Post on 28-Jan-2020
transcript
6020 Series TractorsATTACHMENTS
Issue 02/2006 Region I and II
John Deere Werke Mannheim
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-1
ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.
Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.
1 Drive System
1.1 FRONT PTOModern tractor application requires more and morefront driven implements. To satisfy these demandsJohn Deere provides front PTOs for 6020 Seriestractors for field installation. By following the modularconcept, these field kits furnish John Deere tractorsperfectly for front driven applications like mowing,snow blowing or shredding. The housing designmatches exactly to the front support and enables acomfortable field installation. When not in use, thedriveline can be mechanically disconnected by aseparate lever to save fuel and prevent power loss. Theaccustomed John Deere standards in terms of quality,reliability and service are provided by followingcharacteristics:
• A more horizontal shaft alignment optimizes thepower train from engine to PTO.
• The heavy duty transmission is able to transmit100% of the engine power.
• Oil cooled multi disc clutch provides a smoothengagement.
• A separate oil cooler provides a reliableapplication under all climatic conditions.
• Independent hydraulic system for lubrication andclutch engagement contributes to a high reliability.
The rated PTO speed of 1000 rpm will be achieved at95 % of rated engine speed. Thus, a synchronizedoperation with rear PTO driven implements is possible.
Front PTO - 4 cyl. tractors (21 splines)
Models: cab only: 6120 - 6420SNote:with air-conditioning; up to tractor serial
number 356845
Models: cab only: 6120 - 6420S, 6020SE - 6420SENote: with air-conditioning; from tractor serial
number 356846Note: for SE tractors order in addition:
Code Bundle DescriptionAL155846 Front PTO, 21 splines
Code Bundle DescriptionAL160639 Front PTO, 21 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
6020 Series Tractors-2 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6120 - 6420SNote: without air-conditioning, with TLS; up to
tractor serial number 35684
Models: cab only: 6120 - 6420SNote: without air-conditioning, with TLS; from
tractor serial number 356846
Models: cab only: 6120 - 6420SNote: without air-conditioning, without TLS; up to
tractor serial number 356845
Models: 6120 - 6420S, 6020SE - 6420SENote: without air-conditioning, without TLS; from
tractor serial number 356846Note: for SE tractors and tractors without cab order in
addition:
Note: for tractors without cab order in addition:
Front PTO - 4 cyl. tractors (6 splines)
Models: cab only: 6120 - 6420SNote: with air-conditioning; up to tractor serial
number 356845
Models: cab only: 6120 - 6420S, 6020SE - 6420SENote: with air-conditioning; from tractor serial
number 356846Note: for SE tractors order in addition:
Models: cab only: 6120 - 6420SNote: without air-conditioning, with TLS; up to
tractor serial number 356845
Models: cab only: 6120 - 6420SNote: without air-conditioning, with TLS; from
tractor serial number 356846
Models: cab only: 6120 - 6420SNote: without air-conditioning, without TLS; up to
tractor serial number 356845
Code Bundle DescriptionAL155851 Front PTO, 21 splines
Code Bundle DescriptionAL160643 Front PTO, 21 splines
Code Bundle DescriptionAL155848 Front PTO, 21 splines
Code Bundle DescriptionAL160641 Front PTO, 21 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Bundle Description Remark QTYAL161380 Adapter wiring harness 1R44302 Attachment band 3
Code Bundle DescriptionAL155847 Front PTO, 6 splines
Code Bundle DescriptionAL160640 Front PTO, 6 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Code Bundle DescriptionAL155852 Front PTO, 6 splines
Code Bundle DescriptionAL160644 Front PTO, 6 splines
Code Bundle DescriptionAL155850 Front PTO, 6 splines
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-3
Models: 6120 - 6420S, 6020SE - 6420SENote: without air-conditioning, without TLS; from
tractor serial number 356846Note: for SE tractors and tractors without cab order in
addition:
Note: for tractors without cab order in addition:
Front PTO - 6 cyl. tractors (21 splines)
Models: cab only: 6520, 6620, 6520SE, 6620SENote: with air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damperNote: for SE tractors order in addition:
Models: 6520, 6620, 6520SE, 6620SENote: without air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damperNote: for SE tractors and tractors without cab order in
addition:
Note: for tractors without cab order in addition:
Models: cab only: 6820 - 6920SNote: with air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damper
Models: cab only: 6820 - 6920SNote: without air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damper
Code Bundle DescriptionAL160642 Front PTO, 6 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Bundle Description Remark QTYAL161380 Adapter wiring harness 1R44302 Attachment band 3
Code Bundle DescriptionAL160648 Front PTO, 21 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Code Bundle DescriptionAL160650 Front PTO, 21 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Bundle Description Remark QTYAL161380 Adapter wiring harness 1R44302 Attachment band 3
Code Bundle DescriptionAL160652 Front PTO, 21 splines
Code Bundle DescriptionAL160654 Front PTO, 21 splines
6020 Series Tractors-4 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Front PTO - 6 cyl. tractors (6 splines)
Models: cab only: 6520, 6620, 6520SE, 6620SENote: with air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damperNote: for SE tractors order in addition:
Models: 6520, 6620, 6520SE, 6620SENote: without air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damperNote: for SE tractors and tractors without cab order in
addition:
Note: for tractors without cab order in addition:
Models: cab only: 6820 - 6920SNote: with air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damper
Models: cab only: 6820 - 6920SNote: without air conditioningNote: order in addition for tractors up to serial
no. 352949, 1 x RE509264 torsion damper
Code Bundle DescriptionAL160649 Front PTO, 6 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Code Bundle DescriptionAL160651 Front PTO, 6 splines
Bundle Description Remark QTYAL40936 Indicator light 1
AL161421 Adapter wiring harness indicator 1
Bundle Description Remark QTYAL161380 Adapter wiring harness 1R44302 Attachment band 3
Code Bundle DescriptionAL160653 Front PTO, 6 splines
Code Bundle DescriptionAL160655 Front PTO, 6 splines
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-5
1.2 CREEPER KITS
Models: without cab: 6020 - 6620, low profile open station: 6020 - 6420 6020SE - 6620SE
Note:Depending on the options of the tractor, additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Models: cab only: 6320 - 6420SNote:up to tractor serial number 376372Note:Depending on the options of the tractor,
additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Models: cab only: 6320 - 6420SNote: from tractor serial number 376373Note:Depending on the options of the tractor,
additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Code Bundle Description
AL162433 Creeper kit, PowrQuad transmission,4 ranges
Bundle Description Remark QTY
AL114386 Push-pull cable, 1050 mm length for 4 cyl. tractors 1
AL151613 Clutch cable with absorber for 4 cyl. tractors 1
AL114387 Push-pull cable,1160 mm length for 6 cyl. tractors 1
AL151610 Clutch cable with absorber for 6 cyl. tractors 1
AL155072 Oil line 1AL77610 U-Driveshaft 1R119441 Arm, clutch outer 1R150858 Bracket, clutch 1AL70818 Wiring harness 1
AL112697 Loadcenter bracket for open operator’s station tractors 1
AL117414 U-joint, drive shaft for 4 cyl. tractors 1AL117418 U-joint, drive shaft for 6 cyl. tractors 1
Code Bundle Description
AL157233 Creeper kit, PowrQuad transmission, 6 ranges
Bundle Description Remark QTY
AL114386 Push-pull cable, 1050 mm length not for HCS 1
AL114387 Push-pull cable, 1160 mm length with HCS 1
Code Bundle Description
AL162172Creeper kit, PowrQuad Plus or AutoQuad transmission, 6 ranges
Bundle Description Remark QTY
AL114386 Push-pull cable, 1050 mm length not for HCS 1
AL114387 Push-pull cable, 1160 mm length with HCS 1
6020 Series Tractors-6 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6120 - 6620Note:up to tractor serial number 376372Note:Depending on the options of the tractor,
additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Models: cab only: 6120 - 6620Note: from tractor serial number 376373Note:Depending on the options of the tractor,
additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Models: without cab: 6020 - 6620, low profile open station: 6020 - 6420, 6020SE - 6620SE
Note: Depending on the options of the tractor, additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Code Bundle Description
AL157055 Creeper kit, PowrQuad Plus or AutoQuad transmission, 6 ranges
Bundle Description Remark QTY
AL114386 Push-pull cable, 1050 mm length 6120 - 6420S 1
AL114387 Push-pull cable, 1160 mm length
6120 - 6420S with HCS,6520, 6620 1
Code Bundle Description
AL162171 Creeper kit, PowrQuad Plus or AutoQuad transmission, 6 ranges
Bundle Description Remark QTYAL160792 Housing 1
AL114386 Push-pull cable, 1050 mm length 6120 - 6420S 1
AL114387 Push-pull cable, 1160 mm length
6120 - 6420S with HCS,6520, 6620 1
Code Bundle Description
AL162432 Creeper kit, SyncroPlus transmission, 4 ranges
Bundle Description Remark QTY
AL114386 Push-pull cable, 1050 mm length for 4 cyl. tractors 1
AL151610 Clutch cable with absorber for 4 cyl. tractors 1
AL114387 Push-pull cable, 1160 mm length for 6 cyl. tractors 1
AL151614 Clutch cable with absorber for 6 cyl. tractors 1
AL112697 Loadcenter bracket for open operator’s station tractors 1
AL117412 U-joint, drive shaft for 4 cyl. tractors 1AL117420 U-joint, drive shaft for 6 cyl. tractors 1AL118044 Hose clamp 5AL154623 Formed hose, assy. 1AL154624 Formed hose, assy. 1AL71351 Parts kit for creeper 1L112093 Oil line 1L112094 Oil line 1L112095 Formed hose 1L112292 Angle 1L41980 Clamp 214M7272 Hex nut, M6 214M7274 Hex nut, M10 1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-7
Models: without cab: 6020 - 6620, 6020SE - 6620SE (not for low profile)
Note:Depending on the options of the tractor, additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Models: cab only: 6820Note:Depending on the options of the tractor,
additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
Models: cab only: 6920, 6920SNote:Depending on the options of the tractor,
additional spare parts may be required, e.g. panel. Please use the corresponding spare parts catalog.
1.3 COVERSThese covers are recommended when driving underadverse working conditions like scrub and woodland.
Models: cab only: 6120 - 6920S
Code Bundle Description
AL162434 Creeper kit, SyncroPlus transmission with PowrReverser, 4 ranges
Bundle Description Remark QTY
AL114386 Push-Pull cable, 1050 mm length for 4 cyl. tractors 1
AL151610 Clutch cable with absorber for 4 cyl. tractors 1
AL114387 Push-Pull cable, 1160 mm length for 6 cyl. tractors 1
AL151614 Clutch cable with absorber for 6 cyl. tractors 1
AL112697 Loadcenter bracket for open operator’s station tractors 1
AL117414 U-joint, drive shaft for 4 cyl. tractors 1AL117418 U-joint, drive shaft for 6 cyl. tractors 1AL117964 Fitting for 4 cyl. tractors 1
AL111538Wiring harness, transmission, with option box
for SE models 1
AL114289 Oil line assembly for tractors with front drive 1
AL79704 Hydraulic hose for tractors with front PTO 1
Code Bundle Description
AL157237 Creeper kit, PowrQuad Plus or AutoQuad transmission
Bundle Description Remark QTYAL155419 Heater hose 1L154239 Formed hose 1L154240 Oil cooler hose 1L158529 Y-connector 1AL155074 Oil line assy. 1
AL156590 Bracket with suspended front axle 1
L154166 Shield flywheel, side left TLS
with suspended front axle 1
RE201075 Shaft, transmission output with bushing 1
14M7273 Nut (M8) 119M7162 Cap screw 1
Code Bundle Description
AL157238 Creeper kit, PowrQuad Plus or AutoQuad transmission
Bundle Description Remark QTYAL155419 Heater hose 1L154239 Hose, formed 1L154240 Oil cooler hose 1L158529 Y-connector 1AL155076 Oil line assy. 1
AL156590 Bracket with suspended front axle 1
L154166 Shield flywheel, side left TLS
with suspended front axle 1
RE201075 Shaft, transmission output with bushing 1
14M7273 Nut (M8) 119M7162 Cap screw 1
Code Bundle Description
AL163214 Covers for electro-magnetic shift valves
6020 Series Tractors-8 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
2 HYDRAULICS
2.1 MECHANICALLY-ACTUATED SELECTIVE CONTROL VALVES -
M-SCV
The M-SCVs provide a full range of features whichgives the flexibility to operate all hydraulic equipmenton the farm. The M-SCVs are located at the rear of thetractor, at either side of the hitch valve. ISO scs aremounted to each M-SCV.Three different M-SCV versions are available: 100 resp. 101 Series, 200 resp. 201 Series or 300 resp.301 Series.100, 200 and 300 Series M-SCVs can only be usedwith PFC hydraulic system with axial piston pump.101, 201 and 301 Series M-SCVs can only be usedwith PC or HydraVantage hydraulic systems withgear pump.
300 and 301 Series M-SCVs can basically be used inall positions, but if possible they should be installed onthe left hand side (M-SCV at pos. 1 or 2). Wheninstalling them on the right hand side (M-SCV at pos.3 or 4), an additional parts kit is necessary.M-SCV Identification
• 100 or 101 Series (Standard): mechanicallyactuated, with fixed cap
• 200 or 201 Series (DeLuxe): mechanicallyactuated, with three operating positions
• 300 or 301 Series (Super DeLuxe): mechanicallyactuated, with three operating positions
100 Series M-SCV
This valve features: • A 4 position lever control that is detented as
standard• Flow of up to 60 l/min is available through the
valve• Removable detent collar• 4-way operation• Automatic detent release (if detent is fitted) when
the engine is switched off.
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-9
The M-SCV field kit contains as well thecorresponding quick couplers and dust protection. Thebelow listed control and mounting parts have to beordered separately according to the mounting positionof the M-SCV.
Models: 6020 - 6920S
Control and mounting partsFor M-SCV installation on Position I
For M-SCV installation on Position II
For M-SCV installation on Position III
For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)
101 Series M-SCVThis valve features: see 100 Serie M-SCV
The M-SCV field kit contains as well thecorresponding quick couplers and dust protection. Thebelow listed control and mounting parts have to beordered separately according to the mounting positionof the M-SCV.
