Post on 16-Feb-2017
transcript
Construction Chemicals
A Quality Product From
www.cetconindia.com
We
our products to X Brand but
never compare
Our products are
better than X Brand
customers say
CETCRETE AR 317/Latex 1317
Advantages:
Area of Application:
Coverage :
Packing:
CETCRETE SBR 417
Advantages:
Area of Application:
Packing:
Acrylic 317 & Latex 1317 based polymer liquid for waterproofing coating.
Ÿ
Ÿ
Waterproofing water retaining structures, Terraces, Roofs, Basement, Swimming Pools, Bathrooms & Sunken portions of toilet blocks.
, after 6 to 8 hours apply 2nd coat in other direction.
500 g, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg & 225 kg
Styrene butadiene rubber based multipurpose adhesive
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ Concrete repair : Spelled concrete, repairing floors & pre-cast slabs.
Ÿ Floor Screeds & Toppings : Abrasion resistant & non -dusting floors, underlay for special finishes.
Ÿ Waterproofing: Basement, Water towers, Tanks, Swimming Pools, Bedding tiles fixing or re-fxing slip bricks. Bonding new concrete to old.
500 g, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg & 225 kg
Water absorption is reduced, thus providing waterproofing properties.
The water retention value of the mortar is improved this involving less risk of drying out, shrinkage crack etc.
2 sqm per kg in two coats with 1: 2 part cement applying 1st coat like a paint
Excellent bonding old to new concrete.
Improved tensile & flexural strength,
High resistance to water penetration.
Increases durability and toughness.
Waterproofing Divisionwww.cetcrete.com
CETCON 2K 517
Advantages:
Area of Application:
Coverage :
Packing:
Direction for use:
Two component acrylic polymer modified elastomeric cementitious waterproofing coating.
Provides a seamless waterproof coating suitable for Roof, Terraces, Basement & Swimming Pools.
30 kg combo pack (Powder 20 kg bag + Polymer 10 kg container)
Ÿ Remove all dirt and loose particles from the surface by wire brush, and damp the surface before coating apply primer coat 1 Part of CETCRETE AR and 3 part water use as primer coat on wet surface.
Ÿ Mix CETCON 2K Powder & CETCON 2K liquid, Ÿ Applying 1st coat like a paint, after 6 to 8 hours apply 2nd
coat in other direction
Ÿ Elastomeric with thermal expansion similar to concrete.
Ÿ Excellent bond to concrete and masonry.
Ÿ Weather resistance, prevents concrete from corrosion by atmosphere.
Ÿ Excellent for leaking bricks & masonry walls, damp proofing of basements. Provides a durability coating.
Ÿ Non toxic, Ideal for potable water tanks.
18 to 20 sqm in two coats in 30 kg combo pack
Highest Elongation
& coverage in
2K cementitious
system in India
Adhesive Divisionwww.cetfix.com
CETFIX is polymer modified cement based powder needs to be mixed with water for installation tiles over tile or smooth surface without removing old tiles or hacking the surface.Advantages:
Excellent waterproofing characteristics.Ready to use just add water, No curing required after application.Soaking of tiles not required & Reduces labour cost.Excellent adhesion, low shrinkage.
Packing: 20 kg Moisture proof bag
CETFIX NCA 1817 Tile adhesive for new construction, Plaster wall, Bathrooms & Kitchen.Coverage : 5 to 5.5 sqm per 20 kg bag at 3 mm bedding thickness.
CETFIX NSA 1917 Non-skid Tile on Tile adhesive for new construction, Plaster wall, Bathrooms & Swimming Pools.Coverage : 4.5 to 5 sqm per 20 kg bag at 3 mm bedding thickness.
CETFIX VTA 2117 Vitrified Tile adhesive for Vitrified Tiles for floor.Coverage : 4.5 to 5 sqm per 20 kg bag at 3 mm bedding thickness,.
