Post on 27-Oct-2015
description
transcript
HERE YOU CAN FIND YOURMULTITALENT.
One agria. Many possibilities!
WITH GREATLOTTERY.
AU
TU
MN
/WIN
TER
201
2.
Hoeing
Lottery on the backside
Wood management
Verticutters/Combined equip-ment mowing
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
Dr. h. c. Heinrich Lübke, at that time Federal Minister for Food, Agriculture and Forestry screws the last screw on the 100 000th agria machine himself, assisted by Mr. Erwin Mächtel
History
2 3
EXPERIENCE, TRADITION AND PROGRESS
The agria success story
Erwin Mächtel founded the Möckmühl Machine Factory with his partner and Technical Director, Dr. Ing. Otto Göhler. In 1945 they managed together to re-locate the pre-war production line and material of the Karlsruhe gears factory to the neighbouring town of Ruchsen.
Commencement of the companyIn the beginning not a lot of materials were available. The scarce resources were all the more precious. A few trained staff , some selected machines from the former gear factory and a piece of land with fruit trees to operate from. Soon two sheds were erected to allow the production to begin. But neither aircraft parts nor engines were being produced. Toy cars and pipes were being made from the remains of material rescued: phenol resin. The fi rst products then became hand drills, tin closers and poppy seed grinders. Even aluminium left over from aircraft propellers and bearings were being put to civil use.
The � rst power hoe is bornThe requirements and demand of the market (especially of many vine growers in the neighbourhood) encourage Messrs. Mächtel and Göhler to produce their fi rst powerhoe, a project which carried the name Möckmühl around the world. In many ways the name agria is now synonymous with powerhoe! The agria powerhoe! In 1946/47 the fi rst prototypes of a non-wheeled powerhoe were being constructed with restriction on availa-ble metal and rather venturesome test conditions. Soon the wheeled version followed. The specialisation into the manu-facturing of machines and attachments for the agriculture and forestry clearly emerged.
The beginning of a success storyThe fi rst agria power hoe was created but how can you proceed without money and materials? Time was in favour of agria. The introduction of the German Mark in 1948 and the Marshall Plan improved substantially the economic circumstances.The post-war economic miracle took its course. In 1948 the 100th machine was made in Möckmühl. In 1958 the 100 000th machine was unveiled at the German Agricultural Fair and the then Minister and later Federal President Dr. Lübke congratulated Erwin Mächtel. Today agria looks back its 1 000 000th machine with pride.
65 years agriaToday the Agria-Werke GmbH is one of the leading companies for the manufacturing and sales of machines for soil and green land cultivation as well as maintenance of grounds and paths for the industrial-professional and the private range.
Machines up to 22 HP are built in recently modernised buildings, at four assembly lines and two assembly places. After 65 years of know-how and experience the name agria stands for progress, quality and service.
Uncompromising commitment for qualityThe 1.000.000th agria left the assembly line a long time ago. Back then as well as today the principle of best quality applies in conjunction with the indispensable will for maximum perfor-mance for the benefi t of our customers.
Best QualityOur quality management system takes care that the high quality standards are complied with. This creates the frame for conti-nuous improvement and fulfi lment of customer requests and requirements. Long-time users but also continuously growing number of collectors and fan clubs appreciate this quality.
Security and innovation includedSafety is top priority when developing and manufacturing our products. The best possible ease of use, the optimum functio-nality and the effi cient handling are for us the benchmark with which we gladly compete.
Customer-friendly serviceagria takes service very seriously. An agria machine is accom-panied all through its life by authorised specialist dealers close to you and eff ective agria customer service. Trained experts and immediately available spare parts complete the package of total service.
Spare Partsagria-spare parts are available at all times at our specialist dealers‘.
One agria. Many possibilities.
agria 3400 with snow thrower
agria 2200 in usewith aweeper
UNIVERSAL IMPLEMENT
3600 Two-wheeled tractors
UNIVERSAL IMPLEMENT
2200Two-wheeled tractors
Rotavators
Rotavator (only agria 3600)• operation width: 35, 40, 50 and 60 cm
Ploughing
Quarter plough(only agria 3600)Recommendation: weights
Ridging
ridger (only agria 3600)Necessary: Implement couplingRecommendation: weights
SOILCULTIVATION
Mulching
Heavy duty rotary mower • operation width: 65 cm• with knife break• 2-stage cutting height adjustment 40 and 55 mm• adjustable sliding skidsOptions: branch defl ector, fl ywheel
Flail mulcher (only agria 2200) • operation width: 65 cm• Y-Knives• cuts and chops material up to a diameter of 20 mm• cutting height stepless adjustment by front guide wheels
Mowing
universal cutter bar• working width: 117 cm
Municipal cutter bar• working width: 117 cm
Finger cutter bar• working width: 125 cm
Band rake
Band rake (only agria 3600)• operation width: 120 cm
GREEN LANDAPPLICATIONS
Weed removal
Weed brush• operation width: 50 cm• Height adjustable by front wheel• adjustable and removable splash guardOptional with: brushes right aligned; brushes with fl at steel, right aligned
Snow removal
Snow dozer• operation width: 100 cmNecessary: weightsOptions: plastic wear strip,snow chains
Snow Blowing
snow thrower• operation width: 60 cm• 2-stage
Spreading
Spreader• spreading width: 0.6 up to 4.0 m• adjustable infi nitely• 75 l capacity container
Sweeping
Front mounted sweeper• agria 3600: working widths 80 and 100 cm• agria 2200: working widths 100 and 120 cm• roll diameter: 35 cm• pivoting• height adjustment stepless• working tools: brushes optionally fi ne or coarseOptions: collector bin
Combined sweeping
combined front mounted sweeper• agria 3600: working widths 90 and 100 cm• agria 2200: working width 100 cm• roll diameter: 37 cm• quick change axle mounted oscillating• pivoting• adjustment of depth infi nitely by spindles• working tools: brushes optionally fi ne or coarseOptions: refuse collector bin, splash guard, mounted gully brush, water sprinkler
