Post on 31-Jan-2018
transcript
Spare parts listRock drills
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
RH 658 L, 658 LS, 658 L-01
ContentsGeneral information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spare parts list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6RH 658 L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6RH 658 LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10RH 658 L-01 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Oversize parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Rock drill AIR-OIL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
ContentsRH 658 L, 658 LS, 658 L-01
General information
This spare parts list applies to the following:
DescriptionPart numberRock drill RH 658 L8311 0302 86Rock drill RH 658 LS8311 0302 87Rock drill RH 658 L-018311 0302 89
Use only authorized parts. Any damage or malfunction caused by the use ofunauthorized parts is not covered by Warranty or Product Liability.Any unauthorized use or copying of the contents or any part thereof isprohibited. This applies in particular to trademarks, model denominations, partnumbers, and drawings.
Instructions for useThis spare parts list contains no safety regulations and is merely intended toassist in the ordering of spare parts.For information about operating, servicing, or repairing, the relevant Safetyand operating instructions must be consulted at all costs.Please observe the safety instructions listed in the relevant Safety and operatinginstructions!
5© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
Spare parts list
RH 658 L
1
2
34
5
6
7
89
9
10
10
11
11
12
13
14
14
15
15
16
17
18
19
2021
222324
24
25
25
26
26
27282929
30
30
31
32
33
3435
36
37
38
3940
4142
43
44
4546
47
48
49
50
51
5253
54
55
56
57
6
44
4546
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-096
RH 658 L, 658 LS, 658 L-01Spare parts list
Part numberQuantityRemarkDescriptionNo.3121 0851 001Hexagon 22 mm
Hexagon 7⁄8 in.Drill steel retainer1
3121 0852 001Retainer pin20108 3392 002Tension pin33121 0030 001Rubber buffer43121 0029 001Buffer plate53121 0292 002Dome nut63121 0342 001Front head73121 0769 801Rotation chuck, complete8(9-11)-1Rotation chuck93121 0023 001Hexagon 22 x 108 mm
Hexagon 7⁄8 x 4 1⁄4 in.Rotation chuck bushing10
3115 1221 001Chuck nut113121 0339 001Intermediate part123100 8478 801Piston, complete13(14-15)-1Piston143100 9299 051Rifle nut153121 0337 001Cylinder163115 1778 001Outlet valve173115 1779 001Lever for extra blowing183106 8683 001Guide disc193106 8682 001Ratchet box200108 1336 001Ø 6 x 60 mm
Ø 0.24 x 2.36 in.Tension pin21
3101 3154 001Rifle bar223115 9200 901Pawl, complete23(24-26)3100 9140 024Pressure spring243100 9641 014Plunger253101 3159 004Pawl263100 9665 001Guide pin273106 8680 801Cover, complete28(29-30)-1Cover293100 9894 011Bushing303106 8681 001Main valve313115 0569 001Back head323121 0349 001Throttle valve333115 1045 001Washer349000 0345 001Adapter353115 1170 001Ø 19 mm
Ø 3⁄4 in.Hose nipple36
9000 0333 001Cap nut373121 0329 001Pin383121 5000 511Coil spring393121 0332 001Lock washer400663 2128 001O-ring413115 0573 001Throttle lever423006 8734 001Nut433101 1372 002Handle grip443000 0119 012Washer453121 0292 002Dome nut463121 0343 002Side bolt473115 0574 002Washer483121 0352 001Air flushing tube493121 0336 001Packing50
7© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
