Post on 19-Aug-2020
transcript
Coalesse Training/Multipurpose Tables Specification Guide 149
Ballet
Ballet
Understanding 150
Specifying
Round Café Tables 158
Arc Tables 159
Non-Folding Teardrop Tables 160
Non-Folding Side Tables 161
Round Pedestal Base Tables 162
Square Pedestal Base Tables 163
Rectangular Folding X-Base Tables 164
Rectangular Non-Folding X-Base Tables 166
Rectangular Folding K-Base Tables 170
Rectangular Non-Folding K-Base Tables 174
Connecting Tops 178
Accessories 179
150 Coalesse Training/Multipurpose Tables Specification Guide
...............................................................................................................................................
...............................................................................................................................................
Coalesse
Ballet
Dual wheel casters are 2"diameter and lock.
Ballet tables form a versatileseries that provides solutionsin a variety of applications—conference, training, work-place, dining, and utility. Baseconfigurations are available infolding and fixed versions.
Modesty panel has a horizon-tal wire management troughfor a clean look.
Cast aluminum legs are avail-able in folding or non-folding,X- and K-bases.
Adjustable leveling glides areincluded for uneven floors.
Top is 1" thick laminate orstraight grain wood veneer.
Seating Capacity GuidelinescSee page 157
Coalesse Training/Multipurpose Tables Specification Guide cBallet, continued 151
Casters can replace glides onmany Ballet tables factoryinstalled. Casters are 2"-diam-eter, locking dual-wheel cast-ers in black plastic and do notalter the table height.
Edges are black ribbed vinylwith matching plastic cornerinserts or Ballet wood edge.
Custom shapes and sizesSpecial table sizes andshapes are possible. To con-firm practicality and obtain aquotation, contact CustomerService at 1.800.627.6770.
Cut-down tops, which arestandard table tops withsmaller dimensions, are avail-able. Use the product numberof the next larger size andspecify the exact dimensionsyou want. Some restrictionsapply, including minimumquantities. This option is notavailable for folding tables.Additional lead times may berequired. Contact Coalessecustomer service at972.641.2860. The followingupcharge applies to cut-downtops, +$373 U.S.Tip: Upcharge for a cut-downtop is applied one time only persize/style number.Tip: Fee is at list and contractdiscounts apply.
Woodgrain laminates arealways oriented with the graindirection running parallel withthe length of the table top. Youcannot specify woodgrain laminates with end- or side-matched grain directions.
Laminate Woodgrain Direction
12'
Vinyl
Wood
Wood edges are not recom-mended on tables with wood-grain laminates becausematching of woodgrain lami-nate and natural, solid wood isnot guaranteed. For tables withwood edge profiles, alwaysspecify either laminates insolid colors or patterns orwood veneer surfaces.Tip: Because of natural varia-tions finished solid wood edgesmay vary slightly in tone orcharacter from each other orfrom the samples Coalesse produces. No guarantee can bemade of an absolutely exactmatch.
Standard veneer grain direc-tions–grain directions aredetermined by the size andshape of the table top. Refer tothe following guidelines forstandard grain directions.
Woodgrain runs parallel to thelength on rectangular and boattops that are 96"L or less.
Grain-matched veneer isavailable at an upcharge incases where you want thegrain direction and pattern tocontinue from one top to anadjacent ganged top. Coalessecan accommodate the continu-ation of veneer grain from oneganged top to the next inalmost all arrangements, usingone of three types of match-ing—end-matched, side-matched, and end-and-sidematched.
Same flitch veneer is alsoavailable for tables that requiresimilar graining and color, butwill not be ganged. For exam-ple, specify same flitch veneerfor two tables used in thesame room, but spaced apart.
Additional lead time may beneeded for grain-matchedveneers. Contact CustomerService at 1.800.627.6770 todiscuss availability.
96"L or smaller
Always include a drawing orsketch along with your specifi-cation showing the arrange-ment of tables you plan so thatwe can ensure proper grainmatching.
Specifying grain-matchedveneers requires an upcharge.Same flitch, end-matched,side-match are 10% of the total list price. End-and-sidematched are 20% of the totallist price.
Same flitch matching is spec-ified in cases where you wantthe veneer grain and patternon two or more tops to comefrom the same flitch of veneer.This ensures a consistentgrain pattern and colorationand should be specified whentops will be used near eachother but not ganged.
Swatch cards and actualsamples of Coalesse stan-dard wood veneers are avail-able from your Coalessecustomer service representa-tive.
Additional wood veneerspecies are available. To con-firm availability and to deter-mine pricing, contact CustomerService at 1.800.627.6770.
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
Solid core tops with 3⁄4" and1" edge thickness have a coreof 45 lb median-density parti-cle board with laminate orstraight-grain wood veneer onthe top and a backer applied tothe opposite side for balance.Laminate and wood veneersurfaces are bonded to thecore with a PVA adhesive in acold press.
Flip-top option is available onpedestal base tables only.
Flip-top mechanism is avail-able on pedestal base tables36"D or less. The flip-topmechanism allows tops to tiltfor more compact storage oftables that are not in use.Safety latch secures the top inflat position and must bereleased to flip top up.Tip: Flip-top tables are notmeant to be used in configura-tions. Tops may not align.
Special table heights may bepractical. To confirmpracticality and obtain a quota-tion, contact Customer Serviceat 1.800.627.6770.
Folding is possible for selectX-base and K-base tables toallow compact storage oftables that are not in use. BothX-base and K-base are 4" thickwhen folded. Folded height is35⁄8".
Backer
Laminateor Veneer
Core
Product Details
Cart is available in two sizes tostore and transport five foldedBallet tables.
Bases are available in threeconfigurations—X-base, K-base, and pedestal base. Baseassemblies are constructed ofdie-cast and extruded alu-minum. X-base and K-baseassemblies are joined by 1" x 3" extruded aluminumstretcher bar for stability. Basefinish can be any powder coatcolor.
Base inset on Ballet K-basetables is 31⁄2".
Base inset on Ballet X-basetables is 10" on tables 60"Land 13" on tables longer than60"L.
Table height is standard at281⁄2"H.
Adjustable leveling glides arenon-marring, black plastic.
10"-13"
31⁄2"
X-base K-base
Pedestal-base
68
44
30"
19"
30"
51
1 ⁄4"
7 ⁄ 16"
1 ⁄2"
Coalesse
Ballet
Ballet
Coalesse
Ballet continued
152 Coalesse Training/Multipurpose Tables Specification Guide
...............................................................................................................................................
...............................................................
...............................................................................................................................................
Grain directions are designated in relation to the dominatedirection of the veneer—often referred to as the cathedral of theveneer. End-matched veneer refers to two pieces of veneer thatmatch at the end of the cathedral. Side matched veneer refers totwo pieces of veneer that match along the side of the cathedrals.
End-matched veneer is specified on tops that will be gangedwith the edges that are perpendicular to the grain directionbutted against each other.
On most tables that are 72"L x 30"W, the veneer grain directionwill be parallel to the 72" side. If you specify end-matched, theveneer grain on one 30" side of one table will continue on one30" side of the adjacent table.
Side matched veneer is specified on tops that will be gangedwith the edges that are parallel to the grain direction buttedagainst each other.