Models: 6020 - 6620 (without cab), 6020SE - 6620SE
Control and mounting partsFor M-SCV installation on Position I
For M-SCV installation on Position II
For M-SCV installation on Position III
For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)
Code Bundle Description
AL169787M-SCV Series 100 with 2 ISO-standard quick couplers and dust protection housing
Bundle Description Remark QTY
AL169859 Control and mounting parts
for tractors up to serial number 375300
1
AL169860 Control and mounting parts
for tractors from serial number 375301
1
Bundle Description Remark QTY
AL169859 Control and mounting parts 1
Bundle Description Remark QTY
AL169861 Control and mounting parts and spacer housing 1
Bundle Description Remark QTY
AL169862Single lever control,2 functions and mounting parts
controls M-SCV on Position III and IV
1
AL153498Shifter rod for single lever control, console-integrated
for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission
1
Code Bundle Description
AL169788M-SCV Series 101 with 2 ISO-standard quick couplers and dust protection housing
Bundle Description Remark QTY
AL169859 Control and mounting parts
for tractors up to serial number 375300
1
AL169860 Control and mounting parts
for tractors from serial number 375301
1
Bundle Description Remark QTY
AL169859 Control and mounting parts 1
Bundle Description Remark QTY
AL169861 Control and mounting parts and spacer housing 1
Bundle Description Remark QTY
AL169862Single lever control,2 functions and mounting parts
controls M-SCV on Position III and IV
1
AL153498Shifter rod for single lever control, console-integrated
for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission
1
6020 Series Tractors-10 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
200 Series M-SCV
In addition to the features of 100 Series valves, 200Series M-SCV features:
• A variable flow control, from zero to maximumflow, and 2-way selectable detents
• 96 l/min. maximum flow (not with 60 l/min.pump)
• Selectable detents allow the switching between’No detent’, ideal for loader operation, and’Mechanical detent’, for continuous hydraulicmotor operation
• Flow infinitely adjustable from 0 to 96 l/min.• The control dial is located on the M-SCV and may
be reached from the operator’s seat• Neutral start protection releases lever to neutral
when the engine is switched off• A load check valve on the raise/extend port
prevents loader and implement linkage creep
The M-SCV field kit contains as well thecorresponding quick couplers and dust protection. Thebelow listed control and mounting parts have to beordered separately according to the mounting positionof the M-SCV.
Models: 6020 - 6920S
Control and mounting partsFor M-SCV installation on Position I
For M-SCV installation on Position II
For M-SCV installation on Position III
For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)
201 Series M-SCVThis valve features: see 200 Serie M-SCV
The M-SCV field kit contains as well thecorresponding quick couplers and dust protection. Thebelow listed control and mounting parts have to beordered separately according to the mounting positionof the M-SCV.
Models: 6020 - 6620 (without cab), 6020SE - 6620SE
Code Bundle Description
AL169789M-SCV Series 200 with 2 ISO-DeLuxe quick couplers and dust protection housing
Bundle Description Remark QTY
AL169859 Control and mounting parts
for tractors up to serial number 375300
1
AL169860 Control and mounting parts
for tractors from serial number 375301
1
Bundle Description Remark QTY
AL169859 Control and mounting parts 1
Bundle Description Remark QTY
AL169861 Control and mounting parts and spacer housing 1
Bundle Description Remark QTY
AL169862Single lever control,2 functions and mounting parts
controls M-SCV on Position III and IV
1
AL153498Shifter rod for single lever control, console-integrated
for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission
1
Code Bundle Description
AL169790M-SCV Series 201 with 2 ISO-DeLuxe quick couplers and dust protection housing
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-11
Control and mounting partsFor M-SCV installation on Position I
For M-SCV installation on Position II
For M-SCV installation on Position III
For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)
300 Series M-SCV
In addition to all the features of 200 Series M-SCVs,300 Series M-SCVs incorporate a temperaturecompensated adjustable flow restrictor whichcontinuously regulates the flow of oil between zeroand maximum in both directions regardless of oiltemperature. This will give day-long constant speed operation ofhydraulic motors and rams without the need foradjustment. Selectable detents allow the operator to choose thesame modes as the 200 Series M-SCVs, and inaddition a hydraulic detent, where the M-SCV leverwill remain selected until a pre-set pressure is reached.It will then ’kickout’ of the detent to the neutralposition automatically. This mode is particularly usefulwhen repeat M-SCV operations are performed, such asturning a plough or drill marker cycling.The M-SCV field kit contains as well thecorresponding quick couplers and dust protection. Thebelow listed control and mounting parts have to beordered separately according to the mounting positionof the M-SCV.
Models: 6020 - 6920S
Control and mounting partsFor M-SCV installation on Position I
For M-SCV installation on Position II
For M-SCV installation on Position III
Bundle Description Remark QTY
AL169859 Control and mounting parts
for tractors up to serial number 375300
1
AL169860 Control and mounting parts
for tractors from serial number 375301
1
Bundle Description Remark QTY
AL169859 Control and mounting parts 1
Bundle Description Remark QTY
AL169861 Control and mounting parts and spacer housing 1
Bundle Description Remark QTY
AL169862Single lever control,2 functions and mounting parts
controls M-SCV on Position III and IV
1
AL153498Shifter rod for single lever control, console-integrated
for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission
1
Code Bundle Description
AL169791M-SCV Series 300 with 2 ISO-DeLuxe quick couplers and dust protection housing
Bundle Description Remark QTY
AL169859 Control and mounting parts
for tractors up to serial number 375300
1
AL169860 Control and mounting parts
for tractors from serial number 375301
1
Bundle Description Remark QTY
AL169859 Control and mounting parts 1
Bundle Description Remark QTY
AL169861 Control and mounting parts and spacer housing 1
AL169957 Right hand End Cover and connecting parts
if on Pos III or IV has not yet been installed aM-SCV Series 300/301 or anE-SCV
1
6020 Series Tractors-12 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)
301 Series M-SCVThis valve features: see 300 Series M-SCV
The M-SCV field kit contains as well thecorresponding quick couplers and dust protection. Thebelow listed control and mounting parts have to beordered separately according to the mounting positionof the M-SCV.
Models: 6020 - 6620 (without cab), 6020SE - 6620SE
Control and mounting partsFor M-SCV installation on Position I
For M-SCV installation on Position II
For M-SCV installation on Position III
For M-SCV installation on Position IV(not for tractors with AutoPowr transmission)
Bundle Description Remark QTY
AL169862Single lever control,2 functions and mounting parts
controls M-SCV on Position III and IV
1
AL153498Shifter rod for single lever control, console-integrated
for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission
1
AL169957 Right hand End Cover and connecting parts
if on Pos III or IV has not yet been installed aM-SCV Series 300/301 or anE-SCV
1
Code Bundle Description
AL169792M-SCV Series 301 with 2 ISO-DeLuxe quick couplers and dust protection housing
Bundle Description Remark QTY
AL169859 Control and mounting parts
for tractors up to serial number 375300
1
AL169860 Control and mounting parts
for tractors from serial number 375301
1
Bundle Description Remark QTY
AL169859 Control and mounting parts 1
Bundle Description Remark QTY
AL169861 Control and mounting parts and spacer housing 1
AL169957 Right hand End Cover and connecting parts 1
Bundle Description Remark QTY
AL169862Single lever control,2 functions and mounting parts
controls M-SCV on Position III and IV
1
AL153498Shifter rod for single lever control, console-integrated
for tractors up to serial number 398655 with PowrQuad Plus or AutoQuad transmission
1
AL169957 Right hand End Cover and connecting parts
if on Pos III or IV has not yet been installed aM-SCV Series 300/301 or anE-SCV
1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-13
Additional shut-off valves for selective control valvesThe shut-off valves can be installed to prevent leakageat the hydraulic SCV connections.
Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515
SCV End Covers
Possible SCV End Covers - Left hand
Models: 6020 - 6920S, 6020SE - 6620SE
Models: 6020 - 6920S, 6020SE - 6520SE
Models: 6320 - 6920SNote: for suspended cab; paint operation for service
needed
Code Bundle DescriptionAL171027 Shut-off valve
Code Bundle Description
AL77028 Left hand End Cover assembly, standard
Code Bundle Description
AL163533 Left hand End Cover with additional connection
Code Bundle Description
AL163534 Left hand End Cover with pressure- and LS port
6020 Series Tractors-14 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Possible SCV End Covers - Right hand
Models: 6020 - 6920S
Models: 6020 - 6920S, 6520SE, 6215, 6515
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: for 6020 - 6620 with PC and PFC systems
for 6820 - 6920S with PFC systemfor 6020SE - 6520SE with PC systemfor 6215, 6515 with HydraVantage hydraulic system
Note: Depending on the options of the tractor, additional spare parts may be required.
Code Bundle Description
AL77680 Right hand End Cover assembly, standard
Code Bundle Description
AL160414 Right hand End Cover with 300 Series SCV (position 3 and 4)
Code Bundle Description
AL158831 Special End Cover for external control unit on right hand side
Bundle Description Remark QTY
AL157634 hydraulic hose, 475mm length
for 6820 - 6920S with SCV at position 3
1
AL157635 hydraulic hose, 420 mm length
for 6820 - 6920S without SCV at position 3
1
AL157636 hydraulic hose,380 mm length
for 6020 - 6620 with or without SCV at position 3
1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-15
Kit for return connection on hydraulic motor (PC-system and PFC-system)
Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note:On PC hydraulic systems, the hydraulic motor
return must not be used continuously at maximum oil withdrawal.
Note: If a hydraulic coupler socket is required instead of internal half coupler AL81368, please order part AL81369 separately.
Power Beyond PlatePower beyond allows the use of the tractor pump topower implements that have ICV (independent controlvalves) or orbital motors. For functions requiringadditional hydraulic power, the power beyond platereplaces the fourth SCV. Pressure return and loadsensing ports are provided for hook-up of additionalequipment, such as ICV, front loader etc.
Models: 6120 - 6920S, 6020SE - 6620SENote: with ICV
Power Beyond Application Valve
Models: 6020 - 6920S, 6020SE - 6520SE
Code Bundle DescriptionAL169965 Pressure-free return circuit
Code Bundle Description
AL118486Right hand End Cover, Power Beyond (with pressure-, return- and LS port) with Power Boost
Code Bundle DescriptionAL112428 Power Beyond Application valve
6020 Series Tractors-16 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Power Beyond Coupler on rockshaft valveIn addition to the Power Beyond plate this kit includestwo female and two male couplers, two hydrauliclines, dust protection and hardware. ICV’s controlledimplements or attachments connected to the hydraulicsystem of the tractor are provided with a Pressure-On-Demand (POD)-signal, pressured oil and a pressure-free return line. Connection/disconnection is eased byquick coupler.
Models: 6020 - 6620Note: includes left hand End Cover AL163533 (with
the Load Sense connection)Note:For ICV’s without POD a special valve block is
required.Note:up to tractor serial number 398655
Models: 6020 - 6620Note: please order in addition AL158831 (End Cover
for external control unit on right hand side)Note: from tractor serial number 398656
Code Bundle Description
AL82290 Power Beyond Coupler on rockshaft valve
Code Bundle Description
EC300182 Power Beyond Coupler on rockshaft valve
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-17
2.2 M-ICV AND E-ICV
Mechanical Independent Control Valve(M-ICV) - 2 sectionThe M-ICV (mechanical independent control valve) isa separate control valve block unite mounted below theright hand side of the cab. It is fitted below the cab andsupplied with hydraulic power through the PowerBeyond valve or ICV-Cover.It is ideal for single lever control of front loader orfront hitch work.The valve features functions similar to that of twoSCVs.
• 1st function features: extend neutral retract and adetented float position
• 2nd function: extend neutral retract• The M-ICV is not detented for hydraulic motors • Both functions feature a flow capacity of 96 l/min.
at stand-by pressure and proportional flow • When a 96 l/min pump is fitted, maximum flow
capacity can be achieved with reduced engine rpmfor more comfortable operation
• More than one function may be operatedsimultaneously to speed up operations and savetime
• Proportional valves give fine adjustment forinching and operation acceleration/decelerationduring long travel movements
• A balance valve between the two functions ensuresthat both may be operated at once, ensuringprofessional operation capability, for exampleraise boom and roll back bucket
Electrical Independent Control Valve(E-ICV) - 2 or 3 sections
The E-ICV is a separate control valve unit mountedbelow the right-hand side of the cab with the functionsof two or optionally three* SCVs.
Spool movement is no longer achieved mechanically,but electrically through stepper motors (similar to theprecise, reliable and proven stepper motor rear hitchcontrol).Valve Functions All 3 valves feature proportional flow and a flowcapacity of 96 l/min. at stand-by pressure. Lever movements are transformed into electricimpulses inducing - if required - minute movementsfor precise stacking or loading operations
• This unique fine adjustment allows inchingoperation or acceleration/ deceleration duringlonger piston travel movements
• Up to three functions may be operatedsimultaneously to speed up manoeuvres whileensuring professional, parallel operation capability
• The selectable shake-out position permitsoptimum bucket cleaning through automaticvibration mode when overriding the position formax. dump speed
• Allows pre-compaction during back blading infloat position
*Only when the three SCVs option is chosen,automatically the option for the fourth and fifth SCVsis provided.
M-ICV and E-ICV field kits
Models: cab only: 6120 - 6620, 6020SE - 6520SENote: not for low profile tractorsNote:up to tractor serial number 398655Note: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle DescriptionAL159273 M-ICV & E-ICV field kit
Bundle Description Remark QTY
AL155376 Oil line (pressure) with suspended cab 1
Al155377 Oil line (LS) with suspended cab 1
AL155378 Oil line (return) with suspended cab 1
AL116239 Oil line (pressure) without suspended cab 1
AL116240 Oil line (LS) without suspended cab 1
AL116241 Oil line (return) without suspended cab 1
AL157634 Hydraulic hose (LS) with PC hydr. system 1
AL157636 Hydraulic hose (LS) with PFC hydr. system 1
AL159274 Service kit M-ICV, 2 section for M-ICV 1
AL159296 Service kit E-ICV, 2 section for E-ICV 1
6020 Series Tractors-18 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6820 - 6920SNote:up to tractor serial number 398655Note: Depending on the options of the tractor,
additional spare parts may be required.
M-ICV with multi-function leverA mechanically operated multi-function lever may befitted to the front corner of the right hand console inthe cab to control up to two SCVs. The lever is usefulfor one touch operations of either one or two SCVcontrolled implements, and of particular interest whereuse is frequent, for example with front hitch control.
Models: low profile cab only: 6020SE - 6620SENote: up to tractor serial number 398655Note: Depending on the options of the tractor,
additional spare parts may be required.
