Post on 09-Feb-2019
transcript
BENCHMARK by Kingspan
EvolutionPanelised Façade Systems
-Evolution Axis
Evolution RecessEvolution Multi-groove
Evolution RevealEvolution Reveal Recess
Horizontal 150mm ECOsafe® PIR BENCHMARK Evolution Axis Panel has been tested to BS8414-2 and meets the requirements of BR 135 for facades with a storey above 18m.
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Evolution
Inspiration
– Evolution Axis
– Evolution Recess
– Evolution Multi-groove
– Evolution Reveal
– Evolution Reveal Recess
– Toyota
– St. Joseph’s
– Elutec
– Louis Blériot High School
– Garonor Business Park
– Buhrer & Wehling
– Lion Products Bonheiden
– Loda Office
– Adolf Papeleupark
– Hastings District Court House
– Steen Invest Leeuwarden
– TNT Green Office
– Oranjewoud Oosterhout Netherlands
Testing and Accreditation
Customising Your Building
– Fire Testing
– Kingspan Compliance Assured
– System Performance
– Accreditation
– Build Speed
12-13
14-15
16
17
18-19
4-5
6-7
8-9
10
11
20-21
22-23
24-25
26
26
27
28
28
28
29
30-31
32-33
34
34
35
– Corners and Top hats
– Evolution Textured
For BENCHMARK by Kingspan's Fire Testand Certification Programme turn to page 13
- BS 8414 - 2 - CWCT - LPCB - FM
2
Evolution
Evolution - the single component, single fix panelised facade system
Evolution has the look and feel of a super smooth rainscreen façade with the advantage of single point installation and excellent thermal performance. The system meets or exceeds all the statutory regulation criteria, such as structural, thermal, acoustic and durability performance, offers a sustainable rated solution and, most importantly of all, provides life and property fire safety protection.
TNT Green Office HoofddorpNetherlands
ProductEvolution Axis —ArchitectArchitectenbureau Paul de Ruiter
Horizontal 150mm ECOsafe® PIR BENCHMARK Evolution Axis Panel has been tested to BS8414-2 and meets the requirements of BR 135 for facades with a storey above 18m.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
— Design flexibility
— Wide range of flat solid and metallic colours
— Superior non-profiled panel
— Module sizes to suit architectural design
— Available in standard and bespoke sizes
— Façade aesthetics and design flexibility
— Vertical and horizontal installation
— Up to 40 years thermal and structure guarantee
— Lightweight and fast installation
— High thermal performance
4
Core Thickness (mm) 45 60 70 80 100 120 140 150
U-Value (W/m 2K) 0.52 0.35 0.30 0.26# 0.21# 0.18# 0.15# 0.13#
Weight kg/m2 10.9 11.5 11.9 12.3 13.1 13.9 14.6 15.0
Evolution Axis
Performance U Value
1,800mm to 17,000mm
600m
m to
1000
mm
Evolution AxisEvolution Axis is a highly streamlined, sleek unprofiled insulated panel system; the perfect solution if you are looking to achieve a minimalist façade on buildings with large flat surface areas. Smooth and flawless in appearance. Length 1.8 to 17m, bespoke cover widths 600mm to 1000mm - in 1mm (subject to MOQ) increments available 600/900/1000mm standard sizes.
Insurer-approved and accredited Kingspan FIREsafe® PIR insulated panel system
Horizontal 150mm ECOsafe® PIR BENCHMARK Evolution Axis Panel has been tested to BS8414-2 and meets the requirements of BR 135 for facades with a storey above 18m.
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
6
Evolution RecessEvolution Recess features depth and dimension through the folding of the panel edge and the insertion of a 10mm or 20mm gasket between the panels, creating a unique 3D effect.
Length 1.8 to 8m, bespoke cover widths 600mm to 1000mm - in 1mm (subject to MOQ) increments available 600/900/1000mm standard sizes.