30"
72"
End
CathedralS
ide
On most tables that are 72"L x 30"W, the veneer grain directionwill be parallel to the 72" side. If you specify side-matched, theveneer grain on one 72" side of one table will continue on one72" side of the adjacent table.
End-and-side matched veneer is specified when several topswill be ganged along two or more edges.
30"
72"
30"
72"
Table Top Shape
Edge Alternatives Round Square Rectangular Racetrack Arc Teardrop ConnectingTops
1" Tops
• 1" Ballet vinyl • Available • Available • Available • Available • Available • Available • Available• 1⁄8"D profile with square with square with square
corners only, corners only corners onlyinjection- injection- injection-molded plastic molded plastic molded plastic
• 1" Ballet wood • Available • Available • Available • No • No • No • No*Not available with square with squareon 27" side corners only corners onlytable on non-folding on non-folding
tables tables
36"x96"36"x96"36"36"
Edge Alternatives
Coalesse
Ballet
Coalesse Training/Multipurpose Tables Specification Guide cBallet, continued 153
Flex gangers use a flexible loop that engages a hook to holdtwo adjacent table tops in place. No tools are required to stretchthe loop across the seam between two table edges and to con-nect it to the hook on the adjacent table. Loops that are not inuse can be secured to a parking hook.
Gangers and hooks are installed on the sides of the tables thatare going to be joined. You can specify end-to-end, side-to-side,or end-and-side arrangements.Tip: Not recommended for ganging table tops with wood self edges.
Field-installed flex ganger packages are available to add onsite to tables with vinyl edges or self-edged tables with tops thatare 1"- to 11⁄4"-thick. Specify one package for each seam.
Flex Ganger Style List Price
Package Number U.S. Canada
Flex ganger for 793365L $66 $69Ballet tables only(not for side-to-side ganging)
Tip: Not recommended for ganging table tops with wood edges.
Bar gangers use steel bars to join adjacent tables. One end ofthe bar is captured by the host table and allows the bar to pivotbeneath adjacent table where it is captured by a threaded postwith knob. Factory-installed threaded insert in underside of tabletop accepts the threaded knob. No tools are required to linktables with bar gangers.
Bar ganger
30x60Rizzi
End-to-end
Hooked
Parked
Factory-installed bar ganger inserts are standard on all rec-tangular Ballet tables to allow tables to be joined end-to-endand/or side-to-side. Threaded inserts are available as an optionon Ballet tables with vinyl or self edges. Specify universal gang-ing when you order your tables. You must also order the appro-priate number of ganger packages separately. Order onepackage for each pair of table edges that are going to be joined.Tip: Please send a drawing of your arrangement along with yourorder to ensure that gangers are properly installed.Tip: Not recommended for ganging table tops with wood edges.
Bar ganger packages are available.
Bar Ganger Style List Price
Package Number U.S. Canada
Bar ganger for 793335 $42 $44
11⁄4"-thick tops
Tip: Not recommended for ganging table tops with wood edges.
If your tables are going to be used in a configuration thatrequires ganging, please send us a drawing or sketch so that wecan give you exactly what you want.
30x60Rizzi
End-and-side (Not available on tables with modesty panels.)
30x60Rizzi
Side-to-side (Not available on tables with modesty panels.)
30x60Rizzi
End-to-end
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
Connecting tops can link per-pendicular Ballet tables at 45°,60°, or 90° and expand theuseable area in many differentconfigurations.cSee page 178
Modesty panel is available onmany Ballet tables. Panel isribbed extruded aluminum withpowder coat color and includesa non-exposed horizontal wiremanagement trough.cSee individual product speci-fication pages for availability.
Gangers are available in twotypes—flex and bar. Use flexgangers in situations whentables will frequently be recon-figured and re-ganged. Use bargangers in applications wheretables need to be rigidly linkedfor long periods of time. Flexgangers may be installed in thefactory or on site. Threadedinserts for bar gangers arealways factory installed. Bargangers are field installed.
Flex gangers can be used toeasily link adjacent rectangu-lar, trapezoid, and D-shapedtables in multiple configura-tions. Flex gangers use a flexi-ble loop that engages a hook tohold two adjacent table tops inplace. No tools are required tostretch the loop across theseam between two table edgesand to connect it to the hookon the adjacent table. Loopsthat are not in use can besecured to a parking hook. Tip: Modesty panels would pre-vent gangers from being used onthat side of the table.
Flex ganger
Connections...............................................................................................................................................
Ballet
Coalesse
Ballet continued
154 Coalesse Training/Multipurpose Tables Specification Guide
...............................................................................................................................................
...............................................................................................................................................
Sphere has 3"-diameter opening. Dimensions given are fromcenter of opening and are accurate within 1⁄4" left, right, andcenter are from the user’s perspective. Additional locations arepossible. Contact Customer Service at 1.800.627.6770.
Ballet K-Base (Spheres) A B C20"W 48" 31⁄2" 81⁄2" 24"
60" 31⁄2" 81⁄2" 30"72" 31⁄2" 81⁄2" 36"84" 31⁄2" 81⁄2" 42"
24"W 48" 31⁄2" 81⁄2" 24"60" 31⁄2" 81⁄2" 30"72" 31⁄2" 81⁄2" 36"84" 31⁄2" 81⁄2" 42"
30"W 48" 64⁄25" 81⁄2" 24"60" 64⁄25" 81⁄2" 30"72" 64⁄25" 81⁄2" 36"
Ballet X-base spheres are available for field installation. Tospecify, order the sphere and the table as separate items.Custom locations are possible.
Tip: Custom locations are possible. Custom locations require anengineering review to confirm practicality. Please send a drawing toyour customer service representative to show the locations youwant, confirm practicality, and obtain a quotation.
Please send a drawing of your arrangement along with yourorder to ensure that grommets and spheres are properlyinstalled.
B
A
Left Center
User's Edge
Right
B
C
3
3" opening
15⁄8"
3 ⁄8"
...............................................................................................................................................
Vertical wire manager isavailable to clip on to Ballettable leg to conceal powercords and voice/data cablesrouted vertically from the floorto the worksurface. Verticalwire manager is black plastic.cSee page 179
Technology spider is a cable-management version of thetraditional spider that is usedto attach a table top to a col-umn. The spider providesclearance for power cords andvoice/data cables to passthrough the table top so thatInterport modules, grommets,and spheres can be positioneddirectly above a table base.
Grommets are available fac-tory installed. Locations arelisted in the table below (left,right, center).
Field installation available. Tospecify, order the grommetand the table as separateitems.
Grommet has 2"-diameteropening. Dimensions given arefrom the center of opening andare accurate within 1⁄4". Left,right, and center are from theuser’s perspective.
Wiring & Cabling
Ballet K-Base (Grommets) A B C20"W 48" 31⁄2" 81⁄2" 24"
60" 31⁄2" 81⁄2" 30"72" 31⁄2" 81⁄2" 36"84" 31⁄2" 81⁄2" 42"
24"W 48" 31⁄2" 81⁄2" 24"60" 31⁄2" 81⁄2" 30"72" 31⁄2" 81⁄2" 36"84" 31⁄2" 81⁄2" 42"
30"W 48" 64⁄25" 81⁄2" 24"60" 64⁄25" 81⁄2" 30"72" 64⁄25" 81⁄2" 36"
Ballet X-base grommets are available for field installation. Tospecify, order the grommet and the table as separate items.Custom locations are possible.
