Post on 01-Apr-2019
transcript
Temperature measurement
Aluminum head with threaded
| 1 |
Aluminum head with threaded connection M20x1.5Thread 10mm long; Neck tube 100mm, D = 10x1mmwithout built-in temperature head transmitters, without base
Technical data
Threaded connection: M20x1,5
Thread: 10 mm lang
Neck tube: 100 mm lang
D: 10 x 1 mm
Temperature head transmitter: ohne
Base: ohne
Material Sensor: 1.4571
Material connection head: Alu
Order code
RTD- 0 0 0 9 90 1 4 1
Aluminum head with threaded connection
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
RTD-LTN-500
| |
Signal converter Pt100 on 4...20 mA for connecting in between in the sensor line
• Compact design• Easy to upgrade• M12 connectors• High accuracy
Technical data
Sensor input: Pt-100 4-wire (2 and 3-wire possible with bridges) M8 connector
Output: Analog 4 ... 20mA; 20 ... 4mA; M12 connector
Supply voltage: 10 ... 35 V DC
Delay time: 2 s
Total accuracy: 0,1 K or 0.08%
Long term stability: <0.1 K / year
Ambient temperature: -40 ... + 85 ° C
Storage temperature: -40 ... + 100 ° C
EMC: Immunity and Emissions according to EN 61 326-1 (IEC 1326)
pin assignment Pt100 plug M8
red
whi
te
blue
/ r
ed
blue
7 w
hite
Pt100
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-LTN
| |
Sta
nd:
P001
-0-2
01.E
N
A variation for Ex-free range
connection typeY Input (Pt100) M8-female; Output (4...20 mA) M12-femaleY others
sensor typeA Pt100 4-wire / 4...20 mA
confugurationA standard factory setting Pt100 / 0...100°CB (please specify measuring range!)
Order code
RTD-LTN-500 A A S
RTD-LTN
4 3
1 210...30 V DC(4...20 mA)
0 V(4...20 mA)
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTA
| |
Sta
nd:
P001
-05-
2018
.EN
sensor type1 1x Pt100, 2-wire2 1x Pt100, 3-wire (preferred type)3 1x Pt100, 4-wire4 2x Pt100, 2-wire (Doppel Pt100 with changeable measuring insert only from ø 8 mm)5 2x Pt100, 3-wire (Doppel Pt100 with changeable measuring insert only from ø 8 mm)6 1x Pt1000, 3-wire7 3x Pt100, 2-wire (3x Pt100 with changeable measuring insert only from ø 8 mm)
accuracy (price x 2 at double Pt100)B class B, up to +300°C (preferred type)A class A, up to +300°CC class AA (formerly class 1 3 B), up to +300°CY special version e.g. high temperature etc.P class AA (formerly class 1 3 B), paired versions for e.g. heat quantity measurement . . . .
process connection1 male thread G½" (preferred type)2 male thread G1"3 male thr5 union nut G¾"J F E Y other process connections
material, sensor diameter, process side T 1.4571 / 3 mmU 1.4571 / 5 mmK 1.4571 / 6 mmN 1.4571/ 8 mm (preferred type)L 1.4571 / 10 mmW 1.4571 / 12 mmP 1.4571 / 6 mm, reduced head 4 mm; 40 mm longM 1.4571 / 8 mm, reduced head 5 mm; 40 mm longO 1.4571 / 10 mm, reduced head 6 mm; 40 mm longR 1.4571 / 8 mm, reduced head 3 mm; 40 mm longY andere
neck tubeA without neck tube (preferred type)B with neck tube (standard L2 =100 mm) (preferred type)Y with neck tube upon request in mm
connection headA PP-head smallB PP-head big1 plastic head Delrin® small2 plastic head Delrin® big (preferred type)3 aluminium head small (not with sensor type 5 and 7)4 aluminium head big5 steel head big7 PTFE-head small8 PTFE-head bigG aluminium head double sizedY others
measurement insertF (preferred type)W changeable
connection typeK connection with terminal socket (preferred type)M X connection headtransmitter UTN-500 software programmable T connection for headtransmitter PTN-600 PROFIBUS PA-interfaceD connection with wire ends for installation of headtransmitterV 5-pole M12-plugG connection for 2x headtransmitterL connection with 2x terminal socketY special version
length L1 sensor in mm(preferred lengths: 50 | 100 | 150 mm)
length L2 neck tube in mm(preferred length 100 mm)
order code
RTD-PTA mm mm
measuring trans-ducer only
possible with headtransmitter
“big”
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| |
Pt100 resistance thermometer
Basics of Hein Lanz Universal RTD form standardized, high-grade platinum measuring resistors with a nominal resistance of 100 ohms at 0 ° C, the tolerance classes AA, A, B - IEC 60751st
Hein Lanz Pt100 sensors are characterized byhigh accuracy and reproducibility and are extremely reliable.The sensing elements are embedded in the protective tube with magnesium oxide and hermisch closed. Thus, a good heat transfer and vibration protection is obtained.Standard measuring temperatures are -70 ° C. .. +300 ° C;High temperature versions measure upto +500 ° C / +600 ° C. Lowtemperature versions, specialmaterials, process connections andOEM versions are also available.The given measuring temperaturerefers to a medium temperature at theprobe tip.
For cable versions, for example PTS / PTC and PT100 sensors with connection head, possibly with built-in head transmitter, must be made to the respective maximum temperature of
the cable, heads, etc. by use of on-site isolation or Pt100 with neck tube into consideration.The measured speed of the individual Pt100 sensor is highly dependent on the operating conditions, the medium to be measured and the mechanical dimensions.The immersion depth should not be less than 50 mm. Shorter probe lengths, please always check with the experienced Hein Lanz employees.
