Post on 17-Apr-2020
transcript
APPLICATIONS FOR WATER AND SEWAGE
WA
TER
IND
UST
RY
O U R P R O F E S S I O N I S Y O U R L E V E L
FIELD INSTRUMENTS IN MEASUREMENT SYSTEMSLevel and analytical transmitters can be connected to the MultiCONT process controller, or with the help of suitable interfaces or modems, NIVELCO field instruments can provide measurement results and control signals directly to the process control system. NIVISION software provides a perfect choice for process visualization, data collection, measurement-database management and process control tasks.
F R O M P O T A B L E W A T E R … T O S E W A G E ! The instrumentation requirements of the water/waste-water industries can be fully covered by the wide selection available with NIVELCO’s range of instruments. Originally a portfolio of level and pressure instruments were offered for this industry segment. Recently water analytical instruments have been added to widen the range of instruments to offer complete instrumentation packages that encompass all the technologies of water production and purification. Most of the instruments are available in ATEX Ex-approved types conforming to the latest requirements. Small and medium sized systems are easy to set up using NIVELCO’s MultiCONT process controllers that can read the measured values and program NIVELCO transmitters remotely. Alternatively, our NIVISION software can be used to integrate NIVELCO transmitters into a process visualization system.
PiloTREK – pulse burst radarMicroTREK – guided wave radarEasyTREK, EchoTREK – ultrasonicNIVOCAP – capacitiveNIVOPRESS N – submersibleUNICONT PSW – ultrasonic pump control
P O I N T L E V E L D E T E C T I O N
L I Q U I D A N A L Y T I C S
NIVOFLOAT – float switchNIVOCONT – conductive switchNIVOPOINT – magnetic trackingNIVOMAG – magnetic couplingNIVOSWITCH – vibrating forkNIVOCAP CK – RF-capacitance
AnaCONT LEP/LER – pH, ORPAnaCONT LED – dissolved oxigenAnaCONT LCK – conductivity transmitter
HART
USB
USB
RS485
MultiCONTHART
EasyTREK
EchoTREK
AnaCONT LEP NIVOPRESS N
Interface
RS485
ISOMAG
HART
RS485
PiloTREK EasyTREK AnaCONT LED EchoTREK EasyTREK AnaCONT LCK
RS485
NIPRESS
4-20
mA
4-20
mA
EchoTREK NIVOSWITCH NIVOFLOAT NIVOPOINTAnaCONT LED NIVOCONT K
RS485
UNICOMMSAK-305
UNICOMMSAT-304
SAK-305
NIVOPRESS D – hydrostaticNIPRESS – piezoresistive
P R E S S U R E M E A S U R E M E N TF L O W M E A S U R E M E N T
Parshall – open channel ultrasonicISOMAG – magnetic induction
C O N T I N U O U S L E V E L M E A S U R E M E N T
lewat
17a0
606b
NIVOPRESS D – hydrostatic/bottom pressure ■ Hydrostatic level measurement ■ Pressure measurement ■ For foaming, corrosive liquids ■ Remote programming
AnaCONT – pH/ORP transmitters ■ Compact analytical transmitter ■ Checking of water quality ■ Waste water treatment ■ Application oriented probes ■ Wide range of accessories
UNICONT PSW – pump control system ■ Fully automatic pump control ■ For small sewage shafts, sumps ■ Ultrasonic level measurement ■ Maintenance-free ■ Built-in timer, circuit breaker
NIVOCAP CK – RF-capacitance ■ Intelligent electronic level switch ■ Easy calibration, selectable sensitivity ■ Level switching in tanks or basins ■ Foam detection ■ For adhering sticky materials
Open-channel flow measurement ■ Ultrasonic level transmitter ■ For calibrated, standard Parshall flumes ■ Suitable for all flume types ■ Suitable for water or sewage ■ Certification of measurement ■ Treated effluent sewage measurement ■ Yield measurement of irrigation canals
Nive
lco re
serv
es th
e rig
ht t
o ch
ange
tech
nical
data
with
out n
otice
!ISOMAG – flowmeter
■ Electromagnetic principle ■ For water and sewage measurement in pipelines ■ Compact or separated type ■ Can be certified ■ For custody transfer measurements
N I V E L C O P R O C E S S C O N T R O L C O .H - 1 0 4 3 B U D A P E S T , D U G O N I C S U . 1 1.T E L . : ( 36 -1 ) 889 -0100 ▪ F A X : (36 -1 ) 889 -0200E-mail: marketing@nivelco.com ▪ www.nivelco.com
O U R P R O F E S S I O N I S Y O U R L E V E LP
OTA
BLE
WA
TER
PR
OD
UC
TIO
NSE
WA
GE
TR
EA
TME
NT
WELLS
FILTERS
SETTLING
STORAGE TANK
WATER TOWER
BOOSTER PUMP
BLADDER PRESSURE TANKS
AUXILIARY MATERIALS
NIVO
PRES
S N
NIVOPRESS N
NIVOPRESS N
NIPRESS
NIPR
ESS
NIPR
ESS
NIPR
ESS
ISOMAG
ISOMAG
NIVO
PRES
S N
ISOMAG
ISOMAG
ISOMAG NI
VOPR
ESS
D
EchoTREKPiloTREK
NIVOMAG
NIVOSWITCH
NIVOCAP CK
EchoTREK
NIVOCAPNIPRESS NIPRESS NIPRESSNIVOCAP NIVOCAP
AnaCONT LEPTHERMOCONT TT EasyTREK
NIPRESS
ISOMAG
NIPRESS
ISOMAG
FIELD SEWAGE PUMP AUXILIARY MATERIAL TANKS
