Post on 29-Nov-2014
description
transcript
MK
U@
20
09
Ver
. 4.1
the protection
edge...
Body Armour
Body Armour
MKU Worldwide
Germany+49 4282 508100
UK+44 7920 599019
Europe
USA+1 623 8066380
Americas
UAE+971 48810012
MENA
Singapore+65 82281998
Asia Pacific
New Delhi+91 11 46543512
India
www.mku.com
MKU Pvt. Ltd.Corporate Office103, Chandralok Complex, 26/72-D, Birhana Road, Kanpur - 208001, UP., INDIAPh.: +91 512 2363491 • Fax: +91 512 2354644 • protection@mku.com
Kanpur+91 512 2363491
Gain the edge…
Our brave soldiers constantly live on the edge. Fighting wars against terror…, in extreme conditions, against unknown enemies… constantly conquering their inner fears to discharge their duties because nothing is more important to them than their commitment to their nation.
Inspired by the sheer courage of these brave men, MKU firmly believes that the edge is not the end, rather a state of the mind; victory often lies just beyond the edge
MKU consistently treads beyond this edge… to seek innovation, to harness the potential of the latest technology so that it can develop solutions which deliver the most advanced equipment and protection to these soldiers to enable them to perform their missions fearlessly, effectively and precisely.
The protection edge…. from MKU
Protecting those who protect us ….
MKU has an experience of over 25 years in servicing the requirements of defence and paramilitary forces across the world. It services its customers in over 50 countries (including all NATO countries) through a portfolio of over 30 products in more than 10 categories. Through concentrated efforts, MKU has gained diverse domain expertise in products and solutions for the armed forces that have allowed the soldiers to perform more efficiently and effectively while staying protected.
MKU is the largest manufacturer and exporter of armoured solutions in Asia and one of the leading suppliers of personal protection solutions to the Indian MKU has extensive knowledge of defense sector Defence, Paramilitary and Homeland Security Forces. operations across varied geographic locations. Over the
years veterans from the defense sector have joined MKU with experience and insight of the industry which has helped MKU immensely to harness a sizeable market share by shaping and designing products which meet end user expectations and requirements.
MKU products have been tested and certified by the Additionally, MKU has on board technocrats from the best labs in the world including HP White Labs (USA), field of composites, experts in production technologies, TNO (The Netherlands), Terminal Ballistics Research solution integrators, product designers and market Laboratory, DRDO (India), Mellrichstadt Ballistic researchers who focus on evolving future product Laboratory (Germany) and Banc Officiel (France). offerings and delivering accurate and efficient
solutions.
Asia's largest armoured solutions manufacturer
Experience and expertise….. exceeding customer expectations
Certified solutions…. meeting the highest standards
Threat level Ammunition Bullet Weight(g)
Bullet Velocity
I
IIA
II
IIIA
.22 Calliber LR LRN
.380 ACP FMJ RN
9 mm FMJ RN40 S&W FMJ
9 mm FMJ RN357 Mag JSP
44mm44mm
44mm44mm
44mm44mm
44mm
44mm
2.6g /40gr.6.2g / 95gr.
8.0g / 124gr.11.7g / 124gr.
8.0g / 124gr.10.2g / 58gr.
329 m/s.322 m/s.
341 m/s.322 m/s.
367 m/s.436 m/s.
9 mm FMJ RN44 Mag SJHP
44mm44mm
8.0g / 124gr.15.6g / 240gr.
436 m/s.436 m/s.
847 m/s.
878 m/s.
7.62 mm NATO FMJ
.30 Caliber M2 AP
9.6g / 148gr.
10.8g / 166gr.
III
IV
BFS Deformation
PSDB Ballistic Body Armor
Standard (2003)
German Schutzklassen (October-2000) Protective Vests
PN - V - 87000 (1999)
(Polish standard)
European, prEn ISO 14876-2
Chinese Russian - GOST R-50744-95
Some of the other standards followed and adhered to by MKU are:
NIJ Standard - 0101.04
Due to the vast numbers of bullets and calibres existing today, and more being developed constantly, the number of conceivable threats is quite endless.
