Post on 03-Apr-2018
transcript
7/28/2019 7 Photoshop efficiency tips n using effects.docx
1/12
7 Photoshop efficiency tips
Photoshop is an immense application, packed full of so many features that almost no one will ever discoverthem all, or how to use them to their full potential. With so many features also comes a bunch of shortcuts and
hotkeys, which are often hidden away in documentation, and in my experience, most people only use things
recommended by other people, or things they find by accident.
So here are the shortcuts and various bits of trickery I use literally every single day in Photoshop, to make life
just a little bit less painful. Some may seem so simple that everyone should know THAT one, but thats notthe case. If even 10 people find something new here that helps their workflow, then my mission has been
accomplished.
1. Quick tool switching
These are obvious, but the tool hotkeys I use all the time are:
(M) Marquee Selection SHIFT+(M) to change marquee type (V) Move tool (T) Type tool (G) Gradient/Bucket Fill tool SHIFT+(G) to switch between Gradients and Bucket Fill (B) Brush tool SHIFT+(B) to change brush type (E) for the Eraser tool.
If you use vector shapes a lot (which I dont), then you probably want to memorise the vector tools hotkeys too.
2. Moving around the canvasGetting to where you need to be is easier when you hold SPACE, and click and drag. Combined with the Zoom
tool (Z) and the ability to zoom back to 100% size with CTRL+ALT+0 (+ALT+0), youll rarely need to useanything else.
Apple magic mouse users can also scroll in all directions with a single finger, but if you own one you probably
know, as it can be pretty sensitive to accidental touches also.
3. Visual Layer Selection
7/28/2019 7 Photoshop efficiency tips n using effects.docx
2/12
Im terrible at naming and grouping my layers. It slows me down, and as quite a visual person, the layers palate
with its tiny thumbnails often doesnt help me find what I need, in order to select it. So to quickly select alayer, or select multiple layers to move or group, I use visual layer selection.
For this to work, you need to select the Move Tool (V), and then up the top, check the Auto Select: box, andthen select Layer from the dropdown, and then uncheck the box again. If you dont do this, the behaviour
will select groups instead of layers inside groups, which can be frustrating. (you only need to do this step once)
With the Move tool selected (V), CTRL+CLICK(+CLICK) on a layer on the stage to select it. Hold downSHIFT as well to select multiple layers, or click and drag to select all layers your drag selection touches.
This method does not work for layers with very low opacity. To select layers like this, RIGHT CLICKon
them, and the list that appears will show all layers that your cursor is currently hovering over.
Its also worth noting that when selecting tiny layers, the single white stroke around the edge of the move cursor
is *not* the point that you should be aiming for, instead its the first black pixel on the tip of the arrow. If in
doubt, zoom.
4. Quick Duplication
If you ever need to duplicate a layer (or multiple) to move somewhere else on the canvas, simply select thelayer using the method described above (though any selection method will work), and hold ALT while clicking
and dragging the layer. It will drag out a duplicate, leaving your original where it was. I use this all the time
for creating multiple tabs or menu items, paragraphs of text, headings, boxes, pretty much everything.
Note: The duplicated layer will appear above the topmost selected layer in your layers palate, so if you like to
keep your layers grouped and named nicely, youll have to move and name them manually to keep everythingin order. (this is also one of the reasons I dont bother in my initial designs).
5. Quick Colour Selection
The 2 keys that will help you manage your colours a bit faster, are (D) which resets the foreground and
background colours to black and white respectively, and (X) which swaps the foreground and background
colour positions. Say you wanted to quickly apply a white fill to something, youd simply hit (D), (X) and thenapply your fill.
6. Quick (and useful) Fills
The 2 fills I use most often have slightly different behaviours.
The first is just a standard area fill. Pressing ALT+BACKSPACE will fill the whole of your layer with your
foreground colour. If you have a text layer selected, it will change the text colour, and if you have a marquee
selection of some form, it will fill the whole of the selected area (if the layer type allows this, does not work on
vector shapes). This is again useful with the quick colour selection hotkeys above. (D), ALT+BACKSPACEwill fill your layer with solid black.
The second, and slightly more useful fill type, fills the area while maintaining transparency. What this means is
say you have a complex clearcut shape, and you wanted to make the whole shape black without messing around
with selections or channels, you would press ALT+SHIFT+BACKSPACE, and youd see the shape be
7/28/2019 7 Photoshop efficiency tips n using effects.docx
3/12
completely filled with your foreground colour, while maintaining the transparency level of each pixel. An
example is shown below:
This is an excellent way to retain nice antialiasing on your shapes. It also works with marquee selections, and
will fill the non-transparent area within the selection.
To be honest I have no idea how to do this using Photoshops menus, as Ive always used hotkeys, but Im surethere is a way (maybe someone could let us know in the comments.
7. Selection from layer
Selecting the opaque area of any particular layer is a useful thing to be able to do quickly. In the layers palate,
hold CTRL () and click the thumbnail image of a layer. You should notice that this creates a selection aroundthe edges of that layer, and also preserves the alpha channel of the original layer. The uses of this are too
numerous to list, but Im sure youll find many by yourself.