CENTRAL COLLECTING SUMP
SCREEN
FINAL SEDIMENTATION TANK
CLARIFICATION TANK
DIGESTER
BIOGAS STORAGE
BIOGAS GENERATOR
PARSHALL OR OPEN CHANNEL FLUME
AERATION TANK
EasyTREK
EchoTREK
EchoTREK
EchoTREK
THERMOCONT TT
NIVO
PRES
S D
MicroTREK
EchoTREK EchoTREK EchoTREKPiloTREK
NIVOSWITCH
NIVOSWITCH
MultiCONT
AnaCONT LCK
AnaCONT LEP
AnaCONT LCK
AnaCONT LEP
EchoTREKEasyTREK
NIVOFLOAT
NIVOPRESS N
NIVOCAP CK
INSTRUMENT SELECTION
EchoTREK – ultrasonic ■ Continuous level measurement in basins, wells, sumps ■ Tank fill/empty control ■ Flow measurement ■ Remote programming ■ Volume calculation
NIVOCONT – conductive ■ Electronic level switch for conductive liquids ■ Compact and separated types ■ Filling/emptying control ■ Indication of water rush-in
NIVOFLOAT – float switch ■ For water and sewage ■ Level switching of tanks, basins and sumps ■ Filling / emptying control ■ Level switching of sewage pumps ■ Fail safe indication
PiloTREK – pulse burst radar ■ High precision level measurement of liquids,
slurries, emulsions ■ Level measurement in high temperature and
high pressure applications
NIVOPRESS N – submersible ■ Draw-down protection of wells ■ Level measurement in tanks, basins ■ Control of sewage pumps ■ Remote programming
EasyTREK – ultrasonic ■ IP68 protection ■ Continuous level measurement in basins, wells, sumps ■ Level controlling of sewage pumps ■ Tank fill/empty control ■ Flow measurement ■ Remote programming ■ Volume calculation
WATER PRODUCTION PROCESS
WATER DISTRIBUTION SYSTEMIn the water production process pump controlling in small sumps can be solved by NIVOCONT K conductive switches and NIVOFLOAT float switches are ideal as back-up devices to increase the safety. To distribute the water to the customers is done by booster pumps, water towers or bladder pressure tanks. Level in the water tower can be measured with EasyTREK ultrasonic level transmitters from either the top or the bottom with NIVOPRESS D hydrostatic level transmitters.
WATER PRODUCTION WELLSThe water production wells are drilled into the ground layers rich in water where pumps are lowered to pump the raw water to the central water treatment facilities. Popular choice is the NIVOPRESS N submersible transmitter because it is suitable for measuring both water level and temperature in deep underground wells. The pressure of the water pumped from the wells is to be measured on the surface pipeline by NIVOPRESS NZ/ND or NIPRESS transmitters.
WATER TREATMENTYield of the input e.g. spa water is measured with ISOMAG electromagnetic flowmeters and temperature with THERMOCONT TT instruments. The organic and inorganic materials are removed either by mechanical filters or by adding coagulant materials to the water and the contaminations are separated in settling tanks. Continuous level measurement is recommended with EchoTREK / PiloTREK, measuring pH value of the clear water is with AnaCONT water analytical units.
WASTEWATER TREATMENT PROCESS
SEWAGE LIFT STATIONSThe sewage is collected in underground sumps or pits, also known as wetwells or lift stations, and is pumped to the sewage treatment plant. The EasyTREK SP type non-contact ultrasonic level transmitter models with IP68 ingress protection are our number one recommendation for these measurement tasks, likewise the another popular choice for deep sumps, the NIVOPRESS N submersible level transmitters equipped with sewage adaptor. For fail-safe protection the robust NIVOFLOAT NW float level switches are suitable solutions. The input sewage from the network contains a lot of organic and non-organic materials in suspended form as well as in solution. This pollution has to be removed.
WATER / SLURRY TREATMENTThe purified wastewater can be streamed to any natural water after chemical inspection and yield measurement. Level controlling tasks of rotary drum screens are performed with ultrasonic level transmitters and detection of the generated foam on the top of the pools can be done with NIVOCAP CK capacitance level switches. The AnaCONT range of analytical measurement devices are ideal for the pH and DO analysis of the cleaned water. Open channel flow metering can be done using our Parshall flume and EasyTREK level transmitter. For calculation and data logging a MultiCONT controller can be used. The slurry separated in the sedimentation tank is transferred to the digester tank. The generated biogas is flammable medium this way only Ex type ultrasonic or MicroTREK guided wave radars can be used for level measurement tasks.