DESN 103

ARCHITECTURAL DIMENSION STYLE FOR A 1-1/2”=1’-0” SCALE DRAWING (called “arch1.5”)

• In the FIT tab under Scale for Dimension Features in the Overall Scale box is where you enter in the appropriate scale factor for whatever size drawing you are drafting. This means you could easily create an architectural dimension style for a ¼”=1’-0” scale drawing by creating a New dimension style from this “arch1.5” style by changing this one number.

* Here in the “Use overall scale of: ____ “ is where you enter in the appropriate scale factor for whatever size drawing you are drafting.

ARCHITECTURAL MLEADER STYLE FOR A 1-1/2”=1’-0” SCALE DRAWING (called “arch1.5”)

• In the Leader Structure tab under Scale in the Specify Scale box is where you enter in the appropriate scale factor for whatever size drawing you are drafting. This means you could easily create an architectural Multileader style for a ¼”=1’-0” scale drawing by creating a New multileader style from this “arch1.5” style by changing this one number.

* Here in the “Specify scale: ____ “ is where you enter in the appropriate scale factor for whatever size drawing you are drafting.