Technical data
Measuring element: Platinum resistance element Pt100 / Pt1000, others on request
Temperature ranges: at the tip: -70 ° C. .. +300 ° C ; +500 ° C / +600 ° C and low temperature version on request
Tolerenzklasse: AA, A, B - IEC 60751
Signal:
- 1x Pt100: 2 -, 3 -, 4-wire circuit
- 2x Pt100: in 2x 2x 2-wire or 3-wire circuit
- Pt100 3x: 3x in 2-wire circuit
- Free wire ends for self-installation of a head transmitter- Head Transmitter, 4 .. 20mA / 0 .. 10V output, standard, Ex,
Connections:- terminal compartment in aluminum, plastic or stainless steel housing- Fixed connection cable - shielded PTFE, silicone, PVC,
Fiberglass with steel mesh, others on request ; - Lemo System, M12 system
Materials
Materials (process side):- protective tubes made of seamless stainless steel 1.4571 (AISI 316Ti)- Flanges, process connections: 1.4571 (AISI 316 Ti)- Special materials on request
Materials (connection side): - Housing: aluminum, stainless steel, polypropylene PP,POM polyoxymethylene ; - Cable Material, see "Connection"
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTB
| |
Sta
nd:
P001
-05-
2018
.EN
sensor type1 1x Pt100, 2-wire2 1x Pt100, 3-wire (preferred type)3 1x Pt100, 4-wire
Accuracy (Pt100 in 2-fold price x 2)B Class BA class A (preferred type)
Process connection G ½“ (weld-see page 44)A weld for TEM-10 or TEM-11
(Weld-not included)Y other
Material measuring surfaceN 1.4571 (preferred type)Y other
neck tubeA without neck tube to +85 ° C (preferred type)B with neck tube made of stainless steel (standard L2 = 100 mm) up to +200 ° C alignedY with neck tube of choice in mm
typeB PP big head2 plastic head size of Delrin ®4 for valve plug DIN 436508 PTFE head largeY other designs
measuring insertG permanently mounted in version with neck tube made of stainless steel or valve plug
changeable at version without neck tube Version 2.0 (preferred type)
ConnectionK Connection with terminal block (preferred type)M X connection head transmitter UTN-500 software programmableT connector for head transmitter PTN-600 PROFIBUS PA interfaceD connector with wire ends for self-installation of head transmitterU with 1 m connection cableZ valve plug DIN 43650Y Special version
Probe length L1 in mm (contact sensor)Length 0015 mm
Neck tube length L2 in mm Neck tube made of stainless steel, Adjustable 110mm
other lengths on request
TEM - 10 TEM - 11closed open
order code
RTD-PTB mm mmF
2B
8
2B
8
Transmitter only with terminal head
„Large“ possible
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| |
standard diving sleeve resistance thermometer Pt-100with sliding sleeve
Fundamentals of Hein Lanz Universal RTD standardized, high-quality platinum resistance form of a nominal resistance of 100 ohms at 0 ° C, tolerance classes A, B, 1/3B (AA) - in accordance with DIN EN / IEC60751st.Hein Lanz Pt100 probes arecharacterized by high accuracy andreproducibility are made andextremely reliable. The sensingelements are embedded in theprotective tube with magnesium oxidepowder and sealed hermisch. Thus, agood heat transfer and vibrationprotection is achieved.
Standard measuring temperatures are -70 ° C. .. +300 ° C;High temperature versions +500 ° C /+600 ° C, low-temperature versions,special materials, special processconnections, OEM versions are alsoavailable.The given measuring temperaturerefers to an average temperature atthe probe tip.
With cable versions, for example PTS / PTK and Pt100 sensors with connection head, possibly with integrated head transmitter, must be based on the respective maximum
temperature of the cable, heads, etc., with on-site isolation, use of Pt100 be used with extension into account. The measurement speed of the individual Pt100 sensor is highly dependent on operating conditions, the measured medium and the physical dimensions.
The immersion depth should be not less than 50 mm. Shorter probe lengths clarify please always experienced with the Hein Lanz staff.
technical data
measuring element: Platinum resistance element Pt100/Pt1000, others by request
temperature ranges: at measurement tip: -70°C...+300°C+500°C/ +600°C and low temperatureversions by request
tolerance: AA, A, B - according to IEC 60751
signal type:
- 1x Pt100: in 2-, 3-, 4-wire-switsch
- 2x Pt100: in 2x 2-wire or 2x 3-wire-switch
- 3x Pt100: in 3x 2-wire-switch
- head transmitter, 4...20 mA/ 0...10 V output, Standard, Ex,
connection:- connection area made out of aluminium, plastic or stainless steel
glass silk protected with steel mesh, others by request- Lemo-plug system, M12 plug system
materials
materials (terms of process):- protection tubes made of seamless stainless steel: 1.4571 (AISI 316Ti)
- special materials by request
Materialien (terms of connection):- housing: aluminium, CrNi-steel, PP-polypropylene,POM-polyoxymethylene
- cable material -> see „connection“
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Dimensioned drawing and connection
| |
Sta
nd:
P001
-0-2
01.E
N
G
Sensor type1 1x Pt100, 2-conductor2 1x Pt100, 3-conductor(concessional type)3 1x Pt100, 4-conductor4 2x Pt100, 2-conductor (double Pt100 with exchangeable gauge slide only from ø 8 mm)5 2x Pt100, 3-conductor (double Pt100 with exchangeable gauge slide only from ø 8 mm)6 1x Pt1000, 3-conductor7 3x Pt100, 2-conductor (3x Pt100 with exchangeable gauge slide, only from ø 8 mm)
Accuracy class (at double Pt100 price x 2) (DIN EN 60751:2009-05)B class B, up to +300°C (concessional type)A class A, up to +300°CC class AA (formerly class 1 3 B), up to +300°CY special model e.g. high temperature et ceteraP class AA (formerly class 1 3 B), paired model, e.g. for heat quantity detection
Process connection, sensor diameter (please order sliding sleeve separately)
1 8 mm pipe diameter (concessional type)2 10 mm pipe diameter3 6 mm pipe diameter4 1.4571 / 8 mm, reduced cone point 5 mm, 40 mm lenght6 1.4571/ 10 mm, reduced cone point 6 mm, 40 mm lenght7 15 mm x 2 mmY others
Material process sideN 1.4571 (concessional type)O heat resistant steel 1.4841 up to 1100°CY others