Spheres are available factory installed (left, right, center).Locations are listed in the table to the right.
Four simplex power outlets
Two simplex power outletsand two data jack locations
Four data jack locations
Field-installed sphere is practical on many table tops. Orderunit separately and cut the required hole in the table top on site.Installation instructions will be shipped with the sphere.
B
A
Left Center
User's Edge
Right
B
C ...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
Coalesse
Ballet
Coalesse Training/Multipurpose Tables Specification Guide cBallet, continued 155
Interport and Mini-Port areavailable factory cut in customlocations. This processrequires engineering reviewand additional lead time may be required. Tip: Send us a drawing indicating desired location(s). An additional charge may applyif the standard table designrequires modification. Interport and Mini-Port arealso available for field installa-tion. To specify, order theInterport or Mini-Port and thetable as separate items.cSee page 53 for additionalinformation on Interport orMini-Port.
Interact is available factory cutin custom locations. Thisprocess requires engineeringreview and additional lead timemay be required. Tip: Send us a drawing indicating desired location(s). An additional charge may applyif the standard table designrequires modification. cSee page 60 for additionalinformation on Interact.
Power strips are available asan accessory, ordered separately.
Juice requires engineeringreview and additional lead timemay be required. Juice is fieldinstalled and ordered separately.cSee page 44 for additionalinformation on Juice.
Laminates are available in twostandard grades. Additionallaminates from any manufac-turer may also be practical—see below.
Grade 1 laminates include:• Coalesse standard laminatescSee Surface Materials Listing,page 350.• Steelcase standard laminates(code 290A)cSee Steelcase SurfaceMaterials Reference Manual.• Any standard-gradeWilsonart laminate in solidcolor, woodgrain, or patternfinish (code 290A)
Grade 2 laminates (code290B) include any standard-grade, solid color, woodgrain,or patterned laminate fromNevamar (includes Matrix),Formica, or Pionite. Grade 2laminates may have extendedlead times. For details, contactCustomer Service at1.800.627.6770.
Other laminates that are notincluded in the Grade 1 orGrade 2 offerings may also be available, such as AbetLaminati and Laminart. Todetermine availability and pric-ing, contact Customer Serviceat 1.800.627.6770, with thelaminate manufacturer’s nameand the name and number ofthe laminate you want.
Laminate swatches are repro-duced in the Surface MaterialsColor Palettes in the back ofthe book.
Backer
Laminate
Core
Surface Materials Swatch cards and actualsamples of Coalesse stan-dard laminates are availablefrom your Coalesse customerservice representative. Forsamples of laminates fromother manufacturers, contactthem directly:Wilsonart1.800.433.3222Nevamar1.800.638.4380Formica1.800.FORMICAPionite1.800.285.5161Tip: Laminate manufacturerschange their offerings fre-quently. Always check availabil-ity before ordering.
Wood veneer table tops arefabricated with ArchitecturalGrade AA hand-selected hard-wood veneer, plain sliced, bookmatched, and bonded to thecore with a backing sheet forbalance. Coalesse’s primarywood finish, Clarity, is a water-borne UV topcoat, which pro-tects the environment whileproviding exceptional durabilityand resistance to water andchemical stains. Due to naturalvariations in wood, finishedproducts may vary from sam-ples in color, texture, andgrain.
Wood is a natural material;slight variations occur inveneer texture, color, grainconfiguration, and stainacceptance. Coalesse stainsare all applied with an exactingregard for consistency and arewell within traditional toler-ances for wood products. Tip: Finished tops may varyslightly in tone or character fromeach other or from the samplesCoalesse produces. No guaranteecan be made of an absolutelyexact match.
Wood veneer swatches arereproduced in the SurfaceMaterials Color Palettes in theback of the book.cSee Surface Materials Listing,page 350, for a list.
Backer
Veneer
Core
Stains applied to Coalessewood veneer table tops arestandard with the same staincolor applied to both the topand the solid hardwood edgeprofile. Coalesse strives toproduce a consistently highquality product and some natu-ral variation in color is to beexpected. This is especiallyapparent on natural woodswhich have no stain applied,for example 3525 NaturalMaple. This color variation isnormal and reflects the uniqueand natural properties ofwood. This should not be con-sidered a defect.
Stain swatches are repro-duced in the Surface MaterialsColor Palettes in the back ofthe book.
Swatch cards and actualsamples of standard woodveneers are available fromyour Customer Service representative.
Additional wood veneerstains are possible. Coalesseoffers two programs toaccommodate customers whoneed special stains—Stain-to-Match and Stain and Finish toMatch.
Stain-to-Match option is aspecial Coalesse program thatwill match a wood stain sam-ple that you provide. There isno additional charge for thisservice. You must supply asample of reasonable size (3" x3" or larger is usually ade-quate). Coalesse will formulatea stain, produce a matchingsample, and send it to you forapproval. When we receiveyour written approval, we’llschedule production of yourorder.Tip: Stain-to-Match will achievea color match to the sample only.Graining of the wood veneer andfinal surface finish may differfrom your original sample.
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
Stain and Finish to Match is aspecial Coalesse program thatcan achieve both a color and asurface finish match for mostcustomer-supplied samples. Todetermine feasibility and pric-ing, send us a sample of rea-sonable size (3" x 3" or largeris usually adequate) before yousend us your order. If feasible,Coalesse will produce a sam-ple showing the best possiblematch and send it to you forapproval. When we receiveyour written approval, we’llschedule production of yourorder.
Stain formulas for specialstain color matches are allretained in Coalesse’s archivesso that you can refer to themin future orders and skip theapproval steps required for theinitial order.
Table bases are available withtextured powder coat colors.Refer to the individual productspecifying pages for availabil-ity. Powder coat colors areshown in the Surface MaterialsListing, page 350.
...............................................................................................................................................
Ballet
...............................................................................................................................................
...............................................................................................................................................
Coalesse
Ballet continued
156 Coalesse Training/Multipurpose Tables Specification Guide
Laminate and solid phenolicshould be cleaned with soapand water. For stubbornstains, use a non-abrasivehousehold cleaner.
Veneers should be cleanedregularly with mild soap andwater and dried with a softcloth. To polish, use silicone-free household polishers. Use sparingly.Tip: Never use ammonia-basedcleaners or wax on wood surfaces.
Powder coat finishes ontable bases should be cleanedwith a liquid detergent andwater. Remove stubborn stainswith liquid cleanser, such asFormula 409.
Polished aluminum finisheson table bases should becleaned with a commercialpowder, liquid, or paste metalcleaner and polish. Follow themanufacturer’s directions.
Tables should be inspectedand maintained regularly bytightening screws and bolts,inspecting casters and glidesfor damage, and inspecting allmoving parts for damage andwear.
Care & Maintenance...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
...............................................................................................................................................