CETFIX DSA 2317 Dholpur & Natural Stone adhesive, Internal & external vertical cladding.Coverage : 2 to 2.5 sqm per 20 kg bag at 6 mm bedding thickness.
CETFIX MTA 2217 Marble adhesive white for Marble fixing.Coverage : 2 to 2.5 sqm per 20 kg bag at 6 mm bedding thickness.
CETFIX GTA 2417 Marble adhesive white for Marble fixing.Coverage : Glass Mosaic 6 to 6.5 sqm per 20 kg bag at 1.5 mm bedding thickness
CETFIX FLEX 2717
:Heavy Duty Granite & Italian Marble fixing adhesive.
Also suitable for tile on wood & Plywood application.
Coverage : 2.5 to 3 sqm per 30 kg combo pack at 6 mm bedding thickness.
Ÿ
Ÿ
Ÿ
Ÿ
CETFIX BLA 2017
:Polymer modified Block Laying adhesives for AAC Block, Fly ash bricks & Hollow blocks.
Ÿ High adhesive strength, Improve overall masonry strength & load bearing capacity.
Ÿ Economical- Quantity of mortar is far less than conventional mortar.
Coverage : 8 to 9 sqm per 30 kg bag at 3 mm bedding thickness
CETFIX TG 2517Polymer based modified cementitious tile joint grout.
Ÿ Waterproof, Crack-proof, Peel-proof & uniform colour grout for filling joints of ceramics tiles, Vitrified tiles, marble, Natural stone, terrazzo, granite & glass mosaic tiles
CETFIX ETG 26173 part epoxy tile joint grout for industrial and laboratory area.
CETFIX ATG 2817
1st time introduces in India Acrylic based Tile grout for accommodate physical & thermal movement properties.
Admixture Divisionwww.cetproof.com
CETPROOF IWL 117/ IWC 217
Advantages:
CETPROOF CA 1417
Advantages:
Dose :
CETPROOF PA 1717
Dose :
Packing:
Integral waterproofing liquid for Concrete & Plaster
Ÿ
Ÿ
Ÿ
Ÿ
200 g, 1kg, 5kg, 10 kg, 20 kg, 50 kg & 225 kg.
Ÿ
Ÿ
Ÿ
50 kg & 225 kg Drum
Ÿ
Ÿ
Ÿ
50 kg & 200 kg Drum.
Improves workability of concrete.
Reduces permeability through the depth of concrete.
Prevents segregation & Bleeding.
Prevents formation of cracks due to reduction in shrinkage.
Dose : 140 g to 200 g per bag of cement during concrete slab casting.
Packing:
General purposed concrete admixture. It helps in achieving increased workability in all concrete and better retention of slump.
Increase workability of concrete. Increased Strength & Durability.
Easier placing compaction and finishing.
Higher cohesion, reduction risk of segregation & bleeding.
150 g to 250 g per bag of cement during concrete casting where high workability & Strength required.
Packing:
Liquid integral waterproofing admixture for Plasters & Mortar
Increases plasticity,
Easier speeding & adjustment of bricks & Block.
Reduces dropping & wastage of the mortar cost saving.
200 g per bag of cement for internal & external plaster.
CETPATCH 3317
Advantages:
CETPATCH PV 3417
Advantages:
CETCRACK 3617
Advantages:
Polymer modified ready mixed dry mortar for concrete and cement floors
High compressive & bonding strength.
Ready to use, factory controlled eliminates on site mixing.
Non shrink & easy to use just water mix and apply.
Industrial concrete floors, Parking decks, Bedding gadi for leveling surface for tile and save tile adhesive materials.
Polymer modified Ready mixed dry polymer vata for bathroom & parapet
Good adhesion & high bonding strength.
Ready to use, factory controlled eliminates on site mixing, easy to use
just water mix and apply.
High compressive & tensile strength
Idea for patch work, Spelled concrete, repairing floors & pre-cat slabs.
Polymer modified crack filler powder for repairing of cracks in internal & external plaster.
Good adhesion & high tensile strength.
Smooth finish.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Area :