Although offering absolute protection against every developed & conceivable threat is a landmark that MKU aspires to achieve, its various personal protection products currently adhere, follow and conform to a variety of well defined international threat levels. Since the threats vary significantly with geographic locations, these threat levels show country wise modifications.
MKU constantly keeps itself aware of all major new ammunitions being developed and also of all minor/major modifications or upgrades to these International Threat Levels which are followed by a wide gamut of countries.
International threat levels
Infrastructure that invokes trust…. Customised solutions….
Quality that assures peace of mind
Innovative solutions…. through research and development
MKU has the infrastructure that allows it to deliver MKU works closely with its clients to understand their superior products within strict timelines. Its protection requirements and environments. Its manufacturing capacities span across 3 units located in immense experience in the global markets and its India and 1 in Germany. Units 1 & 2 are located at expertise with nearly all types of ballistic raw materials Malwan & Rooma near Kanpur while Unit 3 is located enables MKU to offer customized solutions which are at Dehradun. Unit 4 is located at Sittensen in Germany. accurate and apt.
2Together, these units cover approx. 18,500 m (2,00,000 sq. ft.) in area and house state of the art machinery and equipment. The Kanpur unit has a fully equipped design house while the German unit has a At MKU, we understand that the safety of soldiers complete ballistic testing facility. cannot be compromised at any cost. We measure
quality on the basis of performance, safety, reliability, comfort & cost effectiveness. MKU believes in delivering products of the highest standards to its customers. Stringent checks are carried out by our in-house quality control personnel at every stage from The research and development team at our design design to production and integration to eradicate any centre and ballistic lab constantly work towards pitfalls, be it in regards to quality or costly delays. developing newer products and technology to
enhance the performance of our products and stay abreast with the latest threats that are evolving. MKU maintains a constant dialogue and shares knowledge with leading ballistic raw material manufacturers, which complements our ability to innovate in design and development.
INSTAVEST, from MKU, is a revolutionary ballistic jacket which incorporates an advanced 4P Quick Release System. A soldier can divest the vest in a single pull action in less than a second.
Its remarkable design makes it the simplest quick release ballistic over-vest which can be recouped and reassembled in less than 30 seconds . The Quick Release System uses no cables or wires and is ambidextrous in nature.
Design Features Optional? ?
?
??
Protection?
??
?
? ?
Protection Areas?
?
? Sizes??
? Accessories? ?
?
?
Colors?
Donning and doffing in an instant for quick reponse. Detachable collar and shoulderIt divests in less than a second and can be re- Detachable groin protectorassembled and donned in approx. 30 seconds
Upper arm protectorLight weight, flexible and extremely comfortable
Advanced load distribution system
Up to NIJ Level III AAmbidextrous in nature - can be used by both left & right handers with equal ease Upgradeable to Level III & Level IV Fully adjustable at waist & shoulder for a precise Anti - stab Armour Plates and comfortable fit
Incorporates a rifle butt rest for enhanced comfort during operations Front, back and side
Compatible with hydration packs, ammunition pouches & other gears
Small, Medium, Large & X-LargeRear drag strap handle
D-rings to carry bulky items
Manufactured using breathable, fire retardant, Carry Bagwater repellant advanced fabrics
Utility pouchesInner lining for air ventilation
Clo value (for comfort) complies to BS EN ISO 105831:2004
Patent filed
(also available in Camouflage Patterns)[Olive Green|Sand|Black| ]Navy Blue
the most advanced armour vest in the world
I N S T A N T R E L E A S E A R M O U R V E S T
Design Features Optional? ?
?
Protection Level? ?
? ?
??
? Protection Areas?
Accessories!
