Post on 12-Mar-2020
transcript
BROEN API 6D valves “State of the Art” in Ball Valve Technology
Ballomax
Reliable trunnion mounted ball valve design fully compliant with API 6Dand CSA Z245.15-17 requirements.
• Body options:
- All welded body: no leak paths, preferred for under ground valves.
- Three-piece bolted body: can be repaired as needed, preferred for
above ground valves.
• Size range for standard valves: 2” to 36”, ANSI 150, 300, 600.
More sizes available upon request.
• Temperature range for standard valves: -40°F (-40°C) up to +212°F (+100°C).
• Spring-loaded seat design with unique features:
- The BROEN valves are equipped with Primary Metal Secondary Soft (PMSS) seats: the primary metal seat protects the soft goods
from debris in the � ow path; the HNBR soft seat ensures a positive
seal and a long, worry free valve life.
BROEN is experienced with metal seated valves and other seal
materials. Contact BROEN with any special requirements.
- Self-relieving seat (Single Piston E� ect seat, SPE): the seat
releases any over-pressure in the body cavity to the side of lower
pressure, assuring no excessive pressure within body cavity.
- Double Piston E� ect seat (DPE): any pressure is contained within
the body cavity. An external relief device is recommended to avoid
excessive pressure within the body cavity.
On the left: SPE seat | On the right: DPE seat. Both seats are PMSS.
BROEN BALLOMAX® API 6D Ball Valves www.broen.us
BROEN BALLOMAX® API 6D Ball Valves
The combination of unique seat geometry, innovative materials, balanced spring system makes the BROEN API valves “State of the Art” in Ball Valve Technology
• Stem seal: four levels of protection with o-rings and chevron packing
combined with a lubricant/sealant injection port.
• All valves allow Double Block and Bleed in both open and close position.
• Additional standard features: Fire safe design per API 6FA; bi-directional
valve; anti-static device; anti-blow out stem design.
The value added by BROEN:- Valve Modi� cations: Stem Extensions, Welded Pups, Automation,
Specialty
Coatings all done by the manufacturer in-house under one roof.
- Certi� ed Quality: BROEN is ISO 9001:2015 and API Q1 certi� ed. All
valves tested before shipment.
- Centrally located in Houston Texas, the heart of the Oil and Gas Business.
- Four Regional Territory Managers and Three Master Distributors are
just a phone call away.
- Over 25,000 sqf of Manufacturing and Warehousing space with
inventory for fast deliveries.
- Drafting/engineering capabilities in Houston to design the perfect
solution to your valve needs.
- Since 1998 we strive to maximize satisfaction of our Customers in
North America.
BROEN BALLOMAX® comprehensive product portfolio includes also:- Floating Ball Valves
- Standard Trunnion Ball Valves
- Polyethylene Ball Valves
- Clorius Control Valves
Read more on: www.broen.us
BROEN Inc. Regional Territory Manager Master Distributor
BROEN Inc.27657 Commerce Oaks Drive | Oak Ridge North, Texas 77385 - USA
Tel: +1 713 300 0480 | info@broen.com | www.broen.us
The stem sealing design
BBM
-API
-PB-
2019
-01-
US.
All
right
s res
erve
d.