AL159297 Service kit E-ICV, 3 section for E-ICV 1
AL164525Wiring harness transmission rear, E-SCV or E-ICV
with CommandArm 1
AL164526 Wiring harness transmission rear, E-ICV
for E-ICV without CommandArm 1
AL157528Wiring harness transmission rear, ECE or SAE with E-SCV or E-ICV
for E-ICV without CommandArm; not required for suspended front axle or Premium Plus tractors
1
AL159344 Joystick for E-ICV control for E-ICV without CommandArm 1
AL159345 Joystick for E-ICV control for E-ICV with CommandArm 1
AL116589 Joystick for M-ICV control for M-ICV 1
AL153498 Shifter rod with grip, autoshift
with AutoQuad or PowrQuad Plus transmission
1
Code Bundle DescriptionAL159275 M-ICV & E-ICV field kit
Bundle Description Remark QTY
AL155379 Oil line (pressure) with suspended cab 1
AL155380 Oil line (LS) with suspended cab 1
AL155381 Oil line (return) with suspended cab 1
AL116242 Oil line (pressure) without suspended cab 1
AL116243 Oil line (LS) without suspended cab 1
AL116244 Oil line (return) without suspended cab 1
AL157634 Hydraulic hose (LS) with SCV at pos. 3 1
AL157635 Hydraulic hose (LS) without SCV at pos. 3 1
AL159274 Service kit M-ICV, 2 section for M-ICV 1
AL159296 Service kit E-ICV, 2 section for E-ICV 1
AL159297 Service kit E-ICV, 3 section for E-ICV 1
AL164525Wiring harness transmission rear, E-SCV or E-ICV
with CommandArm 1
AL164526 Wiring harness transmission rear, E-ICV
for E-ICV without CommandArm 1
Bundle Description Remark QTY
AL157527Wiring harness transmission rear, ECE with E-SCV or E-ICV
for E-ICV without CommandArm; not required for tractors with HCS or Premium Plus tractors
1
AL159344 Joystick for E-ICV control for E-ICV without CommandArm 1
AL159345 Joystick for E-ICV control for E-ICV with CommandArm 1
AL116589 Joystick for M-ICV control for M-ICV 1
AL153498 Shifter rod with grip, autoshift
with AutoQuad or PowrQuad Plus transmission
1
Code Bundle DescriptionAL117838 M-ICV field kit with multi-function lever
Bundle Description Remark QTYL113757 Holder 1
L114010 Suction hose, L = 1020 mm 1
L114011 Hose ID 25 - 630 mm 1
Bundle Description Remark QTY
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-19
M-ICV field kits - 2 section
Models: cab only: 6020 - 6920S,6020SE - 6620SE (not with low profile cab,not for tractors with CommandArm)
Note: from tractor serial number 398656Note: If M-ICV and power beyond spacer without SCV
pos. 3 is used, order additionally 3 x L169846 (screw).
Note: If M-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).
Note: Depending on the options of the tractor, additional spare parts may be required.
Models: cab only: 6020SE - 6420SE(with low profile cab)
Note: from tractor serial number 398656Note: If M-ICV and power beyond spacer without SCV
pos. 3 is used, oder additionally 3 x L169846 (screw).
Note: If M-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).
E-ICV field kits - 2 or 3 sections
Models: cab only: 6120 - 6920SNote: from tractor serial number 398656Note: If E-ICV and power beyond spacer without SCV
pos. 3 is used, oder additionally 3 x L169846 (screw).
Note: If E-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).
Note: Depending on the options of the tractor, additional spare parts may be required.
L113893 Special screw, M14 x 110 1
L114657 Bracket only with exhaust stack to bottom right 1
L114658 Exhaust pipe only with exhaust stack to bottom right 1
L113323 Bracket only with exhaust stack to bottom right 1
Code Bundle DescriptionAL162450 M-ICV field kit
Bundle Description Remark QTY
AL164711 Basic Kit 6020 - 6620, 6020SE - 6620SE 1
AL116239 Pressure line with unsuspended cab 1
AL163522 Load sensing line with unsuspended cab 1
AL163523 Return line with unsuspended cab 1
AL155376 Pressure line with suspended cab 1
AL163525 Load sensing line with suspended cab 1
AL163526 Return line with suspended cab 1
AL116536 Pressure line with open operator’s station 1
AL116537 Load sensing line with open operator’s station 1
AL116538 Return line with open operator’s station 1
Bundle Description Remark QTYAL164710 Basic Kit 6820 - 6920S 1
AL163524 Pressure line with unsuspended cab 1
AL116243 Load sensing line with unsuspended cab 1
Bundle Description Remark QTY
AL116244 Return line with unsuspended cab 1
AL163527 Pressure line with suspended cab 1
AL155380 Load sensing line with suspended cab 1
AL155381 Return line with suspended cab 1
Code Bundle Description
AL164712 M-ICV field kit with power beyond plate and needed oil lines
Code Bundle DescriptionAL159296 E-ICV field kit with 2 sections
Bundle Description Remark QTYAL164711 Basic Kit 6120 - 6620 1
AL116239 Pressure line with unsuspended cab 1
AL163522 Load sensing line with unsuspended cab 1
AL163523 Return line with unsuspended cab 1
AL155376 Pressure line with suspended cab 1
AL163525 Load sensing line with suspended cab 1
AL163526 Return line with suspended cab 1
Bundle Description Remark QTY
6020 Series Tractors-20 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6120 - 6920SNote: from tractor serial number 398656Note: If E-ICV and power beyond spacer without SCV
pos. 3 is used, oder additionally 3 x L169846 (screw).
Note: If E-ICV and power beyond spacer with SCV pos. 3 is used, order additionally 3 x R95614 (screw).
Note: Depending on the options of the tractor, additional spare parts may be required.
Flow control for E-ICV
Models: 6120 - 6920SNote: from tractor serial number 398656Note: Depending on the options of the tractor,
additional spare parts may be required.
Bundle Description Remark QTYAL164710 Basic Kit 6820 - 6920S 1
AL163524 Pressure line with unsuspended cab 1
AL116243 Load sensing line with unsuspended cab 1
AL116244 Return line with unsuspended cab 1
AL163527 Pressure line with suspended cab 1
AL155380 Load sensing line with suspended cab 1
AL155381 Return line with suspended cab 1
Code Bundle DescriptionAL159297 E-ICV field kit with 3 sections
Bundle Description Remark QTYAL164711 Basic Kit 6120 - 6620 1
AL116239 Pressure line with unsuspended cab 1
AL163522 Load sensing line with unsuspended cab 1
AL163523 Return line with unsuspended cab 1
AL155376 Pressure line with suspended cab 1
AL163525 Load sensing line with suspended cab 1
AL163526 Return line with suspended cab 1
Bundle Description Remark QTYAL164710 Basic Kit 6820 - 6920S 1
AL163524 Pressure line with unsuspended cab 1
AL116243 Load sensing line with unsuspended cab 1
AL116244 Return line with unsuspended cab 1
AL163527 Pressure line with suspended cab 1
AL155380 Load sensing line with suspended cab 1
AL155381 Return line with suspended cab 1
Code Bundle DescriptionAL170031 Flow control for E-ICV
Bundle Description Remark QTY
AL166106 Instrument, dual gauge plus II/ECE
without AutoPowr transmission 1
AL166108 Instrument, dual gauge plus II/ECE
with AutoPowr transmission 1
Bundle Description Remark QTY
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-21
2.3 ELECTRICALLY-ACTUATED SELECTIVE CONTROL VALVE -
E-SCVThe electrically-actuated SCVs with adjustable flowrates and timed detents are exclusively available forthe 6020 Series John Deere Premium Plus cab models .A programmable electronic controller controls SCVfunctions via a solenoid in each valve. The valve hasno direct control linkage. Out of this result thefollowing advantages:
• Eases operator effort, reducing shift forces andfatigue in repetitive operations.
• Reduced wear of parts and lower maintenancecosts.
SCV controls are located in the Command ArmTm foreasier operation. Valve can easily be re-programmedfrom the operator’s seat for different implements orvariable conditions. Information on valve status isdisplayed on the LCD display, located on the centerdashboard unit.
E-SCVs
The E-SCV field installation kit contains in addition tothe E-SCV parts as well the needed actuatingcomponents for installation in the operator’s station.
Models: cab only: 6320 - 6920SNote:only for tractors with CommandArmNote: If SCV will be installed on Position III please
order separately:
Code Bundle Description
AL169971 Kit fo parts for E-SCV’s atposition III or IV
Bundle Description Remark QTY
AL169957 Right hand End Cover and connecting parts
if on Pos III or IV has not yet been installed aM-SCV Series 300/301 or anE-SCV
1
AL161388 Spacer (Power Beyond) with adjustable LS-bleed
for tractors from serial number 398656 without ICV’s
1
6020 Series Tractors-22 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
2.4 MISCELLANEOUS
Additional oil reservoir 12,5 litres
An additional hydraulic oil tank is available to increasethe hydraulic oil capacity with 12,5 litres (from 25 to37,5 litres max. permissible oil withdrawal for shortterm use (e.g. tipping trailers), while allowing thetractor to run on inclines up to 18 degrees). Thisreservoir mounts above the main hydraulic pump,under the cab.
Models: cab only: 6120 - 6620Note:This Kit is no longer available, please order
individual parts according to parts catalog.
Additional oil reservoir 14 litres
For applications which need more than 12,5 litresadditional hydraulic oil, John Deere offers a hydraulicoil reservoir with 14 litres to increase the whithdrawalcapacity of your hydraulic system.
Models: cab only: 6120 - 6420S
Note: for tractors with ICV order in addition
Note: for tractors with AutoPowr transmission order in addition
Note: for tractors without AutoPowr transmission order in addition
Models: cab only: 6520 - 6620Note: for tractors with ICV order in addition
Models: cab only: 6820 - 6920S
Code Bundle DescriptionAL158981 Additional oil reservoir
Code Bundle Description
8897 AL163978 Hydraulic oil reservoir - 14 litres, with quick connector system
Bundle Description Remark QTYL158929 Protection hose 1
Bundle Description Remark QTY19M8169 Screw 2
Bundle Description Remark QTY19M8823 Screw 2
Code Bundle Description
AL163979 Hydraulic oil reservoir - 14 litres, with quick connector system
Bundle Description Remark QTYL158929 Protection hose 1
Code Bundle Description
AL163980 Hydraulic oil reservoir - 14 litres, with quick connector system
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-23
Models: cab only: 6120 - 6620Note: for tractors with air brakes please order in
addition:
Code Bundle Description
AL172666 Additional hydraulic oil reservoir -14 litres, with quick connector system
Bundle Description Remark QTYAL171461 Line 6120 - 6420 1AL171462 Line 6520, 6620 1
AL171460 Holding clamp for compresssed air tank 1
19M7496 M12 cap screw 219M8049 M10 cap screw 224M7028 Washer 214M7274 M10 hex nut 2
6020 Series Tractors-24 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
3 ENGINE
Bottom guard for fuel tanksRecommended in adverse conditions, like scrub,woodland or land reclamation.
Models: cab only: 6520 - 6920, 6520SE, 6620SE
Models: 6020 - 6420S
Models: 6820 - 6920S
Models: cab only: 6820 - 6920S
Fuel PreheaterParticularly important in the cold season, fuelpreheaters prevent fuel waxing and subsequent filterblockage by automatically actuating a heater elementin the filter at low temperatures.
Models: 6020 - 6920S, 6020SE - 6520SENote: not for level 4 engine, i.e. not for Bosch VP44
injection pump
Code Bundle Description8875 AL118241 Base guard for fuel tank, 207 l
Code Bundle Description
8875 AL156243 Base guard for fuel tank (160 l, 165 l, 185 l)
Code Bundle Description8875 AL159939 Base guard for fuel tank, 250 l
Code Bundle DescriptionAL163513 Base guard for fuel tank, 325 l
Code Bundle DescriptionAL158520 Fuel Preheater
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-25
Models: 6320 - 6920SNote: for level 4 engine, i.e. for Bosch VP44 injection
pump
Coolant heaterPlugs into 220-volt electric wall socket, the integratedheater element warms the engine block to provideeasier starting even in the coldest weather.
Models: cab only: 6120 - 6920S, 6020SE - 6520SE
Cold start package
Models: cab only: 6120 - 6920S, 6020SE - 6520SE
Note:with PowrQuad or AutoQuad transmission for use in Sweden, Finland and Norway
Note: if the tractor is not already equipped with a coolant preheater, please order in addition 1 x AL151508 coolant preheater, 230V
Code Bundle DescriptionAL159374 Fuel Preheater
Code Bundle DescriptionAL151508 Coolant preheater, 230V
Code Bundle DescriptionAL158792 Cold start package, 230V
6020 Series Tractors-26 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Fuel pre filtersProvide higher water and dirt protection to the fuelsystem of your tractor. Bad fuel quality requires bestfiltration. For this purpose pre filters can provide extrafiltration. Therefore, John Deere offers several prefilter kits which provide:
• pre filtration of dust and particles to support themain fuel filter
• separation of water to protect the fuel injectionpump and engine
The pre filter kits are mounted additionally to theordinary fuel filter and are supplied with all mountingand connecting parts. The fuel pre filters have thesame service interval as the fuel filter.
Models: 6020 - 6420S, 6020SE - 6420SE
Note:Depending on the options of the tractor, additional spare parts may be required.
Models: 6520, 6520SE, 6515Note: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle DescriptionAL160215 Fuel pre filter
Bundle Description Remark QTY
AL159197 speed control rod assembly
for 6020, 6320-6420S, 6020SE, 6320SE, 6420SE with Lucas injection pump (mech.)
1
AL159198 speed control rod assembly
for 6120, 6220, 6120SE, 6220SE, 6215 with Stanadyne injection pump (mech.)
1
AL159199 speed control rod assembly
for 6120 low profile, 6220 low profile without cab, with Stanadyne injection pump (mech.)
1
AL159200 speed control rod assembly
for 6020SE low profile, 6320SE low profile, 6420SE low profile, with Lucas injection pump (mech.)
1
AL159201 speed control rod assembly
for 6020 low profile, 6320 low profile, 6420 low profile without cab with Lucas injection pump (mech.)
1
AL159202 speed control rod assembly
6120SE low profile, 6220SE low profile with Stanadyne injection pump (mech.)