Colors:
? Side plates
Five Armour Plates to protect neck, front, back and groin
Abrasion resistant high performance fabric Provides Level III protection
Adjustable at sides & shoulders Upgradeable to level III+
Soft Armor (SAP) Plates provide Level III A Removable soft Armour Plates offering protection against handguns are sealed in waterproof bags protection
? Detachable groin & neck attachments
Front, back, neck and groin
Carry Bag
Full body protection against rifle ammunition
It has been observed across the world that Police and Army men engaged in operations get several injuries on vital parts of the body from rifle fire, especially at the groin & neck regions. COMPLETAR, from MKU, is designed to provide complete protection to a soldier's body. Its unique design provides protection against handgun ammunition in the torso region and protection against rifle fire to the vital organs of the body including the neck and groin regions.
COMPLETAR consists of curved Armour Plates for groin and front torso, a flat rectangular insert for the back torso & three dimensional inserts for the neck & collar, which do not restrict body movement and are easily detachable.
CO MP LET E BO DY P ROT EC T IO N
(also available in Camouflage Patterns)[Olive Green|Black|U N Blue ]
ERGO, from MKU, provides full body protection while allowing unrestricted movement to the modern soldier. It consists of ergonomically designed full body protective plates which protect the complete torso from rifle ammunition (NIJ Level III & Level III+). The ERGO system is designed to compliment MOLLE which helps a soldier to add on various equipment as and when required.
Design Features Optional? ?
? Protection Level ?
??
? Accessories?
?? ?
? ?
Colors?
?
?
?
?
?
Tactical Vest Detachable collar, groin and sleeves
Side opening pockets fitted with zippers for convenient insertion of Armour Plates
NIJ Level IIIErgonomically designed Armour Plates allow Upgradeable to Level III+ (AK-47 MSC)excellent movement
One sided shoulder opening
Rifle butt rest at shoulder Utility pouches Compatibility with hydration pack Carry bagEquipped with MOLLE system for attaching Hydration carriervarious combat equipment
Can be upgraded to Level III+ (AK-47 MSC)
Inner mesh lining for body heat dissipation
Abrasion resistant high performance outer fabric
Waist belt for even distribution of weight of vest on body parts
Side closure buckle for double locking
Rear drag strap handle
(also available in Camouflage Patterns)[Olive Green|Sand|Black| ]U N Blue
E X T R A P R O T E C T I O N
JMU IIA JMU XIVA
Protection Area: Protection Area: ? ?
Design Features:Design Features:?
??
??
?
?
??
??
??
?Optional :
Sizes Available:?
Sizes Available:Protection Level:
!
?Protection Level
??
Accessories:?
?Accessories:
??
?
Front, back and sides Front, back, sides, collar, shoulder, upper arm and groin
Front opening enables quick doffing and donningErgonomic designErgonomic design to suit various applications Inner waist belt for balanced weight distributionCapable of accommodating various multi-utility
pouches Front & rear pockets for upgradation of protection levels with Armour PlatesAdjustable load distribution systemComprehensive coverage area including upper Front & rear pockets for upgradation of jackets armwith Armour PlatesEnhanced protection at sides and under armsBuilt-in pull tabsM.O.L.L.E. compatibleM.O.L.L.E. compatibleDetachable collar, groin, upper arm & neck
Detachable collar, groin, upper arm & neck?Small, Medium, Large & X-Large
Small, Medium, Large & X-LargeNIJ Level III A
Upgradeable to level III and IV with Armour Plates NIJ Level III A
Upgradeable to level III and IV with Armour Plates Carry bag
Utility pouchesCarry bag
Utility pouches Colors:
Colors:
Multi-utility over-vests are specifically developed for the Special Forces to provide optimal ballistic protection to combat terrorist activities. They provide high flexibility during defensive reflexes and integrate excellent protection with a lot of load bearing capability. They come with exchangeable pockets and holders, which are designed for carrying specialist equipment required by the Special Forces.
