Post on 30-Jun-2020
transcript
BRAKE FLUID DOT 4 Synthetic Fluid for Brake Systems
Energizing performance. Every day LUBRICANTS
TOTAL OIL AUSTRALIA PTY LTD415 Riversdale Road, Hawthorn East, VIC 3123, Australia
Telephone (International):+61 3 9861 8600
Telephone (AU Free Call):1800 TOTAL OIL – 1800 868 256
HIGH TEMPERATURE PERFORMANCE High temperature resistance provides superior boiling point and high vapour lock temperature.
LOW MOISTURE ABSORPTIONAssists in maintaining high temperature performance throughout its service life.
ANTI-CORROSIONProvides corrosion protection for metals used in braking systems including cast iron, aluminium, steel, copper, brass etc.
ELASTOMER COMPATIBILITYCompatible with rubber seals and hoses.
FLUID COMPATIBILITYCompatible and miscible with other DOT 4 brake fluids.
APPEARANCE Transparent straw to amber fluid
EQUILIBRIUM REFLUX BOILING POINT (ERBP)
260°C min
WET ERBP 155°C min
KINEMATIC VISCOSITY AT 40°C 1800 cSt max
KINEMATIC VISCOSITY AT 100°C 1.5 cSt min
DENSITY AT 20°C 1.061 - 1.081 g/cm3
WATER CONTENT 0.2% w/w
Available in500ml, 5L & 20L
INTERNATIONAL STANDARDSAustralian Standard AS 1960.1
FMVSS 116 DOT 4
SAE J 1704
ISO 4925 Class 4
HN 1796
TOTAL BRAKE FLUID DOT 4 is a high performance polyglycol synthetic brake fluid conforming to DOT 4 requirements.
TOTAL BRAKE FLUID DOT 4 has high temperature resistance and low moisture absorption providing superior boiling point and high vapour lock temperature throughout its service life.
TOTAL BRAKE FLUID DOT 4 is recommended for brake and clutch systems in all vehicles where a DOT 4 fluid is recommended.
TOTAL BRAKE FLUID DOT 4 is not miscible with mineral based fluids (LHM) or silicon based fluids and should not be used where these fluids are specified.
DOT 4
LUBRICANTS
BRAKE FLUID
© 2
016
-06 T
OTA
L O
il A
ust
ralia
15 1
49 5
01
922. A
ll rig
hts
rese
rved
. N
on c
ontr
actu
al d
ocum
ent.
Cre
dits
: Shutt
ers
tock
www.totaloil.com.au