Post on 13-Jun-2020
transcript
Albeo™ LED LuminaireLED High Bay LightingABV3 - A Series
The Albeo™ ABV3 LED A Series luminaire is an exceptional mixture of value and performance. Ideal for high bay and low bay applications in industrial and commercial buildings. Designed to replace 250W-850W HID and four-to eight-lamp T5/T8 HIF fixtures with unmatched reliability and quality.
Product Description:
Project name _________________Date ________________________Type ________________________
Product Dimensions:
Light Output Range: 12,000 – 48,000 lumensCRI: 70CCT: 4000K, 5000K Distributions: 120°, 90° open with diffused & clear lens optionsInput Voltage: 120V-277V, 347V, & 480VEfficiency: 160 LPW typical Fixture Rated: L70 @ 100,000 hours min.Limited Warranty: 5 YearsTemperature Rating: –30°C to +40°C (-22°F to 104° F) Controls & Sensors: 0-10V standard, Motion & daylight sensor options.
Performance Highlights:
Max. Weight: 20 lbs
27.30"
Max. Weight: 10 lbs
13.75"
10.88"
3.46"
Max. Weight: 30 lbs
40.85"
12,000 - 24,000lm 1S-Module
Side View
48,000lm 2S-Module
Max. Weight: 10 lbs.
Max. Weight: 20 lbs.
13.75 in.
27.30 in.
3.46 in.
10.88 in.
Product Images:
15.58 in.
3.46 in.
15.58 in.
3.46 in.
Side View
Certifications:
A B V 3 A Q W 1 P K_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
PRODUCTID VOLTAgE
0 = 120/2771 = 120* 4 = 277*D = 347* 5 = 480* *Specify single voltage if plug, sensor, or wireless needed.
12 = 12,00018 = 18,00024 = 24,00048 = 48,000
70 Plus CRI47 = 4000K57 = 5000K
LED COLORTEMP
Clear Lens: 1C = 120° Clear Lens9C = 90° Clear Lens
Diffused Lens: Maximum Glare Reduction1D = 120° Diffused Lens9D = 90° Diffused Lens
Open Optic: 1Q = 120° No Lens9Q = 90° No Lens
OPTICS/LENS
V = 0-10V DimmingQ = Non-dimming
CONTROL WIRINg
ABV3 = Albeo Highbay ABV 3rd Gen
LUMENOUTPUT
PERFORMANCELEVEL
A
Ordering Number LogicIndustrial High Bay & Low Bay LightingABV3-Series - Stock & Flow Edition
SENSOR/WIRELESS
Q = NoneA = Occ Sense On/Off 360° LSXRB = Occ Sense High-Low Dimming 360° LSXRP = Daylight Sense w/ Occupancy On/Off LSXR
W = White Powder Coat
1PK = Single Pack *Battery Backup for 120-277V sold seperately
PLUg FINISH OPTIONS
ST = Standard22 = 1/2” Threaded
rod mount kitSM = Surface Mount *Rod and nuts not included 23 = 3/4” Pendant
Mount Kit 3/4”*Conduit not included41 = Y-Cable/
Hook 5 ft.42 = Y-Cable/
Hook 10 ft.43 = Y-Cable/
Hook 15 ft.44 = Y-Cable/
Hook 20 ft.
MOUNTINg CORD
K = Knockout A = 6 ft. 18ga
cord
Q = None
705000K 100%
4000K 100%
1C 120° Clear Lens 100%
9C 90° Clear Lens 98%
1D 120° Diffused Lens 95%
9D 90° Diffused Lens 93%
1Q 120° No Lens 102%
9Q 90° No Lens 100%
CRI
OPTIC LENS CODE
CCT
OPTIC DESCRIPTION
OUTPUT MULTIPLIER
OUTPUT
*All packages are 40°C rated max ambient. Lumens shown with Clear Lens 120° “1C” Optic
12 A 11,700 68 70 172 1S
18 A 17,300 109 110 159 1S
24 A 23,400 162 168 142 1S
48 A 46,500 330 341 141 2S
LUMENPACKAgE
OUTPUTLEVEL
TyPICAL DELIVERED
LUMENS
TyPICAL LPW
120-277V
MODULEBODy347/480V120-277V
TyPICAL POWER
70 CRI @ 4000K OR 5000K CCT
Project name _________________Date ________________________Type ________________________
All trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. Current, powered by GE is a business of the General Electric Company. © 2019 GE.
www.LED.com ALB070 (Rev 07/22/19)