Post on 18-May-2018
transcript
2017.10 / i AT
EX
LS rangeMarkings
+ NB no.
EC type-examinationcertificate number
Min.IP
Specificmanual
LSEC declarationof conformity
Supplied with each motorGeneral manual
Alice no./Doc no.G/D
IMP297NO167(1889 + 3522)Alice 4102601
IMP297NO190(1889 + 3606)Alice 4143462IMP297NO191(1889 + 3607)Alice 4143466
IMP297NO179(1889 + 3385)Alice 4022748
00800080008000800080008000800080008000800080008000800080008000800080
0080008000800080
FLSD
(2) if “e” TBthen
“d” becomes “d e”
(F)LSE
(F)LSN
(1) Varmeca 30
(F)LSPXZone 21
(F)LS Zone 22
Electric Mo
tors
Mem
oexp
losive atm
osp
heres
Gas
Gas
Gas --
GasDust
GasDust
Gas&
Dust
Dust
Dust
I: Methane - IIA: Propane - IIB: Ethylene - IIC: Hydrogen, Acetylene - IIIA: combustible particles in suspension - IIIB: non-conductive dust - IIIC: conductive dust
3700 en -
80 ≥ frame size ≥ 132:INERIS 10 ATEX 0025 X
IECEx INE 10.0012 X
160 frame ≤ size ≤ 280:INERIS 11 ATEX 0048 X
IECEx INE 16.0008 XHA 315 et 355
INERIS 01 ATEX 0001 X
INERIS 01 ATEX 0010 X
INERIS 01 ATEX 3004 X
Leroy-Somer self certification
LSPX:INERIS 00 ATEX 0003 X
FLSPX(2):INERIS 00 ATEX 0004 X
(F)LSPX FCR(2):INERIS 03 ATEX 0012 X
(fr) Alice 2851790/3781(en) Alice 2870637/3781
(fr) Alice 4136784/3614(en) Alice 4142269 (3614)
(fr) Alice 3712762 (2727)(en) Alice 3712761 (2727)
(F)LSPX (fr) 3917454 (3255)(en) 3984965 (3255)
VARMECA 30 (fr/en)4297067 (3776)
201G1D
0
GcII A
BC
III ABC
DcDb
Da
GbGa
12
2122
No motor
Leroy-SomerRanges
Dust
Gas
ATEX marking
Marking Zones
II
The choise of equipment (and its type of protection) is the responsabilityof the manager of the site where it will be installed
ATEX motor designations and documentation in accordance with IEC 60079-0
EPL
EPL
FLSDFlameproof motor
(F)LSEIncreased safety
(F)LSNNon-sparking motor
(F)LS zone 22Max. surface temperature 125°C
(F)LSPXMax. surface temperature 125°C
Types of protection
Ex d
Ex e
Ex n
Ex tb
Ex tc
D
G
MarkingATEX
Protection typeGas
Protection typeDust
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex d(2)
Ex eEx eEx eEx eEx nAEx nA
MbGbGbGbGbGbGbGbGbGbGbGbGbGbGbGbGbGcGc
55555555555555656565656565555565655565
65656565
55
III B T4II B T5II B T6II C T4II C T5II C T6II B T4II B T5II B T6II C T4II C T5II C T6II C T3II C T4II C T3II C T4II C T3II C T3
I M2II 2 GII 2 GII 2 GII 2 GII 2 GII 2 GII 2 GDII 2 GDII 2 GDII 2 GDII 2 GDII 2 GDII 2 GII 2 GII 2 GDII 2 GDII 3 GII 3 GD
II 2 D
II 3 D
Ex tb III C T125°C DbEx tb III C T100°C DbEx tb III C T85°C DbEx tb III C T125°C DbEx tb III C T100°C DbEx tb III C T85°C Db
Ex tb III C T125°C DbEx tb III C T125°C Db
Ex tc III C T125°C DcEx tb III C T125°C DbEx tb III C T135°C DbEx tb III C T145°C DbEx tb III C T100°C Db to T125°CEx tc III B T125°C Dc
2G3G2D3D
{{
Motor designation and documentation
Danger zones and marking
S4T004(Q1T134)
S4T005(Q1T135)
