Post on 02-Jul-2015
description
transcript
© 2014 IBM Corporation
How to Connect Intel Galileo to IBM Bluemix IOT
Joseph Chang
Senior IT Specialist
IBM Software Group
Document number
© 2014 IBM Corporation2
Hardware Requirements
Intel Galileo
Source: If applicable, describe source origin
Micro SD Card (4G above) USB Cable
RJ45 Ethernet Cable
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Software Requirements
3
• Arduino Software 1.5.3• SD-Card Linux Image
Please download the tool from:https://communities.intel.com/docs/DOC-22226
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Connect the cable and install the driver
4
Connect the PC with Galileo with USB cable.Install the driver. Then launch the device manager in the Windows. You should be able to find the Galileo in the serial Port.
Take note for the port number.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Bluemix IOT Recipe – Intel Galileo
5
Follow the instruction in the following URL to configure Bluemix iot demohttps://developer.ibm.com/iot/recipes/intel-galileo/
Download ibm-iot-quickstart.zip
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Connect to Galileo with Arduno
Launch arduino from you desktop.
Copy the sketch/print_ipaddr/print_ipaddr.ino from ibm-iot-quickstart.zip
6
• Run the script to get Ethernet address.
Take note for the Ethernet address.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Bluemix IOT Recipe – Intel Galileo
7
Bluemix supports following IOT Devices
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Bluemix IOT Recipe – Intel Galileo
8
Follow the instruction in the following URL to configure Bluemix iot demohttps://developer.ibm.com/iot/recipes/intel-galileo/
Key Steps:a)Download ibm-iot-quickstart.zipb)copy the file to the Galieo linux env. ps. There is tftp and unzip in the linux.c) Unzip the ibm-iot-quickstart.zip and execute setup.d)Launch sample with the command: node ibm-iot-quickstart.js
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Launch the demo
9
Use putty ssh to connect to Galileo.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Connect to Quick Start
10
http://quickstart.internetofthings.ibmcloud.com/If you successfully configure the quickstart sample, you will see the following screen.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Connect to Quick Start
11
If you successfully configure the quickstart sample, you will see the following screen.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Create IOT application with Node-Red
12
Goto Bluemix catalog. Create a IOT server.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Launch Node-Red
13
Connect to the IOT server you created. Then click Node-RED flow editor Ex. http://jziot.mybluemix.net/
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Create IOT application with Node-Red
14
Import the sample json file. Modify the topic of IOT Appin
The topic is : iot-2/type/iotsample-galileo/id/984fee018b9e/evt/status/fmt/json
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Tweet message
15
https://ibm.biz/BdEzTj
© 2014 IBM Corporation
Store message in Cloudant DB
16
* The temperature DB need to be created by yourself in Cloudant.
https://ibm.biz/BdEzTj
© 2014 IBM Corporation17