7/28/2019 7 Photoshop efficiency tips n using effects.docx
4/12
Watercolor Text Painted on a Wet Paper
this effect with different color schemes or underlying papers. Perhaps scrapbooking fans will consider this
effect for their hybrid scrapbooking projects. The image below shows the final effect:
Watercolor Text Effect
Open a new 450px by 250px document with white background. Create a new layer and paint it with white.Choose theHorizontal Type Mask Tooland before starting to type, choose the font you want to use. In this case
we will be usingBrush Scriptfont with a font size of 200px. Click on the blank document and type the wordBlue.
VisitMyFonts.comfor some other cool brush style fonts.
Go to SELECT >> FEATHERand set it to 5px. The feather shouldnt be too large, the font must remain
readable, but dont set it too small because the effect wont be noticeable.
http://www.myfonts.com/search?search%5btext%5d=brushhttp://www.myfonts.com/search?search%5btext%5d=brushhttp://www.myfonts.com/search?search%5btext%5d=brushhttp://www.myfonts.com/search?search%5btext%5d=brush7/28/2019 7 Photoshop efficiency tips n using effects.docx
5/12
Now set Foreground color: #0000CA andBackground color: #E300B6. You can use any color you like, but for
some reasons, the effect can be quite different according to the colors you choose. When you finish this tutorial,try another colors to see what you get.
Go toFILTER >> RENDER >> CLOUDS. After that, go to SELECT >> DESELECTto remove the selection.
After removing the selection (very important!), go toFILTER >> ARTISTIC >> WATERCOLOR and enter the
following values:Brush detail: 1Shadow intensity: 0Texture: 1. Click OK to apply the filter.
Wet Paper Background
So far the watercolor text effect looks great, but why not make it even better? Copy the paper background imagebelow and paste it into the watercolor text effect document. This texture is part of myHigh Resolution PaperBackgrounds Collection.
http://www.photoshoproadmap.com/links/go/2183http://www.photoshoproadmap.com/links/go/2183http://www.photoshoproadmap.com/links/go/2183http://www.photoshoproadmap.com/links/go/2183http://www.photoshoproadmap.com/links/go/2183http://www.photoshoproadmap.com/links/go/21837/28/2019 7 Photoshop efficiency tips n using effects.docx
6/12
Move the layer below the TYPElayer and name itPAPER. After that, select the TYPElayer and set the
Blending mode toMultiply.
So far the image should look like this:
Select thePAPER layer and click on theAdd new layericon on theLayers palette. Name the new layer as
BUMP. Select the Paint Brush tooland create a brush tip ofMaster diameter90px andHardness 0.
7/28/2019 7 Photoshop efficiency tips n using effects.docx
7/12
Paint some thick strokes on theBUMPSlayer. In the next step, these strokes will become the bumps in thepaper. The checker box pattern is just the layer transparency.
With theBUMPSlayer still selected, set the LAYER FILL to 0% and chooseBevel and emboss from theLayerStylespop up menu. Use the settings shown in the image below.
7/28/2019 7 Photoshop efficiency tips n using effects.docx
8/12
At this stage, the image should look like the one below:
But the effect is not quite ready. To have a complete illusion of paper relief we will have to add some shadows
to "raise" the paper a bit. Set theBackground colorto white. Go toIMAGE >> CANVAS SIZEand set the widthto 500px and the heightto 300px. This will add a thick white border all around the image.
7/28/2019 7 Photoshop efficiency tips n using effects.docx
9/12
The next step is adding a very subtle drop shadow to the paper. Select thePAPER layer and selectDrop shadow
from theLayer styles popup menu. Use the settings shown in the following image.
Take a look at the image below and you will see that although the light comes from the top left, the shadow can
be seen on all four sides, being the right and bottom sides the most noticeable.This is done by setting a shadowsize (8 pixels in this case) larger than the shadow displacement or distance (2 pixels in this case). I often use this
technique to make the shading more soft.
7/28/2019 7 Photoshop efficiency tips n using effects.docx
10/12
Believe it or not, we are not still there! There is a last touch of magic. Select thePaint brush tool and create a
90px brush tip like the one mentioned earlier in this tutorial. Set theForeground colorto black. Select the
Backgroundlayer and make a single click with the brush near the the edge of the paper. Try different positionsof the brush tip to create deeper or lighter shadows. Check the image below to see how it works:
Now make some other clicks in different spots until you believe the paper looks the way you want. The image
below shows the final result of this tutorial:
7/28/2019 7 Photoshop efficiency tips n using effects.docx
11/12
Paper folds and creasesThis tutorial you have just finished reading, and hopefully managed to get the same results, can be combinedwith another tutorial I wrote last year:Creating Paper Folds and Creases. Combining both tutorials you cancreate something like this image:
http://www.photoshoproadmap.com/Photoshop-blog/2006/10/03/creating-paper-folds-and-creases/http://www.photoshoproadmap.com/Photoshop-blog/2006/10/03/creating-paper-folds-and-creases/http://www.photoshoproadmap.com/Photoshop-blog/2006/10/03/creating-paper-folds-and-creases/http://www.photoshoproadmap.com/Photoshop-blog/2006/10/03/creating-paper-folds-and-creases/7/28/2019 7 Photoshop efficiency tips n using effects.docx
12/12
In this case, I used Color Burn instead ofMultiply as the text and drops layer blending. There are so manysettings in these two tutorials that you should play with them. Start with following the instructions as strictly as
you can. Once you get the same results, you can start playing with the settings to achieve different results.