1
Code Bundle DescriptionAL160216 Fuel pre filter
Bundle Description Remark QTY
AL159326 speed control rod assembly
for Lucas injection pump (mech.) 1
AL159327 speed control rod assembly
for Stanadyne injection pump (mech.) 1
Bundle Description Remark QTY
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-27
Models: cab only: 6320 - 6420SNote: with electronical fuel injection, level 4
Models: cab only: 6620 - 6920SNote:with electronical fuel injection, level 4
Water in Fuel Sensor
Models: 6320 - 6920S
Note: for 4 cylinder tractors with 4-ValveCommonRail PowerTech enginefrom engine serial-no. 800.000up to engine serial-no. 811.593
Note: for 6 cylinder tractors with 4-ValveCommonRail PowerTech enginefrom engine serial-no. 800.000up to engine serial-no. 811.673
Models: 6020 - 6220 (DE10 injection pump),6320 - 6920S (CommonRail injection system),6020SE - 6620SE (DE10 injection pump),6215, 6515 (DE10 injection pump)
Note: for tractors with 2-Valve PowerTech enginefrom engine serial-no. 800.000
Note: for 4 cylinder tractors with 4-ValveCommonRail PowerTech enginefrom engine serial-no. 811.594
Note: for 6 cylinder tractors with 4-ValveCommonRail PowerTech enginefrom engine serial-no. 811.674
Protective panelsOn tractors without cab the protective panel reducesthe heat flow coming from the side grill to theoperator’s station. The engine cooling performance isnot affected.
Models: without cab: 6020 - 6420, 6215
Models: without cab: 6520, 6620, 6515
Code Bundle DescriptionAL160217 Fuel pre filter
Code Bundle DescriptionAL160218 Fuel pre filter
Code Bundle DescriptionRE509677 Wiring harness, water sensor, 12V
Code Bundle DescriptionRE519696 Wiring harness, water sensor, 12V
Code Bundle DescriptionAL161912 Air flow deflector - protective panel
Code Bundle DescriptionAL161913 Air flow deflector - protective panel
6020 Series Tractors-28 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
4 ELECTRICAL - ELECTRONICAL COMPONENTS
4.1 LIGHTS
Beltline Headlights H4These adjustable head lamps are fitted left and right tothe beltline of the cab. The halogen-type H4 bulbsprovide excellent illumination to the front and arestrongly recommended if front mounted equipment isto be used, especially e.g. for highway use when aloader or front linkage mounted implements obscurethe beam of the normal head lamps.
Models: cab only: 6120 - 6920SNote: not compatible with H3 working lights
beltline-mounted (code: 9071)
Models: cab only: 6120 - 6920S
Models: cab only: 6020SE - 6520SE
Models: cab only: 6020SE - 6520SE
Code Bundle Description
9070 AL157097 2 beltline-mounted headlights H4,for right hand traffic
Code Bundle Description
AL159314 2 beltline-mounted headlights H4, for left hand traffic
Code Bundle Description
AL161122 2 beltline-mounted headlights H4,for right hand traffic
Code Bundle Description
AL161125 2 beltline-mounted headlights H4, for left hand traffic
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-29
Working lights H3 - Beltline-mountedThese adjustable lamps are fitted left and right tobeltline of the cab. Especially for normal off-road usethe halogen-type H3 bulbs provide excellentillumination of a loader, front-mounted equipment orsoil and crops and to the side of the tractor.
Models: cab only: 6120 - 6920SNote: not compatible with H4 headlights beltline-
mounted (code: 9070).
Front corner work lightsFor increased illumination of the front working area,additional lamps are directed downward and outwardto light the area immediately inside and ahead of thefront wheels. This will help operators following aplough furrow or drill marker furrow at night. Thelamps may be switched off for road travel.
Models: 6020 - 6920S, 6020SE - 6620SENote: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description9071 AL157099 2 working lights H3 beltline-mounted Code Bundle Description
AL159352 Front corner work lights
Bundle Description Remark QTY
AL117371 Rocker switch6020 - 6420 with open operator’s station or low-clearance operator’s station
1
AL114046 Rocker switch 6120 - 6920S with cab 1
6020 Series Tractors-30 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Work lights open operator’s station
Models: without cab: 6020 - 6520
Additional work lights cab-roof mounted
Models: cab only: 6120 - 6920SNote: if the tractor is equipped with wiring harness
AL159155 ( from tractor serial no. XXXXXX) which provides two connections for work lights on the cab roof , order in addition wiring harness AL156254 which provides the needed four connections to install the work lights
Models: cab only: 6120 - 6920SNote: if the tractor is equipped with wiring harness
AL159155 ( from tractor serial no. XXXXXX) which provides two connections for work lights on the cab roof , order in addition wiring harness AL156254 which provides the needed four connections to install the work lights
Models: cab only: 6020SE - 6620SE
Models: cab only: 6020SE - 6620SE
Xenon rear work lights
Code Bundle DescriptionAL79915 Work lights, at rear of 2-post ROPS
Code Bundle Description
AL161617 Two additional work lights, cab-roof mounted, FRONT
Code Bundle Description
AL161618 Two additional work lights, cab-roof mounted, REAR
Code Bundle Description
AL161895 Two additional work lights, cab roof mounted, FRONT
Code Bundle Description
AL161897 One additional work light, cab roof mounted, REAR
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-31
Xenon headlights are firmly established within theautomobile industry, for giving the driver increasedvisibility. Xenon lights offer more advantages when used in thefield and John Deere gives the operator the opportunityto use them to their fullest potential. Advantages:
• 2.5 times the light flux (illuminance) of a halogenFree Form working light.
Models: cab only: 6120 - 6920S
Code Bundle DescriptionAL172073 Xenon working lights, rear
6020 Series Tractors-32 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
4.2 MISCELLANEOUS
Multiple power outlet socket
Models: cab only: 6120 - 6920SNote: Depending on the options of the tractor,
additional spare parts may be required.
3-terminal power outlet socketThe 3-pin socket provides both 5 and 25 amp suppliesfrom the first two pins. The third pin is connected toearth.
Models: cab only: 6120 - 6920S, 6020SE - 6620SE
Battery cut-off switch (4 cyl.)
Models: 6120 - 6420S, 6020SE - 6420SENote: order in addition adapter wiring harness
AL166461 for SE models up to tractor serial number 413917
Note: Depending on the options of the tractor, additional spare parts may be required.
Battery cut-off switch (6 cyl.)
Models: 6520 - 6920S, 6520SE, 6620SENote: order in addition adapter wiring harness
AL166461 for SE models up to tractor serial number 413917
Note: Depending on the options of the tractor, additional spare parts may be required.
Code Bundle Description9146 AL158785 Multiple power outlet socket
Bundle Description QTYAL116176 Wiring harness 1AL155784 Bracket (with CommandArm) 1AL117211 Bracket (without CommandArm) 1
Code Bundle DescriptionAL160799 3-terminal power outlet socket
Code Bundle DescriptionAL171054 Battery cut-off switch
Bundle Description QTY
AL153812 Battery-negative cable / 1.500 mm length (up to motor serial-no. 799.999) 1
AL159445 Battery-negative cable / 1.500 mm length (from motor serial-no. 800.000) 1
Code Bundle DescriptionAL171055 Battery cut-off switch
Bundle Description QTY
AL153812 Battery-negative cable / 1.500 mm length (up to motor serial-no. 799.999) 1
AL159445 Battery-negative cable / 1.500 mm length (from motor serial-no. 800.000) 1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-33
5 MISCELLANEOUS
5.1 OPERATOR´S STATION
SeatingSeats are ergonomically designed and covered instylish, easy to clean cloth upholstery.
Active Carbon Layer An active carbon layer is used in the seat, to allow it tobreathe. This results in less sweating and furtherincreases the comfort of the operator.
Low Frequency SuspensionThe low frequency suspension technology nowabsorbs shocks as low as 1.2 Hz and offers superiorback protection and driving comfort. In the past the driver had to select a hard suspension toavoid bottoming of the seat when it reaches the lowerlimit. With the low frequency seat a soft setting of thesuspension is possible without the risk of hitting theupper or lower limit.This is achieved with an increased air volume and lowfriction bearings.No additional shock absorber is required.The system is designed according to suit the hydrauliccab suspension frequency of 1.0 Hz and the TLS II.The result is a floating but firm and sure feeling for thedriver for relaxed driving and better health.
Super Comfort seat - MSG85
Mechanical seats features: • Mechanical seat suspension• Horizontal adjustment 210 mm• 100 mm vertical suspension travel• Backrest inclination• Mechanical weight and height adjustment (80 mm)• Mechanical lumbar support• Horizontal suspension (-22 mm/+27 mm)• Lateral suspension (+/-25 mm)• Seat pan depth adjustment • Seat cushion inclination• Active carbon layer• Fold down armrest• +/-10° armrest inclination• Operators manual holder• 15° Swivel
Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: order in addition seat belt AL117366 and
shield right hand side L114944 and shield left hand side L114945
Models: all open operator’s station models
Code Bundle Description
AL164161 Super Comfort seat MSG85, mechanical suspended
Code Bundle Description
AL164159Super Comfort seat MSG 85, mechanical suspended;seat cover yellow, vinyl
6020 Series Tractors-34 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Super Air Comfort seat - MSG 95
Air suspended seat features:• Air suspension with low frequency technology or
air suspension with high frequency suspension fordifferent suspension conditions
• Horizontal adjustment 210 mm for easypositioning in the cab
• 100 mm vertical suspension travel to absorb eventhe hardest shocks
• Backrest inclination• Integrated telescopic backrest extension from 475-
645 mm for optimum back support• Automatic weight and height adjustment (80 mm)
brings the ideal position for every body height• Mechanical or pneumatic lumbar support
(pneumatic support allows a more quick and exactadjustment of the lumbar support to prevent backproblems)
• Horizontal suspension (-22 mm/+27 mm) to damposcillations of implements, trailers at high speed orin difficult terrain
• Lateral suspension (+/- 25mm) reliefs the driverfrom side shocks
• Seat pan depth adjustment to optimize the supportof the legs
• Seat cushion inclination in 4 steps to reliefpressure from the knees
• Active carbon layer• Seat heating• Fold down armrest• +/-10° armrest inclination• Height adjustable armrest• Operators manual holder• Swivel +/-15° for easy access in and out of the seat
as well as easier control of rear implements• Optional CommandArm
Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: order in addition seat belt AL117366
Models: cab only: 6320 - 6920SNote: for tractors equipped with AutoPowr;
order in addition seat belt AL155363
Super Comfort seat
• Air suspension, low frequency• Cushion cloth brown “Alaska” with carbon• Foldable armrests with height and angle
adjustment• Height adjustment 80 mm• Horizontal adjustment 210 mm• Backrest angle adjustment• Fore and aft isolator• Lateral horizontal isolator• Lumbar support• Weight adjustment• Seat depth and angle adjustment• Adjustable swivel +/- 180°• Seat switch• Seat heating• Manual holder• Seat belt• Headrest
Models: cab only: 6120 - 6920S
Code Bundle Description
AL154352Super Air Comfort seat MSG95, air suspended , with seat switch (without CommandArm)
Code Bundle Description
AL154354Super Air Comfort seat MSG95, air suspended, with seat switch (with CommandArm)
Code Bundle DescriptionAL157569 Super Comfort seat MSG95
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-35
Comfort seat
• Cushion vinyl yellow• Mechanical suspension• Foldable armrests• Height adjustment 80 mm• Horizontal adjustment 210 mm• Weight adjustment• Seat swith• Seat belt
Models: without cab: 6020 - 6420Note: if seat belt is required please
order in addition AL117254
Seat belt for Super Comfort seatsFor operator’s safety, recommended for all cabtractors.
Models: 6120 - 6920SNote: for seat MSG 85 and MSG 95 without
CommandArm
Models: cab only: 6020 - 6920S, 6020SE - 6520SENote: for seat MSG 95 with CommandArm
Models: without cab: 6020 - 6420Note: for seat MSG44
Backrest extensionFor customers who require greater upper back supportfor MSG85 and MSG95 seats.
Models: cab only: 6120 - 6920S, 6020SE - 6520SENote: if the mounting parts are required please order
in addition 16M7114 (rivet) and AZ58968 (backrest complete)
Code Bundle DescriptionAL119283 Comfort seat MSG44
Code Bundle Description9240 AL117366 Seat belt
Code Bundle DescriptionAL155363 Seat belt
Code Bundle DescriptionAL117254 Seat belt
Code Bundle Description
7642 AL117478 Kit includes backrest extension without mounting parts
6020 Series Tractors-36 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
External swivelThe seat can be swiveled 180 degrees which allows aneasy operation of rear mounted equipment.
Models: 6020 - 6920S, 6020SE - 6520SENote: for AL164161 Super Comfort seats MSG85
and AL154352 Super Air Comfort seats MSG95 without CommandArm
Passenger seat
The comfortable, soft-moulded passenger seat,complete with backrest, is located to the left of theoperator. Due to the overall roominess of the cab, the passengerseat has excellent access with plenty of head andshoulder clearance along with large leg-room area. A grab handle on the “A” post and an additional grabrail on the door will help the passenger to feel safe andsecure, even over rough terrain. When not required, the seat can be simply foldedaway.
Models: cab only: 6120 - 6920S, 6020SE - 6520SE
Safety belt for passenger seat
Models: cab only: 6120 - 6920S, 6020SE - 6520SE
Passenger seat with Suspension
The passenger seat with suspension offers a high levelof ride comfort. The shock absorbing suspensions is totally adjustablefor passenger weight.
Code Bundle DescriptionAL119292 External adapter, 180° swivel
Code Bundle Description9230 AL114321 Passenger seat (not suspended)
Code Bundle DescriptionAL117734 Safety belt for passenger seat
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-37
Suspension for passenger seatAllows easy conversion of an unsuspended passengerseat into a suspended one.
Models: cab only: 6120 - 6920S, 6020SE - 6520SE
Internal rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.
Models: cab only: 6120 - 6920S
External MirrorsLarge external mirrors provide increased trafficawareness for improved road safety and aid trailerreversing.
Telescopic rear view mirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.
Models: cab only: 6120 - 6920S
Models: cab only: 6120 - 6920S
Code Bundle Description9231 AL114856 Suspension for passenger seat
Code Bundle Description
AL151224 Additional inside rear view mirror,rear installation
Code Bundle Description7704 AL80126 Left hand telescopic rear view mirror
Code Bundle Description7705 AL80127 Right hand telescopic rear view mirror
6020 Series Tractors-38 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Front license plateIf the original number plate on the engine hood isconcealed by front-mounted implements, a new licenseplate may be attached to the rear-view mirror on theright hand side.
Models: cab only: 6120 - 6920S, 6020SE - 6620SE
Rear windscreen wiperLarge rear windscreen wipers, with intermittentswitching, maintain good vision in bad weather.Micro-switches are used to isolate wiper motorswhen the windscreens are open.
Models: cab only: 6120 - 6920S
Models: cab only: 6020SE - 6620SE
Code Bundle Description
AL162357Installation of front license platemount on tractors with front-mounted implements
Code Bundle Description9100 AL157191 Rear windscreen wiper
Code Bundle Description
AL153672 Rear window wiper andwasher system
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-39
Rear windshield washerThe reservoir for the rear windshield washer isinstalled under the right-hand step. It can be reachedeasily, allows quick refilling.