0
connection headA PP-head smallB PP-head big1 plastic head Delrin® small2 plastic head Delrin® big3 aluminium head small (not with sensor type 5 and 7)4 aluminium head big (concessional type)5 stainless steel head big7 PTFE-head small8 PTFE-head bigG aluminium head double sizeY other construction forms
gauge slideF (concessional type)W exchangeable
connectionartK connection with Klemmsockel (concessional type)M connection for head transmitter(1) (VT) X connection head transmitter(1) UTN-500 programmable by softwareT connection for head transmitter PTN-600 PROFIBUS PA-interfaceD connection with wire ends for self-mounting of head transmitterG connection for 2x head transmitterL connection with 2x clamp socketY special model
lenght L1 sensor in mm(concessional lengths: 100 | 150 | 200 mm)
order code
RTD-PTF mm0
Measuring trans-ducer only possible
with connection head “big”
order code
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| 1 |
diving sleeves - resistance thermometer Pt-100with cushion measure element
technical data
measuring element: Platinum resistance element Pt100/Pt1000, others by request
temperature ranges: at measurement tip: -70°C...+300°C+500°C/ +600°C and low temperatureversions by request
tolerance: AA, A, B - according to IEC 60751
signal type:
- 1x Pt100: in 2-, 3-, 4-wire-switsch
- 2x Pt100: in 2x 2-wire or 2x 3-wire-switch
- 3x Pt100: in 3x 2-wire-switch
- head transmitter, 4...20 mA/ 0...10 V output, Standard, Ex,
connection:- connection area made out of aluminium, plastic or stainless steel
glass silk protected with steel mesh, others by request- Lemo-plug system, M12 plug system
materials
materials (terms of process):- protection tubes made of seamless stainless steel: 1.4571 (AISI 316Ti)
- special materials by request
Materialien (terms of connection):- housing: aluminium, CrNi-steel, PP-polypropylene,POM-polyoxymethylene
- cable material -> see „connection“
Fundamentals of Hein Lanz Universal RTD standardized, high-quality platinum resistance form of a nominal resistance of 100 ohms at 0 ° C, tolerance classes A, B, 1/3B (AA) - in accordance with DIN EN / IEC60751st.Hein Lanz Pt100 probes arecharacterized by high accuracy andreproducibility are made andextremely reliable. The sensingelements are embedded in theprotective tube with magnesium oxidepowder and sealed hermisch. Thus, agood heat transfer and vibrationprotection is achieved.
Standard measuring temperatures are -70 ° C. .. +300 ° C;High temperature versions +500 ° C /+600 ° C, low-temperature versions,special materials, special processconnections, OEM versions are alsoavailable.The given measuring temperaturerefers to an average temperature atthe probe tip.
With cable versions, for example PTS / PTK and Pt100 sensors with connection head, possibly with integrated head transmitter, must be based on the respective maximum
temperature of the cable, heads, etc., with on-site isolation, use of Pt100 be used with extension into account. The measurement speed of the individual Pt100 sensor is highly dependent on operating conditions, the measured medium and the physical dimensions.
The immersion depth should be not less than 50 mm. Shorter probe lengths clarify please always experienced with the Hein Lanz staff.
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTI
| |
Sta
nd:
P001
-0-2
01.E
N
orde
r se
nsor
-
4mm
4mm
sensor type1 1x Pt100, 2-wire2 1x Pt100, 3-wire (preferred type)3 1x Pt100, 4-wire4 2x Pt100, 2-wire (Doppel Pt100 with changeable measuring insert only from ø 8 mm)5 2x Pt100, 3-wire (Doppel Pt100 with changeable measuring insert only from ø 8 mm)6 1x Pt1000, 3-wire7 3x Pt100, 2-wire (3x Pt100 with changeable measuring insert only from ø 8 mm)
accuracy (price x 2 at double Pt100)B class B, up to +300°C (preferred type)A class A, up to +300°CC class AA (formerly class 1 3 B), up to +300°CY special version e.g. high temperature etc.P class AA (formerly class 1 3 B), paired versions for e.g. heat quantity measurement
Prozessanschluss1 male thread G½“ (for immersion capsule STHA/STHB/STHX) (preferred type)2 male thread G1“Y other process connections
material, measurement insert diameter, process side U 1.4571 / 5 mm (for STH with 6 mm inner diameter) (preferred type)Y andere
neck tubeA without neck tube (preferred type)B with neck tube (standard L2 =100 mm) (preferred type)Y with neck tube upon request in mm
connection headA PP-head small2 plastic head Delrin® big (preferred type)4 aluminium head big5 steel head bigG aluminium head double sizedY others
measurement insertW changeable
connection typeK connection with terminal socket (preferred type)M X connection headtransmitter UTN-500 software programmable T connection for headtransmitter PTN-600 PROFIBUS PA-interfaceD connection with wire ends for installation of headtransmitterV 5-pole M12-plugG connection for 2x headtransmitterL connection with 2x terminal socketY special version
length L1 sensor in mm(preferred lengths: 50 | 100 | 150 mm)
length L2 neck tube in mm(preferred length 100 mm)
order code
RTD-PTI mmW mm
Only pressure-tight with adjusted immersion capsule!
measuring trans-ducer only
possible with headtransmitter
“big”
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| 1 |
Screw-in Pt100
Basics of Hein Lanz Universal RTD form standardized, high-grade platinum measuring resistors with a nominal resistance of 100 ohms at 0 ° C, the tolerance classes AA, A, B - IEC 60751st
Hein Lanz Pt100 sensors are characterized by high accuracy and reproducibility and are extremely reliable.The sensing elements are embedded in the protective tube with magnesium oxide and hermisch closed. Thus, a good heat transfer and vibration protection is obtained.Standard measuring temperatures are -70 ° C. .. +300 ° C;High temperature versions measure upto +500 ° C / +600 ° C. Lowtemperature versions, specialmaterials, process connections andOEM versions are also available.The given measuring temperaturerefers to a medium temperature at theprobe tip.
