Post on 13-Sep-2020
transcript
Form No. 62-2004 (08/01/14) © 2014 Victor Technologies International, Inc. Printed in U.S.A. VictorTechnologies.com
U.S. Customer Care: 800-426-1888 Canada Customer Care: 905-827-4515 International Customer Care: 940-381-1212
INNOVAT ION TO SHAPE THE WORLD ™
AGRICULTUREAPPLICATION MODE – WEAR OR REPAIR PRODUCT PROCESS
Sweeps
Moderate Impact & Abrasion
Stoody BTS Borium (ATB)Stoody 31 Stoody 2134Stoody 965-G, 965-O, 965 AP-GStoody 964-G, 964-O, 964 AP-GStoody 966-G
OAW OAW SMAW SMAW GMAW, Open Arc, FCAW GMAW, Open Arc, FCAW GMAW
Low Impact & Abrasion
Vancar Stoody 965-G, 965-O, 965 AP-GStoody 964-G, 964-O, 964 AP-GStoody 966-G
SMAW, GMAW, Open Arc GMAW, Open Arc, FCAW GMAW, Open Arc, FCAW GMAW
Chisel Points Moderate Impact & Abrasion
Borium (ATB) Stoody 965-G, 965-O, 965 AP-GStoody 964-G, 964-O, 964 AP-GStoody 966-G
OAW GMAW, Open Arc, FCAW GMAW, Open Arc, FCAW GMAW
Ammonia Injector Feet Low Impact & Abrasion
Borium (ATB) Vancar Stoody 965-G, 965-O, 965 AP-GStoody 964-G, 964-O, 964 AP-GStoody 966-G
OAW SMAW, GMAW, Open Arc GMAW, Open Arc, FCAW GMAW, Open Arc, FCAW GMAW
Grain Mill Hammers Medium Impact & Abrasion
Borium (ATB) TB-2954 Stoody 965-G, 965-O, 965 AP-GStoody 964-G, 964-0, 964 AP-GStoody 966-G
OAWOAWGMAW, Open Arc, FCAWGMAW, Open Arc, FCAWGMAW
EARTH MOVING – CONSTRUCTIONIdler Rolls Metal to Metal ThermaClad 42 SAW
Track Rollers, Rails, Sprockets Metal to Metal
Stoody 105B ThermaClad 42 Super Build Up-GSuper Build Up-O
SAWSAW GMAW Open Arc
Sprockets, Gear Teeth Metal to Metal Stoody 1105 Stoody 105-G, 105-O
SMAW GMAW, Open Arc
Ripper Shanks Moderate Impact & Abrasion
Stoody XHC Stoody 101HC-G, 101HC-OStoody 964-G, 964-O, 964 AP-G
SMAW GMAW, Open ArcGMAW, Open Arc, FCAW
Dozer Teeth, Bucket Lips & Teeth
Moderate Impact & Abrasion
Stoody 31 Stoody 35 Stoody 2134 Stoody XHCStoody 600 Stoody 964-G, 964-O, 964 AP-G
SMAWSMAW SMAW SMAW Open ArcGMAW, Open Arc, FCAW
Low Impact & High Abrasion
Stoody 35 Stoody XHCStoody 101HC-G, 101HC-O
SMAW SMAW GMAW, Open Arc
Low Impact & Severe Abrasion
VancarStoody 130Stoody 160FC
SMAW, GMAW, Open ArcOpen ArcGMAW
DREDGING
Pump HousingsLow Impact & Abrasion Stoody 100HD
Stoody CP-2000Open Arc Open Arc
High Impact Stoody 117 Stoody 31
Open Arc SMAW
Pump Seals, Impellers Moderate Impact & Abrasion Stoody 117 Stoody 31
Open Arc SMAW
Rotary Cutter Teeth High Stress Abrasion Stoody 160FC Stoody 160-E
GMAW SMAW
CEMENT
Raw Material Pulverizing Mill
Moderate Impact & High Abrasion
Stoody 100 HC Stoody CP-2000 Stoody CP-2001 Stoody 100HD
Open ArcOpen ArcOpen ArcOpen Arc
Pulverizing Rolls, Tables Low Impact & High Abrasion Stoody CP-2000 Open Arc
Feed Screw Flights High AbrasionStoody CP-2000 Stoody 130 Stoody 160FC
Open ArcOpen Arc GMAW
High Pressure Clinker RollsHigh Pressure & Abrasion Stoody 600 Open ArcBuild Up ThermaClad Roll Build 3 SAW
Mill Paddles Moderate Impact & Abrasion
Stoody 35 Stoody XHC Super 20 Stoody CP-2000 Vancar