Performance U Value
Core Thickness (mm) 45 60 70 80 100 120 140 150
U-Value (W/m 2K) 0.52 0.35 0.30 0.26# 0.21# 0.18# 0.15# 0.13#
Weight kg/m2 10.9 11.5 11.9 12.3 13.1 13.9 14.6 15.0
Evolution Recess
1,800mm to 8000mm
600m
m to
1000
mm
Insurer-approved and accredited Kingspan FIREsafe® PIR insulated panel system
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Evolution Recess 10mm gasket between panels
Evolution Recess 20mm gasket between panels
8
Evolution Multi-grooveEvolution Multi-groove is a premium flat panel that has one or two grooves engineered into its surface, creating subtle shadow lines on the building’s façade and an illusion of smaller panel widths without the installation time constraints.
Length 1.8 to 17m, increments available 900mm and 1000mm standard sizes.
Performance U Value
Core Thickness (mm) 45 60 70 80 100 120 140 150
U-Value (W/m 2K) 0.52 0.35 0.30 0.26# 0.21# 0.18# 0.15# 0.13#
Weight kg/m2 10.9 11.5 11.9 12.3 13.1 13.9 14.6 15.0
Evolution Multi-groove
1,800mm to 17,000mm
1,800mm to 17,000mm
900m
m to
1000
mm
900m
m to
1000
mm
Insurer-approved and accredited Kingspan FIREsafe® PIR insulated panel system
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
10
Evolution Reveal
Evolution RevealEvolution Reveal allows for the creation of striking reveals through the installation of a standard panel. There are three reveal options to choose from: 50mm, 100mm and 150mm, creating a real contrast in depth. This system is completed using a steel omega section joint trim, which is available in complimentary or contrasting colours as the panel or in any other colour from the range.
Length 1.8 to 17m, bespoke cover widths 600mm to 1000mm - in 1mm (subject to MOQ) increments available 600/900/1000mm standard sizes.
Performance U Value
Core Thickness (mm) 45 60 70 80 100 120 140 150
U-Value (W/m 2K) 0.52 0.35 0.30 0.26# 0.21# 0.18# 0.15# 0.13#
Weight kg/m2 10.9 11.5 11.9 12.3 13.1 13.9 14.6 15.0
Insurer-approved and accredited Kingspan FIREsafe® PIR insulated panel system
1,800mm to 17,000mm
600m
m to
1000
mm
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Evolution Reveal Recess
Evolution Reveal RecessAs the name suggests, Evolution Reveal Recess is the combination of both Evolution Reveal and Evolution Recess. This is by far the most versatile product in the range, with a flexible reveal and a neat 3D recessed joint detail. Evolution Reveal Recess ranges in widths of 600mm, 900mm and 1000mm.
Length 1.8 to 8m, bespoke cover widths 600mm to 1000mm - in 1mm (subject to MOQ) increments available 600/900/1000mm standard sizes.
Performance U Value
Core Thickness (mm) 45 60 70 80 100 120 140 150
U-Value (W/m 2K) 0.52 0.35 0.30 0.26# 0.21# 0.18# 0.15# 0.13#
Weight kg/m2 10.9 11.5 11.9 12.3 13.1 13.9 14.6 15.0
Insurer-approved and accredited Kingspan FIREsafe® PIR insulated panel system
1,800mm to 8,000mm
600m
m to
1000
mm
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
12
The fire occurred in the external compound of a large Audi dealership - a deliberate act of arson. The car in the foreground is understood to be an Audi Q3 with other cars being of at least a similar make and model. At locations remote from the area of peak incident radiative heat flux, the charring of the PIR core was significantly reduced, demonstrating that combustion had not been propagated by the PIR core material.
The inside of the workshop showed no evidence of fire penetration in an area adjacent to the external fire attack.
For more details on our case studies go to www.kingspan.co.uk/panels-fire-safety
Real Fire Case Study Whilst large scale fire testing provides a very good indication of how systems react to fire, over the last 15 years we have collated a comprehensive collection of case study information based on major fires in a wide range of buildings that shows excellent fire performance of our panels in real fire situations. Case studies are independently investigated and have only been published where we have permission.