For cable versions, for example PTS / PTC and PT100 sensors with connection head, possibly with built-in head transmitter, must be made to the respective maximum temperature of the cable, heads, etc. by use of on-
site isolation or Pt100 with neck tube into consideration.The measured speed of the individual Pt100 sensor is highly dependent on the operating conditions, the medium to be measured and the mechanical dimensions.The immersion depth should not be less than 50 mm. Shorter probe lengths, please always clarify with the experienced Hein Lanz employees.
technical data
Measuring element: Platinum resistance element Pt100 / Pt1000, others on request
Temperature ranges: at the tip: -70 ° C. .. +300 ° C+500 ° C / +600 ° C and low temperature version on request
Tolerance: AA, A, B - IEC 60751
Signal:
- 1x Pt100: 2 -, 3 -, 4-wire circuit
- 2x Pt100: in 2x 2x 2-wire or 3-wire circuit
- Pt100 3x: 3x in 2-wire circuit
- Free wire ends for self-installation of a head transmitter
request
Connections:- terminal compartment in aluminum, plastic or stainless steel housing- Fixed connection cable - shielded PTFE, silicone, PVC,
Fiberglass with steel mesh, others on request- Lemo System, M12 system
materials
Materials (process side):- protective tubes made of seamless stainless steel 1.4571 (AISI 316Ti)- Flanges, process connections: 1.4571 (AISI 316 Ti)- Special materials on request
Materials (connection side):- Housing: aluminum, stainless steel, polypropylene PP,
POM polyoxymethylene- Cable Material, see "Connection"
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTK
| |
Sta
nd:
P001
-0-2
01.E
N
sensor type1 1x Pt100, 2-wire2 1x Pt100, 3-wire (preferred type)3 1x Pt100, 4-wire4 2x Pt100, 2-wire (double Pt100 only from ø 5 mm)5 2x Pt100, 3-wire (double Pt100 only from ø 5 mm)
accuracy class (bei 2-fold Pt100 price x 2)B class B, up to +200°C (preferred type)A class A, up to +200°CC class AA (formerly class 1 3 B), up to +200°CY Special version for example High temperature, etc.
designA see dimension drawing A B see dimension drawing B C see dimension drawing C D see dimension drawing D F see dimension drawing F
threadA screw-in thread M6H screw-in thread M10 x 1D screw-in thread M8N screwF screw-in thread M8 x 1O screwG screw-in thread M10P screwT screw-in thread M20Y andere Anschlüsse
material, probe diameter, process sideT 1.4571/ 3 mm (design C + D)U 1.4571/ 5 mm (design B)V 1.4571/ 10 mm (design A)Z 1.4571/ 8 mm (design A)O 1.4571/ probe diameter corresponding thread (design F)
cableA PVCB PTFE (only with 1x Pt100 possible) (preferred type)C siliconeD (only 3-wire)L plug connector LEMO SA 4-pole size 1 up to +80°CY Sonderausführung
cable length 1 1000 mm silicone / PVC A 2 2000 mm silicone / PVC B 5 5000 mm silicone / PVC C S special length 0 without cable with plug version
strain relief0 bruised (limited water resistance) (preferred type)2 tightle rolled, IP 67, only mit PTFE-cableS wasterproof IP 68 versionY special version
length L1 sensor in mm (standard lengths: 50 | 100 | 150 mm)
order code
RTD-PTK mm
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| 1 |
hygienic seal or metal seal
Basics of Hein Lanz Universal RTD form standardized, high-grade platinum measuring resistors with a nominal resistance of 100 ohms at 0 ° C, the tolerance classes AA, A, B - IEC 60751st
Hein Lanz Pt100 sensors are characterized by high accuracy and reproducibility and are extremely reliable.The sensing elements are embedded in the protective tube with magnesium oxide and hermisch closed. Thus, a good heat transfer and vibration protection is obtained.Standard measuring temperatures are -70 ° C. .. +300 ° C;High temperature versions measure upto +500 ° C / +600 ° C. Lowtemperature versions, specialmaterials, process connections andOEM versions are also available.The given measuring temperaturerefers to a medium temperature at theprobe tip.
For cable versions, for example PTS / PTC and PT100 sensors with connection head, possibly with built-in head transmitter, must be made to the respective maximum temperature of the cable, heads, etc. by use of on-
site isolation or Pt100 with neck tube into consideration.The measured speed of the individual Pt100 sensor is highly dependent on the operating conditions, the medium to be measured and the mechanical dimensions.The immersion depth should not be less than 50 mm. Shorter probe lengths, please always clarify with the experienced Hein Lanz employees.
technical data
Measuring element: Platinum resistance element Pt100 / Pt1000, others on request
Temperature ranges: at the tip: -70 ° C. .. +300 ° C+500 ° C / +600 ° C and low temperature version on request
Tolerance: AA, A, B - IEC 60751
Signal:
- 1x Pt100: 2 -, 3 -, 4-wire circuit
- 2x Pt100: in 2x 2x 2-wire or 3-wire circuit
- Pt100 3x: 3x in 2-wire circuit
- Free wire ends for self-installation of a head transmitter
request
Connections:- terminal compartment in aluminum, plastic or stainless steel housing- Fixed connection cable - shielded PTFE, silicone, PVC,
Fiberglass with steel mesh, others on request- Lemo System, M12 system
materials
Materials (process side):- protective tubes made of seamless stainless steel 1.4571 (AISI 316Ti)- Flanges, process connections: 1.4571 (AISI 316 Ti)- Special materials on request
Materials (connection side):- Housing: aluminum, stainless steel, polypropylene PP,
POM polyoxymethylene- Cable Material, see "Connection"
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTL
| |
Sta
nd:
P001
-0-2
01.E
N
sensor type1 1x Pt100, 2-wire2 1x Pt100, 3-wire (preferred type)3 1x Pt100, 4-wire4 2x Pt100, 2-wire (double Pt100 only from ø 8 mm)5 2x Pt100, 3-wire (double Pt100 only from ø 8 mm)
accuracy class (bei 2-fold Pt100 price x 2)B class B, up to +200°CA class A, up to +200°C (preferred type)C class AA (formerly class 1 3 B), up to +200°CY Special version for example High temperature, etc.