SMAW SMAW SMAW Open Arc SMAW, GMAW, Open Arc
RECYCLINGTire Shredding Knives High Stress, Metal to Metal Stoody M7
Stoody 964-G, 964-O, 964 AP-GGMAW GMAW, Open Arc, FCAW
Tub Grinders High Stress Abrasion Vancar Stoody 121-G, 121-O
SMAW, GMAW, Open Arc GMAW, Open Arc
Rotor Disc Car Crusher High Impact Stoody 2110 Stoody 110-G, 110-O
SMAW GMAW, Open Arc
Alligator Shears, Labounty Shears High Stress, Metal to Metal Stoody 1102
Stoody 102-G, 102-OSMAW GMAW, Open Arc
Grapples High Impact, Metal to MetalStoody 965-G, 965-O, 965 AP-GStoody 964-G, 964-O, 964 AP-GStoody Self-Hardening (SHIP)
GMAW, Open Arc, FCAWGMAW, Open Arc, FCAWSMAW
MINING
Dragline Bucket, Shovel Tips High Stress Abrasion
Stoody XHC Stoody 160-E Stoody CP-2000 Stoody 160FC
SMAW SMAW Open Arc GMAW
Tunneling, Boring Low Impact & Severe Abrasion
Stoody 160-E Vancar Stoody 160FC
SMAW SMAW, GMAW, Open Arc GMAW
Conveyor Pipes High Abrasion
Stoody CP-2000 Stoody 160FC Stoody PC2009Stoody PR2009
Open ArcGMAW Open Arc Open Arc
Augers High Abrasion
Stoody 101HC-G, 101HC-OStoody CP-2000 Stoody 160FCStoody 160-E Super 20
GMAW, Open Arc Open Arc GMAWSMAW SMAW, Open Arc
Cable Sheaves Metal to Metal ThermaClad 42 ThermaClad 102
SAW SAW
Dragline Pins Metal to Metal Stoody 102 SAW
POWER GENERATIONAPPLICATION MODE – WEAR OR REPAIR PRODUCT PROCESS
Roller Crushers, Grinding Rings – Coal
Low Impact & High Abrasion
Stoody 100HD Stoody CP-2000 Stoody CP-2001
Open Arc Open Arc Open Arc
Rotary Vein Wheels High Abrasion
Stoody CP-2000 Stoody 160FCVancar Super 20
Open Arc GMAW SMAW, GMAW, Open Arc SMAW, Open Arc
Mill Liner Plates High AbrasionStoody CP-2000 Stoody 101HWP Stoody 101HD
Open Arc Open Arc Open Arc
Clinker Grinders High Abrasion Stoody 600 Open Arc
Elbows, Rotary Veins Low Impact & High Abrasion
Stoody 35Stoody CP-2000Stoody 160FC
SMAW Open Arc GMAW
Steam Valves High Temperature, Metal to Metal
Stoodite 6 / Stoodite 6-M Stoodite 21 / Stoodite 21-M
GTAW, GMAW, Open ArcGTAW, GMAW
QUARRIES – CRUSHING
Roll Crusher RollersBuild Up / Repairs Stoody 110-G, 110-O
Stoody 2110GMAW, Open ArcSMAW
Build Up / Hardface Stoody 117 Stoody 100HC
Open Arc Open Arc
Rotors, Impeller Bars Build Up / Manganese / Carbon Steel
Stoody 110-G, 110-O Stoody 2110
GMAW, Open ArcSMAW
Crusher Hammers Moderate Impact & Abrasion Stoody 2134 Stoody 134-G, 134-O
SMAW GMAW, Open Arc
Jaw Crusher - JawsModerate Impact & Abrasion Stoody 134-G, 134-O GMAW, Open ArcHigh Impact & Abrasion Stoody 600 Open Arc
Joining Joining Manganese to Carbon Steel
Stoody 110-G, 110-O Stoody 2110
GMAW, Open ArcSMAW
Various Hammers Low Impact & High AbrasionVersalloy Plus Stoody 21 Stoody 121-G, 121-O
SMAW, GMAW SMAWGMAW, Open Arc
Worn Cones, Mantles
Repairs Stoody 110-G, 110-O Stoody 2110
GMAW, Open ArcSMAW
Build Up & HardfaceStoody 117 Stoody 100HCStoody CP-2000
Open Arc Open Arc Open Arc
New Cones, Mantles Moderate Impact & High Abrasion Stoody 100HC Open Arc
STEELRoll Build Up ThermaClad 8620
ThermaClad Roll Build 3SAW SAW