Real Fire Case Study — Audi Dealership
Fire Testing
Inside of workshop showed no evidence of fire penetration.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Fire Tested for High-rise & Occupied BuildingsThe system meets, or exceeds, all the statutory regulation criteria, such as structural, thermal, acoustic and durability performance, offers a sustainable rated solution and, most importantly of all, provides life and property fire safety protection. 150mm PIR ECOsafe® Evolution Access Panel has been tested to BS 8414-2 and meets the requirements of BR 135 for buildings with a storey above 18m.* Learn more about Kingspan’s commitment to fire safety www.kingspan.co.uk/firesafety
Fire Testing
Horizontal 150mm ECOsafe® PIR BENCHMARK Evolution Axis Panel has been tested to BS8414-2 and meets the requirements of BR 135 for facades with a storey above 18m.
* For alternative profiles and thicknesses we can work with your design team to prepare technical assessments performed by an independent fire specialist where a project requires alternative product combinations than those tested.
BENCHMARK Evolution ECOsafe® PIR 600 to 1000mm wide, 45 to 150mm thick. Vertical and horizontal laid.
Evolution ECOsafe® PIR 900 and 1000mm wide, 45 to 120mm thicknesses Evolution QuadCoreTM 900 and 1000mm wide, 45 to 150mm thicknesses.
Kingspan Certified Installation Partners
Kingspan Façade System Site Inspections
BS 8414-2 Tested SystemsEasy to install, minimum components
14
BENCHMARK Evolution
From concept to creationCompliance Assured is the verified chain of custody process to enable Kingspan’s “as tested” systems to become your “as constructed” building.
Want to know more? Contact our technical team 0800 970 9036
Robust independently verified “as tested” details
Prescriptive Procurement
BR 135 Classified Rainscreen Systems Kingspan Certified Installation Partners Robust Construction & Specification Details Single-source Components Kingspan Façade System Site Inspection Façade System Warranty Compliance Assured Certificate
16
System Performance
Panelised Façade Systems
AcousticEvolution façade panels have a minimum single weighted sound reduction index Rw of 25dB.
StructuralEvolution panels consist of two metal faces positioned on either side of a core that is a thermally insulating material, which is firmly bonded to both faces so that the three components act compositely when under load. The individual layers by themselves have limited flexural rigidity and cannot therefore bear loads but, by combining the two outer surface layers with the core, a shear rigid composite section is formed.
FireThe panelised façade systems are widely recognised by investors, property insurers, designers and constructors for their superior fire performance and reducing the fire risk. The systems are tested and approved to European and country specific standards, complying with all relevant Building Regulations.
Superior Airtightness and WeathertightnessOne of the biggest sources of building heat loss (or heat gain) is air leakage, i.e., ‘leaky buildings’.Evolution is rigorously tested to ensure airtightness and weathertighness over the lifecycle of the building.
ThermalEvolution insulation cores provide superior thermal performance with tested U-values. Most importantly, the insulation is on the exterior of the building structure to provide the best possible thermal envelope by reducing thermal bridging typical of cavity wall systems. In addition, the panels feature excellent insulation core-to-core contact, which provides an unbroken thermal shield against heat.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Testing & Accreditation
Designed and tested to provide total regulatory compliance.
Evolution is covered by our Total BENCHMARK Guarantee, and has been tested and complies with National Building Regulations and standards.
England Wales Scotland Northern Ireland
Republic of Ireland
Structural
Thermal & Airtightness
Water-Air & Vapour
Fire Safety
Accoustic
Fall Protection
Sustainability
Health & Wellbeing(QuadCore only)
Non-Regulatory
Durability Non-Regulatory
Warranties Non-Regulatory
18
Build Speed
Panelised Façade Systems
Step 1 Step 2 Step 3
Step 4
With support steel in place, panel installation can start at the corners, the most critical dimension. Steel framing tolerances necessary for architectural panel applications are considerably tighter than industrial applications.
Evolution Panelised Facade is a single component system that increase the speed of build, minimise delays reduce the need for multiple trades and promote earlier internal fit-out.