process connection for weld-in(weld to be ordered separately, see page 50)
4 G½" G ½ „with O-ring Viton ® seal for socket or SEM 12 SEM 325 G½" with EPDM O-ring seal for socket or SEM 12 SEM 32 (preferred type)X G½" with any other O-ring seal for socket or SEM 12 SEM 326 G½" metal sealing sleeve for SEM or SEM-22-42 (preferred type)Y special version
material, probe diameter, process sideK 1.4571/ 6 mmN 1.4571/8 mm (with exchangeable measuring insert) (preferred type)L 1.4571/ 10 mmP 1.4571/ 6 mm, reduced tip 4 mm; 40 mm longM 1.4571/ 8 mm, reduced tip 5 mm; 40 mm longO 1.4571/ 10 mm, reduced tip 6 mm; 40 mm longR 1.4571/ 8 mm, reduced tip 3 mm; 40 mm longY others
neck tubeA without neck tube (Vorzugstype)B with neck tube (Standard L2 =100 mm) (preferred type)Y with neck tube of choice in mm
connection headA PP-head smallB PP-head big1 plastic head of Delrin ® small2 plastic head of Delrin ® big3 aluminum head small (not with sensor type 5)4 aluminum head big5 stainless steel head big (preferred type)7 PTFE-head small8 PTFE-head bigY other designs
measuring insertF securely mountedW interchangeable (preferred type)
connectionK connection with terminal block (preferred type)M X connection head transmitter UTN-500 software programmableT connection for head transmitter PTN-600 PROFIBUS PA Interface controlD connection with wire ends for self-installation of head transmitterY Special version
length L1 probe in mm (preferred lengths: 50 | 100 | 150 mm)
length L2 neck tube in mm
(preferred length 100 mm)
order code
RTD-PTL mm
Signal converter only with connection head
“big” possible
mm
sleeves SEM-22, SEM-42 metal sealing
sleeves SEM-22, SEM-42metal sealing
sleevesSEM-12SEM-32O-ring seal
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| 1 |
Insertion resistance thermometer Pt100
Basics of Hein Lanz Universal RTD form standardized, high-grade platinum measuring resistors with a nominal resistance of 100 ohms at 0 ° C, the tolerance classes AA, A, B - IEC 60751st
Hein Lanz Pt100 sensors are characterized by high accuracy and reproducibility and are extremely reliable.The sensing elements are embedded in the protective tube with magnesium oxide and hermisch closed. Thus, a good heat transfer and vibration protection is obtained.Standard measuring temperatures are -70 ° C. .. +300 ° C;High temperature versions measure upto +500 ° C / +600 ° C. Lowtemperature versions, special materials,process connections and OEM versionsare also available.The given measuring temperature refersto a medium temperature at the probetip.
For cable versions, for example / PTC and PT100 sensors
with connection head, possibly with built-in head transmitter, must be made to the respective maximum temperature of the cable, heads, etc. by use of on-
site isolation or Pt100 with neck tube into consideration.The measured speed of the individual Pt100 sensor is highly dependent on the operating conditions, the medium to be measured and the mechanical dimensions.The immersion depth should not be less than 50 mm. Shorter probe lengths, please always clarify with the experienced Hein Lanz employees.
technical data
Measuring element: Platinum resistance element Pt100 / Pt1000, others on request
Temperature ranges: at the tip: -70 ° C. .. +300 ° C+500 ° C / +600 ° C and low temperature version on request
Tolerence: AA, A, B - IEC 60751
Signal:
- 1x Pt100: 2 -, 3 -, 4-wire circuit
- 2x Pt100: in 2x 2x 2-wire or 3-wire circuit
- Pt100 3x: 3x in 2-wire circuit
- Free wire ends for self-installation of a head transmitter- Head Transmitter, 4 .. 20mA / 0 .. 10V output, standard, Ex,
Connections:- terminal compartment in aluminum, plastic or stainless steel housing- Fixed connection cable - shielded PTFE, silicone, PVC,
Fiberglass with steel mesh, others on request- Lemo System, M12 system
materials
Materials (process side):- protective tubes made of seamless stainless steel 1.4571 (AISI 316Ti)- Flanges, process connections: 1.4571 (AISI 316 Ti)- Special materials on request
Materials (connection side):- Housing: aluminum, stainless steel, polypropylene PP,
POM polyoxymethylene- Cable Material, see "Connection"
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTS
| |
Sta
nd:
P001
-0-2
01.E
N
sensor type1 1x Pt100, 2-wire2 1x Pt100, 3-wire (preferred type)3 1x Pt100, 4-wire4 2x Pt100, 2-wire (double Pt100 only from ø 5 mm)5 2x Pt100, 3-wire (double Pt100 only from ø 5 mm)6 1x Pt1000, 3-wire7 2x Pt100, 4-wire (double Pt100 only from ø 5 mm)
accuracy class (at 2-fold Pt100 price x 2)B class B, up to +200°C (preferred type)A class A, up to +200°C C class AA (formerly class 1 3 B), up to +200°CY Special version, for example, high temperature, etc.
designA see dimension drawing A 3 x 0,3 mmB see dimension drawing B 4 x 0,3 mmC see dimension drawing C 5 x 0,5 mmD see dimension drawing D 6 x 0,5 mmE see dimension drawing E 8 x 1 mmF see dimension drawing F 10 x 1 mm
material sensorN 1.4571 (preferred type)T 1.4571 with PTFE coatingY Special version
cableA PVC up to +80°CB PTFE up to +200°C (only at 1xPt100 possible) (preferred type)C silicone up to +180°C (not at 2xPt100 3-wire)D (only 3-wire)L plug connector LEMO SA 4-pole size 1 up to +80°CY special versionP plug connector LEMO SA 8-pole size 2
cable length1 1000 mm, silicone / PVC A 2 2000 mm, silicone / PVC B 5 5000 mm, silicone / PVC C Y Special length0 without cable with plug version
strain relief0 bruised (limited water resistance (preferred type)1 (only at Ø 8mm)2 tightly rolled, IP 67, only with PTFE cable3 tightly rolled, IP 68, only with PTFE cable4 tightly rolled, IP 67, with Knickschutzfeder
length L1 sensor in mm (standard lengths: 50 | 100 | 150 mm)
Equipment order information versionLEM04 LEMO SA-connector 4-pole size 1LEM08 LEMO SA-connector 8-pole size 2
order code
RTD-PTS mm
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Temperature measurement
| |
Special
DescriptionThis sensor with integrated cable anchorage is built with a silver-based (Ag) contact surface and adapts to the radius of the respective pipeline. In addition to the positive-locking contact surface, an adjustable spring mechanism ensures optimum measuring results without the need for thermal compound. The technology of this miniaturized 4-wire Pt100sensor with shielded silicone/PTFE cable is the core of our latest development and meets the quality requirements demanded especially for sterile technologies as used in thefood and pharmaceutical industry. Plastic pipeline clamps (POM) for mounting temperature sensors onto the outside of pipes are currently available in sizes from DN8 to DN100.To remove the sensor element, the clamp only needs to be partially opened by loosening a screw. The clamp itself remains on the pipe. This ensures easy validation, where the“ ” on the cable can be dipped directly into the test medium. Stainless steel hose straps are also available for other pipe dimensions. Also available is a miniaturized transducer that can be integrated into the measuring line.“RTD-PTV” mini-clamp-on temperature sensors allow the temperature of the medium in the pipeline to be
Application
measured with only the slightest (unavoidable) temperaturedeviation.To ensure the long-term operational reliability of our pipe sensors, each sensor is subject to a rigorous testingprogramme before being released for sale.