Models: cab only: 6120 - 6920S
Water deflectors for the rear window
Models: cab only: 6120 - 6920S
Performance monitor
The performance monitor is available for all 6020Series tractors.It can be installed on the upper right "A" post in thecab and is connected directly to the tractor's electricalsystem via the on-board CAN-BUS communicationlink. This dedicated system allows the monitor to beintegrated with other tractor systems.The unit features:
• Accurate "distance travelled" measurement * • Display of true forward speed **• Programmable implement width function allows
accurate measurement of area covered * • Measurement and display of wheel-slip %, both
numerically and graphically, combined with visualand audible slip alarm. **
• This helps to boost productivity and reduce tyrewear *
• Work-rate calculation in area/unit time - a usefulmanagement tool to optimise work-rates.
• "Implement-up" and "Implement-down" modelinked to the quick raise/lower switch so that theheadland travel distance is not counted whenaccurate area measurement is required.
Code Bundle DescriptionAL158767 Rear windshield washer
Code Bundle DescriptionAL162899 Water deflectors for the rear window
6020 Series Tractors-40 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
• Display of precise rear and front PTO speeds foraccurate monitoring of implement performance.
• Programmable service indicator allowing theoperator to select the number of engine hours tothe next service.
• An audible and visual signal indicates when this time has elapsed.
• This allows optimum service intervals forpeak tractor performance.
• Variable illumination intensity ensuring that theoperator can read the monitor easily, even at night.
The accuracy of the points marked * will be greatlyenhanced if the performance monitor is used inconjunction with a John Deere radar unit.The points marked with ** can only be displayed inconjunction with the John Deere radar unit.
Models: cab only: 6120 - 6920S
Radar SensorThe Radar Sensor improves your John Deere tractorsability to get the full power of your engine to theground. This results in a higher efficiency for yourland management and simultaneous soil protection. Incombination with the Performance Monitor AL156832the Radar Sensor provides:
• Accurate “distance travelled” measurement• Display of true forward speed• Accurate measurement of area covered (connected
with programmable implement width function,and hitch raise/ lower switch)
• Measurement and display of wheel-slip %• Exact work rate calculation in area/unit time
The radar sensor may be installed only on tractorsequipped with a Basic Control Unit (BCU).
Models: cab only: 6120 - 6920SNote: not for UK; not for 50km/h tractors
Models: cab only: 6120 - 6920SNote: for UK only; not for 50km/h tractors
Code Bundle Description9135 AL156832 Performance monitor
Code Bundle DescriptionAL158486 Radar Sensor unit
Code Bundle DescriptionAL158487 Radar Sensor unit for UK
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-41
Field office
The field office for the 6020 Series tractors is a largeportfolio pouch where papers, operator manuals, musiccassettes, personal notes and implements information,or even a laptop computer can be stored.The entire unit is removable to be carried like a briefcase. Its base is also pre-wired to accommodate electronicdevices like mobile telephones, or laptop computers.The lid provides a flat writing surface.
Models: cab only: 6120 - 6920S
Models: cab only: 6120 - 6420
Sun visor
Fold down sun visor to keep that low level sun out ofthe operator’s eyes, from dawn to dusk.
Models: cab only: 6120 - 6920S
Code Bundle Description9220 AL157091 Field office without beverage holder
Code Bundle DescriptionAL157090 Field office with beverage holder
Code Bundle DescriptionAL157620 Sun visor installation
6020 Series Tractors-42 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Beverage coolerSpecifically designed for the operator’s station thebeverage cooler can be securely stored and easilyremoved. Especially on hot days the operator willappreciate the insulating capacity keeping food anddrinks cool.
Models: cab only: 6120 - 6920S
Bottle holder
John Deere offers a new bottle holder for sure storageof bottles in the cab of 6020 Series tractors. Ruggedplastic in habitual John Deere design provides theaccustomed specifications and quality. The bottleholder is installed underneath the operator’s seat in thecorner between the step in the floor and the console.
Models: cab only: 6120 - 6920SNote: not in combination with suspended passenger
seat
Cup-holder
Models: cab only: 6120 - 6920SNote: the cup-holder cannot be installed on tractors
equipped with a drinks cooler
Foot throttle
Models: 6215, 6515
Code Bundle Description
9215 AL112070 Cool box (incl. fastening straps, bracket and hardware)
Code Bundle Description9216 AL156731 Bottle holder, left hand
Code Bundle Description9218 AL163826 Cup-holder on front right post
Code Bundle DescriptionAL153668 Foot throttle
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-43
Floor-mat
Models: cab only: 6120 - 6920SNote: from tractor serial no. 398656, floor-mat
L156599 requires alteration on its underside
AshtrayThe ashtray is offered with hinged lid and made ofnon-flammable materials. The design conforms to therequirements of the accustomed John Deere design.The installation is easy because the ashtray fits to theexisting recess.
Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: from tractor serial no. 357393
Code Bundle DescriptionAL168015 Rear floor-mat
Code Bundle DescriptionAL164673 Ashtray
6020 Series Tractors-44 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Cigarette lighterThe lighter is conforming to the accustomed JohnDeere Design and is supplied with socket andclamping sleeve. The power supply is provided by theregular 12V power system of your John Deere tractor.
Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: from tractor serial no. 357393
Right hand step kitsThe large, non-slip footsteps feature a quick, sure-footed entry. Footsteps are also designed to shed mudand debris from operator’s shoes.
Models: without cab: 6520, 6515
Models: 6215
Warning triangle
Models: 6120 - 6920S, 6020SE - 6520SE
Code Bundle DescriptionAL115884 Cigar lighter
Code Bundle Description8866 AL115672 Step kit, right hand
Code Bundle DescriptionAL116924 Step kit, right hand
Code Bundle DescriptionAL158762 Warning triangle
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-45
Multi-function control lever for M-ICV
A mechanically operated multi-function lever may befitted to the front corner of the right hand console inthe cab to control M-ICV. The lever is useful for fronthitch control. The integrated design of the leverensures that operations have a natural feel which soonbecome second nature.
Models: cab only: 6120 - 6920S, 6020SE - 6520SENote:not for low profileNote:up to tractor serial number 398655
Models: for open operators station: 6020 - 6920S,6020SE - 6620SE
Note: from tractor serial number 398656
Models: for open operators station low profile:6020 - 6920S, 6020SE - 6620SE
Note: from tractor serial number 398656
Models: cab only: 6020 - 6920S,6020SE - 6620SE (not with low profile cab,not for tractors with CommandArm)
Note: from tractor serial number 398656
Models: cab only: 6020 - 6920S,6020SE - 6620SE (not with low profile cab,not for tractors with CommandArm)
Note: from tractor serial number 398656
Code Bundle DescriptionAL116589 Joystick for M-ICV control
Code Bundle Description
AL164947 Joystick for M-ICV control (floor-mounted)
Code Bundle Description
AL164948 Joystick for M-ICV control (floor-mounted)
Code Bundle Description
AL164949 Joystick for M-ICV control (floor-mounted)
Code Bundle Description
AL164951Joystick for M-ICV control (floor-mounted); lever with additional switches for 3 diverter valves
6020 Series Tractors-46 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6020 - 6920S,6020SE - 6620SE (not with low profile cab,not for tractors with CommandArm)
Note: for tractors with AutoQuad Plus or PowrQuad Plus transmission
Note: from tractor serial number 398656
Models: cab only: 6020SE - 6420SE(with low profile cab)
Note: from tractor serial number 398656
Models: cab only: 6020SE - 6420SE(with low profile cab)
Note: from tractor serial number 398656
Joysticks for E-ICV control
The shape and size of the Single Lever Controlcorresponds to the anatomy of the operator's hand. Itfeatures two push buttons and one proportional controltoggle switch integrated in the grip to control up to 5functions.An integrated safety guard prevents unintentionalimplement operation. Lever functions are onlytransmitted, if the guard is tilted away by the grippinghand. A toggle switch at the base of the lever allowsfunction to be disengaged when not in use, e.g. fieldwork, transport etc.For optimum forearm ergonomics, lever position canbe adjusted through movement of its base in thehorizontal plane. To permit free entry/access via theright-hand side door, it can further be swivelleddownwards - out of the way.The maximum number of double acting controlvalves in combination with Single Lever Controlincreases to six.
Models: cab only: 6120 - 6920SNote: From tractor serial number 398656 and
depending on the options of the tractor, additional spare parts may be required (see table below).
Note: If diverter valves (for 4th and 5th function) are applied, order additionally 1 x DC51685 (wiring harness).
Code Bundle Description
AL164953Joystick for M-ICV control (floor-mounted); lever with additional switches for 3 diverter valves and gear shifiting
Code Bundle Description
AL164950 Joystick for M-ICV control (floor-mounted)
Code Bundle Description
AL164952Joystick for M-ICV control (floor-mounted); lever with additional switches for 3 diverter valves
Code Bundle Description
AL159344 Joystick for E-ICV control without CommandArm
Bundle Description Remark QTY
AL164526 Wiring harness 6120 - 6920S without CommandArm 1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-47
Models: cab only: 6320 - 6920SNote:From tractor serial number 398656 and
depending on the options of the tractor, additional spare parts may be required (see table below).
Note: If diverter valves (for 4th and 5th function) are applied, order additionally 1 x DC51685 (wiring harness).
2-Post roll guard
Models: without cab: 6020 - 6520, 6215, 6515
Air conditioning systemThe 6020 air conditioning system is powerful enoughto keep a comfortable in-cab temperature, whatever theoutside conditions are. The air conditioning systemuses ozone-friendly R134A refrigerant.
AL157528 Wiring harness6120 - 6620 without CommandArm; not for tractors with TLS-axle
1
AL157527 Wiring harness6820 - 6920S without CommandArm; not for tractors with TLS-axle
1
Code Bundle Description
AL159345 Joystick for E-ICV control with CommandArm
Bundle Description Remark QTY
AL164525 Wiring harness 6320 - 6920S with CommandArm 1
Bundle Description Remark QTY
Code Bundle DescriptionAL119439 2-Post roll guard
6020 Series Tractors-48 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6120 - 6420SNote: Depending on the options of the tractor,
additional spare parts may be required.
Models: cab only: 6520 - 6920SNote: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle DescriptionAL157956 Air conditioning system, 4 cyl.
Bundle Description Remark QTYAL161500 Refrigerant hose 1AL157596 Deflexion roll without air-brakes 1
L111601 drive belt, 2475 mm length without air-brakes 1
L114293 drive belt, 2525 mm length with air-brakes 1
L167673 Console, air conditioning compressor without air-brakes 1
L153258 Coolant hose,top of cooler
without air-brakes; without engine Stage II to 97/68/EC
1
L154872 Coolant hosewithout air-brakes; with engine Stage II to 97/68/EC
1
R128661 Pulley for fan without air-brakes 1
AL112101 Refrigerant hoseReceiver-drier to evaporator, up to tractor serial no. 398790
1
AL158320 Refrigerant hoseEvaporator to compressor, suction side, with air-brakes
1
AL158321 Refrigerant hoseEvaporator to compressor, suction side, without air-brakes
1
AL160536 Refrigerant hose
Evaporator to compressor, suction side, with Stage II engine to 97/68/EC, with air-brakes
1
AL160537 Refrigerant hose
Evaporator to compressor, suction side, with Stage II engine to 97/68/EC, without air-brakes
1
AL162467 R134A receiver-drier Up to tractor serial no. 398790 1
AL163559 R134A receiver-drier From tractor serial no. 398791 1
AL164222 Refrigerant hoseReceiver-drier to evaporator, from tractor serial no. 398791
2
Code Bundle DescriptionAL157957 Air conditioning system, 6 cyl.
Bundle Description Remark QTYAL161500 Refrigerant hose 1
AL157596 Deflexion roll 6520 - 6920S without air-brakes 1
L111600 Drive belt, 2460 mm length
6620 without air-brakes 1
L111601 Drive belt, 2475 mm length
6520 without air-brakes 1
L114293 Drive belt, 2525 mm length 6520 with air-brakes 1
L114468 Drive belt, 2515 mm length 6620 with air-brakes 1
L167673 Console, air-conditioning compressor
6520 - 6920S without air-brakes 1
Bundle Description Remark QTY
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-49
* Existing pulley needs to be replaced when thediameter is different.
L153282 Drive belt, 2505 mm length
6820 - 6920S with air-brakes 1
L155538 Drive belt, 2455 mm length
6820 - 6920S without air-brakes 1
R128659* Pulley for fan 6820 - 6920S 1R128660* Pulley for fan 6620 1
AL112102 Refrigerant hoseReceiver-drier to evaporator, up to tractor serial no. 398790
1
AL160831 Refrigerant hose
Evaporator to compressor, suction side, without air-brakes; 6820 - 6920S
1
AL160830 Refrigerant hoseEvaporator to compressor, suction side, with air-brakes; 6820 - 6920S
1
AL162467 R134A receiver-drier Up to tractor serial no. 398790 1
AL163559 R134A receiver-drier From tractor serial no. 398791 1
AL164222 Refrigerant hoseReceiver-drier to evaporator, from tractor serial no. 398791
2
Bundle Description Remark QTY
6020 Series Tractors-50 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).
Front base weights
Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note:not compatible with Front PTO
Models: 6320 - 6920SNote:not compatible with Front PTO
Quick-tatch weights
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: includes 10 x 50 kg left (L38449)
and 10 x 50 kg right (L38450)
Front weight stop kit
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515
Mounting kits For 8 - 18 quick-tatch weights
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515
Models: 6120 - 6920S, 6120SE - 6520SE, 6515
Code Bundle Description
AL172274 Front weight support, 60 kg(for max. 14 quick-tatch weights)
Code Bundle Description
8771 AL82931 Front weight support, 110 kg(for max. 18 quick-tatch weights)
Code Bundle Description
AL71258 Set of 20 quick-tatch weights, 50 kg each
Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg
Code Bundle Description
AL119967 Mounting parts for 6, 8, 10 quick-tatch weights
Code Bundle Description
AL119968 Mounting parts for 12 & 14 quick-tatch weights
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-51
Models: cab only: 6320 - 6920S
Pick up weight - 900 kgFits on all 6020 Series base weights and Cat. II/III rear3-point hitch or front hitch.
Models: 6320 - 6920SNote: for tractors with MFWD only, cannot be
installed in combination with front weights.
Center link bracketRequired, if pick-up weight is used on the rear or front3-point hitch. Includes two spacer bushings, if 400 kgcentre pick-up weight section only is used in the 3-point hitch.
