Post on 30-Mar-2020
transcript
Due to our program of continuous product development the manufacturer reserves the right to alter specifications without notice.
Australian Pump Industries Pty Ltd | 7 Gladstone Road, Castle Hill NSW 2154 | P: 02 8865 3500 | F: 02 9894 4240 | www.aussiepumps.com.au
Page 1 GMP_Electric_Trash/BF/0119/1
AUSSIE GMP PUMPS ELECTRIC DRIVE SEMI TRASH … 3 YEAR PUMP WARRANTY
Aussie Pumps Reliable Products … Reliable People
Aussie GMP self priming centrifugal electric drive semi trash pumps in 2”, 3” and 4” configurations, designed for high and low pressure operations.
Pumps feature big open impellers, non clog design, silicon carbide mechanical seal, stainless steel wear plate and large front opening port to permit cleaning without pipe work disconnection. Flows available to 2,300 litres per minute and heads to 31 metres.
Available in cast iron , these heavy duty pumps are suitable for a wide range of industrial and agricultural applications.
Applications:
Cast Iron
Industrial waste pump out
Livestock effluent pump out
Public sewage works
Abattoir waste pump out
Piggeries, chicken processing, feed lots
Wash bay water recirculation
Batch plant recirculation
mineral processing
Quarry dewatering
Specifications
Features Benefits
Heavy duty cast construction » Long trouble free life
Open non clog style impeller » Pumps solids in suspension
Self primes from 6 metres vertical lift » Ready to pump in minimum amount of time
Front mounted clean out port » Pump clean out or maintenance without pipe work dismantling
Close coupled to a heavy duty TEFC single or three phase IP rated electric drive motor
» Electric motor convenience with compact design for ease of installation. Motor can be easily disconnected for maintenance without disconnecting pipework.
Stainless steel motor shaft » Corrosion resistant
Cast iron foot mounting on pumps up to 2kW, pumps 4kW & over mounted on steel base plate
» Stable, easy to install
Silicon carbide seals standard on cast iron pumps, other seals available on request
» Flexibility of handled liquids
Stainless steel wear plate » Protects pump from wear, cuts operating costs
Suct/Del Model Motor kW IP rating Total Head (m)
Capacity (l/m)
Solid size (mm)
Cast iron CAT no. (old/current)
1½ x 1½ B1½KQ-A/ST 240v
0.75 54 15 270 11 EA6E
415v EA6F
2” x 2” B2KQ-A/ST 240v
2.2 54 18 440 19 (16 on SS)
EB93
415v EB78
3” x 3”
B3KQ-A/ST 240v
2.2 54 16 900 27 EA3M/EAR5
415v EAR6
B3XR-A/ST 415v
4
55
26 1300 19 EAS1/EAFV
5.5 26 1400 24 EAS3/EANH
7.5 31 1500 24 EAS5/EANL
4” x 4”
B4KQ-A/ST 415v 4 55 14 1600 37 EAR8/EAGF
B4XR-A/ST 415v 11
55 30 2200 35 EADL
15 29 2300 39 EAS7/EANM
Due to our program of continuous product development the manufacturer reserves the right to alter specifications without notice.
Australian Pump Industries Pty Ltd | 7 Gladstone Road, Castle Hill NSW 2154 | P: 02 8865 3500 | F: 02 9894 4240 | www.aussiepumps.com.au
Page 2 GMP_Electric_Trash/BF/0119/1
AUSSIE GMP PUMPS ELECTRIC DRIVE SEMI TRASH … 3 YEAR PUMP WARRANTY
Aussie Pumps Reliable Products … Reliable People
Dimensions:
Model Length - A (mm)
Height - B (mm)
Width - C (mm)
B1½KQ-A/ST 275 285 215
B2KQ-A/ST 410 294 185
B3KQ-A/ST* 485 295 190
Model Length - A (mm)
Height - B (mm)
Width - C (mm)
B3XR-A/ST 4kW 700 450 360
B3XR-A/ST 5.5kW or 7.5kW
790 470 360
B4KQ-A/ST 700 455 360
B4XR-A/ST 1000 544 470
* clean out port is a different shape on this model to that shown in diagram
Full data sheet available for each pump … contact Aussie Pumps
Due to our program of continuous product development the manufacturer reserves the right to alter specifications without notice.
Australian Pump Industries Pty Ltd | 7 Gladstone Road, Castle Hill NSW 2154 | P: 02 8865 3500 | F: 02 9894 4240 | www.aussiepumps.com.au
Page 3 GMP_Electric_Trash/BF/0119/1
AUSSIE GMP PUMPS ELECTRIC DRIVE SEMI TRASH … 3 YEAR PUMP WARRANTY
Aussie Pumps Reliable Products … Reliable People
Performance Curve:
Optional Accessories:
Golden Rule Operate pump at the best efficiency point … 85% of max pump head
Heavy duty galvanised roll frame (standard on diesel drive )
Heavy duty suction hoses 2” and 3”
Medium pressure lay flat delivery hose, working pressure 100 psi
High flow diesel transfer fuel nozzle
Carbon ceramic, silicon carbide, tungsten carbide or Viton seals available
Strainers and couplings
Curves should be used as a guide only. Detailed curves available on request.
Cast Iron