Post on 04-Apr-2018
transcript
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
1/34
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9
Technical
Stainless Steel and Mild Steel Enclosures
SX
WW.CABLEJOINTS.CO.UK
THORNE & DERRICK UKTEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WW.THORNEANDDERRICK.CO.UK
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
2/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
8
The SX range comprises 14 sizes of enclosuremanufactured in either mild steel or stainlesssteel. 11 sizes are available in depths of 140 or200mm and 8 sizes are available in depths of140, 200 or 300mm. The majority of the range
can be fitted with removable gland plates onany or all of the four sides. The mild steelversion (MSX) is available with a number ofpaint options (most RAL colours are available)and anti-corrosion finishes. Further advice onsurface finishes can be sought from theABTECH sales office.
The stainless steel range (SSX) ismanufactured in 316 grade stainless steel togive the maximum environmental protection.The main body is manufactured from 2mmthick sheet and the mounting straps andgland plates from 3mm thick plate. Cableentries can be drilled in the enclosure door or
sides or through the gland plates, if fitted.Entries may also be drilled through the rearface of the enclosure (EExe versions also.)
Another important feature of the SX range isthe hinged, lift-off door, which is held to theenclosure by at least 4 captive stainless steelscrews, which also maintain the correctcompression on the gasket. The hinges aresolid block, machined oversize to enable thescrews to control the closing of the door, not
the hinge, its only function being to support thedoor when opened. The hinges allow easyremoval of the door with only minimal openingrequired before removal (less than 10).
Earthing is accomplished by means of anInternal / external earth stud fitted as standardwhich can be connected to the terminalmounting rail or component mounting plate.Optionally, earth studs can be fitted to
the door and gland plates. Rail mountedearth terminals or proprietary earth bars canbe fitted inside the enclosure and ABTECHSales staff will be happy to advise on this.When fitted with a standard neoprenegasket, the enclosure is suitable for ambienttemperatures of - 40C to + 80C. Alternatively,when fitted with an optional silicone gasket thetemperature range is increased to - 70C to to+ 130C.
The SX range of enclosures are suitable foruse in hazardous areas and can be suppliedwith a number of certificates. ATEX EExe toBS EN 50019 (Zone 1 & 2) EExnA to BSEN50021 (Zone 2) and NEMA 4X (CSA, UL &FM class 1, div 2) and GOST.
The SX range can be supplied fitted with any
component approved terminal to apparatuslevel or can be supplied empty as componentapproved for the clients own certificationrequirements.
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
3/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
9
SX Range Features
Wide Operating Temperature(- 70C to + 130C)
Ingress Protection up to IP68
Fire Resistant to IEC331
Impact Resistant > 10 Nm
Corrosion Resistant
Gland plates can be fitted to any or allfour sides (size SX0 and above)
Certification for use in Zone 1 and 2
UL, CSA, ATEX and GOST Approvals
Ideal for Petrochemical and Marineapplications
Other applications include junction boxes, bothindustrial and hazardous area, OEMapplications, fire protection systems, tunnelwiring, IP68 applications, etc.
The SX range was specifically designed tomeet the rigours of the North Sea environmentand is capable of achieving IP66 and IP67. Ithas also undergone and passed the Shell/ERAdeluge test which was devised to adequately
test enclosures and electrical equipment whichis routinely subjected to ships deck conditionsor fire deluge systems.
IP68 enclosures are also available for depthsup to 120 ft to special order. Furtherinformation on submersible enclosures isavailable in Section 8 of this catalogue.
The SX range has many features which lend
itself to a wide variety applications, not least ofwhich is the ability to be constructed to almostany dimension due to its fabricated nature. Thiscan also be applied to EExe enclosureswhere the certification allows oversizeenclosures to be manufactured whilst retainingthe next smallest sized enclosures powerrating.
The SX range is also suitable for fire resistanceapplications and when fitted with ceramicterminals meets the requirements of IEC 331
(750C for 3 hours) and also BS6387/1983(950C for 3 hours). Further details areavailable in Section 6 of this catalogue.
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
4/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
0
Accessories and Options
The following table is a list of the available accessories suitable for particular standard sizes of SXenclosures. Care should be taken when ordering accessories for use with enclosures intended forhazardous areas to ensure that compliance with certification is retained.