Coalesse
Ballet Seating Capacity Guidelines
Coalesse Training/Multipurpose Tables Specification Guide 157
Depth Width Approximate Capacity
Round Tops
30" 3
36" 4
Square Tops
30" 30" 4
36" 36" 4
Rectangular Tops
48" 20" 1
60" 20" 2 Ballet K-leg
72" 20" 2 Ballet K-leg
84" 20" 6
48" 24" 1
60" 24" 2 Ballet K-leg
72" 24" 2 Ballet K-leg
84" 24" 3
48" 30" 1 Ballet K-leg
60" 30" 2 Ballet K-leg; 6 Ballet X-leg
72" 30" 2 Ballet K-leg; 6 Ballet X-leg
84" 30" 6
96" 30" 8
60" 36" 6
72" 36" 6
84" 36" 6
96" 36" 8
72" 42" 6
84" 42" 6
96" 42" 8
Seating Capacity Guidelines...............................................................................................................................................
...............................................................................................................................................
Ballet
158 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Round Café Tables
cNeed help?Product details,page 150
• Top: 3⁄4" particle board core with laminate• Edge: black ribbed vinyl• Base: 2" diameter steel column and 4-prong cast
aluminum feet with single powder coat • 19" cast aluminum technology spider• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Edges Wood• Ballet wood edge Prices below Specify with Ballet wood edge.
Dimensions Style Finish U.S. PricesDia H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30" 411⁄2" 933421T Grade 1 Laminate $ 697 $1473
Grade 2 Laminate $ 724 $1500
Grade 1 Wood Veneer $1223 $1999
Grade 2 Wood Veneer $1321 $2097
36" 411⁄2" 934422T Grade 1 Laminate $ 792 $1662
Grade 2 Laminate $ 830 $1700
Grade 1 Wood Veneer $1381 $2251
Grade 2 Wood Veneer $1521 $2391
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 159
Coalesse
Ballet Arc Tables
cNeed help?Product details,page 150
• Top: 1" multi-ply wood core with laminate • Edge: black ribbed vinyl with matching plastic corner
inserts• X-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat color• Threaded inserts in underside of top for end-to-end
ganging• Leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
• Powerstrip cPage 179
Dimensions Style Finish U.S. PriceL W H Number
Ballet RibbedVinyl Edge:
Folding Arc Tables55" 30" 281⁄2" 915415 Grade 1 Laminate $1638
Grade 2 Laminate $1682
82" 30" 281⁄2" 916416 Grade 1 Laminate $1778
Grade 2 Laminate $1845
Non-Folding Arc Tables55" 30" 281⁄2" 915405 Grade 1 Laminate $1395
Grade 2 Laminate $1439
Grade 1 Wood Veneer $2271
Grade 2 Wood Veneer $2466
82" 30" 281⁄2" 916406 Grade 1 Laminate $1477
Grade 2 Laminate $1544
Grade 1 Wood Veneer $2722
Grade 2 Wood Veneer $3047
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: You must send a sampleof reasonable size for Stain-to-Match.
Tip: For installation of agrommet or sphere, submit adrawing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Tip: Shipped knocked down.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
160 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Non-Folding Teardrop Tables
cNeed help?Product details,page 150
• Top: 3⁄4" particle board core with laminate• Edge: black ribbed vinyl• Pedestal base: aluminum with powder coat • 19" cast aluminum technology spider• 2" diameter, locking, dual-wheel casters: black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Glides • Leveling glides in place of –$124 Delete suffix C from the style number.casters: non-marring,black plastic
Dimensions Style Finish U.S. Base PriceL W H Number
Ballet RibbedVinyl Edge:
36" 18" 281⁄2" 921422C Grade 1 Laminate $ 785
Grade 2 Laminate $ 808
Grade 1 Wood Veneer $1555
Grade 2 Wood Veneer $1617
40" 20" 281⁄2" 917422C Grade 1 Laminate $ 812
Grade 2 Laminate $ 835
Grade 1 Wood Veneer $1624
Grade 2 Wood Veneer $1749
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: When specifying glidesheight of table does not change.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 161
Coalesse
Ballet Non-Folding Side Tables
cNeed help?Product details,page 150
• Top: 3⁄4" particle board core with laminate • Edge: black ribbed vinyl• Pedestal base: aluminum with powder coat • 19" cast aluminum technology spider• 2" diameter, locking, dual-wheel casters: black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Glides • Leveling glides in place of –$124 Delete suffix C from the style number.casters: non-marring,black plastic
Dimensions Style Finish U.S. Base PriceDia H Number
Ballet RibbedVinyl Edge:
Round Table27" 251⁄2" 919423C Grade 1 Laminate $ 642
Grade 2 Laminate $ 667
Grade 1 Wood Veneer $1127
Grade 2 Wood Veneer $1189
Racetrack Table36" 251⁄2" 920424C Grade 1 Laminate $ 721
Grade 2 Laminate $ 746
Grade 1 Wood Veneer $1266
Grade 2 Wood Veneer $1364
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to SpecifyTip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: When specifying glidesheight of table does not change.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
162 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Round Pedestal Base Tables
cNeed help?Product details,page 150
• Top: 3⁄4" particle board core with laminate • Edge: black ribbed vinyl• Base: 2" diameter steel column and 4-prong cast
aluminum feet with single powder coat • 19" cast aluminum technology spider• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate or wood color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Edges Wood• Ballet wood edge Prices below Specify with Ballet wood edge.
Flip top • Flip top on tables 36" or less +$141 Add suffix F to the style number.cPage 151
Casters • 2" diameter, locking, dual-wheel +$124 Add suffix C to style number.cPage 151 casters in place of leveling glides:
black plastic
Dimensions Style Finish U.S. Base PricesDia H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30" 281⁄2" 933421 Grade 1 Laminate $ 647 $1367
Grade 2 Laminate $ 672 $1392
Grade 1 Wood Veneer $1134 $1854
Grade 2 Wood Veneer $1232 $1952
36" 281⁄2" 934421 Grade 1 Laminate $ 719 $1525
Grade 2 Laminate $ 754 $1560
Grade 1 Wood Veneer $1265 $2071
Grade 2 Wood Veneer $1405 $2211
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Special table height avail-able, call customer service forquote.
Tip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: If you specify a wood edgeon a top with woodgrain lami-nate, the edge and top may notmatch.
Tip: When specifying castersheight of table does not change.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 163
Coalesse
Ballet Square Pedestal Base Tables
cNeed help?Product details,page 150
• Top: 1" MDF core with laminate• Edge: black ribbed vinyl with matching plastic corner
inserts • Base: 2" diameter steel column and 4-prong cast
aluminum feet with single powder coat • 19" cast aluminum technology spider• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Edges Wood• Ballet wood edge Prices below Specify with Ballet wood edge.
Flip top • Flip top on tables 36" or less +$141 Add suffix F to the style number.cPage 151
Casters • 2" diameter, locking, dual-wheel +$124 Add suffix C to the style number.cPage 151 casters in place of leveling glides:
black plastic
Dimensions Style Finish U.S. Base PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30" 30" 281⁄2" 926421 Grade 1 Laminate $694 $1567
Grade 2 Laminate $719 $1592
Grade 1 Wood Veneer N.A. $2076
Grade 2 Wood Veneer N.A. $2174
36" 36" 281⁄2" 927422 Grade 1 Laminate $759 $1680
Grade 2 Laminate $794 $1715
Grade 1 Wood Veneer N.A. $2294
Grade 2 Wood Veneer N.A. $2434
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: Special table height avail-able, call customer service forquote.
