5 Common Data Center Specifications Problems (SlideShare)

transcript

SPONSORED BY LEAD GENERATION BEST PRACTICESFOR COLOCATION DATA CENTERS

5 Common Data Center Specifications Problems

Whether it’s the business world or the general public, data centers are now a vital part of our daily lives. With the growth of the Internet of Things (IoT), data centers will only increase in importance and rapidly

multiply around the world.

Sponsored by http://www.DataCenterLeadGen.com

However, building and managing opens the door to many data center specifications issues. Not only is it an expensive project to undertake, it’s also a massive challenge to operate

without any unforeseeable disruptions.

Every data center is different and has its own unique problems. What works well at one location may not suit another. As

a result, data center engineers constantly need to adapt and manage available resources to resolve

specification issues.Sponsored by http://www.DataCenterLeadGen.com

However, there are some problems that are common across the board. Although there is no one size fits all solution, we can gain a lot of insight

from common data center specifications problems.

1. UPS Battery Failure

The most common cause of unplanned outages is a result of bad planning and UPS battery failure. This coupled with UPS

exceeding capacity can result in huge downtime expenses.

Avoid it by planning and investing intelligently in the right UPS that can

handle the expected load. Further, it is imperative that batteries are routinely

checked and maintained.

2. Inadequate Infrastructure Planning

When you start consolidating old and new servers, it is important to note that new servers (like blade

servers) use a lot more power than their older counterparts.

Newer servers can consume almost five times more power than old

servers. This, in turn, increases your cooling needs within the facility, so it is also necessary to take it into

consideration when adding new equipment.

3. Incursion of Water in the Facility

It might seem obvious that water shouldn’t come into contact with electronic

equipment like servers, but it does happen and causes major disruptions.

The types of water related incidents are as follows:•Leaky valves•Soda and coffee brought into the data center by technicians

The solution to this problem is simple, monitor the valves and ensure that all drinks are checked in at the door before entering a facility.

4. Lack of Real-Time Reporting

When it comes to data center specifications, establishing a real-

time reporting system is something that colocation operators often

overlook.

Manual readings that were taken weeks ago can’t help you make important

decisions for something as complex as a colocation center. The only way to

optimize capacity and power loads is to have reliable up-to-the-minute readings.

5. Insufficient Planning to Handle Demand

When it comes to data centers, depending on the types of clients that

are served, there will be peaks and valleys in demand. If you’re catering to the financial sector, the demand will be high during business hours and next to

nothing overnight.Sponsored by http://www.DataCenterLeadGen.com

The holiday season will be another time when there will be a significant rise in

demand when it comes to retail clients.As a result, data center operators need to plan and be ready for fluctuations in

demand.

Have you experienced any data center specifications

problems? How did you resolve them?

Share your thoughts in the Comments box below.

5 Common Data Center Specifications Problems (SlideShare)

Technology