S4T006(Q1T136)
S4T002(Q1T129)
S4T003(Q1T130)
T1450 C
II 2 D Ex tb IIIC DbT125°CII IIB T4 Gb2 G Ex d
Classification of equipment according to application zones
Surfaceindustries
ATEX groupUsage Category Level of
protectionIf ATEX present
PoweredupII
Very high
High
Normal
Very high
High
Normal
1G2G3G1D2D3D
Firedampmines
High
Very high Poweredup
Powereddown
IM1
M2
Directive 2014/34/EUClassification of equipment Zones
012202122
IP6X
IP6X
IP5X
Maximum mine gas content
Below a certain value
Explosivegas
atmospheres
Explosivedust
atmospheres
EquipmentgroupUsage EPL Level of
protectionIf ATEX present
Poweredup
IIVery high
High
Reinforced
Very high
High
Reinforced
GaGbGcDaDbDc
Firedampmines
High
ABC
IIIABC
Very high Poweredup
Powereddown
IMa
Mb
IEC60079-0Classification of equipment
Equipment Protection Level (EPL)
Maximum minegas content
Below acertain value
Motor type
FLSD (F)LSE (F)LSN (F)LSPX (F)LSzone 22
Equipment group
Equipment category
Protection type
Equipment group
Temperature class
Equipment Protection Level
ATEX marking
Gas and/or dust(Gas, GasDust, Dust)
Protection against risk of explosion
ATEX marking Protection type marking
Marking according to 2014/34/EU directive
Example for FLSD motorMotortype
IP 65 for Ex tb
INERISNotified
Body no.T°C range if
other than (-20 +40)
Cable Temp. marking = 100°C- if ambient temp. > 50°C or if- T ≥ 70°C at the cable gland or if- T ≥ 80°C at the point of conductor connection
PTC.. °CVIK
if VIK certification
No marking: 0080for category 3 motors (Ex n; Ex tc)
EC type-examination certificatenumber issued by a notified body
Flameproofenclosure
Increasedsafety
Nonsparking
Combustibledust
60079-0
Types ofprotection
60079-1 60079-7 60079-15 60079-31
Types of protection
dGas G & Dust
e nAGas G & Dust Gas G & Dust DustDust
tctb
<125°C <125°CT3T4 <125°CT3 <125°C
Non-conductiveT4T5T6
T3T4
*
(isol.) (isol.)(isol.) T3 (isol.)
No spark: inside casing
No spark: outside casing
(F)LSPX (F)LSZone 22
(locked rotor 7 to 10 s) IP6X IP5Xsee 60079-7 annex A;
Spark
Hotspots
Motor outside:casing surface T.
Motor inside:T. at all points
LEROY-SOMERranges
T1450°C
T2300°C
T3200°C
T4135°C
T5100°C
T685°C
T 125°C125°C
OXYGENIN AIR
GASor
COMBUSTIBLEDUST
HOT SPOTor
SPARK
EXPLOSION
Temperature classesMaximum surface temperature
DustTemperature classMaximum external surface temperature (motor)
Gas
I: Methane IIA: PropaneIIB: EthyleneIIC: Hydrogen, Acetylene
IIIA: combustible particles in suspensionIIIB: non-conductive dust (electric resistivity >103Ω.m)IIIC: conductive dust
can be installed in zone 1 and 2
II
2; 3
G, GD
Ex
d, deII
A, B, CT4, T5
T6Gb
II
2; 3
G, GD
Ex
eII
A, B, CT3, T4
Gb
II
3
G, GD
Ex
nAII
A, B, CT3
Gc
II
2; 3
D
Ex
tbIII
A, B, CT125°C
Db
II
3
D
Ex
tcIII
A, BT125°C
Dc
(1)
(1)
can be installed in zone 21 and 22(2)
(2)
(1)
(2)
FLSD (F)LSE (F)LSN
IEC 60079-10