Multi-Utility Over-Vests
JMU X A
Design Features?
?
?
? Optional ?
??
?
Accessories?
?
??
? Protection Area??
?
MOLLE compatible system
Front, back and overlapping side protection with secondary velcro attachment system
Adjustable side and shoulder
Waist belt for optimal distribution of weight
Removable two piece collar design Detachable upper arm protection.
Specially contoured throat protector provides Batch identification attachmentimproved fit
Removable groin protection can be folded inside when not in use Carry bag
Utility pouchesSide closure plate pocket to fit 6” X 8” plates
Ambidextrous butt retention system
Front, Back, Side, Shoulder, Groin, Collar &Throat Rear drag handle.
Front and back pockets for Armour Plates Colors
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
Tactical Police over-vests have been designed by MKU with the aim to provide maximum maneuverability and comfort during tactical missions.
Manufactured using high quality materials, either alone or in combination, they are capable of offering protection of up to NIJ Level III-A.
Enhanced protection from ammunitions like AK-47, 7.62, SLR, 5.56mm. etc. can also be achieved by upgrading these over-vests with specific Armour Plates available separately.
Tactical Police Over-vests
JPT I A JPT II A
Protection Areas Protection Area? ?
Design Features Design Features! ?
! ?
!
?
!
?
!
?
! ?
?
!
! Optional!
?
Protection LevelProtection Level????
SizesSizes??
AccessoriesAccessories??
Front and back Front, back and sides
Ergonomically designed to provide maximum flexibility and movement
Reinforced pockets for Armour Plates
Reinforced stitched ends for better durability of the over-vest
Ballistic inserts sealed in water proof & UV resistant fabrics to assure safety in adverse conditions
Water repellant, removable and washable outer carriers for enhanced durability and performance of over-vests Full wrap-around torso coverage
Shoulder straps supported by additional back-up Adjustable side closures for a comfortable fitstraps for better positioning of vests
Concealed pockets for Armour Plates
8 cm wide waist belt for better grip and comfort
Easy ballistic panel access through zippered Detachable collar, groin exteriors
NIJ Level III ANIJ Level III AUpgradeable to level III and IV with Armor Plates Upgradeable to level III and IV with Armour Plates
Small, Medium, Large & X-LargeSmall, Medium, Large & X-Large
Carry bagCarry bag
ColorsColors
Ergonomic design optimizes flexibility and movement
Improved stability through reinforced stitched ends
Equipped with ballistic inserts sealed in water proof & UV resistant fabrics for endurance in adverse conditions
Outer carriers are removable , washable and water repellant to enhance durability and performance
Provision for Armour Plates through reinforced pockets
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
Ideal for tactical operations, Tactical Military Over-vests from MKU are manufactured using Polyethylene/ Aramid or hybrid materials. External fabric is optimized for camouflage. Designed for easy mobility while providing optimum protection and maximum comfort over prolonged usage, they are capable of offering protection of up to NIJ Level III-A.
Enhanced protection against ammunition like AK-47, 7.62 NATO, 5.56 mm. etc. can also be achieved by upgrading these over-vests with Armour Plates available separately.
Tactical Military Over-vests
JMT IV B JMT X A
Protection Area Protection Area? ?
Design Features Design Features? ?
? ?
?
??
??
??
?
? ?
? ?
? ?
?
Protection LevelOptional
???
Protection LevelAccessories???
Sizes AvailableAccessories
??
Sizes Available?