MAINTENANCEOF GROUNDS AND PATHS
steering clutch brakes on single wheels makes turning of the machine especially easy (only 3600 323)
all-year application by comprehensive range of implements
“comfortable operation guaranteed”
“the small hydrostat for the use by caretakers and service providers”
agria 3600 agria 3600 agria 2200 Hydro
Article number 3600 073 3600 323 2200 021
Fuel petrol petrol petrol
Engine Robin EH 17 Robin EH 17 Robin EX 27
Power 4 kW (6 DIN-HP) 4 kW (6 DIN-HP) 6,6 kW (9 SAE-HP)
Starter hand launching hand launching hand launching
Gearbox pinion shift gearbox4-shifts, 2F/2B
pinion shift gearbox5-shifts, 3F/2B
infi nitely hydrostat drive gear
Steering – single wheel steering single wheel steering
Speeds F: 1.3 and 2.4 km/hB: 2.1 and 3.6 km/h
F: 1.3; 2.4 and 7.0 km/hB: 2.1 and 3.6 km/h
F: 0-7 km/hB: 0-3 km/h
Weight about 55 kg(without wheels)
about 60 kg(without wheels)
about 105 kg (including wheels)
TECHNICAL DATA
compact and easy construction provides agility and allows applica-tion also in crowded and impracticable grounds
can be used as favourable universal implement all the year and for multi-purpose
Image agria 3600 073
Image agria 2200 021
Hexagon wheel shaft is low-wear and safely transmits the power
power take-off switches off in reverse gear and reduces accident risk
quick coupling system for change of implements without tools
compact stepless adjustment of speed by rotary handle (0 – 7 km/h forward, 0 – 3 km/h backward)
very agile and easy operation by single wheel steering
user friendly and operation without exhaustion is possible by vibration-cushioned guiding bar
guiding bar adjustable in height and lateral
capable for slopes by robust 9 PS-Robin-engine
16 × 6.5 – 8 AS tyres included in scope of delivery
OPTIONSwheels additional weights
Pictured machines can include accessories. Further models please see on www.agria.de
pair driving wheels4.00 - 8 AS4.00 - 10 AS5.00 - 12 AS
snow chains for 4.00 - 8 AS4.00 - 10 AS5.00 - 12 AS
twin tyreequipment
History
Multi purpose mach./Soil culti-vation/sweeping
front weightswheel weights
agria 2200 in use with rotary mulcher
4 5
lockable diff erential axle makes the machine controllable and nevertheless reversible easily
turnable handle bar guarantees an easy change from back to front mounting and by this makes the machine universally usable
“the allrounder for the daily use”
machine adjusted tothe needs bycomprehensive equipment options
rpm. of the power take-off independent of gear allows stepless adjust-ment of the operation conditions
Weed removal
Weed sweeper• working width 60 cmOptional with: brush with steel spring for universal application, brush with steel cables for special use
Weeding brush• working width: 100 cmOptional with: brush mixed, brush with fl at steel
Maintenance of paths on water-bound surface
Surface conditioner• working width: 90 cm
Snow removal
Snow dozer• working width: 125 cmRecommendation: weightsOptions: Plastic wear strip
Snow blowing
Snow blowing thrower • 2-stage• operation width: 70 cm
Spreading
Spreader• Spreading width: 0.6 upto 4.0 m, adjustable steplessly• 75 litres
Sweeping
Front mounted sweeper• working width: 120 cm• diameter of roll: 45 cm • pivotable• 2-shift sweeper driveOpionally: with fi ne brush, coarse brushOptions: splash guard, snow chains
Combined sweeping
Front mounted sweeper • working width: 100 cm• working tools: Brushes optionally fi ne or coarseOptions: refuse collector bin, splash guard, mounted gully brush, water sprinkler
Mulching
Heavy duty rotary mulcher• operation width: 80 cmOptions: front guide wheels
Flail mulcher• operation width: 80 cmOptions: front guide wheels
Safety Mulcher• operation width: 85 cm
Mowing
Double knife cutter• operation width: 125 cm, 140 cm and 160 cmNecessary: protection guardOptions: additional weights, lawn sowing grass distributor, fender right and left, skids
Portal mowing attachments• working width: 140 cm and 160 cm
Band rake
Band rake• working width: 160 cm
Transporting
two-wheeled trailer • body size: 170 x 120 x 32 cm• Permissible gross weight: 650 kg
Rotavators
Rotavator• operation width: 70 cm and 80 cm• working tools: fi ne and courseRecommendation: weights
Stone burying
Stone burier • operation width: 70 cm and 80 cm
Wheeled hoeing
Power harrow • working width: 75 cm, 90 cm and 100 cmOptions: Mounted lawn sowing machine, height adjusting spindle, electrical height adjustments
Harrow• working width: 120 cmRecommendation: weights
Combi-crumbler• operation width: 85 cmNecessary: Implement couplingRecommendation: weights
Equalizing
Double smoothing and levelling rakeJBM 1301• operation width: 130 cmOptions: Edge trimmer, levelling blade, smooth perforated roller
Ridging
Ridger• double row: Width of row 43 - 66 cmNecessary: Implement couplingRecommendation: weights
Ploughing
Single ploughNecessary: Implement couplingRecommendation: weights
Quarter turn plough• also available in heavy versionNecessary: Implement coupling
Potato digging ploughNecessary: Implement couplingRecommendation: weights
Cultivating
Cultivator• operation width: adjustable 55 – 85 cmRecommendation: weights
Spring tine cultivator• operation width: adjustable 30 – 70 cm Necessary: Implement couplingRecommendation: weights
SOILCULTIVATION
GREEN LANDAPPLICATIONS
MAINTENANCEOF GROUNDS AND PATHS
agria 3400 agria 3400 KL agria 3400 Diesel agria 3400 KL Diesel
Article number 3400 111 3400 131 3400 421 3400 441
Fuel petrol petrol Diesel Diesel
Engine Robin EH 34 Robin EH 34 Yanmar L 100 N Yanmar L 100 N
Power 8.1 kW (11 DIN-HP) 8.1 kW (11 DIN-HP) 7.4 kW (10 DIN-HP) 7.4 kW (10 DIN-HP)
Starter hand launching hand launching hand launching hand launching
Gearbox 4-stroke reverse gear in diff erent version with lock 4F/4B*
4-stroke reverse gear 4F/4B*
4-stroke reverse gear in diff erent version with lock 4F/4B*
4-stroke reverse gear 4F/4B*
Steering – Single-wheel steering clutch breaks – Single-wheel steering clutch breaks
Speeds F/B*: 1.0; 1.9; 3.25 and 7.1 km/h F/B*: 1.0; 1.9; 3.25 and 7.1 km/h F/B*: 1.0; 1.9; 3.25 and 7.1 km/h F/B*: 1.0; 1.9; 3.25 and 7.1 km/h
Weight (without wheels) approx. 103 kg approx. 121 kg approx. 135 kg approx. 141 kg
Also available with Fast gear 16.9 km/h – Fast gear 16,9 km/hE-StartE-Start + Fast gear 16.9 km/h
E-Start
*3B in case of handlebar position two-wheeled tractor
OPTIONSwheels additional weights
TECHNICAL DATA
