Post on 30-Jul-2018
transcript
Accident Avoidance from HIT-NOT ®
Precise
Visual
and
Audible
Alarms
Simplifying Safety
Detect
Protect
Putting Proven Tech‐
HIT-NOT®‘s Proximity
Warning System Eliminates
STRUCK-BY Accidents
Originally developed for use in underground coal mines, this technology has been
adapted and upgraded to essentially eliminate STRUCK-BY accidents
in the forklift industry.
HIT-NOT®‘s System generates a low frequency adjustable oval-shaped Magnetic
Field, and when the PAD-Personal Alarm Device-which is worn by personnel enters
any of the HIT-NOT® Safety Zones, both an accurate Audible and a Visual Warning
are given to your personnel as well as to the Fork Lift Operator, alerting both of the
potential danger.
flexi‐ ble
May Reduce Insurance Premiums
Reduces the potential for Workman’s
Compensation Claims
This System’s Use Has Been Made
Mandatory by Fortune 500 Companies
Works on Moving Mobile Equipment
Vehicle-to-Vehicle Warning System Available
Improves Safety Awareness
Silent Zones are available for Safe areas
near Forklift Paths
Not to Scale, for illustrative purposes only
PAD Types
The PAD—Personal Alarm Device with an accurate Visual and Audible
Alarm is available in several configurations including:
Safety Vest Pocket
Arm Band
Velcro Attachment
Hard Hat Mounted
Simplifying Safety
CUSTOM SOLUTIONS
Our Proximity Warning Safety
Specialists customize each system
to provide the Optimum warning
coverage for your facility.
Hit‐Not® Magnetic Field Generator
SILENT ZONES
Silent Zones are used to create areas
where the warnings emitted by the
Personal and Vehicle Alarm Devices
are ignored. Silent Zones are standard
on the vehicle for the Operator but
can also be installed in locations
where personnel are protected by
walls and guard rails. Personnel in
Offices and Machine Areas will not be
distracted by the warning signals as
vehicles drive by. Silent Zones can be
Oval in shape up to 22 feet in diameter
or Linear up to 250’ in length.
Not to Scale, for illustrative purposes only
z
Typical Silent Zone Locations
Cab of Forklift
Safe Areas Protected by Guard Rails
Offices with vehicle paths nearby
Personnel Work Areas
Simplifying Safety
Silent
Zone
Field
Generator
HIT‐NOT® Magnetic Field Generator
Offices, Personnel Work Areas or Machine Areas
HIT‐NOT® Proximity Detection Systems virtually eliminate
STRUCK-BY Accidents. The Patented HIT‐NOT® System
provides a very precise and very reliable system which is not
prone to the false alarms or nuisance alarms which occur
with RFID systems.
The key to the system is the Personal Alarm Device or PAD
which is worn by personnel and vehicle Operators on either
a vest, shirt or hard hat. The PAD gives both Audible and
Visual LED Warnings when you are threatened. It also
transmits a signal to the vehicle, to let the Operator know
you are in danger. Both alarms will help to avoid a collision.
There is no limit to the number of Forklifts, Personnel
Carriers, AGVs, other vehicles or PADs which can be used at
one time.
By essentially eliminating STRUCK-BY Accidents in your
facilities, you improve the efficiency of your entire
Company.
Simplifying Safety
Frederick Energy Products, LLC Sales Office 1787 Jeff Road
Huntsville, AL 35806
Jimmy Helms Sales and Marketing Director
Cell 256‐571‐5024 Sales Office 256‐489‐7671
Factory Office 256-489-6915 Fax 256‐489‐6916
jimmyhelms@hitnot.com