SunStay Installation Instructions

All in one solar streetlight

IP-65ta35

Dimensions

369

68

4

769

3883

156

Precaution:1. Maximum installation height luminaire from gorund is 5meters.2. Before installation check if luminaire is glowing by pressing the switch on housing.3. After three months of manufacturing, check if luminaire is the glowing (by switch), if it is not working then contact customer care.4. This luminaire will not operate below 0 degree ambient.

10.5 Kg (3000 lumen)

Remove shrink wrap and protective cover before installation.

For vertical mounting unscrew and removepole mounting bracket and assemble it asshown in Fig. B.

For tilt mounting to suit various geography, luminaire can be tilt mounted from 0 to 15 deg

Mount the luminaire with pole, tighten the bolts with torque of 8 Nm.

Horizontal Mounting

Vertical Mounting

For accurate angle positioning, match polemarks mounting piece marking with luminaire marking

To switch ON the luminaire press the switch button shown in below �gure.

Switch

0°-15°

Fig. B

Fig. A

Shrink wrap

Protectivecover

Pole Dia:50 to 60mm

5° 10°

15°

0°

1

4

2

3

5 6

Speci�cations

Type

Net Weight

Lamp

IP Classi�cation

Voltage

Max. Projected Area

Application

PIR Sensor

Battery Type

Luminiare CCT

Solar Street Light

BRP710

LED(2000 lumen)

12 V DC

IP 65

9 Kg (2000 lumen

0.286 m²

LiFePO4

Available

5000 K- 6500 K