PartNumber(seenote1)
Width(mm)(seenote2)
Height(mm)(seenote2)
Depth(mm)(seenote2)
140mmDepth
200mmDepth
300mmDepth
GlandPlates
(onanyorallfoursides)
EPElectro-polishedexternal
surfaces(SXrangeonly)
LB-LabelBracketWeldedto
Door
ES-EarthStudfittedtoDoor
andGlandPlates
EB-InternalEarthingBar
SIL-SiliconeGasket
(seenote3)
BD-BreatherDrain
(seenote4)
TP-TamperProofLidFixing
Screws
MP-ComponentMounting
Plate(Steel/StainlessSteel)
RFRFIProtection
(seenote5)
SX45 114 114 51 8 8 8 8 9 9 8 8 9 9 9 9 9
SX64 102 152 63 8 8 8 8 9 9 8 8 9 9 9 9 9
SX66 152 152 102 8 8 8 9 9 9 9 9 9 9 9 9 9
SX0 152 229 - 9 9 8 9 9 9 9 9 9 9 9 9 9
SX0.5 184 274 - 9 9 8 9 9 9 9 9 9 9 9 9 9
SX1 234 324 - 9 9 8 9 9 9 9 9 9 9 9 9 9
SX1.5 306 306 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX2 372 324 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX3 372 448 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX4 372 510 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX5 510 510 - 9 9 9 9 9 9 9 9 99
9
9
9
SX6 510 780 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX7 650 950 - 9 9 9 9 9 9 9 9 9 9 9 9 9
SX8 800 1250 - 9 9 9 9 9 9 9 9 9 9 9 9 9
1. The range is available either in stainless steel 316 (SX variants) or mild steel (MSX variants).2. Manufacturing tolerances are +/- 3mm on overall dimensions and +/-0.5mm on f ixing hole centres.3. Silicone gasket increases temperature rating (-70 to +130 C) and may increase working life in some applications.4. Breather drain available in IP66 stainless steel or plastic.5. Radio Frequency Interference (RFI) gasket may reduce IP rating.
Ordering Example;
SX1.5 300 4GP LB EB(Stainless Steel SX1.5 300mm deep, 4 gland plates, label bracket on door and internal earthing bar)
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
5/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
11
Full width, full height Gland Plates
(can be fitted to any or all sides)
Earth Stud fitted to door and gland plates
Label Bracket(welded to door)
Electro-polished(external surfaces on SX range only)
Internal Earthing bar(can be fitted with clamps)
Component Mounting Plate(steel or stainless steel 316)
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
6/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
2
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX45
/SSX45Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
7/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
13
114mm
114mm
51mm
Mildsteel
Stainlesssteel316(1.4404)
1200g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&Zone
2)
FM-AExe(Class1Zone1&Zone2)
GOST-RExe(Zone1&Zone2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
8.0W
MSX
45/SSX45Specificatio
ns
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
1 8 0 7 7 0 0 0 0 0 8 0 7 4 1 1 1 1
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
7 7 5 4 3 0 0 9 9 7 4 3 0
Termin
alPopulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
SideB-D
4 2 2 0 0
SideA-C
4 2 2 0 0
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
SX45Photo
114x5
1mm
114x5
1mm
DrillingEnvelo
pe
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
8/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
4
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX64
/SSX64Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
9/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
15
SideB-D
8 4 3 2 0
SideA-C
6 3 2 1 0
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
102x6
3mm
152x6
3mm
DrillingEnvelo
pe
SideA-C
SideB-D
102mm
152mm
63mm
Mildsteel
Stainlesssteel316(1.4404)
1500g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone
2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
10.258W
MSX
64/SSX64Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
1 18 0 1
515 0 0 0 0 0 1
815
15 9 3 2 3 2
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
15
15
11 9 0 0 0 1
717
15 9 7 0
TerminalPopulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N
*Caremustbetakento
ensurethatthesizeofthis
enclosurecanaccommodatethecablebendingradius.
SX64Photo
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
10/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
6
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX66
/SSX66Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
11/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
17
SideB-D
14 8 6 3 2
SideA-C
14 8 6 3 2
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
152x1
02mm
152x102mm
DrillingEnvelo
pe
SideA-C
SideB-D
.
