Post on 26-Sep-2020
transcript
Installation Instructions
PowerFlex 520-Series Power Module Front Cover InstallationCatalog Numbers: 25-PMFC-FB, 25-PMFC-FC, 25-PMFC-FD, 25-PMFC-FE
2DC+ DC–
0V
0V1 L1 L2 L3
O
I
Wait three minutes after shutdown for capacitors to discharge to safe voltage levels.
Frame B25-PMFC-FB
Frame C25-PMFC-FC
Frame D25-PMFC-FD
Frame E25-PMFC-FE
Publication 520-IN010A-EN-P - September 2013
PowerFlex 520-Series Power Module Front Cover Installation
a
b
Note: Frame A drives do not require a power module front cover.
3 Mount the Power Module Front Cover How to Remove the Power Module Front Cover
For Frame B...E
Publication 520-IN010A-EN-P - September 2013Copyright © 2013 Rockwell Automation, Inc. All rights reserved.
Allen-Bradley, Rockwell Software, Rockwell Automation, PowerFlex, and TechConnect are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: support@drives.ra.rockwell.comOnline: http:// www.ab.com/support/abdrives