Front weightsWheel weights
Pair steel cagewheels, 10“• for mounting without tools
UNIVERSAL IMPLEMENT
3400Two-wheeled tractors
machine with handlebar rotated by 180°
the handlebar can be laterally easily adjusted
Quick coupling system for an easy and quick change of implements
Pair driving wheels5.00 - 10 AS5.00 - 12 AS
Pair driving wheels23 x 8.50 - 12 AS
Pair driving wheels21 x 11.00 - 8 AS Terra
Snow chains for 5.00 - 10 AS5.00 x 12 AS• cross section
Twin tyre equipment
Image agria 3400 421
agria 3400 in use with rotavator
agria 3400 with snow thrower
agria 3400 with weed brush
History
Multi purpose mach./Soil culti-vation/sweeping
6 7Pictured machines can include accessories. Further models please see on www.agria.de
Mowing
Finger cutter bar• operation width: 130 cm and 145 cm
Finger cutter bar mulching • working width: 162 cm and 192 cm
Universal cutter bar• working width: 125 cm and 145 cm
Municipal cutter bar• working width: 125 cm and 145 cmOptions: cutter bar fender right and left
Double knife cutter bar• working width: 125 cm, 140 cm and 160 cm• Recommended: weightsOptions: skids, grass distributer,cutter bar fender right and left
Portal mowing attachment• working width: 140 cm and 160 cm
Band rake
Mounted band rake (only 5900 petrol) • working width: 160 cm• 10 teeth, 2 V-bars
Baler
Round baler • Baler dimensions: diameter 55 cm, width 52 cm• For compression of hay, silage and leaves
Mulching
Heavy duty rotary mulcher• working width: 80 cm and 122 cm
Options: front guide wheel
Flail mulcher• working width: 80 cm and 100 cm Options: front guide wheel
Safety Mulcher• working width: 85 cm, 105 cm and 125 cm
Stone burying
Stone burier • working width: 80 cm
Wheeled hoeing
Front mounted power harrow• working width: 90 cm and 100 cm
Options: mounted lawn sawing machine, height adjusting spindle, electrical height adjustment
wood chippers
Front mounted wood chipper (only agria 5900 petrol)• maximum size of bough: in case of 11-13 HP up to 50 mm, in case of 13-16 HP up to 80 mm, in case of 16-22 HP up to 100 mm
SOILCULTIVATION
WOOD MANAGEMENT
GREEN LANDAPPLICATIONS
GREEN LANDAPPLICATIONS
Weed removal
weeding brush• working width 100 cmOptions: mixed brushes, fl at steel brushes
Maintenance of paths on water-bound surfaces
Surface conditioner• working width: 90 cm
Snow removal
Snow dozer• working width: 125 cmOptions: front weight, plastic wear strip
Snow blowing
Front mounted snow thrower ZAUGG • working width: 85 cm• Blowing decoiler diameter 55 cm• Spinner diameter 45 cm
Spreading
Spreader• working width: 0,6 bis 4,0 m• Steplessly adjustable• 75 litres capacity container
Sweeping
Front mounted sweeper• working width: 120 cm• roll diameter: 45 cm • pivoting• 2-shift sweeper drive• working tools: brushes alternatively fi ne or coarseOptions: splash guard, snow chains
MAINTENANCEOF GROUNDS AND PATHS
OPTIONSwheels
agria 5900 Bison agria 5900 Bison Diesel
agria 5900 Taifun 18 agria 5900 Taifun 22 agria 5900 Taifun Diesel
Article number 5900 421 5900 141 5900 241 5900 251 5900 521
Fuel petrol Diesel petrol petrol Diesel
Engine Briggs & StrattonVanguard, 1-cylinder
Yanmar L 100N-D,1-cylinder
Briggs & StrattonVanguard, 2-cylinder
Briggs & StrattonVanguard, 2-cylinder
Lombardini 25 LD 425,2-cylinder
Power 9.7 kW (13 SAE-HP) 7.4 kW (10 DIN-HP) 13.4 kW (18 SAE-HP) 16.4 kW (22 SAE-HP) 14 kW (19 SAE-HP)
Starter hand launching hand launching Electro start Electro start Electro start
Gear drive Stepless hydrostat traction drive with one disk dry clutch
Stepless hydrostat traction drive with one disk dry clutch
Stepless hydrostat traction drive with one disk dry clutch
Stepless hydrostat traction drive with one disk dry clutch
Stepless hydrostat traction drive with one disk dry clutch
Steering active steering of bar active steering of bar active steering of bar active steering of bar active steering of bar
Speeds F: 0-7 km/h, B: 0-4 km/h F: 0-7 km/h, B: 0-4 km/h F: 0-7 km/h, B: 0-4 km/h F: 0-7 km/h, B: 0-4 km/h F: 0-7 km/h, B: 0-4 km/h
Tyre equipment 23 x 8.50 - 12 AS 23 x 8.50 - 12 AS 23 x 8.50 - 12 AS 23 x 8.50 - 12 AS 23 x 8.50 - 12 AS
Cyclonfi lter option - - standard equipment -
Weight approx. 200 kg approx. 230 kg approx. 220 kg approx. 220 kg approx. 250 kg
Also available with portal axleElectro starthand protection operation head lights
portal axleElectro starthand protection operation head lights
portal axlehand protection operation head lights
portal axlehand protection operation head lights
portal axlehand protection operation head lights
TECHNICAL DATA
UNIVERSAL IMPLEMENT
5900 Bison/Taifun Implement carrier
Easy steering possible by active steering of bar
Stepless traction drive
Central locking brake
Professional mounted implement system
»the powerful agria carrier implement«
»The strongest implement carrier«
Portal-axle: Adjustment for shift of gravity center (option)
Release of wheels possible
pair driving wheels5.00 - 10 AS5.00 - 12 AS
pair driving wheels23 x 10.50 - 12 AS20 x 8.00 - 10 lawn
21 x 11.00 - 8 AS Terra
twin tyre equipment
snow chains for 23 x 8.50 - 12 AS• cross section
pair steel cage wheels 10“ and 12“ • for mounting without tools
Image agria 5900 421
Image agria 5900 241
agria 5900 with stone burrier
agria 5900 with weeding brush
agria 5900 with fl ail mulcher and twin tyre equipment on steep slope
History
Multi purpose mach./Soil culti-vation/sweeping
8 9Pictured machines can include accessories. Further models please see on www.agria.de
agria 5900 Taifunin use with ̈ail mulcher
Mowing
Finger cutter bar• operation width: 130 cm and 145 cm
Finger cutter bar mulching (only agria 5900)• working width: 162 cm and 192 cm
Universal cutter bar• working width: 125 cm and 145 cm
Municipal cutter bar• working width: 125 cm and 145 cmOptions: cutter bar fender right and left
Double knife cutter bar• working width: 125 cm, 140 cm and 160 cm• Recommended: weightsOptions: skids, grass distributer,cutter bar fender right and left
Portal mowing attachment• working width: 140 cm and 160 cm
Band rake
Mounted band rake (only 5500 and 5900 petrol) • working width: 160 cm• 10 teeth, 2 V-bars
Baler
Round baler (only agria 5900)• Baler dimensions: diameter 55 cm, width 52 cm• For compression of hay, silage and leaves
Mulching
Heavy duty rotary mulcher• working width: 80 cm and 122 cmOptions: front guide wheel
Flail mulcher• working width: 80 cm • working width: 100 cm (only agria 5900)Options: front guide wheel