Continuous Casters Corrosion, Thermal Fatigue & Abrasion
ThermaClad 423 SOS 423
SAW Open Arc
Pinch Rolls Abrasion, Thermal Resistance ThermaClad 443 SAWCold Rolling, Bell Seats Abrasion ThermaClad 102 SAW
Burden Area, Guides, Bell Abrasion
Stoody 103 Stoody 100HD Stoody CP-2000
SAW Open Arc Open Arc
LOGGING / PULP / PAPER
Debarking Hammers Medium Impact & Abrasion
Stoody 33 Stoody 160FC Vancar
SMAW GMAW SMAW, GMAW, Open Arc
OIL & GAS UPSTREAM
Earth Moving / Ground Engaging Abrasion & Impact
Stoody XHC Super 20 Stoody 101HC Stoody CP-2000 Vancar Stoody 101HWP
SMAW SMAW, Open Arc GMAW, Open ArcOpen ArcSMAW, GMAW, Open ArcOpen Arc
Pipe I.D. Cladding, Elbow I.D. Cladding Slurry Abrasion, Corrosion
Stoody 160-E Stoody 160FC Stoody PC2009 Stoody PR2009 StoodCor 136 Stoody CP-2000
SMAW GMAW Open ArcOpen ArcOpen ArcOpen Arc
Down Hole Tooling, Tool Joint Repair Build Up, Tool Joint Repair Stoody 155FC
Stoody ThermaClad 104TJGMAW SAW
Down Hole Tooling, Hardfacing / Hardbanding Abrasion
Stoody 160-E Stoody 160FCStoody 160DM Stoody HB-56 Stoody HB-62Stoody HB-TI Stoody HB-NoMag
SMAW GMAWGMAW, Open ArcGMAW GMAW Open Arc GMAW
OIL & GAS MIDSTREAM
Pipe I.D. Cladding, Elbow I.D. Cladding Slurry Abrasion, Corrosion
Stoody PC2009 Stoody PR2009 StoodCor 136 Stoody CP-2000 Stoody 160FC
Open ArcOpen ArcOpen ArcOpen ArcGMAW
Valves Slurry Abrasion, CorrosionStoodite 6 / Stoodite 6-MStoodite 12 / Stoodite 12-MStoodite 21 / Stoodite 21-M
GTAW, GMAW, Open Arc GTAW, GMAW GTAW, GMAW
LNG Tanks, Cryogenic Joining (9% Nickel Steel), High Alloy Clad Lines
Joining Stoody 625-T1Stoody 625LI-T1
GMAWGMAW
OIL & GAS DOWNSTREAM
Valves CorrosionStoodite 6 / Stoodite 6-MStoodite 12 / Stoodite 12-MStoodite 21 / Stoodite 21-M
GTAW, GMAW, Open Arc GTAW, GMAW GTAW, GMAW
Pump Parts Corrosion Stoodite 12 / Stoodite 12-M GTAW, GMAWDuplex Stainless Steel Joining Applications Joining Brilliant 2209 T-1 AP
Brilliant 2594 T-1 APGMAW GMAW
LNG Tanks, Cryogenic Joining (9% Nickel Steel), High Alloy Clad Lines
Joining Stoody 625-T1 Stoody 625LI-T1
GMAWGMAW
RECOMMENDED PRODUCTS BY INDUSTRY & APPLICATION
Stoody.com
SIGNATURE PRODUCTS HARDFACING ALLOYS
QUICK REFERENCE PRODUCT GUIDE
We’ve Got You Covered™
FCAW – Flux Cored Arc Welding GMAW – Gas Metal Arc Welding (MIG) GTAW – Gas Tungsten Arc Welding (TIG) OAW – Oxyacetylene Welding
Open Arc – Open Arc Welding SAW – Submerged Arc Welding SMAW – Shielded Metal Arc Welding (Stick)
PROCESS KEY
PROCESS AVAILABLE SIZES
Product Base Metal Wear Mode / General Use SMAW GTAW FCAW GMAW OPEN
ARC SAW Electrodes Wire Applications (Partial Listing)
BUIL
D UP
& JO
ININ
G AL
LOYS
Stoody Build Up Carbon Steel Build Up ■ ■
0.045" (1.2 mm) 1/16" (1.6 mm)3/32" (2.4 mm)7/64" (2.8 mm)
Hammers, Wheel Burns, Repairing Battered Rail, Steel Mill Wobblers & Pods, Carbon Steel Shovel Pads, Shafting, Rolls, Pump Parts
Stoody Build UP LH Carbon Steel Build Up ■
1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 18"
