Post on 11-Feb-2019
transcript
Technology applied to the labyrinth. AZUD PRO, a step forward. La tecnología aplicada al laberinto. AZUD PRO, un paso hacia delante.
The main flow in charge of driving the water along the whole trajectory of the emitter, from the inlet to the outlet of the same.
Un flujo principal, encargado de conducir el agua a lo largo de toda la trayectoria desde la entrada al emisor hasta el exterior del mismo.
The interaction of the main flow with the secondary flows contributes to increase the effective speed of water.
La interacción del flujo principal con los flujos secundarios contribuye a aumentar la velocidad efectiva de circulación del agua.
The existence of numerous secondary flows help to dissipate most of the pressure energy and avoid dynamically sedimentation.
La existencia de numerosos flujos secundarios ayudan a disipar gran parte de la energía de presión y evitan de forma dinámica la sedimentación.
What it isQué es
ApplicationAplicación
AdvantagesVentajas
AZUD PRO is the success of the result of 25 years of experience in the micro irrigation sector.
The use of the lastest technologies and the innovative design criteria to the development of the new emitters have made possible the application in AZUD PRO of the “DS Technology” by AZUD, together with the obtaining of the maximum hydrodynamic efficiency and emitter’s reliability under all the possible working conditions.
AZUD PRO es un éxito de AZUD fruto de sus 25 años de experiencia en el sector de la microirrigación.
El empleo de las últimas tecnologías y de acertados criterios de diseño para el desarrollo de nuevos modelos de emisores ha permitido a AZUD la aplicación en AZUD PRO de DS Technology y así obtener la máxima eficiencia hidrodinámica y fiabilidad del emisor bajo todas las condiciones de trabajo posibles.
Para riego de cultivos intensivos.
Para explotaciones con cultivos arbóreos.
Para riego en invernadero.
For irrigation in intensive crops.
For tree exploitations.
For irrigation in greenhouses.
TECNOLOGIA DS: máxima proteccion ante obturaciones.
Mayor uniformidad.
Máxima resistencia ante la acción degradante de la radiación UV.
Tubería con gotero integrado AZUD PRO. El gotero se encuentra protegido durante toda la vida útil del sistema, aportando alta resistencia mecánica contra golpes y fricciones.
DS TECHNOLOGY: top protection against clogging.
Higher uniformity.
Maximum resistance against any degrading action of UV.
Integral dripline AZUD PRO. The dripper is protected inside the dripline during the useful life of the system, providing high mechanical resistance against strokes and frictions.
91000800
Flow
/ Ca
udal
(l/h
)
Pressure / Presión (bar)
STRAIGHT CONNECTOR ENLACE RECTO
PVC OFFTAKE CONNECTOR WITH GROMMETCONEXIÓN CTR PARA PVC CON JUNTA
TEE - CONNECTOR CONEXIÓN EN T
WE ONLY RECOMMEND ACESSORIES OFFICIALLY AUTHORISED BY AZUD, CHECK OUR RANGE OF AZUDFIT ACCESORIES RECOMENDAMOS ACCESORIOS HOMOLOGADOS POR AZUD, CONSULTE NUESTRA GAMA DE ACCESORIOS Y COMPLEMENTOSSA
FETY
FIT
TING
ACCE
SORI
OS D
