Post on 04-Oct-2020
transcript
About a company
2
ZaslavlEnergo LLC was founded in 2009 as an enterprise for the supply of
components for the power industry of the Republic of Belarus.
In 2010, the company opened manufacturing line of products for the
power engineering of the Republic of Belarus. Coordinated teamwork,
continual improvement, competent technical staff. These qualities allowed
ZaslavlEnergo to produce products of plastics, rubber products, metal
products, and silicone products. One of the main products of polyamide
(plastics) is the cable clamps. More than 1 000 000 cable clamps were
sold in the Republic of Belarus.
In 2014, the Company began delivery of the cable clamps on the markets
in neighboring countries. Primarily this is the Russian Federation,
Kazakhstan and Ukraine.
zaslavlenergo.by / cable clamps ZE
zaslavlenergo.by / cable clamps ZE
About a company
3
In 2016, ZaslavlEnergo opened a new direction for the production of the
cable shelves, racks, cable trays made of fiberglass.
Due to high quality of product and prompt delivery, ZaslavlEnergo has
established itself as a reliable and rapid supplier for companies such as:
Belenergo, Belaruskali, Belarusneft, NAFTAN, Mozyr Oil Refinery and
many others ...
Necessity of application cable clamps
zaslavlenergo.by / cable clamps ZE 4
Installation the cables with XLPE insulation must be carried out with a rigid
type of fixing from non-magnetic material. The cable is subject to dynamic
loading. If the cable is properly secured with a cable clamp, damage to the
sheath and cable insulation is excluded.
zaslavlenergo.by / cable clamps ZE
Fiberglass Reinforced Polyamide
5
Fiberglass Reinforced Polyamide is a composite material made of a
polymer matrix reinforced with fibers. It features increased strength,
resistance to impact loads, chemical inertness, which makes it oil and
petrol resistant.
zaslavlenergo.by / cable clamps ZE
Main advantages of cable clamp from fiberglass before metallic
6
NON CONDUCTING
Low electrical conductivity and
heat conduction. Products
electrostatically safe,
does not require earthing.
RESISTANCE TO ENVIRONMENT
Resistant to oils, fats, frost, heat,
UV, ozone, salts, moisture, acids,
aggressive chemicals and nuclear
radiation.
DURABILITY
The increase in performance and
resistance to environment
provides a long service life.
SECURITY
Simplicity of installation and
absence of sharp corners allows to
reduce the probability of damage to
the shell and insulation of the cable
to zero.
NON MAGNETIZING
As a consequence, the absence
of induced currents in a closed
metal circuit.
zaslavlenergo.by / cable clamps ZE 7
Cable clamps produced by
ZaslavlEnergo are designed
to fix, retain and support
cables. In case of short-
circuit faults, correct
clamping will keep the
cables in place during the
fault and enable the circuit
to be restored once the fault
has been repaired.
About a cable clamps
zaslavlenergo.by / cable clamps ZE 8
Our cable clamps are
made for fixing of all types
one cable (single- and
multi-conductor cables) as
well as cable clamps for
triangle formation of single-
core cables. They are also
fit for tubes and hydraulic
pipes.
About a cable clamps
zaslavlenergo.by / cable clamps ZE 9
The range of the ZaslavlEnergo
cable clamps goes from Ø 1x20
mm up to 3x120 mm.
Cable clamps are produced from
high-quality virgin raw polyamide,
fiberglass-reinforced material. The
material is environmentally friendly
and is recyclable.
Also ZaslavlEnergo is ready to
make cable clamps and other
products (from polyamide,
reinforced with fiberglass),
according to the clients
specification.
About a cable clamps
zaslavlenergo.by / cable clamps ZE
Types of cable clamps produced by ZaslavlEnergo
10
CABLE CLAMPS FOR FIXING OF THE
SINGLE-CORE CABLES AND MULTI-CORE CABLES
TypeOuter diameter of
cable
ZE 1х25-40 from 25 to 40 mm
Mechanical resistance to
dynamic loads – 6 000 N «GOST 11262 Plastics. Tensile tests method.»,
analog DIN EN ISO 527:2012, ASTM D638.
TypeOuter diameter of
cable
ZE 1х25-45 from 25 to 45 mm
ZE 1х45-70 from 45 to 70 mm
ZE 1х65-95 from 65 to 95 mm
Mechanical resistance to
dynamic loads - 15 000 N. «GOST 11262 Plastics. Tensile tests method.»,
analog DIN EN ISO 527:2012, ASTM D638.
* If necessary, the strength of products can be increased by 30 - 40%
zaslavlenergo.by / cable clamps ZE 11
Mechanical resistance to
dynamic loads - 10 000 N.«GOST 11262 Plastics. Tensile tests method.»,
analog DIN EN ISO 527:2012, ASTM D638.
Mechanical resistance to
dynamic loads - 20 000 N.«GOST 11262 Plastics. Tensile tests method.»,
analog DIN EN ISO 527:2012, ASTM D638.
CABLE CLAMPS FOR FORMATION
TRIANGLE OF THE SINGLE-CORE CABLES
Types of cable clamps produced by ZaslavlEnergo
TypeOuter diameter of
cable
ZE 3х20-30 from 20 to 30 mm
ZE 3х30-45 from 30 to 45 mm
TypeOuter diameter of
cable
ZE 3х40-60 from 40 to 60 mm
ZE 3х50-75 from 40 to 75 mm
ZE 3х75-100 from 75 to 100 mm
* If necessary, the strength of products can be increased by 30 - 40%
zaslavlenergo.by / cable clamps ZE
Cable clamps for fixing of the single-core cables
12
The product has been designed so that with the maximum cable diameters
for this type of fastenings, the upper and lower parts are in constant
engagement, which reduces bending loads on the fastening element and
thereby increases the overall strength of the entire structure to mechanical
loads when short-circuit currents occur.