Models: 6320 - 6920S
Pick up weight - 650 kg
Code Bundle Description
AL82932 Mounting parts for 16 & 18 quick-tatch weights
Code Bundle Description9508 AL112166 Pick up weight, 900 kg
Code Bundle Description
9515 AL113121 Center link bracket for pick up weight (with distance tubes)
6020 Series Tractors-52 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: 6320 - 6920SNote: for tractor with MFWD only; when front
installed front hitch is required.
Horicon weight Package8 x 20 kg front weights with 20 kg carrier attached tothe front of frame behind 50 kg type front weights.
Models: cab only: 6120 - 6920SNote: install only with 90 kg and 110 kg
baseweights.
Front shields
Models: 6520 - 6920S, 6520SE, 6515
Models: 6020 - 6420S, 6020SE - 6420SE, 6215
REAR WHEEL WEIGHTS
Rear wheel weight - 38,5 kgFor steel wheels 30” and bigger on flanges.
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes first set of parts bolted to the rim
(base mounting parts).
Code Bundle Description
AL120009 Pick up weight, 650 kg (concrete weight)
Code Bundle Description9500 AL160627 Horicon weight package, 180 kg
Code Bundle DescriptionAL157298 Front shield
Code Bundle DescriptionAL157299 Front shield
Code Bundle Description
9520 AL119955 Rear wheel weight set, 77 kg (2 x 38,5 kg)
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-53
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes additional set of parts (if base
mounting parts included in AL119955 are installed).
Rear wheel weight - 55 kgFor steel wheels 34” - 38” on flange axles.
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes first set of parts bolted to the rim
(base mounting parts).
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515Note: Includes additional set of parts (if base
mounting parts included in AR56636 are installed).
Code Bundle Description
AR56632 Rear wheel weight set, 77 kg (2 x 38,5 kg)
Code Bundle Description
9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)
Code Bundle Description
AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)
6020 Series Tractors-54 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
5.3 CHASSIS PARTS
Front fendersFor saver high speed road transport and reduced tractorsoiling. Large, full-coverage flexible front fenderswith wide range of adjustments to adapt to thedifferent tread settings to protect the cab from mud anddebris.
Front fenders 2WD tractorsFor safer high speed transport and reduced tractorsoiling.
Models: 6020 - 6420S, 6620, 6020SE - 6420SE, 6215, 6515
Base mounting kit for 4WD front fendersSupporting parts and hardware required if respectivefront fender field kits are ordered.
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515
Front fender for 4WD tractors
Models: 6020 - 6420, 6020SE - 6320SENote: Order additionally: AL71218 mounting kitFor tire sizes:
• 9.5-24, 10.5-18, 11.2-24, 275/80R18
Models: 6020 - 6820, 6020SE - 6520SE, 6215Note: Order additionally: AL71218 mounting kitFor tire sizes :
• 11.2-28, 12.4-24, 12.4-28, 12.5-20, 335/80R20
Code Bundle Description8840 AL79939 2WD front fenders
Code Bundle Description
AL71218 Base mounting kit for MFWD front fender
Code Bundle Description8841 AL71215 MFWD front fender, 310 mm width
Code Bundle Description8841 AL71216 MFWD front fender, 355 mm width
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-55
Models: 6020 - 6920S, 6020SE - 6520SE, 6215, 6515For tire sizes:
• 13.6-24• 13.6-28• 14.5-20• 14.9-20• 14.9-24• 14.9LR20• 360/70R24• 375/75R20• 380/70R24• 380/70R28
Models: 6920, 6920SFor tire sizes:
• 14.9-28• 380/85R28
Models: 6120 - 6420S, 6220SE - 6420SEFor tire sizes:
• 14.9-26• 16.9-24• 420/70R24• 480/65R24
Models: cab only: 6520 - 6920SFor tire sizes:
• 16.9R24• 16.9R26• 16.9R28• 420/70R24• 420/70R28
Models: 6920, 6920SFor tire sizes:
• 16.9-28• 420/70R28• 420/85R28
Models: 6320 - 6420SNote:This Kit is no longer available, please order
individual parts according to parts catalog.For tire sizes:
• 480/65R24• 480/65R28• 540/65R24
Models: 6520 - 6920SFor tire sizes:
• 18.4R26• 480/65R24• 480/70R24• 480/70R26• 480/70R28• 540/65R24• 540/65R26• 540/65R28
Code Bundle Description8841 AL159606 MFWD front fender, 410 mm width
Code Bundle Description8841 AL158554 MFWD front fender, 410 mm width
Code Bundle Description8841 AL111669 MFWD front fender, 470 mm width
Code Bundle Description8841 AL159607 MFWD front fender, 470 mm width
Code Bundle Description8841 AL158552 MFWD front fender, 470 mm width
Code Bundle Description8841 AL70278 MFWD front fender, 520 mm width
Code Bundle Description8841 AL159608 MFWD front fender, 520 mm width
6020 Series Tractors-56 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: 6920, 6920SFor tire sizes:
• 16.9-30• 480/65R28• 480/70R28• 480/70R30• 480/85R30• 540/65R28• 540/65R30
Turnable front fendersA new single arm fender for MFWD axles offers agreater steering angle. It stops at the frame and turnswhile the tires move further until the maximumsteering angle is reached. The turning circle now is thesame as on tractors without fenders.
Models: 6020 - 6520, 6020SE - 6620SENote: for front loader application an additional fender
stop panel AL165335 (4 cyl. tractors) or AL165336 (6 cyl. tractors) has to be ordered separately
For tire sizes:• 11.2R28• 12.4R24• 12.4R28• 280/85R28• 320/85R24• 320/85R28
Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note: for front loader application an additional fender
stop panel AL165335 (4 cyl. tractors) or AL165336 (6 cyl. tractors) has to be ordered separately
Note: not for APL 2060For tire sizes:
• 13.6R24• 13.6R28• 14.9R24• 14.9R28• 340/85R24• 340/85R28• 380/70R24• 380/70R28• 380/85R24• 380/85R28
Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note: for front loader application an additional fender
stop panel AL165335 (4 cyl. tractors) or AL165336 (6 cyl. tractors) has to be ordered separately
Note: not for APL 2060For tire sizes:
• 16.9R24• 16.9R28• 16.9R30• 420/70R24• 420/70R28• 420/85R24• 420/85R28• 420/85R30• 440/65R24
Code Bundle Description8841 AL158553 MFWD front fender, 520 mm width
Code Bundle DescriptionAL164705 Turnable front fender, 355 mm width
Code Bundle DescriptionAL164706 Turnable front fender, 410 mm width
Code Bundle DescriptionAL164707 Turnable front fender, 470 mm width
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-57
Models: 6020 - 6920S, 6020SE - 6620SENote: for front loader application an additional fender
stop panel AL165335 (4 cyl. tractors) or AL165336 (6 cyl. tractors) has to be ordered separately
Note:not for APL 2060For tire sizes:
• 480/65R24• 480/65R28• 480/70R24• 480/70R28• 480/70R30• 540/65R24• 540/65R28• 540/65R30
Fender side extensions
The fender extensions are now a one piece design.They are compatible for use with snow chains on therear wheels, for example for forestry applications.Cover large tires and significantly reduce soiling oftractor and cab.
Models: 6020SE - 6420SE For tire sizes:
• 13.6R38• 16.9R34• 18.4R30• 480/70R34
Models: 6320 - 6420SFor tire sizes:
• 18.4R38
Models: with suspended cab: 6820 - 6920S For tire sizes:
• 460/85R38 • 18.4-38
Models: 6120 - 6420, 6020SE - 6420SEFor tire sizes:
• 13.6R38, 14.9R38, 16.9R34, 480/70R34, 18.4R34(6120, 6220, 6020SE - 6420SE)
• 16.9R38 (6220 - 6420)
• 18.4R34 (6320)
• 14.9R38, 480/70R38 (6320, 6420)
• 18.4R30 (6020SE - 6220SE)
• 480/70R38, 16.9R38 (6220SE - 6420SE)
Code Bundle DescriptionAL164708 Turnable front fender, 520 mm width
Code Bundle DescriptionFender side extension, 110 x 15 mm
AL120094 Mounting parts for fender extensionL151637 Fender extenision, LH, 110 x 15 mmL151743 Fender extenision, RH, 110 x 15 mm
Code Bundle DescriptionFender side extension, 110 x 15 mm
AL120094 Mounting parts for fender extensionL151637 Fender extenision, LH, 110 x 15 mmL151743 Fender extenision, RH, 110 x 15 mmL116670 Splash guard LHL116671 Splash guard RH
Code Bundle DescriptionFender side extension, 110 x 15 mm
AL120094 Mounting parts for fender extensionL151637 Fender extenision, LH, 110 x 15 mmL151743 Fender extenision, RH, 110 x 15 mmL116672 Splash guard LHL116673 Splash guard RH
Code Bundle DescriptionFender side extension, 110 x 60 mm
AL120094 Mounting parts for fender extensionL156328 Fender extenision, LH, 110 x 60 mmL156329 Fender extenision, RH, 110 x 60 mmL116670 Splash guard LHL116671 Splash guard RH
6020 Series Tractors-58 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: 6020SE - 6220SE For tire sizes:
• 16.9R30
Models: 6320 - 6420S with suspended cab, 6520 - 6920S
For tire sizes:• 18.4R38
(6320 6420S with suspended cab)• 16.9R38, 18.4R38, 480/70R38, 520/70R38,
420/85R38, 460/85R38, 540/65R38 (6520)
• 540/65R38 (6520 with suspended cab)
• 18.4R38, 460/85R38, 520/70R38 (6620)
• 18.4R38, 460/85R38(6820, 6920S)
Models: 6320, 6420SFor tire sizes:
• 520/70R38• 600/65R38
Models: 6520 - 6920S with suspended cabFor tire sizes:
• 20.8R38• 520/85R38• 580/70R38• 650/65R38
Models: 6120 - 6420, 6020SE - 6420SEFor tire sizes:
• 520/70R34 (6120 - 6420, 6020SE - 6420SE)• 540/65R38 (6320, 6420)
Models: 6320 - 6420S with suspended cab, 6520 - 6920S
For tire sizes:• 520/70R38
(6320 - 6420S with suspended cab, 6520, 6620)• 540/65R38 (6520)• 600/65R38
(6320 - 6420S with suspended cab, 6520 - 6920S)• 20.8R38, 520/85R38, 650/65R38
(6520 - 6920S)
Code Bundle DescriptionFender side extension, 110 x 60 mm
AL120094 Mounting parts for fender extensionL156328 Fender extenision, LH, 110 x 60 mmL156329 Fender extenision, RH, 110 x 60 mm
Code Bundle DescriptionFender side extension, 110 x 60 mm
AL120094 Mounting parts for fender extensionL156328 Fender extenision, LH, 110 x 60 mmL156329 Fender extenision, RH, 110 x 60 mmL116672 Splash guard LHL116673 Splash guard RH
Code Bundle DescriptionFender side extension, 190 x 20 mm
AL120094 Mounting parts for fender extensionL151638 Fender extenision, LH, 190 x 20 mmL151745 Fender extenision, RH, 190 x 20 mmL116670 Splash guard LHL116671 Splash guard RH
Code Bundle DescriptionFender side extension, 190 x 20 mm
AL120094 Mounting parts for fender extensionL151638 Fender extenision, LH, 190 x 20 mmL151745 Fender extenision, RH, 190 x 20 mmL116672 Splash guard LHL116673 Splash guard RH
Code Bundle DescriptionFender side extension, 190 x 65 mm
AL120094 Mounting parts for fender extensionL156332 Fender extenision, LH, 190 x 65 mmL156333 Fender extenision, RH, 190 x 65 mmL116670 Splash guard LHL116671 Splash guard RH
Code Bundle DescriptionFender side extension, 190 x 65 mm
AL120094 Mounting parts for fender extensionL156332 Fender extenision, LH, 190 x 65 mmL156333 Fender extenision, RH, 190 x 65 mmL116672 Splash guard LHL116673 Splash guard RH
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-59
Fender extensionFor heavy duty work and bad weather conditions JohnDeer offers a mud flap kit for 6020 Series tractors. Themud flap provides an additional protection to avoiddirt on your tractor and following vehicles. It is madeof rugged and flexible rubber, that bears up againstworst application conditions. The kit fits to all 6020Series tractors with a 190 mm width fender extensions.
Models: cab only: 6120 - 6920S, 6020SE - 6620SENote:can only be installed if the tractor already has a
190 x 65 mm or 190 x 20 mm side-extension on its fenders.
Code Bundle DescriptionAL159975 Fender extension
6020 Series Tractors-60 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
5.4 AXLES
Extensions Rear axleRear axle extensions are available to match differenttread settings.
Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note: In combination with rear wheels with bolt circle
measuring 203 mm in dia.Note: Increased tread setting from 1912 mm-1976 mm
Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note: In combination with rear wheels with bolt circle
measuring 203 mm in dia.Note: Increased tread setting from 1916 mm-2004 mm
Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515Note: for 6020 - 6220 order addionally:
1 x L116668 reinforcement ringNote: Increased tread setting from 1912 mm-2138 mm
Front axle
Models: 6020 - 6520, 6020SE - 6520SE, 6215, 6515
Note: In combination with front wheels with bolt circle measuring 275 mm in dia.
Note: Increased tread setting from 2016 mm-2134 mm
Tie-rod extension - front axleFor extension of the track width by 102 mm at eachside (left and right hand).
Models: 6215, 6515Note: with open operator’s station
Code Bundle Description
AL156776 Distance hub, 30 mm, for rear axle extension
Code Bundle Description
AL156779 Distance hub, 44 mm, for rear axle extension
Code Bundle Description
AL156777 Distance hub, 111mm, for rear axle, treadadjusting
Code Bundle Description
AL156778 Distance hub, 60mm, for centering the front wheels
Code Bundle DescriptionAL164291 Tie rod extension, front axle
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-61
Track extension front and rear axleThe extended track and extra-wide vehicle lighting areintended only for 6-cylinder tractors with a 335 mm(13.19 inch) hole-circle diameter on front wheels andwith a 275 mm (10.83 inch) hole-circle diameter onrear wheels.In order to work as efficient as possible, progress inrow planting and the use of wider attachments demandflexible track widths. To meet these demands JohnDeere offers track extensions for 6020 Series 6-cylinder tractor models.With the help of the extended track, it is possible tocover more rows at once and to ride within the rowswithout affecting cultivations or banks. For sprayerapplications the new field installation kits provideanother advantage: the extended track of the tractorallows a superior support and balance adjustment ofthe sprayer.Two different extensions are available:
• Extension 2 x 94 mm provides a track extension to2000 mm. Depending on the overall tractor width,additional lighting kits for extra-wide vehicles areavailable.