Tractor Rollers, Steel Shovel Parts, Tractor and Shovel Idlers, Gear Teeth, Sprockets, Shafts
Nicromang Manganese Steel Build Up & Joining ■ ■ ■
1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 18" 5/16" (8.0 mm) x 18”
3/32" (1.2 mm) 7/64" (1.6 mm)
Dipper and Tooth Build Up, Crusher Rolls, Dredge Pump Parts, Rolling Mill Couplers, Rolling Mill Spindles, Crusher Jaws, Impact Breaker Bars, Hammer Mill, Shovel Pads, Railroad Frogs
Dynamang Manganese Steel Build Up ■ ■ ■
1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 18"
0.045" (1.2 mm) 1/16" (1.6 mm)7/64" (2.8 mm)
Earth Moving Equipment, Bucket Lips, Crusher Jaws, Crusher Rolls, Gyratory Crushers
Stoody 110 Carbon & Manganese Steel Build Up & Repair ■ ■
0.045" (1.2 mm) 1/16" (1.6 mm) 3/32" (2.4 mm)7/64" (2.8 mm)
Drive Tumblers, Shovel Pads, Shovel Teeth, Turbine Cone, Wobbler Feeder, Manganese Frogs, Crusher Rolls
Stoody 2110 Carbon & Manganese Steel Build Up & Repair ■
1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 18"
Shovel Pads, Roll Crushers, Hammers, Shovel Teeth, Grate Bars, Carbon Steel Frogs, Switch Points, Manganese Rail Components
Versalloy Plus Carbon & Manganese Steel Build Up, Repair & Joining ■
3/32" (2.4 mm) x 14"1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"
General Purpose Joining of Stainless Steels to Other Alloys; Cushioning Layer for Hardfacing Alloy Overlays
Versalloy AP-G Carbon & Manganese Steel Build Up, Repair & Joining ■
0.045" (1.2 mm) 1/16" (1.6 mm) Joining Stainless Steel to Other Alloys
Castweld 55 Cast Iron Joining, Build Up & Repair ■ ■ ■ ■
3/32" (2.4 mm) x 14"1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"
0.045" (1.2 mm) 1/16" (1.6 mm)3/32" (2.4 mm)
Joining, Build Up of Cast Iron Parts - Pump Housings, Pump Impellers, Engine Blocks, Castings
Castweld 99 Cast Iron Joining, Build Up & Repair ■ ■
3/32" (2.4 mm) x 14" 1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"
3/32" (2.4 mm) Repair of Cast Iron, Particularly Hairline Cracks and Casting Defects
MET
AL T
O M
ETAL
ALL
OYS
Stoody Super Build Up-G, Stoody Super Build Up-O Carbon & Low Alloy Steel Metal to Metal Wear ■ ■
0.045" (1.2 mm) 1/16" (1.6 mm)3/32" (2.4 mm)
Gear Teeth, Sprockets, Steel Shovel Pads, Overlaying Carbon Steel Shafts
Stoody 1105 Carbon & Low Alloy Steel Metal to Metal Wear ■1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"
Tractor Rollers and Idlers, Idler Sprockets, Drive Tumblers, Churn Drills
Stoody 105-G Stoody 105-O Carbon & Low Alloy Steel Metal to Metal Wear ■ ■
1/16" (1.6 mm)3/32" (2.4 mm)
Tractor Rollers, Undercarriage Parts, Shovel Idlers and Rollers, Shovel House Rolls (Hook Rolls), Top Carrier Rolls, Crane Wheels, Mine Car Wheels
Stoody 1102 Carbon & Low Alloy Steel Metal to Metal Wear ■1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"
Cable Sheaves, Forging Dies, Crane Wheels, Hot and Cold Shear Blades, Drill Pipe Hard Banding, Hot Work Extrusion Rolls
Stoody 102-G Stoody 102-O Carbon & Low Alloy Steel Metal to Metal Wear ■ ■