Panels are installed on multiple elevations, simultaneously, allowing interior trades to enter the building earlier in the job schedule.
The end result is an enclosed envelope, offering superior thermal and moisture protection, installed in less time than conventional multi-part built-up systems.
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Installation Time
Installation time over an area of 5,000m2
Multi-component vs Single-component
Compared to a multi-part, site assembled, cassette wall system, the Evolution panel as a single component allows for up to 50% faster installation time.
Evolution Panels are lightweight, easier to handle and can be installed in all weather conditions. The single component nature reduces the need for multiple trades on site and the associated workmanship quality issues. This allows the site installation of the wall system to be removed from the building programmes’ critical path.
Single-component 2.5 weeks
Multi-component 5 weeks
20
Curves & CornersCurved elevations and neatly formed secret-fix corners are easily achieved with the Evolution range. Panels can be curved vertically and horizontally to create large sweeping elevations or used for more understated corner sections. Panels can also be cranked and mitred to form internal or external corner units or to create depth to a boxed and recessed window detail.
Flashings & FabricationsWe can manufacture complementary flashing, gutters and accessories for all projects.
Panelised Façade Systems | Evolution Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Product Compatibility Chart
Customising Your Building Design Top HatsThe Evolution range has five joint options or Top Hats that can be used vertically or horizontally giving more design freedom. Evolution Axis and Multi-groove can be used with both System X and System Z top hats, Evolution Reveal can only be used with System Z top hats.
System X with aluminium top hat, no insert
System Z with steel top hat, recessed insert
System Z with steel top hat, flush insert
System X with aluminium top hat, rubber gasket
System X with aluminium top hat, recessed insert
Curved & Performed Corners Joint Options
Curved Panel & Corner
(Hz)
Curved Panel & Corner
(Vt)
Cranked / Mitred (Hz)
Cranked / Mitred (Vt)
Steel Omega Section Joint Trim
- with Flush or Recess Insert
(Vt)
Aluminium Raised Caps
(Vt & Hz)
Aluminium Omega Section Joint Trim with Flush or EPDM Gasket Insert
(Vt)
NEW Recessed
Aluminium
Recessed EPDM Black Gasket
- 10mm or 20mm (Vt)
BENCHMARK Evolution Axis • • • • • •
BENCHMARK Evolution Recess • • • •BENCHMARK Evolution Multi-groove
• • • •
BENCHMARK Evolution Reveal • •†† •†
BENCHMARK Evolution Reveal Recess
• •†† • •
†† Crank cannot be located along the reveal † Steel scallops required
22
Panelised Façade Systems | Evolution Textured
Evolution TexturedEvolution Textured is our Axis insulated panel with a factory applied render giving the appearance of a wet render but with build speed and benefit of an insulated panel. The controlled factory conditions ensure every panel is consistent in colour, texture and flatness. They are also less vulnerable to weather interruptions and associated variations in finish than traditional wet applied render - durability/weather testing to DIN 5021 and BS EN ISO 9227 salt spray, and DIN 52104 for Freeze/Thaw.
Internal and external pre-formed corners, curved panels and ancillaries can be rendered.
Available LengthsStandard lengths 1.8 to 8 metres. Panel lengths up to 16 metres are available. Panels less than 1.8m long can be supplied and are subject to an additional charge. These panels cannot be end lapped.
AcousticsPanels have a predicted single-figure weighted sound reduction Rw = 24db.
* panel weight only.
Technical Overview Dimensions
600-1000mm cover widths
Cor
e
thic
knes
s
Thermal Performance
Core Thickness (mm) 45 60 70 80 100 120 140 150
U-Value (W/m2K) 0.54 0.35 0.30 0.27# 0.21# 0.18# 0.15# 0.135#
Weight kg/m2* 13.5 14.1 14.5 14.9 15.7 16.5 17.3 17.7
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Evolution Textured ColoursEvolution Render offers the look and texture of an external wet render - factory applied to our premium insulated wall panel for speed, ease of install and superior performance.