152mm
152mm
102mm
Mildsteel
Stainlesssteel316(1.4404)
2200g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
14.287W
MSX
66/SSX66Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
1 18
18
15
15
15
11
10 7 0 1
815
16
10 3 2 3 2
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
15
15
11 9 7 6 0 1
717
14 9 7 6
Termin
alPopulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35*
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N*
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
SX66Photo
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
12/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
8
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX0/SSX0Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
13/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
19
SX0Photo
SideB-D
9 6 3 2 2
SideA-C
5 3 2 1 1
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
200mmdeep
4000g
152mm
229mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
2200g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&Zone2)
FM-AExe(Class1Zone1&Zone2)
GOST-RExe(Zone1&Zone2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
19.874W
MS
X0/SSX0Specification
s
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
1 24
24
20
20
20
15
12 0 0 2
420
21
12 4 3 4 3
Wago
280-992
280-999
281-691
281-992
281-993
282-691*
284-691*
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
21
19
16
12
10 7 5 2
525
21
12
10 8
Termin
alPopulations
MaximumNumberofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35*
SAK70*
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N*
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
87x75mm(4xgp140)
144x75mm
(4xgp140)
DrillingEnvelope
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
14/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
0
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX0.5/SSX0.5Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
15/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
21
SX0.5Phot
o
SideB-D
12 8 4 3 2
SideA-C
7 4 2 2 1
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
200mmdeep
6000g
184mm
274mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
5000g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
19.874W
MSX
0.5/SSX0.5Specificatio
ns
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
2 31
31
27
27
27
21
16
28 0 3
127
56
32
12 8 1
2 8
Wago
280-992
280-999
281-691
281-992
281-993
282-691*
284-691*
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
56
52
42
34
14
10 7 6
868
56
34
14
11
Termin
alPopulations
MaximumNumberofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35*
SAK70*
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N*
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
119x75mm
(4xgp140)
189x75mm
(4xgp140)
DrillingEnvelope
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
16/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
2
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX1/SSX1Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
17/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
23
SideB-D
14
10 6 4 3
SideA-C
10 7 4 2 2
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
200mmd
eep
7200g
234mm
324mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
6300g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
29.206W
MSX1/SSX1Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
2 41
41
34
34
34
27
21
18
12
41
34
72
42
14
10
14
10
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691*
283-691*
285-691*
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
72
66
54
44
18
14
10
86
86
72
44
18
14
Termin
alPopulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35*
SAK70*
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N*
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
SX1Photo
169x75mm(4xgp140)
239x75mm(4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
18/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
4
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX1.5/SSX1.5Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
19/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
25
SX1.5Photo
SideB-D
12
10 5 3 3
SideA-C
14
10 6 4 3
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
241x75mm(4xgp140)
221x75mm(
4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
200mmd
eep
8800g
306mm
306mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
7300g
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
32.284W
MSX1.5/SSX1.5Specificatio
ns
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
3 74
74
64
64
64
48
38
32
11
74
64
99
60
21
15
21
15
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691*
283-691*
285-691*
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
99
93
75
60
34
24
20
1
20
1
20
99
60
34
26
Termin
alPopulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35*
SAK70*
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N*
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
20/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
6
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX2/SSX2Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
21/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
27
SideB-D
14
10 6 4 3
SideA-C
18
14 7 5 4
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
200mmd
eep
11.3Kg
372mm
324mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
9.5Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
36.500W
MSX2/SSX2Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
3150
150
126
126
84
99
78
44
30
150
126
132
78
27
18
27
18
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691*
283-691*
285-691*
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
1
32
1
23
99
78
66
42
24
1
56
1
56
1
32
78
66
54
Termin
alPo
ulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10
SAK16
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N
UK16N
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
SX2Photo
307x75mm(4xgp140)
239x75mm(4xgp140)
DrillingEnvelope
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
22/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
8
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX3/SSX3Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
23/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
29
SX3Photo
SideB-D
20
16 9 6 5
SideA-C
18
14 7 5 4
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
307x75mm(4xgp140)
363x75mm(4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
200mmd
eep
13.3Kg
372mm
448mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
11.3Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
42.289W
MSX3/SSX3Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
3189
189
162
162
108
126
99
56
38
189
162
168
99
36
24
36
24
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691*
283-691*
285-691*
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
1
68
1
56
1
26
1
02
84
63
45
2
01
2
01
1
68
1
02
84
69
Termin
alPo
ulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10*
SAK16*
SAK35*
SAK70*
Phoenix
UK2.5N
UK3N
UK5N
UK10N*
UK16N*
UK35N*
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
24/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
0
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX4
/SSX4Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
25/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
31
SX4Photo
SideB-D
24
20
10 7 6
SideA-C
18
14 7 5 4
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
307x75mm(4xgp140)
425x75mm(4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
200mmdeep
14.8Kg
372mm
510mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
12.7Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&Zone2)
FM-AExe(Class1Zone1&Zone2)
GOST-RExe(Zone1&Zone2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
44.726W
MS
X4/SSX4Specification
s
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
3222
222
189
189
126
147
117
66
44
222
189
198
117
42
30
42
30
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
198
183
150
120
99
75
54
237
237
198
102
99
81
Termin
alPo
ulations
MaximumNumberofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10
SAK16
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N
UK16N
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
26/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
2
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX5/SSX5Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
27/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
33
SX5Photo
SideB-D
24
20
10 7 6
SideA-C
26
20
10 7 6
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
200mmd
eep
20.0Kg
510mm
510mm
140mmor200mm
Mildsteel
Stainlesssteel316(1.4404)
140mmdeep
17.0Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
50.328W
MSX5/SSX5Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
4296
296
252
252
189
196
156
99
66
296
252
264
156
56
40
56
40
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
2
64
2
44
2
00
1
60
1
32
1
00
72
3
16
3
16
2
64
1
60
1
32
1
08
Termin
alPo
ulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10
SAK16
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N
UK16N
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendinradius.