Safety Mulcher• working width: 85 cm• working width: 105 cm and 125 cm (only agria 5900)
Stone burying
Stone burier • working width: 80 cm (only agria 5900)• working width: 70 cm (only agria 5500)
Wheeled hoeing
Front mounted power harrow• working width: 75 cm (only agria 5500)• working width: 90 cm and 100 cm (for agria 5900 and 5500)Options: mounted lawn sawing machine, height adjusting spindle, electrical height adjustment
wood chippers
Front mounted wood chipper (only agria 5900 petrol)• maximum size of bough: in case of 11-13 HP up to 50 mm, in case of 13-16 HP up to 80 mm, in case of 16-22 HP up to 100 mm
SOILCULTIVATION
WOOD MANAGEMENT
GREEN LANDAPPLICATIONS
GREEN LANDAPPLICATIONS
Weed removal
weeding brush• working width 100 cmOptions: mixed brushes, fl at steel brushes
Maintenance of paths on water-bound surfaces
Surface conditioner• working width: 90 cm
Snow removal
Snow dozer• working width: 125 cmOptions: front weight, plastic wear strip
Snow blowing
Front mounted snow thrower ZAUGG (only agria 5900)• working width: 85 cm• Blowing decoiler diameter 55 cm• Spinner diameter 45 cm
Snow blower (only agria 5500)• 2-stage• working width: 70 cm
Spreading
Spreader• working width: 0,6 bis 4,0 m• Steplessly adjustable• 75 litres capacity container
Sweeping
Front mounted sweeper• working width: 120 cm• roll diameter: 45 cm • pivoting• 2-shift sweeper drive• working tools: brushes alternatively fi ne or coarseOptions: splash guard, snow chains
Combined sweeping
combined sweeper (only agria 5500)• working width: 100 cm• operation tools: brushes alternatively fi ne or coarseOptions: refuse collector bin, splash guard,mounted lateral sweeper, water sprinkler
MAINTENANCEOF GROUNDS AND PATHS
OPTIONSwheels
UNIVERSAL IMPLEMENT
5900 Cyclone Implement carrier
UNIVERSAL IMPLEMENT
5500 Implement carrier
patented vibration-cushioned two-axle bar bearing reverse gear shift
on the handlebar
driving and locking brake
optimized gear shifting
»ideal all-rounder«
pair driving wheels5.00 - 10 AS5.00 - 12 AS
pair driving wheels23 x 10.50 - 12 AS20 x 8.00 - 10 lawn
21 x 11.00 - 8 AS Terra
twin tyre equipment
snow chains for 23 x 8.50 - 12 AS• cross section
pair steel cage wheels 10“ and 12“ • for mounting without tools
Image agria 5500 341
agria 5900 with stone burrier
agria 5900 with weeding brush
agria 5500 Grizzlypremium
Article number 5500 341
Fuel petrol
Engine Robin EH 34
Power 8,1 kW (11 DIN-HP)
Starter hand launching
Gearbox 8-shift pinion gearbox 4F/4B
Steering single-wheel steering brake clutches
Speeds F/B: 1,0; 1,9; 3,25 and 7,1 km/h
Handlebar adjustable in height and lateral without tools, vibration-cushioned
Tyre equipment 5.00 - 10 AS
Weight approx. 140 kg
TECHNICAL DATA
History
Multi purpose mach./Soil culti-vation/sweeping
10 11Pictured machines can include accessories. Further models please see on www.agria.de
agria 5900 Cyclone 18 agria 5900 Cyclone 22
Product number 5900 341 5900 351
Fuel petrol petrol
Engine Briggs & Stratton Vanguard 2-cylinder Briggs & Stratton Vanguard 2-cylinder
Power 13,4 kW (18 SAE-HP)) 16,4 kW (22 SAE-HP)
Starter Hand launching or electro start Hand launching or electro start
Gear Stepless hydrostatic traction drive with single dry plate clutch
Steering Power-assisted steering and easy-control system
Speeds F: 0 - 6 km/h, B: 0 - 4 km/h F: 0 - 6 km/h, B: 0 - 4 km/h
Standard tyre equipment 23 x 8.50 - 12 AS 23 x 8.50 - 12 AS
Weight approx. 226 kg approx. 230 kg
Standard equipment Stand, elevated cold air intake, LED-lighting for a totally secure use, hydraulic safety valve, height and laterally adjustable steering bar without tools and rubber-cushioned, outlet 12V, operation hour counter, driving and fi xing brake, cyclone fi lter assembly set (only for item 5900 351)
Options portal axle for gravity centre‘s adjustment, pair hand protection, operation headlights
TECHNICAL DATA
Innovative easy-control system with a much easier steering of the machine
LED-lighting for a totally secure use in dusk and darkness
»comfortable work assured«
The power-assisted steering guarantees an intuitive steering with minimum eff ort
included security, when releasing the dead-man‘s handle, the machine breaks down right away, the power take off cuts out but the engine is still running
Image agria 5900 341
Standart support makes easier the storage of the machine
Optimised air intake to protect the engine from overheatings
easy-control unit
optimised air intake in order to minimize the dust and dirt absorption
Standart support makes easier the tools´change and the storage of the machine without tool
NOVELTY
Engine speed adjustment
Change of speed control: conti-nuous / stepped
Regulation of the driving speedforwards / backwards
Control unit adjustment: adaptation to the diff erent hand sizes of the user
Stop
Assistance when turning: turning back to the driving direction
COMBINED EQUIPMENT SWEEPING/SNOW
7100Sweepers
Combined equip-ment sweeping/snow
agria 7100 basic
agria 7100 compact
agria 7100 comfort
agria 7100 premium
Article number 7100 031Combined brush
7100 051 Brush coarse7100 061 Brush fi ne
7100 151 Brush coarse7100 161 Brush fi ne
7100 221 Brush coarse7100 321 Brush fi ne
Fuel petrol petrol petrol petrol
Engine Honda GCV 135 Honda GCV 135 Honda GCV 160 Honda GCV 160
Power 3.4 kW (4,5 SAE-HP) 3.4 kW (4,5 SAE-HP) 4.1 kW (5,5 SAE-HP) 4.1 kW (5,5 SAE-HP)
Starter hand launching hand launching hand launching hand launching
Gear box Worm gearing with V-belt coupling, 1F
Worm gearing with V-belt coupling, 1F
Worm gearing with V-belt coupling, 1F/1B
Stepless hydrostaticdrive gear
Speeds F: 2.4 km/h F: 2.8 km/h F: 2.8 km/hB: 1.8 km/h
F: 0-5 km/hB: 0-3 km/h
Weight (without wheels)
approx. 70 kg approx. 90 kg approx. 100 kg approx. 100 kg
Tyre equipmentoptionally
4.00 - 4 3.50 - 6 AS, 13 x 5.00 - 6 lawn
3.50 - 6 AS, 13 x 5. 00 - 6 lawn
3.50 - 6 AS, 13 x 5. 00 - 6 lawn
Working width 70 cm 80 cm 100 cm 100 cm
Brushes optionally combined brushes Brush roll fi ne or coarse
Brush roll fi ne or coarse
Brush roll fi ne or coarse
TECHNICAL DATA
agria 400 E agria 400 P
Article number 0400 331 0400 351
Fuel petrol petrol
Engine Briggs & Stratton Honda GX 200
Power 3,2 kW (5 SAE-HP) 4,8 kW (6,5 SAE-HP)
Starter hand launching hand launching
Gear box Worm gearing with V-belt coupling, 2F/1B
Worm gearing with V-belt coupling, 3F/1B
Speeds F: 3,6 and 7,3 km/h B: 1,8 km/h
F: 3,6; 5,6 and 8,3 km/h B: 1,8 km/h