Signal WhiteRAL 9003
PearlRAL 9010
Silver GreyRAL 7001
Merlin GreyRAL 180 40 05 BS 18B25
MustardRAL 1001
MagnoliaBS 08B15
AdventuraRAL 7000
MoonstoneRAL 7035
CreamRAL 1015 BS 10C31
Strawberry RedRAL 3018
Sky BlueRAL 5015
MushroomRAL 080 70 10 BS 10B19
Sunflower YellowBS 10E55
AutumnRAL 040 50 20
24
Inspiration
Evolution – Super-smooth unprofiled insulated panel
– Secret fix
– Can be laid vertically or horizontally
– Fastest construction method
– Factory made
– Cost effective
– Quick order turnaround
– Broad range of colours
Evolution
benchmarkbykingspan.com
Insp
iratio
n
ToyotaIreland
Product Recess Fix CassetteEvolution RevealEvolution Recess
Architect Node
26
Inspiration
St. Joseph’s College NudgeeProductEvolution
ElutecDagenham, UK
ProductEvolution AxisKarrierShingle —ArchitectLSI Architects
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Insp
iratio
n
Louis BlériotHigh SchoolFrance
Product Evolution Axis
Architect Philippe Chiossone
28
Inspiration
GaronorBusiness ParkAulnay sous Bois, France
ProductEvolution Axis —ArchitectAtelier 4+
Buhrer & WehlingGermany
ProductEvolution Karrier System Hook-On Cassette System —ArchitectBENCHMARK and Bührer & Wehling Projekt GmbH.
Lion Products BonheidenProductEvolution
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Insp
iratio
n
Product Evolution Axis
Architect AID Architects OostmalleLoda Office
Beerse, Belgium
30
Inspiration Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Insp
iratio
n
Product EvolutionAdolf Papeleupark
Gent, Belgium
32
Inspiration Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Insp
iratio
n
Product Evolution
Architect Magdalinos ArchitectsHastings District
Court HouseHastings, New Zealand
34
Inspiration
Steen Invest Leeuwarden Netherlands
ProductEvolution Axis —ArchitectArchitectenbureau Paul de Ruiter
TNT Green Office Hoofddorp Netherlands
ProductEvolution Axis —ArchitectArchitectenbureau Paul de Ruiter
Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
Insp
iratio
n
Product Evolution Axis
Architect Architectenbureau Paul de RuiterOranjewoud
Oosterhout Netherlands
BENCHMARK Evolution
benchmarkbykingspan.com | benchmarkbykingspan.ie
BENCHMARK by Kingspan Greenfield Business Park 2, Greenfield, Holywell, Flintshire, CH8 7GJ, UK. Tel: +44 (0) 1352 716100 info@benchmarkbykingspan.com www.benchmarkbykingspan.com Carrickmacross Road, Kingscourt, Co. Cavan, Ireland Tel: +353 (0) 42 969 8500 info@benchmarkbykingspan.com www.benchmarkbykingspan.ie Technical Services Tel: +44 (0) 800 970 9036 (UK) Tel: +353 (0) 42 969 8529 (Ireland) Email: technical@kingspanbenchmark.com Marketing Services (Samples & Literature) Tel: +44 (0) 1352 717251 (UK) Tel: +353 (0) 42 969 8540 (Ireland) Email: samples@kingspan.com Quotation Hotline Tel: +44 (0) 1352 716170 (UK) Tel: +353 (0) 42 969 8555 (Ireland) Email: enquiries@kingspanbenchmark.com Sales Tel: +44 (0) 1352 716100 (UK) Tel: +353 (0) 42 969 8500 (Ireland) Email: info@benchmarkbykingspan.com
Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof.
BENCHMARK by Kingspan
Greenfield Business Park 2, Greenfield, Holywell, Flintshire, CH8 7GJ, UK.Carrickmacross Road, Kingscourt, Co. Cavan, Ireland.
Tel: +44 (0) 1352 716100 info@benchmarkbykingspan.com www.benchmarkbykingspan.com www.benchmarkbykingspan.ieTel: +353 (0) 42 969 8500 BENCHMARK Evolution
02/2018 v1