Post on 29-Dec-2015
transcript
BCSAR Training
Communications
&
Two-Way Radio
Purpose
• Give Members greater understanding– BCSAR – VHF– BCSO – UHF– BCSO – Trunked– Other & Mutual Aid
• Improve communications
• Keep us out of trouble!
Relm HandheldAntenna
Power Sw & Volume ControlSquelch
Channel Selector
TX Light
Lapel Mic Connector(Behind Controls)
Channel Display **
ChannelKeypad
BatteryBatteryReleaseButton
Tone Monitor(not used)
Priority
Scan Add/Del
Scan
DisplayBacklight
Func Button*Transmit
Push-to-Talk
* Func (hold) & 1 is Tx Power (High or Low) Func (hold & 2 is Keypad Lock Func (hold) & 3 is Keypad Push Beep Func (hold) & Backlight is the backlight on without a timer. Func (hold) & Scan (M/S) is Channel Frequency Readout. Func (hold) & Priority (Pri) sets the current channel as the priority channel.
** A little ‘P’ means Priority is turned ON A big ‘P’ means that ch. is the priority ch. A ‘Hi’ means high Tx power. A ‘F/L’ means keypad is locked. A ‘flashing’ display means low battery.
SpeakerMicrophone
Kenwood TK-760 Mobile
Controls
Ch Up Ch Dn Vol Up Vol Dn
ScanMic Connector
PowerChannel Display
Monitor HomeChTaylor
ScanDel &Add
NotProgrammed
BCSAR Radio Channel Plan
• Ch-1 Taylor Mtn Repeater
• Ch-2 Car-to-Car• Ch-3 Black Mtn Repeater• Ch-4 Kelly Mtn Repeater
• Other – Mutual Aid• Ch-5 EMS F2 155.280• Ch-7 MRA 155.160• Ch-8 Clark Co SAR• Ch-9 Idaho SAR 155.265• Ch-11 Bannock SAR• Ch-12 Valley All Call• Ch-13 Swan-Valley Anb
Radio Coverage (HH)Taylor Mtn
Radio Coverage (HH)Black Mtn
Radio Coverage (HH)Kelly Mtn
Radio Coverage (HH)Combined