Weight (without wheels) approx. 45 kg approx. 60 kg
TECHNICAL DATA
»the favourable entry for the private user«
»in this way sweeping is done automatically«
OPTIONSwheels additional weights
pair driving wheels 13 x 5.00 - 6,lawn pro� le
3.50 - 6 AS
4.00 - 8 AS, agricultural tread
snow chains for13 x 5.00 - 6(ladder chain)
twin tyreequipment
front weightswheel weights
Hoeing und Rotavators
Pair hoeing tools• working width: 45 cmNecessary: rotor coversOptions: side shields, working width enlargement 20 cm, hoeing skid, wheel skid
Ridging
Ridger• working width: 36 cmOption: traction wheels
Ploughing
Single plough Necessary: implement coupling
Quarter turn plough Necessary: implement coupling
SOILCULTIVATION
Mowing
Universal cutter bar• working width: 105 cm• with adjustable cutter skids
GREEN LANDAPPLICATIONS
Combined sweeping
combined front-mounted sweeper• agria 3600: working width 90 and 100 cm• agria 2200: working width 100 cm• roll diameter: 37 cm• quick-change axle pendulum mounted• swivelling• adjustment of depth stepless via spindles • working tools: brushes optionally fi ne or coarseOptions: refuse collector bin, splash guard,mounted gully brush, water sprinkler
Snow removal
Mounted snow dozer• working width: 100 cmOptionen: front weight, plastic wear strip
Spreading
Towed roller spreader• for spreading sand, salt and mixed material• upholstered operator seat • 50 l container capacity• spreading width approx. 70 cm
Not licenced for public road traffi c
MAINTENANCEOF GROUNDS AND PATHS
Transporting
Transport trough• tipping device• contents 80 litresNecessary: connecting pieces
Sweeping
Front-mounted sweeper• working width: 100 cm• roll diameter: 35 cm• pivotable• height adjustment stepless• working tools: brushes alternatively fi ne or coarse• 2-shift sweeper drive
MAINTENANCEOF GROUNDS AND PATHS
OPTIONS
Snow dozer, alter-natively also with plastic wear strip
Refuse collector bin
Water sprinkler Snow chains
agria 400 with sweeper
agria 7100 with snow dozer
Image agria 7100 321
Image agria 7100 031
Image agria 0400 351
COMBINED EQUIPMENT SWEEPING/SNOW
0400Implement carrier
History
Multi purpose mach./Soil culti-vation/sweeping
12 13Pictured machines can include accessories. Further models please see on www.agria.de
overlapping roll brush and possibility to traverse the brush guarantee tidy cleaning of the edges
cleanstar premium: due to stepless hydrostat drive very comfortable operation
easy steering and manoeu-vering by free-wheeled drive wheels
compact dimensions facilitate handling, storing and transport
comfortable handling due to ergonomically formed handle bar
multi-purpose accessories for the all-season application
with Cleanstar comfort or premium version rpm of brushes can be adjusted steplessly to the sweepings
“your real estate will look surprised”
vibration-cushioned, height-adjustable and without tools, laterally adjustable
well-proven machine with safe and perfect techno-logy off ers function safety and longevity
change of implements without tools for quick mounting and dismounting
many implements make possible all-season application
forward/backward-shift on the bar guarantees safe and comfortable operation also in extreme situations
History
Multi purpose mach./Soil culti-vation/sweeping
Wat
er
Air
Nutrie
nt
Wat
er
Air
Nutrie
ntVerticutters/Combined equip-ment mowing
BRUSH CUTTER
8000
Application between brush cutter and cutter bar mower where this is too wide or too heavy
agria 8000-58Brush cutter
agria 8000-64Brush cutter
Article number 8000 612 8000 622
Fuel petrol petrol
Engine Honda GCV 160 Honda GCV 190
Power 4,1 kW (5,5 SAE-HP) 4,8 kW (6,5 SAE-HP)
Starter hand launching hand launching
Gear box worm gearing, shiftable, 1F worm gearing, shiftable, 1F
Gänge 3,5 km/h 3,5 km/h
Weight ca. 60 kg ca. 65 kg
Handlebar height adjustable height and laterally adjustable
Tyre equipment pneumatic tyres, height adjustable
pneumatic tyres, height adjustable
Working width 58 cm 64 cm
TECHNICAL DATA
Fig. agria 8000 622
agria 8000
one-hand reverse gear shift
agria 5400 on steep slope
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
14 15
Image agria 8000 612
...and transport in the carJust fold...
detachable swath deflector cuts gras, scrub and boughs
Image agria 8200 983
VERTICUTTERS
8200
Image agria 8200 971
quick lift device enables easy transport of the machine without influence on the fine adjustment
cutter blades rotating against the driving di-rection provide optimum results (agria 8200-V6R)
oscillating scarifier blades (agria 8200-V4)
agria 8200-V4 agria 8200-V6R
Article number 8200 983 8200 971
Fuel petrol petrol
Engine Honda GC 135 Robin EH 17
Power 2,9 kW (4 SAE-HP) 4 kW (6 DIN-HP)
Working width 40 cm 50 cm
Wheel drive - rear wheel drive, 2.5 km/h
Handlebar foldable without tools foldable
Housing steel sheet with plastics coating steel sheet
Weight approx. 37 kg approx. 70 kg
Blades 32 oscillating suspended blades made of hardened special steel
19 fi xed blades made of hardened special steel
Adjustment of depth stepless with quick lift device stepless with quick lift device
Collection equipment 50 l collection bag -
Tyre equipment Plastics wheels withball bearing
Plastics wheels withspecial ball bearing
TECHNICAL DATA
Pictured machines can include accessories. Further models please see on www.agria.de
easy transport in the car possible due to low net weight and com-pact construction
new: easy height adjustment of the bar without tools
»mowing like a star«
low maintenanceeff ort
attractive cost-performance ratio
new: lateral protection plates for maximum safety
new: slotted protection cloth for consistent lay down of the cut material
new: robust handle
“ventilate your lawn”
the verticutting depth can be adjusted accurate to mm and stepless
robust verticutting blades made of hardened special steel provide perfect results
powerful engine capable for slopes for use even in most stubborn materials
V-belt coupling makes possible comfortable switching from the bar
foldable bar for easy transport
stepless adjust-ment of depth for optimum adjustment to diff erent ground conditions
wheel drive guarantees comfortable and eff ort-saving operation
quick lift device avoids dis-placement of operation depth
safe to operate up to 45° slope (100 %)
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
agria 5400 KL with cutter bar and spiked wheels
Verticutters/Combined equip-ment mowing