0.045" (1.2 mm)1/16" (1.6 mm)
Cable Sheaves, Hot and Cold Shear Blades, Forging Dies, Drillpipe Hardbanding, Crane Wheels, Hot Work Extrusion Rolls
TEMP
ERAT
URE,
ABR
ASIO
N, C
ORRO
SION
Stoodite 6 Stoodite 6-M Stoodite 6-S
Carbon & Low Alloy Steel, Stainless Steel
High Temp, Abrasion, Corrosion
Resistance
■ ■ ■ ■ ■1/8" (3.2 mm)5/32" (4.0 mm)3/16" (4.8 mm)
0.045" (1.2 mm) 1/16" (1.6 mm)3/32" (2.4 mm)
Sintering Machine Seat, Covers, Flapper Gates, Valves & Seats, Coke Pusher Shoes, Cooling Bed Rolls, Hot Trimming Dies, Forging Die Blocks, Chain Saw Guide Bars, Blow Valves, Pulp Digester, Plastic Extrusion Screws / Flights of Extrusion Screws, Sinker Roll Bushings, Soaking Pit Tong Bits, Shafts
Stoodite 21 Stoodite 21-M Stoodite 21-S
Carbon & Low Alloy Steel, Stainless Steel
High Temp, Abrasion, Corrosion
Resistance
■ ■ ■ ■
1/8" (3.2 mm)5/32" (4.0 mm)3/16" (4.8 mm) 1/4" (6.4 mm)
0.045" (1.2 mm) 1/16" (1.6 mm)
Hot Forming Dies, Valves and Seats, Turbine Runners / Fluid Valve Seats, Tube Mill Piercing Plugs, Hot Shears, Erosion Shields, Forging Dies
PROCESS AVAILABLE SIZES
Product Base Metal Wear Mode / General Use SMAW GTAW FCAW GMAW OPEN
ARC SAW Electrodes Wire Applications (Partial Listing)
MET
AL T
O EA
RTH
ALLO
YS -
MOD
ERAT
E AB
RASI
ON
Stoody 19 Carbon & Low Alloy Steel, Manganese Steel
Severe Abrasion, Low Impact ■
1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 18"
Crusher Rolls, Dredge Pump Shells, Impellers, Impact Breaker Bars, Scrappers
Stoody 31 Carbon & Manganese Steel Moderate Abrasion, Moderate Impact ■
1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 18"
Bucket Arms, Chain Links, Rolling Mill Guides, Pulleys, Scrapers, Buckets, Blades
Stoody Self Hardening (SHIP)
Carbon & Low Alloy Steel, Manganese Steel
Metal to Metal Wear ■1/8" (3.2 mm) x 14"5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"
Churn Drills, Trailer Hitches, Machine Components, Bearings, Sliding Metal Parts
Stoody 965-G Stoody 965-O, Stoody 965 AP-G
Carbon & Low Alloy Steel, Manganese Steel
Moderate Abrasion, High Impact ■ ■ ■
0.035" (0.9 mm)0.045" (1.2 mm) 1/16" (1.6 mm)
Tillage Tools, Dredge Parts, Sliding Metal Parts, Tire Shredding Knives, Drag Line Bucket Lips, Extruder Screws, Tamper Feet, Churn Drills, Muller Tires
Stoody 121-G Stoody 121-O
Carbon & Low Alloy Steel, Manganese Steel
Moderate to Severe Abrasion, Moderate Impact
■ ■
0.045" (1.2 mm) 1/16" (1.6 mm)3/32" (2.4 mm) 7/64" (2.8 mm)
Scraper Sides, Scraper Cutters, Vibrator Ditcher Shank, Post Hole Augers, Augers, Pug Mill Paddles, Tamper Tools
Stoody 964-G, Stoody 964-O Stoody 964 AP-G
Carbon & Low Alloy Steel, Manganese Steel
Moderate Abrasion, High Impact ■ ■ ■
0.045" (1.2 mm) 1/16" (1.6 mm)
Slitter Blades, Auger Flights, Rendering Screws, Tamper Tools, Extruder Screws, Tamper Feet, Tillage Tools, Dredge Parts, Drag Line Bucket Lips
Stoody 100HCCarbon & Low Alloy Steel, Manganese Steel
Severe Abrasion, Moderate Impact ■
3/32" (2.4 mm)7/64" (2.8 mm)1/8" (3.2 mm)