Tip: Shipped knocked down.
Tip: You must send a sample ofreasonable size for Stain-to-Match.
Tip: If you specify a wood edgeon a top with woodgrain lami-nate, the edge and top may notmatch.
Tip: When specifying castersheight of table does not change.
Tip: For installation of a grom-met or sphere, submit a draw-ing indicating the desiredlocation for a factory installedcutout. Field installation is alsoavailable. Both require thegrommet or sphere to beordered as a separate item.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
164 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Rectangular Folding X-Base Tables
cNeed help?Product details,page 150
• Top: 1" multi-ply wood core with laminate • Edge: black ribbed vinyl with matching plastic corner
inserts• X-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat color• Modesty panel with horizontal wire management trough,
if selected: extruded aluminum with powder coat color• Threaded inserts in underside of top for end-to-end
ganging• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Powder coat color number for
modesty panel, if selected5 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below and at right Specify with Grade 2 laminate and select
laminate color number.
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
• Power strips cPage 179
Dimensions Style Finish U.S. PriceL W H Number
Ballet RibbedVinyl Edge:
30"W Rectangular Folding X-Base TablesWithout Modesty Panel
60" 30" 281⁄2" 853411 Grade 1 Laminate $1283
Grade 2 Laminate $1330
72" 30" 281⁄2" 854412 Grade 1 Laminate $1317
Grade 2 Laminate $1374
84" 30" 281⁄2" 855413 Grade 1 Laminate $1491
Grade 2 Laminate $1559
96" 30" 281⁄2" 856414 Grade 1 Laminate $1564
Grade 2 Laminate $1639
With Modesty Panel
60" 30" 281⁄2" 853461 Grade 1 Laminate $1605
Grade 2 Laminate $1652
72" 30" 281⁄2" 854462 Grade 1 Laminate $1648
Grade 2 Laminate $1705
84" 30" 281⁄2" 855463 Grade 1 Laminate $1827
Grade 2 Laminate $1895
96" 30" 281⁄2" 856464 Grade 1 Laminate $1907
Grade 2 Laminate $1982
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: For installation of grom-mets, spheres, Mini-Port,Interport, and/or Interact,submit a drawing indicatingthe desired location for a fac-tory installed cutout(s). Fieldinstallation is also available.All require the grommet(s),sphere(s), Mini-Port,Interport, and/or Interact tobe ordered as a separate item.
Tip: Shipped assembled.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 165
Coalesse
Ballet Rectangular Folding X-Base Tables
Dimensions Style Finish U.S. PriceL W H Number
Ballet RibbedVinyl Edge:
36"W Rectangular Folding X-Base Tables Without Modesty Panel
60" 36" 281⁄2" 823411 Grade 1 Laminate $1347
Grade 2 Laminate $1404
72" 36" 281⁄2" 824412 Grade 1 Laminate $1373
Grade 2 Laminate $1442
84" 36" 281⁄2" 825413 Grade 1 Laminate $1523
Grade 2 Laminate $1602
96" 36" 281⁄2" 826414 Grade 1 Laminate $1648
Grade 2 Laminate $1737
With Modesty Panel
60" 36" 281⁄2" 823461 Grade 1 Laminate $1668
Grade 2 Laminate $1725
72" 36" 281⁄2" 824462 Grade 1 Laminate $1704
Grade 2 Laminate $1773
84" 36" 281⁄2" 825463 Grade 1 Laminate $1858
Grade 2 Laminate $1937
96" 36" 281⁄2" 826464 Grade 1 Laminate $1994
Grade 2 Laminate $2083
42"W Rectangular Folding X-Base Tables Without Modesty Panel
72" 42" 281⁄2" 814412 Grade 1 Laminate $1777
Grade 2 Laminate $1856
84" 42" 281⁄2" 815413 Grade 1 Laminate $1806
Grade 2 Laminate $1899
96" 42" 281⁄2" 816414 Grade 1 Laminate $1865
Grade 2 Laminate $1970
With Modesty Panel
72" 42" 281⁄2" 814462 Grade 1 Laminate $2094
Grade 2 Laminate $2173
84" 42" 281⁄2" 815463 Grade 1 Laminate $2140
Grade 2 Laminate $2233
96" 42" 281⁄2" 816464 Grade 1 Laminate $2210
Grade 2 Laminate $2315
Specification Information
cSpecification Information, continued from previous page
Tip: Juice can be ordered on36"L and 42"L tables for fieldinstallation only. It must beordered as a separate item.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
166 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Rectangular Non-Folding X-Base Tables
cNeed help?Product details,page 150
• Top: 1" MDF core with laminate • Edge: black ribbed vinyl with matching plastic corner
inserts • X-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat color• Modesty panel with horizontal wire management trough,
if selected: extruded aluminum with powder coat • Threaded inserts in underside of top for end-to-end
ganging• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Powder coat color number for
modesty panel, if selected5 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below and at right Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices below and at right Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices below and at right Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Edges Wood• Ballet wood edge Prices below and at right Specify with Ballet wood edge.
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
Dimensions Style Finish U.S. PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30"W Rectangular Non-Folding X-Base Tables Without Modesty Panel
60" 30" 281⁄2" 873401 Grade 1 Laminate $1203 $1826
Grade 2 Laminate $1250 $1873
Grade 1 Wood Veneer N.A. $2626
Grade 2 Wood Veneer N.A. $2821
72" 30" 281⁄2" 874402 Grade 1 Laminate $1241 $2002
Grade 2 Laminate $1298 $2059
Grade 1 Wood Veneer N.A. $2824
Grade 2 Wood Veneer N.A. $3058
84" 30" 281⁄2" 875403 Grade 1 Laminate $1411 $2034
Grade 2 Laminate $1479 $2102
Grade 1 Wood Veneer N.A. $3262
Grade 2 Wood Veneer N.A. $3587
96" 30" 281⁄2" 876404 Grade 1 Laminate $1487 $2111
Grade 2 Laminate $1562 $2186
Grade 1 Wood Veneer N.A. $3423
Grade 2 Wood Veneer N.A. $3798
cSpecification Information, continued on next page
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: You must send a sampleof reasonable size for Stain-to-Match.
Tip: If you specify a woodedge on a top with woodgrainlaminate, the edge and topmay not match.
Tip: For installation of grom-mets, spheres, Mini-Port,Interport, and/or Interact,submit a drawing indicatingthe desired location for a fac-tory installed cutout(s). Fieldinstallation is also available.All require the grommet(s),sphere(s), Mini-Port,Interport, and/or Interact tobe ordered as a separate item.
