FEATURES

PRODUCT DESCRIPTION

APPLICATIONS

Electronic Speci�cations

Permanent Installations :Theatres, Concert Halls, Clubs, Houses of Worship,Conference Rooms, Indoor Sports Arenas & StadiumsSound Reinforcement : Touring, Bands, D.J. SystemsOrchestras, anywhere additional LF response is needed

FBT Elettronica S.p.A. - Zona Ind.le Squartabue - 62019 RECANATI - ITALY Tel. 071 750591 - Fax 071 7505920 - e.mail: info@fbt.it - www.fbt.itFBT USA- Palm Coast, FL. 800-333-9383 email: fbtusa@sbcglobal.net

15mm / 5/8" Baltic birch plywood enclosure1200w RMS Class D ampli�er380mm/15" high excursion wooferFrequency response 38Hz - 120HzControl panel with XLR in & link, Volume, EQ presets,Delay, phase switch 0°-180°, GND lift switchSPL capability 136dBDigital Signal Processor with 8 presetsM20 top mount speaker stand socketTwo aluminum carrying handlesCompletely Manufactured in Italy

The FBT ProMaxX 15SA, 15" compact band-pass subwoofer is the perfect low-frequency extension for the ProMaxX Series Speakers.The FBT ProMaxX 15SA shall meet the following performance criteria: Frequency response of 38Hz -120Hz, Maximum SPL of 136dBpeak, Class D 1200W RMS power ampli�er with high e�ciency switch mode power supply enclosed inside a thermally e�cientlightweight aluminum die-cast chassis.. The FBT ProMaxX 15SA provides a DSP with 8 presets: 2 equalization with 4 adj. LF crossoverfrequencies. The FBT ProMaxX 15SA features 5/8" Baltic birch plywood construction covered in a scratch resistant black paint withM20 top-mounted stand adapter and two aluminum carrying handles. The control panel provides XLR in & link out, Volume control,EQ presets, Delay, Phase R e v e r s a l Switch : 0°-180°, Ground lift switch.

band-pass

38Hz - 120Hz

omnidirectional

adj. preset dependant

cont: 800w RMS

132dB / 136dB

507 x 585 x 605mm

CONT: 500mS, RMS power on nominal speaker impedanceMAX: 2mS burst, RMS power on nominal speaker impedanceMAX PEAK: based on max peak output voltage and nominal speaker impedance

1 x 15" - 3" coil

20" x 23" x 23.82"

615 x 670 x 715mm24.2" x 26.4" x 28.2"

65 lbs / 29.5 kg

73.8 lbs x 33.5 kg

birch plywood

Built-in Ampli�er

max: 1200w RMS

peak: 2400w RMS

22k OhmsInput Impedance

Maximum SPL (continuous/peak)

AC Power Requirement 6.4 A

XLR with loop

CONT. SPL: half space, based on continuos power amp rating and LF transducer average sensitivity data, 125mS time averagePEAK SPL: half space, based on max peak power amp rating and system peak sensitivity, 10mS time average

Processed Active Subwoofer