Post on 02-Apr-2020
transcript
Air Gap Electromagnetic PowerElectric Loading
Air gap power
Torque
Rotor
Torque is proportional to the rotor volume.
Motor Speed Selection
Torque
Speed
Torque
Speed
Same Power
HighStartingTorque Low
StartingTorque
Motor I Motor II
Larger Volume Smaller Volume
• Torque is proportional to current ( T= k I ).• Since max. current loading is utilized, higher current implies larger volume.
Under the same power condition, high speed motor has smaller volume.
Reduction Gear
Voltage limits
Voltage Limits versus Speeds
q-axis
d-axis
Current limit
Voltage limits
x x
x
Speedincrease
x
q-axis
d-axis
Current limit
x
(a) (b)
Voltage Limit
Power
Speed
-if
Voltage limits
max
q-axisCurrent limit
d-axis
Power
Speed
-if
Voltage limits q-axis
Current limit
d-axis
Power
Speed
-if
Voltage limits q-axis
Current limit
d-axis
(a) (b) (c)
Power Profile Depending on Ld Is and m
Combination of Control Methods
Max. power
3200rpm
7600rpm
10200rpm20000rpm C
Max. torque/flux
MTPA
Current limit
=2600rpmA
B
O
=8Nm
=4Nm
Example Motor