Post on 19-Jan-2017
transcript
The Tools Adviser
BEST PLATE JOINER
A Plate Joiner is a wooden tool with two pieces of wood is used to join together. Joiner is a wafer using a small circular saw wood or wood composite panels opposite ends of a crescent-shaped hole cut in two pieces. Oval, very dry and compressed wood wafer is covered with glue, or glue is applied in the slot. Cookies are immediately placed in the slot, and the two boards are clamped together. Wet adhesive wafer expands, further improvement bonds.
TruePower 01-0102 Biscuit Plate Joiner with Carbide Tipped Blade, 4"
• 1010 Watts, 11000 RPM, 120v/60hz AC• Max cutting depth: 0.55", Cutting Angle: 0 - 45 degree• Biscuit Spec: #0, #10, #20• Including one 4" 6T C2 tungsten carbide tipped blade• One year limited warranty
DEWALT DW682K 6.5 Amp Plate Joiner• Retractable anti-slip pins• Six tooth carbide blade, dust bag and heavy
duty case included• 6.5 Amp, 10,000 rpm motor provides power
for working in the hardest woods• Dual rack and pinion fence ensure blade
and fence are always parallel for accurate joints every time
• Integral one-piece fence is adjustable and tilts 0-90 degrees
• Flush cuts can be made at 0 degrees without removing fence
• 45 degree locating notch in fence allows indexing off the outside surface of a mitered joint; non-marring, heavy-duty aluminum shoe allows joiner to be clamped for stationary work
PORTER-CABLE 557 7 Amp Plate Joiner Kit
Plate joiner kit handles a variety of wood and offers seven different cutting settings
Industry-leading, super powerful 7-amp motor rotates blade at 10,000 RPM
Fence tilts from 0 degrees to 135 degrees with positive adjustable stop at 90 degrees
Four-inch blade makes standard-size cuts
Comes with 4-inch blade, centering plate, spanner wrench, dust bag, and chip deflector
• Unique, patented cutting action that rotates and oscillates to create perfect, clean, and repeatable mortises every time.
• Mortise width adjustment with the turn of a dial allows for easier alignment when joining panels.
• Pivoting Fence allows you to create angled mortises from 0-90° with positive stops at 22.5°, 45°, 67.5°.
• Indexing pins for quick alignment against the edge of the workpiece for accurate placement.• Dust extractable design provides clean mortise holes for better glue adhesion and longer
cutter life.
Festool 574432 Domino Joiner DF 500 Q Set
Makita 3901 5.6 amp Plate Joiner
Powerful 5.6 amp motor provides 10,000 rpm
Six depth settings for no. 0, no. 10, and no. 20
biscuits
Precise rack-and-pinion vertical fence adjustment
Large top-grip handle for comfort and control
One-year warranty
Lamello Classic X 101600 Biscuit
Joiner
New base plate swiveling front stop and stop square are flush on sides for easy position on
edge for reference
New powerful, ergonomically designed 780 watt motor
CNC high precision machined parts and long life guidance
system render accurate parallel grooves for perfect alignment
http://www.thetoolsadviser.com/best-plate-joiner-ultimate-buyer-guide//