Tip: Shipped knocked down.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide cRectangular Non-Folding X-Base Tables, continued 167
Coalesse
Ballet Rectangular Non-Folding X-Base Tables
Dimensions Style Finish U.S. PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30"W Rectangular Non-Folding X-Base Tables With Modesty Panel
60" 30" 281⁄2" 873451 Grade 1 Laminate $1526 $2149
Grade 2 Laminate $1573 $2196
Grade 1 Wood Veneer N.A. $2949
Grade 2 Wood Veneer N.A. $3144
72" 30" 281⁄2" 874452 Grade 1 Laminate $1569 $2330
Grade 2 Laminate $1626 $2387
Grade 1 Wood Veneer N.A. $3152
Grade 2 Wood Veneer N.A. $3386
84" 30" 281⁄2" 875453 Grade 1 Laminate $1749 $2372
Grade 2 Laminate $1817 $2440
Grade 1 Wood Veneer N.A. $3600
Grade 2 Wood Veneer N.A. $3925
96" 30" 281⁄2" 876454 Grade 1 Laminate $1829 $2453
Grade 2 Laminate $1904 $2528
Grade 1 Wood Veneer N.A. $3765
Grade 2 Wood Veneer N.A. $4140
36"W Rectangular Non-Folding X-Base Tables Without Modesty Panel
60" 36" 281⁄2" 883401 Grade 1 Laminate $1267 $2003
Grade 2 Laminate $1324 $2060
Grade 1 Wood Veneer N.A. $2774
Grade 2 Wood Veneer N.A. $3008
72" 36" 281⁄2" 884402 Grade 1 Laminate $1293 $2030
Grade 2 Laminate $1362 $2099
Grade 1 Wood Veneer N.A. $2799
Grade 2 Wood Veneer N.A. $3080
84" 36" 281⁄2" 885403 Grade 1 Laminate $1444 $2181
Grade 2 Laminate $1523 $2260
Grade 1 Wood Veneer N.A. $3431
Grade 2 Wood Veneer N.A. $3776
96" 36" 281⁄2" 886404 Grade 1 Laminate $1569 $2306
Grade 2 Laminate $1658 $2395
Grade 1 Wood Veneer N.A. $3499
Grade 2 Wood Veneer N.A. $3899cSpecification Information, continued on next page
Specification Information
cSpecification Information, continued from previous page
Tip: Juice can be ordered on36"L and 42"L tables for fieldinstallation only. It must beordered as a separate item.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
168 Coalesse Training/Multipurpose Tables Specification Guide
Dimensions Style Finish U.S. PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
36"W Rectangular Non-Folding X-Base Tables With Modesty Panel
60" 36" 281⁄2" 883451 Grade 1 Laminate $1589 $2325
Grade 2 Laminate $1646 $2382
Grade 1 Wood Veneer N.A. $3096
Grade 2 Wood Veneer N.A. $3330
72" 36" 281⁄2" 884452 Grade 1 Laminate $1622 $2359
Grade 2 Laminate $1691 $2428
Grade 1 Wood Veneer N.A. $3128
Grade 2 Wood Veneer N.A. $3409
84" 36" 281⁄2" 885453 Grade 1 Laminate $1782 $2519
Grade 2 Laminate $1861 $2598
Grade 1 Wood Veneer N.A. $3769
Grade 2 Wood Veneer N.A. $4114
96" 36" 281⁄2" 886454 Grade 1 Laminate $1915 $2652
Grade 2 Laminate $2004 $2741
Grade 1 Wood Veneer N.A. $3845
Grade 2 Wood Veneer N.A. $4245
42"W Rectangular Non-Folding X-Base Tables Without Modesty Panel
72" 42" 281⁄2" 834402 Grade 1 Laminate $1686 $2423
Grade 2 Laminate $1765 $2502
Grade 1 Wood Veneer N.A. $3447
Grade 2 Wood Veneer N.A. $3738
84" 42" 281⁄2" 835403 Grade 1 Laminate $1726 $2463
Grade 2 Laminate $1819 $2556
Grade 1 Wood Veneer N.A. $3607
Grade 2 Wood Veneer N.A. $3982
96" 42" 281⁄2" 836404 Grade 1 Laminate $1787 $2524
Grade 2 Laminate $1892 $2629
Grade 1 Wood Veneer N.A. $3656
Grade 2 Wood Veneer N.A. $4106cSpecification Information, continued on next page
Specification Information
cSpecification Information, continued from previous page
Coalesse
Ballet Rectangular Non-Folding X-Base Tables continued
Tip: Juice can be ordered on36"L and 42"L tables for fieldinstallation only. It must beordered as a separate item.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 169
Coalesse
Ballet Rectangular Non-Folding X-Base Tables
Dimensions Style Finish U.S. PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
42"W Rectangular Non-Folding X-Base Tables With Modesty Panel
72" 42" 281⁄2" 834452 Grade 1 Laminate $2013 $2750
Grade 2 Laminate $2092 $2829
Grade 1 Wood Veneer N.A. $3774
Grade 2 Wood Veneer N.A. $4065
84" 42" 281⁄2" 835453 Grade 1 Laminate $2064 $2801
Grade 2 Laminate $2157 $2894
Grade 1 Wood Veneer N.A. $3945
Grade 2 Wood Veneer N.A. $4320
96" 42" 281⁄2" 836454 Grade 1 Laminate $2133 $2870
Grade 2 Laminate $2238 $2975
Grade 1 Wood Veneer N.A. $4002
Grade 2 Wood Veneer N.A. $4452
Specification Information
cSpecification Information, continued from previous page
Tip: Juice can be ordered on36"L and 42"L tables for fieldinstallation only. It must beordered as a separate item.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
170 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Rectangular Folding K-Base Tables
cNeed help?Product details,page 150
• Top: 1" multi-ply wood core with laminate • Edge: black vinyl with matching plastic corner inserts• K-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat • Modesty panel with horizontal wire management trough,
if selected: extruded aluminum with powder coat • Threaded inserts in underside of top for end-to-end
ganging• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Powder coat color number for
modesty panel, if selected5 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices at right Specify with Grade 2 laminate and select
laminate color number.
Grommets • One grommet: black plastic +$ 60 Specify with grommet and select location of cPage 154 left, right, or center.
• Two grommets: black plastic +$120 Specify with two grommets and select location of left/center, right/center, or right/left.
• Three grommets: black plastic +$180 Specify with three grommets.
Spheres Factory-installed opening andcPage 154 sphere to be installed on site:
black plastic only• CSP = Four data jack locations +$153 each Specify with CSP sphere and select location
of left, right, or center. • PCS = Two simplex power outlets +$232 each Specify with PCS sphere and select location
and two data jack locations of left, right, or center. • PSP = Four simplex power +$338 each Specify with PSP sphere and select location
of left, right, or center.
Casters • 2" diameter, locking, dual-wheel +$ 55 Add suffix C to the style number.cPage 151 casters in place of leveling glides
on back legs of tables that are72"L or less: black plastic
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
• Power strips cPage 179
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: When three grommets arespecified, grommets will belocated left, right, and center.
Tip: For sphere location avail-ability see page 154.
Tip: If RJ11 or RJ45 data jackcouplers are needed on PCSor CSP they must be orderedseparately.
Tip: When specifying casters,height of table does notchange.
Tip: For installation ofInterport, Mini-Port, orInteract, submit a drawingindicating the desired locationfor a factory installed cutout.Field-installtion is also avail-able for Interport and Mini-Port. All require the Interport,Mini-Port or Interact to beordered as a separate item.