Front, back, sides, collar & groin Front, back, sides, collar, groin and shoulders
Ergonomic construction and design for maximum Ergonomically designed to enhance protection, protection, flexibility and movement flexibility and movement
2 front & side utility pouches Provision for Armour Plates through reinforced front & back pocketsReinforced front & back pockets for Armour PlatesUn-hindered movement of limbsWater proof & UV resistant ballistic panel coversUV resistant & water proof panel coversAdjustable shoulders Water repellant outer coverWater repellant, removable and washable outer
carrier Removable and washable outer cover
Detachable & foldable groin guard Pull out groin guardoAdjustable collars for neck protection Round neck collar for 360 protection
Inner waist belt for even weight distribution on Adjustable shouldersbody parts Overlapping shoulder panels for protection from
overhead attacks
NIJ Level III AUpper arm protection Upgradeable to level III and IV with Armour Plates
NIJ Level III ACarry bagUpgradeable to level III and IV with Armour Plates
Small, Medium, Large & X-LargeCarry bag
Small, Medium, Large & X-Large
Colors
Colors(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
These over-vests are designed for specific duties of a police officer. They combine mobility and protection and at the same time are very easy to put on or take off. They are especially useful for personnel assigned to stake-out or for surveillance arrest teams that need to quickly put on a vest.
Manufactured using Polyethylene and Aramid materials, either alone or in combination, they are capable of offering enhanced protection of up to NIJ Level III-A.
JFO II A JFO VIII A
Protection Area Protection Area? ?
Design Features Design Features? ?
?
??
??
?
?
??
Protection LevelOptional
?
??
Sizes? Protection LevelAccessories ?
? ?
Sizes?
Accessories?
Front, back and sides Front, back, sides, collar and shoulders
Front opening - Ideal for hot & humid climates Ideal for hot & humid climates as it is front openingFull width and high upper protection at the backThe back of the over-vest provides full width and Overlapping lapels below the opening provide high upper protectionenhanced frontal protection. Added protection at the front with overlapping Front utility pocketspanels below the openingConcealed pockets for Armour Plates to upgrade Additional protection at the collars and shoulderprotection when requiredExtra-wide double velcro straps in the front for Easy donning & doffingsecure protection
NIJ Level III ACan be upgraded for added protection through Upgradeable to level III and IV with Armor Plates Armour Plates using the special MKU up-armour harness systems
Small, Medium, Large & X-Large
NIJ Level III A
Carry bag Upgradeable to level III and IV with Armour Plates
Small, Medium, Large & X-Large
Carry bag
Colors
Colors
Front Opening Over-vests
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
(also available in Camouflage Patterns)[Olive Green|Olive Drab|Sand|Black|U N Blue ]|Navy Blue
Personal Vests
Persona JCO-II A
Protection Area Protection Area? ?
Design Features Design Features? ?
?
??
??
?
? Optional?
?
?OptionalProtection Level
??
Protection LevelSizes Available
??
Sizes Available?
Front, back and sides Front, back and sides
Made of high quality cotton and viscose fabric Unobtrusive/ concealable protection that ensures peace of mindAdjustable back closing design Removable and washable exterior coverFront to back wrap around ballistic protection Water resistant carrier which helps in retaining Fixed ballistic shoulders the durability and performance of the vest for a Removable ballistic panels sealed in waterproof longer durationbags
Ergonomic design
Non-detectable design Stab resistant Armour Plates
Stab resistant Armour PlatesLevel III A
Level III A Small, Medium, Large & X-Large
Small, Medium, Large & X-LargeColors
Colors
Floatation over-vests from MKU, have been developed specially for the Navy, Coast Guard and other Marine Law Enforcement Agencies. They provide ballistic protection of upto NIJ Level III A while maintaining buoyancy and all other desired characteristics of a floatation vest. Use of advanced technologies, processes and materials ensure that these over-vests can survive the most intensive marine environments.
JFL I A JFL I B
Protection Area Protection Area? ?
Design Features Design Features? ?
?? ?? ?
??
? ?? ??
? ?
?
?
Sizes Available Sizes Available? ?