Gryatory Mantles, Cage Pins, Scrubbers, Crusher Rolls
Stoody 101HC-G Stoody 101HC-O
Carbon & Low Alloy Steel, Manganese Steel
Severe Abrasion, Low Impact ■ ■
3/32" (2.4 mm)7/64" (2.8 mm)1/8" (3.2 mm)
Gryatory Mantles, Cage Pins, Scrubbers, Crusher Rolls
Stoody 970-GCarbon & Low Alloy Steel, Manganese Steel
Severe Abrasion, Low Impact ■
0.045" (1.2 mm) 1/16" (1.6 mm) Non-Chromium Wire, Agriculture, Quarry, Mining
Stoody CP-2000
Carbon & Low Alloy Steel, Manganese Steel, Cast Irons (Special Rebuilding Applications)
Severe Abrasion, Low Impact ■
0.045" (1.2 mm) 1/16" (1.6 mm)5/64" (2.0 mm)7/64" (2.8 mm)1/8" (3.2 mm)
I.D. Pipe and Elbow Cladding, Hardface Plate Cladding, Gyratory Mantles, Coal and Cement Pulverizer Rolls and Grinding Rings (Multi-Layer Build Up)
Stoody CP-2001
Carbon & Low Alloy Steel, Manganese Steel, Cast Irons (Special Rebuilding Applications)
Severe Abrasion, Low Impact ■
1/16" (1.6 mm) 7/64" (2.8 mm)1/8" (3.2 mm)
I.D. Pipe and Elbow Cladding, Hardface Plate Cladding, Gyratory Mantles, Coal and Cement Pulverizer Rolls and Grinding Rings (Multi-Layer Build Up)
MET
AL T
O EA
RTH
ALLO
YS -
EXTR
EME
ABRA
SION
Stoody 130 Carbon & Low Alloy Steel Extreme Abrasion, Low Impact ■
1/16" (1.6 mm)7/64" (2.8 mm)
Scoop Lips and Teeth, Ripper, Muller Plows, Augers, Pug Mill Knives, Chisel Plow, Ammonia Injectors, Auger Flights, Cultivator Chisels, Ditcher Teeth, Swing Hammers, Ensilage Knife, Raymond Mill Plows, Tillage Tools
Acetylene Tube Borium (ATB Bare) Carbon & Low Alloy Steel Extreme Abrasion,
Low Impact Oxy-Acetylene
7/64" (2.8 mm) x 28"1/8" (3.2 mm) x 14"1/8" (3.2 mm) x 28"5/32" (4.0 mm) x 14"5/32" (4.0 mm) x 28"3/16" (4.8 mm) x 14"1/4" (6.4 mm) x 14"
Plow Shares, Cane Knives, Teeth, Tool Drill Bits
Vancar Carbon & Low Alloy Steel Extreme Abrasion, Low Impact ■ ■ ■
5/32" (4.0 mm) x 14"3/16" (4.8 mm) x 14"
1/16" (1.6 mm)3/32" (2.4 mm)
Ripper Shanks and Teeth, Dozer End Bits, Auger Bits, Tiller Tines, Dry Cement Pump Screw, Ammonia Injector, Pug Mill Knife, Cultivator Chisel
Stoody 155FC Carbon & Low Alloy Steel Build Up & Repair ■ 1/16" (1.6 mm)Well Suited for Build Up or Buffer Layers under Tungsten Carbide Hardfacing, Process Screw Flight Edges, Drill Bits and Stabilizers, Hardbanding (Open Hole)
Stoody 160FC Carbon & Low Alloy Steel Severe Abrasion, Low Impact ■ 1/16" (1.6 mm)
Dredge Rotary Cutter Heads, Slurry Elbows & Reducers, Centrifuges, Drill Bits and Stabilizers, Hardbanding (Open Hole), Brick Plant Extruders, Pug Mills, Anode Paste Mixer Components, Dry Cement Pump Screws, Oil Sands Crushers, Sizers, and Shovel Latch Bars
Stoody.com
We’ve Got You Covered™
Signature Products Hardfacing Alloys
PROCESS KEY FCAW – Flux Cored Arc Welding | GMAW – Gas Metal Arc Welding (MIG) | GTAW – Gas Tungsten Arc Welding (TIG) | OAW – Oxyacetylene Welding | Open Arc – Open Arc Welding | SAW – Submerged Arc Welding | SMAW – Shielded Metal Arc Welding (Stick)
Q U I C K R E F E R E N C E G U I D E