Snow removal
snow dozer• working width: 100 cm• pivotableOptions: plastic wear strip
Mowing
universal cutter bar• operation width 71, 91, 105 cm
GREEN LANDAPPLICATIONS
MAINTENCE OF GROUNDS AND PATHS
COMBINED MOWER
5300Meadow mower
COMBINED MOWER
5100Meadow mower
»Mowing very easily without problems«
agria 5100Rabbit
Article number 5100 321
Fuel petrol
Engine Honda GCV 160
Power 4.1 kW (5,5 SAE-HP)
Starter hand launching
Gear box Worm gearing with V-belt coupling, 1F/1B
Speeds V: 2.8 km/h, R: 1.8 km/h
Weight approx. 70 kg
Handlebar height and laterally adjustable, vibration-cushioned
Tyre equipment 3.50 - 6 AS
Working widths alternatively 71, 91 and 105 cm universal cutter bar
Options snow dozer 100 cm, plastic wear strip, twin tyre equipment and snow chains
TECHNICAL DATAagria 5300
Article number 5300 531
Fuel petrol
Engine Honda GX 200
Power 4.8 kW (6.5 SAE-HP)
Starter hand launching
Gear boox worm gearing with V-belt coupling, 1F
Lenkung –
Speeds F: 3 km/h, B: 2.3 km/h
Weight approx. 70 kg
Handlebar height and lateral adjustable, vibration-cushioned
Tyre equipment 3.50 - 6 AS
Working widths alternatively 105/122 cm universal cutter bar, 105 cm municipal cutter bar
TECHNICAL DATA
Useful orientated design guarantees a very good fl ow of grass forward/backward shifting for
safe and quick reversing lateral bar adjustment without tool makes possible guidance of machine from the side
reverse shifting on the handle for safe and comfortable working also in extreme situations
self-locking gear box reduces accident risk
low-maintenance, long-live and easy start engine is ideal for use in thick crops and in diffi cult grounds
Image agria 5100 321
Image agria 5300 531
agria 8000
one-hand reverse gear shift
agria 5400 on steep slope
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
16 17
OPTIONSwheels
twin tyreequipment
snow chains for 3.50 - 6 AS
steel cage wheels
OPTIONSwheels
twin tyreequipment
snow chains for 3.50 - 6 AS
steel cage wheels
Snow removal
snow dozer• working width: 100 cm• pivotableOptions: plastic wear strip
Mowing
universal cutter bar• working width 105 and 122 cm
Municipal cutter bar• working width: 105 cm
GREEN LANDAPPLICATIONS
MAINTENANCEOF GROUNDS AND PATHS
Pictured machines can include accessories. Further models please see on www.agria.de
“there is not any grass grown to match it”
vibration-cushioned bar bearing
powerful engine for comfortable opera-tion also with thick crops and in diffi cult grounds
wide trail provides high steadiness
one hand reverse shift for safe and quick reversing
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
Verticutters/Combined equip-ment mowing
Snow removal
snow dozer• working width: 100 cm• pivotableOptions: plastic wear strip
Mowing
� nger cutter bar (only 5400)• working width 130 cm and 145 cm
universal cutter bar• working width 125 and 145 cm
municipal cutter bar• working width: 125 and 145 cm
GREEN LANDAPPLICATIONS
MAINTENCE OF GROUNDS AND PATHS
KCOMBINED EQUIPMENT MOWING
5400Cutterbar mower
»comfortable mowing in most di« cult grounds«
OPTIONSwheels additional weights
additional weights
pair driving wheels4.00 - 8 AS16 x 6.50 - 8 AS
twin tyre equipment
snow chains for 4.00 - 8 AS16 x 6.50 - 8 AS
steel cage wheels
spiked wheels
agria 5400 agria 5400 KL
Article number 5400 261 5400 341 (planetary mowing drive)5400 344 (planetary mowing drive)5400 541 (double knife mowing drive)
Fuel petrol petrol
Engine Robin EH 17 Robin EH 25
Power 4.0 kW (6 DIN-HP) 5.9 kW (8 DIN-HP)
Starter hand launching hand launching
Gear box pinion control gear with dry coupling and mountain safety break, 2F/2B
pinion control gear with cone-dry coupling and mountain safety break, (only 5400 344), 2F/2B
Steering – single-wheel steering clutch brake
Speeds F/B: 2.2 km/h; 3.4 km/h F/B: 2.2 km/h; 3.4 km/h
Weight approx. 100 kg approx. 140 kg
Handlebar adjustable in height and lateral, vibration-cushioned (patented by DE 3503938, licensor Fraunhofer Gesellschaft zur Förderung der angewandten For-schung e. V.)
adjustable in height and lateral, vibration-cushioned (patented by DE 3503938, licensor Fraunhofer Gesellschaft zur Förderung der angewandten For-schung e. V.)
Tyre equipment 4.00 - 8 AS 4.00 - 8 AS
Working widths alternatively 130/145 cm fi nger cutter bar,125/145 cm universal cutter bar,125/145 cm municipal cutter bar
alternatively 130/145 cm fi nger cutter bar,125/145 cm universal cutter bar,125/145 cm municipal cutter bar
TECHNICAL DATA
vibration-cushioned two-axle bar bearing (patented by DE 3503938, licensor Fraunhofer Gesellschaft zur Förderung der angewandten Forschung e. V.) considerably reduces vibrations and allows working all day (KL)
Powerful engine with high capacity is safe to operate due to a special oil whizzer fi nger up to 45° slope (100%) and with strong torque in dense crops and in diffi cult grounds
Maximized ground clearance with low center of gravity avoids risks in case of crossing barriers and creates safety reserves when mowing across the slopes
Mountain safety break for safe working on steep slopes(only 5400 344)
Image agria 5400 344
agria 8000
One hand reverse gear shift
agria 5400 on steep slope
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
18 19
agria 3600 BM Unihamster compact
agria 3600 BM Unihamster comfort
agria 3600 BM Unihamster premium
Article number 3600 921 3600 941 3600 971
Fuel petrol petrol petrol
Engine Robin EH 17 Robin EH 17 Robin EH 17
Power 4 kW (6 DIN-HP) 4 kW (6 DIN-HP) 4 kW (6 DIN-HP)
Starter hand launching hand launching hand launching
Gear box pinion shift gearbox with two-disk-dry coupling 2F/2B
pinion shift gearbox with two-disk-dry coupling 3F/3B
pinion shift gearbox with two-disk-dry coup-ling, with operation and locking break 3F/3B
Speeds F: 1.9 and 3.8 km/h; B: 1.2 and 2.4 km/h
F: 1.7; 2.8 and 3.9 km/h; B: 1.3; 2.1 and 3.0 km/h
F: 1.7; 2.8 and 3.9 km/h; B: 1.3; 2.1 and 3.0 km/h
Weightwithout cutter bar
approx. 65 kg approx. 70 kg approx. 70 kg
Tyre equipment 4.00 - 8 AS 16 x 6.50 - 8 AS 16 x 6.50 - 8 AS
COMBINED MOWER
3600 BMImplement carrier
OPTIONSwheels
pair driving wheels4.00 - 8 AS16 x 6.50 - 8 AS4.00 - 10 AS
steel cage wheels
twin tyre equipment
Mulching
Heavy duty rotary mower • working width: 65 cm• with knife break• 2-stage cutting height adjustment 40 and 55 mm• adjustable sliding skidsOptions: branch defl ector, fl y wheel
Mowing
universal cutter bar• working width: 117 cm
municipal cutter bar• working width: 117 cm
