Post on 17-Apr-2020
transcript
Guarantee :Boral Plasterboard warrants goods manufactured and supplied by it to be of consistent quality and free from any defects. Any goods found to be defective will be replaced without charge.
The liability of Boral Plasterboard under this warranty is limited to (at the sole discretion of Boral Plasterboard) the replacement of goods or the supply of equivalent goods.
Boral Connecting Clip
Boral Soffit Bracket
Boral J-Channel
Boral Metal Angle
20mm x 37mm x 20mm @ 1220mm
Boral Universal Furring Channel
10mm Boral Unispan Plasterboard
610mm
1200mm
Recessed Edge
Square Edge
Yes
Yes
1220
2440
10mm = 7.0kg/m²
BS 1230 part 1, ASTM C-1396/C 1396M-09a
BS 476 part 4 / part 6 / part 7, ASTM C473
BORAL UnispanBORAL Unispan is a lightweight 10mm thickness resilient plasterboard. It is speciallyformulated as a Ceiling Lining for Framing Spacing at up to 610mm centers*. BORALUnispan has a superior anti-sag performance and is faster and easier to install due tothe fact that it is approximately 12% lighter than 12mm plasterboard and lessfasteners are required.
Product Data
The above lengths are standard sizes, Boral Plasterboard is able to produce any required sheet lengthdepending upon the order size.
How to specify this product:Supply and install BORAL Unispan 10mm as shown on the relevant drawings.BORAL Unispan must be installed and finished in accordance to manufacturer’sspecification.
For more information, please contact our technical service.
BORAL Unispan Commercial/Residential Ceiling System
Edge Details:
Width (mm):
Length (mm):
Weight:
Product Standard:
Product Testing:
Metric (mm) 10mmThickness
•
NOTE: Not recommended for external use.
8 Mercury AvenueBarangay Bagumbayan,
Quezon City 1110,Philippines
Tel: (632) 911 6709Fax: (632) 911 6709 ext. *98
Manila Office:(Servicing Luzon Area)
Unit 6,G/F Century Plaza Complex,
Juana Osmeña St.,Cebu City
Tel: (6332) 254 2772
www.usgboral.com
Boral Plasterboard
Philippines, Inc.
Cebu Office:(Servicing Visayas and Mindanao Areas)