Upon completion of the basic sensor, all pipe sensors undergo a temperature cycle test with measurements at 30-second intervals:15 temperature cycles for:5 min 140 °C (in oil)20 min Cooling phase in ambient air
Once the sensor has been adapted to the respective pipe radius, another
temperature cycles and measurements
test.
Once the endurance test is complete,
sensor‘s measurement accuracy at 0 °C.
pipe
hol
der*
*not
incl
uded
in d
eliv
ery
sens
or
connection cable directly
over-moulded
• No dead space – 100% hygienic• Free of questionable thermal compounds• Quick response• Compact dimensions• Quick mounting• Easy validation• Calibratable• Optional 4–20 mA transducer
Resistance thermometer Pt100 acid-resistant and alkali resistant, Temperature measure-ment for media in pipelines for food, pharmaceutical and chemical industries and biotechnology
tubu
lar
tape
*
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTV
RTD-PTV
Technical data
| |
Sta
nd:
P001
-0-2
01.E
N
Order code
sensor type3 4-wire Pt100
classA class A
sensor materialK aluminium with silver contact surface (Ag)
cableC Silicone/PTFE cable with shielding
sensor connection0T 0.20 m, cable with moulded M8 plug (4-pin)YY special model
protection class3 IP68
diametermm diameter in mm
order code
mm3 A K C 3
technical data
measuring element: Platinum resistance element Pt100
measuring temperature: up to 140°C
tolerance: class A, according IEC 60751
signal type: 1x Pt100 in 4-wire-switch4...20 mA / 20...4 mA with line transmitter LTN-500
installation: contact sensor with special clamp
connection: Silikon/PTFE shielded cable, others on requestmaterials
Ag
sensor housing: Polyamid
clamp: POM; others on request
protection class: IP68
Equipmentequipment LTN -500 transmitter Pt100 on ...20 mA to plug into the sensor cable
A for non-hazardous area
connectionY Input (Pt100) M8-female; Output (4...20 mA) M12-femaleS others
sensoA Pt100 4-wire / 4...20 mA
A standard factory setting Pt100 / 0...100°CB customized adjustments (please indicate measuring range!)
order code
LTN-500 A A S
4 3
1 210...30 V DC(4...20 mA)
0 V(4...20 mA)
connectionpin assignment Pt100 plug M8
red
whi
te
blue
/ r
ed
blue
7 w
hite
Pt100
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTV
RTD-PTV
Temperature measurement
| |
Standard Screw-in Pt100with and without neck tube for hazardous areas
Basis of the Hein Lanz ex-RTD Series RTD-PTX form standardized, high-grade platinum measuring resistors with a nominal resistance of 100 ohms at 0 ° C, the tolerance classes AA, A, B according to IEC 60751stHein Lanz ex-Pt100 probes are characterized by high accuracy, repeatability and reliabilityRTD-PTX-resistance thermometers are approved for gas and dust explosion requirements, and are generally delivered with exchangeable
actual sensor may be removed from the probe tube and possibly replaced without draining the pipe or the
ves costs and avoids
• Long-term stability of platinum temperature sensor Pt100according to IEC 60751
• 2 -, 3 - or 4-wire connection• in 2-gang version in 2-wire connection for redundancy• in accuracy classes AA, A or B• ATEX II 1 G Ex ia IIC T6 T1 Ga or ATEX II 1 D Ex ia IIIC Tx ° C Da• 2-wire technology with current signal 4• 2-wire technology with current signal 4 20 mA, programmable•
• acquisition of process temperatures ranging from - 200 ° C to +600 ° C• Wide choice of process connections process pressures from -1 60 bar• Interchangeable measuring insert• Approved for use in hazardous areas• Integrated temperature head transmitter
process
high
certification
highestprocess-stability &
self-monitoring
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTX
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
| |
neck tubeprocess connection
type E / F
neck tubeprocess connection
type 1
neck tubeprocess connection
type 2
process connectiontype 0 - without
(for sliding sleeve)
process connectiontype 1 -
G ½“ ISO 228-1
process connectiontype 2 - G 1“ ISO 228-1
(B - DIN 2527), DN25
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-PTX
RTD-PTX
| |
:
Order code
RTD-PTX mm mmW
1 ATEX II 1 G Ex ia IIC T6…T1 Ga2 ATEX II 1 G Ex ia IIC T6…T1 Ga / ATEX II 1 D Ex ia IIIC Tx°C Da
nur mit Anschlussart Typ K / Mnur mit Werkstoff Anschlussgehäuse Typ 4 / 5nicht mit Beschichtung
Sensortyp1 1x Pt100 / 2-Draht2 1x Pt100 / 3-Draht3 1x Pt100 / 4-Draht4 2x Pt100 / 2-Draht
Genauigkeitsklasse / ProzesstemperaturB Klasse B - IEC 60751 / -50°C…+400°CA Klasse A - IEC 60751 / -50°C…+400°C nicht bei Sensortyp 4C Klasse AA - IEC 60751 / -50°C…+400°C nicht bei Sensortyp 4Y andere (z B Hochtemperaturausführung -200…+600°C, nicht bei Sensortyp 4 / Beschichtung E-CTFE o a )
Prozessanschluss0 ohne1 G½“ B, ISO 228-12 G1“ B, ISO 228-1E Flansch DIN EN 1092-1, A (B - DIN 2527), DN25, PN10-40F Flansch DIN EN 1092-1, A (B - DIN 2527), DN50, PN10-40Y andere
Werkstoff Prozessanschluss/Fühler (prozessberührend) – Fühlerdurchmesser D1N Stahl 1 4571/316TI – Ø8 mmL Stahl 1 4571/316TI – Ø10 mmW Stahl 1 4571/316TI – Ø12 mmA Stahl 1 4571/316TI - Ø10 mm - reduzierte Spitze Ø8 mm/L=40 mmB Stahl 1 4571/316TI - Ø12 mm - reduzierte Spitze Ø8 mm/L=40 mmY andere
HalsrohrA ohneB Halsrohr L2=100mmY Halsrohr L2/mm nach Wahl
Werkstoff AnschlussgehäuseB PP – Polypropylen2 POM – Polyoxymethylen (Delrin )4 Aluminium Form B gemäß EN 504465 CrNi-StahlG Aluminium Doppelgröße
MesseinsatzW Wechselbarer Messeinsatz
AnschlussartK KlemmsockelM Kopftransmitter ExKTM-_A0 (4…20mA/fest eingestellt) integriertX Kopftransmitter UTN500-B (4…20mA/programmierbar) integriertT Kopftransmitter PTN601-B (PROFIBUS PA /programmierbar) integriertD Freie DrahtendenG 1x Klemmsockel / 1x Kopftransmitter Typ M/X/T/andere Anschlussgehäuse Typ GL 2x Klemmsockel Anschlussgehäuse Typ GY andere
Sensorlänge L1 / mm
Halsrohrlänge L2 / mm
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany | |
Temperature measurement
In brief
Application
Description
Pressure switch for general applicationsMonitoring of absolute or relative pressure in gases, vapors, liquids and dust
In brief
Application