� nger cutter bar• working width: 125 cm
Band rake
front-mounted band rake• working width: 120 cm• for loosening-up, turning over, swathing and for removal of leaves• 8 pronged rakes, 1 V-belt
Snow removal
snow dozer• working width: 100 cmNecessary: weightsOptions: plastic wear strip
snow blowing
snow thrower• working width: 60 cm• 2-stage
Spreading
Spreader• Spreading width: 0.6 upto 4.0 m• steplessly adjustable• 75 litres capacity
sweeping
front-mounted sweeper• working width: 80 and 100 cm• roll diameter: 35 cm• swivable• stepless height adjustment• stepless sweeper speed• working tools: brushes alternatively fi ne or coarseOptions: refuse collector bin
combined sweeping
front-mounted sweeper• working width: 90 and 100 cm• roll diameter: 37 cm• quick change axle suspended oscillatingly • swivable• adjustment of depth stepless by spindles• working tools: brushes alternatively fi ne or coarseOptions: refuse collector bin, splash guard,mounted gully brush, water sprinkler
GREEN LANDAPPLICATIONS
MAINTENANCEOF GROUNDS AND PATHS
Image agria 3600 921
TECHNICAL DATA
agria 7600
Pictured machines can include accessories. Further models please see on www.agria.de
low-wear and low-noise oil bath cutter bar mower drive with no-play, readjus-table blade drive
2 respectively 3 F/B gears allow operation speed always adjusted to the application
purpose orientated design ensures excellent fl ow of grass and reduced congestion
the premium version is standard-equipped with driving brake
“the multi-talent for all-season application”
safe to operate up to 45° slope (100 %)
handle bar vibrati-on-cushioned and adjustable in height without tools
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
agria 5400 KL with cutter bar and spiked wheels
STUMP GRINDER
7600WOOD CHIPPER
7500
Wood management
TECHNICAL DATA
agria 3600 BM with steel cage wheels
agria 7600
agria 3600 BM with snow dozer
agria 3600 BM with twin tyres
Image agria 7600 031
agria 7600
Article number 7600 031
Fuel petrol
Engine Briggs & Stratton Vanguard 2-cylinder
Power 23 kW (31 SAE-HP)
Starter electric start
Content of tank 20 l
Chassis crawler chassis
Traction drive hydraulic stepless
Rotavator tool- drive- fi nal drive- teeth- number of teeth
cutting wheel ø 350 mm3 V-belts2 V-beltsGreenteethTM
18 (9 x 2)
Rotavating area depthRotavating area height Rotavating area width
approx. 50 cm below ground levelapprox. 40 cm over ground levelapprox. 110 cm
Handlebar on both sides rotable 90° each
Dimensions (LxWxH) mm 1900 x 740 x 1500
Weight approx. 600 kg
Verticutters/Combined equip-ment mowing
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
20 21
TECHNICAL DATAagria 7500 TH 80
agria 7500 TH 100
agria 7500 TH 120
agria 7500 DTH 80
Article number 7500 311 7500 411 7500 511 7571 011
Fuel petrol petrol petrol –
Engine Honda GX 390, 1-cylinder Briggs & Stratton Vanguard, 2-cylinder
Honda GX 670, 2-cylinder –
Power 9.6 kW (13 SAE-HP) 13.4 kW (18 SAE-HP) 17.6 kW (24 SAE-HP) –
Starter hand launching electric start electric start –
Size of bough maximum diameter 80 mm maximum diameter 100 mm maximum diameter 120 mm maximum diameter 100 mm
Wheel drive – – stepless hydraulic F/B: 0-3,5 hm/h
–
Chipper type- section - number of blades- counter blade- drive drum
chipper section300 x 150 mm2 (hardened)1 (hardened)2 V-belts
chipper section400 x 150 mm2 (hardened)1 (hardened)3 V-belts
chipper section500 x 150 mm2 (hardened)1 (hardened)3 V-belts
chipper section300 x 150 mm2 (hardened)1 (hardened)2 V-belts
Hopperreeding heightdimensions
750 mm440 x 300 mm
800 mm 540 x 300 mm
800 mm500 x 300 mm
750 mm440 x 300 mm
Discharge channel option 240° rotary 240° rotary option
Dimensions (LxWxH) mm 1770 x 720 x 1230 2100 x 720 x 1400 2100 x730 x 1400
Weight approx. 120 kg approx. 150 kg approx. 220 kg approx. 180 kg
Image agria 7500 511
Image agria 7500 411
Image agria 7500 311
agria DTH 80 wood chipper for mounting on compact tractors
agria 7600
fully automatic operation under control
cutting wheel with 18 teeth - to be turned 3-fold without tools
Pictured machines can include accessories. Further models please see on www.agria.de
large pneumatic tyres in front, oscillating axle with turnover wheel at the rear
hydrostatic drive
exchangeable fuel tank system - annoying refuelling on site is deleted
low center of gravity for safe stand
professional 2-cylinder petrol engine with 18 HP
ideal inclination angle of the hopper for easy feeding “robust and compact”
only fully-automated stump grinder in this size of machines (patentated operation principle)
exchange fuel tank system for refuelling without problems on site
with a external width of only 75 cms it fi ts through every standard garden gate
hydraulic transmission and rubber crawlers make possible entry to impassable grounds and facilitates loading
low maintenance costs and inex-pensive replacement of operation tools guarantee low follow-up costs
“unique on the market”
Verticutters/Combined equip-ment mowing
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
agria 100-R with snow dozer
agria 3100
agria 1600 Farmstar
agria 1600 Farmstar
agria 100-R with plough
agria 100-R with driving wheels and plough
POWER HOE
0900-S
POWER HOE
1600COMBINED HOEING
100-RMulti-purpose power hoe
POWER HOE
3100Precision single wheel hoe
Hoeing
Lottery on the backside
Ridging
Ridger, adjustable• working width: 36 cmNecessary: implement coupling, pair traction wheels
Ridger • 2 rows • lateral adjustable • width of row: 43 – 66 cmNecessary: implement coupling, traction wheels 4.0 - 8 AS
Ploughing
Single plough with knife coulterNecessary: implement coupling
Half-turn plough
single ploughNecessary: implement couplingfront weight
Quarter turn plough with coulterNecessary: implement couplingfront weight
Potato digging ploughNecessary: implement coupling
Cultivating
spring tine cultivator• operation width: 30 – 70 cmNecessary: implement coupling
Harrowing
Combined crumbler• working width: 85 cmNecessary: implement coupling
SOILCULTIVATION
TECHNICAL DATAagria 900-S 1600 Farmstar
compact1600 Farmstarcomfort
1600 Farmstar premium
1600 Farmstar premium Diesel
agria 100-R
Article number 0900 143 1600 013 1600 513 1600 023 1600 523 0100 543
Fuel petrol petrol Diesel petrol Diesel petrol
Engine Honda GCV 135 Honda GX 160 Yanmar L 48 AE Honda GX 200 Yanmar L 48 AE Honda GX 160
Power 3.4 kW (4,5 SAE-HP) 4.1 kW (5,5 SAE-HP) 3.5 kW (5 DIN-HP) 4.8 kW (6,5 SAE-HP) 3.5 kW (5 DIN-HP) 4 kW (5,5 SAE-HP)