Part numberQuantityRemarkDescriptionNo.3000 9341 021Sealing washer513100 9623 011Adapter523101 4146 001Sealing washer533100 9643 011Protective nut543121 0360 001Handle bolt55-1Data plate563310 1602 001Safety label57
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-098
RH 658 L, 658 LS, 658 L-01Spare parts list
9© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
RH 658 LS
1
2
34
5
6
7
8
9
9
10
10
11
11
12
13
14
14
15
15
16
17
1819
202122
22
23
23
24
24
25262727
28
28
29
30
31
3233
34
35
36
3738
3940
41
42
4344
45
46
47
48
49
5051
52
53
54
555656 57
57
58
58
59
59
60
6061 61
62
62
63 64
656667
68
69
70
71
6
56
42
4344
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-0910
RH 658 L, 658 LS, 658 L-01Spare parts list
Part numberQuantityRemarkDescriptionNo.3121 0851 001Hexagon 22 mm
Hexagon 7⁄8 in.Drill steel retainer1
3121 0852 001Retainer pin20108 3392 002Tension pin33121 0030 001Rubber buffer43121 0029 001Buffer plate53121 0292 002Dome nut63121 0342 001Front head73121 0769 801Rotation chuck, complete8(9-11)-1Rotation chuck93121 0023 001Hexagon 22 x 108 mm
Hexagon 7⁄8 x 41⁄4 in.Rotation chuck bushing10
3115 1221 001Chuck nut113121 0339 001Intermediate part123100 8478 801Piston, complete13(14-15)-1Piston143100 9299 051Rifle nut153121 0337 001Cylinder163106 8683 001Guide disc173106 8682 001Ratchet box180108 1336 001Ø 6 x 60 mm
Ø 0.24 x 2.36 in.Tension pin19
3101 3154 001Rifle bar203115 9200 901Pawl, complete21(22-24)3100 9140 024Pressure spring223100 9641 014Plunger233101 3159 004Pawl243100 9665 001Guide pin253106 8680 801Cover, complete26(27-28)-1Cover273100 9894 011Bushing283106 8681 001Main valve293115 0569 001Back head303121 0349 001Throttle valve313115 1045 001Washer329000 0345 001Adapter333115 1170 001Ø 19 mm
Ø 3⁄4 in.Hose nipple34
9000 0333 001Cap nut353121 0329 001Pin363121 5000 511Coil spring373121 0332 001Lock washer380663 2128 001O-ring393115 0573 001Throttle lever403006 8734 001Nut413101 1372 002Handle grip423000 0119 012Washer433121 0292 002Dome nut443121 0343 002Side bolt453115 0574 002Washer463121 0352 001Air flushing tube473121 0336 001Packing483000 9341 021Sealing washer493100 9623 011Adapter50
11© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
Part numberQuantityRemarkDescriptionNo.3101 4146 001Sealing washer513100 9643 011Protective nut523121 0360 001Handle bolt530663 2122 002O-ring543115 2486 801Silencer, complete55(56-62)0347 6119 002Clamp560663 2100 361O-ring573115 2486 001Silencer, upper part580347 6122 001Clamp590663 2100 371O-ring603115 1428 001Silencer, lower part610663 2100 351O-ring620108 3330 001Tension pin633115 0576 001Outlet valve643121 0338 001Spring650663 2125 001O-ring663115 0577 001Lever for extra blowing673115 0127 001Screw68-1Noise level label69-1Data plate703310 1602 001Safety label71
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-0912
RH 658 L, 658 LS, 658 L-01Spare parts list
13© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
RH 658 L-01
1
2
34
5
6
7
89
9
10
10
11
11
12
13
14
14
15
15
16
17
18
19
2021
222324
24
25
25
26
26
27282929
30
30
31
32
33
3435
36
37
38
3940
4142
43
44
4546
47
48
49
50
51
5253
54
55
56
57
6
44
4546
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-0914
RH 658 L, 658 LS, 658 L-01Spare parts list
Part numberQuantityRemarkDescriptionNo.3121 0888 001Hexagon 25 mm
Hexagon 1 in.Drill steel retainer1