Due to the device construction withprocess temperature from up to –99,9°C to +500°C, process pressuresup to 100 bar and process contactingmaterial stainless steel V4A as well asthe availability of a variety of processconnections the device is especiallysuitable for the use for machinery andplant engineering, air-conditioningand refrigeration plant engineering,hydraulic and pneumatic systemsprocess industry, environmentaltechnology, paint and coating industry.The temperature switch is suitable fordemanding measuring requirements.Due to its high accuracy and the
device can be suited a wide variety ofapplications.Compared with temperature sensors,which are calibrated cyclic, theprocess safety increases when usingthe temperature switch with self-supervision. At cyclic calibration anoccurring drift will be also detected,
produced with a drift affected sensor. Because the device generates a signal immediately at exceedance of the set drift limit, it must not be waited until to the end of the calibration interval. Thus the process safety and with this the product quality will be improved
Besides the increased process safety, the use of the temperature switch with self-supervision allows substantial cost savings. Due to the use of two redundantly working sensors, which are mutually monitored, the calibration intervals can be increased und thus calibrations can be saved.
designed for the measurementof viscous, paste-like, adhesive,crystallizing, particle-laden andcontaminated media. The processconnection is supplied with apositive seal. A reliable, dead-spacefree sealing between the process
connection and the process adapter resp. measuring medium is thus assured.The robust design and the high-quality workmanship turns the device into a very high quality product, which even the most adverse environmental conditions cannot affect, whether the lowest temperatures when used outdoors, extreme shock and vibration or aggressive media.A captive laser marking of the type
throughout the entire lifetime of the device.Obviously is the optional marking of a measurement point designation resp. TAG, a customer label or of a neutral type label, of course also per laser marking.
• General applications in• Machinery and plant engineering• Air-conditioning and refrigeration plant engineering• Hydraulic and pneumatic systems• Process industry• Environmental technology
• Wide range of applications• Wide process temperature range –99,9°C to +500°C• High process pressure tightness up to 100 bar• Wide variety of process connections• High protection class IP65 / IP67• Wide environmental temperature range –40°C to +85°C• Long term stable temperature sensor platinum Pt100 class A – DIN EN60751• Increased process safety and cost saving by self-supervising measuring system• High accuracy – char range• Integrated evaluation electronic: Digital display, function LED’s, keyboard /
2x PNP switch output / 1x current output 4…20mA / Connector plug M12• High operating comfort: enclosure and display rotatable for optimal
operability in each installation position• Robust high brightness LED display for best readability• 3-key operation without additional assistance with tactile feedback
V4A
Description
RTD-TS4S
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany | |
Terminal enclosure
Type 1 – Thread ISO 228-1 – G½”
Type 3 – Thread ISO 228-1 – G¼”
Sensor tube
Type 0 – without thread
gasket
RTD-TS4S
| |
SC STS4S SRTD-
Order code
TypeTS4S Standard
Measuring systemS Resistance sensor Pt100-AD Resistance sensor Pt100-A / semiconductor sensor, self-supervision function
ApprovalS Standard
Process connection0 1 Thread ISO 228-1 – G½”B3 Thread ISO 228-1 – G¼”B4 12/SEM-32)5 2/SEM-32)Y others
Sensor tube material / diameter (process wetted)K CrNi-steel, Ø6mmN CrNi-steel, Ø8mmL CrNi-steel, Ø10mmM CrNi-steel, Ø8mm, Tip Ø5mm / L 40mm – only measuring system type SO CrNi-steel, Ø10mm, Tip Ø6mmR CrNi-steel, Ø8mm, Tip Ø3mm / L 40mm – only measuring system type S Y others
Neck tube0 without1 Neck tube, Standard L2 = 100mmY Neck tube, other length L2
Material terminal enclosureC CrNi-steel
Measuring range2 –99,9 … +200°C – Measuring system type S3 –99,9 … +500°C – Measuring system type S4 –50°C … +175°C – Measuring system type DY Special measuring range
Electronic – outputA 4-wire, 2x Switch PNP B 4-wire, 1x Switch PNP, 1x Signal 4…20mAC 5-wire, 2x Switch PNP, 1x Signal 4…20mAD 4-wire, 1x Switch PNP, 1x Signal 4…20mA, Desina
Electronic – functionS Standard
Electrical connectionS Plug M12x1
Sta
nd:
P001
-0-2
01.E
N
Ordering information Model matching cable socket, VA-nut matching cable socket, VA-nut (at 0...10 V)
connection cable 5 m, 4-pole, shielded connection cable 5 m, 5-pole, shielded
Equipment
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-TS4S
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany | |
Temperature measurement
In brief
Application
Description
Pressure switch for hygienic applicationsMonitoring of absolute or relative pressure in gases, vapors, liquids and dust
In brief
Application
Due to the device construction with process temperature from up to –99,9°C to +500°C, process pressuresup to 50 bar and process contactingmaterial stainless steel V4A as well asthe availability of a variety of processconnections the device is especiallysuitable for the use for food andbeverage industry, pharmaceuticalindustry, biotechnology and sterileprocess engineering.The temperature switch is suitable fordemanding measuring requirements.Due to its high accuracy and the
device can be suited a wide variety ofapplications.Compared with temperature sensors,which are calibrated cyclic, theprocess safety increases when usingthe temperature switch with self-supervision. At cyclic calibration anoccurring drift will be also detected,
produced with a drift affected sensor.Because the device generates a signal
immediately at exceedance of the set drift limit, it must not be waited until to the end of the calibration interval. Thus the process safety and with this the product quality will be improved
Besides the increased process safety, the use of the temperature switch with self-supervision allows substantial cost savings. Due to the use of two redundantly working sensors, which are mutually monitored, the calibration intervals can be increased und thus calibrations can be saved.