• Extension 2 x 219 mm provides a track extensionto 2250 mm. Due to the resultant overall tractorwidth the kit also includes extra-wide vehiclelighting and a warning sign.
Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2550 mm (100.4 inch)Note:Must NOT be installed on tractors with dual
wheelsNote: Important when extending the track of the rear
axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.
Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.
Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2750 mm (108.3 inch)Note:Must NOT be installed on tractors with dual
wheelsNote: Important when extending the track of the rear
axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.
Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.
Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2750 - 3000 mm
(108.3 - 118 inch)Note:Must NOT be installed on tractors with dual
wheels
Code Bundle Description
AL162738 Track extended to 2000 mm(78.74 inch)
Code Bundle Description
AL164385Track extended to 2000 mm(78.74 inch) with extra-wide vehicle lighting
Code Bundle Description
AL162739Track extended to 2250 mm(88.58 inch) with extra-wide vehicle lighting and warning sign
6020 Series Tractors-62 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2750 - 3000 mm
(108.3 - 118 inch)
Models: 6520 - 6920S (cab only), 6620SENote:Maximum overall width of 2750 mm (108.3 inch)
Reinforcement of rear wheelsFor heavy-duty operations in the field, the rear wheels(on flanged rear axle with fine thread) can be re-inforced with this kit.
Models: 6420 - 6920SNote: On tractors not equipped with a second spacer
ring, follwing parts must be ordered in addition:
Code Bundle Description
AL164386 Extra-wide vehicle lighting and warning sign
Code Bundle DescriptionAL169786 Extra-wide vehicle lighting
Code Bundle Description
AL155035 Rear wheel reinforcement for heavy duty operations in the field
Bundle Description Remark QTY
L152520 M20 x 1.5 x 95 cap screw
for tractors with 80 mm long wheel bolts 16
24M7242 Washer for tractors with 80 mm long wheel bolts 16
L150648 M20 x 1.5 x 120 stud for tractors with 105 mm long studs 16
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-63
5.5 BRAKES AND STEERING
Hydraulic trailer brake
The hydraulic trailer brake system gives a powerful,safe braking function. The tractor brake-pedal operatedsystem gives a trailer braking function proportional tothe pressure applied to the pedal.The field kits below permit the tractor to be retro-fittedwith an hydraulic trailer brake.
Models: 6020 - 6620, 6020SE - 6620SENote: Depending on the options of the tractor,
additional spare parts may be required.
Models: 6215, 6515Note:order in addition:
Models: 6820 - 6920Note: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description9350 AL158781 Hydraulic trailer brake
Bundle Description Remark QTY
AL165274Hydraulic trailer brake valve (I = 6)
6320 - 6620 and6320SE - 6620SE with cab and MFWD;
6520, 6620 and6520SE, 6620SE with cab and no MFWD or with 2-post ROPS
1
AL165275 Hydraulic trailer brake valve (I = 9.2)
for UK;
6020 - 6220 and6020SE - 6220SE;
6320, 6420 and6320SE, 6420SE with cab and no MFWD or with 2-post ROPS;
6320 - 6620 MFWD with brake
1
Code Bundle DescriptionAL155105 Hydraulic trailer brake
Bundle Description QTYAL165275 Hydraulic trailer brake valve (I = 9.2) 1
Code Bundle Description9350 AL158782 Hydraulic trailer brake
Bundle Description Remark QTY
AL165274 Hydraulic trailer brake valve (I = 6)
for UK;
with cab and MFWD 1
AL165275 Hydraulic trailer brake valve (I = 9.2)
MFWD with brake for UK;
MFWD with brake1
6020 Series Tractors-64 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Pneumatic trailer brake
The pneumatic trailer brake system consists basicallyof a two line system. This is the same as used today oncommercial vehicles.Pre-braking function:
• short brake pedal travel allows braking of thetrailer without braking the tractor. This feature isrequired to control the trailer and prevent jackknifing.
• A quick release valve opens the trailer brakeimmediately after release of the brake pedal forbetter acceleration.
Single line systems for pneumatic trailer brakes areavailable as well. These kits are supplementary to thedual-line systems, they can not be used stand alone.The dual-line system has to be installed first before thesingle line system should be ordered.The field kits below permit the tractor to be retro-fittedwith a pneumatic trailer brake system.
Models: cab only: 6120 - 6420SNote: Depending on the options of the tractor,
additional spare parts may be required.
Models: cab only: 6520, 6620Note: Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description
9356 AL157141 Pneumatic trailer brake, dual-line system
Bundle Description Remark QTY
AL159976 Trailer brake valve without brakes on front wheels 1
AL151103 Trailer brake valve with brakes on front wheels 1
AL67648 Pressure-limiting valve
with brakes on front wheels 1
L154523 Elbow fitting with brakes on front wheels 1
L80375 Special ring with brakes on front wheels 2
R104558 O-ring with brakes on front wheels 2
14M7492 Nut with brakes on front wheels 2
L156032 Elbow fitting with brakes on front wheels 1
L114290 Poly-V-belt (2385 mm length) without air-conditioning 1
AL157596 Deflection roll without air-conditioning 1
L114293 Poly-V-belt (2525 mm length) with air-conditioning 1
L153010 Refrigerant hose with air-conditioning 1AL161500 Refrigerant hose with air-conditioning 1R113050 O-ring with air-conditioning 1AL158320 Refrigerant hose with air-conditioning 1P50883 O-ring with air-conditioning 1
Code Bundle Description
9356 AL157140 Pneumatic trailer brake, dual-line system
Bundle Description Remark QTY
AL159976 Trailer brake valve without brakes on front wheels 1
AL151103 Trailer brake valve with brakes on front wheels 1
AL67648 Pressure-limiting valve
with brakes on front wheels 1
L154523 Elbow fitting with brakes on front wheels 1
L80375 Special ring with brakes on front wheels 2
R104558 O-ring with brakes on front wheels 2
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-65
Models: cab only: 6020 - 6620Note: This single-line system can only be installed in
connection with dual-line system AL157140 and AL157141.
Note: Depending on the options of the tractor, additional spare parts may be required.
Models: cab only: 6820 - 6920S Note:Depending on the options of the tractor,
additional spare parts may be required.
14M7492 Nut with brakes on front wheels 2
L156032 Elbow fitting with brakes on front wheels 1
L114290 Poly-V-belt (2385 mm length) without air-conditioning 1
AL157596 Deflection roll without air-conditioning 1
L114293 Poly-V-belt (2525 mm length) with air-conditioning 1
AL161500 Refrigerant hose with air-conditioning 1R113050 O-ring with air-conditioning 1R33259 O-ring with air-conditioning 1L114670 O-ring with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1P50883 O-ring with air-conditioning 1
Code Bundle DescriptionAL157144 Pneumatic trailer brake, single-line system
Bundle Description Remark QTY
AL166611 Fuel tank (160 l) 6020 - 6420S if not already equipped 1
L156143 Bracket with suspended cab 1AL79740 Bracket without suspended cab 1
Bundle Description Remark QTYCode Bundle Description9356 AL157142 Pneumatic trailer brake, dual-line system
Bundle Description Remark QTYL101379 Bracket without suspended cab 1AL154881 Pilot line without suspended cab 1AL119370 Linkage without suspended cab 1
AL119371 Linkagewithout suspended cab, but with AutoPowr transmission
1
11M7058 Cotter pin with suspended cab 114M7273 Nut (M8) with suspended cab 219M8008 Screw (M8x35 mm) with suspended cab 224M7055 Washer with suspended cab 3AL37332 Fitting with suspended cab 1AL151104 Bracket with suspended cab 1AL152869 Pilot line with suspended cab 1AL151106 Linkage with suspended cab 1
AL151107 Linkage with suspended cab and AutoPowr transmission 1
AL159976 Trailer brake valve without brakes on front wheels 1
AL151103 Trailer brake valve with brakes on front wheels 1
AL67648 Pressure-limiting valve
with brakes on front wheels 1
L154523 Elbow fitting with brakes on front wheels 1
L80375 Special ring with brakes on front wheels 2
R104558 O-ring with brakes on front wheels 2
14M7492 Nut with brakes on front wheels 2
L101118 Hose with brakes on front wheels 1
L154383 Bracket with brakes on front wheels 1
Z32994 Fitting with brakes on front wheels 2
L64164 Back-up ring with brakes on front wheels 2
L80372 Elbow fitting with brakes on front wheels 1
14M7273 Nut with brakes on front wheels 1
15M7054 Nut with brakes on front wheels 2
19M7324 Screw (M8X75 mm) with brakes on front wheels 2
L153281 Poly-V-belt (2375 mm length) without air-conditioning 1
L153282 Poly-V-belt (2505 mm length) with air-conditioning 1
6020 Series Tractors-66 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6820 - 6920SNote: This single-line system can only be installed in
connection with dual-line system AL157142.Note: Depending on the options of the tractor,
additional spare parts may be required.
Models: 6020SE - 6620SENote:Depending on the options of the tractor,
additional spare parts may be required.
Models: 6020SE - 6620SENote: This bundle can be installed only in conjunction
with dual-line air-brake system AL161651.Note: If your tractor is not equipped with a 160 l fuel
tank, please order such a fuel tank additionally according to the latest parts catalog.
Note: Depending on the options of the tractor, additional spare parts may be required.
Models: cab only: 6120 - 6620, 6020SE - 6620SENote: from tractor serial no. 398656Note: This single-line system can only be installed in
connection with dual-line system.
Models: cab only: 6820 - 6920SNote: from tractor serial no. 398656Note: This single-line system can only be installed in
connection with dual-line system.
AL161500 Refrigerant hose with air-conditioning 1R113050 O-ring with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1P50883 O-ring with air-conditioning 1
Code Bundle Description
AL157145 Pneumatic trailer brake, single-line system
Bundle Description Remark QTYL156143 Bracket with suspended cab 1AL79740 Bracket without suspended cab 1
Code Bundle Description
AL161651 Pneumatic trailer brake, dual-line system
Bundle Description Remark QTY
L155194 Shield for 4 cyl. tractors with air conditioning 1
L114293 Drive beltfor 4 cyl. and 6 cyl. tractors with air conditioning
1
L114290 Drive beltfor 4 cyl. and 6 cyl. tractors without air conditioning
1
R128661 Belt pulleyfor 4 cyl. and 6 cyl. tractors without air conditioning
1
AL157596 Deflection rollfor 4 cyl. and 6 cyl. tractors without air conditioning
1
AL152714 Compressed air hose for 4 cyl. tractors 1
AL152715 Compressed air hose for 6 cyl. tractors 1
L153022 Air intake hose for 4 cyl. tractors 1L153344 Air intake hose for 6 cyl. tractors 1AL155089 Oil return line for 4 cyl. tractors 1AL116422 Oil return line for 6 cyl. tractors 1
AL161173 Refrigerant line for tractorswith air conditioning 1
Bundle Description Remark QTY
Code Bundle Description
AL112178 Pneumatic trailer brake, single-line system
Bundle Description Remark QTYAL79833 Line 1AL79834 Line 1
L101118 Compressedair line
for 6 cyl. tractors, length400 mm (15.7 in) 2
L101118 Compressedair line
for 4 cyl. and 6 cyl. tractors, length 1.500 mm (59.0 in)
1
L101118 Compressedair line
for 4 cyl. and 6 cyl. tractors, length 1.340 mm (52.8 in)
1
Code Bundle Description
AL164723 Pneumatic trailer brake, single-line system
Code Bundle Description
AL164975 Pneumatic trailer brake, single-line system
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-67
Models: cab only: 6820 - 6920SNote: from tractor serial no. 398656Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: cab only: 6820 - 6920SNote: from tractor serial no. 398656Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: cab only: 6520, 6620, 6520SE, 6620SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: cab only: 6520, 6620, 6520SE, 6620SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,
additional spare parts may be required.
Code Bundle Description
AL164976 Pneumatic trailer brake, dual-line system without precharge valve
Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1
L153281 Drive belt, 2375 mm (93.50 inch) without air-conditioning 1
AL161500 Refrigerant hose with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1
L153282 Drive belt, 2505 mm (98.63 inch) with air-conditioning 1
24M7055 Washer 1
L158770 Protective edging 1
19M7513 Cap screw 1
AL160421 Coupling end (brake) for Great Britain only 1
AL160422 Coupling end (supply) for Great Britain only 1
Code Bundle Description
AL164977 Pneumatic trailer brake, dual-line system with precharge valve
Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1
L153281 Drive belt, 2375 mm (93.50 inch) without air-conditioning 1
AL161500 Refrigerant hose with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1
L153282 Drive belt, 2505 mm (98.63 inch) with air-conditioning 1
24M7055 Washer 119M7513 Cap screw 1
L158770 Protective edging 1
L113893 Screw 2
AL160421 Coupling end (brake) for Great Britain only 1
AL160422 Coupling end (supply) for Great Britain only 1
Code Bundle Description
AL164987 Pneumatic trailer brake, dual-line system without precharge valve
Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1
L114290 Drive belt, 2385 mm (93.89 inch) without air-conditioning 1
AL161500 Refrigerant hose with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1
L114293 Drive belt, 2525 mm (99.41 inch) with air-conditioning 1
L114468 Drive belt, 2515 mm (99.01 inch) with air-conidtioning 1
24M7055 Washer 119M7513 Cap screw 1
AL160421 Coupling end (brake) for Great Britain only 1
AL160422 Coupling end (supply) for Great Britain only 1
Code Bundle Description
AL164988 Pneumatic trailer brake, dual-line system with precharge valve
Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1
L114290 Drive belt, 2385 mm (93.89 inch) without air-conditioning 1
AL161500 Refrigerant hose with air-conditioning 1AL160830 Refrigerant hose with air-conditioning 1
L114293 Drive belt, 2525 mm (99.41 inch) with air-conditioning 1
L114468 Drive belt, 2515 mm (99.01 inch) with air-conidtioning 1
24M7055 Washer 119M7513 Cap screw 1L113893 Screw 2
AL160421 Coupling end (brake) for Great Britain only 1
AL160422 Coupling end (supply) for Great Britain only 1
6020 Series Tractors-68 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: cab only: 6120 - 6420S, 6020SE - 6420SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,
additional spare parts may be required.
Models: cab only: 6120 - 6420S, 6020SE - 6420SENote: from tractor serial no. 398656Note:Depending on the options of the tractor,
additional spare parts may be required.