445x75mm(4xgp140)
425x75mm(4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
28/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
4
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX6/SSX6Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
29/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
35
SX6Photo
SideB-D
40
34
18
11 9
SideA-C
26
20
11 7 6
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
300mm
32.0Kg
200mm
27.0Kg
510mm
780mm
140mmor200mmor300mm
Mildsteel
Stainlesssteel316(1.4404)
140mm
24.0Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone2)
FM-AExe(Class1Zone1&
Zone2)
GOST-RExe(Zone1&Zone
2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
57.383W
MSX6/SSX6Specifications
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
4496
496
424
424
318
328
264
165
114
496
424
440
264
92
64
92
64
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
4
40
4
04
3
32
2
64
2
20
1
68
1
20
5
24
5
24
4
40
2
64
2
29
1
76
Termin
alPo
ulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10
SAK16
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N
UK16N
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
445x75mm(4xgp140)
695x75mm(4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
30/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
6
Allbluedimensionsinmm,allgreendimensio
nsindecimalinches(drawingnottoscale)
MSX7/SSX7Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
31/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
37
SideB-D
81
60
39
28
16
SideA-C
34
28
13
10 8
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
300mm
52.0Kg
200mm
39.0Kg
650mm
950mm
140mmor200mmor300mm
Mildsteel
Stainlesssteel316(1.4404)
140mm
35.0Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone
2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&
Zone
2)
FM-AExe(Class1Zone1&Zone2)
GOST-RExe(Zone1&Zone2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
68.000W
MSX7/SSX7Specification
s
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
5775
775
660
660
528
510
410
272
188
775
660
685
410
145
100
145
100
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
6
85
6
35
5
20
4
15
3
45
2
60
1
50
8
20
8
20
6
85
4
15
3
45
2
80
Termin
alPo
ulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10
SAK16
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N
UK16N
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
SX7Photo
585x75mm(4xgp140)
865x75mm(4xgp140)
DrillingEnvelo
pe
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
32/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
8
Allbluedimens
ionsinmm,allgreendimensionsindecimalinches(drawin
gnottoscale)
MSX8/SSX8Drawing
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
33/34
Stainless Steel and Mild Steel Enclosures
1
SXRange
2B
PGRange
3BPG
ARange
4ZAGRange
5HighVoltage
6F
ireRated
7Z
PRange
8
Specials
9Technica
l
SX
39
SX8Photo
SideB-D
66
58
30
20
17
SideA-C
42
36
18
12
10
EntryMatrix
EntrySize
M16
M20
M25
M32
M40
300mm
59.0Kg
200mm
52.0Kg
800mm
1250mm
140mmor200mmor300mm
Mildsteel
Stainlesssteel316(1.4404)
140mm
40.0Kg
66or67
-40to80C
(standardneoprenegasket)
-70to130C
(siliconegasket)
ATEXEExe(Zone1&Zone2)
BSEN60079-7
ATEXEExnA(Zone2)
BSEN60079-15
ATEXEExnR(Zone2)
BSEN60079-15
CSA-Exe(Class1Zone1&Zone
2)
FM-AExe(Class1Zone1&Zone2)
GOST-RExe(Zone1&Zone2)
NEMA
4X
(CSA,UL&FM)
(class1division2)
119.462W
MS
X8/SSX8Specification
s
Width
Length
Depth
Material
Weight
IPRating
Temperature
Certification
PowerRating
5775
775
660
660
528
510
410
272
188
775
660
685
410
145
100
145
100
Wago
280-992
280-999
281-691
281-992
281-993
282-691
284-691
283-691
285-691
280-998
281-998
264-120
264-220
264-132(2)
264-134(4)
262-132(2)
262-134(4)
1
295
6
35
5
20
4
15
3
45
2
60
1
50
8
20
8
20
6
85
4
15
3
45
2
80
Termin
alPo
ulations
MaximumNumbe
rofRows
Weidmuller
SAK2.5
SAK4
SAK6
SAK10
SAK16
SAK35
SAK70
Phoenix
UK2.5N
UK3N
UK5N
UK10N
UK16N
UK35N
*Caremustbetakentoensurethatthesizeofthis
enclosurecanaccomm
odatethecablebendingradius.
735x7
5mm
1165x
75mm
DrillingEnvelope
SideA-C
SideB-D
7/29/2019 Abtech Stainless Steel and Mild Steel Electrical Enclosures Abtech SX
34/34
Stainless Steel and Mild Steel Enclosures
SXRange
SX
WW.CABLEJOINTS.CO.UK
THORNE & DERRICK UKTEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WW.THORNEANDDERRICK.CO.UK