The process connection with metallic
for the hygienic, dead-space and elastomer-free process adaption.The robust design and the high-quality workmanship turns the device into a very high quality product, which even the most adverse environmental conditions cannot affect, whether the lowest temperatures when used outdoors, extreme shock and vibration
or aggressive media.A captive laser marking of the type
throughout the entire lifetime of the device.Obviously is the optional marking of a measurement point designation resp. TAG, a customer label or of a neutral type label, of course also per laser marking.A LABS-free resp. silicone-free version, a factory calibration with
also optionally available like a material
suitability.
• Hygienic and aseptic applications in• Food and beverage industry• Pharmaceutical industry• Biotechnology• Sterile process engineering
• Wide range of applications• Wide process temperature range –99,9°C to +500°C• High process pressure tightness up to 50 bar• Wide variety of hygienic and aseptic process connections• High protection class IP65 / IP67• Wide environmental temperature range –40°C to +85°C• Long term stable temperature sensor platinum Pt100 class A – DIN EN60751• Increased process safety and cost saving by self-supervising measuring system• High accuracy – char range• Integrated evaluation electronic: Digital display, function LED’s, keyboard /
2x PNP switch output / 1x current output 4…20mA / Connector plug M12• High operating comfort: enclosure and display rotatable for optimal
operability in each installation position• Robust high brightness LED display for best readability• 3-key operation without additional assistance with tactile feedback
V4A
Description
RTD-TS4L
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany | |
Terminal enclosure
Type 6 – Thread ISO 228-1 – G½”, metallic/elastomer-free sealing
Type O – Dairy coupling DIN 11851 – DN25, PN40Type N – Dairy coupling DIN 11851 – DN40, PN40Type M – Dairy coupling DIN 11851 – DN50, PN25
Type R – Varivent® F tube – DN25…DN32 / 1”…1¼”, PN40Type P – Varivent® N tube – DN40…DN162 / 1½”…6”, PN40
Sensor tube
Type F – Aseptic tube coupling DIN 11864-1-A – DN25, PN40Type G – Aseptic tube coupling DIN 11864-1-A – DN40, PN40
Type T – Tri-Clamp® – 2” / Clamp DIN 32676 – DN50 / Clamp ISO 2852 – DN51, PN16
RTD-TS4L
| |
SC STS4L SRTD-
Order code
TypeTS4L Hygienic applications
Measuring systemS Resistance sensor Pt100-AD Resistance sensor Pt100-A / semiconductor sensor, self-supervision function
ApprovalS Standard
Process connection6 Thread ISO228-1 – G½“, metallic/elastomer-free sealing (socket SEM-22/SEM-42)F Aseptic tube coupling DIN 11864-1-A – DN25, PN40G Aseptik-Rohrverschraubung DIN 11864-1-A – DN40, PN40O Dairy coupling DIN 11851 – DN25, PN40N Dairy coupling DIN 11851 – DN40, PN40M Dairy coupling DIN 11851 – DN50, PN25R Varivent® F tube – DN25...DN32 / 1”…1¼”, PN40P Varivent® N tube – DN40…DN162 / 1½”…6” , PN40T Tri-Clamp® – 2” / Clamp DIN 32676 – DN50 / Clamp ISO 2852 – DN51, PN16Y others
Sensor tube material / diameter (process wetted)K CrNi-steel, Ø6mmN CrNi-steel, Ø8mmL CrNi-steel, Ø10mmM CrNi-steel, Ø8mm, Tip Ø5mm / L 40mm – only measuring system type SO CrNi-steel, Ø10mm, Tip Ø6mmR CrNi-steel, Ø8mm, Tip Ø3mm / L 40mm – only measuring system type S Y others
Neck tube0 without1 Neck tube, Standard L2 = 100mmY Neck tube, other length L2
Material terminal enclosureC CrNi-steel
Measuring range2 –99,9 … +200°C – Measuring system type S3 –99,9 … +500°C – Measuring system type S4 –50°C … +175°C – Measuring system type DY Special measuring range
Electronic – outputA 4-wire, 2x Switch PNP B 4-wire, 1x Switch PNP, 1x Signal 4…20mAC 5-wire, 2x Switch PNP, 1x Signal 4…20mAD 4-wire, 1x Switch PNP, 1x Signal 4…20mA, Desina
Electronic – functionS Standard
Electrical connectionS Plug M12x1
Sta
nd:
P001
-0-2
01.E
N
Hein Lanz GmbH | www.heinlanz.com | info@heinlanz.com | Freiburg | Germany
RTD-TS4L