Tip: Shipped assembled.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide cRectangular Folding K-Base Tables, continued 171
Coalesse
Ballet Rectangular Folding K-Base Tables
Dimensions Style Finish U.S. Base PriceL W H Number
Ballet RibbedVinyl Edge:
20"W Rectangular Folding K-Base TablesWithout Modesty Panel
48" 20" 281⁄2" 842511 Grade 1 Laminate $1193
Grade 2 Laminate $1218
60" 20" 281⁄2" 843512 Grade 1 Laminate $1264
Grade 2 Laminate $1295
72" 20" 281⁄2" 844513 Grade 1 Laminate $1298
Grade 2 Laminate $1335
With Modesty Panel
48" 20" 281⁄2" 842561 Grade 1 Laminate $1523
Grade 2 Laminate $1548
60" 20" 281⁄2" 843562 Grade 1 Laminate $1600
Grade 2 Laminate $1631
72" 20" 281⁄2" 844563 Grade 1 Laminate $1643
Grade 2 Laminate $1680
24"W Rectangular Folding K-Base TablesWithout Modesty Panel
48" 24" 281⁄2" 802511 Grade 1 Laminate $1226
Grade 2 Laminate $1255
60" 24" 281⁄2" 803512 Grade 1 Laminate $1293
Grade 2 Laminate $1330
72" 24" 281⁄2" 804513 Grade 1 Laminate $1332
Grade 2 Laminate $1377
With Modesty Panel
48" 24" 281⁄2" 802561 Grade 1 Laminate $1554
Grade 2 Laminate $1583
60" 24" 281⁄2" 803562 Grade 1 Laminate $1630
Grade 2 Laminate $1667
72" 24" 281⁄2" 804563 Grade 1 Laminate $1676
Grade 2 Laminate $1721
cSpecification Information, continued on next page
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
172 Coalesse Training/Multipurpose Tables Specification Guide
Dimensions Style Finish U.S. Base PriceL W H Number
Ballet RibbedVinyl Edge:
30"W Rectangular Folding K-Base Tables Without Modesty Panel
48" 30" 281⁄2" 902511 Grade 1 Laminate $1529
Grade 2 Laminate $1566
60" 30" 281⁄2" 903512 Grade 1 Laminate $1617
Grade 2 Laminate $1664
72" 30" 281⁄2" 904513 Grade 1 Laminate $1810
Grade 2 Laminate $1867
With Modesty Panel
48" 30" 281⁄2" 902561 Grade 1 Laminate $1860
Grade 2 Laminate $1897
60" 30" 281⁄2" 903562 Grade 1 Laminate $1953
Grade 2 Laminate $2000
72" 30" 281⁄2" 904563 Grade 1 Laminate $2154
Grade 2 Laminate $2211
Specification Information
Coalesse
Ballet Rectangular Folding K-Base Tables continued
cSpecification Information, continued from previous page
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 173
Coalesse
Ballet Rectangular Folding K-Base Tables
Ballet
174 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Rectangular Non-Folding K-Base Tables
cNeed help?Product details,page 150
• Top: 1" MDF core with laminate• Edge: black ribbed vinyl with matching plastic corner
inserts • K-base: cast aluminum legs and 1" x 3" extruded aluminum
stretcher bar between legs with single powder coat • Threaded inserts in underside of top for end-to-end
ganging• Adjustable leveling glides: non-marring, black plastic
1 Style number2 Powder coat color number for base3 Laminate color number for top4 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices at right Specify with Grade 2 laminate and select
color number.• Wood veneer Grade 1 Prices at right Specify with wood veneer Grade 1 and select
color number.• Wood veneer Grade 2 Prices at right Specify with wood veneer Grade 2 and select
color number.• Stain-to-Match No cost Specify with Stain-to-Match.
cPage 5
Edges Wood• Ballet wood edge Prices at right Specify with Ballet wood edge.
Grommets • One grommet: black plastic +$ 60 Specify with grommet and select location of cPage 154 left, right, or center.
• Two grommets: black plastic +$120 Specify with two grommets and select location of left/center, right/center, or right/left.
• Three grommets: black plastic +$180 Specify with three grommets.
Spheres Factory-installed opening andcPage 154 sphere to be installed on site:
black plastic only• CSP = Four data jack locations +$153 each Specify with CSP sphere and select location
of left, right, or center. • PCS = Two simplex power outlets +$232 each Specify with PCS sphere and select location
and two data jack locations of left, right, or center. • PSP = Four simplex power +$338 each Specify with PSP sphere and select location
of left, right, or center.
Casters • 2" diameter, locking, dual-wheel +$ 55 Add suffix C to the style number.cPage 151 casters in place of leveling glides
on back legs of tables that are72"L or less: black plastic
Related • Bar ganger package cPage 179Products • Flex ganger package cPage 180
• Power strips cPage 179
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Tip: You must send a sampleof reasonable size for Stain-to-Match.
Tip: If you specify a woodedge on a top with woodgrainlaminate, the edge and topmay not match.
Tip: When three grommets arespecified, grommets will belocated left, right, and center.
Tip: For sphere location avail-ability see page 154.
Tip: If RJ11 or RJ45 data jackcouplers are needed on PCSor CSP they must be orderedseparately.
Tip: When specifying casters,height of table does notchange.
Tip: For installation ofInterport, Mini-Port, orInteract, submit a drawingindicating the desired locationfor a factory installed cutout.Field-installtion is also avail-able for Interport and Mini-Port. All require the Interport,Mini-Port, or Interact to beordered as a separate item.
Tip: Shipped knocked down.