E SE
GURI
DAD
www.azud.com
Nominal flowCaudal nominal
AZUD PRO16Model AZUD PRO
Modelo AZUD PRO
Inner DiameterDiámetro interior
Nominal ThicknessEspesor nominal
AZUD PRO20
Maximum pressurePresión máxima
ISO 9261
bar | psi
mm | in
l/h | gph
mm | in
1L 1.6L 2L 2.2L 4L 1L 1.6L 2L 2.2L 4L
1.00 | 0.26 4.00 | 1.062.20 | 0.571.98 | 0.521.60 | 0.42
13.70 | 0.54 17.20 | 0.68
0.9 | 0.035 1.0 | 0.039
3.0 | 44 3.5 | 51
0.9 | 0.035 1.0 | 0.039
3.0 | 44 3.5 | 51
AZUD PROPressurePresión
bar psi
0.5
1.0
1.5
2.0
2.5
7
15
22
29
36
1Ll/h gph
0.69
0.97
1.18
1.36
1.52
0.18
0.26
0.31
0.36
0.40
1.6Ll/h gph
1.10
1.55
1.90
2.20
2.40
0.29
0.41
0.50
0.58
0.63
2Ll/h gph
1.10
1.98
2.42
2.78
3.10
0.29
0.52
0.64
0.73
0.82
2.2Ll/h gph
1.50
2.15
2.60
3.00
3.40
0.40
0.57
0.69
0.79
0.90
4Ll/h gph
2.85
4.00
4.90
5.60
6.30
0.75
1.06
1.29
1.48
1.66
AZUD PRO 1L
AZUD PRO 1.6L
AZUD PRO 2L
AZUD PRO 2.2L
AZUD PRO 4L
AZUD PRO
ModelsModelos
Discharge Equation / Ecuación caracteristica AZUD PRO q = K · hx
q (l/h) - h (mca)
q = 0.31 · h0.49
q = 0.50 · h0.49
q = 0.64 · h0.49
q = 0.71 · h0.49
q = 1.29 · h0.49
q (gph) - h (psi)
q = 0.07 · h0.49
q = 0.110 · h0.49
q = 0.14 · h0.49
q = 0.153 · h0.49
q = 0.285 · h0.49
* Slope / Pendiente: 0%** Inlet pressure / Presión entrada: 1bar / 15 psi
1L
1.6L
2L
2.2L
4L
1L
1.6L
2L
2.2L
4L
AZUD PRO Dripline length / Longitud de ramal (m)*
Spacing between emitters / Separación de emisores (m)** Model Modelo
16
20
0.20 m8 ˝
0.25 m10 ˝
0.33 m13 ˝
0.30 m12 ˝
0.40 m16 ˝
0.50 m20 ˝
0.60 m24 ˝
0.75 m30 ˝
1.00 m39 ˝
1.25 m49 ˝
1.50 m59 ˝
(m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet) (m) (feet)
84
61
50
50
35
122
89
73
72
50
276
200
164
164
115
400
292
239
236
164
98
72
59
59
37
143
104
86
85
59
322
236
194
194
121
469
341
282
279
194
110
80
67
66
39
155
120
98
95
65
361
262
220
217
128
509
394
321
312
213
119
87
71
71
43
174
127
104
104
71
390
285
233
233
141
571
417
341
341
233
130
100
81
75
49
190
140
119
120
80
427
328
266
246
161
623
459
390
394
262
160
115
94
84
58
220
165
139
140
95
525
377
308
276
190
722
541
456
459
312
175
130
107
96
69
260
185
158
155
105
574
427
351
315
226
853
607
518
509
344
195
150
123
120
79
300
213
182
175
125
640
492
403
394
259
984
699
597
574
410
245
180
149
145
98
350
257
220
220
150
804
591
489
476
322
1148
843
722
722
492
260
200
171
160
110
390
295
255
240
160
853
656
561
525
361
1280
968
836
787
525
290
225
193
183
125
435
330
286
270
180
951
738
633
600
410
1427
1083
938
886
591
SIST
EMA
AZUD
, S.A
. res
erve
s th
e rig
ht to
cha
nge
the
char
acte
ristic
s of
thes
e pr
oduc
ts w
ithou
t prio
r not
ice
/ SIS
TEM
A AZ
UD, S
.A. s
e re
serv
a el
der
echo
de
efec
tuar
mod
ifica
cion
es e
n la
s ca
ract
erís
ticas
de
sus
prod
ucto
s
4.00 | 1.062.15 | 0.571.98 | 0.521.55 | 0.410.97 | 0.26
AZUD PRO 4L
AZUD PRO 1L
AZUD PRO 2.2LAZUD PRO 2L
AZUD PRO 1.6L
SISTEMA AZUD, S.A.Avda. de las Américas P. 6/6 - Pol. Ind. Oeste30820 ALCANTARILLA - MURCIA - SPAIN
Apdo. 147•30169 SAN GINÉS - MURCIA - SPAINTel.: +34 968 808402 • Fax: +34 968 808302E-mail: azud@azud.com • www.azud.com