8, 9x9

● 10x10, 11x11, 11x15, 12x14

● 13x13, 14x14, 15x15, 20x20

● 30x30, 40x40, 50x50, 60x60

needle rollers tapered rollers cylindrical rollers dowel pins grooved pins crowned rollers needle roller bearing copyright©2015 YDTech®

http://www.bearing-needle.com/4x6+4.5x4.5+be...x23.8+4x25.8+4x27.8+4x29.8+4x34.8+4x39.8.htm（第 2／2 页）[2015-12-23 1:39:44]