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide cRectangular Non-Folding K-Base Tables, continued 175
Coalesse
Ballet Rectangular Non-Folding K-Base Tables
Dimensions Style Finish U.S. Base PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
20"W Rectangular Non-Folding K-Base TablesWithout Modesty Panel
48" 20" 281⁄2" 892501 Grade 1 Laminate $1155 $1778
Grade 2 Laminate $1181 $1804
Grade 1 Wood Veneer N.A. $2305
Grade 2 Wood Veneer N.A. $2430
60" 20" 281⁄2" 893502 Grade 1 Laminate $1226 $1928
Grade 2 Laminate $1258 $1960
Grade 1 Wood Veneer N.A. $2536
Grade 2 Wood Veneer N.A. $2692
72" 20" 281⁄2" 894503 Grade 1 Laminate $1258 $1960
Grade 2 Laminate $1295 $1997
Grade 1 Wood Veneer N.A. $2576
Grade 2 Wood Veneer N.A. $2763
With Modesty Panel
48" 20" 281⁄2" 892551 Grade 1 Laminate $1486 $2109
Grade 2 Laminate $1512 $2135
Grade 1 Wood Veneer N.A. $2636
Grade 2 Wood Veneer N.A. $2761
60" 20" 281⁄2" 893552 Grade 1 Laminate $1562 $2264
Grade 2 Laminate $1594 $2296
Grade 1 Wood Veneer N.A. $2872
Grade 2 Wood Veneer N.A. $3028
72" 20" 281⁄2" 894553 Grade 1 Laminate $1606 $2308
Grade 2 Laminate $1643 $2345
Grade 1 Wood Veneer N.A. $2924
Grade 2 Wood Veneer N.A. $3111
cSpecification Information, continued on next page
Specification Information
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
176 Coalesse Training/Multipurpose Tables Specification Guide
Dimensions Style Finish U.S. Base PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
24"W Rectangular Non-Folding K-Base TablesWithout Modesty Panel
48" 24" 281⁄2" 862501 Grade 1 Laminate $1187 $1810
Grade 2 Laminate $1218 $1841
Grade 1 Wood Veneer N.A. $2337
Grade 2 Wood Veneer N.A. $2462
60" 24" 281⁄2" 863502 Grade 1 Laminate $1254 $1956
Grade 2 Laminate $1291 $1993
Grade 1 Wood Veneer N.A. $2564
Grade 2 Wood Veneer N.A. $2720
72" 24" 281⁄2" 864503 Grade 1 Laminate $1290 $1992
Grade 2 Laminate $1335 $2037
Grade 1 Wood Veneer N.A. $2608
Grade 2 Wood Veneer N.A. $2795
With Modesty Panel
48" 24" 281⁄2" 862551 Grade 1 Laminate $1516 $2139
Grade 2 Laminate $1547 $2170
Grade 1 Wood Veneer N.A. $2666
Grade 2 Wood Veneer N.A. $2791
60" 24" 281⁄2" 863552 Grade 1 Laminate $1594 $2296
Grade 2 Laminate $1631 $2333
Grade 1 Wood Veneer N.A. $2904
Grade 2 Wood Veneer N.A. $3060
72" 24" 281⁄2" 864553 Grade 1 Laminate $1638 $2340
Grade 2 Laminate $1683 $2385
Grade 1 Wood Veneer N.A. $2956
Grade 2 Wood Veneer N.A. $3143cSpecification Information, continued on next page
Specification Information
Coalesse
Ballet Rectangular Non-Folding K-Base Tables continued
cSpecification Information, continued from previous page
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide 177
Coalesse
Ballet Rectangular Non-Folding K-Base Tables
Dimensions Style Finish U.S. Base PricesL W H Number
Ballet Ribbed Ballet Vinyl Edge: Wood Edge:
30"W Rectangular Non-Folding K-Base TablesWithout Modesty Panel
48" 30" 281⁄2" 912501 Grade 1 Laminate $1491 $2114
Grade 2 Laminate $1528 $2151
Grade 1 Wood Veneer N.A. $2648
Grade 2 Wood Veneer N.A. $2804
60" 30" 281⁄2" 913502 Grade 1 Laminate $1576 $2281
Grade 2 Laminate $1623 $2328
Grade 1 Wood Veneer N.A. $2893
Grade 2 Wood Veneer N.A. $3088
72" 30" 281⁄2" 914503 Grade 1 Laminate $1771 $2476
Grade 2 Laminate $1828 $2533
Grade 1 Wood Veneer N.A. $3095
Grade 2 Wood Veneer N.A. $3329
With Modesty Panel
48" 30" 281⁄2" 912551 Grade 1 Laminate $1822 $2445
Grade 2 Laminate $1859 $2482
Grade 1 Wood Veneer N.A. $2979
Grade 2 Wood Veneer N.A. $3135
60" 30" 281⁄2" 913552 Grade 1 Laminate $1915 $2620
Grade 2 Laminate $1962 $2667
Grade 1 Wood Veneer N.A. $3232
Grade 2 Wood Veneer N.A. $3427
72" 30" 281⁄2" 914553 Grade 1 Laminate $2115 $2820
Grade 2 Laminate $2172 $2877
Grade 1 Wood Veneer N.A. $3439
Grade 2 Wood Veneer N.A. $3673
Specification Information
cSpecification Information, continued from previous page
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
178 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Connecting Tops
cNeed help?Product details,page 150
• Top: 1" MDF core with laminate surface• Edge: black ribbed vinyl with matching plastic corner
inserts• Connecting hardware to attach to adjacent tables
1 Style number2 Laminate color number for top3 Options, if selected (see below)cSee Surface Materials, page 350.
Surface TopMaterials • Grade 2 laminate Prices below Specify with Grade 2 laminate and select
laminate color number.
Dimension Style Finish U.S. PriceWidth Number
Ballet RibbedVinyl Edge:
45° Connecting Tops20" 847000 Grade 1 Laminate $362
Grade 2 Laminate $393
24" 807000 Grade 1 Laminate $392
Grade 2 Laminate $423
30" 907000 Grade 1 Laminate $447
Grade 2 Laminate $478
60° Connecting Tops20" 848000 Grade 1 Laminate $385
Grade 2 Laminate $416
24" 808000 Grade 1 Laminate $415
Grade 2 Laminate $446
30" 908000 Grade 1 Laminate $470
Grade 2 Laminate $501
90° Connecting Tops20" 849000 Grade 1 Laminate $409
Grade 2 Laminate $440
24" 809000 Grade 1 Laminate $440
Grade 2 Laminate $471
30" 909000 Grade 1 Laminate $496
Grade 2 Laminate $527
Specification Information
Options U.S. Price Required to Specify
Standard Includes Required to Specify
Veneer direction
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Coalesse Training/Multipurpose Tables Specification Guide cAccessories, continued 179
Coalesse
Ballet Accessories
cNeed help?Product details,page 150
• Power strip with 15' cord and three-prong plug: black• Six power outlets• On-off switch• Surge suppressor
Style number
Dimensions Style U.S. L D W Number Price
16" 3⁄4" 21⁄4" 793330 $192
Specification Information
Standard Includes Required to Specify
Power Strip
cNeed help?Product details,page 150
• Vertical wire manager to attach to Ballet K-legs:black plastic only
Style number
Dimensions Style U.S. L D W Number Price
3⁄4" 1" 17" 793332 $23
Specification Information
Standard Includes Required to Specify
Vertical Wire Manager
cNeed help?Product details,page 150
• Two field-installed steel bars and four threaded handknobs: black steel only
Style number
Style U.S. Number Price
793335 $42
Specification Information
Standard Includes Required to Specify
Bar Ganger Package
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.
Ballet
180 Coalesse Training/Multipurpose Tables Specification Guide
Coalesse
Ballet Accessories continued
cNeed help?Product details,page 150
• Two field-installed flexible ganger loops and four hooks:black plastic only
• Installation instructions
Style number
Style U.S. Number Price
793365L $66
Specification Information
Standard Includes Required to Specify
Flex Ganger Package
Tip: Order one ganger packagefor each table-to-tablecombination.
Tip: Not for side-to-sideganging.
Tip: Not recommended forganging table tops with woodedges.
cNeed help?Product details,page 150
• Cart to accommodate up to five folding Ballet tables:black only
• Bumpers: black
Style number
Style U.S. Number Price
45"L to Accommodate 48"L, 60"L, or 72"L Tables793333 $1648
62"L to Accommodate 84"L or 96"L Tables793334 $1726
Specification Information
Standard Includes Required to Specify
Mobile Storage Carts
68
44
30"
19"
51
1 ⁄4"
1 ⁄2"
7 ⁄ 16"
Tip: Shipped knocked down.
For Canadian PricingMultiply U.S. Price by the Canadian price factor.
See page 1 for details.