A Free Safety Offer From RugerDo you own an “Old Model” (pre-1973) Ruger Single-Six, Blackhawk,

Super Blackhawk, or Bearcat single action revolver like these?

The patented Ruger Conversion Kit is anentirely new operating system for theserevolvers. It can help prevent accidentaldischarges caused by a drop or blow to thehammer if the user has failed to take thebasic safety precaution of keeping thehammer down on an empty chamber.That’s very important!

This mechanism can be factory-installedwithout any further alteration. The frameand other major parts will not be affectedby this Conversion. The value of the gunwill not be impaired, and we will returnyour original parts for collector’s purposes.

To receive a FREE factory safetyConversion, write to us at Sturm, Rugerand Company, Inc., Dept. KC, 411Sunapee Street, Newport, NH 03773. Wewill provide you with a shipping containerand instructions. You only pay initialshipping to our factory. We will cover allother charges including return shippingcosts. Please write to us without delay ifyou have one of these guns, and tell yourfriends about the availability of this kit.Remember that the safest way to carry anyolder single-action revolver, regardless ofmanufacturer, is with the hammer down onan empty chamber.

If your revolver has the words “NewModel,” “Bisley,” or “Vaquero” on theframe, this offer is not applicable. Pleasewrite to us at:

Sturm, Ruger & Company, Inc.Department KC411 Sunapee StreetNewport, NH 03773

for full details and a FREE shipping box.

Three frame screws identify the “old model”Single-Six, Blackhawk, and Super Blackhawkmade from 1953 to 1972.

Serial numbers below 93-00000 identify oldBearcat and Super Bearcat models made from1958 to 1972.

Arms Makers for Responsible Citizens®

FREE instruction manuals for all Rugerfirearms are available online at www.ruger.com