Starter hand launching hand launching hand launching hand launching hand launching hand launching
Gear box worm gearing with cone clutch 1F(235 min-1)
3-shift-pinion gear box with cone coupling 2F/1B, F: 87, 157 min-1/ B: 41 min-1
3-shift-pinion gear box with cone coupling 2F/1B, F: 87, 157 min-1/ B: 41 min-1
3-shift-pinion gear box with cone coupling 2F/1B, F: 87, 157 min-1/ B: 41 min-1
3-shift-pinion gear box with cone coupling 2F/1B, F: 87, 157 min-1/ B: 41 min-1
Pinion and chain drive with V-belt clutch 2F/1B, F: 3,6 and 11,7 km/h, B: 2,6 km/h
Weight approx. 40 kg approx. 63 kg approx. 73 kg approx. 55 kg approx. 65 kg approx. 50 kg
Handlebar height and lateral adjustable, foldable without tools
height and lateral adjustable, foldable without tools
height and lateral adjustable, foldable without tools
height and lateral adjus-table, foldable without tools
height and lateral adjustable, foldable without tools
height adjustable, lateral adjustable wit-hout tools, foldable
Working width 28, 45 and 65 cm 60 and 90 cm 60 and 90 cm 60, 70, 80, 88 and 98 cm with hoeing equipment*and protector disks
60, 70, 80, 88 and 98 cm with hoeing equipment*and protector disks
45 cm
Accessories standard
hoeing tools, protector disks, rotor cover, removable frontsupport wheel
– – – – hoeing tools, hoeing skid, front support wheel
Accessories optional
ridger fi xed,ridger adjustable, implement coupling
front support wheel, extension hoeing tools for 25cm enlar-gement
front support wheel, extension hoeing tools for 25cm enlar-gement
front support wheel, hoeing tools for working widths 60, 70, 80, 88 and 98 cm
front support wheel, hoeing tools for wor-king widths 60, 70, 80, 88 and 98 cm
extension hoeing tools for 20 cm enlargement, protector disks and rotor cover
*working tools not included in delivery
TECHNICAL DATAagria 3100
Article number 3100 353
Fuel petrol
Engine Honda GX 160
Power 4 kW (5,5 SAE-HP)
Starter hand launching
Gear box pinion and chain with multi-disk clutch 2F: 2.7 and 4.8 km/h
Weight approx. 50 kg
Handlebar height adjustable, lateral adjustable without tools
Working widths
10, 16, 22, 28, 32, 38, 42 and 50 cm*
Tyre equipment
3.00 - 4 AM
Accessories optional
front weight, ridgr with special rotor cover for 28, 32 and 38 cm
*working tools not included in delivery
Snow removal
Snow dozer• working width: 100 cmNecessary: connecting pieceOption: plastic wear strip
MAINTENANCEOF GROUNDS AND PATHS
Imageagria 0100 543
Image agria 1600 023
Image agria 0900 143
Image agria 3100 353
Wood management
Vertikutters/Combined equip-ment mowing
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
22 23Pictured machines can include accessories. Further models please see on www.agria.de
handle bar side and height adjustment without tools allows operation off set and adjustment of handle bar on body height
plug-in hexagon shaft cares for safe power transmission, lower wear and tear and easy change of hoeing tools
robust, solid basic machine for hard continuous operation
professional hoeing tools can be combined positive-fi tted and tied in various operation widths with positive fi tting
“from professionals for professionals”
easy start and smooth 4-stroke engine for comfortable operation and low emission
foldable handlebar for easy loading
tool-less handle bar adjustment both vertically and horizontally allows working besides the hoed ground
“hoeing and ridging at full power”
easy start, vibration free and low maintenance engine for comfortable working
vertical handlebar ad-justment allows working off set from the machine
2 Gears forward, by this opti-mum speed ploughing and rotavating
long-living, its value holding and robust technology
“as strong as a bear – a match for any task”
1 Gear backward for easy manoeuvering
front wheel for easy transport
drive remaining in the trail makes possible exact and effi cient hoeing without interference of horticultural crop
very stable hoe blades are insensible in case of conti-nuous operation and treat also hard grounds
advantageous power loading: high engine power with low weight
operation safety up to an inclination angle of 45° (100 %)
favourable price allows entry into the precision hoe technology also for smaller companies
“in this way you always stay in track”
quick-adjustable lever for shifting of sides for handle bar
Wood management
Vertikutters/Combined equip-ment mowing
Combined equip-ment sweeping/snow
History
Multi purpose mach./Soil culti-vation/sweeping
YOU CAN WIN A GENUINEMULTITALENT.
And those are your prices:
For participation in our lottery you only have to answer the following 3 questions correctly.
Question 1:Which agria machine is pictured on the cover picture?
agria 5900 Taifun agria 5900 Cyclone agria 7100 Cleanstar
Question 2:In which performance strength is the new agria 5900 Cyclone not available?
13 SAE-HP 18 SAE-HP 22 SAE-HP
Question 3:The new easy-control unit of the agria 5900 Cyclone is able to
have in� uence on the weather (weather assistant) clean the machine after working (washing assistant) turning back the driving direction (turning back assistant)
Lottery participation certi� cate
Company
Name, First name
Street, No.
Postal Code, Place
Phone
Cut out the participation card and give it to your specialized dealer. Or participate online on www.agria.de. Eligible are all people over 18 years. Each participant can participate in lottery only once. Legal process and cash payment are excluded. Collaborators of Agria may not participate. The winners agree to publication of name and photo, All participants agree with those participation terms. Good luck!
Due
to c
ontin
uous
dev
elop
men
t, w
e ha
ve to
rese
rve
the
right
to c
hang
e th
e sc
ope
of d
eliv
ery
in fo
rm, t
echn
olog
y an
d eq
uipm
ent.
Ther
efor
e, fr
om s
peci
¡ cat
ions
and
imag
es in
this
cat
alog
ue, t
here
fore
, no
clai
ms
can
be d
eriv
ed. W
e as
sum
e no
liab
ility
for p
rintin
g er
rors
.A
gria
-Wer
ke G
mbH
• Bi
ttel
bron
ner S
traß
e 42
• D
-742
19 M
öckm
ühl
Tel.
+49(
0)62
98/3
9-0
• Fax
+49
(0)6
298/
39-1
11 •
info
@ag
ria.
de •
ww
w.a
gria
.de
2nd price
agria 7100 Cleanstar compact amounting to € 2.280,– incl. VAT
3rd price
agria Cleanbaby amounting to € 370,– incl. VAT
1st price
agria 2200 Hydro including Sweeper 100 cm coarse amounting to € 6200,– incl. VAT
992
202
- 10/
2012
- 3.
000
- rc
Fina
l par
tici
pati
on: 3
0.03
.201
3