3121 0852 001Retainer pin20108 3392 002Tension pin33121 0030 001Rubber buffer43121 0029 001Buffer plate53121 0292 002Dome nut63121 0342 001Front head73121 0769 831Rotation chuck, complete8(9-11)-1Rotation chuck93115 1748 001Hexagon 25 x 108 mm
Hexagon 1 x 41⁄4 in.Rotation chuck bushing10
3115 1221 001Chuck nut113121 0339 001Intermediate part123100 8478 801Piston, complete13(14-15)-1Piston143100 9299 051Rifle nut153121 0337 001Cylinder163115 1778 001Outlet valve173115 1779 001Lever for extra blowing183106 8683 001Guide disc193106 8682 001Ratchet box200108 1336 001Ø 6 x 60 mm
Ø 0.24 x 2.36 in.Tension pin21
3101 3154 001Rifle bar223115 9200 901Pawl, complete23(24-26)3100 9140 024Pressure spring243100 9641 014Plunger253101 3159 004Pawl263100 9665 001Guide pin273106 8680 801Cover, complete28(29-30)-1Cover293100 9894 011Bushing303106 8681 001Main valve313115 0569 001Back head323121 0349 001Throttle valve333115 1045 001Washer349000 0345 001Adapter353115 1170 001Ø 19 mm
Ø 3⁄4 in.Hose nipple36
9000 0333 001Cap nut373121 0329 001Pin383121 5000 511Coil spring393121 0332 001Lock washer400663 2128 001O-ring413115 0573 001Throttle lever423006 8734 001Nut433101 1372 002Handle grip443000 0119 012Washer453121 0292 002Dome nut463121 0343 002Side bolt473115 0574 002Washer483121 0352 001Air flushing tube493121 0336 001Packing50
15© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
Part numberQuantityRemarkDescriptionNo.3000 9341 021Sealing washer513100 9623 011Adapter523101 4146 001Sealing washer533100 9643 011Protective nut543121 0360 001Handle bolt55-1Data plate563310 1602 001Safety label57
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-0916
RH 658 L, 658 LS, 658 L-01Spare parts list
Accessories
Accessories
Part numberQuantityRemarkDescription9238 2707 901Hexagon 22 mm
Hexagon 7⁄8 in.Optional for RH 658 L and RH 658 LS.
Gauge
Lubricator8202 5102 051For mineral oil.BLG 30, European type8202 5102 391For both mineral and synthetic oil.CLG 30, European type
Water separator8092 0110 821Airflow <120 l/s
<254 cfmVAM 5A, European type
Air line accessories9030 2047 00120 mm
3⁄4 in.Rubber hose, pre-mounted
9030 2115 00120 mm3⁄4 in.
X-LITE flat hose, universal
Oversize parts
RH 658 L, RH 658 LS
1
2
3
3
4
4
Part numberQuantityRemarkDescriptionNo.3121 0023 011Hexagon 22 x 108 mm + 0.025 mm
7⁄8 in. x 41⁄4 in. + 0.001 in.Rotation chuck bushing1
3100 8478 811+ 0.03 mm+ 0.001 in.
Piston, complete2(3-4)
-1Piston33100 9299 051Rifle nut4
17© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-09
Spare parts listRH 658 L, 658 LS, 658 L-01
RH 658 L-01
1
2
2
3
3
Part numberQuantityRemarkDescriptionNo.3100 8478 811+ 0.03 mm
+ 0.001 in.Piston, complete1(2-3)
-1Piston23100 9299 051Rifle nut3
Rock drill AIR-OIL
Part numberQuantityRemarkDescription8099 0201 0111 l
0.22 gallonRock drill AIR-OIL
8099 0201 81121 l0.22 gallon
Rock drill AIR-OIL
8099 0201 0414 l0.88 gallon
Rock drill AIR-OIL
8099 0201 8444 l0.88 gallon
Rock drill AIR-OIL
8099 0201 10110 l2.2 gallon
Rock drill AIR-OIL
© 2010 Atlas Copco Construction Tools AB | No. 9800 0128 01 | 2010-06-0918
RH 658 L, 658 LS, 658 L-01Spare parts list
Any unauthorized use or copying of the contents or any part thereof is prohibited.This applies in particular to trademarks, model denominations, part numbers, anddrawings.
www.atlascopco.com
©20
10AtlasCop
coCon
structionToolsAB|N
o.98
0001
2801
|201
0-06
-09