Dampened Shock Valves
Models: 6820 - 6920SNote: up to tractor serial no. 358863
Code Bundle Description
AL164998 Pneumatic trailer brake, dual-line system without precharge valve
Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1
L114290 Drive belt, 2385 mm (93.89 inch) without air-conditioning 1
R128661 Belt pulley without air-conditioning 1AL161500 Refrigerant hose with air-conditioning 1AL158320 Refrigerant hose with air-conditioning 1AL160536 Refrigerant hose with air-conditioning 1
L114293 Drive belt, 2525 mm (99.41 inch) with air-conditioning 1
L153010 Radiator hose with air-conidtioning 124M7055 Washer 119M7513 Cap screw 1
AL160421 Coupling end (brake) for Great Britain only 1
AL160422 Coupling end (supply) for Great Britain only 1
Code Bundle Description
AL164999 Pneumatic trailer brake, dual-line system with precharge valve
Bundle Description Remark QTYAL157596 Deflection roll without air-conditioning 1
L114290 Drive belt, 2385 mm (93.89 inch) without air-conditioning 1
R128661 Belt pulley without air-conditioning 1AL161500 Refrigerant hose with air-conditioning 1AL158320 Refrigerant hose with air-conditioning 1AL160536 Refrigerant hose with air-conditioning 1
L114293 Drive belt, 2525 mm (99.41 inch) with air-conditioning 1
L153010 Radiator hose with air-conidtioning 124M7055 Washer 119M7513 Cap screw 1L113893 Screw 2
AL160421 Coupling end (brake) for Great Britain only 1
AL160422 Coupling end (supply) for Great Britain only 1
Code Bundle Description
AL157038 Field kit for attenuated shock valves in the steering system
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-69
Accumulator
Models: 6020 - 6920SNote:only for tractors without hydraulic cab
suspension
Models: 6020 - 6920SNote:only for tractors with hydraulic cab suspension
Code Bundle Description
AL169778 Field kit accumulator withmounting parts
Code Bundle Description
AL169779 Field kit accumulator withmounting parts
6020 Series Tractors-70 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
5.6 STORAGE Tool box
An external detachable and lockable tool box withconvenient carrying handle is located in front of thecab. It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.
Models: cab only: 6120 - 6920S, 6020SE - 6420SE
Additional storage container - 45l
With a capacity of 45 l and a 45 kg maximum payload thisnew sheet metal storage container offers additional space,e.g. for rubber boots, oil cans, bulky tools, grease guns etc.Equipped with 2 handles at the side it can easily be carried.With the help of the included quick lock pin the containercan be closed rapidly.
The fastening on the back allows a quick installation to allexisting front weights: base weights, front weights and the900 kg pick up weight.
Models: 6020 - 6920S, 6020SE - 6620SE, 6215, 6515Note: 45 kg maximal payload; only for front installation:
attachable to base weights, front weights and 900 kg pick up weight.
Code Bundle Description
8850 AL156255 Sheet metal tool box, mounted to main frame, right hand side
Code Bundle DescriptionAL120005 Storage container, 45 l
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-71
5.7 HITCHES AND ASSOCIATED EQUIPMENT
Tool barsFor light weight cat. II implements attached to the toolbar, 3 different versions are available:
• Tool bar for links with ball ends • Tool bar for links with hook ends • Tool bar for links with hook ends - extended length
Models: 6120 - 6920S, 6020 SE - 6420SENote: For hook-type, cat. II lower links, complete
with stabilizer bracket (without ball guides).
Release cablesFor upper and lower link hooks including hardware(screws, clamps, holder etc.)
Models: 6120 - 6920S, 6020SE - 6420SE
Remote control of trailer hitches
Models: cab only: 6120 - 6420S
Models: cab only: 6120 - 6420S
Code Bundle Description
9476 AL81951 Tool bar for links with hook ends, cat. II (standard)
Code Bundle Description
AL81619 Cables for controlling the center link and draft links
Code Bundle Description
AL158725 Remote control of height-adjustable trailer hitches
Code Bundle DescriptionAL158726 Remote control of rigid trailer hitches
6020 Series Tractors-72 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Stabilizer bar “Economy” For use only with cat. II and cat. III flat bar draft links.These provide manual adjustment of lateral hitchmovement.
Models: 6120 - 6620, 6020SE - 6520SE, 6215, 6515
Models: 6820 - 6920S
Stabilizer barsFor adjustable lateral sway control and adjustableautomatic locking at a preselected height.
Models: 6120 - 6620
Automatic stabilizer barsAutomatic stabilzer bars offer for the respectiveimplements the possiblity to have:
• lateral sway over a self defined lower range and nosway above, or
• no sway over the whole range
Models: 6820 - 6920S
Stabilizer chains with sway control blocksFor almost universal implement control.
Code Bundle DescriptionAL117961 Stabilizer bar “Economy”
Code Bundle DescriptionAL151119 Stabilizer bar “Economy”
Code Bundle DescriptionAL171016 Stabilizer bar, right hand and left hand
Code Bundle Description
AL159255 Automatic stabilizer bars, left hand and right hand
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-73
Models: cab only: 6120 - 6620
Note: for tractors with telescopic lift link or flat steel lift link order in addition:
Swinging drawbar
Drawbars are adjustable in length and the swingingfeature can also be locked out.
Models: 6020 - 6620, 6020SE - 6520SE, 6215, 6515
Models: 6820 - 6920SNote: not used with Powrshift transmission
Code Bundle DescriptionAL80849 Stabilizer chains
Bundle Description QTYL79378 Console for cat. II or cat. III 219M7489 Screw M16x45 for cat. II 419M7409 Screw M16x50 for cat. III 4
Code Bundle Description9441 AL80054 Swinging drawbar with hammer strap
Code Bundle Description
9441 AL81349 Swinging drawbar with hammer strap, includes swinging drawbar L115073
6020 Series Tractors-74 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: 6820 - 6920SNote: used with Powrshift transmission
Guide Ball HolderTo store the guide balls for hook type 3 point hitch andtop link quick couplers just where they are needed.
Models: 6020 - 6920S, 6020SE - 6620SENote: for all tractors without pneumatic trailer brake Note: for tractors with pneumatic trailer brake from
tractor serial no. 398656
Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch.John Deere now offers the solution - the hitch holderfor the upper wagon hitch. The holder is a convenientsolution that can easily be mounted within minutesonto all kinds of front weights with coupling recess.The wagon hitch can easily be affixed and is stored ina convenient height you can reach without stooping.The holder is adjusted with two fixing screws thatagain can be adjusted in two widths depending on theweight the holder has been mounted onto.
Models: 6020 - 6920S, 6020SE - 6620SE
Code Bundle Description
AL119419 Swinging drawbar, includes swinging drawbar AL151017
Code Bundle Description9463 AL161925 Guide Ball Holder
Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-75
Load control shaft, support
Models: 6820 - 6920SNote: without receiving pins on main frameNote: up to serial no. XXXXXX
Models: 6820 - 6920SNote: from serial no. XXXXXX
John Deere Pick Up HitchThe John Deere Pick-up Hitch provides one-manhitching with excellent visibility. The hitch can behydraulically adjusted in length and height forcoupling trailers or trailed implements, even underdifficult working conditions like uneven ground, verylow placed trailers, etc.Two different coupling devices are available:
• hook type is in base • drawbar can be ordered optional
Either of the two items can be stored in a framemounted universal holder
.
Models: 6020 - 6620, 6020SE - 6520SENote:order in addition:
1 x L112143 from tractor serial no. 192965
Code Bundle DescriptionAL156675 Load control shaft support
Code Bundle DescriptionAL160835 Load control shaft support
Code Bundle DescriptionAL118022 JD pick up hitch with hook
6020 Series Tractors-76 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Models: 6820 - 6920SNote:order in addition:
1 x L112143 from tractor serial no. 192965
Electro-hydraulic control of pick-up hitch
Models: 6320 - 6620Note: only for tractors with CommandArmNote: please order in addition:
Models: 6820 - 6920SNote: only for tractors with CommandArmNote: please order in addition:
Code Bundle DescriptionAL159072 JD pick up hitch with hook
Code Bundle Description
AL164328 Field kit for electro-hydraulic control of pick-up hitch
Bundle Description QTY38H5015 Elbow fitting 1AL163534 Endplate 1AL156366 Shuttle valve 1L155798 Console 1L153588 Flanged screw 2
Code Bundle Description
AL164326 Field kit for electro-hydraulic control of pick-up hitch
Bundle Description QTY38H5015 Elbow fitting 2AL163534 Endplate 1AL156366 Shuttle valve 1AL156849 Oil line 1L156614 M10 special screw 138H5215 T-fitting 1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-77
Wagon hitches
Models: 6020 - 6920S, 6020SE - 6620SE
Models: 6020 - 6920S, 6020SE - 6620SE
Models: 6020 - 6920S, 6020SE - 6620SE
Models: 6020 - 6920S, 6020SE - 6620SE
Drawbar
Models: cab only: 6120 - 6920S, 6020SE - 6520SE
Yoke for draft link supportHinged to the left and right hand side rear axle, itprotects the draft sensor pins from shock loads underextreme draft work.
Models: 6320
Code Bundle Description9419 AL163693 Wagon hitch piton fix
Code Bundle DescriptionAL163696 Hitch insert, piton fix type
Code Bundle Description9405 AL163694 Wagon hitch ball type
Code Bundle DescriptionAL163697 Hitch insert, ball type
Code Bundle Description
9447 AL157346 Drawbar with storage for JD pick up hitch
Code Bundle DescriptionAL78129 Yoke for draft link support
6020 Series Tractors-78 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
5.8 VANDALISM PROTECTION KITS
Models: 6020 - 6620, 6020SE - 6520SE, 6215, 6515
Models: 6020 - 6420S, 6020SE - 6420SE, 6215
Models: 6520 - 6920S, 6520SE, 6515
Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit provides individualsecurity by individual keys for all equipment keptinside the cab. The kit comes with four keys, in case ofdamage or loss a blank key can be ordered.
Models: cab only: 6120 - 6920S, 6020SE - 6620SENote: if needed please order in addition:
Code Bundle Description
AL110170 Field kit, latch for oil filler neck, transmission - vandalism protection
Code Bundle DescriptionAL158987 Vandalism protection
Code Bundle DescriptionAL158988 Vandalism protection
Code Bundle DescriptionAL71345 Security door lock kit
Bundle Description QTYAL71350 Blank key 1
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-79
Lockable fuel tank cap
Models: 6020 - 6920S, 6515, 6020SE - 6420SE, 6620SE
Code Bundle DescriptionAL113087 Lockable fuel tank cap
6020 Series Tractors-80 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 02-2006 ( RI, RII)
Numerical Index
Bundle No. Page Bundle No. PageAL70278 55 AL119439 47AL71215 54 AL119955 52AL71216 54 AL119956 53AL71218 54 AL119964 50AL71258 50 AL119967 50AL71345 78 AL119968 50AL77028 13 AL120005 70AL77680 14 AL120009 52AL78129 77 AL151119 72AL79915 30 AL151224 37AL79939 54 AL151508 25AL80054 73 AL153668 42AL80126 37 AL153672 38AL80127 37 AL154352 34AL80849 73 AL154354 34AL81349 73 AL155035 62AL81619 71 AL155105 63AL81951 71 AL155363 35AL82290 16 AL155846 1AL82931 50 AL155847 2AL82932 50 AL155848 2AL110170 78 AL155850 2AL111669 55 AL155851 2AL112070 42 AL155852 2AL112166 51 AL156243 24AL112178 66 AL156255 70AL112428 15 AL156675 75AL113087 79 AL156731 42AL113121 51 AL156776 60AL114321 36 AL156777 60AL114856 37 AL156778 60AL115672 44 AL156779 60AL115884 44 AL156832 40AL116589 45 AL157038 68AL116924 44 AL157055 6AL117254 35 AL157090 41AL117366 35 AL157091 41AL117478 35 AL157097 28AL117734 36 AL157099 29AL117838 18 AL157140 64AL117961 72 AL157141 64AL118022 75 AL157142 65AL118241 24 AL157144 65AL118486 15 AL157145 66AL119283 35 AL157191 38AL119292 36 AL157233 5AL119419 74 AL157237 7
Bundle No. Page Bundle No. PageAL157238 7 AL160627 52AL157298 52 AL160639 1AL157299 52 AL160640 2AL157346 77 AL160641 2AL157569 34 AL160642 3AL157620 41 AL160643 2AL157956 48 AL160644 2AL157957 48 AL160648 3AL158486 40 AL160649 4AL158487 40 AL160650 3AL158520 24 AL160651 4AL158552 55 AL160652 3AL158553 56 AL160653 4AL158554 55 AL160654 3AL158725 71 AL160655 4AL158726 71 AL160799 32AL158762 44 AL160835 75AL158767 39 AL161122 28AL158781 63 AL161125 28AL158782 63 AL161617 30AL158785 32 AL161618 30AL158792 25 AL161651 66AL158831 14 AL161895 30AL158981 22 AL161897 30AL158987 78 AL161912 27AL158988 78 AL161913 27AL159072 76 AL161925 74AL159255 72 AL162171 6AL159273 17 AL162172 5AL159275 18 AL162357 38AL159296 19 AL162432 6AL159297 20 AL162433 5AL159314 28 AL162434 7AL159344 46 AL162450 19AL159345 47 AL162738 61AL159352 29 AL162739 61AL159374 25 AL162899 39AL159606 55 AL163214 7AL159607 55 AL163513 24AL159608 55 AL163533 13AL159939 24 AL163534 13AL159975 59 AL163693 77AL160215 26 AL163694 77AL160216 26 AL163696 77AL160217 27 AL163697 77AL160218 27 AL163826 42AL160414 14 AL163978 22
Issue 02-2006 ( RI, RII) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6020 Series Tractors-81
Numerical Index
Bundle No. Page Bundle No. PageAL163979 22 AL168015 43AL163980 22 AL169778 69AL164159 33 AL169779 69AL164161 33 AL169786 62AL164291 60 AL169787 9AL164326 76 AL169788 9AL164328 76 AL169789 10AL164385 61 AL169790 10AL164386 62 AL169791 11AL164673 43 AL169792 12AL164705 56 AL169965 15AL164706 56 AL169971 21AL164707 56 AL170031 20AL164708 57 AL171016 72AL164712 19 AL171027 13AL164723 66 AL171054 32AL164947 45 AL171055 32AL164948 45 AL172073 31AL164949 45 AL172274 50AL164950 46 AL172666 23AL164951 45 AR56632 53AL164952 46 AR56636 53AL164953 46 EC300182 16AL164975 66 RE509677 27AL164976 67 RE519696 27AL164977 67AL164987 67AL164988 67AL164998 68AL164999 68AL165335 56AL165336 56AL165650 74