Front and back Front and back
Water resistant, buoyant ballistic material for Adjustable for comfort at shoulder and waistdependable protection Quick water drainagePuncture resistant Water resistant, buoyant ballistic materialAdjustable at shoulder and waist for added Puncture resistantcomfort Provision for Armour Plates upgrade through Extra outer belt to ensure a better fit reinforced pockets Man overboard drag loop for injured personnel Buoyancy level of 15 kg. at dead loadQuick drainage of water Tactical vest with buoyancy characteristic of a Reinforced pocket for upgrade Armour Plates. Floatation vestBuoyancy level of 15 kg. at dead load Full wrap around nylon webbing belt to prevent Buoyant collars for head support for an the vest from riding up while in waterunconscious person Ideal for coast guards and harbor patrol
Small, Medium, Large & X-Large Small, Medium, Large & X-Large
Colors Colors
Floatation Over-vests
Unobtrusive personal protection
(also available in Camouflage Patterns)[Black |Blue]|Grey
(also available in Camouflage Patterns)[Black|Blue ]|White
(also available in Camouflage Patterns)[Black ]|Navy Blue
(also available in Camouflage Patterns)[Black|Blue ]|Orange
Armour PlatesAt times, when threat levels change from handguns to heavier types of ammunition such as rifle bullets and armor piercing ammunition or even stabs, ballistic jackets and vests need to be up armoured with suitable lightweight protection to provide optimum protection.
MKU is amongst the few companies in the world which possesses the in-house ability and expertise to deliver superior, cost-effective protection solutions. It offers protection solutions against all the latest threats and newer types of ammunition that keep getting developed in the world.
Armour Plates from MKU are tested and certified by some of the best laboratories and test centres in the world like HP White Labs (USA), TNO (Netherlands), Terminal Ballistics Research Laboratory, DRDO (India), Mellrichstadt Ballistic Laboratory (Germany) and Banc Officiel (France).
All vest dependant plates provide the specified protection in conjunction with Level IIIA vestThe above specifications are for a standard 25 cm x 30 cm (±3 mm) Armour Plate in single curve geometryTolerance : Weight ±50 g , Thickness ±2 mm
Quick Reference Guide
Vest Dependant
Polyshield
Type Model No.
P 1001 L
P 1001
P 1002
Polyshield+
P 1101 L
P 1101
P 1102
Cerazone
C-3001
C 4002
C 4007
C 4501
C 5001
C 5002
C 5007
C 6006
Cerazone+
C 7002
C 7101
C 7201
Stand Alone
Polyshield
Type Model No.
P 1003
Polyshield+ P 1103
Cerazone
C 3004
C 4003
C 4502
C 5003
Cerazone+
C 7051
C 7151
C 7251
Polyshield Cerazone
Polyshield Cerazone
Best protection at the lowest possible MKU offers highly cost-effective ballistic weights can be achieved with the protection through its range of Cerazone Polyethylene Armour Plates manufactured Armour Plates which can be used either by MKU. Polyshield plates offer excellent with vests or as stand-alone plates. multi-hit capabilities and offer protection Cerazone range uses aluminimum oxide from secondary fragments. They do not on the strike face and various other crack and are resistant to UV radiations. composites as backing material, they are Water, sunlight, temperature changes, available in various configurations, and acids and oils have no effect on them. offer excellent protection.
Polyshield+ Armour Plates from MKU are Made using highly weight efficient manufactured using the most advanced ceramics like Silicon Carbide & Boron materials and special techniques. These Carbide (the third hardest material plates offer better trauma absorption and known to man after diamond and cubic are lighter than regular Polyshield plates by boron nitride) strike faces, Cerazone+ upto 10% for equal protection levels. They Armour Plates offer maximum are resistant to UV radiations, water, protection at the lightest weights. They sunlight & temperature changes are ideal for all weight critical
applications.
CerazoneCerazone Polyshield Polyshield
Bullet
Bullet
Features and specifications mentioned in the catalogue are subject to change without prior notice.Instavest, its name and logo is a registered trademark of MKU. Patent Filed.
.30 cal
.30 cal
AK-47 MSC AK-47 AP
AK-47 MSC AK-47 AP