ZE 1
zaslavlenergo.by / cable clamps ZE
Cable clamps for fixing of the single-core cables
13
ZE 1
Type L mm A mm Dmin mm Dmax mm D*min mm D*max mm D**min mm D**max mm d mm H mm H1 mm H2 mm H3 mm B mm Weight g.
ZE 1х25-40 88 58 25 40 19 34 13 28 11 45 45 61 20 58 90
ZE 1х25-45 91 68 25 45 19 39 13 33 11 48 48 68 31 58 140
ZE 1х45-70 124,5 95 45 70 39 64 33 58 12 66 66 82 32 58 210
ZE 1х65-95 165 120 65 95 59 89 53 83 12,5 95 95 120 42 68 470
ZE* 1х90-115 170 150 90 115 84 109 78 103 17 128 132 157 56 68 550
ZE* 1х115-140 222 175 115 140 109 134 103 128 17 160 164 194 72 68 620
D*min, D*max - maximum and minimum cable diameters when using one
silicone gasket.
D**min, D**max - maximum and minimum cable diameters when using two
silicone gaskets.
* - the production time of the first batch from the moment of ordering: 3 months
Types of cable clamps
14
ZE 1
Fixation of the cables and absorption of forces due to the weight of the cables
in vertical sections at any height.
Cable clamps ZE 1 can be used for fixing the cable bundle.
zaslavlenergo.by / cable clamps ZE
ZE 1х90-115 ZE 1х65-95 ZE 1х45-70 ZE 1х25-45 ZE 1х25-40
zaslavlenergo.by / cable clamps ZE
Cable clamps for formation triangle
of the single-core cables
15
ZE 3
• The mechanical strength of the cable clamp allows fastening it to the
support surface with a single bolt of the clamp. The second bolt is
used only to connect the cover to the base of the clamp.
zaslavlenergo.by / cable clamps ZE 16
Cable clamps for formation triangle
of the single-core cablesZE 3
Type L mm A mm Dmin mm Dmax mm D*min mm D*max mm D**min mm D**max mm d mm H mm H1 mm H2 mm H3 mm B mm Weight g.
ZE 3х20-30 98 68 20 30 18 28 15 25 11 48 48 68 31 58 140
ZE 3х30-45 160 120 30 45 28 43 25 40 13 87,5 88 107 42 68 245
ZE 3х40-60 187 150 40 60 58 73 34 54 13 107 114 150 48 65 320
ZE 3х50-75 237 190 60 75 38 58 44 69 16 154 156 195 50 81 1081
ZE 3х75-100 284 240 75 100 73 98 69 94 17 208 208 260 79 81 1532
ZE* 3х100-120 348 288 100 120 98 118 94 114 20 261 263 304 93 112 2323
D*min, D*max - maximum and minimum cable diameters when using one
silicone gasket.
D**min, D**max - maximum and minimum cable diameters when using two
silicone gaskets.
* - the production time of the first batch from the moment of ordering: 3 months
Types of cable clamps
17
ZE 3
A series of clamps ZE 3x25-45 can be used including for laying single, multicore
cable diameter from 60 to 85 mm or a bundle of cables.
zaslavlenergo.by / cable clamps ZE
ZE 3х75-100 ZE 3х50-75 ZE 3х40-60 ZE 3х30-45 ZE 3х20-30
zaslavlenergo.by / cable clamps ZE
Elastic gasket
18
Applying
Padding of cables for elastic
compression of diameter variations
to avoid damaging of cables
caused by changes of load and
ambient temperature. Determined
by design. Usually used for cables
with a diameter of more than 60
mm.
CEG
Material
Gasket are made of silicone
rubber (silicone).
Consumption
Ordered in meters, taking into
account the material consumption for
each cable clamp
1х60-90 0.2 m/pcs 3х25-40 0.2 m/pcs
1х90-115 0.3 m/pcs 3х50-75 0.35 m/pcs
1х115-140 0.4 m/pcs 3х75-100 0.45 m/pcs
3х100-120 0.55 m/pcs
Width of the gasket: 80 mm
Thickness of the gasket: 6 mm
Height of the ribs of the gasket: 2 mm
Interphase spacers
19
Applying
Interphase spacers is applied as
necessary, as determined by design
institutes, when laying cables in a
triangle.
IS
Material
Spacers are made of rubber.
zaslavlenergo.by / cable clamps ZE
zaslavlenergo.by / cable clamps ZE
Our projects
20
For a 5-year history of
cooperation, over 180,000
meters of cable has been
securely fixed with our cable
clamps.
MOZYR OIL REFINERY
JSC Mozyr Oil Refinery
Produces a wide range of
petroleum products. High quality,
satisfying the requirements of
national and foreign standards.
zaslavlenergo.by / cable clamps ZE
Our projects
21
The constant modernization and
commissioning of new facilities in
the city of Minsk affects the
extensive cable network of the city
of Minsk for a voltage of 10 -110 kV.
At the same time, the reliability of
the power supply of the capital is a
priority task of the Minsk cable
networks.
The Minsk Metro
The reliable operation of cable lines
in this process is helped by our
products.
Cable clamps of our production, ZE
3х75-100, are applied when laying a
110 kV cable in a triangle.
zaslavlenergo.by / cable clamps ZE
Certificates and tests
22
All our products have been certified and meet the world quality
standards
Voluntary certification of conformity
zaslavlenergo.by / cable clamps ZE
Certificates and tests
23
All our products have been certified and meet the world quality
standards
Testing in accordance with «GOST 11262 Plastics. Tensile tests method.»,
analog DIN EN ISO 527:2012, ASTM D638.